Covalent Organic Framework Films Research Articles

Chiral Covalent Organic Framework Films with Enhanced Photoelectrical Performances.

The desirable superimposed stacking of two-dimensional covalent organic frameworks (2D COFs) benefits out-of-plane charge transfer, whereas the actual stacking deviation cannot leverage the potential of 2D COFs for optoelectrical applications. Herein, we report a chirality-induced strategy to control the parallel AA-stacking sequence for the β-ketoenamine-linked COF film supported on a FTO substrate. The resulting chiral modules are periodically distributed at the framework node, ensuring identical mirrored configurations of layers for parallel stacking. Such unique architectonics exhibit the prolonged charge carrier lifetime, fast charge-transfer dynamics, and ultrahigh electron collection efficiency, thereby allowing for the excellent photocurrent response of 38 μA/cm2 at 0.25 V (vs RHE). The origin of superior performances lies in the intensified exciton gradient distribution and electron density for photoinduced electron-hole dissociation and charge transfer, in stark contrast to achiral analogues. This study highlights the stacking sequence regulated by chiral nanoarchitectonics and promises great potential of chiral COFs in photoelectrical catalysis.

Photochemical and Patternable Synthesis of 2D Covalent Organic Framework Thin Film Using Dynamic Liquid/Solid Interface.

2D covalent organic frameworks (COFs) are highly porous crystalline materials with promising applications in organic electronics. Current methods involve either on-surface synthesis (solid surface) or interfacial synthesis (liquid/liquid, liquid/gas interface) to create thin films for these applications, each with its drawbacks. On-surface synthesis can lead to contamination from COF powder or unreacted chemicals, while interfacial synthesis risks damaging the film during post-transfer processes. These challenges necessitate the development of alternative synthesis methods for high-quality 2D COF films. This study presents a novel approach for synthesizing homogeneous 2D COF thin films by combining photochemistry and a liquid-flowing system. Leveraging previous work on liquid flow systems to prevent contamination during solvothermal synthesis, this approach to the photochemical method, resulting in the synthesis of high-crystalline 2D COF films with tunable thickness is adopted. The photochemical approach offers spatially controllable energy sources, enabling patternable COF synthesis. Notably, it is successfully fabricated ultrasmooth patterned 2D COF films on hexagonal boron nitride, offering a streamlined process for optoelectronic device fabrication without additional pre, post-processing steps.

A versatile photoelectrochemical biosensor based on in-situ grown 2D COFs film for sensitive detection of Hg2+ and aflatoxin B1

Herein, a highly stable and low-toxic photoelectrochemical (PEC) biosensor was constructed based on two-dimensional covalent organic frameworks (COFs) film composed of tris(4-aminophenyl)amine and 1,4-phthalaldehyde connected through imine bonds (TA-P COFs) was grown in situ on the electrode surface under mild conditions for detecting mercury ion (Hg2+) and aflatoxin B1 (AFB1). Impressively, the TA-P COF film adhered to the electrode surface through in-situ growth not only accelerated the charge transfer between the interfaces, but also improved the stability of the biosensor, further improving the accuracy of detection. Accordingly, when the cyclic amplification process was triggered in the presence Hg2+ to generate a large amount of output DNA, the signal probe with abundant quencher porous carbon hollow spheres s (PCHS) was modified on the electrode surface through the output DNA for the signal “OFF” detection of Hg2+. Meanwhile, due to the specific binding of the target to the aptamer, the released hairpin DNA 2 (H2) signal probe was modified on the electrode surface through base complementary pairing to achieve the signal “ON” detection of AFB1. The suggested multifunction biosensor achieved sensitive detection of Hg2+ in the range of 10 fM–100 nM and AFB1 in the range of 10 fg mL−1–10 ng mL−1, which showed great practical application potential in both environmental and food analysis.

One-Dimensional Covalent Organic Framework-Based Multilevel Memristors for Neuromorphic Computing.

