Craniovertebral Junction Surgery Research Articles

Natural history of craniovertebral abnormalities in a single-center study in 54 patients with Hurler syndrome.

Craniovertebral junction (CVJ) abnormalities are common and well documented in mucopolysaccharidosis type I-Hurler syndrome (MPS IH), often causing severe spinal canal narrowing. However, the requirement for surgical decompression and/or fusion is uncommon. Although hematopoietic cell transplant (HCT) has been shown to prolong the lives of patients with MPS IH, its effect in halting or reversing musculoskeletal abnormalities is less clear. Unfortunately, there are currently no universal guidelines for imaging or indication for surgical interventions in these patients. The goal of this study was to track the progression of the CVJ anatomy in patients with MPS IH following HCT, and to examine radiographic features in patients who needed surgical intervention. Patients with MPS IH treated at the University of Minnesota with allogeneic HCT between 2008 and 2020 were retrospectively reviewed. Patients who underwent CVJ surgery were identified with chart review. All MPS IH cervical scans were examined, and the odontoid retroflexion angle, clivoaxial angle (CXA), canal width, and Grabb-Oakes distance (pB-C2) were measured yearly for up to 7 years after HCT. Longitudinal models based on the measurements were made. An intraclass correlation coefficient was used to measure interrater reliability. Nine children without MPS IH were examined for control CVJ measurements. A total of 253 cervical spine MRI scans were reviewed in 54 patients with MPS IH. Only 4 (7.4%) patients in the study cohort required surgery. Three of them had posterior fossa and C1 decompression, and 1 had a C1-2 fusion. There was no statistically significant difference in the spinal parameters that were examined between surgery and nonsurgery groups. Among the measurements, canal width and CXA varied drastically in patients with different neck positions. Odontoid retroflexion angle and CXA tended to decrease with age. Canal width and pB-C2 tended to increase with age. Based on the data, the authors observed an increase in canal width and pB-C2, whereas the CXA and odontoid retroflexion angle became more acute as the patients aged after HCT. The longitudinal models derived from these data mirrored the development in children without MPS IH. Spinal measurements obtained on MR images alone are not sufficient in identifying patients who require surgical intervention. Symptom monitoring and clinical examination, as well as pathological spinal cord changes on MRI, are more crucial in assessing the need for surgery than is obtaining serial imaging.

Craniovertebral Junction Surgical Approaches: State of Art.

Surgical approaches directed toward craniovertebral junction (CVJ) can be addressed to the ventral, dorsal, and lateral aspects through a variety of 360° surgical corridors Herein, we report features, advantages, and limits of the updated technical support in CVJ surgery in clinical setting and dissection laboratories enriched by our preliminary surgical results of the simultaneous application of O-arm intraoperative neuronavigation and imaging system along with the 3D-4K EX in TOA for the treatment of CVJ pathologies.In the past 4years, eight patients harboring CVJ compressive pathologies underwent one-step combined anterior neurosurgical decompression and posterior instrumentation and fusion technique with the aid of exoscope and O-arm. In our equipped Cranio-Vertebral Junction Laboratory, we use fresh cadavers (and injected "head and neck" specimens) whose policy, protocols, and logistics have already been elucidated in previous works. Five fresh-frozen adult specimens were dissected adopting an FLA. In these specimens, a TOA was also performed, as well as a neuronavigation-assisted comparison between transoral and transnasal explorable distances.A complete decompression along with stable instrumentation and fusion of the CVJ was accomplished in all the cases at the maximum follow-up (mean: 25.3months). In two cases, the O-arm navigation allowed the identification of residual compression that was not clearly visible using the microscope alone. In four cases, it was not possible to navigate C1 lateral masses and C2 isthmi due to the angled projection unfitting with the neuronavigation optical system, so misleading the surgeon and strongly suggesting changing surgical strategy intraoperatively. In another case (case 4), it was possible to navigate and perform both C1 lateral masses and C2 isthmi screwing, but the screw placement was suboptimal at the immediate postoperative radiological assessment. In this case, the hardware displacement occurred 2months later requiring reoperation.

