Concentrations Of Cryoprotective Agents Research Articles

Ultrastructural examination of cryodamage in Paracentrotus lividus eggs during cryopreservation

This study examinates the challenges of cryopreserving sea urchin (Paracentrotus lividus) eggs, a task hindered by factors like low membrane permeability and high sensitivity to cryoprotective agents (CPAs). While successful cryopreservation has been achieved for some marine invertebrates, eggs remain problematic due to their unique characteristics. The study explores the impact of various CPAs and cryopreservation techniques on sea urchin eggs, employing scanning and transmission electron microscopy to analyze cellular damage. The findings reveal that exposure to low CPA concentrations (0.5 M) did not induce significant damage to eggs. However, high concentrations (3 M) proved highly detrimental. Every cryopreservation approach investigated in this study resulted in irreversible damage to the sea urchin eggs, rendering them nonviable for future use. The research sheds light on the importance of understanding the structural alterations induced by CPAs and cryopreservation methods. This knowledge is essential for refining cryopreservation methods, potentially paving the way for successful preservation of these challenging cells.

Optimization of Culture Medium for the Production of an Exopolysaccharide (p-CY02) with Cryoprotective Activity by Pseudoalteromonas sp. RosPo-2 from the Antarctic Sea.

When cells are exposed to freezing temperatures, high concentrations of cryoprotective agents (CPA) prevent ice crystal formation, thus enhancing cell survival. However, high concentrations of CPAs can also cause cell toxicity. Exopolysaccharides (EPSs) from polar marine environments exhibit lower toxicity and display effects similar to traditional CPA. In this study, we sought to address these issues by i) selecting strains that produce EPS with novel cryoprotective activity, and ii) optimizing culture conditions for EPS production. Sixty-six bacteria producing mucous substances were isolated from the Ross Sea (Antarctic Ocean) using solid marine agar plates. Among them, Pseudoalteromonas sp. RosPo-2 was ultimately selected based on the rheological properties of the produced EPS (p-CY02). Cryoprotective activity experiments demonstrated that p-CY02 exhibited significantly cryoprotective activity at a concentration of 0.8% (w/v) on mammalian cells (HaCaT). This activity was further improved when combined with various concentrations of dimethyl sulfoxide (DMSO) compared to using DMSO alone. Moreover, the survival rate of HaCaT cells treated with 5% (v/v) DMSO and 0.8% (w/v) p-CY02 was measured at 87.9 ± 2.8% after freezing treatment. This suggests that p-CY02 may be developed as a more effective, less toxic, and novel non-permeating CPA. To enhance the production of EPS with cryoprotective activity, Response Surface Methodology (RSM) was implemented, resulting in a 1.64-fold increase in production of EPS with cryoprotective activity.

Visualization of Ice Crystal Behavior in Mouse Oocytes During High-Speed Quench Cooling and Ice Inhibition by Antifreezing Hydrogels.

Oocyte vitrification has become a widely adopted method in clinical practice. However, the solidification behavior and its impact on oocytes during the ultrarapid cooling process remain poorly understood. In this study, we established a system and methodology to observe crystallization behavior in oocytes during quench cooling and warming. Subsequently, the threshold concentration of cryoprotective agents (CPAs) required for oocyte vitrification was determined through a visualization method. The results demonstrated that the ice front could not be observed in the image sequence when using 16.5% DMSO +16.5% EG during high-speed quench cooling (2821.58°C/min). Finally, oocytes were encapsulated with an antifreezing hydrogel (7.5% EG +7.5% DMSO +0.5% alginate) and subjected to high-speed quench cooling. No ice crystals appeared in the antifreezing hydrogel-encapsulated oocytes at a low concentration of osmotic CPA (2.4 M). This research opens up new possibilities for oocyte vitrification with a reduced concentration of CPA.

