Crevasse Splay Deposits Research Articles

VERTEBRATE PALEOBURROW AS A SEASONALITY INDICATOR IN EARLY CRETACEOUS TRÊS BARRAS FORMATION (BRAZIL)

Vertebrate burrows serve as windows into the past, revealing the activities of various organisms and providing clues about their paleoenvironmental conditions. This study focuses on a vertebrate paleoburrow from the Três Barras Formation, Minas Gerais state, southeastern Brazil, aiming to detail and reconstruct aspects of the paleoclimatic conditions that acted in this area during the early Cretaceous within a predominantly eolian paleoenvironment. Through detailed analysis of the sedimentary facies and morphological examination of the burrow, this study suggests that the structure was likely produced by lungfish or lizards. It is located within proximal crevasse splay deposits interbedded with fine floodplain sediments, indicating periods of flooding in a meandering fluvial setting that developed in the marginal areas of the eolian system of the Três Barras Formation. Comparison with other paleoburrows from neighboring basins further enhances our understanding of the paleoenvironmental conditions during the early Cretaceous Period. These findings reinforce evidence of seasonality and suggest a period of intense humidity during the deposition of the Três Barras Formation, which had previously been interpreted as exclusively aeolian.

Palynological variability within the Permian (Changhsingian) Umm Irna Formation (Jordan): implications for biostratigraphy and fluid-flow character in alluvial formations

The Permian (Changhsingian) Umm Irna Formation (Jordan) yields important plant fossils that have influenced our understanding of the early evolution of plants that later dominated the vegetation of the Mesozoic. The formation was deposited in a fluvial regime characterised by the co-occurrence of stacked small-scale braided channels and of larger, higher-sinuosity channels with deposition on point bars, all intercalated into a heterogeneous background sedimentation of finer-grained floodplain deposits, including stacked crevasse-splay deposits, interspersed abandoned-channel and oxbow-lake fills, and lenses of peaty back-swamp deposits. Here, we document the remarkable compositional variability expressed in 124 palynomorph assemblages that were recovered from different argillaceous deposits in the Umm Irna Formation within a ∼2 km2 outcrop area around a major meandering channel. Our results reveal lateral and vertical variation within individual argillaceous units, as well as lateral variation between different argillaceous units in the same sedimentary complex at similar stratigraphic levels. When combined with plant macrofossil data, the results show that variability in the palynological content may be influenced mainly by two factors. The first is connectedness to the major channel; the drainage system carried a mixture of palynomorphs from across the floodplain but also from a large hinterland of tributaries draining higher parts of the floodplain and uplands beyond to the south and east. The second is the influence of local vegetation communities on the floodplain which would likely be more marked in less connected parts of the floodplain. These findings have implications for the palynological study of alluvial sequences of the Palaeozoic and Mesozoic, and for understanding the ability to identify mudstone units via palynological fingerprinting. Such individual units are of great importance as baffles to fluid flow in reservoirs that might be used for oil and gas, low-temperature geothermal energy storage, carbon capture and storage, and hydrogen storage in alluvial successions.

Flume experiments in the development of crevasse-splay deposits: transition from asymmetric to symmetric geometry

Abstract Crevasse-splay deposits play an important role in the reconstruction of the magnitude of past flood events and in understanding the behavior of river systems. Despite the extensive studies conducted on the geometry and facies of crevasse-splay deposits, their spatiotemporal developmental processes have remained insufficiently understood. In this study, scaled flume experiments were conducted to study the relationship between the developmental processes of crevasse splays and their characteristics. An experimental flume was set up in a tank to simulate the 2019 Chikuma River flooding event in central Japan. To model the overbank flow, an opening was created on the side of the flume’s wall through which the flow flooded onto a horizontal acrylic plate. The sediment used in the experiments consisted of particles with grain sizes of approximately 0.3 and 0.1 mm, which were determined to be equivalent to bedload gravel and suspended sand in a real-scale river using dimensional analysis. The results of the experiments revealed three important findings: 1) Crevasse-splay deposits initially developed an asymmetric shape extending downstream of the main river channel but gradually showed a symmetric geometry. The river mainstream initially influenced the direction of the inundation flow, but channel bifurcations after the deposition of the sediment piles later changed the geometry of splays into a more symmetric shape. 2) Crevasse-splay deposits developed in two distinct regions (proximal and distal splay), corresponding to sediment transport by bedload and suspended load, respectively. These two regions are commonly observed in the actual field scale. 3) The original overbank flow was a sheet flow without channels, which caused coarse-grained sediments to be spread over a wide area. Subsequently, the accumulation of coarse sands in the developed channel interiors resulted in the buildup of finer-grained sediments upstream of the proximal splay. Thus, the proximal splay deposits became slightly coarse downstream, whereas they rapidly became fine at the boundary with the distal splay. These findings indicate that the characteristics of crevasse-splay deposits vary with the landform’s development stage, thus providing a basis for interpreting their depositional facies.

