Cross-coupling Chemistry Research Articles

Electronic Effects of Bidentate P,N-Ligands on the Elementary Steps of Au(I)/Au(III) Reactions Relevant to Cross-Coupling Chemistry.

Oxidant-free Au(I)/Au(III)-catalyzed cross-coupling has been recently enabled by the use of bidentate P,N-ligands. To further develop these P,N-ligands, computational studies were performed to understand their effects on the oxidative addition of aryl iodide electrophiles with Au(I). Using this mechanistic understanding, six new electron-rich P,N-ligands were synthesized. The ligand exchange equilibrium and reductive elimination were then characterized by using a Au(III)-mediated S-arylation reaction. The results detailed herein provide new fundamental insights in Au(I)/Au(III) ligand design.

Carbon-Chalcogenide Cross-Coupling Reactions in Water

: Over the past two decades, researchers have witnessed the synthesis of diaryl sulfides and diaryl selenides via transition metals-mediated carbon-heteroatom cross-coupling reactions in the presence of various organic and inorganic solvents. The use of water as a clean and environmentally friendly solvent in cross-coupling chemistry of C-S/Se bond formations has attracted profound interest owing to its availability, non-toxicity, low cost and renewability. The most commonly used solvents have been recognized as being of environmental concern, but the use of green and eco-friendly solvents like water is frequently considered with respect to the recovery of catalysts, isolation of products, and recycling. The fundamental interactions between the water and the transition metal catalysts or ligands are viewed from mechanistic aspects, which mostly favours the rational selection of high-performance and safe solvents. In this article, the authors intended to focus extensively on the critical role of water in various transition metals mediated C-S/Se cross-coupling methodologies.

Introduction of Molecular Complexity via the Cross-Coupling of Lithium 1,4-Dioxene with Aryl Bromides.

The synthetic potential of substituted 1,4-dioxenes is well recognised, although the chemistry of 2-aryl-1,4-dioxenes is relatively unexplored. Their transition metal-catalysed synthesis has been limited to Stille-type cross-coupling chemistry, typically showing long reaction times, or proceeding at high reaction temperatures. Here we present a facile and general methodology for the cross-coupling of aryl bromides with lithium 1,4-dioxene, affording a range of 2-aryl-1,4-dioxenes in generally good yields. We highlight the synthetic applicability of this transformation at multigram scale, and demonstrate the versatility of the products by conversion of the dioxene units to various carbonyl-based functionalities. Additionally, we present a concise two-step synthesis of an arylated analogue to a known 1,4-dioxene-based antifungal agent.

Copper(0)-Catalyzed Reductive Coupling of Disulfurating Reagents and (Hetero)aryl/Alkyl Halides.

Herein, we reported a copper(0)-catalyzed reductive coupling of disulfurating reagents and (hetero)aryl/alkyl halides. Copper(0) can be directly inserted into tetrasulfide and then undergoes reductive coupling with (hetero)aryl Iodides to construct disulfide. The method features the unprecedented use of copper(0)-catalyzed disulfurating reagents (tetrasulfides) in cross-coupling chemistry and is convenient with broad substrate scopes, even applicable to different halogenated hydrocarbons. It is worth noting that the methodology is practical with the late-stage modification of bioactive scaffolds of pharmaceuticals. In the meantime, the synthesis of disulfides is successfully achieved on a gram scale, indicating the approach is highly valuable.

(NHC)Pd(OAc)2]: Highly Active Carboxylate Pd(II)-NHC (NHC = N-Heterocyclic Carbene) Precatalysts for Suzuki-Miyaura and Buchwald-Hartwig Cross-Coupling of Amides by N-C(O) Activation.

In the past eight years, the selective cross-coupling of amides by N-C(O) bond activation has emerged as a highly attractive manifold for the manipulation of traditionally unreactive amide bonds. In this Special Issue on Next-Generation Cross-Coupling Chemistry, we report the Suzuki-Miyaura and Buchwald-Hartwig cross-coupling of amides by selective N-C(O) cleavage catalyzed by bench-stable, well-defined carboxylate Pd(II)-NHC (NHC = N-heterocyclic carbene) catalysts {[(NHC)Pd(O2CR)2]}. This class of Pd(II)-NHCs promotes cross-coupling under exceedingly mild room-temperature conditions owing to the facile dissociation of the carboxylate ligands to form the active complex. These readily accessible Pd(II)-NHC precatalysts show excellent functional group tolerance and are compatible with a broad range of amide activating groups. Considering the mild conditions for the cross-coupling and the facile access to carboxylate Pd(II)-NHC complexes, we anticipate that this class of bench-stable complexes will find wide application in the activation of amide N-C(O) and related acyl X-C(O) bonds.

A Bimolecular Homolytic Substitution-Enabled Platform for Multicomponent Cross-Coupling of Unactivated Alkenes.

