Crater Retention Ages Research Articles

Impact cratering at the lunar Ina irregular mare patch (IMP): Experimental evidence for the nature of impacts into porous basaltic substrate and outstanding questions

The enigma of the apparently young crater retention age for the large lunar volcanic Irregular Mare Patch Ina (∼33.2 Myr) is critically analyzed through the review of: 1) experimental data on high velocity impacts into porous targets, 2) observed small impact crater morphology, and 3) the possible variation in small impact crater morphology with age. While we find that these different data sets and approaches could not unequivocally resolve the enigma, our analysis provides directions for new studies in several disciplines that are designed to help resolve the age conundrum and improve upcoming exploration mission goals and objectives.

Numerical simulations suggest asteroids (101955) Bennu and (162173) Ryugu are likely second or later generation rubble piles

Rubble pile asteroids are widely understood to be composed of reaccumulated debris following a catastrophic collision between asteroids in the main asteroid belt, where each disruption can make a family of new asteroids. Near-Earth asteroids Ryugu and Bennu have been linked to collisional families in the main asteroid belt, but surface age analyses of each asteroid suggest these bodies are substantially younger than their putative families. Here we show, through a coupled collisional and dynamical evolution of members of these families, that neither asteroid was likely to have been created at the same time as the original family breakups, but rather are likely remnants of later disruptions of original family members, making them second, or later, generation remnants. Our model finds about 80% and 60% of asteroids currently being delivered to near-Earth orbits from the respective families of New Polana and Eulalia are second or later generation. These asteroids delivered today in the 0.5-1 km size range have median ages since their last disruption that are substantially younger than the family age, reconciling their measured crater retention ages with membership in these families.

Shallow subsurface basalt layer along Cerberus Fossae, Mars: Insights from SHARAD, HiRISE, and CRISM analysis

We surveyed the subsurface structure along Cerberus Fossae using data from SHAllow RADar (SHARAD), High-Resolution Imaging Science Experiment (HiRISE), and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the Mars Reconnaissance Orbiter (MRO). The subsurface structure along the Cerberus Fossae is fundamental to understanding the depositional history of the region. We identified meter-scale stratigraphy using HiRISE images and digital terrain models (DTMs) and found three distinct vertical units 1) ∼3 to 5 m thick regolith cover, 2) ∼30 m thickly layered unit, and 3) ∼260 m thick massive unit dominated by boulders. Using SHARAD radargrams, we identified a subsurface reflector at the interface between units 2 and 3, located ∼34 m deep. Our analysis suggests a real dielectric permittivity of 9.34 ± 1.01 (1σ), and a mean loss tangent of 0.027 ± 0.01 for the shallow subsurface material, thus indicating thick, dense shergottite-type basaltic material along the Cerberus Fossae. Using the dielectric permittivity mixing law, we found that the porosity of the shergottite-type basalt is ∼4%. CRISM analysis aids in further constraining the nature of the shergottite-type basalt and suggests the presence of Fe-rich olivine along the Cerberus Fossae, thus, referred as olivine-bearing shergottite-type basalt in this study. We derived the age of subsurface material using the crater size-frequency distribution and estimated the crater retention age of ∼4 Ma. Overall, this study suggests a ∼ 30 m thick dense and layered olivine-bearing shergottite-type basalt along the Cerberus Fossae, which is older than 4 Ma. The results of this study are incompatible with the hypothesis of a sea of frozen water in the shallow subsurface (up to 35 m) along the Cerberus Fossae.

Ma'adim Vallis, Mars: Insights into episodic and late-stage water activity from an impact crater

Alluvial fans, a form of sedimentary deposit reported on Mars, offer insight into the evolution and nature of fluvial activity on the planet. Additionally, the region's preserved mineralogy can also be used to study its hydrological history. In this context, we discuss the diverse geomorphology and mineralogy of an unnamed crater that formed on the eastern wall of Ma'adim Vallis, Mars. Ma'adim Vallis is an irregular-shaped, flat-floored valley incised due to the outflow of water from the Eridania basin. The rim of the unnamed crater is breached at multiple locations and it hosts an alluvial fan of an area ~ 50 km2. The CRISM spectral signatures show Mg-rich olivine and Mg-rich smectite. Mg smectite was plausibly transported through water or formed in situ while the underneath terrain was rich in Mg olivine. The crater retention age on the ejecta of the unnamed crater is 3.7 Ga which suggests that the crater likely formed during the Noachian-Hesperian period boundary or earlier. This unnamed crater probably witnessed the last episode of water activity in the Vallis, which was most likely fed by water overflowing from a resurged early Hesperian water activity in Eridania Basin. This study substantiates episodic, late- stage water activity in Ma'adim Vallis, and the unnamed crater formed on the floodplains of the Vallis providing an excellent opportunity for future landing missions to explore astrobiological significance of the region.

