CT Three-dimensional Reconstruction Research Articles

Innovation and development of surgical techniques for pancreatic tumors

In recent years, great progress has been made in the diagnosis and treatment of pancreatic tumors. In terms of diagnosis, three-dimensional CT reconstruction, PET-CT scan, endoscopic ultrasound with needle biopsy are used to evaluate the benign or malignant stage and biological characteristics of the tumor, to make treatment decisions more scientific and reasonable. In terms of treatment, new technologies, such as arterial priority arterial sheath dissection and radical resection of the retroperitoneal lipo-lymphatic layer, have continuously emerged to improve radical curability of tumors. For benign or low-grade malignant pancreatic tumors, function-preserving surgery is adopted to avoid long-term complications. Minimally invasive pancreatic surgery has advanced in leaps and bounds. Both standard radical surgery and function-preserve surgery can be performed under a laparoscope or robot. Non-surgical treatment has developed quickly with each passing day; for locally advanced or metastatic pancreatic cancer, neoadjuvant therapy is expected to be down-staged or transformed into surgery. These advances in diagnosis and treatment technology have led to multidisciplinary teamwork. Based on accurate assessment, giving full play to the advantages of laparoscopic and robotic systems in diagnosis and treatment, attaching importance to comprehensive nonsurgical treatment and doctor-patient communication with care throughout the process, these are keys to improve the clinical efficacy of pancreatic tumors in the era of minimally invasive surgery.

Correlation between femoral offset, rotation center and leg length discrepancy after total hip arthroplasty based on digital analysis

CT scans combined with Mimics software were used to measure femoral offset (FO), rotation center height (RCH) and lower leg length discrepancy (LLD) following total hip arthroplasty (THA), and the relationship between FO, RCH and LLD after THA is discussed. Retrospective analysis was performed on 40 patients with unilateral THA who met standard cases from October 2020 to June 2022. There were 21 males and 19 females, 18 patients on the left side and 22 patients on the right side, aged range from 30 to 81 years old, with an average age of (58.90 ±14.13) years old, BMI ranged from 17.3 to 31.5 kg·m-2 with an average of (25.3±3.4) kg·m-2. There were 30 cases of femoral head necrosis (Ficat type Ⅳ), 2 cases of hip osteoarthritis (Tönnis type Ⅲ), 2 cases of developmental hip dislocation combined with end-stage osteoarthritis (Crowe type Ⅲ), and 6 cases of femoral neck fracture (Garden type Ⅳ). Three-dimensional CT reconstruction of pelvis was taken preoperative and postoperative, and three-dimensional reconstruction model was established after processing by Mimics software. FO, RCH and LLD were measured on the model. The criteria for FO reconstruction were as follows:postoperative bilateral FO difference less than 5 mm;the standard for equal length of both lower limbs was as follows:postoperative LLD difference less than 5 mm. Bilateral FO difference was positively correlated with LLD (r=0.744, P<0.001). Chi-square test was performed between the FO reconstructed group and the non-reconstructed eccentricity group:The results showed that the isometric ratio of lower limbs in the FO reconstructed group was significantly higher than that in the FO reconstructed group (χ2=6.320, P=0.012). The bilateral RCH difference was significantly negatively correlated with LLD(r=-0.877, P<0.001). There is a linear relationship between bilateral FO difference and bilateral RCH difference and postoperative LLD, and the linear regression equation is satisfied:postoperative LLD=0.038x-0.099y+0.257(x:postoperative bilateral FO difference, y:postoperative bilateral RCH difference; Unit:cm), F=77.993, R2=0.808, P=0.009. After THA, LLD increased with the increase of FO and decreased with the increase of RCH. The effect of lower limb isometric length can be obtained more easily by reconstruction of FO. There is a linear relationship between the bilateral FO difference and the bilateral RCH difference after THA and LLD, and the regression equation can provide a theoretical reference for judging LLD.