Cooling dynamics of droplets exposed to solid surface freezing and vitrification

Solid surface freezing or vitrification (SSF/SSV) can be done by depositing droplets of a sample, e.g., cells in a preservation solution, onto a pre-cooled metal surface. It is used to achieve higher cooling rates and concomitant higher cryosurvival rates compared to immersion of samples into liquid nitrogen. In this study, numerical simulations of SSF/SSV were conducted by modeling the cooling dynamics of droplets of cryoprotective agent (CPA) solutions. It was assumed that deposited droplets attain a cylindrical bottom part and half-ellipsoidal shaped upper part. Material properties for heat transfer simulations including density, heat capacity and thermal conductivity were obtained from the literature and extrapolated using polynomial fitting. The impact of CPA type, i.e., glycerol (GLY) and dimethyl sulfoxide (DMSO), CPA concentration, and droplet size on the cooling dynamics was simulated at different CPA mass fractions at temperatures ranging from −196 to 25 °C. Simulations show that glycerol solutions cool faster compared to DMSO solutions, and cooling rates increase with decreasing CPA concentration. However, we note that material property data for GLY and DMSO solutions were obtained in different temperature and concentration ranges under different conditions, which complicated making an accurate comparison. Experimental studies show that samples that freeze have a delayed cooling response early on, whereas equilibration times are similar compared to samples that vitrify. Finally, as proof of concept, droplets of human red blood cells (RBCs) were cryopreserved using SSV/SSF comparing the effect of GLY and DMSO on cryopreservation outcome. At 20% (w/w), similar hemolysis rates were found for GLY and DMSO, whereas at 40%, GLY outperformed DMSO.

Elevated fucose content enhances the cryoprotective performance of anionic polysaccharides

Biological cryopreservation often involves using a cryoprotective agent (CPA) to mitigate lethal physical stressors cells endure during freezing and thawing, but effective CPA concentrations are cytotoxic. Hence, natural polysaccharides have been studied as biocompatible alternatives. Here, a subset of 26 natural polysaccharides of various chemical composition was probed for their potential in enhancing the metabolic post-thaw viability (PTV) of cryopreserved Vero cells. The best performing cryoprotective polysaccharides contained significant fucose amounts, resulting in average PTV 2.8-fold (up to 3.1-fold) compared to 0.8-fold and 2.2-fold for all non-cryoprotective and cryoprotective polysaccharides, respectively, outperforming the optimized commercial CryoStor™ CS5 formulation (2.6-fold). Stoichiometrically, a balance between fucose (18–35.7 mol%), uronic acids (UA) (13.5–26 mol%) and high molecular weight (MW > 1 MDa) generated optimal PTV. Principal component analysis (PCA) revealed that fucose enhances cell survival by a charge-independent, MW-scaling mechanism (PC1), drastically different from the charge-dominated ice growth disruption of UA (PC2). Its neutral nature and unique properties distinguishable from other neutral monomers suggest fucose may play a passive role in conformational adaptability of polysaccharide to ice growth inhibition, or an active role in cell membrane stabilization through binding. Ultimately, fucose-rich anionic polysaccharides may indulge in polymer-ice and polymer-cell interactions that actively disrupt ice and minimize lethal volumetric fluctuations due to a balanced hydrophobic-hydrophilic character. Our research showed the critical role neutral fucose plays in enhancing cellular cryopreservation outcomes, disputing previous assumptions of polyanionicity being the sole governing predictor of cryoprotection.

CPA toxicity screening of cryoprotective solutions in rat hearts

In clinical practice, donor hearts are transported on ice prior to transplant and discarded if cold ischemia time exceeds ∼5 h. Methods to extend these preservation times are critically needed, and ideally, this storage time would extend indefinitely, enabling improved donor-to-patient matching, organ utilization, and immune tolerance induction protocols. Previously, we demonstrated successful vitrification and rewarming of whole rat hearts without ice formation by perfusion-loading a cryoprotective agent (CPA) solution prior to vitrification. However, these hearts did not recover any beating even in controls with CPA loading/unloading alone, which points to the chemical toxicity of the cryoprotective solution (VS55 in Euro-Collins carrier solution) as the likely culprit. To address this, we compared the toxicity of another established CPA cocktail (VEG) to VS55 using ex situ rat heart perfusion. The CPA exposure time was 150 min, and the normothermic assessment time was 60 min. Using Celsior as the carrier, we observed partial recovery of function (atria-only beating) for both VS55 and VEG. Upon further analysis, we found that the VEG CPA cocktail resulted in 50 % lower LDH release than VS55 (N = 4, p = 0.017), suggesting VEG has lower toxicity than VS55. Celsior was a better carrier solution than alternatives such as UW, as CPA + Celsior-treated hearts spent less time in cardiac arrest (N = 4, p = 0.029). While we showed substantial improvement in cardiac function after exposure to vitrifiable concentrations of CPA by improving both the CPA and carrier solution formulation, further improvements will be required before we achieve healthy cryopreserved organs for transplant.