Rock Abundance and Erosion Rate at the Zhurong Landing Site in Southern Utopia Planitia on Mars

AbstractRocks on the Martian surface exhibit signatures of geological activities. Rock distribution is also an important factor for landing site selection for exploration missions. This study investigated the rock abundance and erosion rate at the landing site of the Chinese Mars rover, Zhurong, in southern Utopia Planitia. A convolutional neural network based method was developed for rock detection from the images (0.7 m/pixel) obtained by using the high‐resolution imaging camera (HiRIC) onboard the Tianwen‐1 orbiter. Approximately 10,000 rocks with a minimum diameter of 1.4 m (2 pixels on the image) were extracted from the HiRIC images covering the Zhurong landing site and its neighboring region. According to the results, the rock abundance at the Zhurong landing site was approximately 5%. Measurements from the ground images acquired by the Zhurong rover after landing confirmed a rock abundance of approximately 5% at the landing site, consistent with the orbital measurement before landing. Furthermore, we investigated the rock erosion rate at the Zhurong landing region. Rock abundance was negatively correlated with the crater retention age and positively correlated with crater diameter. The obtained rock breakdown rate (0.054 nm/y to 0.074 nm/y) and surface denudation rate by filled volume of craters (0.104 nm/y to 0.209 nm/y) were in agreement with the values previously reported for the Amazonian period on Mars. The low erosion rate implies a dry climate and the absence of fluvial erosion processes in the Amazonian period.

Terrestrial martian analogues from the Indian subcontinent: Implications for hydrological activity on Mars

Martian geology and surface geomorphic features are grouped under Noachian, Hesperian, and Amazonian eras, based on the crater retention ages and resurfacing ages by crater densities. Comparing the similarities and differences between Martian landforms and their terrestrial analogues promotes an understanding of how surface processes operated on both planets. The study focusses on the processes responsible for the evolution of fluvial valleys on the flanks of volcanic craters and the fluvial terraces with an objective towards ascertaining the role of changing climate, tectonic, and volcanic conditions. We have studied the channels that developed on the flank of volcanic crater Ceraunius Tholus and compared with the monogenetic volcanic field of Dhinodhar Hill which have been significantly modified by fluvial processes. Similarly, the fluvial basins developed on the Hesperian volcanic units of Echus plateau were compared with the Alaldari drainage of Upper Tapi river basin, showing the development of theater-headed channels and valleys, and relative fluvial features showing the strong influence of catastrophic climate and tectonic, which is also supported by the morphometric analysis in modulating the topography. The fluvial terraces developed in the Nubra and Shyok rivers of Ladakh and Upper and Middle reaches of Satluj in Central Himalayas are compared with Noctis fossae on Mars both developed due to the interplay of tectonism and climate.

Crater production on Titan and surface chronology

Context. Impact crater counts on the Saturnian satellites are a key element for estimating their surface ages and placing constraints on their impactor population. The Cassini mission radar observations allowed crater counts to be made on the surface of Titan, revealing an unexpected scarcity of impact craters that show high levels of degradation. Aims. Following previous studies on impact cratering rates on the Saturnian satellites, we modeled the cratering process on Titan to constrain its surface chronology and to assess the role of centaur objects as its main impactors. Methods. A theoretical model previously developed was used to calculate the crater production on Titan, considering the centaur objects as the main impactors and including two different slopes for the size-frequency distribution (SFD) of the smaller members of their source population. A simple model for the atmospheric shielding effects is considered within the cratering process and our results are then compared with other synthetic crater distributions and updated observational crater counts. This comparison is then used to compute Titan’s crater retention age for each crater diameter. Results. The cumulative crater distribution produced by the SFD with a differential index of s2 = 3.5 is found to consistently predict large craters (D > 50km) on the surface of Titan, while it overestimates the number of smaller craters. As both the modeled and observed distributions flatten for craters with D ≲ 25 km due to atmospheric shielding, the difference between the theoretical results and the observational crater counts can be considered as a proxy for the scale to which erosion processes have acted on the surface of Titan throughout the Solar System age. Our results for the surface chronology of Titan indicate that craters with D > 50 km can prevail over the Solar System age, whereas smaller craters may be completely obliterated due to erosion processes acting globally.

