Crystalline Carbon Research Articles

Metal Single Atom-Hydroxyl Incorporation in Poly(heptazine imide) to Create Active Sites for Photocatalytic Water Oxidation.

Poly(heptazine imide) (PHI) salts are extensively researched crystalline carbon nitride photocatalysts, but their photocatalytic water oxidation (PWO) performance is scarcely researched because of the difficulty in creating efficient active sites. Interference of metal ion (e.g., Na+ and K+) loss from the PHI salts in their PWO research has hardly been considered. Herein, metal single atom─OH (e.g., Co─OH) groups are incorporated into PHI to create efficient PWO active sites, via simple ion metathesis, hydrolysis, and deprotonation. The Co─OH modified PHI exhibits 9.3-fold higher PWO (oxygen evolution) activity than PHI, with an external quantum yield reaching 0.44% even at 600 nm. Excluding interference of the metal ion loss, the function of the Co─OH incorporation is evidenced mainly to facilitate the oxygen evolution reaction, as well as to promote photogenerated charge separation and raise visible light absorption, with the role of the OH especially revealed. Moreover, it is discovered that Na+ loss from sodium PHI will decrease its PWO activity, protonation of PHI has a detrimental effect on its PWO performance, and some other metal single atom─OH incorporation in PHI can also enhance its PWO activity. Overall, this work provides a general way to create PWO active sites in PHI.

Elucidation of crystalline morphology, crystallinity and mechanical properties of carbon fibre/PEEK composites under different cooling rates

Elucidation of crystalline morphology, crystallinity and mechanical properties of carbon fibre/PEEK composites under different cooling rates

Preparation of high-efficient donor-π-acceptor system with crystalline g-C3N4 as charge transfer module for enhanced photocatalytic hydrogen evolution

Donor-π-acceptor (D-π-A) type photocatalysts with g-C3N4 as π-module have attracted much attention due to their optimized conjugate structure and enhanced electron directed driving. However, the inefficient charges migration of g-C3N4 due to its amorphous or semi-crystalline structure and limitation of available functional groups are present challenges. In this work, the D-π-A type high crystalline carbon nitride (HCCN) has been obtained by in-situ introducing amide and cyanide groups into the high-crystallinity melon framework. The synergistic effect of functional group modification and crystallinity regulation greatly enhances the electron induction driving and charge carrier density. Moreover, the density functional theory calculations demonstrate that the D-π-A structure could induce the local charge distribution of melon units to provide a unique and stable pathway for photoinduced charges migration. The as-prepared HCCN sample shows a superior visible-light photocatalytic performance for hydrogen evolution with an apparent quantum efficiency (AQE) of 12.2 ​% at 420 ​± ​15 ​nm, which is 23.7 times higher than that of original g-C3N4. Finally, the charge separation and transfer processes as well as the possible photocatalytic reaction mechanisms of HCCN sample are also investigated.

Robust carbon nitride nanosheet interlayered thin-film nanocomposite membrane for enhanced organic solvent nanofiltration

The integration of a nanomaterial interlayer within a thin-film composite membrane can markedly enhance its performance in organic solvent nanofiltration (OSN). However, this enhancement often comes at the expense of membrane integrity due to differential swelling behaviors in diverse solvents. In this study, we present an interlayered thin film nanocomposite (TFNi) membrane that demonstrates both high permeance and robust stability, utilizing green, porous, and reactive crystalline carbon nitride (CCN) nanosheets as the functional interlayer. The results revealed that ascribed to the presence of the CCN interlayer, the membranes retained their rejection towards organic dyes even after 10 h of DMF exposure, while the organic solvent permeance was significantly improved by the DMF treatment. The methanol permeance of the CCN-TFNi-DMF membrane reached an impressive 8.77 L m−2 h−1 bar−1, sustaining stable performance throughout a 72 h test period under a pressure of 10 bar. We attributed this performance enhancement to the extra nanochannels introduced by the CCN nanosheets that bolstered the permeance of the TFNi membrane, as well as the formation of a stable polyamide film resulting from the reaction between the amino groups on the CCN nanosheet surface and trimesoyl chloride during the interfacial polymerization process. This work provides valuable insights into the development of structurally reinforced TFNi membranes with exceptional performance for OSN separation applications.

