CuII Species Research Articles

In-situ activation of biomimetic single-site bioorthogonal nanozyme for tumor-specific combination therapy

Copper-catalyzed click chemistry offers creative strategies for activation of therapeutics without disrupting biological processes. Despite tremendous efforts, current copper catalysts face fundamental challenges in achieving high efficiency, atom economy, and tissue-specific selectivity. Herein, we develop a facile “mix-and-match synthetic strategy” to fabricate a biomimetic single-site copper-bipyridine-based cerium metal-organic framework (Cu/Ce-MOF@M) for efficient and tumor cell-specific bioorthogonal catalysis. This elegant methodology achieves isolated single-Cu-site within the MOF architecture, resulting in exceptionally high catalytic performance. Cu/Ce-MOF@M favors a 32.1-fold higher catalytic activity than the widely used MOF-supported copper nanoparticles at single-particle level, as first evidenced by single-molecule fluorescence microscopy. Furthermore, with cancer cell-membrane camouflage, Cu/Ce-MOF@M demonstrates preferential tropism for its parent cells. Simultaneously, the single-site CuII species within Cu/Ce-MOF@M are reduced by upregulated glutathione in cancerous cells to CuI for catalyzing the click reaction, enabling homotypic cancer cell-activated in situ drug synthesis. Additionally, Cu/Ce-MOF@M exhibits oxidase and peroxidase mimicking activities, further enhancing catalytic cancer therapy. This study guides the reasonable design of highly active heterogeneous transition-metal catalysts for targeted bioorthogonal reactions.

Textural Precursor Compositions Harvested for Independent Signal Generators: Scaling Micron-Sized Flower-Like Metal-Organic Frameworks as Amplifying Units for Dual-Mode Glycoprotein Assay.

In this work, a micron-sized flower-like metal-organic frameworks (MOFs)-based boronate-affinity sandwich-type immunoassay was fabricated for the dual-mode glycoprotein assay. For proof of concept, the flower-like MOFs were synthesized from transition Cu nodes and tetrakis (4-carboxyphenyl) porphyrin (TCPP) ligands by spontaneous standing assembly. In addition, the specificity toward glycoprotein involved the antigen recognition as well as covalent bonding via the boronate-glycan affinity, and the immediate signal responses were initiated by textural decomposition of the flower-like MOFs. Intriguingly, Cu nodes, of which the valence state is dominant by CuI species, can endow the Fenton-like catalytic reaction of the fluorogenic substrate for generating fluorescence signals. For benefits, TCPP ligands, in which each TCPP molecule has four guest donors, can provide multiple valences for the assembly of cyclodextrin-capped gold nanoparticles via host-guest interaction for colorimetry output. Albeit important, the scaling micrometer patterns for the flower-like MOFs carrying numerous Cu nodes and TCPP ligands can also function as amplifying units, signifying the output signal. The detection limit of the dual-mode glycoprotein assay can reach 10.5 nM for the fluorescence mode and 18.7 nM for the colorimetry mode, respectively. Furthermore, the merits of harvesting different signal generators toward the multimodal readout patterns can allow the mutual verification and make the analytical results more reliable. Collectively, our proposed assay may offer a new idea in combining the inherent textural merits from MOFs for dual signal generators, which can also emphasize accurate detection capability for glycoprotein assay.

Catalytically Relevant Organocopper(III) Complexes Formed through Aryl-Radical-Enabled Oxidative Addition.

