Organic Semiconductor Crystals Research Articles

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors.

Electrohydrodynamic (EHD) jet printing is a widely employed technology to create high-resolution patterns and thus has enormous potential for circuit production. However, achieving both high conductivity and high resolution in printed polymer electrodes is a challenging task. Here, by modulating the aggregation state of the conducting polymer in the solution and solid phases, a stable and continuous jetting of PEDOT:PSS is realized, and high-conductivity electrode arrays are prepared. The line width reaches less than 5 μm with a record-high conductivity of 1250 S/cm. Organic field-effect transistors (OFETs) are further developed by combining printed source/drain electrodes with ultrathin organic semiconductor crystals. These OFETs show great light sensitivity, with a specific detectivity (D*) value of 2.86 × 1014 Jones. In addition, a proof-of-concept fully transparent phototransistor is demonstrated, which opens up new pathways to multidimensional optical imaging.

Design Rules to Optimize the Intermolecular and Long-Range Packing of Organic Semiconductor Crystals

Design Rules to Optimize the Intermolecular and Long-Range Packing of Organic Semiconductor Crystals

Orthogonal printing of uniform nanocomposite monolayer and oriented organic semiconductor crystals for high-performance nano-crystal floating gate memory

Inkjet printing is of great interest in the preparation of optoelectronic and microelectronic devices due to its low cost, low process temperature, versatile material compatibility, and ability to precisely manufacture multi-layer devices on demand. However, interlayer solvent erosion is a typical problem that limits the printing of organic semiconductor devices with multi-layer structures. In this study, we proposed a solution to address this erosion problem by designing polystyrene-block-poly(4-vinyl pyridine)-grafted Au nanoparticles (Au@PS-b-P4VP NPs). With a colloidal ink containing the Au@PS-b-P4VP NPs, we obtained a uniform monolayer of Au nano-crystal floating gates (NCFGs) embedded in the PS-b-P4VP tunneling dielectric (TD) layer using direct-ink-writing (DIW). Significantly, PS-b-P4VP has high erosion resistance against the semiconductor ink solvent, which enables multi-layer printing. An active layer of semiconductor crystals with high crystallinity and well-orientation was obtained by DIW. Moreover, we developed a strategy to improve the quality of the TD/semiconductor interface by introducing a polystyrene intermediate layer. We show that the NCFG memory devices exhibit a low threshold voltage (<3 V), large memory window (66 V), stable endurance (>100 cycles), and long-term retention (>10 years). This study provides universal guidance for printing functional coatings and multi-layer devices.

Novel solution-processed 2D organic semiconductor crystals for high-performance OFETs

2D organic semiconductor crystals have the advantage of ultrathin thickness, long-range ordered molecular structures, the absence of grain boundaries, and low defect and impurity densities. They are of great significance for preparing high-performance OFET devices.

Cluster-Based Approach Utilizing Optimally Tuned TD-DFT to Calculate Absorption Spectra of Organic Semiconductor Thin Films.

The photophysics of organic semiconductor (OSC) thin films or crystals has garnered significant attention in recent years since a comprehensive theoretical understanding of the various processes occurring upon photoexcitation is crucial for assessing the efficiency of OSC materials. To date, research in this area has relied on methods using Frenkel-Holstein Hamiltonians, calculations of the GW-Bethe-Salpeter equation with periodic boundaries, or cluster-based approaches using quantum chemical methods, with each of the three approaches having distinct advantages and disadvantages. In this work, we introduce an optimally tuned, range-separated time-dependent density functional theory approach to accurately reproduce the total and polarization-resolved absorption spectra of pentacene, tetracene, and perylene thin films, all representative OSC materials. Our approach achieves excellent agreement with experimental data (mostly ≤0.1 eV) when combined with the utilization of clusters comprising multiple monomers and a standard polarizable continuum model to simulate the thin-film environment. Our protocol therefore addresses a major drawback of cluster-based approaches and makes them attractive tools for OSC investigations. Its key advantages include its independence from external, system-specific fitting parameters and its straightforward application with well-known quantum chemical program codes. It demonstrates how chemical intuition can help to reduce computational cost and still arrive at chemically meaningful and almost quantitative results.

