DNA Crystal Structures Research Articles

Synthesize, structural inspection, stoichiometry in solution and DFT calculation of some novel mixed ligand complexes: DNA binding, biomedical applications and molecular docking approach

Mixed ligand chelates of Pd(II), Cu(II), VO(II), and Ag(I) with (BIP = 4,6-dimethyl-N-(octahydro-2H-benzimidazol-2-ylidene)pyrimidin-2-amine) as a main ligand and (Phen = 1, 10-phenanthroline) as a second ligand were synthesized. The recently prepared chelates were investigated through CHN analysis, (NMR, Ft-IR, Mass, and UV–Vis) spectra, magnetic moments, molar conductance, TGA, Job s methods and DFT study. The (CHN and Mass) analysis, result expose the formation of structures (1 M: 1BIP: 1Phen) chelates. The two studied ligands are established to perform in as a neutral bi-dentate approach, concluded four N2 atoms for two ligands. The study of the molar conductance indicated the non-electrolytic features for (Cu(II) and VO(II)) chelates and the electrolytic features for (Ag(I) and Pd(II)) chelates. Thermo-dynamic and Kinetics factors for various thermal degradation phases were calculated. B3LYP/LANL2DZ/6–311 g(d,p) theoretical study has been applied for estimating the MEP, FMO analysis and quantum chemical reactivity descriptors of studied molecules. Practical and computational detail reveals that BIPPCu and BIPPVO complexes possess octahedral geometry around the metal center, BIPPAg complex shows a tetrahedral configuration, and BIPPPd complex has distorted square planar geometry. In vitro anti-microbial and anti-cancer for the studied structures were applied against various strains of microbes and cancer cell lines. The results revealed that all tested chelates showed a higher activity than the free BIP. The tested complexes have been studied to antioxidant potential using DPPH study. The binding of tested chelates with DNA was studied through applying electronic absorption, gel electrophoresis as well as viscosity study, in addition to the intercalating, minor groove and electrostatic approach of DNA interacting were recommended. The studied compounds explained dynamic satisfying performing. Also, the crystal structures of DNA (PDB ID: 454D), human coronavirus Nl63 nucleocapsid protein (PDB ID: 5EPW), breast cancer protein (PDB ID: 3HB5), and Escherichia coli (PDB ID: 2VF5) was performed by molecular docking simulation. Data of docking simulation suggestions are which tested compounds have biological behavior as well as have obvious benefit in the pharmaceutical business.

Programming crystallization kinetics of self-assembled DNA crystals with 5-methylcytosine modification

Self-assembled DNA crystals offer a precise chemical platform at the ångström-scale for DNA nanotechnology, holding enormous potential in material separation, catalysis, and DNA data storage. However, accurately controlling the crystallization kinetics of such DNA crystals remains challenging. Herein, we found that atomic-level 5-methylcytosine (5mC) modification can regulate the crystallization kinetics of DNA crystal by tuning the hybridization rates of DNA motifs. We discovered that by manipulating the axial and combination of 5mC modification on the sticky ends of DNA tensegrity triangle motifs, we can obtain a series of DNA crystals with controllable morphological features. Through DNA-PAINT and FRET-labeled DNA strand displacement experiments, we elucidate that atomic-level 5mC modification enhances the affinity constant of DNA hybridization at both the single-molecule and macroscopic scales. This enhancement can be harnessed for kinetic-driven control of the preferential growth direction of DNA crystals. The 5mC modification strategy can overcome the limitations of DNA sequence design imposed by limited nucleobase numbers in various DNA hybridization reactions. This strategy provides a new avenue for the manipulation of DNA crystal structure, valuable for the advancement of DNA and biomacromolecular crystallography.

Three-Dimensional Modeling of CpG DNA Binding with Matrix Lumican Shows Leucine-Rich Repeat Motif Involvement as in TLR9-CpG DNA Interactions.