Imaging Subsurface Channels within the Tertiary Niger Delta Basin using Spectral Decomposition Methods

Abstract Channels are hydrocarbon prospective areas which are often below the resolution of seismic data. This study was therefore conducted with the aim of using spectral decomposition methods for imaging of buried channels and associated structures in a 3D Post-Stack Depth Migrated (PSDM) volume acquired from a field in the Niger Delta Basin. Two commonly used spectral decomposition methods were used to enhance the resolution of seismic data for interpretation. The methods utilized included Fast Fourier Transform (FFT) and Continuous Wavelet Transform (CWT). Petrel and Opendtect were the interpretational software tools utilized for the study. The seismic data was conditioned using structural smoothing, and a zone of interest was selected around -1000 to -3000ms. Three dominant frequencies were selected from the sub-volume generated around the zone of interest. The frequencies were 10Hz, 25Hz and 32Hz respectively. These frequencies were extracted from the seismic data using FFT and CWT decomposition methods. The results were colored using Red, Green and Blue (Red for 10Hz, Green for 25Hz and Blue for 32Hz). These frequencies were then blended together in a process called RGB blending. The resultant output was a mix of only these three dominant frequencies. Analysis of these results revealed the presence of several channels, crevasse splay deposits, flood-plains and faults on two time-slices obtained at -2020ms and -1800ms. The channels were meandering channels of low sinuosity, some of which were fault controlled. The crevasse splay deposits were significantly large and increased in number at the shallow time-slice. Some of the crevasse splay deposits were found bifurcating fault lines and being deposited on floodplains, indicating that they were younger than the faults. Channel flow direction was from East to West, while channel migration was from South to North of the study area. The increase in the number of channels from the base to the top of the seismic data suggested a multistory stacked channel system. It was established that channels and crevasse splays were best enhanced using the FFT decomposition method while major and minor faults were best enhanced using CWT method. Hence, this study has proven that the spectral decomposition method is very effective in imaging subsurface buried channels, thus delineating prospects and can be used for reservoir characterization. Keywords: Spectral decomposition, Fast Fourier Transform (FFT), Continuous Wavelet Transform (CWT), Channels, Crevasse splays, Faults, Reservoir Characterization.

A new vertebrate ichnological association sheds light on the small metatherian record of the Middle Miocene in South America

Vertebrate ichnological associations recorded in Middle Miocene successions were unknown in South America. During that time, South America was isolated from other continents and had a unique endemic fauna and flora. The lower Vinchina succession occurred between 15.6 and 12.7 Ma and records the footprints of highly specialized mammals, reptiles, and birds for the first time. To identify all footprint producers, we focused on anatomical traits of the appendicular skeleton represented on the footprints together with body size estimations of the producers as body mass and the apparent trunk length (GAD). Carnivoripeda sudamericana nov. isp. reveals a weasel-like producer of ∼1 kg and a trunk length of 19–26 cm most likely attributed to metatherian carnivores (Sparassodonta). They represent the oldest carnivore footprints in South America. Small bipedal rodent-like mammals of ∼280 g using a jumping gait (Morphotype A) are interpreted as produced by highly specialized South American marsupials, argyrolagids, whose footprints were unknown until now. Other mammalian footprints recorded are Tacheria troyana most likely produced by dinomyid caviomorph rodents. They represent animals of ∼16 kg and a trunk length of 48–55 cm, like living dinomyids. Subcircular to oval structures (Morphotype B) seems to be produced by medium-sized ungulates, while stepping in cohesive and plastic soupy sediments. cf. Chelonipus torquatus suggests small freshwater turtles (Chelidae or Podocnemididae), of ∼400 g consistent with a trackmaker of carapace size of ∼9 cm. Aviadactyla vialovi was most likely produced by a small shorebird (Scopolacidae) of ∼40 g. All footprints are preserved on crevasse splay deposits of anastomosing fluvial systems together with meniscate feeding (Taenidium barretti) and simple dwelling trace fossils (Palaeophycus tubularis) produced by insects and are an example of the Scoyenia Ichnofacies.