The construction of C(sp3)-C(sp3) bonds remains one of the most difficult challenges in cross-coupling chemistry. Here, we report a photoredox/nickel dual catalytic approach that enables the simultaneous formation of two C(sp3)-C(sp3) linkages via trimolecular cross-coupling of alkenes with alkyl halides and hypervalent iodine-based reagents. The reaction harnesses a bimolecular homolytic substitution (SH2) mechanism and chemoselective halogen-atom transfer (XAT) to orchestrate the regioselective addition of electrophilic and nucleophilic alkyl radicals across unactivated alkenes without the need for a directing auxiliary. Utility is highlighted through late-stage (fluoro)alkylation and (trideutero)methylation of C═C bonds bearing different substitution patterns, offering straightforward access to drug-like molecules comprising sp3-hybridized carbon scaffolds.

Synthesis of Mono-, Di-, Tri-, and Tetra-cationic Pyridinium and Vinylpyridinium Modified [2.2]Paracyclophanes: Modular Receptors for Supramolecular Systems.

In this report, a new series of mono-, di-, tri-, and tetra-cationic pyridinium and vinyl pyridinium-modified [2.2]paracyclophanes as useful molecular tectons for supramolecular systems are described. Regioselective functionalization at specific positions, followed by resolution step and successive transformations through Pd-catalyzed Suzuki-Miyaura and Mizoroki-Heck cross-coupling chemistry furnish a series of modular PCP scaffolds. In our proof-of-concept study, on N-methylation, the PCPs bearing (cationic) pyridyl functionalities were demonstrated as useful molecular receptors in host-guest supramolecular assays. The PCPs on grafting with light-responsive azobenzene (-N=N-) functional core as side-groups impart photosensitivity that can be remotely transformed on irradiation, offering photo-controlled smart molecular functions. Furthermore, the symmetrical PCPs bearing bi-, and tetra-pyridyl functionalities at the peripheries have enormous potential to serve as ditopic and tetratopic 3D molecular tectons for engineering non-covalent supramolecular assemblies with new structural and functional attributes.

Alkene dialkylation by triple radical sorting.

The development of bimolecular homolytic substitution (SH2) catalysis has expanded cross-coupling chemistries by enabling the selective combination of any primary radical with any secondary or tertiary radical through a radical sorting mechanism1-8. Biomimetic9,10 SH2 catalysis can be used to merge common feedstock chemicals-such as alcohols, acids and halides-in various permutations for the construction of a single C(sp3)-C(sp3) bond. The ability to sort these two distinct radicals across commercially available alkenes in a three-component manner would enable the simultaneous construction of two C(sp3)-C(sp3) bonds, greatly accelerating access to complex molecules and drug-like chemical space11. However, the simultaneous in situ formation of electrophilic and primary nucleophilic radicals in the presence of unactivated alkenes is problematic, typically leading to statistical radical recombination, hydrogen atom transfer, disproportionation and other deleterious pathways12,13. Here we report the use of bimolecular homolytic substitution catalysis to sort an electrophilic radical and a nucleophilic radical across an unactivated alkene. This reaction involves the in situ formation of three distinct radical species, which are then differentiated by size and electronics, allowing for regioselective formation of the desired dialkylated products. This work accelerates access to pharmaceutically relevant C(sp3)-rich molecules and defines a distinct mechanistic approach for alkene dialkylation.

Uncommon building blocks in liquid crystals

ABSTRACT Just as nematic liquid crystals are widespread in display technology, a small number of building blocks find widespread use in the design and synthesis of liquid crystalline materials. This review explores the intricate relationship between the molecular structure of thermotropic liquid crystals (LCs) and their phase behaviour, emphasising the role of specific structural fragments in determining LC properties. We also detail into the impact of non-conventional building blocks on LC properties by comparing families of materials differentiated by only a single structural variation, allowing us to probe the extent to which deviations from traditional structures can maintain liquid crystallinity. This comprehensive overview not only underscores the importance of specific molecular fragments in LC design but also opens avenues for the innovative use of non-traditional building blocks in the development of new LC materials. Just as the ubiquity of 1,4-disubstituted benzene rings has its genesis (partly) in the extremely robust and predictable synthesis of such systems through cross-coupling chemistry; we consider that, the rapid progress in coupling sp3 fragments, coupled with the growing availability of suitable building blocks, makes the inclusion of said fragments ever more practical and attractive for use in liquid crystalline systems.

A Platform for the Synthesis of Oxidation Products of Bilirubin.

