CT Texture Analysis Research Articles

The Effectiveness of Computed Tomography Texture Analysis in Distinguishing Wilms Tumor from Neuroblastoma

The Effectiveness of Computed Tomography Texture Analysis in Distinguishing Wilms Tumor from Neuroblastoma

Could CT Radiomic Analysis of Benign Adrenal Incidentalomas Suggest the Need for Further Endocrinological Evaluation?

We studied the application of CT texture analysis in adrenal incidentalomas with baseline characteristics of benignity that are highly suggestive of adenoma to find whether there is a correlation between the extracted features and clinical data. Patients with hormonal hypersecretion may require medical attention, even if it does not cause any symptoms. A total of 206 patients affected by adrenal incidentaloma were retrospectively enrolled and divided into non-functioning adrenal adenomas (NFAIs, n = 115) and mild autonomous cortisol secretion (MACS, n = 91). A total of 136 texture parameters were extracted in the unenhanced phase for each volume of interest (VOI). Random Forest was used in the training and validation cohorts to test the accuracy of CT textural features and cortisol-related comorbidities in identifying MACS patients. Twelve parameters were retained in the Random Forest radiomic model, and in the validation cohort, a high specificity (81%) and positive predictive value (74%) were achieved. Notably, if the clinical data were added to the model, the results did not differ. Radiomic analysis of adrenal incidentalomas, in unenhanced CT scans, could screen with a good specificity those patients who will need a further endocrinological evaluation for mild autonomous cortisol secretion, regardless of the clinical information about the cortisol-related comorbidities.

Enhanced Diagnostic Precision: Assessing Tumor Differentiation in Head and Neck Squamous Cell Carcinoma Using Multi-Slice Spiral CT Texture Analysis.

This study explores the efficacy of texture analysis by using preoperative multi-slice spiral computed tomography (MSCT) to non-invasively determine the grade of cellular differentiation in head and neck squamous cell carcinoma (HNSCC). In a retrospective study, MSCT scans of patients with HNSCC were analyzed and classified based on its histological grade as moderately differentiated, well-differentiated, or poorly differentiated. The location of the tumor was categorized as either in the bone or in soft tissues. Segmentation of the lesion areas was conducted, followed by texture analysis. Eleven GLCM parameters across five different distances were calculated. Median values and correlations of texture parameters were examined in relation to tumor differentiation grade by using Spearman's correlation coefficient and Kruskal-Wallis and Dunn tests. Forty-six patients were included, predominantly female (87%), with a mean age of 66.7 years. Texture analysis revealed significant parameter correlations with histopathological grades of tumor differentiation. The study identified no significant age correlation with tumor differentiation, which underscores the potential of texture analysis as an age-independent biomarker. The strong correlations between texture parameters and histopathological grades support the integration of this technique into the clinical decision-making process.

Impact of quantitative CT texture analysis on the outcome of CT-guided bone biopsy

Texture analysis can provide new imaging-based biomarkers. Texture analysis derived from computed tomography (CT) might be able to better characterize patients undergoing CT-guided percutaneous bone biopsy. The present study evaluated this and correlated texture features with bioptic outcome in patients undergoing CT-guided bone biopsy. Overall, 123 patients (89 female patients, 72.4 %) were included into the present study. All patients underwent CT-guided percutaneous bone biopsy with an 11 Gauge coaxial needle. Clinical parameters and quantitative imaging features were investigated. Random forest classifier was used to predict a positive biopsy result. Overall, 69 patients had osteolytic metastasis (56.1 %) and 54 had osteoblastic metastasis (43.9 %). The overall positive biopsy rate was 72 %. The developed radiomics model demonstrated a prediction accuracy of a positive biopsy result with an AUC of 0.75 [95 %CI 0.65 – 0.85]. In a subgroup of breast cancer patients, the model achieved an AUC of 0.85 [95 %CI 0.73 – 0.96]. In the subgroup of non-breast cancer patients, the signature achieved an AUC of 0.80 [95 %CI 0.60 – 0.99]. Quantitative CT imaging findings comprised of conventional and texture features can aid to predict the bioptic result of CT-guided bone biopsies. The developed radiomics signature aids in clinical decision-making, and could identify patients at risk for a negative biopsy.