Features of crevasse splay deposits and sedimentary processes associated with levee breaching due to the October 2019 flood of the Chikuma River, Central Japan

Features of crevasse splay deposits and sedimentary processes associated with levee breaching due to the October 2019 flood of the Chikuma River, Central Japan

Flow depth estimates and avulsion behaviour in alluvial stratigraphy (Willwood Formation, Bighorn Basin, Wyoming, USA)

AbstractThe size and geometry of river channels play a central role in sediment transport and the character of deposition within alluvial basins across spatiotemporal scales spanning the initiation of grain movement to the filling of accommodation generated by subsidence. This study compares several different approaches to estimating palaeoflow depths from fluvial deposits in the early Palaeogene Willwood Formation of north‐west Wyoming, USA. Fluvial story heights (n = 60) and mud plug thicknesses (n = 13) are statistically indistinguishable from one another and yield palaeoflow depth estimates of 4 to 6 m. The vertical relief on bar clinoforms (n = 112) yields smaller flow depths, by a factor of ca 0.3, with the exception that the largest bar clinoforms match story heights and mud plug estimates. This observation is consistent with modern river data sets that indicate unit bar clinoforms do not capture the reach‐mean bank‐full flow depths except in rare circumstances. Future studies should use story heights (i.e. compound bar deposits) and mud plugs to estimate bank‐full flow depths in alluvial strata. Additionally, the thickness of multi‐storied fluvial sandbodies (n = 102) and overbank cycles composed of paired crevasse splay and palaeosol deposits (n = 45) were compared. The two depositional units display statistically indistinguishable mean and median values. Building upon previous depositional models, these observations suggest basin rivers aggraded approximately one flow depth prior to major avulsion. This avulsion process generated widespread crevasse splay deposition across the floodplain. Once the main river channel stem was reestablished, overbank flooding and palaeosol development dominated floodplain settings. The depositional model implies river aggradation autogenically generated topography in the basin that was effectively filled during the subsequent avulsion. This constitutes a meso‐timescale (103–104 years) compensational pattern driven by morphodynamics that may account for the high completeness of fossil and palaeoclimate records recovered from the basin.

Accumulation of thick fluvial sediments in the Shinano River incised-valley fills: implications for sequence stratigraphy and alluvial architecture

ABSTRACTThe relationship between fluvial systems and base-level changes, controlled mainly by sea-level fluctuations and tectonic activity, on time scales of 103–104 years, is important for evaluating and improving nonmarine sequence stratigraphy and numerical and physical alluvial architecture models. However, there are not enough quantitative data available from field studies, especially for periods of rapid base-level rise. The Echigo Plain, Japan, is a fluvial–coastal lowland where the tidal range is very small and where a very deep valley was incised by the Shinano River during the latest Pleistocene. The depth of the incised valley near the shoreline, 160 m below mean sea level, is greater than the amount of sea-level fall during the Last Glacial Maximum (LGM) because of tectonic subsidence. We studied an approximately 100-m-long borehole sediment core obtained from the landward part of the plain, where thick fluvial deposits have accumulated since the LGM. Sediment facies, diatom assemblages, sulfur content, carbon to sulfur ratios, and radiocarbon age dates indicate that most of the core sediments were deposited in a fluvial environment during the past 12 kyr. Sediment accumulation rates were 10–15 m/kyr between 12 and 8 cal kyr BP, and relatively low (less than 5 m/kyr) subsequently, mainly because of glacio-eustatic sea-level rise. The timing of the reduction in the accumulation rate is one possible indicator of the position of the maximum-flooding surface in a sequence composed only of fluvial sediments. The presence of many thin layers of very fine to fine-grained sand (20–80 cm thick), interpreted as crevasse-splay deposits, that formed between 11 and 8 cal kyr BP, when the base level was rising rapidly, implies that crevasse-splay deposits are characteristic of aggrading fluvial sediments and the transgressive systems tract in nonmarine sequence stratigraphy. Tectonic subsidence at approximately 2 m/kyr has contributed markedly to the larger accumulation rate of fluvial sediments of the highstand systems tract on the Echigo Plain, compared with rates in other fluvial–coastal lowlands, since 5–6 cal kyr BP, when the eustatic sea-level rise had mostly ceased.