Stepwise oxidative addition of copper(I) complexes to form copper(III) species via single electron transfer (SET) events has been widely proposed in copper catalysis. However, direct observation and detailed investigation of these fundamental steps remain elusive owing largely to the typically slow oxidative addition rate of copper(I) complexes and the instability of the copper(III) species. We report herein a novel aryl-radical-enabled stepwise oxidative addition pathway that allows for the formation of well-defined alkyl-CuIII species from CuI complexes. The process is enabled by the SET from a CuI species to an aryl diazonium salt to form a CuII species and an aryl radical. Subsequent iodine abstraction from an alkyl iodide by the aryl radical affords an alkyl radical, which then reacts with the CuII species to form the alkyl-CuIII complex. The structure of resultant [(bpy)CuIII(CF3)2(alkyl)] complexes has been characterized by NMR spectroscopy and X-ray crystallography. Competition experiments have revealed that the rate at which different alkyl iodides undergo oxidative addition is consistent with the rate of iodine abstraction by carbon-centered radicals. The CuII intermediate formed during the SET process has been identified as a four-coordinate complex, [CuII(CH3CN)2(CF3)2], through electronic paramagnetic resonance (EPR) studies. The catalytic relevance of the high-valent organo-CuIII has been demonstrated by the C-C bond-forming reductive elimination reactivity. Finally, localized orbital bonding analysis of these formal CuIII complexes indicates inverted ligand fields in σ(Cu-CH2) bonds. These results demonstrate the stepwise oxidative addition in copper catalysis and provide a general strategy to investigate the elusive formal CuIII complexes.

Cyclable CuⅠ-Ov-Mn sites accelerate O2 activation to enhance photo-driven catalytic oxidation performance

Molecular oxygen activation (MOA) plays a crucial function in various oxidation reactions. Nonetheless, facile, continuous and efficient MOA remains challenging. Herein, we have successfully constructed recyclable CuⅠ-Ov-Mn sites (Ov: oxygen vacancy) for MOA by incorporating Cu single atoms in MnO2 matrix. The localized photogenerated electron at CuⅡ site drives the generation of electron-rich CuⅠ species and an adjacent photoinduced Ov, which possesses stronger O2 affinity and affords a durable O2 activation site. The CuⅡ/CuⅠ cycle accelerates the separation of charge carriers to supply adequate photogenerated electrons and assures the renewability of photoinduced Ov, thus realizing rapid and sustained O2 activation and generating abundant monatomic oxygen ions (O-). Consequently, Cu-MnO2 catalyst performed extraordinarily high activity in O2-involved reactions. For instance, in toluene oxidation, toluene conversion reached as high as 96 %, comparable to that on the state-of-the-art supported Pt catalysts. This work will bring more possibilities for modulating the O2-involved oxidative reactions.

Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3.

The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.

Switching Electrocatalytic Hydrogen Evolution Pathways through Electronic Tuning of Copper Porphyrins

AbstractThe electronic structure of metal complexes plays key roles in determining their catalytic features. However, controlling electronic structures to regulate reaction mechanisms is of fundamental interest but has been rarely presented. Herein, we report electronic tuning of Cu porphyrins to switch pathways of the hydrogen evolution reaction (HER). Through controllable and regioselective β‐oxidation of Cu porphyrin 1, we synthesized analogues 2–4 with one or two β‐lactone groups in either a cis or trans configuration. Complexes 1–4 have the same Cu‐N4 core site but different electronic structures. Although β‐oxidation led to large anodic shifts of reductions, 1–4 displayed similar HER activities in terms of close overpotentials. With electrochemical, chemical and theoretical results, we show that the catalytically active species switches from a CuI species for 1 to a Cu0 species for 4. This work is thus significant to present mechanism‐controllable HER via electronic tuning of catalysts.

Sterically Congested Protecting Group for a Boronyl Group in Iterative Aminations.

In this study, we found that the sterically bulky α-hydroxycarboxamide moiety is a suitable framework for protecting the boronyl group of boron reagents during aminations. Condensation of α-hydroxycarboxamide with ArB(OH)2 produced aryloxazaborolidinone (ArOxB). The reactivity of the C-B bond in ArOxB is easily controlled by the steric and weak electronic effects of the backbone. H2N-(or Br-)ArOxB underwent Chan-Evans-Lam (C-E-L) or Buchwald-Hartwig (B-H) amination with retaining the C-B bond. On the other hand, direct C-E-L amination of ArOxB was also possible in an oxidative atmosphere, in which the C-B bond was activated by CuII species. Our methodology is effective for the precise synthesis of two or more arylamino group substituted arenes.

Mechanistic insights into copper-mediated benzylic C(sp3)-H bond trifluoromethylation.