Improvement of LiFePO4 electrochemical performance by organic zinc source doping in combination with crystalline carbon layer capping

In this paper, LiFePO4 cathode materials are prepared by hydrothermal method and co-modified using the synergistic effect of doping and capping. We investigate the effects of Zn[Formula: see text] doping and DPHP capping layer on the crystalline, microstructure, and electrochemical properties of LFP cathode materials, and the results indicate that the discharge capacity of the co-modified cathode material with 5% Zn[Formula: see text] doped and 7% DPHP capping layer is 162.1 mAh ⋅ g[Formula: see text], and the rate of capacity retention is still as high as 98.5% after 200 times of discharging and charging.

Beneficiation of High Sulfur Tertiary Coal of Assam with Burkholderia sp. GR 8-02. An Eco-Friendly Approach Toward Clean Coal Production

The high sulfur content in North-East Indian coal is one of the primary challenges with using it as an energy source. Therefore, the present study uses Burkholderia sp. GR 8-02 to explore coal beneficiation from the Tipong mine (T20 and T60) in Assam (North-East India). Various particle size fractions (−125 to +210 µm, −210 to +250 µm, −250 to +297 µm, −297 to +400 µm and −400 to +500 µm) were treated and subjected to petrographic and chemical analysis, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Scanning Electron Microscope-Energy Dispersive Spectroscopy (SEM-EDS), Thermogravimetric analysis (TGA), and Raman spectral analysis. The results revealed a 39.04% and 32.43% reduction in total sulfur for T20 and T60 samples, respectively. The ash content decreased by 19.79% in the T20 coal sample and by 24.52% in the T60 coal samples, with a relative decrease in the mineral matter content of approximately 17.43%. Following beneficiation with Burkholderia sp. GR 8-02, the −125 to +250 µm coal fraction exhibited maximum ash removal. The T20 sample useful heating value increased from 8116 to 8203 kcal/kg and the T60 sample from 8060 to 8210 kcal/kg. X-ray diffraction and FTIR patterns showed mineral phases like quartz, kaolinite, and pyrite. The FTIR spectra indicated altered C-S, SO2, and C=O bonds. The thermal profile showed a 12.54% mass loss difference between untreated and treated coal samples, suggesting lower thermal stability post-treatment without affecting the useful heating value (UHV). The treated coal’s surface leaching and morphological structure changes were investigated using Scanning Electron Microscope-Energy Dispersive Spectroscopy (SEM-EDS) images. Raman analysis revealed increased carbon crystallinity and molecular structure in treated coal. This study offers an environmentally friendly and efficient approach to clean coal production.

Suppressing Nonradiative Recombination through Dielectric Screening of Defects in Crystalline Carbon Nitride for Enhanced Photocatalytic Activity.

Abundant defect-induced nonradiative recombination greatly reduces the charge separation efficiency in photocatalysts. Dielectric screening of defects has been proven to be an effective strategy to improve the charge separation efficiency; however, it has been rarely reported in photocatalysis. Here, a developed calcium poly(heptazine imide) (CaPHI) is utilized as a model photocatalyst to explore the dielectric screening of defects. Through embedding potassium ions in CaPHI, the dipole moment and polarity of the PHI structure are increased, thus enhancing the dielectric constant and enabling the dielectric screening of defects. In addition, compared to the original CaPHI, the optimized Ca/KPHI exhibits a 79.3% reduction in defect capture cross-section, and a decrease in the nonradiative recombination rate from 0.6224 to 0.1452 ns-1, thus achieving an apparent quantum efficiency of 51.4% for H2 production at 420 nm. This proposed dielectric screening strategy effectively addresses the issue of slow carrier transport and separation caused by defect-induced nonradiative recombination in photocatalysts.

Effect of nickle on cerium oxide support to develop cyclic catalytic methane decomposition followed by CO2 gasification