Functional and radiological outcomes following craniovertebral junction surgery.

Craniovertebral junction (CVJ) pathologies include atlantoaxial instability/deformities resulting in myelopathy, respiratory failure, and even death. Here, we describe the indications, preoperative planning, and intra-operative/postoperative complications following surgical management of CVJ anomalies. A prospective analysis of 34 patients with CVJ pathology was evaluated between 2015 and 2022. Their various etiologies included atlantoaxial instability, trauma, tuberculosis, Down's syndrome, Morquio syndrome, os odontoideum, and atlantoaxial abnormalities. Clinical outcomes were assessed using the American spinal injury association (ASIA) impairment scale score and Benzel's modified Japanese Orthopedic Association (mJOA) score. Surgical assessments included length of hospital stay, operative time, blood loss, and intraoperative postoperative complications. Radiological parameters included fusion (i.e., implant loosening/implant failure), preoperative/ postoperative atlanto-dens interval (ADI), clivus canal angle (CCA), and space available for cord (SAC). Five patients were managed conservatively, while 29 patients had surgery. Operations included occipitocervical fusion (14 patients), C1-2 fusion (10 patients), C1-2 transarticular screw fixation (four patients), and one patient underwent anterior corpectomy decompression/fusion. Seven patients had vertebral artery anomalies, and 13 patients had atlantoaxial abnormalities. At the final follow-up, atlantoaxial instability (i.e., mean preoperative ADI of 6.6 ± 2.3 mm) was restored to 4.2 ± 0.6 mm, significant cord compression (i.e., with mean SAC of 8.3 ± 2.9 mm) was relieved to 17.2 ± 1.6 mm, and the mean preoperative CCA (i.e., 130.2 ± 15.3) was improved to 143.3 ± 8.3°. There was also a statistically significant improvement in the ASIA scale and mJOA score. Surgical management of CVJ abnormalities requires expertise and meticulous planning to avoid devastating complications such as wound dehiscence and catastrophic vertebral artery injury.

Novelties for increased safety in cranio-vertebral surgery: a review.

The cranio-vertebral junction (CVJ) was formerly considered a surgical "no man's land" due to its complex anatomical and biomechanical features. Surgical approaches and hardware instrumentation have had to be tailored in order to achieve successful outcomes. Nowadays, thanks to the ongoing development of new technologies and surgical techniques, CVJ surgery has come to be widely performed in many spine centers. Accordingly, there is a drive to explore novel solutions and technological nuances that make CVJ surgery safer, faster, and more precise. Improved outcome in CVJ surgery has been achieved thanks to increased safety allowing for reduction in complication rates. TheAuthors present the latest technological advancements in CVJ surgery in terms of imaging, biomaterials, navigation, robotics, customized implants, 3D-printed technology, video-assisted approaches and neuromonitoring.

Incidences, causes and risk factors of unplanned reoperation within 30days of craniovertebral junction surgery: a single-center experience.

To investigate the incidences, causes, and risk factors for unplanned reoperation within 30days of craniovertebral junction (CVJ) surgery. From January 2002 to December 2018, a retrospective analysis of patients who underwent CVJ surgery at our institution was conducted. The demographics, history of the disease, medical diagnosis, approach and type of operation, surgery duration, blood loss, and complications were recorded. Patients were divided into the no-reoperation group and the unplanned reoperations group. Comparison between two groups in noted parameters was analyzed to identify the prevalence and risk factors of unplanned revision and a binary logistic regression was performed to confirm the risk factors. Of 2149 patients included, 34(1.58%) required unplanned reoperation after the initial surgery. The causes for unplanned reoperation contained wound infection, neurologic deficit, improper screw placement, internal fixation loosens, dysphagia, cerebrospinal fluid leakage, and posterior fossa epidural hematomas. No statistical difference was found in demographics between two groups (P > 0.05). The incidence of reoperation of OCF was significantly higher than that of posterior C1-2 fusion (P = 0.002). In terms of diagnosis, the reoperation rate of CVJ tumor patients was significantly higher than that of malformation patients, degenerative disease patients, trauma patients, and other patients (P = 0.043). The binary logistic regression confirmed that different disease, fusion segment (posterior) and surgery time were independent risk factors. The unplanned reoperation rate of CVJ surgery was 1.58% and the major causes were implant-related failures and wound infection. Patients with posterior occipitocervical fusion or diagnosed with CVJ tumors had an increased risk of unplanned reoperation.