Influence of anterior fracture line on anterior cortical reduction loss after cephalomedullary nail fixation in intertrochanteric fractures

To investigate the position of the anterior fracture line in AO/Orthopaedic Trauma Association (AO/OTA) type A2 unstable intertrochanteric fractures and its impact on the incidence of anterior cortical reduction loss after cephalomedullary nail fixation. A clinical data of 95 patients with intertrochanteric fractures who met the selection criteria between April 2020 and February 2023 was retrospectively analyzed. All patients were treated with cephalomedullary nail fixation, and the intra- and post-operative imaging data were complete. Among them, there were 37 males and 58 females. The age ranged from 61 to 97 years, with an average of 79.6 years. The time from injury to operation ranged from 7 hours to 11 days, with an average of 2.8 days. According to the 2018-AO/OTA classification standard, there were 39 cases of type 31-A2.2 and 56 cases of type 31-A2.3. Intraoperative fluoroscopy was used to record the number of patients with satisfactory fracture alignment. The preoperative CT data were imported into Mimics17.0 software to simulate the fracture reduction and measure the distance between the anterior fracture line and the intertrochanteric line bony ridge. The fractures were classified as transcapsular fractures, extra-capsular fractures, and intra-capsular fractures according to the distance. CT three-dimensional reconstruction was performed within 2 weeks after operation to observe the number of patients with anterior cortical reduction loss. The postoperative anterior cortical reduction loss incidence in patients with satisfactory fracture alignment, and the relationship between postoperative anterior cortical reduction loss and the position of the anterior fracture line were observed. There were 52 cases (54.7%) of transcapsular fractures, 24 cases (25.3%) of extra-capsular fractures, and 19 cases (20.0%) of intra-capsular fractures. Among them, 41 of the 52 transcapsular fractures had satisfactory fracture alignment, and 4 (9.8%) of them experienced anterior cortical reduction loss after operation; 19 of the 24 extra-capsular fractures had satisfactory fracture alignment, and no anterior cortical reduction loss occurred; 16 of the 19 intra-capsular fractures had satisfactory fracture alignment, and 7 (43.8%) of them experienced anterior cortical reduction loss after operation. There was a significant difference in the incidence of anterior cortical reduction loss between groups ( χ 2=8.538， P=0.003). All patients were followed up 3-26 months (mean, 9 months). Among them, 91 cases had fracture healing, and 4 cases had nonunion. In AO/OTA type A2 unstable intertrochanteric fractures, where the anterior fracture line is located within the joint capsule, there is a high risk of anterior cortical reduction loss after operation.

Arthroscopic suspension fixation with Endobutton in treatment of tibial insertion avulsion fractures of posterior cruciate ligament

To investigate the effectiveness of arthroscopic suspension fixation with Endobutton in the treatment of tibial insertion avulsion fractures of posterior cruciate ligament (PCL). A retrospective analysis was conducted on the clinical data of 52 patients (52 knees) with tibial insertion avulsion fractures of PCL, who were treated by arthroscopic suspension fixation with Endobutton between June 2017 and October 2022. There were 29 males and 23 females, with an average age of 40.6 years (range, 19-66 years). There were 24 cases of traffic accident injuries, 17 cases of sports injuries, and 11 cases of fall injuries. The time from injury to operation ranged from 6 to 19 days (mean, 13.3 days). According to the Meyers-McKeever classification, there were 30 cases of type Ⅱ and 22 cases of type Ⅲ fractures. All patients exhibited positive posterior drawer test results. Preoperative knee joint function was assessed with Lysholm score (21.3±6.7), International Knee Documentation Committee (IKDC) score (20.7±5.8), and visual analogue scale (VAS) score (5.3±0.7); and knee joint range of motion was (41.73±3.17)°. Based on preoperative CT three-dimensional reconstruction measurements, the longitudinal diameter of the avulsed bone fragment ranged from 13 to 25 mm (mean, 18.1 mm). Operation time and occurrence of complications were recorded, and postoperative imaging was used to assess fracture healing. Knee joint function and pain severity were evaluated using knee joint range of motion, Lysholm score, IKDC score, and VAS score. The operation time ranged from 46 to 81 minutes (mean, 56.2 minutes). All patients were followed up 12-28 months (mean, 20.1 months). The iatrogenic fractures of bone fragments occurred during operation in 4 cases; and knee effusion occurred in 2 cases and anterior knee pain in 1 case after operation. All incisions healed by first intention. Imaging evaluations at 3 months after operation showed the fracture healing and no internal fixation failure. All patients demonstrated good knee function and had returned to normal activities at 12 months after operation. At last follow-up, the knee joint range of motion was (133.44±4.17)°, Lysholm score 93.6±3.1, IKDC score 93.4±2.5, and VAS score 1.0±0.6, with significant differences compared to preoperative scores ( P<0.05). Arthroscopic suspension fixation with Endobutton in the treatment of tibial insertion avulsion fractures of PCL is simple to operate, and the knee joint function recovers well.