Catalytic methane decomposition (CMD) offers an eco-friendly method to produce COx-free hydrogen and solid carbon. An innovative approach for catalyst regeneration involves utilizing CO2 as a reactant to produce CO via the Reverse Boudouard Reaction, which serves as a valuable feedstock for various chemicals and fuels. This study aims to investigate the role and interaction of Ni nanoparticles on cerium oxide support by comparing two catalysts: one synthesized via the conventional impregnation method (Imp) and the other through solution combustion synthesis (SCS). Both catalysts containing the same Ni loading of 5 wt% and were tested under identical conditions. Comprehensive characterization techniques, including XRD, H2 and O2 TPR, TEM, SEM, XPS, and Raman spectroscopy, were employed to elucidate the observed performances. The SCS catalyst resulted in smaller Ni nanoparticles with stronger metal-support interaction. Observations revealed both tip and base carbon growth for the SCS catalyst, whereas the Imp catalyst predominantly characterized by tip growth. For the SCS catalyst, carbon nanofibers and nanotubes were observed, and both appeared active in carbon CO2 gasification. For the Imp catalyst, more crystalline carbon is observed. The amount of carbon produced was much more and managed to cover the entire catalyst. For SCS carbon coverage was partial. Two rates of CO2 gasification were observed depending on the extent of carbon coverage. Across all tested temperatures and space velocities, the catalyst prepared by impregnation exhibited higher reaction rates. The Imp catalyst demonstrated 15 % higher CMD and 29 % more generated carbon than SCS. This work demonstrated the critical role of key factors influencing the catalytic performance of this cyclic process. This includes the Ni nanoparticle size and distribution, the metal-support interaction's strength, and the graphitic carbon's nature.

Synergistic enhancement of lithium iron phosphate electrochemical performance by organic zinc source doping and crystalline carbon layer capping

In this study, lithium iron phosphate (LFP) is prepared as cathode material by hydrothermal synthesis method and the combined effect of doping and capping is applied to co-modify it. We thoroughly investigate how Zn2+ doping and PA capping layer affect the crystal structure, microscopic morphology, and electrochemical properties of LFP cathode materials. The experimental results show that when co-modified with 5 % Zn2+ doping combined with 7 % PA capping layer, the resulting cathode material exhibits a discharge specific capacity of 165.5 mAh g−1, and the capacity retention rate can still be maintained at a high level of 98.6 % after 200 charge–discharge cycles.

Gold nanoparticles decorated crystalline carbon nitride nano-walls as a SERS chip for rapid and sensitive detection of benzidine

Risk level of benzidine residue to the environment and food safety urges surface enhanced Raman scattering (SERS) substrates to develop with high sensitivity and rapid enrichment. Herein, a hybrid of Au NPs decorated crystalline carbon nitride nano-walls (Au/CCN NWs) is fabricated on Al sheet and employed as a SERS substrate for the first time. An electro-enhanced adsorption strategy is employed to endow as-prepared Au/CCN NWs/Al chip with rapid assay capability. Crystalline phase transition and nano-wall morphology respectively bestows high charge transfer efficiency and favorable enrichment activity upon Au/CCN NWs/Al chip, and the hybrid substrate owns a considerable enhancement factor of 1.76×106 under static adsorption mode. Moreover, Au/CCN NWs/Al substrate can achieve the saturation enrichment of benzidine in 120 s with the help of electro-enhanced adsorption, and gains a significantly enhanced signal response compared to static adsorption. Likewise, the highly sensitive response (1 μg L-1), superior reproducibility (RSD=9.11 %, n=100) and reliable accuracy (recovery rate of 95.55%-109.46%) jointly demonstrate that Au/CCN NWs/Al substrate may be applicable for detecting benzidine residue in actual application. This work offers an integrated solution to both enhance charge transfer efficiency and enrichment activity based on collaborative crystalline phase transition and electro-enhanced adsorption, and may inspire the design of novel noble metal/semiconductor hybrid SERS substrates.

Gas adsorption analysis for quantifying the edge sites of graphite

The edge plane exposed on the surface of carbon materials is the active site that determines their properties. When graphite is used as the negative electrode in lithium-ion batteries, the edge plane acts as an access point for lithium insertion/desorption. However, because of the low specific surface area and amorphous carbon coating of graphite particles, accurately estimating the number of edge planes is challenging. Therefore, we propose a technique for determining graphite edge planes based on the stepwise adsorption of Kr onto the hexagonal carbon network surface. Graphite particles with highly modified surface structures were prepared by controlling the particle size, heat treatment temperature, and amorphous carbon coating. Electrochemical evaluation revealed significant differences in charge-transfer resistance, an indicator of edge planes. The edge plane determination results obtained using conventional methods such as X-ray diffractometry and Raman spectroscopy did not correlate well with charge-transfer resistance. Meanwhile, Kr adsorption measurements revealed that the stepwise adsorption behavior, because of the interaction of Kr with the energetically homogenous surface, varied significantly depending on the surface properties of graphite particles. The number of edge planes estimated by gas adsorption strongly correlated with charge-transfer resistance. Consequently, we determined that the graphite edge plane tied to the electrochemical index can be derived using gas adsorption analysis. This edge plane determination technique would be applicable not only to graphite but also to highly crystalline carbon materials with an exposed hexagonal carbon network surface.