425 Intraoperative Surveillance of the Vertebral Artery Using Indocyanine Green Angiography and Doppler Sonography in Craniovertebral Junction Surgeries

INTRODUCTION: The surgical approach for craniovertebral junction (CVJ) procedures may be complicated for many reasons due to sensitive relationships involved in the surrounding neurovascular structures and complex biomechanical issues. METHODS: In total, 344 consecutive patients enrolled who underwent CVJ surgery. Surgery was performed without intraoperative VA monitoring tools in 262 cases (control group) and with VA monitoring tools in 82 cases (monitoring group). The authors compared the incidence of VAI between groups. The procedure times of ICG angiography, change of VA flow velocity measured by Doppler sonography, and complication were investigated. RESULTS: There were 4 VAI cases in the control group, and the incidence of VAI was 1.5%. Meanwhile, there were no VAI cases in the monitoring group. The procedure time of ICG angiography was less than 5 minutes (mean [±SD] 4.6 ± 2.1 minutes) and VA flow velocity was 11.2 ± 4.5 cm/sec. The combined use of ICG angiography and Doppler sonography was useful not only to monitor VA patency but also to assess the quality of blood flow during CVJ surgery, especially in the high-risk group of patients. CONCLUSIONS: The combined use of ICG angiography and Doppler sonography enables real-time intraoperative monitoring of the VA by detecting blood flow and flow velocity. As the arteries get closer, they provide auditory and visual feedback to the surgeon. This real-time image guidance could be a useful tool, especially for high-risk patients and inexperienced surgeons, to avoid iatrogenic VAI during any CVJ surgery.

Advances, Challenges, and Future Directions in the Management of Craniovertebral Junction Pathologies

In this third article in a three-article series on the craniocervical junction, the authors define the terms basilar impression, cranial settling, basilar invagination, and platybasia, noting that these terms are often used interchangeably but represent distinct entities. They then provide examples that represent these pathologies and treatment paradigms. Finally, they discuss challenges and future direction in the craniovertebral junction surgery space.

Diffuse idiopathic skeletal hyperostosis: A functional enemy of vertebral stability - Case series and surgical consideration of craniovertebral junction involvement.

Diffuse idiopathic skeletal hyperostosis (DISH) or Forestier's syndrome may reduce vertebral mobility, thus affecting the stability of adjacent vertebral segments and promoting spinal stenosis, vertebral dislocation, and unstable fracture secondary to low-energy trauma. This study aimed to contribute with a case series of three patients affected by DISH undergone surgery with occipitocervical fixation for craniovertebral junction (CVJ) instability since the poor literature about CVJ instability and surgery in patients affected by DISH. This was a multicentric case series. Literature about CVJ instability and surgery in patients affected by DISH is poor. Thus, we present a case series of three patients affected by DISH, who underwent surgery with occipitocervical fixation with different clinical and radiological patterns. CVJ represents one of the most mobile joints of the spine and is at greater risk for instability. Moreover, instability itself may act as primum movens for several degenerative conditions such as cervical spondylosis, ossification of the posterior longitudinal ligament, and cervical deformities. On the contrary, DISH itself may worsen CVJ instability because of subaxial spine stiffness. In case of DISH, the rigid unit formed by several ossified vertebral bodies acts as a long lever arm, increasing the forces applied to the hypermobile CVJ and reducing the dynamic buffer capability of ossified spine. On the other hand, vertebral instability increases the odds of fractures. In such cases, CVJ posterior instrumentation and fusion is an effective and feasible surgical technique, aimed to restore vertebral stability and to halt the progression of spinal stenosis. Due to the altered dynamics cervical spine along with the possible comorbidities, treatment indication and surgery for patients affected by DISH must be tailored case by case.