The mechanisms underlying copper-mediated trifluoromethylation of benzylic C(sp3)-H bonds were investigated using density functional theory (DFT) calculations. Two distinct pathways were identified: radical recombination/reductive elimination and single-electron transfer (SET). In the radical recombination/reductive elimination pathway, the CuII species recombines with benzyl radicals to generate a CuIII intermediate, which subsequently undergoes reductive elimination. Conversely, the SET pathway involves single-electron transfer from benzyl radicals to CuII species, forming a cationic benzylic intermediate and CuI species, followed by coupling with a CF3 group coordinated to Cu. DFT calculations revealed that the radical recombination/reductive elimination pathway is favoured for trifluoromethylation of primary and secondary benzylic C(sp3)-H bonds, with the reductive elimination step being rate-determining. In contrast, the SET pathway exhibits preference for trifluoromethylation of tertiary benzylic C(sp3)-H bonds. These mechanistic insights have significant implications for enhancing the selectivity of copper-mediated trifluoromethylation reactions.

Amphoteric reactivity of a putative Cu(II)-mCPBA intermediate.

In copper-based enzymes, Cu-hydroperoxo/alkylperoxo species are proposed as key intermediates for their biological activity. A vast amount of literature is available on the functional and structural mimics of enzymatic systems with heme and non-heme ligand frameworks to stabilize high valent metal intermediates, mostly at low temperatures. Herein, we report a reaction between [CuI(NCCH3)4]+ and meta-chloroperoxybenzoic acid (mCPBA) in CH3CN that produces a putative CuII(mCPBA) species (1). 1 was characterized by UV/Vis, resonance Raman, and EPR spectroscopies. 1 can catalyze both electrophilic and nucleophilic reactions, demonstrating its amphoteric behavior. Additionally, 1 can also conduct electron transfer reactions with a weak reducing agent such as diacetyl ferrocene, making it one of the reactive copper-based intermediates. One of the most important aspects of the current work is the easy synthesis of a CuII(mCPBA) adduct with no complicated ligands for stabilization. Over time, 1 decays to form a CuII paddle wheel complex (2) and is found to be unreactive towards substrate oxidation.

Ultrahigh density copper (Ⅰ) single atom enzymes for tumor self-cascade catalytic therapy

Cu (Ⅰ) single-atom enzymes (SAEs) have attracted considerable attention in tumor sequential catalysis therapy. However, their complex preparation process, lower atom loading capacity and uncontrollable valence state limit their clinical practices. Herein, we propose a convenient strategy for preparing Cu (Ⅰ) SAEs through the self-carbonization and reduction of organic solvents and CuⅡ salts. Formamide can easily be condensed into a linear macromolecular chain for chelating CuⅡ because of its high N content and vacant ligand sites. The resultant carbon nitride-based fragments reduce CuⅡ to CuⅠ. An unprecedented sequential catalytic performance for glutathione depletion and subsequent amplified hydroxyl radical generation is performed on the obtained C3N4 supported Cu (Ⅰ) SAEs (denoted as Cu-CN) with an ultrahigh density of 2.19 atoms/nm2 (23.36 wt%), in which the CuⅠ species serve as the active sites. The subversion of the homeostasis of the tumor microenvironment brought about by the Cu-CN produces efficient ferroptosis and apoptosis in cancer cells, resulting in a high tumor inhibition rate of 89.17 %. This study provides a novel strategy for fabricating valence controlled SAEs supported on C3N4 for catalytic applications.

Well‐defined poly(N,N‐dimethylacrylamide) from a fast Cu(0)‐mediated reversible‐deactivation radical polymerization in water

