Cream Samples Research Articles

Antifungal Activity of Alcoholic Extract of Allium Jesdianum on Fungi-Contaminated Dairy Products.

One of the main sources of contaminated dairy products is moldy fungi, specifically species of Aspergillus and Penicillium. This study aimed to evaluate the effect of the alcoholic extract of Allium jesdianum plant on the growth of molds contaminating dairy products in Isfahan. In this research, 200 samples of dairy products were gathered from different areas of Isfahan city, including 70 samples of cheese, 60 samples of buttermilk, 40 samples of yogurt, 20 samples of curd, and 10 samples of cream. The antifungal activity of Allium jesdianum plant was investigated by the diffusion method in disc, well, and agar dilution in various concentrations. Minimum inhibitory concentration (MIC) and minimum fatal concentration (MFC) were also determined. Aspergillus, Penicillium, Cladosporium, and Acremonium fungi were the most commonly found fungal contaminants of this investigation. Antifungal activity was not observed by disc diffusion and well diffusion methods. In the agar dilution method, ethanolic and methanolic extracts of stem and leaves in concentrations of 80, 60, 40, and 30 mg/ml, and ethanolic and methanolic extracts of plant bulbs in concentrations of 60 and 30 mg/ml revealed antifungal activity against Aspergillus niger, Penicillium notatum, and Penicillium chrysogenum. The MIC of stem and leaf ethanol extracts and onion ethanol for Aspergillus niger was 18.7, and for Penicillium notatum and Penicillium chrysogenum, it was 37.5, 37.5, 37.5, and 37.5 mg/ml. Fungal contamination of dairy products is a serious threat to the public health of society. Therefore, identifying medicinal plants with antifungal activity can be an effective step in preventing fungal contamination and increasing the shelf life of these products. The results of this research have shown that the Allium jesdianum plant can inhibit the growth of Aspergillus niger, Penicillium notatum, and Penicillium chrysogenum.

Physicochemical, Antioxidant Characteristics and Sensory Evaluation of Functional Pro‐Biogenic Ice Cream

ABSTRACTPro‐biogenic is a recent terminology widely used for products that combine biogenic materials and probiotics which has made progressive improvement in a new era of research on functional foods. This study aimed to develop functional ice cream with Bacillus coagulans and propolis extract (PE) as a biogenic part to develop ice cream's physiochemical and antioxidant characteristics. Five probiotic ice cream samples were prepared using different levels of PE powder (0%, 0.2%, 0.4%, 0.6%, and 0.8% w/w), and the physicochemical, total phenol content (TPC), antioxidant and sensory properties, and probiotic survival of the samples were examined. The study found that PE levels did not significantly impact fat, protein, carbohydrate, and ash content, overrun, melting rate, and adhesiveness of probiotic ice cream, but increased dry matter, apparent viscosity, and hardness. Adding PE to freeze‐storage samples significantly (p < 0.05) reduced pH and improved TPC and antioxidant activity. The prepared ice cream containing probiotic bacteria and PE extracts, despite their darker and yellower color, were acceptable based on sensory evaluation. Furthermore, the survival of probiotic bacteria in the ice cream, with different levels of PE appeared to be in acceptable limits (107 CFU/g). The findings of the research indicated that the pro‐biogenic ice cream has good functionality and incorporating a PE aside probiotic could improve physiochemical and antioxidant characteristics which can be used as a value‐added ingredient in the formulation of functional pro‐biogenic ice creams.