Lumican is an extracellular matrix proteoglycan known to regulate toll-like receptor (TLR) signaling in innate immune cells. In experimental settings, lumican suppresses TLR9 signaling by binding to and sequestering its synthetic ligand, CpG-DNA, in non-signal permissive endosomes. However, the molecular details of lumican interactions with CpG-DNA are obscure. Here, the 3-D structure of the 22 base-long CpG-DNA (CpG ODN_2395) bound to lumican or TLR9 were modeled using homology modeling and docking methods. Some of the TLR9-CpG ODN_2395 features predicted by our model are consistent with the previously reported TLR9-CpG DNA crystal structure, substantiating our current analysis. Our modeling indicated a smaller buried surface area for lumican-CpG ODN_2395 (1803 Å2) compared to that of TLR9-CpG ODN_2395 (2094 Å2), implying a potentially lower binding strength for lumican and CpG-DNA than TLR9 and CpG-DNA. The docking analysis identified 32 amino acids in lumican LRR1-11 interacting with CpG ODN_2395, primarily through hydrogen bonding, salt-bridges, and hydrophobic interactions. Our study provides molecular insights into lumican and CpG-DNA interactions that may lead to molecular targets for modulating TLR9-mediated inflammation and autoimmunity.

Revisiting DNA Sequence-Dependent Deformability in High-Resolution Structures: Effects of Flanking Base Pairs on Dinucleotide Morphology and Global Chain Configuration.

DNA carries more than the list of biochemical ingredients that drive the basic functions of living systems. The sequence of base pairs includes a multitude of structural and energetic signals, which determine the degree to which the long, threadlike molecule moves and how it responds to proteins and other molecules that control its processing and govern its packaging. The chemical composition of base pairs directs the spatial disposition and fluctuations of successive residues. The observed arrangements of these moieties in high-resolution protein–DNA crystal structures provide one of the best available estimates of the natural, sequence-dependent structure and deformability of the double-helical molecule. Here, we update the set of knowledge-based elastic potentials designed to describe the observed equilibrium structures and configurational fluctuations of the ten unique base-pair steps. The large number of currently available structures makes it possible to characterize the configurational preferences of the DNA base-pair steps within the context of their immediate neighbors, i.e., tetrameric context. Use of these knowledge-based potentials shows promise in accounting for known effects of sequence in long chain molecules, e.g., the degree of curvature reported in classic gel mobility studies and the recently reported sequence-dependent responses of supercoiled minicircles to nuclease cleavage.

Synthesis, Spectroscopic, Structural and Molecular Docking Studies of Some New Nano-Sized Ferrocene-Based Imine Chelates as Antimicrobial and Anticancer Agents.

The newly synthesized organometallic acetyl ferrocene imine ligand (HL) was obtained by the direct combination of 2-acetyl ferrocene with 2-aminothiophenol. The electronic and molecular structure of acetyl ferrocene imine ligand (HL) was refined theoretically and the chemical quantum factors were computed. Complexes of the acetyl ferrocene imine ligand with metal(II)/(III) ions (Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)) were fabricated. They were inspected by thermal (DTG/TG), spectroscopic techniques (FT-IR, 1H NMR, mass, UV–Vis), molar conductivity, and CHNClM to explicate their structures. Studies using scanning electron microscope (SEM) were conducted on the free acetyl ferrocene imine ligand and its Cd(II) chelate to confirm their nano-structure. To collect an idea about the effect of metal ions on anti-pathogenic properties upon chelation, the newly synthesized acetyl ferrocene imine ligand and some of its metal chelates were tested against a variety of microorganisms, including Bacillus subtilis, Staphylococcus aureus, Salmonella typhimurium, Escherichia coli, Aspergillus fumigatus, and Candida albicans. The ligand and its metal chelate were tested for cytotoxic activity in human cancer (MCF-7 cell viability) and human melanocyte cell line HBF4. It was discovered that the Cd(II) chelate had the lowest IC50 of the three and thus had the prior activity. Molecular docking was utilized to investigate the interaction of acetyl ferrocene imine ligand (HL) with the receptors of the vascular endothelial growth factor receptor VEGFR (PDB ID: 1Y6a), human Topo IIA-bound G-segment DNA crystal structure (PDB ID: 2RGR), and Escherichia coli crystal structure (PDB ID: 3T88).