AbstractCopper‐catalyzed reversible deactivation radical polymerization (RDRP) of N,N‐dimethylacrylamide (DMA) has been a significant challenge, particularly in aqueous environments, such as low yields, broad molecular weight distribution (MWD), and ill‐controlled molecular weights (MWs). In this work, we report the synthesis of well‐defined poly(N,N‐dimethylacrylamide) (PDMA) via a facile Cu(0)‐mediated RDRP in water. The results show that, unlike other acrylamide monomers, for DMA with abundant tertiary amide groups, the sufficient deactivation—the key to realizing control in copper‐catalyzed RDRP—cannot be simply fulfilled by just increasing the amount of deactivator (i.e., CuII species). The enhanced deactivation must be appropriately determined by also considering and selecting other reaction parameters. It is demonstrated that the use of methyl 2‐chloropropionate (MCP) as initiator and copper(II) chloride (CuCl2) as the additional catalyst is an effective combination to simultaneously enhance the deactivation control and facilitate the chain growth in aqueous Cu(0)‐mediated RDRP of DMA. This strategy successfully achieved the fast and well‐controlled synthesis of PDMAs with high monomer conversion, narrow MWDs, and a range of predefined MWs, and the well‐controlled in situ chain extensions.

Effects and Mechanisms of Cu Species in Fe-MOFs on Fenton-Like Catalytic Activity and Stability.

Fe-based MOFs (Fe-MOFs) are deemed promising Fenton-like catalysts due to their well-developed pores and accessible active sites. However, their inferior catalytic activity, iron leaching, and low H2O2 utilization always hinder their application as Fe-based MOF catalysts. In this work, we manipulated the structure of Fe-oxo nodes in MIL-88B(Fe) via a CuI species substitution method, affording a mixed-valence (Cu-incorporated Fe-MOFs) with highly improved Fenton-like performance. It is found that the CuI serves as a shuttle to promote transfer between FeII/FeIII, inducing the formation of a larger amount of stable FeII sites, which was proven by experimental and DFT calculation results. A linear relationship was observed for the Fenton-like performance and the amount of CuI species for the catalysts. The corresponding value of the •OH formation is 2.17 eV for Cu-incorporated MIL-88B(Fe), which is significantly lower than that of MIL-88B(Fe) (2.69 eV). Meanwhile, the enriched CuI species suppress Fe species leaching during the catalytic reaction. The Fe-ion leakage of 0.4Cu@MIL-88B is very tiny (0.01-0.03 mg/L), significantly less than that of MIL-88B (2.00-3.02 mg/L). At the same time, H2O2 utilization for 0.4Cu@ MIL-88B(Fe) is 88%, which is almost 4.4 times that of pure MIL-88B(Fe). This work provides insights into the rational design of Fe-MOFs as promising Fenton-like catalysts for wastewater treatment.

Cu-loaded MOF-303 for iodine adsorption: The roles of Cu species and pyrazole ligands

The capture of toxic radioiodine is an increasingly important priority for the safe development of nuclear energy. Copper is a promising alternative for expensive silver to capture iodine. To develop novel copper-based adsorbents and determine the effect of copper species on iodine adsorption, the metal–organic framework with dual-pyrazole ligands (MOF-303) is employed as the scaffold to bind Cu2+ species. Cu0 nanoparticles were formed after the reduction by NaBH4. The obtained Cu2+-MOF-303 and Cu0-MOF-303 show high iodine uptake capacities at 353 K, 747 mg·g−1 and 837 mg·g−1, respectively. They also show high iodine uptake capacities of more than 300 mg·g−1 at a high temperature (423 K), which are better than other Cu-based adsorbents. Besides, the loading of Cu can enhance the iodine selectivity under humid vapor, and iodine adsorption rate in iodine-cyclohexane solutions. The Cu0 on Cu0-MOF-303 can react with iodine directly via the redox mechanism. For Cu2+-MOF-303, the adjacent pyrazole ligands can chelate with Cu2+ ions strongly and transfer charges to trapped iodine to form polyiodide anions, and thus stable CuI species could also be generated. The strategy of anchoring Cu species using MOF-303 provides large channels for iodine diffusion, and highly-dispersed Cu and N sites for iodine capture.

Elucidating the reaction mechanism of SO2 with Cu-CHA catalysts for NH3-SCR by X-ray absorption spectroscopy.

