Cross-polarization Magic Angle Spinning NMR Research Articles

Pd8(PDip)6: Cubic, Unsaturated, Zerovalent.

Atomically precise nanoclusters hold promise for supramolecular assembly and (opto)electronic- as well as magnetic materials. Herein, this work reports that treating palladium(0) precursors with a triphosphirane affords strongly colored Pd8(PDip)6 that is fully characterized by mass spectrometry, heteronuclear and Cross-Polarization Magic-Angle Spinning (CP-MAS) NMR-, infrared (IR), UV-vis, and X-ray photoelectron (XP) spectroscopies, single-crystal X-Ray diffraction (sc-XRD), mass spectrometry, and cyclovoltammetry (CV). This coordinatively unsaturated 104-electron Pd(0) cluster features a cubic Pd8-core, µ4-capping phosphinidene ligands, and is air-stable. Quantum chemical calculations provide insight to the cluster's electronic structure and suggest 5s/4d orbital mixing as well as minor Pd─P covalency. Trapping experiments reveal that cluster growth proceeds via insertion of Pd(0) into the triphosphirane. The unsaturated cluster senses ethylene and binds isocyanides, which triggers the rearrangement to a tetrahedral structure with a reduced frontier orbital energy gap. These experiments demonstrate facile cluster manipulation and highlight non-destructive cluster rearrangement as is required for supramolecular assembly.

A new route of production of the meso-porous chitosan with well-organized honeycomb surface microstructure from shrimp waste without destroying the original structure of native shells: Extraction, modification and characterization study

The highly active bio-polysaccharide based compound namely chitin and chitosan have been extracted from shrimp shell which usually expelled out extensively from food processing industries and considered as waste materials. However, by conducting demineralization, de-proteinization and deacetylation on it which could be a new route of production of valuable meso-porous chitosan that possesses a noteworthy well-organized honeycomb like surface microstructure which undoubtedly capable to form sustainable bio-composites. Whereas the honeycomb like microstructures showed a well-defined pore canals (Pc) and pore canal tubes (Pct) onto their surface. The samples were characterized via ATR-FTIR spectroscopy, High resolution SEM, AFM, EDX, XRD and 13C solid-state Cross-Polarization Magic Angle Spinning (CPMAS) NMR. The molecular weight(M‾v) of isolated chitin and chitosan were determined by viscosity and the values were 1.06 × 106(DPv = 5228), 1.8 × 104(DPv = 116) respectively besides degree of deacetylation (DDA) were measured by ATR-FTIR spectroscopy, CPMAS NMR, pH-metric titration and the values were 24&21 for chitin and 84&82 for chitosan. The results suggest that the shrimp shell waste is an attractive source of well-organized honeycomb like meso-porous chitin and chitosan with regular surface microstructures which might have a significant/potential application into the sustainable bio-composite formulation due to various industrial and biomedical sector indeed.

A Porous Crystalline Nitrone-Linked Covalent Organic Framework.

Herein, we report the synthesis of a nitrone-linked covalent organic framework, COF-115, by combining N, N', N', N'''-(ethene-1, 1, 2, 2-tetrayltetrakis(benzene-4, 1-diyl))tetrakis(hydroxylamine) and terephthaladehyde via a polycondensation reaction. The formation of the nitrone functionality was confirmed by solid-state 13 C multi cross-polarization magic angle spinning NMR spectroscopy of the 13 C-isotope-labeled COF-115 and Fourier-transform infrared spectroscopy. The permanent porosity of COF-115 was evaluated through low-pressure N2 , CO2 , and H2 sorption experiments. Water vapor and carbon dioxide sorption analysis of COF-115 and the isoreticular imine-linked COF indicated a superior potential of N-oxide-based porous materials for atmospheric water harvesting and CO2 capture applications. Density functional theory calculations provided valuable insights into the difference between the adsorption properties of these COFs. Lastly, photoinduced rearrangement of COF-115 to the associated amide-linked material was successfully demonstrated.

In Situ Multinuclear Magic-Angle Spinning NMR: Monitoring Crystallization of Molecular Sieve AlPO4-11 in Real Time.