The long-term transformation of FeIII-AsV coprecipitates at room temperature under oxic conditions: New insights for the fate and the speciation of As

The long-term stability of FeIII-AsV coprecipitates, a typically hydrometallurgical or naturally produced As-bearing wastes in tailings or in other environments, is critical to evaluating the As risk caused by them. A wide pH range, different Fe/As molar ratios, reaction media, and neutralization reagents were considered in order to find the mechanisms controlling the fate of As during the 1640 days of transformation at 25 °C. The results indicated that at pH 4 and 12, As continuously released from the solid phase. The components and their proportions determined the fate of As at pH 4. However, at pH 12, crystalline calcium carbonates (CCA) formed due to the CO2 in the air and this combined with the adsorption capacity of As on the 2-line ferrihydrite controlling the fate of As. If pH changed to 8 and 10, yukonite formed after the release of As. The CCA also appeared in the presence of Ca. Therefore, these two processes controlled the fate of As at this pH range. These findings are important for understanding and predicting the transport of As under various environmental conditions. The technology chosen for As remediation in soils and As removal from waste waters will also be benefit from these results.

Synthesis and characterization of fluorescent carbon dots obtained from citrus x sinensis by an eco-friendly method

The synthesis and characterization of fluorescent carbon dots (CDs) obtained by an environmentally friendly method through carbonization, fragmentation and centrifugation of orange peel (citrus x sinensis) are reported. By thermogravimetry, 4 degradation regions associated with hemicellulose, lignin and organic matter were found. The SEM micrograph shows a rough surface morphology with flakes and granulation due to the carbonization process. X-ray diffraction (XRD) shows a hexagonal crystalline structure associated with graphitic carbon, which was confirmed by Raman scatterings, Raman spectroscopy that presented two main vibrational bands, D and G, associated with active defects in the graphitic carbon crystalline structure. The Transmission electron microscopy (TEM) micrograph showed CDs of size 33.65 ± 0.68n, and with High-Resolution TEM (HRTEM) an interplanar distance of 0.213 nm in the direction of the crystal planes (100) of graphitic carbon was obtained, which were confirmed by XRD and Raman spectroscopy. X-ray photoelectron spectroscopy revealed the relative atomic composition and identified the strongest photoelectron transitions of carbon, sp2 (286 eV) and sp3 (285 eV), in graphitic carbon. Ultraviolet–visible (UV–Vis) spectroscopy of the CDs obtained from fragmentation graphitic carbon showed a band at 205 nm associated with CC bonds π-π* of CC and n-π*, as well as two bands at 276 and 328 nm associated with bond transitions. The Fourier Transform Infrared (FTIR) spectrum showed bands associated with CHs bonds as well as CC, CN bonds of the CDs. Fluorescence spectroscopy showed three emission bands at 2.43, 2.54 and 2.87 eV. The CDs showed the emission of the characteristic blue colour.

Synergistic effects of CO2 mixing and CO2 curing in CO2 uptake capacity of Portland cement

This study investigates the synergistic effects of CO2 mixing and CO2 curing on the CO2 uptake capacity of Portland cement. After a normal mixing or ten minutes of CO2 mixing, samples underwent 0.5, 1, or 3 days of CO2 curing at a 10 % CO2 concentration. Hydration and carbonation characteristics were assessed by means of a thermogravimetry analysis, reacted water and CO2 uptake measurements, pore solution analysis, X-ray diffractometry, and Rietveld-refinement-based quantification. The CO2-mixed samples displayed an escalating trend in terms of CO2 uptake with longer curing times and greater reaction degrees compared to normally mixed samples. In addition, extended CO2 curing durations resulted in decreased levels of portlandite and increased amounts of crystalline carbonates, alongside a reduction in the ratio of amorphous to crystalline carbonates. Subsequently, improvements in the compressive strength were noted with longer CO2 curing durations.