Health risk assessment of lead and cadmium in milk-based products of Iran

The primary objective of this study is to assess the health risks associated with lead (Pb) and cadmium (Cd) contamination in dairy products consumed in Iran. To conduct the research, 132 samples of cow milk, yogurt, cream, and doogh (a traditional Iranian beverage) were collected from both traditional and industrial livestock farms in Zanjan, Iran. The samples were microwave-digested, and an atomic absorption spectrophotometer equipped with a graphite furnace was used to determine toxic metals contents. The findings of the study revealed that the average concentrations of Pb in milk and dairy product exceeded the permitted limits. The mean ± se levels of Pb and Cd in milk, yogurt, doogh, and cream were 92.64 ± 8.73, 52.19 ± 8.42, 78.80 ± 12.89, 106.07 ± 8.94 μg/kg and 2.34 ± 0.22, 1.21 ± 0.20, 2.59 ± 0.57, 5.61 ± 0.63 μg/kg, respectively. For the purpose of exposure assessment, the chronic daily intake (CDI) was utilized, while the Hazard Quotient (HQ) and Total Hazard Quotient (THQ) were employed for non-carcinogenic risk assessment. Additionally, the Incremental Lifetime Cancer Risk (ILCR) was utilized for carcinogenic risk assessment. The results revealed that the highest exposure to Pb and Cd in the P 95th of CDI were observed in milk, followed by yogurt, doogh, and cream. According to our finding, the HQ and THQ values for potentially toxic elements (PTEs) related to the consumption of dairy products in the P 95th of cumulative probability were below 1. The results indicate that the ILCR of Cd (P 95th) due to the consumption of dairy products falls within the acceptable risk range (10−4 to 10−6). While our findings indicate levels of Cd in dairy products, it is important to note that there are currently no established standards for permissible Cd concentrations in Iran. Therefore, further research and regulatory frameworks are needed to ensure public safety.

Effect of protein-phenolic acid complexes on ice cream structure and meltdown behavior

This study focused on understanding the effects of protein-phenolic acid complexes on structural changes and meltdown behavior in ice cream. Three phenolic acids (4-hydroxybenzoic acid, vanillic acid, and gallic acid) at two concentrations (2 and 10 mg/g) were individually investigated. Compared to control ice cream, 2 and 10 mg/g phenolic acid increased the induction time for the first drip by 175–200% and 200–292%, respectively. Ice cream with gallic acid and vanillic acid at 10 mg/g exhibited the lowest meltdown rates compared to other treatments. Addition of phenolic acids caused reduction of ice cream pH (4.92–6.13), overrun (23.11–69.02%), consistency coefficient (9.47–175.56 Pa sn), and melting enthalpy (154,320–193,330 J/kg), while increasing the apparent viscosity (478.37–8770.17 mPa s), flow behavior index (0.42–0.62), and fat globule size (2.22–10.53 μm). Fluorescence spectroscopy analysis of a model ice cream mix indicated the presence of protein-phenolic acid interactions. Microscope images of ice cream samples treated with SDS and EDTA further suggested that protein-phenolic acid interactions help create fat aggregation. These findings indicate that addition of phenolic acid to an ice cream mix affects its microstructure by generating protein-phenolic acid complexes that cause protein-mediated fat aggregation, altering the ice cream's viscosity properties and resulting in a lower meltdown rate.

Effect of Cold PlasmaTreatment on Physicochemical and Microbiological Properties of Clotted Cream

The aim of this study was to determine the effect of cold plasma treatment, which was applied by using two different gases (O2 and Ar) and their mixtures onto sample surfaces for different intervals, on the physicochemical and microbial parameters of clotted cream during storage for up to 10 days. Cold plasma treatment caused a decrease in pH, aw, L*, and b* values of clotted cream samples and an increase in their a* and TBA values. The pH values of samples ranged from 4.68 to 6.67, and the range for aw values was between 0.903 and 0.803. For TBA, the highest change was observed in the K2 sample with 0.479 mg malondialdehyde/kg. The color L* values of all samples were between 99.79 and 93.82, a* values between 1.82 and 1.22, and b* values between 6.22 and 4.74. Among the treatments, the treatment of O2-Ar gas mixture (50-50%) resulted in the highest decrease in the total counts of aerobic mesophilic bacteria (TMAB), total aerobic psychrophilic bacteria, proteolytic bacteria, yeast-molds, coliform group bacteria, and Staphylococcus aureus. Compared to the control sample, at the end of 10 days of storage, a decrease of 2.41 for TMAB, 3.64 for total yeast-mold, 4.23 for coliform group bacteria, and 4.72 log cfu/g for S. aureus was achieved. Results indicated that the cold plasma treatment did not cause significant changes in the physicochemical values of clotted cream samples but reduced their microbial load.