Molecular sieves are crystalline three-dimensional frameworks with well-defined channels and cavities. They have been widely used in industry for many applications such as gas separation/purification, ion exchange, and catalysis. Obviously, understanding the formation mechanisms is fundamentally important. High-resolution solid-state NMR spectroscopy is a powerful method for the study of molecular sieves. However, due to technical challenges, the vast majority of the high-resolution solid-state NMR studies on molecular sieve crystallization are ex situ. In the present work, using a new commercially available NMR rotor that can withhold high pressure and high temperature, we examined the formation of molecular sieve AlPO4-11 under dry gel conversion conditions by in situ multinuclear (1H, 27Al, 31P, and 13C) magic-angle spinning (MAS) solid-state NMR. In situ high-resolution NMR spectra obtained as a function of heating time provide much insights underlying the crystallization mechanism of AlPO4-11. Specifically, in situ 27Al and 31P MAS NMR along with 1H → 31P cross-polarization (CP) MAS NMR were used to monitor the evolution of the local environments of framework Al and P, in situ 1H → 13C CP MAS NMR to follow the behavior of the organic structure directing agent, and in situ 1H MAS NMR to unveil the effect of water content on crystallization kinetics. The in situ MAS NMR results lead to a better understanding of the formation of AlPO4-11.

Design of β-Alanine-Derived Novel C18 Stationary Phase Containing Embedded Urea and Amide Groups for the Separation of Versatile Analytes.

Novel stationary phases have been emerging recently. A β-alanine-derived embedded urea and amide group-containing C18 phase (Sil-Ala-C18) was prepared for the first time. The media were packed into a 150 × 2.1 mm HPLC column, and the newly designed column was evaluated with the Tanaka and Neue test protocols in reversed-phase liquid chromatography (RPLC) separation mode. Moreover, it was characterized by the Tanaka test protocol in hydrophilic interaction chromatography (HILIC) separation mode. The new phase was characterized by elemental analysis, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and solid-state 13C cross-polarization magic angle spinning (CP/MAS) NMR spectroscopy at variable temperatures. The chromatographic evaluation involved very good separation of nonpolar shape-constrained isomers, polar and basic compounds in RPLC, and highly polar compounds in HILIC compared to the commercial reference columns. The Sil-Ala-C18 phase was able to separate the challenging β- and γ-isomers of tocopherol. The phase was also successfully applied for the separation of the isomers of tocopherol (vitamin E) and capsaicinoids from real samples of chili peppers (Capsicum spp.) in RPLC and ascorbic acid (vitamin C) in HILIC.

Tricarbonyl-Pyrazine-Molybdenum(0) Metal-Organic Frameworks for the Storage and Delivery of Biologically Active Carbon Monoxide.

Metal-organic frameworks (MOFs) have high potential as nanoplatforms for the storage and delivery of therapeutic gasotransmitters or gas-releasing molecules. The aim of the present study was to open an investigation into the viability of tricarbonyl-pyrazine-molybdenum(0) MOFs as carbon monoxide-releasing materials (CORMAs). A previous investigation found that the reaction of Mo(CO)6 with excess pyrazine (pyz) in a sealed ampoule gave a mixture comprising a major triclinic phase with pyz-occupied hexagonal channels, formulated as fac-Mo(CO)3(pyz)3/2·1/2pyz (Mo-hex), and a minor dense cubic phase, formulated as fac-Mo(CO)3(pyz)3/2 (Mo-cub). In the present work, an open reflux method in toluene has been optimized for the large-scale synthesis of the pure Mo-cub phase. The crystalline solids Mo-hex and Mo-cub were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), FT-IR and FT-Raman spectroscopies, and 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR spectroscopy. The release of CO from the MOFs was studied by the deoxy-myoglobin (deoxy-Mb)/carbonmonoxy-myoglobin (MbCO) UV-vis assay. Mo-hex and Mo-cub release CO upon contact with a physiological buffer in the dark, delivering 0.35 and 0.22 equiv (based on Mo), respectively, after 24 h, with half-lives of 3-4 h. Both materials display high photostability such that the CO-releasing kinetics is not affected by irradiation of the materials with UV light. These materials are attractive as potential CORMAs due to the slow release of a high CO payload. In the solid-state and under open air, Mo-cub underwent almost complete decarbonylation over a period of 4 days, corresponding to a theoretical CO release of 10 mmol per gram of material.