Three-dimensional damage and rupture patterns of different thicknesses of rock mass with open joints under blast loading

There are an immense number of discontinuous structural surfaces represented by tensile joints in natural rock mass, in which the thickness of tensile joints determines the form how stress wave interacts with joint surface, which has a significant influence on the fracture behavior of jointed rock mass under blast loading. Open joint specimens were prepared using 3D printing technology, an indoor 3D blasting experiment was carried out with respect to different open joint thicknesses. Through CT scanning and three-dimensional reconstruction, the rupture and the distribution patterns of three-dimensional cracks of the post-blasting specimens were compared, and the rupture characteristics of the rock masses with different open joint thicknesses under blast loading were analyzed. The blasting process of the rock masses with open joints was inverted by AUTODYN numerical simulation software, the effects of open joint thickness on the propagation of stress wave and the three-dimensional damage characteristics of rock mass were revealed. Results showed that under the blast load, the wing cracks derived from the end of the open joints are greatly affected by the thickness of the joints and as the joint thickness increases, the annular derived cracks formed on the right outer surface of the specimen gradually decrease. In case of a change in the open joint thickness, the intensity at which the stress wave diffracts and transmits through the end of the joint will be directly affected. This makes it hard for the wing cracks at the end to initiate, the distribution density of the radial tension cracks traversing through the open joint surface attenuates obviously, resulting in the decrease of the fractal dimension and the damage extent of the specimen. As the thickness of open joints increases, the blast stress wave running through the joint surface will endure a time delay and reduced intensity, the closure of the joint surface gradually reduces, and the degree of stress concentration at the end gets weak. In the course of stress wave propagation, the rock mass on the back-blast side of the joint endures the combined actions of compressive stress field, tensile and tangential stress field and compressive and tangential stress field. As the thickness of open joint increases, the time point for the back-blast side to reach the peak stress is delayed, the intensity of the composite stress field subjected to compressive and tangential stress field decreases, and the normal displacements on the near-blast side and the back-blast side of the joint follow the opposite trend.

Full-Scale Pore Structure Characterization and Its Impact on Methane Adsorption Capacity and Seepage Capability: Differences between Shallow and Deep Coal from the Tiefa Basin in Northeastern China

Deep low-rank coalbed methane (CBM) resources are numerous and widely distributed in China, although their exploration remains in its infancy. In this work, gas adsorption (N2/CO2), mercury intrusion porosimetry, and 3D CT reconstruction were performed on five coal samples of deep and shallow low-rank coal from northeast China to analyze their pore structure. The impact of the features in the pore structure at full scale on the capacity for methane adsorption and seepage is discussed. The results indicate that there are significant differences between deep low-rank coal and shallow low-rank coal in terms of porosity, permeability, composition, and adsorption capacity. The full-scale pore distribution was dispersed over a broad range and exhibited a multi-peak distribution, with the majority of the peak concentrations occurring between 0.45–0.7 nm and 3–4 nm. Mesopores are prevalent in shallow coal rock, whereas micropores are the most numerous in deep coal rock. The primary contributors to the specific surface area of both deep and superficial coal rock are micropores. Three-dimensional CT reconstruction can characterize pores with pore size greater than 1 μm, while the dominating equivalent pore diameters (Deq) range from 1 to 10 μm. More mini-scale pores and fissures are observed in deep coal rock, while shallow coal rock processes greater total and connection porosity. Multifractal features are prevalent in the fractal qualities of all the numbered samples. An enhancement in pore structure heterogeneity occurs with increasing pore size. The pore structure of deep coal rock is more heterogeneous. Furthermore, methane adsorption capacity is favorably connected with D1 (0.4 nm &lt; pore diameter ≤ 2 nm), D2 (2 nm &lt; pore diameter ≤ 5 nm), micropore volume, and specific surface area and negatively correlated with D3 (5 nm &lt; pore diameter ≤ 50 nm), showing that methane adsorption capability is primarily controlled by micropores and mesopores. Methane seepage capacity is favorably connected with the pore volume and connected porosity of macropores and negatively correlated with D4 (pore diameter &gt; 50 nm), indicating that the macropores are the primary factor influencing methane seepage capacity.