High-sensitivity detection of copper ions in water via cellulose nanomaterial nano-antennas and DFT studies

The widespread occurrence of copper in water presents serious health hazards, requiring improvement of a method to monitor and remove copper ions in the field. In this study, a fresh approach is introduced that incorporates Cellulose Nanomaterials (CNMs) with a unique rod-like structure, offering a large surface area that is perfect for adsorbing cupral, a Cu(II) ion probe. By using this arrangement, toxic copper can be rapidly and visibly detected. Without any special tools, it's easy to see the color change from off-white to brown. The copper nano-antenna (CNA) has an impressively high sensitivity, detecting as low as 2.5 × 10–7 M through image analysis and 4.3 × 10–8 M with spectrophotometric methods. The values fall significantly below the WHO drinking water guidelines of 2 ppm. The CNA's ability to detect at low thresholds and be easily regenerated makes it an effective tool for initial water testing. According to the findings, the CNA could be a promising solution for enhancing safety in drinking water by allowing real-time visualization of copper ions, with only 5 mg required for measurements. Computational analysis has been conducted to study the structural properties of copper and its copper complex (Cu(CNA)2). There is a significant-close agreement between the theoretical and experimental results. The developed CNA material was tested in various environmental and real samples for detecting Cu2+ ions, especially in water and whitening cream samples showing the material application for real-world applications.

Occurrence of mycotoxins of the beauvericin and enniatin groups in infant foods and risk assessment study

The aim of this study was the determination of mycotoxins belonging to beauvericin and enniatin groups in infant foods to be considered for the assessment of dietary exposure. The extraction phase with acetonitrile was followed by a purification step before liquid chromatography-mass spectrometry analysis. The method was suitable to detect these mycotoxins in different categories of infant foods (cereal-based creams, biscuits, and pasta) at concentrations between 0.30 μg/kg for beauvericin and enniatin A and 0.60 μg/kg for the remaining enniatins (A1, B and B1) up to a maximum of 20 μg/kg. Beauvericin was the most detected mycotoxin in pasta samples (15%) at a maximum concentration of 1.1 μg/kg, while enniatin B showed the highest presence (90%) in biscuits, at levels ranging from 0.63 to 11 μg/kg. Enniatin B1 was found in all matrices at comparable ranks of positivity, with the highest occurrence rate (30%) in biscuits. The highest estimated daily intake was observed in infant consumers aged 1–3 years and was associated with the consumption of biscuits, followed by samples of pasta and cereal-based creams. It was higher in infants than in children aged 4–9 years due to consumption data expressed per kg of body weight. The lowest estimated daily intake was obtained for beauvericin in all matrices as its concentrations were lower than those of the enniatin group. The results of this study highlighted the need to implement monitoring also for these mycotoxin groups, paying particular attention to infants as a high-risk category.

Investigation of Staphylococcus Spp and Coliform Bacteria Contamination Sources after Cleaning-in-Place in Production Lines of Dairy Factories in Türkiye.