Morphological analysis and morphometry of the occipital condyle and its relationship to the foramen magnum, jugular foramen, and hypoglossal canal: implications for craniovertebral junction surgery.

Anatomical knowledge of the occipital condyle (OC) and its relationships to surrounding structures is important for avoiding injury during craniovertebral junction (CVJ) surgeries. This study was conducted to evaluate the morphology and morphometry of OC and its relationship to foramen magnum, jugular foramen (JF), and hypoglossal canal (HC). Morphometric parameters including length, width, height, and distances from the OC to surrounding structures were measured. The oval-like condyle was the most common OC shape, representing for 33.0% of all samples. The mean length, width and height of OC were 21.3±2.4, 10.5±1.4, and 7.4±1.1 mm, respectively. Moreover, OC was classified into three types based on its length. The most common OC length in both sexes was moderate length or type II (62.5%). The mean distance between anterior tips and posterior tips of OC to basion, and opisthion were 11.5±1.4, 39.1±3.3, 25.2±2.2, and 27.4±2.7 mm, respectively. The location of intracranial orifice of HC was commonly found related to middle 1/3 of OC in 45.0%. JF was related to the anterior 2/3 of OC in 81.0%, the anterior 1/3 of OC in 12.5%, and the entire OC length in 6.5%. These morphological analysis and morphometric data should be taken into consideration before performing surgical operation to avoid CVJ instability and neurovascular structure injury.

Combined Transoral Exoscope and OARM-Assisted Approach for Craniovertebral Junction Surgery. New Trends in an Old-Fashioned Approach.

The introduction of recent innovations in the field of intraoperative imaging and neuronavigation, such as the O-arm StealthStation, allows for obtaining crucial intraoperative data by performing safer and controlled surgical procedures. As part of the improvement of surgical visual magnification and wide expansion of surgical corridors, the 3D 4 K exoscope (EX) has nowadays become an interesting and useful tool. The transoral approach (TOA) is the historical gold-standard direct microsurgical route to ventral craniovertebral junction (CVJ). We herein report our experience, consisting of ten cases via TOA concerning the simultaneous application of an O-arm with a StealthStation navigation system (Medtronic, Memphis, TN) and an imaging system, along with the 3D 4 K exoscopes in the TOA, for the treatment of CVJ pathologies. No intraoperative neurophysiological changes or postoperative infections occurred, but neurological improvement was evident in all the patients. A complete decompression and a stable instrumentation and fusion of the CVJ were accomplished in all cases at the maximum follow-up time. With EX, the role of the surgeon becomes self-sufficient with better individual surgical freedom compared to endoscopic surgery and excellent 3D vision and magnification. O-arms offer absolutely reliable intraoperative support for more-effective CVJ decompression. Nevertheless, with O-arm-assisted neuronavigation, it can be difficult to navigate C1 lateral masses and C2 isthmi, and converting 3D into 2D real-time navigation can be quite complicated. Finally, the combination of an EX with an O-arm appears more time-consuming compared to the old-fashion one.

A Contemporary Clinico-Anatomical Guide to Craniovertebral Junction Surgery.

Background Surgical treatment of ventral and ventrolateral lesions of the craniocervical junction are among the most challenging neurosurgical pathologies to treat. Three surgical techniques, the far lateral approach (and its variations), the anterolateral approach, and the endoscopic far medial approach can be used to approach and resect lesions in this area. Objective The aim of the study is to examine the surgical anatomy of three skull base approaches to the craniocervical junction and review surgical cases to better understand the indications and possible complications for each of these approaches. Methods Cadaveric dissections with standard microsurgical and endoscopic instruments were performed for each of the three surgical approaches, and key steps and surgically relevant anatomy were documented. Six patients with appropriate pre-, post-, and intraoperative imaging and video documentation are presented and discussed accordingly. Results Based on our institutional experience, all three approaches can be utilized to safely and effectively approach a wide variety of neoplastic and vascular pathology. Unique anatomical characteristics, lesion morphology and size, and tumor biology should all be considered when determining the optimal approach. Conclusion Preoperative assessment of surgical corridors with 3D illustrations helps to define the best surgical corridor. 360 degree knowledge of the anatomy of craniovertebral junction allows safe surgical approach and treatment of ventral and ventrolateral located lesions using one of the three approaches.