Resurfacing processes constrained by crater distribution on Ryugu

Understanding the geological modification processes on asteroids is fundamental for elucidating their surface evolution. Images of small asteroids from spacecrafts show a depletion in smaller craters. Seismic shaking was considered to be responsible for erasing such small craters and the main driver modifying the geology of asteroids. However, a recent artificial impact experiment on asteroid Ryugu conducted by the Japanese Hayabusa2 spacecraft revealed minimal seismic efficiency on the asteroid. To investigate whether a standard seismic shaking model can reproduce the observed crater record, we analyzed the crater distributions on four asteroids, i.e., Eros, Itokawa, Ryugu, and Bennu, using crater production functions under cohesionless conditions. Crater retention ages were estimated as a function of crater diameter for the four asteroids using the crater size-frequency distribution and crater production function estimated for each asteroid. We obtained the relation between a crater retention age t and crater diameter D in the form of power-law function (t ∝ Da).We found that the power-law indices a are inconsistent with diffusion processes (e.g., seismic shaking, where a = 2). This result suggests that seismic shaking models based on a linear diffusion equation cannot explain the crater distribution on the small asteroids. Alternative crater obliteration processes include surface flows suggested by geomorphological and spectral features of Ryugu. Using the crater statistics, we also show that the vertical mixing of the Ryugu material at the depths shallower than 1 m occurs in 103–105 yr by cratering. This rapid resurfacing and replacement of the surface layer in the short timescale would account for the decrease in space weathering rate suggested by previous studies. Furthermore, the timescale required for vertically transporting Ryugu materials to the depths of 2–4 m (104–106 yr), where cosmic rays would not reach, can be compared with the cosmic-ray exposure ages of returned samples. This comparison can be used to constrain the distribution of impactors that collide with Ryugu.

High-resolution observations of bright boulders on asteroid Ryugu: 2. Spectral properties

Many small boulders with reflectance values higher than 1.5 times the average reflectance have been found on the near-Earth asteroid 162,173 Ryugu. Based on their visible wavelength spectral differences, Tatsumi et al. (2021, Nature Astronomy, 5, doi:10.1038/s41550-020-1179-z) defined two bright boulder classes: C-type and S-type. These two classifications of bright boulders have different size distributions and spectral trends. In this study, we measured the spectra of 79 bright boulders and investigated their detailed spectral properties. Analyses obtained a number of important results. First, S-type bright boulders on Ryugu have spectra that are similar to those found for two different ordinary chondrites with different initial spectra that have been experimentally space weathered the same way. This suggests that there may be two populations of S-type bright boulders on Ryugu, perhaps originating from two different impactors that hit Ryugu's parent body. Second, the model space-weathering ages of meter-size S-type bright boulders, based on spectral change rates derived in previous experimentally irradiated ordinary chondrites, are 105–106 years, which is consistent with the crater retention age (<106 years) of the ~1-m deep surface layer on Ryugu. This agreement strongly suggests that Ryugu's surface is extremely young, implying that the samples acquired from Ryugu's surface should be fresh. Third, the lack of a serpentine absorption in the S-type clast embedded in one of the large brecciated boulders indicates that fragmentation and cementation that created the breccias occurred after the termination of aqueous alteration. Fourth, C-type bright boulders exhibit a continuous spectral trend similar to the heating track of low-albedo carbonaceous chondrites, such as CM and CI. Other processes, such as space weathering and grain size effects, cannot primarily account for their spectral variation. Furthermore, the distribution of the spectra of general dark boulders, which constitute >99.9% of Ryugu's volume, is located along the trend line in slope/UV-index diagram that is occupied by C-type bright boulders. These results indicate that thermal metamorphism might be the dominant cause for the spectral variety among the C-type bright boulders on Ryugu and that general boulders on Ryugu may have experienced thermal metamorphism under a much narrower range of conditions than the C-type bright boulders. This supports the hypothesis that Ryugu's parent body experienced uniform heating due to radiogenic energy rather than impact heating.