Racemic crystal structures of A-DNA duplexes.

The ease with which racemic mixtures crystallize compared with the equivalent chiral systems is routinely taken advantage of to produce crystals of small molecules. However, biological macromolecules such as DNA and proteins are naturally chiral, and thus the limited range of chiral space groups available hampers the crystallization of such molecules. Inspiring work over the past 15 years has shown that racemic mixtures of proteins, which were made possible by impressive advances in protein chemical synthesis, can indeed improve the success rate of protein crystallization experiments. More recently, the racemic crystallization approach was extended to include nucleic acids as a possible aid in the determination of enantiopure DNA crystal structures. Here, findings are reported that suggest that the benefits may extend beyond this. Two racemic crystal structures of the DNA sequence d(CCCGGG) are described which were found to fold into A-form DNA. This form differs from the Z-form DNA conformation adopted by the chiral equivalent in the solid state, suggesting that the use of racemates may also favour the emergence of new conformations. Importantly, the racemic mixture forms interactions in the solid state that differ from the chiral equivalent (including the formation of racemic pseudo-helices), suggesting that the use of racemic DNA mixtures could provide new possibilities for the design of precise self-assembled nanomaterials and nanostructures.

A machine learning model to predict quantum-accurate electron densities for DNA: applications for X-ray crystal structure refinement

We developed a machine learning model based on a Euclidean neural network framework to study large biological macromolecules such as DNA. The machine learning model bypasses computationally demanding quantum simulations to predict electron densities of up to 99% accuracy. We show that the machine learning model extrapolates to larger system sizes with negligible loss of accuracy by comparing model predictions to quantum calculations for DNA structures of increasing chain length. We apply the model to produce electron densities for various experimental DNA crystal structures typically considered to be too large for conventional calculations.

High-Resolution Mapping of Amino Acid Residues in DNA-Protein Cross-Links Enabled by Ribonucleotide-Containing DNA.

DNA-protein cross-links have broad applications in mapping DNA-protein interactions and provide structural insights into macromolecular structures. However, high-resolution mapping of DNA-interacting amino acid residues with tandem mass spectrometry remains challenging due to difficulties in sample preparation and data analysis. Herein, we developed a method for identifying cross-linking amino residues in DNA-protein cross-links at single amino acid resolution. We leveraged the alkaline lability of ribonucleotides and designed ribonucleotide-containing DNA to produce structurally defined nucleic acid-peptide cross-links under our optimized ribonucleotide cleavage conditions. The structurally defined oligonucleotide-peptide heteroconjugates improved ionization, reduced the database search space, and facilitated the identification of cross-linking residues in peptides. We applied the workflow to identifying abasic (AP) site-interacting residues in human mitochondrial transcription factor A (TFAM)-DNA cross-links. With sub-nmol sample input, we obtained high-quality fragmentation spectra for nucleic acid-peptide cross-links and identified 14 cross-linked lysine residues with the home-built AP_CrosslinkFinder program. Semi-quantification based on integrated peak areas revealed that K186 of TFAM is the major cross-linking residue, consistent with K186 being the closest (to the AP modification) lysine residue in solved TFAM:DNA crystal structures. Additional cross-linking lysine residues (K69, K76, K136, K154) support the dynamic characteristics of TFAM:DNA complexes. Overall, our combined workflow using ribonucleotide as a chemically cleavable DNA modification together with optimized sample preparation and data analysis offers a simple yet powerful approach for mapping cross-linking sites in DNA-protein cross-links. The method is amendable to other chemical or photo-cross-linking systems and can be extended to complex biological samples.

Targeting the ALS/FTD-associated A-DNA kink with anthracene-based metal complex causes DNA backbone straightening and groove contraction.

