Crystalline Dolomite Research Articles

Coupled Effects of Paleofluid Evolution on Ultra-deep Microbialite Reservoir Modification: A case study of the upper Ediacaran Deng-2 Member within the Penglai area of central Sichuan Basin, SW China

Paleofluid-rock interaction results in the modification of the ultra-deep reservoir quality, but the coupling effects of the paleofluid evolution on reservoir quality modification are still underestimated. Here, the multi-stage dolomite cements have been studied by means of core observations, thin section identification, fluid inclusions, and in situ elements and isotopic analyses in order to reaveal the paleofluid evolution processes and their effects on the reservoir quality. The fibrous dolomite cement (FDC) and bladed dolomite cement (BDC) both have similar geochemical properties and homogenization temperature (Th) to the matrix dolostone. Subsequent early silicification occurs (QZ1). However, silt- to fine-sized crystalline dolomite cement (CD2) has higher concentration of Fe and medium rare earth element, more negative δ18O than for FDC and BDC, and 103.4 to 150.2 °C in Th. The first petroleum charge episode solid bitumen 1 (SB1) followed the CD2. The medium to coarse sized crystalline dolomite cement (CD3) is characterized by the higher Mn and lower Sr concentration than CD2, positive δEu anomaly, negative δ13C and δ18O, high 87Sr/86Sr ratio and 138.9 °C to 184.3 °C in Th. The solid bitumen 2 (SB2) occurs after CD3. Subsequently, the saddle dolomite (SD) has higher Fe and Mn concentration and lower Na and Sr than others cement, δEu positive anomaly, negative δ13C and δ18O, high 87Sr/86Sr ratio and 177.5 °C to 243.6 °C in Th. Eventually massive silicification (QZ2) took place. The FDC, BDC, QZ1 and SB1 formed in the early diagenetic stage and have little negative effect on the reservoir quality. But the CD2 and CD3 dramatically decreased the reservoir quality related to a quantity of hydrothermal fluids entrance in the mesodiagenetic stage along the strike-slip faults and the unconformity surface at top of the Deng-2 Member during the late stage of the Caledonian orogeny. The reservoir spaces were retained and enlarged during the late diagenetic stage when the peak petroleum charge occurred, massive silicification and thermochemical sulphate reduction took place with SB2, SD and QZ2 being formed. The research outcome may update our understanding on the retention mechanism and the insights for further hydrocarbon exploration of Precambrian ultra-deep microbial reservoirs.

Seismic Characteristics and Distribution Patterns of Maokou Formation Dolomite Reservoirs in The Hechuan Area of Central Sichuan

Abstract In recent years, the exploration of dolomite reservoirs of the Permian Maokou Formation in the Hechuan area has made a breakthrough, making the Maokou Formation the main exploration layer in the central part of the Sichuan area. The reservoir lithology of the Maokou Formation in central Sichuan is mainly composed of fine to medium crystalline dolomite and residual granular dolomite. The dolomite reservoir is relatively thin, located in the middle of the second member of Maokou Formation vertically and distributed stably laterally. Based on rock physics, this study analyzes the factors influencing the seismic response characteristics of the dolomite reservoir of Maokou Formation, and makes it clear that the dolomite reservoir shows the characteristics of continuous strong peak reflection in the seismic profile. By analyzing the positive correlation between reservoir quality and amplitude intensity, the amplitude attribute can be used to determine the favorable area of dolomite reservoir development, and the reservoir distribution can be quantitatively described by seismic inversion. According to the seismic attributes, the dolomite reservoirs are distributed in contiguous regions, mainly along the TS3 ~TS4~TS11~MX39, which are distributed in a NW - SE direction. Seismic inversion results further clarify the stable distribution of dolomite reservoirs, with regional contiguous features. Through the study, it is clear that the favorable area of the dolomite reservoir in the second member of Maokou Formation is distributed in the central part of the Hechuan area, and the area of the reservoir is more than 1200km2. Multiple Wells have been deployed to obtain more than one million square meters of industrial air flow, and billions of square meters of proved reserves have been submitted.

Update on the 53Mn-53Cr ages of dolomite in the Ivuna CI chondrite and asteroid Ryugu sample