Prediction of the functional and radiological outcome on the basis of independent factors with special emphasis on the use of 3D printed models in craniovertebral junction surgery.

Background: The aim of the study was to evaluate the advantage of performing planned surgery using customized three-dimensional (3D) printed models versus performing surgery without using 3D printed models in patients with craniovertebral junction (CVJ) anomalies and traumatic CVJ fractures and dislocations.Methods: Forty-two patients with CVJ anomalies, who were planned for operative intervention in the Department of Neurosurgery at SMS Hospital from March 2019 to February 2021, were randomly divided into two groups and analyzed. First group was operated after rehearsal on a customized 3D printed model whereas the second group underwent operative intervention without the rehearsal of surgery on the 3D printed model.Results: Forty-two patients were enrolled for the study. Twenty-five of these patients had developmental CVJ anomalies, 16 had post traumatic Atlantoaxial dislocation (AAD), and one had congenital AAD. Twenty-three patients underwent surgical intervention using 3D printed models and 19 without using 3D printed models. The outcome in the two groups was compared using modified Japanese orthopedic association score (mJOA), recovery rate, incidence of complications such as screw malposition, postoperative neurological deterioration, vertebral artery (VA) injury, and radiological improvement based on Atlanto-Dental interval, the distance of the tip of dens from Wackhenheims clivus canal line, and the distance of tip of dens from the Chamberlain’s line. The improvement in mJOA score postoperatively was found to be statistically significant in study group (P < 0.001) as compared to control group (P = 0.06). Recovery rate was better in study group than in control group (P = 0.023). In study group, the incidence of screw malposition and VA injury was lower than control group. Three patients deteriorated neurologically postoperatively in the control group and none in the study group. The average improvements in the radiological parameters were found to be better in study group as compared to control group postoperatively.Conclusion: The authors conclude that 3D printed models are extremely helpful in analyzing joints and VA anatomy preoperatively and are helpful in unmasking any abnormal bony and vascular anatomy effectively, making the surgeon confident about the placement of the screws intraoperatively. These 3D models help in intraoperative error minimization with better neurological outcomes in postoperative period. In our opinion, these models should be included as a basic investigation tool in patients of CVJ abnormalities. The models also offer other advantages such as preoperative simulation, teaching modules, and patient education.

Arterial Fencing: A Challenge During Complex Craniovertebral Junction Surgery

A 32-year-old woman presented with chronically progressive spastic quadriparesis. Detailed clinicoradiological evaluation led to the diagnosis of irreducible atlantoaxial dislocation and basilar invagination, with associated "kissing" carotids and an anomalous right vertebral artery (VA). Both internal carotid arteries had an abnormally tortuous course, "kissing" retropharyngeally at the level of C1-C2. The right VA became intradural at the level of C2-C3, an extremely rare anomaly-C3 segmental artery. Despite the deformed joints and the possibility of injuring the anomalous right VA during C2-C3 instrumentation, a tailored posterior-only approach was used to circumvent the arterial fence created by both vascular anomalies. The patient underwent bilateral C1-C2 joint opening and left C1-C2 joint spacer placement, followed by bilateral occipito-C3-C4 fixation. This is possibly the first reported case of a complex craniovertebral junction anomaly associated with both kissing carotids and a C3 segmental VA.

Microsurgical Anatomy of the Hypoglossal Nerve in the Lateral Approaches to the Craniovertebral Junction: A Study on Fresh Non-Formalin-Fixed Human Specimens.