The anisotropic nature of singlet fission in single crystalline organic semiconductors

The escalating global energy predicament implores for a revolutionary resolution—one that converts sunlight into electricity—holding the key to supreme conversion efficiency. This comprehensive review embarks on the exploration of the principle of generating multiple excitons per absorbed photon, a captivating concept that possesses the potential to redefine the fundamental confines of conversion efficiency, albeit its application remains limited in photovoltaic devices. At the nucleus of this phenomenon are two principal processes: multiple exciton generation (MEG) within quantum-confined environments, and singlet fission (SF) inside molecular crystals. The process of SF, characterized by the cleavage of a single photogenerated singlet exciton into two triplet excitons, holds promise to potentially amplify photon-to-electron conversion efficiency twofold, thereby laying the groundwork to challenge the detailed balance limit of solar cell efficiency. Our discourse primarily dissects the complex nature of SF in crystalline organic semiconductors, laying special emphasis on the anisotropic behavior of SF and the diffusion of the subsequent triplet excitons in single-crystalline polyacene organic semiconductors. We initiate this journey of discovery by elucidating the principles of MEG and SF, tracing their historical genesis, and scrutinizing the anisotropy of SF and the impact of quantum decoherence within the purview of functional mode electron transfer theory. We present an overview of prominent techniques deployed in investigating anisotropic SF in organic semiconductors, including femtosecond transient absorption microscopy and imaging as well as stimulated Raman scattering microscopies, and highlight recent breakthroughs linked with the anisotropic dimensions of Davydov splitting, Herzberg–Teller effects, SF, and triplet transport operations in single-crystalline polyacenes. Through this comprehensive analysis, our objective is to interweave the fundamental principles of anisotropic SF and triplet transport with the current frontiers of scientific discovery, providing inspiration and facilitating future ventures to harness the anisotropic attributes of organic semiconductor crystals in the design of pioneering photovoltaic and photonic devices.

A New Family of Layered Metal-Organic Semiconductors: Cu/V-Organophosphonates.

Herein, wereport the design and synthesis of a layered redox-active, antiferromagnetic metal organic semiconductor crystals with the chemical formula [Cu(H2 O)2 V(µ-O)(PPA)2 ] (where PPA is phenylphosphonate). The crystal structure of [Cu(H2 O)2 V(µ-O)(PPA)2 ] shows that the metal phosphonate layers are separated by phenyl groups of the phenyl phosphonate linker. Tauc plotting of diffuse reflectance spectra indicates that [Cu(H2 O)2 V(µ-O)(PPA)2 ] has an indirect band gap of 2.19eV. Photoluminescence (PL) spectra indicate a complex landscape of energy states with PL peaks at 1.8 and 2.2eV. [Cu(H2 O)2 V(µ-O)(PPA)2 ] has estimated hybrid ionic and electronic conductivity values between 0.13 and 0.6Sm-1 . Temperature-dependent magnetization measurements show that [Cu(H2 O)2 V(µ-O)(PPA)2 ] exhibits short range antiferromagnetic order between Cu(II) and V(IV) ions. [Cu(H2 O)2 V(µ-O)(PPA)2 ] is also photoluminescent with photoluminescence quantum yield of 0.02%. [Cu(H2 O)2 V(µ-O)(PPA)2 ] shows high electrochemical, and thermal stability.

Disordered Phase-Assisted Growth of Organic Semiconductor Crystals on Self-Assembled Monolayer Templates.

Achieving high mobility and bias stability is a challenging obstacle in the advancement of organic thin-film transistors (OTFTs). To this end, the fabrication of high-quality organic semiconductor (OSC) thin films is critical for OTFTs. Self-assembled monolayers (SAMs) have been used as growth templates for high-crystalline OSC thin films. Despite significant research progress in the growth of OSC on SAMs, a detailed understanding of the growth mechanism of the OSC thin films on a SAM template is lacking, which has limited its use. In this study, the effects of the structure (thickness and molecular packing) of SAM on the nucleation and growth behavior of the OSC thin films were investigated. We found that disordered SAM molecules assisted in the surface diffusion of the OSC molecules and resulted in a small nucleation density and large grain size of the OSC thin films. Moreover, a thick SAM with disordered SAM molecules on the top was found to be beneficial for the high mobility and bias stability of the OTFTs.

Additive-Assisted Perylene Polymorphism Controlled via Secondary Bonding Interactions

The influence of molecular additives or impurities on crystal growth, morphology, and polymorphism has broad importance in various fields of material science and pharmaceutical engineering. There are numerous examples demonstrating the effect of impurities on the crystallization of pharmaceutical substances; however, systematic studies on the additives’ effect on crystallization and properties of organic semiconductors have not yet been reported. Here, we studied additive-assisted crystallization of a model aromatic hydrocarbon compound–perylene–to elaborate the crystal engineering tool for organic optoelectronics and to reveal the underlying mechanism. Anthracene, tetracene, 9,10-diphenylanthracene, and rubrene were used as representative additives. We found the optimal additive and conditions for perylene crystallization allowing us to control its polymorphic outcome. The addition of 9,10-diphenylanthracene was demonstrated to lead to a preferable crystallization of metastable β-form of perylene, whereas in the neat conditions, α-form was typically obtained as a stable one. The crystallization of perylene with 9,10-diphenylanthracene in high concentrations resulted in their stoichiometric co-crystallization. The perylene:9,10-diphenylanthracene co-crystal structure and optoelectronic properties were evaluated. The co-crystal demonstrated a photoluminescence quantum yield of 45% and hole mobility of 0.025 cm2/V s. The co-crystal structure analysis pointed on the stabilization of herringbone packing of perylene by interlayer C–H···π interactions, allowing the 9,10-diphenylanthracene layers to serve as the template for perylene β-polymorph nucleation. The results obtained could serve as the basis for crystallization control and engineering of high-performance materials in organic optoelectronics.