Self-pressurized rapid freezing at arbitrary cryoprotectant concentrations.

Self-pressurized rapid freezing (SPRF) has been proposed as a simple alternative to traditional high pressure freezing (HPF) protocols for vitrification of biological samples in electron microscopy and cryopreservation applications. Both methods exploit the circumstance that the melting point of ice reaches a minimum when subjected to pressure of around 210 [MPa], however, in SPRF its precise quantity depends on sample properties and hence, is generally unknown. In particular, cryoprotective agents (CPAs) are expected to be a factor; though eschewed by many SPRF experiments, vitrification of larger samples notably cannot be envisaged without them. Thus, in this study, we address the question of how CPA concentration affects pressure inside sealed capillaries, and how to design SPRF experiments accordingly. By embedding a fiber-optic probe in samples and performing Raman spectroscopy after freezing, we first present a direct assessment of pressure buildup during SPRF, enabled by the large pressure sensitivity of the Raman shift of hexagonal ice. Choosing dimethyl sulfoxide (DMSO) as a model CPA, this approach allows us to demonstrate that average pressure drops to zero when DMSO concentrations of 15 wt % are exceeded. Since a trade-off between pressure and DMSO concentration represents an impasse with regards to vitrification of larger samples, we introduce a sample architecture with two chambers, separated by a partition that allows for equilibration of pressure but not DMSO concentrations. We show that pressure and concentration in the fiber-facing chamber can be tuned independently, and present differential scanning calorimetry (DSC) data supporting the improved vitrification performance of two-chamber designs. Lay version of abstract for "Self-pressurized rapid freezing at arbitrary cryoprotectant concentrations" Anyone is familiar with pipes bursting in winter because the volume of ice is greater than that of liquid water. Less well known is the fact that inside a thick-walled container, sealed and devoid of air bubbles, this pressure buildup will allow a fraction of water to remain unfrozen if the sample is also cooled sufficiently rapidly far below the freezing point. This phenomenon has already been harnessed for specimen preparation in microscopy, where low temperatures are useful to immobilize the sample, but harmful if ice-formation occurs. However, specimen preparation cannot always rely on this pressure-based effect alone, but sometimes requires addition of chemicals to inhibit ice-formation. Not enough is known directly about how these chemicals affect pressure buildup: Indeed, rapid cooling below the freezing point is only possible for small sample volumes, typically placed inside sealed capillaries, so that space is generally insufficient to accommodate a pressure sensor. By means of a compact sensor, based on an optical fiber, laser and spectrometer, we present the first direct assessment of pressure inside sealed capillaries. We show that addition of chemicals reduces pressure build-up and present a two-chambered capillary to circumvent the resulting trade-off. Also, we present evidence showing that the two-chambered capillary design can avoid ice-formation more readily than a single-chambered one. This article is protected by copyright. All rights reserved.

Effects of Different Vitrification Temperatures and Cryoprotective Agent Concentrations on Ultrastructure and Apoptosis Related Proteins in Bovine GV Stage Oocytes

The effects of different vitrification temperatures (VTs) and cryoprotective agent concentrations (CPAs) on the viability, ultrastructure, and apoptosis related proteins Bcl-2, Bax, and TP53 of bovine oocytes at the GV (germinal vesicle) stage were analyzed in this study. Cumulus oocyte complexes (COCs) were randomized into five groups: fresh (control), LHe 5.6 M (liquid helium, -269\dg, cryoprotectant concentration of 5.6 M), LHe 6.6 M (liquid helium, –269°C, cryoprotectant concentration of 6.6 M), LN 5.6 M (liquid nitrogen, –196°C, cryoprotectant concentration of 5.6 M), LN 6.6 M (liquid nitrogen, –196°C, cryoprotectant concentration of 6.6 M). Statistically, in the vitrification groups, LN 5.6 M group showed the lowest rate of morphologically normal, mature, and cleavage (58.1%; 32.9%; 12.9%). LHe 5.6 M showed the highest cleavage rate (39.6%), as well as effectively ameliorated ultrastructural damage, significantly reduced Bax protein expression, effectively increased Bcl-2 protein expression, reduced TP53 protein expression, in general, it increased the anti-apoptotic ability of the oocytes after vitrification. It was concluded that lower vitrification temperature and decreased cryoprotectant concentrations upregulate the expression of Bcl-2 protein and downregulate the expression of Bax and TP53 protein in oocytes, and enhance the anti-apoptotic capacity of oocytes, ameliorated the damage of the ultrastructure of the oocytes, perhaps improved the developmental capacity of bovine GV stage oocytes after vitrification can be partially attributed to the above changes.