Clinical Variables and Radiomics Features for Predicting Pneumothorax in Patients Undergoing CT-guided Transthoracic Core Needle Biopsy.

Purpose To develop a prediction model combining both clinical and CT texture analysis radiomics features for predicting pneumothorax complications in patients undergoing CT-guided core needle biopsy. Materials and Methods A total of 424 patients (mean age, 65.6 years ± 12.7 [SD]; 232 male, 192 female) who underwent CT-guided core needle biopsy between January 2021 and October 2022 were retrospectively included as the training data set. Clinical and procedure-related characteristics were documented. Texture analysis radiomics features were extracted from the subpleural lung parenchyma traversed by needle. Moderate pneumothorax was defined as a postprocedure air rim of 2 cm or greater. The prediction model was developed using logistic regression with backward elimination, presented by linear fusion of the selected features weighted by their coefficients. Model performance was assessed using the area under the receiver operating characteristic curve (AUC). Validation was conducted in an external cohort (n = 45; mean age, 58.2 years ± 12.7; 19 male, 26 female) from a different hospital. Results Moderate pneumothorax occurred in 12.0% (51 of 424) of the training cohort and 8.9% (four of 45) of the external test cohort. Patients with emphysema (P < .001) or a longer needle path length (P = .01) exhibited a higher incidence of moderate pneumothorax in the training cohort. Texture analysis features, including gray-level co-occurrence matrix cluster shade (P < .001), gray-level run-length matrix low gray-level run emphasis (P = .049), gray-level run-length matrix run entropy (P = .003), gray-level size-zone matrix gray-level variance (P < .001), and neighboring gray-tone difference matrix complexity (P < .001), showed higher values in patients with moderate pneumothorax. The combined clinical-radiomics model demonstrated satisfactory performance in both the training (AUC 0.78, accuracy = 71.9%) and external test cohorts (AUC 0.86, accuracy 73.3%). Conclusion The model integrating both clinical and radiomics features offered practical diagnostic performance and accuracy for predicting moderate pneumothorax in patients undergoing CT-guided core needle biopsy. Keywords: Biopsy/Needle Aspiration, Thorax, CT, Pneumothorax, Core Needle Biopsy, Texture Analysis, Radiomics, CT Supplemental material is available for this article. © RSNA, 2024.

CT texture analysis of vertebrobasilar artery calcification to identify culprit plaques.

The aim of this study was to extract radiomic features from vertebrobasilar artery calcification (VBAC) on head computed tomography (CT) images and investigate its diagnostic performance to identify culprit lesions responsible for acute cerebral infarctions. Patients with intracranial atherosclerotic disease who underwent vessel wall MRI (VW-MRI) and head CT examinations from a single center were retrospectively assessed for VBAC visual and textural analyses. Each calcified plaque was classified by the likelihood of having caused an acute cerebral infarction identified on VW-MRI as culprit or non-culprit. A predefined set of texture features extracted from VBAC segmentation was assessed using the minimum redundancy and maximum relevance method. Five key features were selected to integrate as a radiomic model using logistic regression by the Aikaike Information Criteria. The diagnostic value of the radiomic model was calculated for discriminating culprit lesions over VBAC visual assessments. A total of 1,218 radiomic features were extracted from 39 culprit and 50 non-culprit plaques, respectively. In the VBAC visual assessment, culprit plaques demonstrated more observed presence of multiple calcifications, spotty calcification, and intimal predominant calcification than non-culprit lesions (all p < 0.05). In the VBAC texture analysis, 55 (4.5%) of all extracted features were significantly different between culprit and non-culprit plaques (all p < 0.05). The radiomic model incorporating 5 selected features outperformed multiple calcifications [AUC = 0.81 with 95% confidence interval (CI) of 0.72, 0.90 vs. AUC = 0.61 with 95% CI of 0.49, 0.73; p = 0.001], intimal predominant calcification (AUC = 0.67 with 95% CI of 0.58, 0.76; p = 0.04) and spotty calcification (AUC = 0.62 with 95% CI of 0.52, 0.72; p = 0.005) in the identification of culprit lesions. Culprit plaques in the vertebrobasilar artery exhibit distinct calcification radiomic features compared to non-culprit plaques. CT texture analysis of VBAC has potential value in identifying lesions responsible for acute cerebral infarctions, which may be helpful for stroke risk stratification in clinical practice.