A re-assessment of the Kuiper belt size distribution for sub-kilometer objects, revealing collisional equilibrium at small sizes

In this work we combine several constraints provided by the crater records on Arrokoth and the worlds of the Pluto system to compute the size-frequency distribution (SFD) of the crater production function for craters with diameter D ≲ 10 km. For this purpose, we use a Kuiper belt objects (KBO) population model calibrated on telescopic surveys, that describes also the evolution of the KBO population during the early Solar System. We further calibrate this model using the crater record on Pluto, Charon and Nix. Using this model, we compute the impact probability on Arrokoth, integrated over the age of the Solar System. This probability is then used together with other observational constraints to determine the slope of the crater-production function on Arrokoth. These constraints are: (i) the spatial density of sub-km craters, (ii) the absence of craters with 1 < D < 7 km; (iii) the existence of a single crater with D > 7 km. In addition, we use our Kuiper belt model also to compare the impact rates and velocities of KBOs on Arrokoth with those on Charon, integrated over the crater retention ages of their respective surfaces. This allows us to establish a relationship between the spatial density of sub-km craters on Arrokoth and of D ~ 20 km craters on Charon. Together, all these considerations suggest the crater production function on these worlds has a cumulative power law slope of −1.5 < q < − 1.2. Converted into a projectile SFD slope, we find −1.2 < qKBO < − 1.0. These values are close to the cumulative slope of main belt asteroids in the 0.2–2 km range, a population in collisional equilibrium (Bottke et al., 2020). For KBOs, however, this slope appears to extend from ~2 km down to objects a few tens of meters in diameter, as inferred from sub-km craters on Arrokoth. From the measurement of the dust density in the Kuiper belt made by the New Horizons mission, we predict that the SFD of the KBOs becomes steep again below ~10–30 m. All these considerations strongly indicate that the size distribution of the KBO population is in collisional equilibrium.

Diverse Polygonal Patterned Grounds in the Northern Eridania Basin, Mars: Possible Origins and Implications

AbstractDiverse polygonal patterned grounds are found to occur in the Eridania basin system (a set of connecting irregular‐shaped depressions interpreted as a paleolake basin system) located in the martian highland region between Terra Cimmeria and Sirenum. We here use multiple sets of imagery to document diverse polygonal patterned grounds in the fluvio‐lacustrine deposits of the northern Eridania basin, and interpret their formation mechanisms. The combination of detailed geomorphological mapping, morphometrical analyses, and investigation of the spatial distribution of polygonal patterned grounds with other geologic features leads us to conclude that (1) desiccation process within the clay‐rich materials would primarily contribute to the formation of cracked polygons, while the ridged polygons are best explained by mineral‐filled fractures that have been cemented and variably indurated by fluids; (2) the correlation between polygon size and topography is observed in the northern smooth light‐toned basement units, which can be best explained by the concentration of salt minerals (such as sulfate) in topographic lows so that the growth of fracturing is inhibited; (3) the large polygonal ridges formed in the knobby light‐toned terrains show a spatial distribution and a trend controlled by basin‐scale compressional tectonics and influenced by preexisting topography, for example, impact structures; (4) the linear fracture‐to‐ridge gradation indicates that the polygonal ridges in chlorides might be guided by the subjacent cracks occurring within clay‐rich materials; (5) both features (cracks and ridges) in some places may have formed simultaneously and are spatially distinct due to differences in erosional states; and (6) geologic features show a wealth of information of multiple aqueous events with the evaporation of the last liquid water ponding to form the southern playa where chloride salt precipitates. Crater retention age determination for the chloride‐bearing basement unit places a lower limit for the cessation of the local aqueous events to ∼3.29 Ga, indicating that the open‐system‐style alteration by surface waters on Mars might have continued in the period of the Late Hesperian to Early Amazonian.