Effects of Vitrification Temperatures and Concentration of Cryoprotective Agents on the Cytoskeleton in Bovine Immature Oocytes

The objective of the research was to evaluate the effect of vitrification temperatures (VTs) and concentration of cryoprotective agents (CPAs) on the cytoskeleton of bovine immature oocytes (BIOs). Bovine cumulus oocyte complexes (COCs) were collected and divided randomly into five groups: (a) fresh control group, (b) oocytes vitrified in liquid helium (LHe; −269◦C with 5.6 M CPAs, (c) oocytes vitrified in LHe (−269◦C with 6.6 M CPAs, (d) oocytes vitrified in liquid nitrogen (LN; −196 ◦C with 5.6 M CPAs, (e) oocytes vitrified in LN (−196◦C with 6.6 M CPAs. The results showed that the developmental level of BIOs in the LHe 5.6 M group was the highest among the four vitrification groups, and the maturation rate and cleavage rate were significantly higher than the other three vitrification groups (P < 0.05). With further experiments, the normal rate of microfilament and spindle in the LHe 5.6 M group was the highest compared with the other three vitrification groups. It was concluded that lower VT (−269◦C and lower CPAs (5.6 M) could significantly reduce damage to the cytoskeleton, which had a positive effect on the development of oocytes after vitrification.

Permeation of individual cryoprotectants and their different combinations into mouse liver tissue

Development of successful tissue cryopreservation methods requires specific knowledge regarding tissue permeation of individual cryoprotective agents (CPAs) and their combinations. The present study assessed the permeation of dimethyl sulfoxide, ethylene glycol, and propylene glycol into liver tissue, and addressed whether the diffusion coefficient of individual CPAs changes when combining CPAs. To do this, mouse liver slices were exposed at room temperature to 3.5 mol/L concentrations of CPAs individually or in combination for 15, 30, 45, and 60 min. Subsequently, tissue CPA concentrations were determined using a gas chromatography/mass spectrometry (GC/MS) method. Our results show that (1) the GC/MS method allows measurement of multiple CPA concentrations in a single small tissue sample, (2) dimethyl sulfoxide has a higher diffusion coefficient than ethylene glycol and propylene glycol, and (3) the CPA diffusivity appears to decrease in mixtures with multiple CPAs. These findings may help the development of effective tissue cryopreservation methods.

New Cryoprotectant Loading Method for Cell Droplet Vitrification with Continuous Evaporation.

Droplet-based vitrification is considered to be a promising cryopreservation method, which achieves high cell viability through high cooling rates and low concentrations of cryoprotective agents (CPAs). However, the droplet vitrification cryopreservation process needs in-depth research, such as the balance of the CPA concentration and the cooling rate, the CPA loading process, and the droplet encapsulation method. Here, we developed a chip with a high cooling rate for vitrification droplet encapsulation and provided a new method for continuous loading of low-concentration CPA droplets by evaporation. The results showed that the CPA droplet volume decreased exponentially with the evaporation time, and the larger the initial droplet size, the longer the evaporation time to achieve the critical vitrification concentration. There was no significant difference in the viability of MSCs, NHEK, and A549 cells between the evaporation loading vitrification method and the traditional slow freezing method, but the former was easier to operate and can balance the cooling rate and concentration by controlling the evaporation time. Moreover, a theoretical model was proposed to predict the CPA concentration inside the microdroplets dependent on the evaporation time. The current work provides a potential method to load low-concentration CPAs for cell vitrification preservation, which is more beneficial for cell therapy and other regenerative medicine applications.

Rapid joule heating improves vitrification based cryopreservation

Cryopreservation by vitrification has far-reaching implications. However, rewarming techniques that are rapid and scalable (both in throughput and biosystem size) for low concentrations of cryoprotective agent (CPA) for reduced toxicity are lacking, limiting the potential for translation. Here, we introduce a joule heating–based platform technology, whereby biosystems are rapidly rewarmed by contact with an electrical conductor that is fed a voltage pulse. We demonstrate successful cryopreservation of three model biosystems with thicknesses across three orders of magnitude, including adherent cells (~4 µm), Drosophila melanogaster embryos (~50 µm) and rat kidney slices (~1.2 mm) using low CPA concentrations (2–4 M). Using tunable voltage pulse widths from 10 µs to 100 ms, numerical simulation predicts that warming rates from 5 × 104 to 6 × 108 °C/min can be achieved. Altogether, our results present a general solution to the cryopreservation of a broad spectrum of cellular, organismal and tissue-based biosystems.