Aqueous alteration in planetesimals is one of the earliest geological processes in the solar system. The timing of aqueous alteration sheds light on the timescale of material evolution through water–rock interaction in small bodies. The 53Mn-53Cr decay system, where a short-lived radionuclide 53Mn decays to 53Cr with a half-life of 3.7 Myr, is a powerful tool for dating carbonates in primitive meteorites that formed during aqueous alteration. In CI chondrites and samples returned from asteroid Ryugu, a major carbonate mineral is dolomite (CaMg(CO3)2) and could be dated precisely because of their relatively high Mn abundances. However, the lack of a proper dolomite standard for secondary ion mass spectrometry (SIMS) hinders us from obtaining accurate Mn/Cr ratios of carbonates, resulting in erroneous formation ages. In this work, we synthesized Mn-, Cr-, and Fe-bearing crystalline dolomite as standard materials and evaluated the relative sensitivity factor (RSF) of Mn/Cr for SIMS analysis, namely, the ratio of Mn/Cr obtained using SIMS to true Mn/Cr. We found that the RSF values of the dolomite standards range from 0.8 to 0.9, slightly higher than that of calcite (CaCO3) (∼0.7), and increase with their Fe contents. We used the newly evaluated RSF values to date dolomite in the Ivuna CI chondrite and obtained an initial 53Mn/55Mn ratio of (3.95 ± 0.49) × 10−6 (95 % confidence interval) and the corresponding absolute age of 4564.0 + 0.6/−0.7 Ma. Our new initial 53Mn/55Mn ratio is 26 ± 19 % higher than that obtained by a previous study for the same dolomite grain using a calcite standard. This difference is consistent with the difference between the RSF values of dolomite and calcite. Based on these results, we updated the initial 53Mn/55Mn ratio previously reported for dolomite in the Ryugu sample A0058 to be (3.21 ± 0.66) × 10−6, which corresponds to an absolute age of 4562.8 + 1.0/−1.2 Ma. This age seems to be the best estimate for the formation age of dolomite in Ryugu currently available.

Dolomite occurrence within drift deposits, Maldives archipelago

Considerable attention has been dedicated to the sedimentological processes associated with carbonate drift and contourite deposits, but a noticeable gap exists in the understanding of the diagenetic aspects of those deposits, especially dolomitization. This study presents an examination of dolomites from Middle to Late Miocene drift deposits collected during IODP Expedition 359 to the Maldives archipelago. Multiple geochemical parameters and petrographic analysis are used to explore the potential role of closed versus open system dolomitization in the two oldest drift sequences, which are overlain by a multimillion year-long hiatus. Overall, dolomite abundance is variable, but 50 % to nearly 100 % in a 30 m thick interval below the unconformity surface at one of the examined sites. The dolomite in the study interval consists of very fine-to-fine-sized crystalline dolomite cements and mimetically replaced dolomite grains. All dolomite is non-stoichiometric (mean 42.7 ± 2.0 mol% MgCO3) and mostly poorly ordered. Geochemical attributes include relatively invariant δ13C (+1.3 ‰ to +1.7 ‰ VPDB) and relatively high Sr concentrations in dolomite cements (mean 505 ppm) and dolomitized grains (mean 784 ppm). δ18O values and the constraints of burial histories indicate dolomitization in normal marine seawater at burial depths of 0 to 300 m and temperatures of ∼10 °C–14 °C below an ocean water column 100 to 400 m deep. Sr-isotope ages suggest dolomitization of the most extensively dolomitized interval below the unconformity occurred between 12.3 Ma and 6.7 Ma. Overall, the geochemical data and previously published δ34SCAS data suggest a closed, diffusion-dominated system created most of the dolomite. However, the youngest dolomite's age and bulk rock Sr isotope ages of calcitic rocks at the base of the drift deposits can only be explained by the advective flux of seawater through all the drift deposits. Furthermore, the geological context, including permeable facies, ocean current patterns, and other indicators, such as the absence of hardground or permeability barriers, suggests that some open system dolomitization may have also occurred.

Rock physical characteristics of deep dolomite under complex geological conditions: A case study of 4th Member of Sinian Dengying Formation in the Sichuan Basin, China

The deep-ultra deep carbonate reservoir in China, commonly subjected to modification of multi-stage diagenesis, has extremely high heterogeneity. Conventional rock physics analysis cannot accurately identify the elastic responses of reservoir. Here, the rock physics properties of the dolomite from the 4th Member of the Sinian Dengying Formation are experimentally measured, and the change law of rock physics characteristics is investigated within the framework of the diagenetic processes by the analysis of the elastic and petrologic characteristics, pore structure, and sedimentary environments. The results show that the differentiated diagenesis results in different pore structure characteristics and micro-texture characteristics of the rock. The microbial dolomite of the algal mound-grain beach facies is subjected to the contemporaneous microbial dolomitization and seepage-reflux dolomitization, penecontemporaneous selective dissolution, burial dolomitization, and hydrothermal dolomitization. The resultant crystalline dolomite is found with one main type of the dolomite crystal contact boundaries, and the dissolution pore is extensive development. The siliceous, muddy, and limy dolomite of the inter-beach sea environment mainly experiences the weak capillary concentration dolomitization, intensive mechanical compaction-induced densification, and burial dolomitization. Such crystalline dolomite is observed with four types of contact boundaries, namely the dolomite contact, clay contact, quartz contact, and calcite contact boundaries, and porosity mostly attributed to residual primary inter-granular or crystalline pores. The samples with the same crystal boundary condition have consistent correlations between the compressional- and shear-wave velocities, and between the compressional-wave velocity and the velocity ratio. Additionally, the variation of the acoustic velocity with effective pressure and the intensity of pore-scale fluid-related dispersion are controlled by the differentiation of pore structure types of the samples. The varied effects of soft pores like micro-cracks on the compressional- and shear-wave velocity causes considerable changes in the relationships between the compressional- and shear-wave velocities, compressional-wave velocity and velocity ratio, and porosity and acoustic velocity. This research is an attempt to demonstrate a novel method for investigating the rock physics variation of rock during the geological process, and the obtained findings can provide the rock physics basis for seismic prediction of the characteristics of deep carbonate reservoirs.