Inclusion Polymerization of Pyrrole and Ethylenedioxythiophene in Assembled Triphenylamine Bis-Urea Macrocycles

Herein, two different monomers, pyrrole (Py) and ethylenedioxythiophene (EDOT), are loaded into a self-assembled bis-urea host 1 and oxidatively polymerized within its nanochannels, dramatically changing the properties of the crystalline complexes. Molecular dynamics (MD) simulation of both monomers within the channel demonstrates that they diffuse through the confinement upon applying thermal energy, which may facilitate the polymerization reaction. The structures of these host–guest complexes are characterized before and after polymerization using solid-state and photophysical measurements. The host maintains its columnar morphology during polymerization at 90 °C using iodine as an oxidizing agent. Intriguingly, upon dissolution of the host and recovery by filtration, the polymers exhibit memory of their nanoreactor environment, displaying unusual order by scanning electron microscopy, powder X-ray diffraction, and small- and wide-angle X-ray analysis. Solid-state 13C cross-polarized magic angle spinning NMR suggests that polypyrrole (PPy) exhibits primarily α,α′ linkages with some contributions from the quinoid form. Similarly, poly(ethylenedioxythiophene) (PEDOT) also exhibits formation of primarily α,α′ linkages with minor quinoid contributions. Both the 1·PPy and 1·PEDOT crystals show a 103-fold increase in conductivity to ∼10–6 S/cm versus host 1 crystals, which are nonconductive ∼10–9 S/cm. Overall, supramolecular polymerization strategies have the potential to readily modulate the properties of nanostructured materials.

CP-MAS and Solution NMR Studies of Allosteric Communication in CA-assemblies of HIV-1

Solution and solid-state NMR spectroscopy are highly complementary techniques for studying structure and dynamics in very high molecular weight systems. Here we have analysed the dynamics of HIV-1 capsid (CA) assemblies in presence of the cofactors IP6 and ATPγS and the host-factor CPSF6 using a combination of solution state and cross polarisation magic angle spinning (CP-MAS) solid-state NMR. In particular, dynamical effects on ns to µs and µs to ms timescales are observed revealing diverse motions in assembled CA.Using CP-MAS NMR, we exploited the sensitivity of the amide/Cα-Cβ backbone chemical shifts in DARR and NCA spectra to observe the plasticity of the HIV-1 CA tubular assemblies and also map the binding of cofactors and the dynamics of cofactor-CA complexes. In solution, we measured how the addition of host- and co-factors to CA -hexamers perturbed the chemical shifts and relaxation properties of CA-Ile and -Met methyl groups using transverse-relaxation-optimized NMR spectroscopy to exploit the sensitivity of methyl groups as probes in high-molecular weight proteins. These data show how dynamics of the CA protein assembly over a range of spatial and temporal scales play a critical role in CA function. Moreover, we show that binding of IP6, ATPγS and CPSF6 results in local chemical shift as well as dynamic changes for a significant, contiguous portion of CA, highlighting how allosteric pathways communicate ligand interactions between adjacent CA protomers.

A 5-(2-Pyridyl)tetrazolate Complex of Molybdenum(VI), Its Structure, and Transformation to a Molybdenum Oxide-Based Hybrid Heterogeneous Catalyst for the Epoxidation of Olefins

There is a considerable practical interest in discovering new ways to obtain organomolybdenum heterogeneous catalysts for olefin epoxidation that are easier to recover and reuse and display enhanced productivity. In this study, the complex salt (H2pytz)[MoO2Cl2(pytz)] (1) (Hpytz = 5-(2-pyridyl)tetrazole) has been prepared, structurally characterized, and employed as a precursor for the hydrolysis-based synthesis of a microcrystalline molybdenum oxide/organic hybrid material formulated as [MoO3(Hpytz)] (2). In addition to single-crystal X-ray diffraction (for 1), compounds 1 and 2 were characterized by FT-IR and Raman spectroscopies, solid-state 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR, and scanning electron microscopy (SEM). Compounds 1 and 2 were evaluated as olefin epoxidation catalysts using the model reaction of cis-cyclooctene (Cy8) with tert-butyl hydroperoxide (TBHP), at 70 °C, which gave 100% epoxide selectivity up to 100% conversion. While 1 behaved as a homogeneous catalyst, hybrid 2 behaved as a heterogeneous catalyst and could be recovered for recycling without showing structural degradation or loss of catalytic performance over consecutive reaction cycles. The substrate scope was broadened to monoterpene DL-limonene (Lim) and biobased unsaturated fatty acid methyl esters, methyl oleate (MeOle), and methyl linoleate (MeLin), which gave predominantly epoxide products.