The use of a small molecule compound to reduce toxic repeat RNA transcripts or their translated aberrant proteins to target repeat-expanded RNA/DNA with a G4C2 motif is a promising strategy to treat C9orf72-linked disorders. In this study, the crystal structures of DNA and RNA–DNA hybrid duplexes with the -GGGCCG- region as a G4C2 repeat motif were solved. Unusual groove widening and sharper bending of the G4C2 DNA duplex A-DNA conformation with B-form characteristics inside was observed. The G4C2 RNA–DNA hybrid duplex adopts a more typical rigid A form structure. Detailed structural analysis revealed that the G4C2 repeat motif of the DNA duplex exhibits a hydration shell and greater flexibility and serves as a ‘hot-spot’ for binding of the anthracene-based nickel complex, NiII(Chro)2 (Chro = Chromomycin A3). In addition to the original GGCC recognition site, NiII(Chro)2 has extended specificity and binds the flanked G:C base pairs of the GGCC core, resulting in minor groove contraction and straightening of the DNA backbone. We have also shown that Chro-metal complexes inhibit neuronal toxicity and suppresses locomotor deficits in a Drosophila model of C9orf72-associated ALS. The approach represents a new direction for drug discovery against ALS and FTD diseases by targeting G4C2 repeat motif DNA.

Three-Dimensional Structure of RNA Monomeric G-Quadruplex Containing ALS and FTD Related G4C2 Repeat and Its Binding with TMPyP4 Probed by Homology Modeling based on Experimental Constraints and Molecular Dynamics Simulations.

The G-quadruplex-forming hexanucleotide repeat expansion (HRE), d(G4C2)n, within the human C9orf72 gene is the root cause for familial amyotrophic lateral sclerosis-frontotemporal dementia (ALS-FTD). A recent study has shown that TMPyP4 has good potential to work as a RNA G-quadruplex binder in treating ALS and FTD. Although the high-resolution structure of the monomeric DNA antiparallel G-quadruplex form of the monomeric hexanucleotide repeat was recently solved, the RNA parallel G-quadruplex structure and its complex with TMPyP4 are not available yet. In this study, we first constructed the homology model for the parallel monomeric RNA G-quadruplex of r(G4C2)3G4 based on experimental constraints and the parallel monomeric G-quadruplex DNA crystal structure. Although the G-tetra core of the homology model was stable observed in 15 μs molecular dynamics (MD) simulations, we observed that the loops adopt additional conformations besides the initial crystal conformation, where TMPyP4 binding was found to reduce the loop fluctuation of the RNA monomeric G-quadruplex. Next, we probed the elusive binding behavior of TMPyP4 to the RNA monomeric G-quadruplex. Encouragingly, the binding modes observed are similar to the modes observed in two experimental complexes of a parallel DNA G-quadruplex with TMPyP4. We also constructed a Markov state model to provide insights into the binding pathways. Together, the findings from our study may assist future development of G-quadruplex-specific ligands in the treatment of neurodegenerative diseases like ALS and FTD.

Modeling antimalarial and antihuman African trypanosomiasis compounds: a ligand- and structure-based approaches.

This study examines the interaction of 137 antimalarial and antihuman African trypanosomiasis compounds [bis(2-aminoimidazolines), bisguanidinediphenyls and polyamines] on three different in vitro assays (Trypanosoma brucei rhodesiense (T.b.r.), Plasmodium falciparum (P.f.) and cytotoxicity-L6 cells). ΔTm values, wherever available, were also examined for the considered ligands. Eight DNA-ligand complexes and one DNA structure without ligand were selected from protein data bank (PDB) based on the structural similarity. Geometry optimization of all the considered ligands was carried out at the B3LYP/6-31G(d) level of theory. The AutoDock4 tool was utilized for the docking of these molecules at the minor groove of nine selected DNA crystal structures. We observed DT20, DA6, DT8 and DT19 residues generally interact with most of the considered ligands. Molecular dynamics simulations, molecular mechanics-generalized born surface area and molecular mechanics-Poisson Boltzmann surface area calculations indicate that the docked poses are generally stable and docked ligands do not show much deviation in the minor groove of DNA until 10ns simulation. Efficient and statistically significant quantitative structure-activity relationship models for T.b.r., P.f., C-L6 and ΔTm values were developed. All the generated models are internally and externally validated. We predicted a few ligands with significant IC50 values against P.f. based on the developed models. These results may help to design new and potent antimalarial and antihuman African trypanosomal compounds.