Characteristics and Controlling Factors of Natural Fractures in Deep Carbonates of the Puguang Area, Sichuan Basin, China.

Understanding the types, characteristics, and controlling factors of natural fractures in deep and ultradeep carbonates is crucial for evaluating reservoir quality, optimizing well deployment, and comprehending their impact on hydrocarbon exploitation. Multiple types of natural fractures are widespread in the deep carbonates of the Feixianguan Formation in the Puguang area, northeastern Sichuan Basin, China, and the main controlling factors are complex. Based on geological, geophysical, and experimental data, this study defined fracture types and analyzed the fracture development characteristics in the deep Feixianguan carbonates. On this basis, the main geological factors that control the development and distribution of tectonic fractures were discussed by combining statistical and experimental analyses. Results indicate that natural fractures in the Feixianguan Formation can be genetically classified into tectonic and diagenetic fractures. Specifically, tectonic fractures include shear fractures and tensile fractures, in which the former are predominant. In the Feixianguan carbonates, tectonic shear fractures are mainly developed in the NE-SW and near E-W strikes, with dip angles mostly ranging from 30 to 70°. The majority of shear fractures appear on a small scale and have good effectiveness. The fracture heights and apertures are commonly less than 50 cm and 25 μm, respectively, and unfilled fractures account for more than half. The distribution and development of tectonic fractures are mainly controlled by lithology, mechanical stratigraphy, reservoir physical properties, diagenetic cementation, and faults. In the Feixianguan carbonates, tectonic fractures are more developed in crystalline dolomite. With the increasing thickness of mechanical stratigraphy, the fracture density decreases and the scale increases. The presence of early dissolution pores can prevent the formation of later tectonic fractures. Tectonic fractures in the NNW-SSE and near N-S strikes generally possess poor effectiveness due to multiple cementations after their formation. In the vicinity of faults, tectonic fractures generally stretch subparallel to the extension direction of the fault, and the development degree of fractures close to major faults is higher.

Resistance of eogenetic dolomites to geochemical resetting during diagenetic alteration: A case study of the lower Qiulitage Formation of the Late Cambrian, Tarim Basin

Rare earth elements (REEs), carbon, oxygen and Mg isotopes have been widely used to explain the origin of dolomite, but dolomite may undergo complex diagenetic alteration during long geological processes, and whether the geochemical signals of precursor dolomite can be preserved is still unknown. In order to further explore the formation mechanism of dolomite and the influence of diagenetic alteration processes on geochemical parameters, this paper takes the thick-layer dolomite of the Lower Qiulitage Formation of the Late Cambrian in the Tazhong uplift area as an example and divides the dolomite into two categories through petrologic observation. One category is fabric-retentive dolomite (FRD), including algal clotted dolomite, algal psammitic or psammitic grain dolomite, and aphanocrystalline dolomite; the other category is fabric-destructive dolomite (FDD), including crystalline dolomite (CD) and siliceous dolomite (SD). Cation ordering, unit cell parameters, major/trace elements, REEs as well as C–O–Mg isotopes of the pure matrix powders of different types of dolomites are further analyzed. The results show that the dolomites are near-source/far-source seepage reflux type and sabkha type eogenetic origin, and the magnesium ions mainly come from Late Cambrian seawater; dolomite crystals of different sizes are the result of the precursor dolomite suffering varying degrees of recrystallization during the early diagenesis period, inheriting the original geochemical characteristics; hydrothermal alteration occurs in the late stage of diagenesis, with limited magnesium ions in the hydrothermal fluid. Its impact on the dolomite is mainly reflected in local dolomite distortion and a large amount of aphanocrystalline silica and coarse-grained quartz cement filling, which fails to obviously reset the geochemical information of the matrix dolomite. The above results demonstrate that, under favorable conditions, early genetic marine dolomites may resist geochemical resetting over time intervals of more than 400 million years.

Characteristics and controlling factors of the unconformity-related carbonate reservoir: a case study from Sinian Shuiquan Formation, Tarim Basin, northwestern China

Deep-buried marine carbonate reservoirs in the Tarim Basin present challenges for exploration. A regional unconformity in dolomite at the top surface of the Shuiquan Formation makes the carbonate rocks ideal reservoirs. This study determines the unconformity belt distribution, lithology, reservoir space types and the controlling factors of the Shuiquan Formation, to establish a paleokarst development model and predict the favourable exploration targets. By flattening the seismic-event section and tracking truncation points on the seismic profiles, the unconformity area and denudation trends of the Shuiquan Formation are identified. The denudation area appears on a NEE-trending plane as a band with a width of 10–20 km and a thickness that expands from the depression to the slope and uplift. The Sinian Shuiquan Formation developed in a carbonate platform–tidal flat environment. Outcrop, core, well logging, and thin-section observations reveal that the lithology of the Shuiquan Formation consists of crystalline dolomite and granular dolomite, with pore types that include intercrystalline dissolution pores, intercrystalline pores and structural fractures. Unconformity, karstification and tectonic activity with atmospheric freshwater leaching, storage space and communication channels, respectively, are considered crucial factors influencing carbonate reservoir formation in the study area. A prediction model for the carbonate reservoirs in the Tadong area shows that the strong karst belt on the slope is the ideal area for forming a carbonate reservoir.