Quantitative CT Texture Analysis of COVID-19 Hospitalized Patients during 3-24-Month Follow-Up and Correlation with Functional Parameters.

To quantitatively evaluate CT lung abnormalities in COVID-19 survivors from the acute phase to 24-month follow-up. Quantitative CT features as predictors of abnormalities' persistence were investigated. Patients who survived COVID-19 were retrospectively enrolled and underwent a chest CT at baseline (T0) and 3 months (T3) after discharge, with pulmonary function tests (PFTs). Patients with residual CT abnormalities repeated the CT at 12 (T12) and 24 (T24) months after discharge. A machine-learning-based software, CALIPER, calculated the CT percentage of the whole lung of normal parenchyma, ground glass (GG), reticulation (Ret), and vascular-related structures (VRSs). Differences (Δ) were calculated between time points. Receiver operating characteristic (ROC) curve analyses were performed to test the baseline parameters as predictors of functional impairment at T3 and of the persistence of CT abnormalities at T12. The cohort included 128 patients at T0, 133 at T3, 61 at T12, and 34 at T24. The GG medians were 8.44%, 0.14%, 0.13% and 0.12% at T0, T3, T12 and T24. The Ret medians were 2.79% at T0 and 0.14% at the following time points. All Δ significantly differed from 0, except between T12 and T24. The GG and VRSs at T0 achieved AUCs of 0.73 as predictors of functional impairment, and area under the curves (AUCs) of 0.71 and 0.72 for the persistence of CT abnormalities at T12. CALIPER accurately quantified the CT changes up to the 24-month follow-up. Resolution mostly occurred at T3, and Ret persisting at T12 was almost unchanged at T24. The baseline parameters were good predictors of functional impairment at T3 and of abnormalities' persistence at T12.

Discordance between dual-energy X-ray absorptiometry bone mineral density and spinal computed tomography texture analysis: An investigation into low correlation rates

ObjectivesThis research delves into the application of texture analysis in spine computed tomography (CT) scans and its correlation with bone mineral density (BMD), as determined by dual-energy X-ray absorptiometry (DXA). It specifically addresses the discordance between the 2 measurements, suggesting that certain spinal-specific factors may contribute to this discrepancy. MethodsThe study involved 405 cases from a single institution collected between May 6, 2012 and June 30, 2021. Each case underwent a spinal CT scan and a DXA scan. BMD values at the lumbar region (T12 to S1) and total hip were recorded. Texture features from axial cuts of T12 to S1 vertebrae were extracted using gray-level co-occurrence matrices, and a regression model was constructed to predict the BMD values. ResultsThe correlation between CT texture analysis results and BMD from DXA was moderate, with a correlation coefficient ranging between 0.4 and 0.5. This discordance was examined in light of factors unique to the spine region, such as abdominal obesity, aortic calcification, and lumbar degenerative changes, which could potentially affect BMD measurements. ConclusionsEmerging from this study is a novel insight into the discordance between spinal CT texture analysis and DXA-derived BMD measurements, highlighting the unique influence of spinal attributes. This revelation calls into question the exclusive reliance on DXA scans for BMD assessment, particularly in scenarios where DXA scanning may not be feasible or accurate.

The value of computed tomography texture analysis in identifying chronic subdural hematoma patients with a good response to polytherapy