Bilirubin is the principal product of heme catabolism. High concentrations of the pigment are neurotoxic, yet slightly elevated levels are beneficial. Being a potent antioxidant, oxidative transformations of bilirubin occur in vivo and lead to various oxidized fragments. The mechanisms of their formation, intrinsic biological activities, and potential roles in human pathophysiology are poorly understood. Degradation methods have been used to obtain samples of bilirubin oxidation products for research. Here, we report a complementary, fully synthetic method of preparation. Our strategy leverages repeating substitution patterns in the parent tetracyclic pigment. Functionalized ready-to-couple γ-lactone, γ-lactam, and pyrrole monocyclic building blocks were designed and efficiently synthesized. Subsequent modular combinations, supported by metal-catalyzed borylation and cross-coupling chemistries, translated into the concise assembly of the structurally diverse bilirubin oxidation products (BOXes, propentdyopents, and biopyrrins). The discovery of a new photoisomer of biopyrrin A named lumipyrrin is reported. Synthetic bilirubin oxidation products made available in sufficient purity and quantity will support future in vitro and in vivo investigations.

Copper Single Atoms Chelated on Ligand-Modified Carbon for Ullmann-type C-O Coupling.

Cross-coupling reactions are of great importance in chemistry due to their ability to facilitate the construction of complex organic molecules. Among these reactions, the Ullmann-type C-O coupling between phenols and aryl halides is particularly noteworthy and useful for preparing diarylethers. However, this reaction typically relies on homogeneous catalysts that rapidly deactivate under harsh reaction conditions. In this study, we introduce a novel heterogeneous catalyst for the Ullmann-type C-O coupling reaction, comprised of isolated Cu atoms chelated to a tetraethylenepentamine-pyrrole ligand that is immobilized on graphite nanoplatelets. The catalytic study reveals the recyclability of the material, and demonstrates the crucial role of the pyrrole linker in stabilizing the Cu sites. The work expands the potential of single-atom catalyst nanoarchitectures and underscores the significance of ligands in stabilizing metals in cationic forms, providing a novel, tailored catalyst for cross-coupling chemistries.

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps.

Pyrazoles are rarely found in nature but are traditionally used in the agrochemical and pharmaceutical industries, while other areas of use are also actively developing. However, they have also found numerous other applications. The search for new and efficient syntheses of these heterocycles is therefore highly relevant. The modular concept of multicomponent reactions (MCR) has paved a broad alley to heteroaromatics. The advantages over traditional methods are the broader scope and increased efficiency of these reactions. In particular, traditional multistep syntheses of pyrazoles have considerably been extended by MCR. Progress has been made in the cyclocondensation of 1,3-dielectrophiles that are generated in situ. Limitations in the regioselectivity of cyclocondensation with 1,3-dicarbonyls were overcome by the addition-cyclocondensation of α,β-unsaturated ketones. Embedding 1,3-dipolar cycloadditions into a one-pot process has additionally been developed for concise syntheses of pyrazoles. The MCR strategy also allows for concatenating classical condensation-based methodology with modern cross-coupling and radical chemistry, as well as providing versatile synthetic approaches to pyrazoles. This overview summarizes the most important MCR syntheses of pyrazoles based on ring-forming sequences in a flashlight fashion.

The development of cage phosphine ‘DalPhos’ ligands to enable nickel-catalyzed cross-couplings of (hetero)aryl electrophiles

The development of the DalPhos cage ligand family and application in developing state-of-the-art nickel-catalyzed cross-coupling chemistry is described.

Triphenylene discotic liquid crystals: biphenyls, synthesis, and the search for nematic systems

ABSTRACT The development of the cyanobiphenyls for display applications was one of the most important technological advances of the 20th century. Here, we present a personal account of how advances in biphenyl science (synthesis and application) influenced the development of discotic liquid crystals. We focus on those based on triphenylene, the most widely studied discotic core. The search for nematic discotics proved to be challenging with relatively few early examples being reported. In examples of symmetrically hexasubstituted triphenylenes, a ring of peripheral aryl ester or alkynylaryl substituents provides effective steric blocking to columnar assembly – the face-to-face molecular arrangement that is observed in the majority of triphenylene discotics. The synthetic challenges associated with early triphenylene synthesis have now been largely overcome. Efficient oxidative trimerisation of dialkoxybenzenes gave direct access to materials with high purity and at scale. The intermediates can be manipulated through deprotection and elaboration, a pathway that allowed synthesis of lyotropic (Nc) systems among others. The combination of modern cross-coupling chemistry with oxidative processes has proved versatile, leading to synthesis of unsymmetrical monomeric and dimeric systems. Dimeric systems linked by rigid bridges have been identified as a separate class of materials that show strong tendency for nematic mesophase formation.

Four-layer folding framework: design, GAP synthesis, and aggregation-induced emission.