Twisted Crystalline Organic Semiconductor Photodetectors

AbstractOptoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, a generalizable strategy to introduce periodic variations in the out‐of‐plane orientations of 5,11‐bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band‐dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation‐dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3‐ and 6.2‐times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.

Crystallization and photophysical dynamics of Tris(8-hydroxyquinoline) aluminum crystals fabricated by micro-spacing sublimation method

The crystallization and photophysical properties of organic semiconductors have a great influence on the device performance. In this work, micro-spacing sublimation method was used to regulate the crystallization and optical properties of tris(8-hydroxyquinoline) aluminum (Alq3) molecules. It is found that when Alq3 gas molecules contact with the cold substrate, Alq3 molecules aggregate to form small nuclei, and then grow into fiber structure. Micro-spacing distance supplies enough time for Alq3 molecules to assembly into ordered structure. The fibers will further grow to large crystals with the increase of deposition time. The density of trap states is significantly reduced as the crystal size increases owing to the strong π-π molecule interactions, leading to the higher luminescence efficiency. This work will be beneficial to the preparation of organic semiconductor crystals and study of their crystallization process, thus applied to the optimization of device performance.

A General Vapor‐Induced Coating Approach for Layer‐controlled Organic Single Crystals

Abstract2D organic semiconductor crystals (2D OSCs) are vital for high‐performance electronic and optoelectronic devices owing to their unique material merits. However, it is still challenging to fabricate high‐quality and large‐scale ultrathin 2D OSCs with controllable molecular layers due to the disordered molecular deposition and uncontrollable mass transport in solution‐processing fabrication. Here, a vapor‐induced meniscus modulating strategy for preparing unidirectional and stable Marangoni flow to guide contactless meniscus evolution is reported, which ensures uniform mass transport and ordered molecular deposition to achieve high‐quality ultrathin 2D OSCs. Both the surface tension difference and the substrate wettability are critical to meniscus formation, which results in various meniscus deformation states and film morphologies. Based on the optimized vapor‐solvent system, ultrathin 2D OSCs of C8‐BTBT with precise layer definition are prepared controllably. The discrepancies in liquid film height and solute concentration are decisive in controlling the molecular scale thickness ranging from mono to a few layers. Moreover, the layer‐dependent electronic and optoelectronic properties of the ultrathin films are systematically investigated. Notably, high‐performance polarization‐sensitive solar‐blind photodetectors are achieved with a dichroic ratio of photocurrent up to 2.26, and the corresponding polarimetric image sensor exhibits superior solar‐blind polarization imaging capability thanks to the high crystalline quality.

Theoretical study of the tuning role of β-methylthio or β-methylselenyl on the charge-transport properties of acenedithiophenes derivatives.

To date, the manipulation of intermolecular nonconjugation interactions in organic crystals is still a great challenge due to the complexity of weak intermolecular interactions. Here we designed molecules substituted by β-methylselenyl on naphtho[1,2-b:5,6-b']dithiophene and anthra[2,3-b:6,7-b']dithiophene, respectively (anti-β-MS-NDT, anti-β-MS-ADT), which together with anti-β-MS-BDT synthesized experimentally all exhibited 2D brickwork π-stacking. Moreover, their maximum molecular carrier mobilities reached 3.30 and 16.46 cm2 V-1 s-1. These results indicated that the substitution of β-methylselenyl could be a strategy to directionally adjust the parent herringbone stacking into 2D brickwork π-stacking. Hirshfeld surface analysis and symmetry-adapted perturbation theory (SAPT) were used to investigate the nonconjugated interactions in the pitched π-stacking formed by the β-methylthio-substituted acenedithiophene derivatives and the 2D brickwork π-stacking of the β-methylselenyl-substituted ones; wherein, the steric hindrance caused by the introduction of the substituents promoted Csp2-Csp2⋯π interactions to replace Csp2-H⋯π to stabilize the face-to-face stacking. Moreover, by calculating the decomposition energy of the intermediate state model of the molecular stacking mode that may exist in the replacement conversion process, it was found that the energy of this intermediate state was larger than that of the actual ones, finally confirming the inevitability of the actual existence in this stacking. In addition, because of the reduction in intensity of the special vibration modes, it could be found that the β-methylselenyl substitution showed better phonon assistance than β-methylthio substitution in terms of dynamic disorder. This study is a further step toward fully understanding the relationship between intermolecular interactions and regulation of the molecular stacking.