Radiological classification of the Heidelberg triangle and its application in laparoscopic pancreaticoduodenectomy for malignancies

BackgroundThe TRIANGLE operation benefits patients with pancreatic cancer; however, the Heidelberg triangle, where the operation occurs, contains vessels that can impact safety, especially in laparoscopic pancreaticoduodenectomy (LPD) with the TRIANGLE operation. This study aimed to identify Heidelberg triangle vessel types and their implications in pancreaticoduodenectomy (PD).MethodsRetrospective collection of radiographic data was performed from January 2017 to April 2023. Three-dimensional (3D) CT reconstructions were performed on patients. Vascular types in the Heidelberg triangle were classified based on named vessels crossing its interior. The impact of these types on surgical outcomes and complications in PD with the TRIANGLE operation was assessed.ResultsPreoperative CT reconstruction was conducted on 184 pancreatic surgery patients. The findings revealed 99 patients (53.8%) with the type I Heidelberg triangle, lacking named vessels crossing the interior. Type II (n = 85, 46.2%), with named vessels crossing the interior, was identified. Among reconstructed patients who underwent PD with the TRIANGLE operation (n = 103), they were categorized as type I (n = 57) or type II (n = 46). The results showed that LPD patients with type II had significantly higher median intraoperative blood loss (300 mL vs. 200 mL, P = 0.030) and mean examined lymph nodes (17.2 ± 7.6 vs. 13.4 ± 5.2, P = 0.019) compared to those with type I. No significant differences were found in operative time or postoperative complications.ConclusionThe presence of named vessels crossing the interior of the Heidelberg triangle was associated with increased intraoperative bleeding during LPD combined with the TRIANGLE operation. Therefore, targeted preoperative planning is required before the operation, thus improving the safety of the TRIANGLE operation in minimally invasive surgery.

Numerical simulation on gas behavior inside pellet based on X-ray micro-computed tomography

The objective of this work is to investigate gas behavior inside a realistic pellet model while varying inlet velocities and comparing it against published studies. A CT three-dimensional (3D) reconstruction technique was performed to construct a realistic pellet model from the two-dimensional (2D) tomographic images. The distribution of gas velocity, pressure, and species inside the pellet was investigated with computational fluid dynamics (CFD) and microfluidic boundary layer theory. The results indicated that pellet morphology, pore size, and position were responsible for the variability in velocity anisotropy inside the pellet. The pressure gradient between the windward and leeward sides of the pellet tended to rise as the inlet velocity increased, up to a maximum value of 4.2 Pa. Moreover, the pressure gradient resulted in a higher species concentration on the windward side, particularly at lower flow velocities. Finally, the potential effect of the pellet structure on the reduction process is proposed.

Retracted: The Application Value of CT Three-Dimensional Microscope Reconstruction Technology in the Diagnosis of Cervical Cancer

Retracted: The Application Value of CT Three-Dimensional Microscope Reconstruction Technology in the Diagnosis of Cervical Cancer

Analysis of Potential Risk Factors for Cement Leakage into Paraspinal Veins after Vertebroplasty for Acute Osteoporotic Vertebral Fractures Based on a 3D Reconstruction Technique: A Retrospective Matched Case-Control Study.

Pulmonary embolism, cardiac embolism, and even cerebral embolism due to paraspinal vein leakage (PVL) are increasingly reported, and their risk factors need to be adequately investigated for prevention. To this end, this study investigated the correlation of the distribution and morphological characteristics of fracture lines with the occurrence of PVL after percutaneous vertebroplasty (PVP), which has not been previously reported. Patients with acute single-segment thoracolumbar osteoporotic vertebral compression fractures (OVCFs) treated with PVP at our institution from January 2019 to July 2022 were selected for a matched case-control study. The case and control groups included those with and without PVL, respectively, matched at a 1:1 ratio based on general clinical characteristics. Additionally, fracture map and heatmap analysis was performed in both groups. In addition to the general clinical characteristics, the vertebral height ratio, puncture angle, delivery rate, and indexes were assessed via the three-dimensional CT reconstruction fracture line mapping technique, namely, the distribution of fracture lines, fracture line length, main fracture line shape, location of fracture line involvement, and number of fracture line branches, were compared between the two groups. The Wilcoxon rank-sum test, t tests, analysis of variance, and conditional logistic regression were used for statistical analysis. Among 658 patients with OVCFs, 54 who did and 54 who did not develop PVL were included in this study. Significant differences in the puncture angle, fracture line distribution (MR-1, ML-2, MM-2, MR-2, ML-3, MM-3, LL-1, LM-1, LL-2, LM-2), fracture line involvement of the posterior wall, total fracture line length, and main fracture line length were found between the two groups (p < 0.05). Logistic univariate analysis showed significant differences in the puncture angle, fracture line distribution (MR-1, ML-2, MM-2, MR-2, ML-3, MM-3, LL-1, LL-2, LM-2, LL-3), total fracture line length, main fracture line length, and fracture line involvement of the posterior wall between the two groups (p < 0.05). Logistic multifactorial analysis showed that the fracture line distribution (UR-3, ML-3, LM-2, LR-2) and main fracture line length were independent risk factors for the development of PVL in both groups. In addition, the fracture maps and heatmaps showed a greater degree of fracture line encapsulation and more extensive involvement in the middle and lower regions of the vertebral body in the PVL group than in the control group. Through a three-dimensional computed tomography reconstruction-based fracture line mapping technique, this study revealed for the first time that the distribution of fracture lines (UR-3, ML-3, LM-2, LR-2) and main fracture line length were independent risk factors for PVL after PVP in patients with acute single-segment thoracolumbar OVCFs. In addition, we hypothesized that the fracture line-vein traffic branch that may appear within 2 weeks after injury in acute OVCF patients may be one of the mechanisms influencing the above potential independent risk factors associated with PVL.