This study aimed to investigate the predictive factors of therapeutic efficacy for chronic subdural hematoma (CSDH) patients receiving atorvastatin combined with dexamethasone therapy by using clinical imaging characteristics in conjunction with computed tomography (CT) texture analysis (CTTA). Clinical imaging characteristics and CT texture parameters at admission were retrospectively investigated in 141 CSDH patients who received atorvastatin combined with dexamethasone therapy from June 2019 to December 2022. The patients were divided into a training set (n = 81) and a validation set (n = 60). Patients in the training data were divided into two groups based on the effectiveness of the treatment. Univariate and multivariate analyses were performed to assess the potential factors that could indicate the prognosis of CSDH patients in the training set. The receiver operating characteristic (ROC) curve was used to analyze the predictive efficacy of the significant factors in predicting the prognosis of CSDH patients and was validated using a validation set. The multivariate analysis showed that the hematoma density to brain parenchyma density ratio, singal min (minimum) and singal standard deviation of the pixel distribution histogram, and inhomogeneity were independent predictors for the prognosis of CSDH patients based on atorvastatin and dexamethasone therapy. The area under the ROC curve between the two groups was between 0.716 and 0.806. As determined by significant factors, the validation's accuracy range was 0.816 to 0.952. Clinical imaging characteristics in conjunction with CTTA could aid in distinguishing patients with CSDH who responded well to atorvastatin combined with dexamethasone.

Penalized deep partially linear cox models with application to CT scans of lung cancer patients.

Lung cancer is a leading cause of cancer mortality globally, highlighting the importance of understanding its mortality risks to design effective patient-centered therapies. The National Lung Screening Trial (NLST) employed computed tomography texture analysis, which provides objective measurements of texture patterns on CT scans, to quantify the mortality risks of lung cancer patients. Partially linear Cox models have gained popularity for survival analysis by dissecting the hazard function into parametric and nonparametric components, allowing for the effective incorporation of both well-established risk factors (such as age and clinical variables) and emerging risk factors (eg, image features) within a unified framework. However, when the dimension of parametric components exceeds the sample size, the task of model fitting becomes formidable, while nonparametric modeling grapples with the curse of dimensionality. We propose a novel Penalized Deep Partially Linear Cox Model (Penalized DPLC), which incorporates the smoothly clipped absolute deviation (SCAD) penalty to select important texture features and employs a deep neural network to estimate the nonparametric component of the model. We prove the convergence and asymptotic properties of the estimator and compare it to other methods through extensive simulation studies, evaluating its performance in risk prediction and feature selection. The proposed method is applied to the NLST study dataset to uncover the effects of key clinical and imaging risk factors on patients' survival. Our findings provide valuable insights into the relationship between these factors and survival outcomes.

Machine learning-based CT texture analysis in the differentiation of testicular masses.

To evaluate the ability of texture features for distinguishing between benign and malignant testicular masses, and furthermore, for identifying primary testicular lymphoma in malignant tumors and identifying seminoma in testicular germ cell tumors, respectively. We retrospectively collected 77 patients with an abdominal and pelvic enhanced computed tomography (CT) examination and a histopathologically confirmed testicular mass from a single center. The ROI of each mass was split into two parts by the largest cross-sectional slice and deemed to be two samples. After all processing steps, three-dimensional texture features were extracted from unenhanced and contrast-enhanced CT images. Excellent reproducibility of texture features was defined as intra-class correlation coefficient ≥0.8 (ICC ≥0.8). All the groups were balanced via the synthetic minority over-sampling technique (SMOTE) method. Dimension reduction was based on pearson correlation coefficient (PCC). Before model building, minimum-redundancy maximum-relevance (mRMR) selection and recursive feature elimination (RFE) were used for further feature selection. At last, three ML classifiers with the highest cross validation with 5-fold were selected: autoencoder (AE), support vector machine(SVM), linear discriminant analysis (LAD). Logistics regression (LR) and LR-LASSO were also constructed to compare with the ML classifiers. 985 texture features with ICC ≥0.8 were extracted for further feature selection process. With the highest AUC of 0.946 (P <0.01), logistics regression was proved to be the best model for the identification of benign or malignant testicular masses. Besides, LR also had the best performance in identifying primary testicular lymphoma in malignant testicular tumors and in identifying seminoma in testicular germ cell tumors, with the AUC of 0.982 (P <0.01) and 0.928 (P <0.01), respectively. Until now, this is the first study that applied CT texture analysis (CTTA) to assess the heterogeneity of testicular tumors. LR model based on CTTA might be a promising non-invasive tool for the diagnosis and differentiation of testicular masses. The accurate diagnosis of testicular masses would assist urologists in correct preoperative and perioperative decision making.