Utilizing guanine-coordinated Zn2+ ions to determine DNA crystal structures by single-wavelength anomalous diffraction.

The experimental phase determination of crystal structures of nucleic acids and nucleic acid-ligand complexes would benefit from a facile method. Even for double-stranded DNA, software-generated models are generally insufficiently accurate to serve as molecular replacement search models, necessitating experimental phasing. Here, it is demonstrated that Zn2+ ions coordinated to the N7 atom of guanine bases generate sufficient anomalous signal for single-wavelength anomalous diffraction (SAD) phasing of DNA crystal structures. Using zinc SAD, three crystal structures of double-stranded DNA oligomers, 5'-AGGGATCCCT-3', 5'-GGGATCCC-3' and 5'-GAGGCCTC-3', were determined. By determining the crystal structure of one of these oligomers, GAGGCCTC, in the presence of Mg2+ instead of Zn2+, it was demonstrated that Zn2+ is not structurally perturbing. These structures allowed the analysis of structural changes in the DNA on the binding of analogues of the natural product mithramycin to two of these oligomers, AGGGATCCCT and GAGGCCTC. Zinc SAD may become a routine approach for determining the crystal structures of nucleic acids and their complexes with small molecules.

Self-Assembly of a 3D DNA Crystal Structure with Rationally Designed Six-Fold Symmetry.

Programming self-assembled designer DNA crystals with various lattices and functions is one of the most important goals for nanofabrication using nucleic acids. The resulting porous materials possess atomic precision for several potential applications that rely on crystalline lattices and cavities. Herein, we present a rationally designed and self-assembled 3D DNA crystal lattice with hexagonal symmetry. In our design, two 21-base oligonucleotides are used to form a duplex motif that further assembles into a 3D array. The interactions between the strands are programmed using Watson-Crick base-pairing. The six-fold symmetry, as well as the chirality, is directed by the Holliday junctions formed between the duplex motifs. The rationally designed DNA crystal provides a new avenue that could create self-assembled macromolecular 3D crystalline lattices with atomic precision. In addition, the structure contains a highly organized array of well-defined cavities that are suitable for future applications with immobilized guests.

Self‐Assembly of a 3D DNA Crystal Structure with Rationally Designed Six‐Fold Symmetry

Programming self-assembled designer DNA crystals with various lattices and functions is one of the most important goals for nanofabrication using nucleic acids. The resulting porous materials possess atomic precision for several potential applications that rely on crystalline lattices and cavities. Herein, we present a rationally designed and self-assembled 3D DNA crystal lattice with hexagonal symmetry. In our design, two 21-base oligonucleotides are used to form a duplex motif that further assembles into a 3D array. The interactions between the strands are programmed using Watson–Crick base-pairing. The six-fold symmetry, as well as the chirality, is directed by the Holliday junctions formed between the duplex motifs. The rationally designed DNA crystal provides a new avenue that could create self-assembled macromolecular 3D crystalline lattices with atomic precision. In addition, the structure contains a highly organized array of well-defined cavities that are suitable for future applications with immobilized guests.

Mismodeled purines: implicit alternates and hidden Hoogsteens.