Characteristics and origin of crystalline dolomite: A case from Paleogene lacustrine fine-grained rocks in Jiyang depression, Bohai Bay Basin, China

Crystalline dolomite is a common carbonate mineral in lacustrine fine-grained rocks, but it has a confusing origin that has been a focus of much debate in recent years. In our research, the fine-grained rocks rich in crystalline dolomite were sampled from the upper fourth member (UMbr 4) and lower third member (LMbr 3) of the Shahejie Formation in the Jiyang Depression, and analyzed by a variety of analytical techniques, including field emission scanning electron microscopy (FESEM), cathodoluminescence (CL), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), micro-area carbon, oxygen, strontium isotopes and electron probe analyses. The results show: ①The crystalline dolomites in the lacustrine fine-grained rocks are primarily composed of ferroan-poor dolomite (FeO < 1%), type I ferroan dolomite (FeO ≈ 5%) and type II ferroan dolomite (FeO ≈ 16%); ②The δ18O of ferroan-poor dolomites in mudstone is between −0.89 and 0.32‰, the precipitation temperature is less than 60 °C, and their formation is related to the microbial action during the early diagenetic stage A, while the ferroan-poor dolomites in dolostone are primarily formed by the recrystallization of micritic dolomite; ③The δ18O of type I ferroan dolomites ranges from −3.74 to −3.89‰, the precipitation temperature ranges from 68.4 to 69.4 °C, and they are primarily formed by the microbial action and clay mineral transformation during the early diagenetic stage B; ④The δ18O of type II ferroan dolomites is between −7.78 and −8.33‰, the precipitation temperature is more than 90 °C, and their formation is related to the dissolution of early carbonate and clay mineral transformation during the middle diagenetic stage; ⑤The origin mechanism of crystalline dolomite indicates the diagenetic evolution of fine-grained rocks and the migration path and storage of shale oil.

Rock physics characteristics and their control factors of carbonate in different sedimentary microfacies of the Yingshan Formation, Gucheng Area, Tarim Basin

Abstract Understanding the influence of geological characteristics on rock physics properties is crucial for accurately recognizing the relationship between rock physics variation and reservoir characteristics. Unlike the conventional rock species, the rock physics properties of the deep carbonate rocks in the third member of Yingshan Formation (Ying-III Member) in Gucheng area, Tarim Basin are relatively more complex. To address this problem, we investigated the rock physics characteristics and controlling factors of different sedimentary microfacies samples, combined with sedimentological analysis and rock physics experiments. The results show that the sedimentary environment affects the lithology and pore structure by controlling the properties of the primitive rock and early diagenesis. Dolomitized shoal microfacies and shoal top dolomitic flat microfacies primarily form crystalline dolomite and siliceous dolomite, with pores consisting of inter-crystalline pores, dissolution pores, and cracks. Inter-shoal dolomitic flat microfacies develops silty dolomite, with only a few inter-crystalline pores and cracks. Middle- to high-energy shoal microfacies and inter-shoal sea microfacies develop tight calcarenite and micritic limestone. Samples with similar mineral composition have relatively consistent density values and acoustic properties. Soft pores, such as micro-cracks, have a significant impact on the effective pressure and acoustic wave velocity, velocity and velocity ratio, and velocity and porosity relationships. The research shows a new approach for the rock physics characteristics of deep carbonate reservoirs under geological background constraints, as well as the rock physics basis for seismic prediction of the Ying-III Member reservoir.

Petrological, Geochemical and Chronological Characteristics of Dolomites in the Permian Maokou Formation and Constraints to the Reservoir Genesis, Central Sichuan Basin, China

The Middle Permian Maokou Formation in the Sichuan Basin has huge resources and is an important target for natural gas exploration. In recent years, significant exploration breakthroughs have been made in the dolomite field of member Mao-2 in central Sichuan, and the gas production of several wells has exceeded 1 × 106 m3/d, indicating promising prospects for exploration. However, the origin of the dolomite reservoir in member Mao-2 remains ambiguous, which restricts the accurate prediction of favorable reservoirs. This study focuses on drilling in the Hechuan area as its research object, by using a detailed description of the cores from member Mao-2 of seven wells; samples were selected for tests of the degree of dolomite cation ordering, stable carbon and oxygen isotopic compositions, strontium isotopic composition, rare earth elements, LA-ICP-MS element mapping and U-Pb dating. It is clarified that: (1) The crystalline dolomite of member Mao-2 in the Hechuan area is the main reservoir rock, and the heterogeneous vugs and fractures are the main reservoir space. The dolomite in member Mao-2 has been characterized by a low degree of cation ordering value (avg. 0.59), with values of δ13C (avg. 3.87‰), δ18O (avg. −7.15‰) and 87Sr/86Sr (avg. 0.707474) having similar geochemical characteristics to Middle Permian seawater; the REEs normalized distribution patterns have similar characteristics to limestone; and the U-Pb age (261.0~262.0 Ma) corresponds to the age in the Capitanian stage of the Permian Guadalupian Series. (2) Petrological studies show that member Mao-2 has vertical karstification zonation characteristics; syngenetic karstification controls the formation of a large-scale fracture-cave system in the phreatic zone; the dolomitization of sediment in the fracture-cave system occurred during the penecontemporaneous period with locally restricted seawater. (3) The main controlling factors of the reservoir were syngenetic karstification, early dolomitization and hydrothermal dissolution related to Emei taphrogenesis. The research results are of great significance for dolomite reservoir prediction; the highlands of paleogeomorphology with syndepositional faults are favorable areas for dolomite reservoirs.