The design and synthesis of a type of [1 + 4 + 2] four-layer framework have been conducted by taking advantage of Suzuki-Miyaura cross-coupling and group-assisted purification (GAP) chemistry. The optimized coupling of double-layer diboronic esters with 1-bromo-naphth-2-yl phosphine oxides resulted in a series of multilayer folding targets, showing a broad scope of substrates and moderate to excellent yields. The final products were purified using group-assisted purification chemistry/technology, achieved simply by washing crude products with 95% EtOH without the use of chromatography and recrystallization. The structures were fully characterized and assigned by performing X-ray crystallographic analysis. UV-vis absorption, photoluminescence (PL), and aggregation-induced emission (AIE) were studied for the resulting multilayer folding products.

Nickel-Catalyzed Amination of Alkyl Electrophiles.

Bimolecular nucleophilic substitution SN2 is the earliest and most important means of amination of alkyl electrophiles; its practical utilization is largely limited to primary or activated substrates. Furthermore, a persistent challenge lies in establishing C(sp3)-N bonds from alkyl substrates in cross-coupling chemistry using palladium and nickel catalysts. Therefore, the methods of constructing C(sp3)-N bonds remain rare from alkyl electrophiles. The existing routes are limited to copper catalysis and photoredox catalysis. Here, we demonstrate an alternative amination strategy for rapid construction of C(sp3)-N bonds from accessible alkyl electrophiles, which were used as radical precursors under nickel catalysis by Ni (III) species reductive eliminations in high efficiency.

Diversification of Glycosyl Compounds via Glycosyl Radicals.

Glycosyl radical functionalization is one of the central topics in synthetic carbohydrate chemistry. Recent advances in metal-catalyzed cross-coupling chemistry and metallaphotoredox catalysis provided powerful platforms for glycosyl radical diversification. In particular, the discovery of new glycosyl radical precursors in conjunction with these advanced reaction technologies have significantly expanded the space for glycosyl compound synthesis. In this Minireview, we highlight the most recent progress in this area starting from 2021, and the reports included will be categorized based on different reaction types for better clarity.

A Universal Organocatalyst for Selective Mono-, Di-, and Triboration of Terminal Alkynes

Multiboronate compounds are valuable synthetic building blocks for the construction of complex organic architectures via cross-coupling chemistry at the C–B bonds. Hence, there has been a tremendous amount of work in the past decades to develop practical multiboration reactions. Many of the developed methods start from alkynes, the most versatile synthetic precursors for multiboronates, and use transition-metal complexes as catalysts. However, several drawbacks such as low efficiency, poor selectivity, and narrow substrate and catalyst scopes remain major challenges to be addressed in this research area. Herein, we report the development of a universal organocatalytic system to promote the mono-, di-, and triboration of terminal alkynes in a highly efficient and selective manner. The reaction outcomes can be manipulated at will by varying the catalyst loading, reagent stoichiometry, and reaction time. A combined computational and experimental mechanistic study offers interesting insights into the selectivity of these sequential reactions.

Photoinduced Palladium-Catalyzed 1,2-Difunctionalization of Electron-Rich Olefins via a Reductive Radical-Polar Crossover Reaction

Palladium-catalyzed cross-coupling reactions belong to the most important transformations for the construction of C–C or C-heteroatom bonds. More recently, the photochemical activation of palladium complexes emerged as a key strategy to leverage palladium catalysis at room temperature beyond the scope of conventional cross-coupling chemistry. Herein, we report on the photoinduced palladium-catalyzed 1,2-difunctionalization reaction of electron-rich olefins. Mechanistic experiments and computational studies reveal that this reaction proceeds via the addition of an alkyl radical, followed by the oxidation of a radical intermediate to access carbocation intermediates, which are inaccessible via classic thermal reaction conditions. The carbocation can then be applied to a variety of secondary C–C or C–N bond-forming reactions. This strategy now allows a general approach toward densely functionalized unsymmetric 1,1-bis(heterocyclyl)alkanes.

Aiming for More Sustainable Cross-Coupling Chemistry by Employing Single-Atom Catalysis on Scale.

Scaling up syntheses from mg to kg quantities is a complex endeavor. Besides adapting laboratory protocols to industrial processes and equipment and thorough safety assessments, much attention is paid to the reduction of the process' environmental impact. For processes including transition metal catalyzed steps, e.g. cross-coupling chemistry, this impact strongly depends on the identity of the metal used. As such, a key approach is the replacement of single-use with reusable heterogeneous catalysts. Transition metal single-atom heterogeneous catalysts (SAC), a novel class of catalytic materials, might exhibit all the necessary properties to step up to this task. This article shall discuss current applications of SAC in cross-coupling chemistry from the point of a process chemist and shed light on the NCCR Catalysis contribution to the field. Investigations of the stability-activity-selectivity relationship of SACs in combination with early-stage life-cycle assessments (LCA) of potential processes lay the foundation for large-scale application tailored catalyst synthesis. Ultimately, prevailing challenges are highlighted, which need to be addressed in future research.