Hoogsteen base pairs are seen in DNA crystal structures, but only rarely. This study tests whether Hoogsteens or other syn purines are either under-modeled or over-modeled, which are known problems for rare conformations. Candidate purines needing a syn/anti 180° flip were identified by diagnostic patterns of difference electron-density peaks. Manual inspection narrowed 105 flip candidates to 20 convincing cases, all at ≤2.7 Å resolution. Rebuilding and refinement confirmed that 14 of these were authentic purine flips. Seven examples are modeled as Watson-Crick base pairs but should be Hoogsteens (commonest at duplex termini), and three had the opposite issue. Syn/anti flips were also needed for some single-stranded purines. Five of the 20 convincing cases arose from an unmodeled alternate duplex running in the opposite direction. These are in semi-palindromic DNA sequences bound by a homodimeric protein and show flipped-purine-like difference peaks at residues where the palindrome is imperfect. This study documents types of incorrect modeling which are worth avoiding. However, the primary conclusions are that such mistakes are infrequent, the bias towards fitting anti purines is very slight, and the occurrence rate of Hoogsteen base pairs in DNA crystal structures remains unchanged from earlier estimates at ∼0.3%.

DNA conformational transitions inferred from re-evaluation of m|Fo| - D|Fc| electron-density maps.

Conformational flexibility of DNA plays important roles in biological processes such as transcriptional regulation and DNA packaging etc. To understand the mechanisms of these processes, it is important to analyse when, where and how DNA shows conformational variations. Recent analyses have indicated that conventional refinement methods do not always provide accurate models of crystallographic heterogeneities and that some information on polymorphism has been overlooked in previous crystallographic studies. In the present study, the m|Fo| - D|Fc| electron-density maps of double-helical DNA crystal structures were calculated at a resolution equal to or better than 1.5 Å and potential conformational transitions were found in 27% of DNA phosphates. Detailed analyses of the m|Fo| - D|Fc| peaks indicated that some of these unassigned densities correspond to ZI ↔ ZII or A/B → BI conformational transitions. A relationship was also found between ZI/ZII transitions and metal coordination in Z-DNA from the detected peaks. The present study highlights that frequent transitions of phosphate backbones occur even in crystals and that some of these transitions are affected by the local molecular environment.

Toward an Expanded Genome: Structural and Computational Characterization of an Artificially Expanded Genetic Information System.

Although the fundamental properties of DNA as first proposed by Watson and Crick in 1953 provided a basic understanding of how duplex DNA was organized and might be replicated, it was not until the first crystal structures of DNA (Z-DNA in 1979, B-DNA in 1980, and A-DNA in 1982) that the true complexity of the molecule began to be appreciated. Many crystal structures of oligonucleotides have since shed light on the helical forms that "Watson-Crick" DNA can adopt, their associated groove widths, and the properties of the nucleobase pairs and their interactions in all three helical forms. Additional understanding of the properties of Watson-Crick DNA has been provided by computational studies employing a variety of theoretical methods. Together with these studies devoted to understanding Watson-Crick DNA, recent efforts to expand the genetic alphabet have founded a new field in synthetic biology. One of these efforts, the artificially expanded genetic information system (AEGIS) developed by Steven Benner and co-workers, takes advantage of orthogonal hydrogen bonding to produce DNA comprised of six nucleobase pairs, of which the most extensively studied is referred to as P:Z with P being 2-amino-imidazo[1,2-a]-1,3,5-triazin-4(8H)-one) and Z being 6-amino-5-nitro-2(1H)-pyridone. P:Z forms three edge-on hydrogen bonds that differ from standard Watson-Crick pairs in the arrangement of acceptors and donor groups; P presents acceptor, acceptor, donor, and Z presents donor, donor, acceptor. Z is unique among the AEGIS nucleobases in having a nitro group present in the major groove. PZ-containing DNA has been exploited in a number of clinical applications and is being used to develop receptors and catalysts. Ultimately, the grand challenge will be to create a semisynthetic organism with an expanded genome. Furthermore, just as our understanding of the properties of natural DNA have benefited from structural and computational characterization, so too will our understanding of artificial DNA. This Account focuses on the structural and biophysical properties of AEGIS DNA containing P:Z pairs. We begin with the fundamental properties of P:Z nucleobase pairs, including their electrostatic potential and hydrogen-bonding energies, as elucidated by quantum mechanical calculations. We then examine the impact of including multiple consecutive P:Z pairs into duplex DNA providing an opportunity to investigate stacking interactions between P:Z pairs. The self-complementary 5'-CTTATPPTAZZATAAG was crystallized in B-form using the host-guest system along with analogous natural sequences including Gs or As. Use of the host-guest system to characterize B-DNA obviates a number of limitations on the structural characterization of sequences of interest; these include the ability to crystallize the desired sequences and to distinguish structural effects imparted by the lattice constraints from those inherent in the sequence itself. On the other hand, 3/6ZP, 5'-CTTATPPPZZZATAAG, was crystallized in A-form in a DNA-only lattice allowing a comparative analysis of P:Z pairs in two of the biologically relevant helical forms: A- and B-DNA. Computational studies on the 3/6ZP sequence starting in A-form provide additional evidence for a more energetically favorable stacking interaction, which we term the "slide" conformer, observed in the A-form crystal structure; this unusual stacking interaction plays a major role in altering the conformational dynamics observed for the PZ-containing duplex as compared to a GC-containing "control" duplex in long time scale molecular dynamics simulations. This combined use of structural and computational strategies paves the way for obtaining a detailed description of artificial DNA, both in how it differs from Watson-Crick DNA and in the rational discovery of proteins, such as endonucleases, transcription factors, and polymerases, which can specifically manipulate DNA containing AEGIS nucleobase pairs.