Geologically Diverse Pluto and Charon: Implications for the Dwarf Planets of the Kuiper Belt

Pluto and Charon are strikingly diverse in their range of geologies, surface compositions, and crater retention ages. This is despite the two having similar densities and presumed bulk compositions. Much of Pluto's surface reflects surface-atmosphere interactions and the mobilization of volatile ices by insolation. Abundant evidence, including past and present N2 ice glacial activity, implies that Pluto has undergone substantial climate evolution. An ancient impact basin contains a massive, convectively overturning N2 ice reservoir, whose position and surrounding tectonics suggest a subsurface ocean. Aligned blades of methane ice hundreds of meters tall, found only at high altitude, likely cover much of Pluto's low latitudes and may be a consequence of obliquity variation–driven volatile migration. Multikilometer-high possible cryovolcanic constructs and apparent fissure eruptions indicate relatively late endogenic activity on Pluto. Pluto's range of surface ages is extreme, whereas Charon's surface, while old, displays a large resurfaced plain and a globally engirdling extensional tectonic network attesting to earlier endogenic vigor. ▪ The vast N2 ice sheet Sputnik Planitia controls Pluto's atmosphere and climate, comparable in importance with the role of Greenland and Antarctica on the climate of Earth. ▪ Spectacular evidence for erosion such as now-unoccupied glacial valley networks implies a vigorous early climate, and more widespread N2 ice glaciation, on Pluto. ▪ Geological activity on both bodies requires or required sustained internal heat release and suggests a past (Charon) or present (Pluto) ammoniated, subsurface ocean. ▪ The varieties of geologic experience witnessed on Pluto and Charon should play out among the many and varied dwarf planets of the Kuiper belt.

Geological mapping and chronology of lunar landing sites: Apollo 12

The lunar cratering chronology is fundamentally important, because it is not just used to determine ages for unsampled lunar surfaces, but is commonly applied to other planetary bodies. As part of a systematic study of the calibration of the lunar cratering chronology at the Apollo landing sites, we produced a new detailed geological map of the Apollo 12 landing site, using recent orbital data including Lunar Reconnaissance orbiter (LRO) Narrow Angle (NAC) and Wide Angle (WAC) images, and a Lunar Orbiter Laser Altimeter (LOLA)/SELENE merged digital elevation model (DEM), as well as Chandrayaan M3 spectral data. Using high-resolution LRO NAC images and NAC-derived DTMs, new crater size-frequency distributions (CSFDs) were measured on the updated geological units to determine crater retention ages or N(1) values (i.e., the cumulative number of craters with diameters ≥1 km). Since the Apollo 12 landing site is located in Oceanus Procellarum on a ray of Copernicus crater, it provides two possible calibration points for the lunar cratering chronology: (1) a mare basalt surface age, and (2) an approximate age for Copernicus crater via its ray material. We calibrated our new N(1) values with recently determined radiometric ages of Apollo 12 basalt samples, and compare our results with work done by Hiesinger et al. (2012) for Copernicus crater, and the Neukum (1983) chronology. The updated calibration points are consistent with the lunar chronology of Neukum (1983), which indicates that no updates to this function are currently necessary.

Interpreting the Cratering Histories of Bennu, Ryugu, and Other Spacecraft-explored Asteroids

Abstract Asteroid crater retention ages have unknown accuracy because projectile–crater scaling laws are difficult to verify. At the same time, our knowledge of asteroid and crater size–frequency distributions has increased substantially over the past few decades. These advances make it possible to empirically derive asteroid crater scaling laws by fitting model asteroid size distributions to crater size distributions from asteroids observed by spacecraft. For D &gt; 10 km diameter asteroids like Ceres, Vesta, Lutetia, Mathilde, Ida, Eros, and Gaspra, the best matches occur when the ratio of crater to projectile sizes is f ∼ 10. The same scaling law applied to 0.3 &lt; D &lt; 2.5 km near-Earth asteroids such as Bennu, Ryugu, Itokawa, and Toutatis yield intriguing yet perplexing results. When applied to the largest craters on these asteroids, we obtain crater retention ages of ∼1 billion years for Bennu, Ryugu, and Itokawa and ∼2.5 billion years for Toutatis. These ages agree with the estimated formation ages of their source families and could suggest that the near-Earth asteroid population is dominated by bodies that avoided disruption during their traverse across the main asteroid belt. An alternative interpretation is that f ≫ 10, which would make their crater retention ages much younger. If true, crater scaling laws need to change in a substantial way between D &gt; 10 km asteroids, where f ∼ 10, and 0.3 &lt; D &lt; 2.5 km asteroids, where f ≫ 10.