Microorganisms detected on dairy factory surfaces after disinfection can cause product contamination, leading to economic losses and health hazards for consumers. In this study, the presence of Staphylococcus spp. and Coliform in a total of 450 samples taken from food-contact and non-contact surfaces (stainless steel, plastic, cloth, and tiles surfaces), raw milk and final product (white cheese, kashar cheese, butter, yogurt, and cream) samples in five dairy factories was investigated by conventional techniques. The isolates obtained were identified by matrix-assisted laser desorption/ionization-time of flight mass spectrometry. In this study, a total of 54 Staphylococci (16.7% S. aureus and 81.5% coagulase-negative Staphylococci [CNS]) and 44 coliform isolates were identified at the species level. The most common CNS isolated by samples was S. epidermidis followed by S. saprophyticus, S. capitis, S. succinus S. carnosus. S. xylosus, S. sciuri, S. equorum, S. warneri, and S. hominis. Eighteen of the coliform isolates (41%) were identified as E. coli; 13 (29.5%) as E. cloacae; 3 (6.9%) as E. kobei, C. freundii, and K. oxytoca; 2 (4.5%) as K. pneumoniae; 1 (2.3%) as E. ludwigii and C. farmeri. The contamination rate of non-food contact surfaces (71.3%) was found to be higher than food contact surfaces (10.4%), and contaminated surfaces were found to be effective in product contamination. Study results show that some bacterial species obtained from raw milk, surfaces, and final products are factory specific and surface-associated bacteria are prominent in the product microbial profile.

Physicochemical, Nutritional, and Antioxidant Properties of Ice Cream Enriched with Red Beetroot (Beta vulgaris L.) at Varying Sucrose Levels

This study aims to produce a low-calorie ice cream with a higher nutritional value using red beetroot (Beta vulgaris L.). Four kinds of ice cream containing 5%, 10 % and 15% sucrose and single red beetroot (RB) ratio 15% and control (15% sucrose+ RB free) encoded as RB5, RB10, RB15 and C were produced respectively. The addition of RB increased pH and decreased the acidity (LA) and dry matter contents compared to control. Ash content was decreased depending on the sucrose ratio. While the lowest overrun value was determined in the RB10 sample (23.08%), the highest was in sample C (39.18%). The increasing of sucrose ratio generally increased the first dropping time and decreased the total melting time. The addition of sucrose reduced the viscosity and the highest viscosity values were observed in the sample RB5. While the lowest total phenolic content (TPC) was observed in the control sample (329.69 GAE mg/kg), the highest TPC was found in the RB5 sample (558.55 GAE mg/kg). Also, the lowest DPPH value was determined in the control sample (13.66% inhibition), the highest DPPH value was determined in the RB10 sample (27.98% inhibition). While fructose and glucose values decreased, sucrose values increased in the ice cream samples depending on the increasing of sucrose ratio.

Effects of different processing methods on physicochemical and microbiological properties of kefir ice cream

In this study, kefir ice cream was produced using two different methods. In method 1, the ice cream mixture was incubated with kefir starter culture until a pH value of 6.1 or 5.5 was reached, and in method 2, the ice cream mixture was blended with kefir to reach a pH value of 5.5 or 6.1. Kefir ice cream produced by method 2 had a higher overrun and lower firmness than that produced by method 1. When comparisons were made based on the pH value of the ice cream mixture, kefir ice cream produced from the ice cream mixture with a pH of 6.1 instead of 5.5 had a higher overrun and melting rate and a lower firmness. The slightly higher counts on MRS agar, M17 agar, MSE agar, DSM 254 medium, and YGC agar were determined in the kefir ice cream samples produced by method 1 or produced from an ice cream mixture with a pH of 5.5. Although it is unknown if the number of bacteria on MRS agar detected in the samples, where the number was greater than 6 log cfu g−1 even after 90 days of storage, are probiotics or not, kefir ice cream has the potential to be a probiotic product. In this study, it has been demonstrated that kefir ice creams with different physicochemical and microbiological properties can be produced by altering the ice cream production method and pH value of the ice cream mixture.

Consumer Acceptance of Novel Lucuma Fruit Ice Cream in the US Market.