Stoichiomorphic halogen-bonded cocrystals: a case study of 1,4-diiodotetrafluorobenzene and 3-nitropyridine

The concept of variable stoichiometry cocrystallization is explored in halogen-bonded systems. Three novel cocrystals of 1,4-diiodotetrafluorobenzene and 3-nitropyridine with molar ratios of 1:1, 2:1, and 1:2, respectively, are prepared by slow evaporation methods. Single-crystal X-ray diffraction analysis reveals key differences between each of the nominally similar cocrystals. For instance, the 1:1 cocrystal crystallizes in the P21/n space group and features a single chemically and crystallographically unique halogen bond between iodine and the pyridyl nitrogen. The 2:1 cocrystal crystallizes in the [Formula: see text] space group and features a halogen bond between iodine and one of the nitro oxygens in addition to an iodine–nitrogen halogen bond. The 1:2 cocrystal crystallizes with a large unit cell (V = 9896 Å3) in the Cc space group and features 10 crystallographically distinct iodine-nitrogen halogen bonds. Powder X-ray diffraction experiments carried out on the 1:1 and 2:1 cocrystals confirm that gentle grinding does not alter the crystal forms. 1H → 13C and 19F → 13C cross-polarization magic angle spinning (CP/MAS) NMR experiments performed on powdered samples of the 1:1 and 2:1 cocrystals are used as spectral editing tools to select for either the halogen bond acceptor or donor, respectively. Carbon-13 chemical shifts in the cocrystals are shown to change only very subtly relative to pure solid 1,4-diiodotetrafluorobenzene, but the shift of the carbon directly bonded to iodine nevertheless increases, consistent with halogen bond formation (e.g., a shift of +1.6 ppm for the 2:1 cocrystal). This work contributes new examples to the field of variable stoichiometry cocrystal engineering with halogen bonds.

Direct Preparation of *MRE Zeolites with Ultralarge Mesoporosity: Strategy and Working Mechanism.

Introduction of mesopore is critical for applications where mass-transport limitations within microporous networks, especially for zeolite with one-dimensional microporous network, hinder their performance. Generally, the creation of mesopore in zeolite through a direct synthesis route is strongly dependent on complex and expensive organic molecules, which limits their commercial application. Here, we successfully developed a facile synthesis route for preparing ZSM-48 zeolite (*MRE topology) with ultralarge mesoporosity in which typical 1,6-hexylenediamine worked as an organic structure-directing agent, innovatively assisted by a simple crystal growth modifier (tetraethylammonium bromide, TEABr). The working mechanism of TEABr during crystallization was revealed and proposed on the basis of TEM, thermal gravimetric mass spectrum, and 13C cross-polarization magic angle spinning NMR characterization results. In the process, TEA+ ions preferentially interacted with the solid during the induction period, which effectively suppressed the aggregation of ZSM-48 primary nanorods. As a result, ultralarge mesoporosity of 0.97 cm3·g-1 was constructed through the stacking of the nanorods. Interestingly, TEA+ ions only took part in the crystallization process and did not occlude in the pores of the final zeolites indicating its potential in recyclability. Moreover, similar synthesis strategy could be applied for the preparation of hierarchical ferrierite zeolites, implying the universality of this strategy. Compared with a conventional sample, ZSM-48 zeolite with ultralarge mesoporosity showed superior catalytic stability in the m-xylene isomerization reaction due to its significantly enhanced diffusion and mass transfer capability, which will greatly promote the practical application of ZSM-48 zeolite.

Revealing the Surface Structure of CdSe Nanocrystals by Dynamic Nuclear Polarization-Enhanced 77Se and 113Cd Solid-State NMR Spectroscopy.