Litologie a paleopůdy klikovského souvrství ve vrtu 2140 01T1 Dunajovice, třebonská pánev

The 2140 01T1 borehole sampling the Late Cretaceous non-marine strata of the Klikov Formation in the central part of the Třeboň Basin in southern Bohemia provided ~ 70 m thick alluvial succession composed of alternating sandstone and mudstone intervals that overlays deeply weathered crystalline basement. The mudstone interval in the lower part of the Klikov Formation is separated by sandy layers into several 2–4 m thick fining-upward units. The sharp-based sandy layers with fusain, carbonized stems and rip-up clasts of underlying mudstone are interpreted as avulsion deposits. They grade upwards into heterolithic sand-silt sequence and mottled massive mudstone with burrows, rhizohalos and variably developed pedogenic features. Such cyclic arrangement probably reflects autogenic processes on distal floodplain with episodic deposition and upward increasing subaerial exposition and pedogenic overprint. In the middle to upper parts of the Klikov Formation up to 6 m thick channel sandbodies with sharp erosional bases cutting into the underlying laminated sand-silt heteroliths of channel levee deposits occur. The thickness of the single-storey sandbodies corresponds usually to c. 2 m which suggests up to 3 m deep channels during bankfull discharge. The thicker multi-storey sandbodies record channel amalgamation on the alluvial ridge or shallow paleovalley fillings. The sandbodies grade upwards to massive mudstones of abandoned channel fills and floodplain deposits. These floodplain units are up to 8 m thick and consist of variegated massive mudstones interrupted by discrete up to 1 m thick fining upward layers of rippled sandstone representing crevasse splay deposits. Depositional context including preserved levee deposits, abandoned channel fillings and floodplain finegrained deposits suggests rather higher sinuosity of the formative rivers. Palaeosol profiles represent pedogenically modified floodplain fines with gradational bases and sharp erosive top surfaces. At least 10 palaeosols were identified in the measured section, forming mostly discrete profiles up to 2 m thick consisting of several B-horizons that differ in the degree of the soil structure development, colour, mottling, grain size, presence of clay hypocoatings and bioturbation index. The most common Bw horizons form lower parts of the profiles and have no or only a weakly developed angular blocky structure (ABS). The typical mottling is caused by a hierarchical system of vermicular greenish-grey reduction rhizohalos, that may be filled by silt to sand or illuviated clay hypocoatings and probably follow the original plant root system. Some patches have diffuse orange rims of iron oxides, probably represented by goethite. Mudstone of Bsst horizons displays well-developed ABS with rare wedge-shaped peds and contains a number of illuviated clay skins and redox depletions. Vertic features like fine cracks filled by sand are common, and slickensides with clay hypocoatings occur rarely. Mudstones of Bt horizons contain a number of illuviated clay hypocoatings filling root channels or interpedal cracks, while the Bss horizons exhibit well-developed ABS with slickensides and contain a number of vertical cracks filled by sandy grains. Palaeosol profiles represent mainly argillisols and vertic argillisols with transitions to argillic vertisols. Poorly developed argillic to vertic protosols are also common. Palaeosol profiles differ mainly in the degree of structural development/maturity, which is given by various lengths of exposition to similar climatic conditions. Vertical distribution of palaeosols reflects their position in the alluvial landscape with locally specific hydromorphic conditions rather than a distinct climatic trend. Most of palaeosols exhibits downprofile translocation of clay (illuviation) leading to the formation of argillic horizon, which typically develop on stabilized landscape in humid climate with seasonal moisture deficit.

Invertebrate trace fossils from Paleogene fluvial strata in Western Washington, USA

Fluvial strata in the Paleogene Chuckanut Formation contain a wealth of trace fossils that include both vertebrate and invertebrate ichnofossils. Vertebrate traces have received careful scrutiny, but invertebrate traces have not previously been described. Trace fossils occur in two sediment types. Mudstones deposited in subaqueous environments include highly bioturbated layers that are dominated by horizontal meniscate burrows. Siltstone and fine-grained sandstone beds primarily contain vermiform trails on bedding surfaces, with sparse vertical traces. Some of these sandy beds also contain vertebrate tracks. Chuckanut Formation beds commonly show rapid facies changes in sediments that were deposited along a meandering river during a time of semitropical climate. Transitions from subaqueous to subaerial conditions may have been related to changing water levels caused by variations in seasonal precipitation or episodic flood events. Other possible factors include ponds created by abandonment of channels, overbank sediment s deposited by floods, and breaching of levees to form crevasse splay deposits. Trace fossil assemblages show local variations in the diverse depositional environments of the Chuckanut Formation. Many of the ichnofossil suites clearly represent Scoyenia Ichnofacies, but some occurrences may involve overprinting of Scoyenia and Mermia ichnofacies.