Lymph Node Staging by CT Texture Analysis in Patients with Sigmoid Cancer

Lymph Node Staging by CT Texture Analysis in Patients with Sigmoid Cancer

Prediction of Fuhrman pathological grade of renal clear cell carcinoma based on CT texture analysis

Prediction of Fuhrman pathological grade of renal clear cell carcinoma based on CT texture analysis

Impact of CT texture analysis on complication rate in CT-guided liver biopsies.

Texture analysis derived from computed tomography (CT) involves quantitative imaging parameters characterizing possible valuable associations with clinical purposes. Their prognostic capability in patients undergoing percutaneous CT-guided liver biopsy to identify associations with postinterventional bleeding complications and biopsy success is not sufficiently explored. Three hundred fifteen patients (124 female, 39%) with a mean age of 62.5 ±10.2 years underwent percutaneous CT-guided liver biopsy and were analyzed regarding clinical, procedure-related, and CT texture features. Thirty patients (9.5%) presented with bleeding after biopsy (including two requiring interventional treatment), whereas 46 patients (14.6%) had negative biopsy successes. Distance of lesion from liver capsule was statistically significantly different in patients with and without bleeding (p = 0.015). Several texture features were statistically significantly different between the groups, S(0,1)SumAverg having the highest significance (p = 0.004). Regarding unsuccessful biopsy results, liver fibrosis was the only clinical feature with statistical significance (p = 0.049). Only two texture features (S(4,-4)InvDfMom and Teta3) were statistically different between the groups according to the biopsy result. Several CT texture features of the target lesion and the length from the capsule to the lesion were associated with bleeding complications after CT-guided percutaneous liver biopsy. This could be used to identify patients at risk at the beginning of the procedure.

Tumor Heterogeneity of Breast Cancer Assessed with Computed Tomography Texture Analysis: Association with Disease-Free Survival and Clinicopathological Prognostic Factor

Breast cancer is a heterogeneous disease, and computed tomography texture analysis (CTTA), which reflects the tumor heterogeneity, may predict the prognosis. We investigated the usefulness of CTTA for the prediction of disease-free survival (DFS) and prognostic factors in patients with invasive breast cancer. A total of 256 consecutive women who underwent preoperative chest CT and surgery in our institution were included. The Cox proportional hazards model was used to determine the relationship between textural features and DFS. Logistic regression analysis was used to reveal the relationship between textural features and prognostic factors. Of 256 patients, 21 (8.2%) had disease recurrence over a median follow-up of 60 months. For the prediction of shorter DFS, higher histological grade (hazard ratio [HR], 6.12; p &lt; 0.001) and lymphovascular invasion (HR, 2.93; p = 0.029) showed significance, as well as textural features such as lower mean attenuation (HR, 4.71; p = 0.003) and higher entropy (HR, 2.77; p = 0.036). Lower mean attenuation showed a correlation with higher tumor size, and higher entropy showed correlations with higher tumor size and Ki-67. In conclusion, CTTA-derived textural features can be used as a noninvasive imaging biomarker to predict shorter DFS and prognostic factors in patients with invasive breast cancer.

CT texture analysis for differentiating between peritoneal carcinomatosis and peritoneal tuberculosis: a cross-sectional study.

Peritoneal carcinomatosis (PC) and peritoneal tuberculosis (PTB) have similar clinical and radiologic imaging features, which make it very difficult to differentiate between the two entities clinically. Our aim was to determine if the CT textural parameters of omental lesions among patients with PC were different from those with PTB. All patients who had undergone omental biopsy at our institution from January 2010 to December 2018 and had a tissue diagnosis of PC or PTB were eligible for inclusion. Patients who did not have a contrast-enhanced CT abdomen within one month of the omental biopsy were excluded. A region of interest (ROI) was manually drawn over omental lesions and radiomic features were extracted using open-source LIFEx software. Statistical analysis was performed to compare mean differences in CT texture parameters between the PC and PTB groups. A total of 66 patients were included in the study of which 38 and 28 had PC and PTB, respectively. Omental lesions in patients with PC had higher mean radiodensity (mean difference: +32.4; p=0.001), higher mean entropy (mean difference: +0.11; p<0.001), and lower mean energy (mean difference: -0.024; p=0.001) compared to those in PTB. Additionally, omental lesions in the PC group had lower gray-level co-occurrence matrix (GLCM) homogeneity (mean difference: -0.073; p<0.001) and higher GLCM dissimilarity (mean difference: +0.480; p<0.001) as compared to the PTB group. CT texture parameters of omental lesions differed significantly between patients with PTB and those with PC, which may help clinicians in differentiating between the two entities.