The application of Cu-CHA catalysts for the selective catalytic reduction of NOx by ammonia (NH3-SCR) in exhaust systems of diesel vehicles requires the use of fuel with low sulfur content, because the Cu-CHA catalysts are poisoned by higher concentrations of SO2. Understanding the mechanism of the interaction between the Cu-CHA catalyst and SO2 is crucial for elucidating the SO2 poisoning and development of efficient catalysts for SCR reactions. Earlier we have shown that SO2 reacts with the [Cu2II(NH3)4O2]2+ complex that is formed in the pores of Cu-CHA upon activation of O2 in the NH3-SCR cycle. In order to determine the products of this reaction, we use X-ray absorption spectroscopy (XAS) at the Cu K-edge and S K-edge, and X-ray emission spectroscopy (XES) for Cu-CHA catalysts with 0.8 wt% Cu and 3.2 wt% Cu loadings. We find that the mechanism for SO2 uptake is similar for catalysts with low and high Cu content. We show that the SO2 uptake proceeds via an oxidation of SO2 by the [Cu2II(NH3)4O2]2+ complex, resulting in the formation of different CuI species, which do not react with SO2, and a sulfated CuII complex that is accumulated in the pores of the zeolite. The increase of the SO2 uptake upon addition of oxygen to the SO2-containing feed, evidenced by X-ray adsorbate quantification (XAQ) and temperature-programmed desorption of SO2, is explained by the re-oxidation of the CuI species into the [Cu2II(NH3)4O2]2+ complexes, which makes them available for reaction with SO2.

Cu-α-diimine Compounds Encapsulated in Porous Materials as Catalysts for Electrophilic Amination of Aromatic C-H Bonds.

Electrophilic amination has emerged as a more environmentally benign approach to construct arene C-N bonds. However, heterogeneous catalysts remain largely unexplored in this area, even though their use could facilitate product purification and catalyst recovery. Here we investigate strategies to heterogenize a Cu(2,2'-bipyridine) catalyst for the amination of arenes lacking a directing group with hydroxylamine-O-sulfonic acid (HOSA). Besides immobilization of Cu on a metal-organic framework (MOF) or covalent organic framework (COF) with embedded 2,2'-bipyridines, a ship-in-a-bottle approach was followed in which the Cu complex is encapsulated in the pores of a zeolite. Recyclability and hot centrifugation tests show that zeolite Beta-entrapped CuII(2,2'-bipyridine) is superior in terms of stability. With N-methylmorpholine as a weakly coordinating, weak base, simple arenes, such as mesitylene, could be aminated with yields up to 59%, corresponding to a catalyst TON of 24. The zeolite could be used in three consecutive runs without a decrease in activity. Characterization of the catalyst by EPR and XAS showed that the active catalytic complex consisted of a site-isolated CuII species with one 2,2'-bipyridine ligand.

Strikingly distinctive NH3-SCR behavior over Cu-SSZ-13 in the presence of NO2

Commercial Cu-exchanged small-pore SSZ-13 (Cu-SSZ-13) zeolite catalysts are highly active for the standard selective catalytic reduction (SCR) of NO with NH3. However, their activity is unexpectedly inhibited in the presence of NO2 at low temperatures. This is strikingly distinct from the NO2-accelerated NOx conversion over other typical SCR catalyst systems. Here, we combine kinetic experiments, in situ X-ray absorption spectroscopy, and density functional theory (DFT) calculations to obtain direct evidence that under reaction conditions, strong oxidation by NO2 forces Cu ions to exist mainly as CuII species (fw-Cu2+ and NH3-solvated CuII with high CNs), which impedes the mobility of Cu species. The SCR reaction occurring at these CuII sites with weak mobility shows a higher energy barrier than that of the standard SCR reaction on dynamic binuclear sites. Moreover, the NO2-involved SCR reaction tends to occur at the Brønsted acid sites (BASs) rather than the CuII sites. This work clearly explains the strikingly distinctive selective catalytic behavior in this zeolite system.