Quantitative analysis of crevasse-splay systems from modern fluvial settings

ABSTRACTAlthough crevasse splays are a common constituent of many fluvial and fluvio-deltaic systems, they remain less well understood than the channel deposits in those settings, especially with respect to controls on their occurrence, distribution, and geometry. The current study aims to redress this balance and investigate controls on 1) splay formation and occurrence and 2) splay size and geometry. The study has used Google Earth-based satellite imagery to examine crevasse-splay deposits from eight modern fluvial systems. A total of 1556 crevasse splays were identified using imagery from 1984 to 2020. Most of the splays (c. 70%) occur on the outer sinuous river bank with offtake angles ranging from 10° to 140° (mean 75°) to the channel flow direction. Three different types of splays have been identified: i) single crevasse splays, ii) laterally amalgamated crevasse splays, and iii) crevasse-splay complexes. The areal extent of splay bodies varies widely and ranges from less than 1 km2 up to 221 km2. The single crevasse splays are the primary and smallest form of splay, with an average area of 0.61 km2. Compensational stacking or progradation significantly increase the splay area and form laterally amalgamated splays and splay complexes, respectively. The average areal extent of laterally amalgamated splays is 1.33 km2, and of splay complexes, 39 km2.The climate, discharge, floodplain morphology, vegetation, trunk channel slope, sinuosity, and sediment load primarily control the occurrence, geometry, and dimensions of crevasse splays. Results demonstrate that sparse or no floodplain vegetation favors the formation of elongated tongue-shaped crevasse splays while densely vegetated floodplains produce more lobate splays. The highest splay frequency occurs in systems where the river experiences sudden high magnitude variation in discharge, has a low cross-sectional area, and noncohesive bank materials. Larger splay size is correlated with lower river slope angles and higher sinuosity, discharge, and floodplain relief. Channel size has little influence on the extent of splays. This work suggests that autogenic factors such as trunk-channel slope and sinuosity are more influential in arid–semiarid settings while allogenic factors such as discharge are important in temperate–equatorial settings.

Ichnodiversity and facies of Triassic red beds in the Irohalene area (Argana Basin, Western High Atlas, Morocco): implications for palaeoenvironment

ABSTRACT From Middle-Late Triassic continental deposits of the Timezgadiouine Formation (Argana Basin, Morocco), 17 lithofacies are identified, with alluvial fan, fluvial, floodplain and lacustrine associations. Invertebrate traces include Archaeonassa fossulata, Arenicolites isp., cf. Arenituba, Beaconites isp., cf. Camborygma, Cruziana problematica, Diplocraterion isp., Fuersichnus isp., Helminthoidichnites tenuis, Lockeia isp., Palaeophycus striatus, Palaeophycus tubularis, Planolites isp., Rusophycus carbonarius, Scoyenia gracilis, Skolithos isp., Spongeliomorpha carlsbergi, Taenidium isp. and Taenidium barretti. Additionally, rhizoliths were observed. Six ichnoassemblages were distinguished: overbank facies with (1) Rhizolith ichnoassemblage in a low-energy floodplain environment and (2) Scoyenia-Palaeophycus ichnoassemblage in crevasse splay deposits. The fluvial ichnoassociation is of moderate ichnodiversity consisting of the following assemblages: (3) Arenicolites, developed under higher flow velocities of active channels, (4) Taenidium-Scoyenia, formed by the colonisation of inactive channels, (5) Arenicolites-horizontal meniscate burrows, reflecting a rapid transition between active and abandoned channels and (6) Lockeia-vertebrate footprint, formed in littoral lakes. The Aglegal and Irohalene members indicate climatic shifts between arid dry, semiarid and subhumid in a dryland river environment. The sudden onset and the high frequency of lacustrine deposits in the lower Irohalene Member point to a rapid climate change from dry to intermittent wet and dry. This change is discussed in terms of the Carnian Pluvial Event.