Inclined angles of acetabular quadrilateral plate: digital measurement and clinical application of the new anatomical concept

PurposeMatta scoring standard is one of the most frequently used postoperative imaging evaluations for acetabular fracture reduction, but has obvious shortcomings. This study, for the first time, proposed the concept of inclined angles of acetabular quadrilateral plate. The purpose of this study was to investigate the normal range of the inclined angles in adults by digital measurement and explore the feasibility of using them to evaluate the reduction quality of acetabular quadrilateral fractures after surgery.MethodsFirstly, the pelvic CT three-dimensional reconstruction data of 40 healthy adults including 20 males and 20 females were collected. The normal range of the anterior, middle, and posterior inclined angles were measured via Mimics software. Secondly, a modified Matta criteria that combined the classic Matta criteria and evaluation criteria of the inclined angles was proposed. And we classified modified Matta criteria into three grades including excellent, good and poor. Finally, a total of 125 cases with quadrilateral plate fractures was included and the postoperative CT data were analyzed by using both the classic Matta criteria and our modified Matta criteria. Then, the accuracy and consistency of both criteria to evaluate postoperative hip function was investigated.ResultsThe average anterior inclined angle: male (97.11° ± 2.59°), female (90.63° ± 2.09°); middle inclined angle: male (105.57° ± 1.93°), female (100.64° ± 2.46°); and posterior inclined angle: male (112.62° ± 2.54), female (106.37° ± 2.53°). Whether in males or in females, the anterior, middle, and posterior inclined angles showed a progressively increasing trend. All the three inclined angles in males were all significantly larger than those in females (p < 0.05). Among 125 cases with quadrilateral plate fractures, 101 cases (80.8%) were graded as excellent, 18 cases (14.4%) as good, and 6 cases (4.8%) as poor according to the classic Matta criteria. While based on modified Matta criteria, there were excellent in 37 cases (29.6%), good in 76 cases (60.8%), and poor in 12 cases (9.6%). According to the Harris hip score system, the functional outcomes were excellent in 59 cases (47.2%), good in 26 cases (20.8%), fair in 24 cases (19.2%), and poor in 16 cases (12.8%). Our results showed that among the cases evaluated as excellent according to the classic Matta criteria and modified Matta criteria, the excellent-to-good rates of hip function were 70.3% and 78.4%, respectively. And among the cases evaluated as poor according to the modified Matta criteria, the fair-to-poor rate of hip function was 75%, while this value was 50% for classic Matta criteria. Both differences were statistically significant (p < 0.05).ConclusionInclined angles of the quadrilateral plate could be used to assess the quality of fracture reduction and provide a basis for evaluating the rotational displacement of fracture blocks in the quadrilateral plate, which compensates the shortage of classic Matta criteria.

A new method for evaluating lung volume: AI-3D reconstruction.