Elucidating the Correlation between Bone Mineral Density and Multifidus Muscle Characteristics: A Cross-Modal Study with Dual-Energy X-ray Absorptiometry and Spinal Computed Tomography Texture Analysis.

Recent research underscores the clinical relevance of muscle conditions such as sarcopenia and their links to bone mineral density (BMD), yet notable gaps persist in the understanding of their interconnections. Our study addresses this by introducing a novel approach to decipher the correlation between BMD and the texture of the multifidus muscle, utilizing spinal computed tomography (CT) and dual-energy X-ray absorptiometry (DXA) to evaluate muscle texture, BMD, and bone mineral content (BMC) at the total lumbar vertebra and total hip. Our single-institution study examined 395 cases collected from 6 May 2012 to 30 November 2021. Each patient underwent a spinal CT scan and a DXA scan within a one-month interval. BMD and BMC at the total lumbar vertebra and total hip were measured. The texture features of the multifidus muscle from the axial cuts of T12 to S1 vertebrae were assessed via gray-level co-occurrence matrices. CT texture analysis values at angles of 45 + 45 and 90 degrees were calculated and correlated with BMD and BMC. A regression model was then constructed to predict BMD values, and the precision of these correlations was evaluated using mean square error (MSE) analysis. Total lumbar BMC showed a correlation of 0.583-0.721 (MSE 1.568-1.842) and lumbar BMD of 0.632-0.756 (MSE 0.068-0.097). Total hip BMC had a correlation of 0.556-0.690 (MSE 0.448-0.495), while hip BMD ranged from 0.585 to 0.746 (MSE 0.072-0.092). The analysis of spinal CT texture alongside BMD and BMC measures provides a new approach to understanding the relationship between bone and muscle health. The strong correlations expected from our research affirm the importance of integrating bone and muscle measures in the prevention, diagnosis, and management of conditions such as sarcopenia and osteoporosis.

Development and validation of a nomogram based on CT texture analysis for discriminating minimally invasive adenocarcinoma from glandular precursor lesions in sub‑centimeter pulmonary ground glass nodules

Development and validation of a nomogram based on CT texture analysis for discriminating minimally invasive adenocarcinoma from glandular precursor lesions in sub‑centimeter pulmonary ground glass nodules

Computed tomography texture analysis to discriminate fungal and non-fungal infected fluid collections

Computed tomography texture analysis to discriminate fungal and non-fungal infected fluid collections

Assessing bone mineral density in non-weight bearing regions of the body: a texture analysis approach using abdomen and pelvis computed tomography Hounsfield units-a cross-sectional study.

Highlighting a gap in comprehending bone microarchitecture's intricacies using dual-energy X-ray absorptiometry (DXA), this study aims to bridge this chasm by analyzing texture in non-weight bearing regions on axial computed tomography (CT) scans. Our goal is to enrich osteoporosis patient management by enhancing bone quality and microarchitecture insights. Conducted at Busan Medical Center from March 1, 2013, to August 30, 2022, 1,320 cases (782 patients) were screened. After applying exclusion criteria, 458 samples (296 patients) underwent bone mineral density (BMD) assessment with both CT and DXA. Regions of interest (ROIs) included spine pedicle's maximum trabecular area, sacrum Zone 1, superior/inferior pubic ramus, and femur's greater/lesser trochanters. Texture features (n=45) were extracted from ROIs using gray-level co-occurrence matrices. A regression model predicted BMD, spotlighting the top five influential texture features. Correlation coefficients ranged from 0.709 (lowest for total femur BMD) to 0.804 (highest for femur intertrochanter BMD). Mean squared error (MSE) values were also provided for lumbar and femur BMD/bone mineral content (BMC) metrics. The most influential texture features included contrast_32, correlation_32_v, and three other metrics. By melding traditional DXA and CT texture analysis, our approach presents a comprehensive bone health perspective, potentially revolutionizing osteoporosis diagnostics.