Alluvial ichnofacies from Upper Triassic red beds in India: Implications for palaeoenvironment and palaeoclimate

Trace fossils are highly sensitive to the hydrodynamic conditions of depositional systems, substrate, and climate and hence yield information about spatio-temporal changes in palaeoenvironment and palaeoclimate. In this paper, we report alluvial trace fossil assemblages from the Upper Triassic Tiki Formation of the Rewa Basin, central India. Based on detailed facies analysis and architecture, two depositional environments are identified in this formation: (1) perennial braided channel belts and (2) extensive and complex floodplains containing ephemeral small fluvial channels, lakes, and crevasse splay deposits. Upper flow regime primary structures in laterally extensive sandstones encased in the floodplain deposits indicate short-lived high magnitude flood discharge, suggestive of seasonal climates. Trace fossils are sporadically distributed through these facies, generally in suites of low abundance, although in places the bioturbation index is higher. Three major ichnofacies, namely Skolithos, Scoyenia and Mermia are recognized, based on the association of different trace fossils preserved in the channel, crevasse splay of proximal floodplain and pond/lake of distal floodplain deposits, respectively. Vertical Beaconites in palaeosols and an abrupt change from Skolithos to Scoyenia ichnofacies indicate a highly variable water table, controlled by seasonal precipitation. The transitions between the Skolithos, Scoyenia and Mermia ichnofacies reveal that trace fossil preservation was variously controlled by channel abandonment, floodplain dewatering, substrate desiccation or periodic waterlogging of overbank areas. Specifically, increased water discharge over the floodplain during high precipitation, followed by post-flood recovery of hot, dry, low-water table conditions may have been a key controlling factor in shaping the ichnological characteristics of these Upper Triassic red beds.

Application of Chemostratigraphic Methods to Floodplain Alluvial Deposits within the Big Harris Creek Basin, North Carolina

Big Harris Creek, North Carolina, possesses a geomorphic history and alluvial stratigraphic record similar to many drainages in southern Appalachian Piedmont. An approximately 1 km reach of Upper Stick Elliott Creek, a tributary to Big Harris Creek, was used herein to (1) explore the use of chemostratigraphic methods to define and correlate late Holocene alluvial deposits along this relatively uncontaminated rural stream containing legacy sediments (historic, anthropogenically derived deposits), and (2) interpret depositional floodplain processes within small (<10 km2), headwater drainages. The lithofacies within four floodplain sections were described in channel banks and sampled at about 5 cm intervals. The 128 collected samples were then analyzed for grain size and the concentration of 22 elements using X-ray fluorescence. Well-defined chemostratigraphic units (facies) were defined on the basis of a multi-elemental fingerprint using a principal component analysis (PCA) and verified using discriminant analysis (DA). Chemostratigraphic units did not reflect grain size at a site (by design) but marginally correlated to lithofacies defined by field descriptions. Of significant importance, chemostratigraphic units could be quantitatively correlated between the four stratigraphic sections at a much higher spatial resolution (~5 cm) than could be performed using other sedimentologic parameters alone. In combination, the lithostratigraphic and chemostratigraphic architecture of the floodplain is consistent with a previously proposed sequence of deposition for the legacy deposits in which extensive land-use change associated with the onset of cotton farming in the 1860s led to upstream incision and gully formation and downstream deposition on the floodplain surface. Deposition appears to have progressed downvalley as incision deepened, probably in the form of crevasse splay deposits or proximal sandsheets that were occasionally interbedded with vertically accreted sediments. The results indicate that chemostratigraphy represents a highly useful approach to the assessment of floodplain depositional processes over (at least) relatively small temporal and spatial scales, even in areas with minimal sediment contamination.

3D Engineering Geological Modeling to Investigate a Liquefaction Site: An Example in Alluvial Holocene Sediments in the Po Plain, Italy

Liquefaction-induced surface manifestations are the result of a complex geological–geotechnical phenomenon, driven by several controlling factors. We propose a multidisciplinary methodological approach, involving engineering geologists, geomorphologists, sedimentologists, and geotechnical engineers, to build a 3D engineering geological model for liquefaction assessment studies. The study area is Cavezzo (Po Plain, Italy), which is a municipality hit by superficial liquefaction manifestations during the Emilia seismic crisis of May–June 2012. The site is characterized by a Holocene alluvial sequence of the floodplain, fluvial channel, and crevasse splay deposits prone to liquefaction. The integration of different geotechnical investigations, such as boreholes, CPTm, CPTu, and laboratory tests, allowed us to recognize potentially liquefiable lithological units, crucial for hazard assessment studies. The resulting 3D engineering geological model reveals a strict correlation of co-seismic surface manifestations with buried silty sands and sandy silts within the shallow 10 m in fluvial channel setting, which is capped and laterally confined by clayey and silty deposits.