Collisional formation of top-shaped asteroids and implications for the origins of Ryugu and Bennu

Asteroid shapes and hydration levels can serve as tracers of their history and origin. For instance, the asteroids (162173) Ryugu and (101955) Bennu have an oblate spheroidal shape with a pronounced equator, but contain different surface hydration levels. Here we show, through numerical simulations of large asteroid disruptions, that oblate spheroids, some of which have a pronounced equator defining a spinning top shape, can form directly through gravitational reaccumulation. We further show that rubble piles formed in a single disruption can have similar porosities but variable degrees of hydration. The direct formation of top shapes from single disruption alone can explain the relatively old crater-retention ages of the equatorial features of Ryugu and Bennu. Two separate parent-body disruptions are not necessarily required to explain their different hydration levels.

The Cauchy 5 Small, Low‐Volume Lunar Shield Volcano: Evidence for Volatile Exsolution‐Eruption Patterns and Type 1/Type 2 Hybrid Irregular Mare Patch Formation

AbstractThe lunar shield volcano Cauchy 5, sitting at the low diameter‐height‐volume end of the population, is the only known example containing two different types of Irregular Mare Patches (IMPs) in very close association: (1) the pit crater interior Type 1 IMP composed of bleb‐like mounds surrounded by a hummocky and blocky floor unit and (2) Type 2 IMPs, small, often optically immature pits less than ~5 m deep, located on the generally block‐deficient shield flanks. A four‐phase lunar magma ascent/eruption model predicts that during a relatively brief eruption, low magma rise rates maximize volatile exsolution in lava filling the pit crater. Bubble‐rich magmas overtop the pit crater and form extremely vesicular flows on the shield flanks. Exposure of the flanking flows to vacuum produces a fragmental layer of exploded glassy bubble walls. Subsequent second boiling upon cooling of the flanking flow interiors releases additional volatiles which migrate and collect, forming magmatic foams and gas pockets. As magma rise rates slow, trapped gas and magmatic foam build up below the cooling pit crater floor. Magmatic foams are extruded to form Type 1 IMP deposits. Type 2 IMPs on the flanks are interpreted to be due primarily to subsequent impacts causing collapse of the flow surface layer into the extremely vesicle‐ and void‐rich flow interior. Anomalously young pit crater floor/shield flank crater retention ages compared with surrounding maria ages may be due to effects of Cauchy 5 substrate characteristics (extreme micro‐ and macroporosity, foamy nature, and glassy auto‐regolith) on superposed crater formation and retention.

Quantitative assessment of uncertainties in modeled crater retention ages on Mars

With increasing high-resolution coverage of Mars' surface, crater count analysis is being used to estimate the formative ages of small depositional features (<1000 km2) to constrain timing of climate-driven events. We introduce a probabilistic cratering model that quantifies how modeled age estimates vary strongly with crater obliteration rates (β, defined as the combined rate of erosion and infilling), minimum crater diameter counted, and surface area size. Model results show that crater obliteration introduces significant uncertainty on small surfaces, where moderate obliteration rates (β ~ 25 nm a−1) require surface areas of about 10,000 km2 to date 2 to 3 Ga surfaces accurately, and strongly obliterated surfaces (β = 200 nm a−1) require surface areas up to 100,000 km2. In practice, smaller areas can nonetheless be analyzed probabilistically by estimating a range of likely obliteration rate and modeled age combinations and optimizing these values relative to observed crater count data, resulting in a distribution of possible modeled surface ages and associated β. We demonstrate this method using data from the Coprates Chasma landslide (~200 km2) and numerous fan and delta deposits in the Gale crater region. Although the deposits in and around Gale are <1000 km2, a probabilistic analysis enables us to suggest that deltaic deposits in and near Gale have a higher probability of being older (~>3 Ga) than nearby fans (~1–3 Ga). This analysis provides a simple quantitative framework for assigning probable surface age ranges for small features on Mars.