The effect of sucrose supplementation on chondrocyte viability in porcine articular cartilage following vitrification

Vitrification can extend the banking life of articular cartilage (AC) and improve osteochondral transplantation success. Current vitrification protocols require optimization to enable them to be implemented in clinical practice. Sucrose as a non-permeating cryoprotective agent (CPA) and clinical grade chondroitin sulfate (CS) and ascorbic acid (AA) as antioxidants were investigated for their ability to improve a current vitrification protocol for AC. The aim of this study was to assess the impact of sucrose and CS/AA supplementation on post-warming chondrocyte viability in vitrified AC. Porcine osteochondral dowels were randomly vitrified and warmed with one established protocol (Protocol 1) and seven modified protocols (Protocols 2–8) followed by chondrocyte viability assessment. Sucrose supplementation in both vitrification and warming media (Protocol 4) resulted in significantly higher (p = 0.018) post-warming chondrocyte viability compared to the protocol without sucrose (Protocol 1). There was no significant difference (p = 0.298) in terms of post-warming chondrocyte viability between sucrose-supplemented DMEM + CS solution (Protocol 4) and Unisol-CV (UCV) + CS (Protocol 6) solution. Clinical grade CS and AA contributed to similar post-warming chondrocyte viability to previous studies using research grade CS and AA, indicating their suitability for clinical use. The addition of an initial step (step 0) to reduce the initial concentration of CPAs to minimize osmotic effects did not enhance chondrocyte viability in the superficial layer of AC. In conclusion, sucrose-supplemented DMEM + clinical grade CS (Protocol 4) could be an ideal protocol to be investigated for future use in clinical applications involving vitrified AC.

Comparison of dilute and nondilute osmotic equilibrium models for erythrocytes

Successful cryopreservation requires the addition of cryoprotective agents (CPAs). The addition of permeating CPAs, such as glycerol, is associated with some risk to the cells and tissues. These risks are both related to the CPA themselves (CPA toxicity) and to the volume response of the cell (osmotic damage). To minimize the potential for damage during cryopreservation, mathematical models are often employed to understand the interactions between protocols and cell volume responses. In the literature, this volume response is usually captured using ideal and dilute approximations of chemical potential and osmolality, an approach that has been called into question for cells in high concentrations of CPAs. To address this, the relevance of non-ideal and non-dilute models has been explored in a number of cell types in the presence of permeating CPAs. However, it has not been explored in erythrocytes, which have a cytosolic hemoglobin content of more than 20% by volume and are cryopreserved in 40% glycerol. Because hemoglobin has been suggested to be a highly non-ideal solute, if the non-ideal and non-dilute transport model is relevant to any cells, it should be relevant to erythrocytes. Here we investigate the use, and accuracy, of both the dilute and non-dilute models in predicting cell volume changes during CPA equilibration in erythrocytes, and demonstrate that using published values for the non-ideal and non-dilute model, applied to erythrocytes, leads to model predictions inconsistent with experimental data, whereas dilute approximations align well with experimental data.

Cryopreservation and Cryobanking of Cells from 100 Coral Species.

When coral species become extinct, their genetic resources cannot be recovered. Coral cryobanks can be employed to preserve coral samples and thereby maintain the availability of the samples and increase their potential to be restocked. In this study, we developed a procedure to determine coral species-specific requirements for cryobank freezing through determining suitable cryoprotective agents (CPAs), CPA concentrations, equilibration times, holding durations, viability rates, and cell amounts for banked coral cells, and we established the first ever coral cell cryobank. Coral cells, including supporting and gland cells, epidermal nematocysts, Symbiodiniaceae and symbiotic endoderm cells (SEC) were found from the extracted protocol. Approximately half of the corals from the experimental corals consisted of spindle and cluster cells. Gastrodermal nematocysts were the least common. The overall concentration of Symbiodiniaceae in the coral cells was 8.6%. Freezing using DMSO as a CPA was suitable for approximately half of the corals, and for the other half of species, successful cell cryopreservation was achieved using MeOH and EG. EG and DMSO had similar suitabilities for Acanthastrea, Euphyllia, Favites, Lobophyllia, Pavona, Seriatopora, and Turbinaria, as did EG and MeOH for Acropora, Echinopyllia, and Sinularia and MeOH and DMSO for Platygyra after freezing. At least 14 straws from each species of coral were cryobanked in this study, totaling more than 1884 straws (0.5 mL) with an average concentration of 6.4 × 106 per mL. The results of this study may serve as a framework for cryobanks worldwide and contribute to the long-term conservation of coral reefs.