Upper Cretaceous (Coniacian-Santonian) dinosaur nesting colony preserved in abandoned crevasse splay deposits, Wi Island, South Korea

Dinosaur egg-bearing deposits of the Upper Cretaceous (Coniacian-Santonian) Wido Volcanics at Wi Island, South Korea, were studied from a taphonomic perspective to improve understanding of nesting behavior. Based on facies, bedset geometry, and other sedimentological characteristics, the section can be classified into three facies associations: (1) ephemeral fluvial channels (FA I), (2) crevasse splay lobes (FA II), and (3) floodplains (FA III). FA I is characterized by single- and multi-storey channel fills enclosed within FA III, while FA II consists of horizontally-stratified sandstone and calcareous mudstone reflecting weakly developed paleosol profiles. The ephemeral fluvial channels are locally developed at 160 m distance from the main egg locality, suggesting that the nesting site was relatively protected from levee failure and favorable for fossil preservation. Isolated eggs and reworked eggshell fragments of three different types (Propagoolithus widoensis, Reticuloolithus acicularis, and Aenigmaoolithus vesicularis) are frequently found together. The most common type, P. widoensis is preserved as clutches and characterized by numerous closely-spaced pore canals, indicating that the eggs were buried during oviposition, increasing preservation potential. Such in situ clutches occur in at least nine horizons and some occur closely spaced (<1 m apart), lateral to crevasse splay lobe successions (FA II). It suggests that the egg-layers of P. widoensis preferred this facies as a nesting ground for extended periods. FA II was deposited at a higher paleo-elevation than FA III, which may have benefited nesting dinosaurs, allowing them to easily detect predators (FA III) while being less frequently exposed to flood hazards.

TAPHONOMY AND DEPOSITIONAL SETTING OF THE SHRINGASAURUS INDICUS (ARCHOSAUROMORPHA: ALLOKOTOSAURIA) BONEBED FROM THE MIDDLE TRIASSIC DENWA FORMATION, SATPURA GONDWANA BASIN, INDIA

ABSTRACT A bonebed of multiple skeletons of the Triassic horned reptile Shringasaurus indicus was discovered in the upper Denwa Formation, Satpura Gondwana Basin, India. The monotaxic bonebed contains multiple individuals of different ontogenic stages indicating herding behavior by Shringasaurus indicus. The herd was a mixed-sex herd. The adult and sub-adult bones in the bonebed exceed the number of juvenile bones. The distribution of the bones was slightly patchy, bones of different individuals were admixed, and several bones were piled up implying mass mortality. The bonebed occurs in a fine-grained mudrock that is hydraulically incompatible with long-distance transport and concentration by currents. Sedimentary facies analysis indicates that the bonebed accumulated and was buried in a crevasse splay deposit between two ENE-WSW trending channel-fill complexes. The northern channel-fill complex was formed by unidirectional flow with lateral channel migration towards the south and with minor contemporaneous tectonic subsidence. Repeated breaching of the levee by this channel flow led to the incremental development of the crevasse splay deposit. The herd of Shringasaurus indicus, which lived near to the perennial channel, was drowned en masse and the carcasses were trapped within the muddy sediments of the crevasse splay deposit. Apart from a partially articulated skeleton, the rest of the bones were disarticulated but remained associated. The bones show little evidence of post-mortem modifications. With a continuous supply of the sediments through the spillover channels, the bones were buried before complete disarticulation and dispersal had taken place.

Influence of fluvial crevasse-splay deposits on sandbody connectivity: Lessons from geological analogues and stochastic modelling