The aim of this anatomical study is to describe the anatomy of the hypoglossal nerve (HN) from its origin to the extracranial portion as it appears by performing a combined posterolateral and anterolateral approach to the craniovertebral junction (CVJ). Twelve fresh, non-formalin-fixed adult cadaveric heads (24 sides) were analyzed for the simulation of the combined lateral approach to the CVJ. The HN is divided into three main parts: cisternal, intracanalicular, and extracranial The anatomical relationships between the HN and other nerves, muscles, arteries and veins were carefully recorded, and some measurements were made between the HN and related structures. Thus, various landmarks were determined for the easy identification of the HN. Understanding the detailed anatomy of the HN and its relationships with the surrounding structures is crucial to prevent some complications during CVJ surgery.

O0005. Revision Craniovertebral Junction Surgery by Lateral Mass Plate and Screw Fixation

O0005. Revision Craniovertebral Junction Surgery by Lateral Mass Plate and Screw Fixation

Multidisciplinary approach to the craniovertebral junction. Historical insights, current and future perspectives in the neurosurgical and otorhinolaryngological alliance.

SUMMARYHistorically considered as a nobody’s land, craniovertebral junction (CVJ) surgery or specialty recently gained high consideration as symbol of challenging surgery as well as selective top level qualifying surgery. The alliance between Neurosurgeons and Otorhinolaringologists has become stronger in the time. CVJ has unique anatomical bone and neurovascular structures architecture. It not only separates from the subaxial cervical spine but it also provides a special cranial flexion, extension, and axial rotation pattern. Stability is provided by a complex combination of osseous and ligamentous supports which allows a large degree of motion. The perfect knowledge of CVJ anatomy and physiology allows to better understand surgical procedures of the occiput, atlas and axis and the specific diseases that affect the region. Although many years passed since the beginning of this pioneering surgery, managing lesions situated in the anterior aspect of the CVJ still remains a challenging neurosurgical problem. Many studies are available in the literature so far aiming to examine the microsurgical anatomy of both the anterior and posterior extradural and intradural aspects of the CVJ as well as the differences in all the possible surgical exposures obtained by 360° approach philosophy. Herein we provide a short but quite complete at glance tour across the personal experience and publications and the more recent literature available in order to highlight where this alliance between Neurosurgeon and Otorhinolaringologist is mandatory, strongly advisable or unnecessary.

Usefulness of a Three-Dimensional-Printed Model in the Treatment of Irreducible Atlantoaxial Dislocation with Transoral Atlantoaxial Reduction Plate.

ObjectiveTo evaluate the usefulness of a 3D‐printed model for transoral atlantoaxial reduction plate (TARP) surgery in the treatment of irreducible atlantoaxial dislocation (IAAD).MethodsA retrospective review was conducted of 23 patients (13 men, 10 women; mean age 58.17 ± 5.27 years) with IAAD who underwent TARP from January 2015 to July 2017. Patients were divided into a 3D group (12 patients) and a non‐3D group (11 patients). A preoperative simulation process was undertaken for the patients in the 3D group, with preselection of the TARP system using a 3D‐printed 1:1 scale model, while only imaging data was used for the non‐3D group. Complications, clinical outcomes (Japanese Orthopaedic Association [JOA] and visual analogue score [VAS]), and image measurements (atlas–dens interval [ADI], cervicomedullary angle [CMA], and clivus‐canal angle [CCA]) were noted preoperatively and at the last follow up.ResultsA total of 23 patients with a follow‐up time of 16.26 ± 4.27 months were included in the present study. The surgery duration, intraoperative blood loss, and fluoroscopy times in the 3D group were found to be shorter than those in non‐3D group, with statistical significance. The surgery duration was 3.29 ± 0.45 h in the 3D group and 4.68 ± 0.90 h in the non‐3D group, and the estimated intraoperative blood loss was 131.67 ± 43.03 mL in the 3D group and 185.45 ± 42.28 mL in the non‐3D group. No patients received blood transfusions. The intraoperative fluoroscopy times were 5.67 ± 0.89 in the 3D group and 7.91 ± 1.45 in the non‐3D group. Preoperatively and at last follow up, JOA and VAS scores and ADI, CCA, and CMA were improved significantly within the two groups. However, no statistical difference was observed between the two groups. However, surgical site infection occurred in 1 patient in the 3D group, who underwent an emergency revision operation of the removal of TARP device and posterior occipitocervical fixation; the patient recovered 2 weeks after the surgery. In 2 patients in the traditional group, a mistake occurred in the placement of screws, with no neurological symptoms related to the misplacement.ConclusionPreoperative surgical simulation using a 3D‐printed real‐size model is an intuitive and effective aid for TARP surgery for treating IAAD. The 3D‐printed biomodel precisely replicated patient‐specific anatomy for use in complicated craniovertebral junction surgery. The information was more useful than that available with 3D reconstructed images.