Mg isotopic geochemistry and origin of Early Ordovician dolomite and implications for the formation of high-quality reservoir in the Tabei area, Tarim Basin, NW China

The source and driving mechanism of Mg-rich fluids in the dolomitization process of the Lower Ordovician Penglaiba Formation in the Tarim Basin have not been effectively traced, limiting the accuracy of the prediction of high-quality dolomite reservoirs. In this study, based on Mg isotopes combined with petrology, trace elements, and C-O-Sr isotopes, the powder crystalline dolomite (D1) and fine crystalline dolomite (D2) of the Penglaiba Formation were found to have high Na and Sr contents and low Fe and Mn contents. The REE, δ13C, δ18O and 87Sr/86Sr ratios ranges were similar to those of seawater, and δ26Mg shows a steady downward trend. The dolomitization fluids of D1 and D2 were derived from seawater and migrated vertically downward. Penecontemporaneous dolomitization is beneficial for the inheritance and preservation of original rock pores. The Na and Sr contents of medium crystalline dolomite (D3) and coarse rystalline dolomite (D4) were low, whereas the Fe and Mn contents were high. The REE, δ18O and 87Sr/86Sr ratios differed from those of seawater, and δ26Mg shows a fluctuating trend. The fluids for the precipitation of D3 and D4 were sourced from concentrated marine pore water during burial, , with the dolomitization fluid migrating through intergranular pores and structural fractures. Burial dolomitization has preservation, adjustment, and transformation effects on dolomite reservoirs. Deep high-quality dolomite reservoirs are not only controlled by the original sedimentary environment, but is also affected by late-stage or subsequent burial transformation.

Correlations between Petroleum Reservoir Fluid Properties and Amount of Evolved and Dissolved Natural Gas: Case Study of Transgressive–Regressive-Sequence Sedimentary Rocks

It is well recognized that PVT data are essential in oil and gas production facilities as well as in the determination of the reservoir fluid composition in reservoir engineering calculations. In the current work, the studied borehole is located in Tawke oilfield in the High Folded Zone. The structural geology and lithological facies of rocks are studied and found to comprise fine crystalline dolomite and anhydrite interbedded with claystone and dolomite. In addition, the practical PVT data of black oil from Tawke oilfield, Zakho, from reservoirs to transgressive–regressive cycles, are studied. The PVT data are investigated to derive the empirical models that rule and correlate the properties of the reservoir fluids in terms of the amount of natural gas (methane, ethane, and propane) dissolved in reservoir fluids and evolving from the wells. The characteristics of the reservoir fluid, including °API, viscosity at reservoir pressure and bubble-point pressure, reservoir pressure and temperature, gas–oil ratio (GOR), coefficient of compressibility at reservoir pressure, gross heating value, and sample depth, are correlated. The lithological part reveals that the carbonate and some clastic rock facies are conducive to enhancing natural gas adsorption. The reservoir fluid properties show adverse effects on the amount of natural gas constituents evolving from the wells, while it shows positive effects on the dissolved reservoir fluids. The estimated empirical correlations can help indicate the quantity of natural gas that is dissolved in reservoir fluids and liberated from the wells depending on the characteristics of the reservoir. In addition, they can be used in numerical simulators to predict oil well performance.

Controls of sedimentary facies and sealevel fluctuation on dolomitization: The Lower Cambrian Longwangmiao Formation in Sichuan Basin, China