This study explored the use of lucuma fruit powder in an ice cream formulation for the US market. Six ice cream prototypes were developed using five different lucuma fruit powder variants. A central location test was conducted with frequent ice cream consumers (n = 106) to assess acceptance, attribute intensity rating, ideal intensity levels, and purchase intent against a control sample with caramel flavor. The mean overall liking score for all lucuma ice creams was moderate. The overall, aroma, and flavor liking scores were significantly higher (p < 0.05) for lucuma ice cream samples, whereas the control sample was liked significantly more for texture. The Terrasoul variant of lucuma ice cream was the most liked among all samples, and the control was liked the least. Only the Terrasoul ice cream sample was successful in delivering significantly strong caramel, fruit, and sweet flavor levels; the other lucuma ice cream samples were more comparable to the control. The inclusion of lucuma powder increased powdery mouthfeel perception, negatively impacting texture liking. Consumers perceived all ice cream samples to be weak in flavor and fell short of delivering ideal levels. The US consumers had low-moderate food neophobia scores for lucuma fruit, with 57% showing interest in buying lucuma ice creams.

A novel electrochemical sensor based on aspartic acid polymer and carbonized-ZIF-67 for rapid sensing of arbutin

A novel electrochemical sensor modified by aspartic acid polymer and carbonized-ZIF-67 was prepared for arbutin detection. ZIF-67 was synthesized and carbonized, and then used as the substrate supporting of electrochemical sensor. Carbonized-ZIF-67 had a large specific surface and good electrical conductivity, which provided large electroactive area and promoted the electron transfer at the sensing interface. Aspartic acid polymer was prepared by cyclic voltammetry. Aspartic acid polymer could effectively absorb arbutin, resulting in the preconcentration of arbutin on sensor surface. Benefiting from the synergistic effect between carbonized-ZIF-67 and aspartic acid polymer, the prepared electrochemical sensor exhibited sensitive electrochemical response for arbutin. Under the optimum conditions, the electrochemical sensor achieved a wide linear range in the range from 5 to 110 μmol/L and a low detection limit of 0.41 μmol/L for arbutin. In practical application, the electrochemical sensor was employed to detect arbutin in green tea and whitening cream samples, exhibiting satisfactory recovery rates. With the outstanding features of easy operation, rapid response and high sensitivity, the prepared electrochemical sensor provided a convenient and effective tool for arbutin detection.

Protein Content and Overrun Value in Coconut Milk-Based Ice Cream with Cashew Milk Combination

The purpose of this study is to determine the protein content and overrun value of ice cream made from a combination of coconut milk and cashew milk. This study is an experimental research with a factorial design and a research design in the form of a Complete Randomized Design (CRD). The CRD consisted of three treatments with two repetitions, using coconut milk and cashew milk in the percentages of 60:40%, 50:50%, and 50:60%. The results obtained were processed by editing, coding, tabulating, and entering data. For data analysis, a statistical test in the form of the One-Way ANOVA Test was used to determine the effect of treatment on each different formula regarding protein content and overrun value.The results showed that there was a significant difference in the use of coconut milk and cashew milk on the protein content, with a value of p=0.000 (&lt;0.005), and the overrun value, with a value of p=0.003 (&lt;0.005). the protein content in all ice cream samples remained below the Indonesian National Standard (SNI) minimum requirement of 2.7%. The highest protein content is ice cream A (60%: 40%) at 1.409%, followed by ice cream B (50%:50%) at 1.284%, and ice cream C (40%:60%) with the lowest protein content at 1.192%. The overrun value met the SNI (Indonesian National Standard) for industrial scale ice cream with ice cream A having an highest overrun value of 73.92%, following ice cream B with an overrun value of 65.295% meets the small industry standard, and ice cream.