Binary solvent engineering for small-molecular organic semiconductor crystallization

This article reviews the synergistic effects of engineering binary solvents on the crystallization, morphology and charge transport of organic semiconductors.

Shear-aligned large-area organic semiconductor crystals through extended π–π interaction

TIPS-PPP, a novel TIPS-PEN derivative, features a vertically extended pentacene core for increased π–π overlap, enabling exploration of structure–morphology–property connections and exhibiting enhanced stability/electronic performance.

Unraveling Molecular Design Principle of Ferroelasticity in Organic Semiconductor Crystals with Two-Dimensional Brickwork Packing

Ferroelasticity of organic single crystals has recently attracted great research interest. It is a reversible twinning transition in response to mechanical stress that imparts remarkable deformability to crystalline materials while allowing materials to retain their inherent functional properties. These appealing attributes of ferroelasticity promise high-performance ultraflexible, stretchable single-crystalline (opto-) electronics. In this work, we unravel structural criteria for ferroelastic transition of trialkylsilyl-acene (TAS-acene) crystals, which are known as high-performance organic semiconductor materials owing to two-dimensional electronic coupling. This study unveils that ferroelastic transitions are achievable only if two-dimensional brickwork packing is absent from both neighboring aromatic core and TAS side-chain interlocking. This is because aromatic core interlocking prevents cooperative molecular gliding and rotation during structural transition, while side-chain interlocking prevents TAS side-chain reconfiguration necessary for relieving steric strain occurring upon the cooperative molecular motions. The correlation of molecular arrangement and ferroelastic transition capability revealed herein will provide insight into the material design principle of inherently flexible organic semiconductor crystals.

Charge Transport in Twisted Organic Semiconductor Crystals of Modulated Pitch.

Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. Here, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.

The Crystalline Behavior and Device Function of Nonfullerene Acceptors in Organic Solar Cells

AbstractThe current research investigates the structure features and intermolecular interactions of nonfullerene acceptors (NFAs) in single crystal and thin films, as well as their solar cell applications. Guiding parameters and key intermolecular forces that lead to 2D brickwork or 3D web packing are identified. The atomic modification is shown as the key to induce hydrogen bonding or π–π stacking column, which results in different crystalline packing. The molecular assembly in thin film is initiated by hydrogen bonding, and completed by π–π stacking reorganization. The packing energy is seen as a guiding parameter that dictates the NFA crystalline morphology in blended thin films. The crystalline packing motif is not directly related with device efficiency. However, the crystalline morphology is the key parameter to influence exciton/carrier dynamics and device performance. A broader picture on the scaling behavior of organic semiconductor crystals ranging from oligoacenes to NFAs is established.

Patterning of organic semiconductor crystal arrays via microchannel-assisted inkjet printing for organic field-effect transistors

Inkjet printing technique provides a low-cost way for large-area construction of the patterned organic semiconductors toward integrated organic electronics. However, because of a lack of control over the wetting and dewetting dynamics of organic inks, inkjet-printed organic semiconductor crystals (OSCCs) are frequently plagued by the ‘coffee ring’ effect and uncontrollable growth process, leading to an uneven crystal morphology and disordered orientation. Here, we report a universal microchannel-assisted inkjet printing (MA-IJP) method for patterning of OSCC arrays with ordered crystallographic orientation. The micro-sized channel template not only provides a unidirectional capillary force to guide the wetting process of organic inks, but also confines the evaporation-induced dewetting behavior, enabling the long-range ordered growth of OSCCs. The patterned 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) crystals present one-dimensional structures with a pure (010) crystallographic orientation. The 7 × 7 discrete organic field-effect transistor array made from the patterned C8-BTBT crystals exhibits a high average mobility up to 3.23 cm2 V−1 s−1 with a maximum mobility of 5.36 cm2 V−1 s−1. Given the good generality of the patterning process and high quality of the obtained OSCC crystal array, it is anticipated that our MA-IJP approach will constitute a major step toward integrated electronic and optoelectronic devices.

Organic Semiconductor Crystal Engineering for High‐Resolution Layer‐Controlled 2D Crystal Arrays (Adv. Mater. 22/2022)

2D Crystals Combining interface assembly of 2D organic semiconductor crystals (2DOSCs) with a poly(dimethylsiloxane)-mold-assisted selective-contact evaporation printing technique, in article number 2104166, Liqiang Li and co-workers report the fabrication of large-area, high-resolution (1271 dpi) and layer-controlled 2DOSC arrays, which would be highly meaningful for device integration.