Dynamic nuclear polarization (DNP) solid-state NMR (SSNMR) spectroscopy was used to obtain detailed surface structures of zinc blende CdSe nanocrystals (NCs) with plate or spheroidal morphologies which are capped by carboxylic acid ligands. 1D 113Cd and 77Se cross-polarization magic angle spinning (CPMAS) NMR spectra revealed distinct signals from Cd and Se atoms on the surface of the NCs, and those residing in bulk-like environments, below the surface. 113Cd cross-polarization magic-angle-turning (CP-MAT) experiments identified CdSe3O, CdSe2O2, and CdSeO3 Cd coordination environments on the surface of the NCs, where the oxygen atoms are presumably from coordinated carboxylate ligands. The sensitivity gain from DNP enabled natural isotopic abundance 2D homonuclear 113Cd-113Cd and 77Se-77Se and heteronuclear 113Cd-77Se scalar correlation solid-state NMR experiments which revealed the connectivity of the Cd and Se atoms. Importantly, 77Se{113Cd} scalar heteronuclear multiple quantum coherence (J-HMQC) experiments were used to selectively measure one-bond 77Se-113Cd scalar coupling constants (1J(77Se, 113Cd)). With knowledge of 1J(77Se, 113Cd), heteronuclear 77Se{113Cd} spin echo (J-resolved) NMR experiments were used to determine the number of Cd atoms bonded to Se atoms and vice versa. The J-resolved experiments directly confirmed that major Cd and Se surface species have CdSe2O2 and SeCd4 stoichiometries, respectively. Considering the crystal structure of zinc blende CdSe and the similarity of the solid-state NMR data for the platelets and spheroids, we conclude that the surface of the spheroidal CdSe NCs is primarily composed of {100} facets. The methods outlined here will generally be applicable to obtain detailed surface structures of various main group semiconductor nanoparticles.

Microporous Hyper-Cross-Linked Polymers with High and Tuneable Content of Pyridine Units: Synthesis and Application for Reversible Sorption of Water and Carbon Dioxide.

New hyper-cross-linked porous organic polymers (POPs) with a high content of pyridine segments (7.86 mmol pyridine g-1 ), and a micro/mesoporous texture are reported. The networks are achieved by the chain-growth homopolymerization of 2,6- and 3,5-diethynylpyridines. The pyridine segments form links interconnecting the polyacetylene main chains in these networks. The content of pyridine segments in the networks can be tuned by copolymerizing diethynylpyridines with 1,3-diethynylbenzene. The pyridine rings in the networks serve as base and hydrophilic centers for the sorption of CO2 and water. The homopolymer pyridine networks are highly efficient in the low-pressure adsorption/desorption of CO2 . This sorption mode is promising for the postcombustion removal of CO2 from the fuel gas. The poly(3,5-diethynylpyridine) network exhibits high efficiency in capturing and releasing water vapor (determined capacity 376 mg g-1 at 298 K and relative humidity (RH) = 90% is one of the highest values reported for POPs) and is a promising material for the cyclic water harvesting from air. The reported networks are characterized by 13 C cross-polarization magic angle spinning NMR, thermogravimetric analysis, and N2 adsorption/desorption and their efficiency in CO2 and H2 O capturing is discussed in relation to the content and type of incorporated pyridine segments.

A hafnium-based metal-organic framework for the entrapment of molybdenum hexacarbonyl and the light-responsive release of the gasotransmitter carbon monoxide

A carbon monoxide-releasing material (CORMA) has been prepared by inclusion of molybdenum hexacarbonyl in a hafnium-based metal-organic framework (MOF) with the UiO-66 architecture. Mo(CO)6 was adsorbed from solution to give supported materials containing 6.0–6.6 wt% Mo. As confirmed by powder X-ray diffraction (PXRD) and SEM coupled with energy dispersive X-ray spectroscopy, neither the crystallinity nor the morphology of the porous host was affected by the loading process. While the general shape of the N2 physisorption isotherms (77 K) did not change significantly after encapsulation of Mo(CO)6, the micropore volume decreased by ca. 20%. Thermogravimetric analysis of the as-prepared materials revealed a weight loss step around 160 °C associated with the decomposition of Mo(CO)6 to subcarbonyl species. Confirmation for the presence of encapsulated Mo(CO)6 complexes was provided by FT-IR and 13C{1H} cross-polarization magic-angle spinning NMR spectroscopies. To test the capability of these materials to behave as CORMAs and transfer CO to heme proteins, the standard myoglobin (Mb) assay was used. While stable in the dark, photoactivation with low-power UV light (365 nm) liberated CO from the encapsulated hexacarbonyl molecules in Mo(6.0)/UiO-66(Hf), leading to a maximum amount of 0.26 mmol CO released per gram of material. Under the simulated physiological conditions of the Mb assay (37 °C, pH 7.4 buffer), minimal leaching of molybdenum occurred, PXRD showed only slight amorphization, and FT-IR spectroscopy confirmed the high chemical stability of the MOF host.