Physicochemical and sensory properties of vegan ice cream using upcycled Aquasoya powder

SummaryAquasoya (AS) powder arouses great interest as a cost‐effective vegan ingredient. In our study, AS was used to develop vegan ice cream products. Different total solid content (TSC) (31%, 33%, 35%, 37%, and 39% w/w) of ice cream mix was changed by the addition of AS powder. pH, emulsion properties, brix, colour, viscosity, overrun, melting properties, texture profile analysis (TPA), and sensory evaluations were investigated. The pH of each AS (31%, 33%, 35%, 37%, 39%) ice cream mix sample was 5.70–5.81, with no significant variance in AS content. Notably, the 39% AS led to higher Brix and viscosity scores. Moreover, the highest overrun in AS ice cream was observed in the sample containing 39% TSC. In contrast, the 31%, 33%, and 35% samples exhibited lower viscosities. However, the 37% and 39% samples displayed higher viscosities, leading to a longer‐lasting appearance. Regarding sensory evaluation, the 39% sample received the highest ratings for overall taste intensity, colour, smell, bean smell, flavour, taste, astringency, and bitterness. However, it scored the lowest for sweetness, softness, and melting degree. Generally, a higher AS content corresponds to stronger overall characteristics. Additionally, acceptance evaluations showed that panels tended to favour ice cream with lower AS content. All these findings suggest that AS ice cream could be potentially developed using vegan ingredients, offering enhanced nutritional and sensory attributes while serving as an effective emulsifier.

Liquid–liquid microextraction method based on switchable hydrophilic solvent for determination of parabens in cream samples

Liquid–liquid microextraction method based on switchable hydrophilic solvent for determination of parabens in cream samples

Evaluation of microbiological, antioxidant, thermal, rheological and sensory properties of ice cream fermented with kefir culture and flavored with mint (Menthaspicata L.).

Kefir is a healthy fermented dairy product, while ice cream is one of the most consumed dairy products. In this research, ice cream was fermented using a commercial kefir culture and flavored with a mint aroma in different proportions: 0% (KI), 0.2% (KIM2), 0.4% (KIM4), and 0.6% (KIM6). The study investigated the microbiological, thermal, rheological, textural, compositional, and sensory properties as well as antioxidant activity of kefir ice cream samples during 45-day storage. The lactic bacilli, lactic cocci, and Leuconostoc counts of samples were >7 log CFU/g, while the yeast counts were <4 log CFU/g. The microbiological properties (except for yeast counts) of the samples were coherent with legal limits. Antioxidant values (except for samples KIM2 and KIM6) values did not indicate significant differences (p < .05). The pH and melting rate values of the samples decreased with the addition of mint flavor, while acidity values increased. The addition of mint aroma caused significant changes in the thermal properties of ice cream. The overrun, a*, WI, and hardness values of the samples decreased based on the mint flavor concentration, whereas the viscosity and rheological increased. Samples KI and KIM2 were scored higher than other samples for all sensory properties. As a result, fermented ice cream flavored (0.2% mint) with mint could be produced as a desirable dairy product with potential functional properties.

Liposomal Encapsulation of Ascorbyl Palmitate: Influence on Skin Performance.

L-ascorbic acid represents one of the most potent antioxidant, photoprotective, anti-aging, and anti-pigmentation cosmeceutical agents, with a good safety profile. However, the main challenge is the formulation of stable topical formulation products, which would optimize the penetrability of L-ascorbic acid through the skin. The aim of our research was to evaluate the performance of ascorbyl palmitate on the skin, incorporated in creams and emulgels (2%) as carriers, as well as to determine the impact of its incorporation into liposomes on the penetration profile of this ingredient. Tape stripping was used to study the penetration of ascorbyl palmitate into the stratum corneum. In addition, the sensory and textural properties of the formulations were determined. The liposomal formulations exhibited a better penetration profile (p < 0.05) of the active substance compared to the non-liposomal counterpart, leading to a 1.3-fold and 1.2 fold-increase in the total amount of penetrated ascorbyl palmitate in the stratum corneum for the emulgel and cream, respectively. Encapsulation of ascorbyl palmitate into liposomes led to an increase in the adhesiveness and density of the prepared cream and emulgel samples. The best spreadability and absorption during application were detected in liposomal samples. The obtained results confirmed that liposomal encapsulation of ascorbyl palmitate improved dermal penetration for both the cream and emulgel formulations.