Revealing the effect regularity of cations on electron storage capacity of poly(heptazine imide) in “dark photocatalysis”

As a crystalline carbon nitride material, poly(heptazine imide) (abbreviated as PHI) exhibits higher photoinduced charge separation performance than traditional melon-based carbon nitride. The excellent charge separation is mainly attributed to the fact that the photoinduced electrons can be captured by cations (such as K+ and H+) and further stored in the PHI framework with the presence of sacrificial agents (such as methanol). Due to this special property, the stored electrons can be used for delayed H2O2 or H2 production in the “dark photocatalysis” field. Nevertheless, the effect regularity of cations on the electron storage capacity of PHI is still not clear. In this work, this problem has been preliminarily revealed. The electron storage capacity of a series of PHI materials has been quantified by the H2O2 production test in dark conditions. The result indicates that the electron storage capacity of PHI samples shows a volcano curve with the alkali metal ion content. Based on experimental tests and theoretical simulations, it is concluded that the electron storage capacity of PHI is related to the conductivity of the cation and its binding force for photogenerated electrons.

Oxygen isotope fractionation during amorphous to crystalline calcium carbonate transformation at varying relative humidity and temperature

Crystalline calcium carbonate isotope compositions have been widely used to reconstruct past environments. However, if their isotopic compositions are modified because of crystallization from an amorphous precursor, their reliability as paleo-geochemical proxies can be compromised. This study explored the changes in the oxygen isotope compositions during the transformation of amorphous calcium carbonate (ACC) into crystalline carbonate under different conditions of relative humidity (RH of 33–95 %), temperature (T of 5 °C and 20 °C) and in the presence/absence of atmospheric CO2. The data showed that at low RH and T (e.g., RH ≤ 45 % and 5 °C) when a complete ACC-crystalline carbonate transformation did not take place then the original ACC δ18O values (δ18OCaCO3 = −15.9 ± 1.0 ‰, VPDB) were preserved throughout the experimental runtime (up to 144 days). In contrast, in fully crystallized CaCO3 (e.g., at RH ≥ 60 %) the δ18OCaCO3 values increased rapidly over the first few days, followed by a slower and gradual increase. By the end of the experiments (i.e., after 103–144 days) the crystalline δ18OCaCO3 values ranged from −10.4 ‰ to −8.1 ‰ in the presence of atmospheric CO2 and from −12.6 ‰ to −9.5 ‰ in the CO2-free experiments. These changes in oxygen isotope compositions of the CaCO3 reaction products (calcite and/or vaterite) were mainly driven by exchange with H2O from the hydrated ACC i.e. the synthesis fluid. In CO2-present experiments, oxygen isotope fractionation factors between the CaCO3 reaction products and the synthesis fluid (18αc–w) approached or exceeded oxygen isotope equilibrium values. This could be explained by a decrease in the initially high pH of the aqueous fluid released from ACC dissolution during CO2 hydration/hydroxylation, which would have increased the oxygen isotope exchange kinetics between H2O and dissolved inorganic carbon (DIC). In some experiments, the hydration/hydroxylation of 18O-enriched CO2, due to isotopic salt-effects, might have also resulted in 18O-enriched calcium carbonates and calculated fractionation factors that exceeded equilibrium values. In the CO2-free experiments, isotopic equilibrium between the crystalline phase and the synthesis fluid was not reached. This oxygen isotope disequilibrium suggests that without the pH lowering effect of the hydroxylation/hydration of CO2, the CO32− released during ACC/calcite dissolution-reprecipitation may have not isotopically equilibrated with the high pH synthesis fluid due to the long equilibration times required to reach isotope equilibrium at high pH values, leading to the self-buffering of δ18OCaCO3 values. The results suggest that the oxygen isotopic compositions of natural carbonates formed from ACC transformation in air and at low water/solid ratio (e.g., biominerals or carbonates formed in caves) are complex and cannot be used as simple proxies if the reaction kinetics (RH/CO2/T) and H2O sources are not known and quantified.

Syngenetic effects in co-activation of willow wood with homogenous biochar facilitate pore generation in activation

Mixing feedstocks of varied aromatic/aliphatic content is a simple method for tailoring pore structures of activated carbon (AC) in activation. Herein, willow wood and homogenous biochar produced at 300 or 500°C, which have distinct content of aliphatic component, were co-activated with K2C2O4, at 800°C for changing pore characteristics of resulting AC. The results indicated that co-activation of willow and biochar diminished production of AC and impacted evolution of organics and gases through intensive volatiles-char interactions. The AC from the co-activation of willow with either biochar-300 or biochar-500 exhibited higher specific surface area than that from direct activation of willow (1409.7 or 1297.0 m2 g−1 versus 1243.6 m2 g−1), which was also higher than calculated average of that from feedstock (ca. 1160 m2 g−1). This resulted from intensified gasification of the biochar with H2O/CO2 derived from willow, creating additional macropores and micropores of enlarged pore sizes. The enhanced gasification also reduced crystallinity of graphitic carbon, lowered O content via accelerated deoxygenation and diminished CO on nascent AC. Volatiles-char interactions also minimized pore filling from carbonaceous deposit generated from secondary condensation of primary volatiles. Additionally, direct activation of aliphatic-rich willow tended to form more micropores, while more mesopores were formed from aromatic-rich biochar.