Geological characterization of Chandrayaan-2 landing site in the southern high latitudes of the Moon

ISRO's lunar orbiter-lander-rover mission Chandryaan-2 is scheduled to be launched in the mid of 2019. In this contribution, we have carried out detailed geological characterization of the prime landing site (70.9°S, 22.8°E) of the Chandrayaan-2 lander – “Vikram”. The proposed landing site is located amidst the nearside lunar highlands at high southern latitudes, which is ~350 km north of South Pole Aitken (SPA) basin rim. Topography of the region is generally flat and it is largely confined by craters of varying diameter. The majority (94%) of the landing ellipse (~15 × 8 km) is within the boundary of intercrater plains with a slope <15° and yields a crater retention age of ~3.7−0.04+0.03 Ga. Craters (diameter: ~2.28 m to ~1.13 km) consistent with morphologies varying from fresh to degraded are common within the landing ellipse, though the ellipse center is devoid of craters with significant depth. Analysis of the spectral reflectance data suggests that the landing ellipse is dominantly feldspathic/highland material. The estimated average abundance of elements within the landing ellipse are Fe: 4.2 wt%, Mg: 5.4 wt%, Ca: 10 wt%, and Ti: 0.3 wt%. Results indicate that the surface composition might correspond to FAN dominated material. Based on elemental and spectral analysis results, we envisage possible mixing of highland material with ejecta from multiple craters surrounding the landing ellipse and/or SPA basin, resulting in hybridisation of highland regolith. Together, the results provide a contextual framework for in situ investigations at the proposed landing site.

In situ fragmentation of lunar blocks and implications for impacts and solar-induced thermal stresses

This study deals with an aspect of blocks observed on many rocky planetary surfaces: in situ fragmentation. Using LROC/NAC images, we characterized the morphology, morphometry and abundance of in-situ fractured blocks observed on the rim of six large impact craters of known emplacement age on the Moon. The relative number of disrupted blocks increases with crater-retention age of surfaces on which blocks are hosted, consistent with fragmentation post-emplacement due to impacts of small meteoroids. The type of break-up morphologies we observe appears to be independent of surface exposure age of the blocks. The inferred flux and size frequency distribution of projectiles responsible for disrupting blocks is consistent with expected lunar impact fluxes. Block fragmentation due to insolation-driven thermal stresses is subordinate to impacts. The possible effects of thermal stresses are evident as meridional cracks, which have preferred orientations in a young block population (~4 Ma), and as loose material (fillet) developing on top of surviving blocks in old populations (>800 Ma).

Geological Characterization of the Ina Shield Volcano Summit Pit Crater on the Moon: Evidence for Extrusion of Waning‐Stage Lava Lake Magmatic Foams and Anomalously Young Crater Retention Ages

AbstractIna, a distinctive ~2 × 3 km D‐shaped depression, is composed of unusual bulbous‐shaped mounds surrounded by optically immature hummocky/blocky floor units. The crisp appearance, optical immaturity, and low number of superposed impact craters combine to strongly suggest a geologically recent formation for Ina, but the specific formation mechanism remains controversial. We reconfirm that Ina is a summit pit crater/vent on a small shield volcano ~3.5 billion years old. Following detailed characterization, we interpret the range of Ina characteristics to be consistent with a two‐component model of origin during the waning stages of summit pit eruption activities. The Ina pit crater floor is interpreted to be dominated by the products of late‐stage, low‐rise rate magmatic dike emplacement. Magma in the dike underwent significant shallow degassing and vesicle formation, followed by continued degassing below the solidified and highly microvesicular and macrovesicular lava lake crust, resulting in cracking of the crust and extrusion of gas‐rich magmatic foams onto the lava lake crust to form the mounds. These unique substrate characteristics (highly porous aerogel‐like foam mounds and floor terrains with large vesicles and void space) exert important effects on subsequent impact crater characteristics and populations, influencing (1) optical maturation processes, (2) regolith development, and (3) landscape evolution by modifying the nature and evolution of superposed impact craters and thus producing anomalously young crater retention ages. Accounting for these effects results in a shift of crater size‐frequency distribution model ages from &lt;100 million years to ~3.5 billion years, contemporaneous with the underlying ancient shield volcano.