Objective: This study aims to explore the clinical application of an AI-3D reconstruction system in measuring lung volume and analyze its practical value in donor-recipient size matching in lung transplantation. Methods: The study retrospectively collected data from 75 subjects who underwent a plethysmography examination and lung CT at the First Hospital of Jilin University. General data and information related to lung function, and imaging results were collected. The correlation between actual total lung volume (aTLV), predicted total lung volume (pTLV), and artificial intelligence three-dimensional reconstruction CT lung volume (AI-3DCTVol) was analyzed for the overall, male, and female groups. The correlation coefficient and the absolute error percentage with pTLV and AI-3DCTVol were obtained. Results: In the overall, male, and female groups, there were statistical differences (p <0.05) between the pTLV formula and AI-3D reconstruction compared to the plethysmography examination value. The ICC between pTLV and aTLV for all study participants was 0.788 (95% CI: 0.515-0.893), p <0.001. Additionally, the ICC value between AI-3D reconstruction and aTLV was 0.792 (95% CI: 0.681-0.866), p <0.001. For male study participants, the ICC between pTLV and aTLV was 0.330 (95% CI: 0.032-0.617), p = 0.006. Similarly, the ICC value between AI-3D reconstruction and aTLV was 0.413 (95% CI: 0.089-0.662), p = 0.007. In the case of female research subjects, the ICC between pTLV and aTLV was 0.279 (95% CI: 0.001-0.523), p = 0.012. Further, the ICC value between AI-3D reconstruction and aTLV was 0.615 (95% CI: 0.561-0.870), p <0.001. Conclusion: The AI-3D reconstruction, as a convenient method, has significant potential for application in lung transplantation.

Application of image overlapping in percutaneous nephrolithotomy.

To investigate the application of ultrasound and CT image overlap in percutaneous nephrolithotomy (PCNL). A total of 140 patients with complicated kidney stones requiring PCNL were prospectively enrolled, from January 2020 to December 2022. These patients were randomly divided into 2 groups, with 70 patients each in the research group and the control group. All participants underwent dual-source, non-contrast CT scan of both kidneys and pelvis before surgery. Preoperative three-dimensional CT reconstruction and simulated puncture were performed in patients from the research group. The best puncture path was determined through ultrasound and CT image overlap. Puncture guided by regular CT and ultrasound was conducted in patients from the control group. Differences in the surgical outcomes between the two groups were compared. Compared to the control group, the research group had higher stone clearance rate in stage I PCNL, success rate of one-time puncture, less percutaneous channels, less reduction of hemoglobin and shorter procedure time. Complications in stage I PCNL were comparable in the two groups, and there was no significant change in the final stone clearance rates between the two groups. An optimal puncture channel can be chosen using ultrasound and CT image overlap. PCNL can be achieved with precise puncturing, thus achieving coincidence between imaging and anatomy and reducing the amount of blood loss during stage I of PCNL. It also shortens the procedure time and improves stone clearance rate of PCNL.

Percutaneous fixation of scaphoid fractures through the snuffbox: an anatomical study.

The aim of the present anatomical study was to assess the dorso-radial approach for percutaneous fixation of scaphoid wist fractures. Through the anatomical snuffbox, cannulated screws or 1.2 mm K-wires were inserted into the scaphoids of 20 fresh-frozen cadavers. No tendon injuries were observed. There were two lesions of the radial artery, and three lesions of the sensory branches of the radial nerve. After dissection and three-dimensional CT reconstruction, the K-wire or screw position was described in relation to the scaphoid centroid and its longitudinal axis. The mean distance between the device and the scaphoid centroid was 2.8 mm (SD 1.4, range 0.6 to 6.1). The mean angle between the device and the scaphoid's longitudinal axis was 29° (SD 11, range 6.5 to 54). Rather than percutaneous fixation, an open approach with a modest incision might be safer for identifying and protecting both the radial artery and the sensory nerves. This approach would make perpendicular fixation possible for specific patterns of scaphoid fracture orientated approximately 60° from the longitudinal axis.

Effectiveness of anterior cruciate ligament reconstruction with personalized femoral locator based on apex of deep cartilage