The Lower Cambrian Longwangmiao Formation is a significant deep carbonate (dolomite) reservoir that has great hydrocarbon potential in the Sichuan Basin, South China. However, the origin of the Longwangmiao dolomite and the mechanism of dolomitization remain a debate that needs better understanding due to its crucial importance in determining reservoir quality. In the current study, a multi-technique approach of petrography, geochemistry (C- and O-isotopes, major and trace elements including rare earth elements), and microthermometry has been applied to reconstruct the mechanisms of dolomitization. Petrographic examinations revealed three types of matrix dolomite: (1) near-micritic (dolomicrite), fabric retentive texture (Md1, 10–50 μm), (2) finely to medium crystalline dolomite, subhedral to euhedral crystals (Md2, 60–120 μm), and (3) medium to coarsely crystalline dolomite, subhedral to nonplanar crystals (Md3, 100–300 μm). The similarity of PAAS-normalized REE patterns of the investigated dolomites to that of their precursor lime mudstone and their δ13C (C1 = 0.3 ± 0.3‰, Md1 = −1.3 ± 0.6‰, Md2 = −0.6 ± 1.6‰, and Md3 = 0.3 ± 1.5‰) and δ18O (C1 = −9.4 ± 0.2‰, Md1 = −7.8 ± 0.8‰, Md2 = −8.7 ± 0.5‰, and Md3 = −8.9 ± 0.6‰) values suggest that the parent dolomitizing fluids of Md1, Md2, and Md3 dolomites were likely modified seawater. The significant enrichment of Na (1266 ± 1316 ppm) and K (4649 ± 3199 ppm), tight structure and presence of moldic pores in Md1 and its slightly elevated δ18O values suggest that it formed in a near-surface (i.e., mesosaline to penesaline) environment from slightly evaporated seawater, which is consistent with its Sr/Ca molar ratios (0.0075−0.0090). The Md2 dolomite is crosscut by stylolites and has a coarser grain size, higher Mn (295 ± 172 ppm), NdSN/YbSN (1.33 ± 0.06) and U (0.49 ± 0.11 ppm), and lower Ce/Ce* (0.83 ± 0.02) values than Md1. This suggests a shallow to mid-burial dolomitization with possible downwards seepage-reflux of Mg2+-rich evaporated brines. The Md3 dolomite has the largest crystal size and mosaic contacts, lowest Ce/Ce* (0.81 ± 0.02), and highest U (0.64 ± 0.15 ppm) and Mn (487 ± 240 ppm) values, which imply a deeper dolomitization environment than Md2. Thus, it precipitated likely in a mid-to deep burial setting at a higher temperature (Th = 120−135 °C), from the residual Mg2+-rich fluids stored in the strata pores. Considering the regional geology, we suggest the sedimentary facies and paleogeomorphology controlled the spatial distribution of early dolomites, while sealevel fluctuations influenced the initial time and scale of dolomitization.

Alteration effects of karstification and hydrothermalism on middle Permian Qixia formation at the Wulong section, South China

Middle Permian Qixia Formation in the southwestern region of Sichuan (SW China) has experienced multiphase fluidisation, resulting in an unclear understanding of the reservoir reconstruction effect. In this study, a systematic analysis of the Qi2 member in Wulong Town was carried out by combining field outcrop petrology and geochemistry. The results demonstrated that multiple sets of crystalline dolomite-bioclastic limestone cycles were stacked vertically in the Qi2 member, accompanied by the development of fractures and karst channels. The dolomite was mainly composed of silty-fine dolomite (D1) and recrystallised dolomite (D2). Furthermore, obvious multiphase dolomitic cements (Cd1-Cd2) were present in the fractures and pores. Early karst is known to have lithologic mutation surface development and karst channel development at the top of several secondary cycles. The vadose silt dolomites (Cd1) having karst channels developed dull luminescence under cathode luminescence (CL). Both the geochemical indicators of elements and rare earth element (REE) content indicated dysoxic-oxic environmental conditions. The hydrothermal solution displayed tectonic carniole characteristics in the strata burial stage. Fractures and pores were filled with hydrothermal minerals such as coarse dolomites-saddle dolomites (Cd2, with some caused by recrystallisation of the Cd1 hydrothermal solution) and fluorites. Coarse dolomites-saddle dolomites developed dull-red luminescence with a bright-red rim under CL and their δ18OVPDB values were more negative than those of middle Permian limestone samples. Both the geochemical indicators of elements and REE content indicated the suboxic-anoxic environmental conditions. Karstification had minor constructive impact on the reservoir of the Qi2 member in Baoxing in southwestern Sichuan. Most products of karstification were distributed as fillings in channels. Aside from creating certain networked fractures, the hydrothermal solution was mainly filled with hydrothermal minerals along the fractures, pores and early karst channels. Karst and the hydrothermal solution mainly damaged the middle and upper parts of the middle Permian Qixia Formation in Southwest Sichuan. The impact of episodic fluid on the restoration of the carbonate reservoir was mainly restricted by channels for fluid migration and thickness differences among the reservoir. However, certain thick-layered and massive crystalline dolomite may hold promise for exploration.

Characteristics and Controlling Factors of Crystalline Dolostone Reservoirs of the Sanshanzi Formation, Central-Eastern Ordos Basin, Northwestern China

In recent years, Ordos Basin has been the largest petroleum field in China and represents significant potential for gas exploration in the Lower Paleozoic carbonate reservoirs. Taking the central-eastern Ordos Basin as an example, this work studies the reservoir characteristics, origin, and controlling factors of the crystalline dolomites of the Sanshanzi Formation by means of petrological and geochemical studies. The Sanshanzi Formation dolostones comprise three kinds: crystalline dolostone with grain-shadow (Rd1), very fine–fine crystalline dolostone (Rd2), and medium-coarse crystalline dolostone (Rd3). The pore spaces include intercrystalline pores and intercrystalline solution pores, residual intergranular pores, vugs, and fractures. The medium-coarse crystalline dolostone is the best reservoir. The average porosity is 4.61%, and the average permeability is 0.91 mD. The sedimentary environment in the upper Cambrian was a large area of tidal flats. Under the influence of penecontemporaneous meteoric water leaching, dissolution developed at the top of the dolomite flat–lagoon depositional cycle, with vugs developing in the very fine–fine crystalline dolostone. Penecontemporaneous dolomitization enhanced the compaction resistance and effectively preserved the pore space of the reservoir. In addition, recrystallization improved the crystalline texture, turning the intergranular pores into residual intergranular pores and intercrystalline micropores into intercrystalline pores. In this case, the very fine–fine crystalline dolostone was transformed into medium-coarse crystalline dolostone. The results of this study provide a case for the in-depth understanding of the development and preservation mechanism of ancient dolomite reservoirs and also point to the research pathways for oil and gas exploration in the Cambrian in the Ordos Basin in the future.