Synergy of P doping and crystallinity modulation in carbon nitride for enhancing photocatalytic uranyl reduction

Doping modification is a useful way to promote the catalytic activity of carbon nitride (CN). However, most doped CNs have lower structural symmetry and several edge defects, which hinder the transfer of charge carriers. This work reports a P-doped crystalline carbon nitride (crystalline PCN) for the efficient photoreduction of uranyl. The thermal polymerization and salt post-treatment convert the amorphous PCN into crystalline PCN. Compared to the pristine CN, the crystalline PCN has over 1620 % higher activity for uranyl (U(VI)) reduction, reaching a 97.8 % reduction rate in 60 min. Furthermore, the 2-PCN shows excellent stability and a U(VI) removal efficiency >85.7 % in the pH range of 5–8. Characterization analysis reveal that both the P doping and crystalline modulation do not obviously change their morphology, light absorption property and energy band structure, but markedly promote the delocalization of electrons around the doped P atoms, thereby severely inhibit direct electron-hole recombination. Thus, the more efficient separation of charge carriers generates more reactive specials to participate in the photocatalytic uranyl reduction reaction. This study demonstrates a dual-modification strategy for the rational synthesis of highly active metal-free CN-based photocatalysts for uranyl reduction.

Surface nitrogen defect modified crystalline carbon nitride spheres with boosted carrier dynamics for efficient solar hydrogen production

Engineering of the defective structure and crystallinity of semiconductor photocatalysts to promote carrier dynamics has attracted considerable attention. This study presents the design of surface nitrogen defect modified crystalline carbon nitride spheres (QCN) with synergistically boosted surface and bulk carrier separation through a rapid thermal treatment coupled with a flux assisted strategy. Using supramolecular self-assembled polymer as the precursor, spherical crystalline CN heterojunctions are firstly prepared by a molten salt method to improve the separation of bulk carriers. Abundant nitrogen defects are then introduced onto the surface of crystalline CN through the following quick thermal treatment in air, which can generate a higher exciton density and drive rapid migration of surface carriers by acting as effective electron sinks. Furthermore, the defect level also improves the visible light utilization and provides more active centers for reactant adsorption and activation. As a result, QCN samples exhibit excellent performance in photocatalytic hydrogen evolution, with an optimal hydrogen production rate 4.3 times higher than that of pristine bulk CN under visible light irradiation. Moreover, the photocatalytic activities of QCN are dependent on the concentration of nitrogen defects, which can be flexibly adjusted via thermal treatment temperature. Such a two-step regulation strategy combining the distinctive advantages of surface defect structure and high crystallinity is beneficial for synergistic enhancement of photocatalytic performance, and provides new insights for sustainable energy production in the future.

Plasmonic Pt-PPCN/TiN Ohmic Junction for Photo-Thermo Catalytic Hydrogen Production.

The rational design of photocatalysts for improving the conversion of solar energy into hydrogen is a promising route for achieving carbon neutrality. Herein, we couple plasmonic titanium nitride (TiN) with highly crystalline potassium-doped polymeric carbon nitride (PPCN) to construct a PPCN/TiN ohmic junction. Such an ohmic junction not only broadens the absorption spectrum but also inhibits the recombination of electrons and holes. In addition, Pt nanoparticles are introduced into this ohmic junction to form plasmonic Pt-PPCN/TiN, improving the capture of hot electrons generated by TiN and thereby promoting the dissociation of the O-H bond in H2O. The energy barrier decreases from 0.7 to 0.2 eV. Enhanced separation of carrier, activation of water molecules, and capture of hot electrons are jointly promoting photo-thermo catalytic hydrogen production. Therefore, under full-spectrum irradiation, the hydrogen production rate of Pt-PPCN/TiN reaches 19 085 μmol g-1 h-1. This novel plasmonic photocatalyst is promising for full-spectrum photo-thermo catalytic hydrogen production.