To investigate the effectiveness of anterior cruciate ligament (ACL) reconstruction assisted by personalized femoral locator based on the apex of deep cartilage (ADC) combined with patient imaging data. Between January 2021 and January 2022, a total of 40 patients with primary ACL rupture were selected and randomly divided into study group (ACL reconstruction assisted by personalized femoral locator based on ADC) and control group (ACL reconstruction assisted by intraoperative fluoroscopy and traditional femoral locator), with 20 cases in each group. There was no significant difference in gender, age, body mass index, affected side, cause of injury, and preoperative International Knee Documentation Committee (IKDC) score, Lyshlom score, and Tegner score between the two groups ( P>0.05). IKDC score, Lyshlom score, and Tegner score were used to evaluate the functional recovery of the affected knee before operation and at 3, 6, and 12 months after operation. CT scan and three-dimensional reconstruction were performed before and after operation to measure the horizontal distance from ADC to the anterior cartilage margin (L) and the horizontal distance from ADC to the center of the femoral canal (I), and the anteroposterior position of the bone canal (R) was calculated by I/L; the distance from the center to the distal cartilage margin (D) was measured on the two-dimensional cross section; the R value and D value were compared between the two groups. The operation time of the study group was significantly less than that of the control group [ MD=-6.90 (-8.78, -5.03), P<0.001]. The incisions of the two groups healed by first intention, and no complication such as intra-articular infection, nerve injury, and deep vein thrombosis of lower limbs occurred. There was no significant difference in the R value and D value between the preoperative simulated positioning and the actual intraoperative positioning in the study group [ MD=0.52 (-2.85, 3.88), P=0.758; MD=0.36 (-0.39, 1.11), P=0.351]. There was no significant difference in the actual intraoperative positioning R value and D value between the study group and the control group [ MD=1.01 (-2.57, 4.58), P=0.573; MD=0.24 (-0.34, 0.82), P=0.411]. The patients in both groups were followed up 12-13 months (mean, 12.4 months). The IKDC score, Lysholm score, and Tegner score of the two groups increased gradually with time, and there were significant differences between pre- and post-operation ( P<0.05). There was no significant difference in the scores between the two groups at each time point after operation ( P>0.05). The personalized femoral locator based on ADC can accurately assist the femoral tunnel positioning in ACL reconstruction, which can shorten the operation time when compared with traditional surgical methods, and achieve satisfactory early effectiveness.

Application of Surgery-First Approach in Treating Skeletal Dentofacial Asymmetry with Orthognathic Surgery.

Skeletal dentofacial asymmetry decreases patient's attractiveness by deteriorating symmetry of facial appearance which is of great significance to individuals. Surgery-first orthognathic approach manifests its advantages of shortening treatment time and improving patient's quality of life. However, current literature on surgery-first approach mainly focuses on treating prognathism, overlooking its efficacy in improving facial symmetry of skeletal dentofacial asymmetry patients. This study aimed to assess SFA's efficacy in improving facial appearance by analyzing morphological features of asymmetric bone and facial soft tissue in a three-dimensional manner. Thirty-four patients who received orthognathic surgery in a surgery-first fashion were included. Based on three-dimensional CT reconstruction, bilateral preoperative morphological features and postoperative symmetry of hard tissue were compared respectively. Efficacy of facial soft tissue symmetry restoration was evaluated using root mean square deviation (RMSD). Asymmetric features mainly located in menton, mandibular body length, angulation between ramus and midsagittal plane (MSP), distance between gonion and MSP and so on, which were significantly restored after the whole treatment. RMSD of facial soft tissue surface were significantly declined after the treatment and prognathism was corrected simultaneously if existed. Surgery-first orthognathic approach is proved to be capable of treating skeletal dentofacial asymmetry effectively and efficiently.

The effect of integrity of lesser tuberosity-medial calcar on postoperative outcome in the proximal humeral fracture

BackgroundIn proximal humeral fractures, the medial calcar is often considered an important stabilizing structure. When the medial calcar is disrupted, some patients may have accompanying humeral lesser tuberosity comminution that has not been noticed. To investigate the impacts of comminuted fragments of lesser tuberosity and calcar on postoperative stability, CT results, number of fragments, cortical integrity, and the variation of neck-shaft angle were compared in patients with proximal humeral fractures.Materials and methodsFrom April 2016 to April 2021, this study included patients with senile proximal humeral fractures diagnosed by CT three-dimensional reconstruction with lesser tuberosity fractures and medial column injuries. The number of fragments in the lesser tuberosity and the continuity of medial calcar were evaluated. Postoperative stability and shoulder function were evaluated by comparing changes in neck-shaft angle and the DASH upper extremity function score from 1 week to 1 year after the operation.ResultsA total of 131 patients were included in the study, and the results showed that the number of fragments of the lesser tuberosity was related to the integrity of the medial cortex of the humerus. That is, when there were more than two lesser tuberosity fragments, the integrity of humeral medial calcar was poor. The positive rate of the lift-off test was higher in patients with lesser tuberosity comminutions 1 year after surgery. In addition, patients with more than two lesser tuberosity fragments and continuous destruction of the medial calcar had large variations in the neck-shaft angle, high DASH scores, poor postoperative stability, and poor recovery of shoulder joint function 1 year postoperatively.ConclusionThe number of humeral lesser tuberosity fragments and the integrity of the medial calcar were associated with the collapse of the humeral head and the decrease in shoulder joint stability after the proximal humeral fracture surgery. When the number of lesser tuberosity fragments was greater than two and the medial calcar was damaged, the proximal humeral fracture had poor postoperative stability and poor functional recovery of the shoulder joint, which required auxiliary internal fixation treatment.