The Origin of the Upper Cambrian Basin-Scale Massive Dolostones of the Xixiangchi Formation, Sichuan Basin, China

The thick Upper Cambrian Xixiangchi dolostones, developed in the Sichuan Basin, are an important deep exploration target, but their genesis is still controversial, which hinders predicting the porous dolomite distribution and related potential hydrocarbon play. Herein, based on the observation and sampling of field outcrops, combined with a microscopic thin section analysis, cathodoluminescence analysis, and geochemical study, their characteristics and genesis were investigated. The results showed that there are mainly three types of dolomite that can be distinguished: (1) fine crystalline dolomite with a low crystallinity (Type 1); (2) granular dolomite with coarse grains, maintaining the original particle structure (Type 2); and (3) grain-texture relict dolomite with a higher degree of crystal form and obvious recrystallization (Type 3). The Type 1 dolomite with a common lamina structure and the highest 87Sr/86Sr ratio implies the most continental-influenced seawater in a supratidal environment around paleouplift, where there is an evaporation pump effect in its formation. The Type 2 dolomite recorded a slightly higher diagenesis temperature and slightly lower brine salinity, which would be formed in a seepage-reflux model in the beach environment of the platform. The lowest REY content and higher dolomite temperature with structural residuals indicate that the Type 3 dolomite is the result of further burial dolomitization during the diagenetic process.

SEDIMENTOLOGY, PALAEOGEOGRAPHY AND DIAGENESIS OF THE UPPER PERMIAN (Z2) HAUPTDOLOMIT FORMATION ON THE SOUTHERN MARGIN OF THE MID NORTH SEA HIGH AND IMPLICATIONS FOR RESERVOIR PROSPECTIVITY

This paper provides an updated understanding of the reservoir stratigraphy, sedimentology, palaeogeography and diagenesis of the Upper Permian Hauptdolomit Formation of the Zechstein Supergroup (“Hauptdolomit”) in a study area on the southern margin of the Mid North Sea High. The paper is based on the examination and description of core and cuttings data from 25 wells which were integrated with observations based on existing and new 3D seismic.Based on thin‐section petrography of cuttings and core from the wells studied, it is evident that Hauptdolomit microfacies are distributed in a relatively predictable way, and well‐defined platform interior, platform margin, slope and basin settings can be distinguished. Platform margins are typically characterised by the development of ooid shoals and, to a lesser‐extent, by microbial build‐ups. High‐energy back‐shoal settings are characterised by a more complex combination of peloid grainstones, thrombolitic and microbial build‐ups, and fine crystalline dolomites. Lower energy lagoons which developed further behind the platform margin are characterised by a variety of microfacies types; fine crystalline dolomites are common in this setting as well as peloidal facies and local microbial build‐ups. Intertidal and supratidal settings are typified by increased proportions of anhydrite and the development of laminated microbial bindstones (stromatolites). Platform margins are in general relatively steep and pass into slope and basinal settings. Only a few wells have penetrated Hauptdolomit successions deposited in a slope setting, and these successions are characterised by a range of resedimented shallow‐water facies together with low‐energy laminated dolomicrites and fine crystalline dolomites. Slope zones in the study area are interpreted from seismic data to be typically 1‐1.5 km in width. Basinal Hauptdolomit deposits have been strongly affected by post‐depositional diagenesis and are dedolomitised to variable degrees. The original depositional facies are rarely preserved.Diagenetic studies show that dolomitisation has affected almost the entire Hauptdolomit Formation throughout the study area in both basinal and platform settings. The dolomite is considered to result from seepage‐reflux processes and is an early diagenetic phase. Mouldic porosity is present in many facies types as a result of dissolution, especially in ooid grainstones, thrombolitic build‐ups and peloidal facies. The dissolution cannot be associated with any one diagenetic phase but was most likely a result of the dolomitisation process itself. Stable isotope analyses indicate that all dolomites were precipitated from Permian marine‐derived pore fluids. Fluid inclusion analyses of dolomite cements indicate that cementation continued into the burial realm. Anhydrite cementation occurs in two phases: early anhydrite precipitation was associated with dolomitisation, and can be distinguished from a later, pore‐filling cement which is highly detrimental to reservoir quality.The Hauptdolomit succession in basinal wells (and in some slope wells) in the study area has undergone significant dedolomitisation. Dedolomitisation was a shallow burial process which affected precursor dolomites, whereby excess calcium from the transition of gypsum to anhydrite during burial combined with CO2 and organic acids derived from basinal sediments. The process was triggered by excess calcium reacting with excess carbonate ions from dissolution.3D seismic volumes supplemented by numerous 2D lines were available in the study area and allowed an interpretation to be made of Hauptdolomit gross depositional settings; platform margins and base‐of‐slope polygons were mapped, with the greatest confidence in areas of 3D seismic. The basin, slope and platform settings were distinguished using seismic data integrated with the results of micro‐facies analysis and incorporating seismic‐to‐well ties. The data shows that large parts of the study area are characterised by the presence of polyhalites within the overlying (Z2) Stassfurt Halite Formation, which may create particular seismic geometries at the Hauptdolomit slope. These are interpreted to be intra‐Stassfurt Halite features, providing an alternative model to the thickened, prograded Hauptdolomit which has been suggested in previous publications.Because few wells drilled in the study area had the Hauptdolomit as the primary target, cores were limited but significant data was obtained from cuttings analyses. More than 400 thin sections were evaluated, allowing depositional models based on microfacies observations to be developed, verifying the seismic‐scale observations.