Freezing chicken semen: Influence of base medium osmolality, cryoprotectants, cryoprotectant concentration, and cooling rate on post-thaw sperm survival

A classical chicken semen diluent (Lake's 7.1 diluent) was modified to have lowered osmolalities (ranging from 290 to 410 mOsm/kg). The modified medium with physiological osmolality of 325 mOsm/kg allowed cold storage of fresh semen for several days with very little loss of membrane integrity and motility, while high osmolalities inhibited motility. This modified medium was then used as base for freezing medium to test effects of the type and concentration of cryoprotective agent (CPA), and the cooling rate (CR). A number of CPAs (methylformamide, methylacetamide, dimethylformamide (DMF), dimethylacetamide (DMA), diethylformamide, and propylene glycol) were first compared by freezing semen with 0.6 mol/l of the respective CPA at a cooling rate of 250 °C/min. Post-thaw motility and membrane integrity were highest with DMA and DMF. Finally, in more detailed factorial experiments, semen from individual cocks or pooled semen was frozen using CRs of 4, 50, 250, and 440 °C/min and DMA concentrations ([DMA]) of 0.4, 0.6, 1.0, and 1.5 mol/l. Straws from each semen sample x treatment combination were divided for semen assessment at three different research groups for sperm motility, membrane integrity, kinked tails, and DNA fragmentation, using microscopy, computer assisted motility analysis, and flow cytometry. There were clear effects of both CR and [DMA] and their interaction. CRs 50 and 250 °C/min gave best post-thaw sperm performance. Higher DMA concentrations gave better post-thaw membrane integrity, but concentrations above 1.0 mol/l can decrease sperm velocity or even inhibit sperm motility. Therefore [DMA] may best be 0.6–1.0 mol/l at a CR of 50–250 °C/min.

LncRNA-mediated effects of vitrification temperatures and cryoprotectant concentrations on bovine oocyte development following vitrification at the GV stage

We evaluated the effects of different vitrification temperatures (VTs) and cryoprotective agent concentrations (CPAs) on the viability and expressions of long non-coding RNA (lncRNA) in bovine oocytes following vitrification at the germinal vesicle (GV) stage. Our findings provide a theoretical support for improvement of the cryopreservation technology of bovine immature oocytes (BIOs). Bovine cumulus oocyte complexes (COCs) were collected and randomized into five groups: fresh oocytes (control), oocytes vitrified in liquid helium (LHe; −269 °C) with 5.6 M CPAs (LHe 5.6 M), oocytes vitrified in LHe with 6.6 M CPAs (LHe 6.6 M), oocytes vitrified in liquid nitrogen (LN; −196 °C) with 5.6 M CPAs (LN 5.6 M), and oocytes vitrified in LN with 6.6 M CPAs (LN 6.6 M). Of the four vitrification groups, the LHe 5.6 M group exhibited the highest blastocyst rate (13.22%), followed by the LHe 6.6 M group (10.19%) and LN 6.6 M group (9.77%), while the LN 5.6 M group had the lowest blastocyst rate (1.87%). Then, lncRNA expressions in the five groups were profiled. A total of 18,271 lncRNAs were identified, of which 2,158 were differentially expressed lncRNAs (DELs) in the vitrified groups, compared to the fresh group (P < 0.05; fold-change > 2). Co-location (cis) and co-expression (trans) prediction revealed 14 differentially expressed target genes (DETGs), which corresponded to 17 DELs. Based on grouping data and expression profiles of the DELs, we demonstrated that different VTs (−269 °C vs. −196 °C) can affect the expressions of MSTRG.12295.5, MSTRG.37123.1, MSTRG.37930.2, MSTRG.40464.9, MSTRG.8869.3 and MSTRG.26680.6. Expressions of these lncRNAs were affected by CPAs only in the condition of vitrification with LHe (−269 °C). Expressions of MSTRG.35129.6 were associated with exposures to both VTs and CPAs; while expressions of MSTRG.3578.3, MSTRG.40576.3, MSTRG.6723.5, MSTRG.32862.4, MSTRG.1184.4, MSTRG.33110.3, MSTRG.40454.2, MSTRG.41073.2, MSTRG.44732.4 and MSTRG.6729.3 might be related to vitrification. Co-expression analysis showed that MSTRG.12295.5, MSTRG.37930.2, MSTRG.40454.2, MSTRG.8869.3 and MSTRG.6723.5 expressions affect oocyte development after vitrification by regulating target gene expressions. Taken together, improvement of the developmental ability of BIOs after LHe vitrification maybe attributed to changes in expressions of some lncRNAs. Our findings elucidate on the molecular mechanisms underlying the development of BIOs under different VTs and CPAs.