Intraoperative surveillance of the vertebral artery using indocyanine green angiography and Doppler sonography in craniovertebral junction surgeries.

The authors sought to evaluate the usefulness of indocyanine green (ICG) angiography and Doppler sonography for monitoring the vertebral artery (VA) during craniovertebral junction (CVJ) surgery and compare the incidence of VA injury (VAI) between the groups with and without the monitoring of VA using ICG angiography and Doppler sonography. In total, 344 consecutive patients enrolled who underwent CVJ surgery. Surgery was performed without intraoperative VA monitoring tools in 262 cases (control group) and with VA monitoring tools in 82 cases (monitoring group). The authors compared the incidence of VAI between groups. The procedure times of ICG angiography, change of VA flow velocity measured by Doppler sonography, and complication were investigated. There were 4 VAI cases in the control group, and the incidence of VAI was 1.5%. Meanwhile, there were no VAI cases in the monitoring group. The procedure time of ICG angiography was less than 5 minutes (mean [± SD] 4.6 ± 2.1 minutes) and VA flow velocity was 11.2 ± 4.5 cm/sec. There were several cases in which the surgical method had to be changed depending on the VA monitoring. The combined use of ICG angiography and Doppler sonography was useful not only to monitor VA patency but also to assess the quality of blood flow during CVJ surgery, especially in the high-risk group of patients. The combined use of ICG angiography and Doppler sonography enables real-time intraoperative monitoring of the VA by detecting blood flow and flow velocity. As the arteries get closer, they provide auditory and visual feedback to the surgeon. This real-time image guidance could be a useful tool, especially for high-risk patients and inexperienced surgeons, to avoid iatrogenic VAI during any CVJ surgery.

Exoscope and OArm: what we can learn in craniovertebral junction surgery.

Exoscope and OArm: what we can learn in craniovertebral junction surgery.

Reconsideration of the transoral odontoidectomy in complex craniovertebral junction patients with irreducible anterior compression

BackgroundAlthough the single-stage posterior realignment craniovertebral junction (CVJ) surgery could treat most of the basilar invagination (BI) and atlantoaxial dislocation (AAD), there are still some cases with incomplete decompression of the spinal cord, which remains a technique challenging situation.MethodsEleven patients were included with remained myelopathic symptoms after posterior correction due to incomplete decompression of the spinal cord. Transoral odontoidectomy assisted by image-guided navigation and intraoperative CT was performed. Clinical assessment and image measurements were performed preoperatively and at the most recent follow-up.ResultsEleven patients were followed up for an average of 47 months. Symptoms were alleviated in 10 of 11 patients (90.9%). One patient died of an unknown reason 1 week after the transoral approach. The clinical and radiological parameters pre- and postoperatively were reported.ConclusionTransoral odontoidectomy as a salvage surgery is safe and effective for properly selected BI and AAD patients after inadequate indirect decompression from posterior distraction and fixation. Image-guided navigation and intraoperative CT can provide precise information and accurate localization during operation, thus enabling complete resection of the odontoid process and decompression of the spinal cord.