An indirect CO2 utilization for the crystallization control of CaCO3 using alkylcarbonate

Carbon mineralization into calcium carbonate (CaCO3) has been widely studied as a promising CO2 resource utilization pathway. In this work, CO2 was fixed to alkylcarbonate through phase change absorption in polyethylene glycol 200 (PEG) plus ethanediamine (EDA) system at ambient conditions. This alkylcarbonate was identified by FTIR and 13C cross-polarization magic-angle spinning (CP-MAS) NMR spectra. It was used as both CO32− source and crystal modifier to induce crystallization of CaCO3 particles. The CaCO3 microsphere with uniform morphology and vaterite crystal phase was acquired by adjusting quality of alkylcarbonate, concentration of Ca2+ concentration, and crystallization period without any additives. Furthermore, a plausible self-assembly formation mechanism toward inducing crystallization of vaterite CaCO3 microsphere also was proposed. This synthesis strategy is environmentally friendly and offers an alternative strategy for indirect utilization of CO2.

Conversion of sub-µm calcium carbonate (calcite) particles to hollow hydroxyapatite agglomerates in K2HPO4 solutions

Abstract Sub-µm CaCO3 (calcite; CC) particles were converted to calcium monohydrogenphosphate dihydrate (DCPD) and hydroxyapatite (HAp) via soaking treatments in K2HPO4 solutions with varied pH (3–12) and concentrations (0.1–1.5 M) at 37°C for up to 10 days. DCPD was derived from the solutions with pH ≤ 6; while hollow HAp was yielded when pH ≥ 7 in assemblies of petal-like crystallites. Results of magic angle spinning (MAS) and cross-polarization magic angle spinning (CP-MAS) NMR studies have shown that the HAp lattice has only PO4 2− but no HPO4 2− at B (phosphate) sites. Trace amounts of CO3 2− have occupied both A (OH) and B (PO4) sites, and H2O is adsorbed on surface crystallites. The primary crystallite size of HAp derived from Scherrer equation increases quickly in a 12 h period and becomes gradually stable afterward. Samples of particles soaked within 3 h in a temperature range of 20–80°C were analyzed by X-ray diffraction. It is shown that the rate constant of 1 M solution is about an order of magnitude greater than that of 0.1 M solution and the apparent activation energy is 33 kJ/mol. In this work, the conversion of CC to HAp can be quantitatively controlled to solve the problem of slow degradation of HAp.

Efficient CO2 Sequestration by a Solid–Gas Reaction Enabled by Mechanochemistry: The Case of l-Lysine

This study describes an efficient and solvent-free method for the regioselective production of l-lysine ammonium ε-carbamate by ball-milling l-lysine under a CO2 atmosphere. The regioselective formation of l-lysine ammonium ε-carbamate via this mechanochemical approach was confirmed by a complete analytical study, including 1H → 13C and 1H → 15N cross polarization magic-angle spinning NMR measurements as well as liquid NMR analyses, powder X-ray diffraction measurements, thermal analyses, and elemental analyses. The time of milling, rotational speed, milling material, and liquid assistants were screened, while the reversibility of the process was assessed. The milling approach was compared with the synthesis in aqueous solutions and in the solid state without agitation. In addition to being regioselective, the synthesis by solvent-free mechanochemistry was found to be much faster than the other approaches while also producing less waste.