Experimental and Theoretical Investigation of Thermal Parameters Influencing the Freezing Process of Ice Cream

Freezing time stands out as the most critical parameter in ice cream production, significantly influencing the final product’s quality and production efficiency. Therefore, it is essential to accurately estimate the freezing time based on ice cream recipes. This research paper focuses on determining the thermal properties of ice cream samples by leveraging insights from previous studies. Moreover, a new specific heat correlation is proposed to account for the latent heat effect of water during the freezing process. The results demonstrated that the new specific heat correlation aligns well with established formulas from previous research as well as experimental results with maximum 2.5% deviation. To validate the accuracy of the proposed numerical model, experimental studies were compared with numerical results for the first time in the context of ice cream freezing inside a mold. Additionally, a parametric analysis was conducted using numerical modelling to discern the relative importance of various production process parameters. Notably, the glycol–water mixture temperature emerged as the most influential parameter affecting freezing time, while the amount of air inside the ice cream was identified as the least significant factor.

The use of xanthan gum in a milk-containing ice cream with the whey protein microparticulate

Hydrocolloids of stabilization systems are necessary components in ice cream production. They influence viscosity, stabilization of structural elements and melting rate. Their role is especially important in production of ice cream with the low content of fat and nonfat milk solids. Today, specialized stabilization systems for production of such ice cream are absent. Moreover, when choosing stabilization systems, there are problems of economic character that are linked with an increase in prices on the effective polysaccharide — locust bean gum. The aim of the research was substantiation of the composition of the effective formulation of hydrocolloids using their available variety, xanthan gum, to use in production of milk-containing ice cream (with the reduced content of fat and dry nonfat milk substances). To achieve the best quality indicators, a whey protein microparticulate was introduced into milk-containing ice cream. Based on the synergetic properties of hydrocolloids in terms of dynamic viscosity, the composition of four formulations was determined with the content of xanthan gum of 8.6% (in samples 1 and 2), 16% (in sample 3) and 3% (in sample 4). Ice cream with the complex stabilization system of the trademark Cremodan 334 was produced as a control sample. The following indicators were determined in all samples: dynamic viscosity, viscoelastic characteristics (hardness, adhesion strength, gumminess), melting rate, condition and dispersity of the air phase and ice crystals. All developed formulations were superior to the control sample in terms of viscosity by 1.2–2 times. It has been found that replacement of the kappa-carrageenan fraction with iota-carrageenan in combination with guar gum and xanthan gum in an amount of 50% leads to a decrease in viscosity by 1.3 times. A reduction of visco-elastic characteristics was noted in the samples of hydrocolloid formulations under study. When using iota-carrageenan (samples 2 and 4), a notable reduction of thermal stability of ice cream was revealed in sample 4. Furthermore, a decrease in dispersity of the air phase was observed; the content of air bubbles with a size of 50 µm reduced by almost 30%. Based on the results of the investigations, it has been established that the formulation of hydrocolloids of ice cream sample 1, which consists of mono- and di-glycerides of fatty acids, guar gum, xanthan gum and kappa-carrageenan, allows obtaining a product with technologically necessary quality indicators and the most cream-like consistency.

Study of alginate-encapsulated phycoerythrin in promoting the biological activity of synbiotic ice cream with Lactobacillus casei

This study examines the effect of phycoerythrin (PE) from a cyanobacterial Nostoc strain encapsulated with alginate as a potential prebiotic to produce synbiotic ice cream products with Lactobacillus casei. It was found that the addition of the encapsulated PE affected, mostly favourably, the physicochemical properties, antioxidant activity, probiotic survival, volatile compound contents, and sensory acceptability of the synbiotic ice cream samples before and after aging at the freezing periods of one day to eight weeks. Thus, it confirms the prebiotic potential of PE for synbiotic ice creams with L. casei.