Supplemented phase diagrams for vitrification CPA cocktails: DP6, VS55 and M22

DP6, VS55 and M22 are the most commonly used cryoprotective agent (CPA) cocktails for vitrification experiments in tissues and organs. However, complete phase diagrams for the three CPAs are often unavailable or incomplete (only available for full strength CPAs) thereby hampering optimization of vitrification and rewarming procedures. In this paper, we used differential scanning calorimetry (DSC) to measure the transition temperatures including heterogeneous nucleation temperatures (Thet), glass transition temperatures (Tg), rewarming phase crystallization (devitrification and/or recrystallization) temperatures (Td) and melting temperatures (Tm) while cooling or warming the CPA sample at 5 °C/min and plotted the obtained transition temperatures for different concentrations of CPAs into the phase diagrams. We also used cryomicroscopy cooling or warming the sample at the same rate to record the ice crystallization during the whole process, and we presented the cryomicroscopic images at the transition temperatures, which agreed with the DSC presented phenomena.

Thermal Analyses of Nanowarming-Assisted Recovery of the Heart From Cryopreservation by Vitrification.

This study explores thermal design aspects of nanowarming-assisted recovery of the heart from indefinite cryogenic storage, where nanowarming is the volumetric heating effect of ferromagnetic nanoparticles excited by a radio frequency electromagnet field. This study uses computational means while focusing on the human heart and the rat heart models. The underlying nanoparticle loading characteristics are adapted from a recent, proof-of-concept experimental study. While uniformly distributed nanoparticles can lead to uniform rewarming, and thereby minimize adverse effects associated with ice crystallization and thermomechanical stress, the combined effects of heart anatomy and nanoparticle loading limitations present practical challenges which this study comes to address. Results of this study demonstrate that under such combined effects, nonuniform nanoparticles warming may lead to a subcritical rewarming rate in some parts of the domain, excessive heating in others, and increased exposure potential to cryoprotective agents (CPAs) toxicity. Nonetheless, the results of this study also demonstrate that computerized planning of the cryopreservation protocol and container design can help mitigate the associated adverse effects, with examples relating to adjusting the CPA and/or nanoparticle concentration, and selecting heart container geometry, and size. In conclusion, nanowarming may provide superior conditions for organ recovery from cryogenic storage under carefully selected conditions, which comes with an elevated complexity of protocol planning and optimization.

Effects of cryoprotectants on phospholipid monolayers – concentration and species dependence

The effects of four cryoprotectants (dimethylformamide (DMF), ethylene glycol (EG), glycerol and dimethyl sulfoxide (DMSO)) on monolayers of four phospholipids were investigated at high cryoprotectant concentration (10% v/v) relevant to cryoprotection, and compared with previous work at lower concentrations (5% v/v). The results show that the interactions between cryoprotective agents (CPAs) and lipids are complex, with significant differences identified as functions of CPA, concentration and phospholipid species. It was observed that generally DMF and EG cause monolayer compaction, whereas glycerol causes expansion (penetrating the monolayer), although each exhibited subtle differences with different phospholipids. DMSO showed significant differences depending on the headgroup (phosphatidylcholine vs phosphatidylethanolamine) and the physical state of the monolayer. In addition, it was found that DMF was the only CPA capable of penetrating monolayers at physiologically relevant lateral pressures. The results highlight that conclusions based on a single model system (e.g. DPPC) should not be extrapolated to other lipids, and there is a need to study a wider range of lipid species and CPA concentrations in order to understand their mechanisms of action more fully.