3D DNA Crystals and Nanotechnology

DNA’s molecular recognition properties have made it one of the most widely used biomacromolecular construction materials. The programmed assembly of DNA oligonucleotides has been used to create complex 2D and 3D self-assembled architectures and to guide the assembly of other molecules. The origins of DNA nanotechnology are rooted in the goal of assembling DNA molecules into designed periodic arrays, i.e., crystals. Here, we highlight several DNA crystal structures, the progress made in designing DNA crystals, and look at the current prospects and future directions of DNA crystals in nanotechnology.

Simple Elastic Network Models for Exhaustive Analysis of Long Double-Stranded DNA Dynamics with Sequence Geometry Dependence.

Simple elastic network models of DNA were developed to reveal the structure-dynamics relationships for several nucleotide sequences. First, we propose a simple all-atom elastic network model of DNA that can explain the profiles of temperature factors for several crystal structures of DNA. Second, we propose a coarse-grained elastic network model of DNA, where each nucleotide is described only by one node. This model could effectively reproduce the detailed dynamics obtained with the all-atom elastic network model according to the sequence-dependent geometry. Through normal-mode analysis for the coarse-grained elastic network model, we exhaustively analyzed the dynamic features of a large number of long DNA sequences, approximately ∼150 bp in length. These analyses revealed positive correlations between the nucleosome-forming abilities and the inter-strand fluctuation strength of double-stranded DNA for several DNA sequences.

An intercalation-locked parallel-stranded DNA tetraplex.

DNA has proved to be an excellent material for nanoscale construction because complementary DNA duplexes are programmable and structurally predictable. However, in the absence of Watson–Crick pairings, DNA can be structurally more diverse. Here, we describe the crystal structures of d(ACTCGGATGAT) and the brominated derivative, d(ACBrUCGGABrUGAT). These oligonucleotides form parallel-stranded duplexes with a crystallographically equivalent strand, resulting in the first examples of DNA crystal structures that contains four different symmetric homo base pairs. Two of the parallel-stranded duplexes are coaxially stacked in opposite directions and locked together to form a tetraplex through intercalation of the 5′-most A–A base pairs between adjacent G–G pairs in the partner duplex. The intercalation region is a new type of DNA tertiary structural motif with similarities to the i-motif. 1H–1H nuclear magnetic resonance and native gel electrophoresis confirmed the formation of a parallel-stranded duplex in solution. Finally, we modified specific nucleotide positions and added d(GAY) motifs to oligonucleotides and were readily able to obtain similar crystals. This suggests that this parallel-stranded DNA structure may be useful in the rational design of DNA crystals and nanostructures.