2-Mercaptopyrimidine-functionalized mesostructured silicas to develop electrochemical sensors for a rapid control of scopolamine in tea and herbal tea infusions

Mesostructured silicas were synthesized and chemically functionalized with a 2-mercaptopyrimidine (MPY)-derivative. Bare and functionalized silicas (MSU-2, HMS, SBA-15, MSU-2-MPY, HMS-MPY and SBA-15-MPY) were characterized by powder X-ray diffraction, nitrogen adsorption-desorption isotherms, transmission electron and scanning electron microscopy, 29Si and 13C cross-polarization magic-angle spinning NMR spectroscopy and elemental analysis, and used to prepare modified carbon paste electrodes (CPEs). The electrodes properties were studied using potassium ferrocyanide and scopolamine as probes employing cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Results proved that MPY groups on the silica surface were necessary to improve the sensitivity in the voltammetric determination of scopolamine. CPE modified with HMS-MPY exhibited higher peak current toward the oxidation of scopolamine, with a well-defined oxidation peak at + 1.1 V (vs. Ag/AgCl) in DPV. This fact can be attributed to the high electroactive area of this material, with 3 D wormhole-like channel structure that favored the scopolamine diffusion. Under optimum conditions, HMS-MPY-CPE exhibited a wider linearity range, from 0.9 to 200 μM, with a detection limit of 0.3 μM and good reproducibility by DPV. The developed sensor was successfully applied for a rapid determination of scopolamine in spiked tea and herbal tea infusion samples with good recoveries (between 83 ± 5 and 101 ± 1%).

Dynamic Covalent Synthesis of Crystalline Porous Graphitic Frameworks

Summary Porous graphitic framework (PGF) is a two-dimensional (2D) material that has emerging energy applications. An archetype contains stacked 2D layers, the structure of which features a fully annulated aromatic skeleton with embedded heteroatoms and periodic pores. Due to the lack of a rational approach in establishing in-plane order under mild synthetic conditions, the structural integrity of PGF has remained elusive and ultimately limited its material performance. Here, we report the discovery of the unusual dynamic character of the C=N bonds in the aromatic pyrazine ring system under basic aqueous conditions, which enables the successful synthesis of a crystalline porous nitrogenous graphitic framework with remarkable in-plane order, as evidenced by powder X-ray diffraction studies and direct visualization using high-resolution transmission electron microscopy. The crystalline framework displays superior performance as a cathode material for lithium-ion batteries, outperforming the amorphous counterparts in terms of capacity and cycle stability.

Synthesis of anionic ionic liquids@TpBd-(SO3)2 for the selective adsorption of cationic dyes with superior capacity.

The discharge of industrial printing and dyeing wastewater is one of the main reasons for the increasing water shortage and deterioration. The treatment of dyestuff wastewater is an issue and needs to be urgently solved. In this work, anionic ionic liquid functional covalent organic materials (COMs) were firstly synthesized and used for the selective adsorption of cationic dyes. First, a series of sulfonic acid group (SO3H)-functionalized anionic TpPa-SO3, TpBd-(SO3)2, and TpCR-(SO3)2 were prepared, respectively, and then imidazole was grafted onto TpBd-(SO3)2 to obtain ImI@TpBd-(SO3)2. The full characterization using X-ray diffraction, FT-IR spectroscopy, 13C cross-polarization magic-angle spinning NMR spectroscopy, zeta-potentials, BET surface and pore analysis indicated that these COMs and ImI@TpBd-(SO3)2 exhibited different morphologies, porosities, and potentials. The effects of the type of dye, adsorption time, initial dye concentration, and pH on the adsorption of dyes on ImI@TpBd-(SO3)2 were systematically investigated, respectively. The results revealed that ImI@TpBd-(SO3)2 possessed good adsorption performance for nine different cationic dyes with adsorption capacities in the range from 2865.3 mg g−1 for methylene blue (MB) to 597.9 mg g−1 for basic orange 2 (BO), but little adsorption for anionic and neutral dyes, revealing charge selectivity. The adsorption ratio of ImI@TpBd-(SO3)2 for MB was as high as 74.0% at 10 min by using 1.0 mg material, owing to the post modification of TpBd-(SO3)2 with imidazole. The adsorption of MB on ImI@TpBd-(SO3)2 was pH dependent. The adsorption isotherm and kinetics fitted well with the Freundlich and pseudo second-order kinetic model, respectively. Finally, the very outstanding advantages of superior selective adsorption, desorption, convenient preparation, and low density of ImI@TpBd-(SO3)2 predicted its research and application potential in dye wastewater recovery.