Over 70 % Faradaic Efficiency for CO2 Electroreduction to Ethanol Enabled by Potassium Dopant‐Tuned Interaction between Copper Sites and Intermediates

AbstractIt is highly desired yet challenging to steer the CO2 electroreduction reaction (CO2ER) toward ethanol with high selectivity, for which the evolution of reaction intermediates on catalytically active sites holds the key. Herein, we report that K doping in Cu2Se nanosheets array on Cu foam serves as a versatile way to tune the interaction between Cu sites and reaction intermediates in CO2ER, enabling highly selective production of ethanol. As revealed by characterization and simulation, the electron transfer from K to Se can stabilize CuI species which facilitate the adsorption of linear *COL and bridge *COB intermediates to promote C−C coupling during CO2ER. As a result, the optimized K11.2%‐Cu2Se nanosheets array can catalyze CO2ER to ethanol as a single liquid product with high selectivity in a potential area from −0.6 to −1.2 V. Notably, it offers a Faradaic efficiency of 70.3 % for ethanol production at −0.8 V with as is stable for 130 h.

Over 70 % Faradaic Efficiency for CO2 Electroreduction to Ethanol Enabled by Potassium Dopant-Tuned Interaction between Copper Sites and Intermediates.

It is highly desired yet challenging to steer the CO2 electroreduction reaction (CO2 ER) toward ethanol with high selectivity, for which the evolution of reaction intermediates on catalytically active sites holds the key. Herein, we report that K doping in Cu2 Se nanosheets array on Cu foam serves as a versatile way to tune the interaction between Cu sites and reaction intermediates in CO2 ER, enabling highly selective production of ethanol. As revealed by characterization and simulation, the electron transfer from K to Se can stabilize CuI species which facilitate the adsorption of linear *COL and bridge *COB intermediates to promote C-C coupling during CO2 ER. As a result, the optimized K11.2% -Cu2 Se nanosheets array can catalyze CO2 ER to ethanol as a single liquid product with high selectivity in a potential area from -0.6 to -1.2 V. Notably, it offers a Faradaic efficiency of 70.3 % for ethanol production at -0.8 V with as is stable for 130 h.

The Structure of Monomeric Hydroxo-CuII Species in Cu-CHA. A Quantitative Assessment.

Using EPR and HYSCORE spectroscopies in conjunction with ab initio calculations, we assess the structure of framework-bound monomeric hydroxo-CuII in copper-loaded chabazite (CHA). The species is an interfacial distorted square-planar [CuIIOH(O-8MRs)3] complex located at eight-membered-ring windows, displaying three coordinating bonds with zeolite lattice oxygens and the hydroxo ligand hydrogen-bonded to the cage. The complex has a distinctive EPR signature with g = [2.072 2.072 2.290], CuA= [30 30 410] MHz, and HA = [−13.0 −4.5 +11.5] MHz, distinctively different from other CuII species in CHA.

Intricacies and Mechanism of p‐Doping Spiro‐MeOTAD Using Cu(TFSI)2

AbstractCopper salts are a popular choice as p‐dopants for organic semiconductors, particularly in N2,N2,N2′,N2′,N7,N7,N7′,N7′‐octakis(4‐methoxyphenyl)‐9,9′‐spirobi[9H‐fluoren]‐2,2′,7,7′‐tetramine (Spiro‐MeOTAD) hole transport material for solar cells. While being exceptionally effective, no scientific consensus about their doping mechanism has been established so far. This study describes the thermodynamic equilibria of involved species in copper(II) bis(trifluoromethanesulfonyl)imide (Cu(TFSI)2) doped, co‐evaporated Spiro‐MeOTAD. A temperature‐independent formation of charge transfer states is found, followed by an endothermic release of free charge carriers. Impedance and electron paramagnetic resonance spectroscopy unravel low activation energies for hole release and hopping transport. As a result, (52.0 ± 6.4)% of the total Cu(TFSI)2 molecules form free, dissociated holes at 10 mol% and room temperature. CuI species arising out of doping are stabilized by formation of a [CuI(TFSI)2]‐ cuprate, inhibiting elemental copper formation. This CuI species presents a potent hole trap reducing their mobility, which can be averted by simple addition of a bathocuproine complexing agent. A nonlinear temperature‐dependent conductivity and mobility that contradicts current charge transport models is observed. This is attributed to a combination of trap‐ and charge transfer state freeze‐out. These insights may be adapted to other metal salts, providing guidelines for designing next‐generation ultra‐high efficiency dopants.