Sedimentary control on diagenetic paths of dolomite reservoirs in a volcanic setting: A case study of the Permian Chihsia Formation in the Sichuan Basin, China

The formation mechanisms of multi-stage dolomites and hydrocarbon reservoirs associated with volcanic activity are complex. This study investigated the Permian Chihsia Formation in the Sichuan Basin, China, which is the location of recent discoveries of giant natural gas reserves. We undertook a petrological and geochemical study, including trace element and C–O–Sr isotopic analysis. The quality of the dolomite reservoirs associated with volcanic activity was controlled by different diagenetic pathways associated with the sediment types and fault systems. Outcrop, core, and thin-section observations identified three types of replacement dolomite: very finely to finely crystalline dolomite (Rd1), medium crystalline patchy dolomite (Rd2), and coarsely to medium crystalline dolomite (Rd3). The tidal flat sediments only experienced limited seepage reflux dolomitization, which resulted in the formation of the dense very finely to finely crystalline dolomite (Rd1). The bioclastic grain shoal sediments deposited in a high-energy shallow-water environment contain abundant intergranular and dissolution pores, and vugs, which allowed convection of seawater and dolomitization during the initial phases of volcanic activity of the late early Permian. Subsequently, the bioclastic grain shoal sediments were mostly replaced by coarsely to medium crystalline dolomite (Rd3), which formed the highest-quality reservoirs in the study area. In addition, the incompletely dolomitized medium crystalline patchy dolomite (Rd2) was formed due to the low original porosity of micritic, peloidal, grain shoal sediments during a transgression in the middle and late depositional stages. During the peak of volcanism at the end-Guadalupian, deep faults allowed seawater to mix with ascending hydrothermal fluids, which resulted in the precipitation of dolomite cement in pores near the fault fracture zones, which blocked the pores. Therefore, these high-energy shoal sediments deposited in the slope break zone far from strike-slip faults have a relatively high porosity. Our results provide new insights into the origin of dolomite reservoirs formed in association with a volcanic setting, and are applicable to deep dolomite reservoirs worldwide.

Multistage dolomitization of deeply buried dolomite in the Lower Cambrian Canglangpu Formation, central and northern Sichuan Basin

The dolostone units in the Cambrian Changlangpu Formation of the Sichuan Basin have demonstrated substantial potential for natural gas exploration. A systematic understanding of the various dolomite (and non-carbonate) phases that build these rocks and the diagenetic pathways of the Canglangpu Formation carbonates still needs to be developed. This study combines the petrographic properties of dolomite (and non-carbonate) phases with their geochemical evidence (carbon, oxygen and 87Sr/86Sr isotope data). Moreover, fluid inclusion evidence and in situ rare-earth element (REE) data are presented. The samples studied were taken from hand specimens collected in the field and plugs from cores to explore the properties and evolutions of dolomite in the Cambrian Canglangpu Formation in the central-northern Sichuan Basin. Six dolomite phases are identified: silty crystalline dolomite (D1), fabric-retentive dolomite (D2), fabric-destructive dolomite (D3), fine crystalline dolomite (D4), medium to coarse crystalline dolomite cement (C1a and C1b) and saddle dolomite cement (C2). Silty crystalline dolomite represents the earliest dolomitization and shows δ18O values comparable to those of Cambrian seawater. Fabric-retentive dolomite, fabric-destructive dolomite and fine crystalline dolomite represent reflux dolomitization during shallow burial. Specifically, Fine crystalline dolomite with a turbid-core and clean-rim may have recrystallized from secondary dolomitization of marine-derived porewater. Fabric-destructive dolomite shows the depleted δ13C values, resulting from the secondary dolomitization involving organics degradation in medium to deep burial environment. The fluid inclusion data demonstrates that the medium to coarse crystalline dolomite cement (C1a) formed in relatively elevated temperature and salinity brines. Intrusion of sulfur- and metal-rich (Zn and Fe) medium-temperature hydrothermal fluids gave rise to the formation of medium to coarse crystalline dolomite cement (C1b) and sphalerite mineralization. Cementation of saddle dolomite was promoted by sulfate-rich reducing hydrothermal fluids. δ13C depletion, extremely low REE content and positive δEu in the saddle dolomite cement suggest the presence of thermal sulfate reduction.