Three-dimensional CT reconstruction for visualization of esophageal varices after injection with combined cyanoacrylate and Lipiodol (with video)

Three-dimensional CT reconstruction for visualization of esophageal varices after injection with combined cyanoacrylate and Lipiodol (with video)

Measurement of fracture development evolution of coal samples under acid-alkaline by three-dimensional reconstruction and AE time-frequency characteristic analysis

One of the key factors affecting the stability of coal pillar dam at the boundary of underground reservoir is pH value of mining water resources. So, the comprehensive characterization of micro-pore structure and fracture evolution characteristics of coal pillar dam samples with different pH values were studied and measued in the thesis. Combined with XRD results, the clay minerals are mainly kaolinite. Based on three-dimensional CT reconstruction, the development degree of coal pore fractures were: strong acid > strong alkali > neutral mine water > natural drying, the longer the roar tends to develop in lower section with high H+ concentration. Based on AE Fourier transform, the higher the H+ concentration, the higher the development degree of macro-large fractures; the higher the OH– concentration, the higher the development degree of small-sized fractures. However, the higher the H+ concentration, the higher the macro-orderliness of the crack system.

Anatomical observation and CT three-dimensional reconstruction of Five-shu acupoints of Shaoyin Heart Meridian in rabbit's forelimb

To investigate the location and anatomical structure of "Shaochong"(HT9), "Shaofu"(HT8), "Shenmen"(HT7), "Lingdao"(HT4) and "Shaohai"(HT3) in the rabbit's forelimb. Sixteen rabbits (half male and half female) were used in the present study. By referring to the national standards on the location of acupoints in the human body and the literature about the location of acupoints in the rabbit, and by using the method of comparative anatomy, the location and needling operation of the Five-shu acupoints of Shaoyin Heart Meridian on the rabbit's forelimb were defined, and these acupoints were needled and CT three-dimensional reconstruction were conducted. Then, the rabbits were killed, and intravascular perfusion was performed, followed by inserting acupuncture needles into these five acupoints for observing the anatomical relationship between the inserted acupuncture needle and the structure of surrounding tissues. HT9 is located at the medial side of the little finger of forelimb, about 1 mm beside the nail root, and is adjacent to the superficial flexor tendon of the finger, the dorsal branches of the proper palmar digital artery and vein, and the endings of dorsal branch of palmar digital proper nerve of the ulnar nerve on the fifth finger side. HT8 is located at the palm side of the forelimb, horizontally parallel to the proximal end of the 5th metacarpophalangeal joint and between the 4th and 5th metacarpal bones, and is adjacent to the lumbricalis, the 4th and 5th interossei, and common palmar digital artery and vein and the palmar digital proper nerve of the ulnar nerve. HT7 is located at the medial margin of the extensor carpal tendon on the ulnar side, between the distal end of the ulna and the ulnar carpal bone, and is adjacent to the tendons of flexor carpi ulnaris and extensor carpi ulnaris, ulnar artery, ulnar vein and ulnar nerve. HT4 is located at the medial border of the ulnar flexor tendon, about 1.5 cun superior to HT7, and is adjacent to extensor carpi ulnaris, flexor carpi ulnaris, flexor digitorum superficialis, flexor digitorum profundus, ulnar artery, vein and ulnar nerve. HT3 is located at the depression, medial to the condyle of humerus when the elbow is bent at 90°, its neighbor structure is composed of pronator teres, biceps brachii, brachial artery and vein, radial collateral artery, radial collateral vein, medial antebrachial cutaneous nerve and median nerve. In the rabbit, there is a close relationship between HT9, HT8, HT7, HT4 and HT3 regions and brachial vascular and its branches, cephalic vein and its branches, medial antebrachial cutaneous nerve, median nerve and ulnar nerve, which is the morphological basis of the Five-shu acupoints of Shaoyin Heart Meridian for treating some related clinical disorders.