To investigate the importance of crevasse-splay elements for the connectivity of fluvial sandbodies, an integrated study has been undertaken that combines data from outcropping and subsurface fluvial successions, and modern rivers, with outputs from forward stratigraphic models and object-based modelling. Literature-derived analogue data on over 2100 crevasse-splay elements from many fluvial systems have been synthesized to obtain quantifications of the proportion and geometry of crevasse-splay units, and of their topological relationships with channel deposits. Some of the analogue data are used to inform inputs to stochastic modelling that is applied to determine how the presence of crevasse-splay deposits affects the connectivity of successions in which channel sandstones are preserved as channelized bodies or compartmentalized point-bar units.Architectural configurations are documented that are variably characterized by (i) crevasse-splay sandbody compartmentalization, (ii) channel-sandbody connections that increase sandbody size and the likelihood of borehole connectivity, and (iii) intercommunication between different channel sandbodies. Analyses of analogue data demonstrate scaling relationships between the morphometry of crevasse-splay elements and associated channel elements and river catchments. Results also demonstrate how the proportions of channel and crevasse-splay deposits tend to covary in stratigraphic volumes. This information, when ported to stochastic models, yields results showing how the influence of crevasse-splay elements on static connectivity varies – in relative terms – as a function of architectural style, net-to-gross ratio and channel-sandbody geometry. Channel-body connections may be more important for smaller and relatively sand-poor fluvial systems, whereas mud-plug compartmentalization of splay elements may be more important for successions with larger channel-body width-to-thickness aspect ratios and lower net-to-gross ratios.The results of this work can be applied to facilitate and improve the characterization and modelling of the static connectivity of subsurface successions that include crevasse-splay deposits. The results also reveal the possible influence of certain geological controls (channel avulsion, river-system scale, overbank cannibalization) on static connectivity.

Holocene sedimentary evolution of the Mekong River floodplain, Cambodia

The Mekong River, which has high economic and ecological importance, has an extensive floodplain and delta plain that extends from Cambodia to Vietnam. Understanding the Holocene evolution of the fluvial system is needed in order to predict the future development of the system and develop a strategy to guide the sustainable management. This paper reconstructs the Holocene sedimentary evolution of the Mekong River floodplain, Cambodia, from 12 auger cores and 69 optically stimulated luminescence ages, and compares the reconstructed floodplain history with that of other large river systems. Rapid deposition of thick crevasse splays implies floodplain aggradation in response to sea-level rise before 6.5 ka. After 6.5 ka, when the sea-level reached a stillstand, the rapid aggradation ceased and levee and crevasse-splay deposition were localized near the anastomosing river channels. The rate of levee accretion was very low in the anastomosing river system (<1 m/kyr), which implies that the riverbed aggradation caused by sea-level rise before 6.5 ka outpaced levee accretion and led to avulsion by diversion into the floodbasin. Some distributary channels were abandoned around 4 ka, corresponding to a shift from an anastomosing to a single-channel river system. This shift might be attributed to an abrupt decrease in precipitation caused by weakening of the East Asian and Indian summer monsoons. Downstream of Phnom Penh, rapid levee deposition started on the uppermost delta plain after 1 ka while rapid lateral migration of the river channel occurred upstream. These increased fluvial activities correspond to accelerated mud accretion of the Mekong delta coast and potentially reflect an increase in sediment supply caused by human activities. The evolution of the Mekong River floodplain might be comparable with other large river systems in the EASM, ISM, and African monsoon regions, where a substantial weakening of the summer monsoon and hence a decrease in precipitation occurred in response to declining summer insolation in the middle to late Holocene.

Facies architecture of fluviatile deposits of the Jurassic-Cretaceous Bertangga Formation, Peninsular Malaysia

Bertangga Formation is a part of the Jurassic-Cretaceous non-marine sequences in Thailand and Malaysia. However, its facies analysis and depositional model have not been investigated in detail. Eleven lithofacies have been described in the Bertangga Formation and combined five facies associations including channel, point bar, floodplain, crevasse splay and swamp facies associations. Channel deposits are stacked bodies of fining upward sequences with prevalent erosional bases, formed by vertical aggradation and avulsion of channels. Point bar sands comprise cross bedded sandstone bodies formed in upper flow regime and possible lateral accretion surfaces. Crevasse splay deposits form sheets of fine-to-medium-grained sandstone. Floodplain sediments are composed of motteled grey mudstone. Swamp depositional environment is characterized by an association of coal, carbonaceous shale and siltstone. Facies analysis allows reconstruction of the depositional environment of the Bertangga Formation as a meandering fluvial system. Facies association also shows the increasingly distal and fine-grained trend from west to east of the studied area, which suggests possible eastward paleo-flow direction of the river. The existence of kaolinite in all samples indicates weathering of felsic rocks under acidic conditions. In the same time, the presence of smectite in the eastern part of the study area may suggest a contribution of mafic and/or volcanic rocks to the source of sediments in this area.