Memristors are essential components of neuromorphic systems that mimic the synaptic plasticity observed in biological neurons. In this study, a novel approach employing one-dimensional covalent organic framework (1D COF) films was explored to enhance the performance of memristors. The unique structural and electronic properties of two 1D COF films (COF-4,4'-methylenedianiline (MDA) and COF-4,4'-oxydianiline (ODA)) offer advantages for multilevel resistive switching, which is a key feature in neuromorphic computing applications. By further introducing a TiO2 layer on the COF-ODA film, a built-in electric field between the COF-TiO2 interfaces could be generated, demonstrating the feasibility of utilizing COFs as a platform for constructing memristors with tunable resistive states. The 1D nanochannels of these COF structures contributed to the efficient modulation of electrical conductance, enabling precise control over synaptic weights in neuromorphic circuits. This study also investigated the potential of these COF-based memristors to achieve energy-efficient and high-density memory devices.

One‐Dimensional Covalent Organic Framework‐Based Multilevel Memristors for Neuromorphic Computing

AbstractMemristors are essential components of neuromorphic systems that mimic the synaptic plasticity observed in biological neurons. In this study, a novel approach employing one‐dimensional covalent organic framework (1D COF) films was explored to enhance the performance of memristors. The unique structural and electronic properties of two 1D COF films (COF‐4,4′‐methylenedianiline (MDA) and COF‐4,4′‐oxydianiline (ODA)) offer advantages for multilevel resistive switching, which is a key feature in neuromorphic computing applications. By further introducing a TiO2 layer on the COF‐ODA film, a built‐in electric field between the COF‐TiO2 interfaces could be generated, demonstrating the feasibility of utilizing COFs as a platform for constructing memristors with tunable resistive states. The 1D nanochannels of these COF structures contributed to the efficient modulation of electrical conductance, enabling precise control over synaptic weights in neuromorphic circuits. This study also investigated the potential of these COF‐based memristors to achieve energy‐efficient and high‐density memory devices.

The Transfer Dehydrogenation Method Enables a Family of High Crystalline Benzimidazole‐linked Cu (II)‐phthalocyanine‐based Covalent Organic Frameworks Films

AbstractHeterocycle‐linked phthalocyanine‐based COFs with close‐packed π–π conjugated structures are a kind of material with intrinsic electrical conductivity, and they are considered to be candidates for photoelectrical devices. Previous studies have revealed their applications for energy storage, gas sensors, and field‐effect transistors. However, their potential application in photodetector is still not fully studied. The main difficulty is preparing high‐quality films. In our study, we found that our newly designed benzimidazole‐linked Cu (II)‐phthalocyanine‐based COFs (BICuPc‐COFs) film can hardly formed with a regular aerobic oxidation method. Therefore, we developed a transfer dehydrogenation method with N‐benzylideneaniline (BA) as a mild reagent. With this in hand, we successfully prepared a family of high crystalline BICuPc‐COFs powders and films. Furthermore, both of these new BICuPc‐COFs films showed high electrical conductivity (0.022–0.218 S/m), higher than most of the reported COFs materials. Due to the broad absorption and high conductivity of BICuPc‐COFs, synaptic devices with small source‐drain voltage (VDS=1 V) were fabricated with response light from visible to near‐infrared. Based on these findings, we expect this study will provide a new perspective for the application of conducting heterocycle‐linked COFs in synaptic devices.

The Transfer Dehydrogenation Method Enables a Family of High Crystalline Benzimidazole-linked Cu (II)-phthalocyanine-based Covalent Organic Frameworks Films.

Heterocycle-linked phthalocyanine-based COFs with close-packed π-π conjugated structures are a kind of material with intrinsic electrical conductivity, and they are considered to be candidates for photoelectrical devices. Previous studies have revealed their applications for energy storage, gas sensors, and field-effect transistors. However, their potential application in photodetector is still not fully studied. The main difficulty is preparing high-quality films. In our study, we found that our newly designed benzimidazole-linked Cu (II)-phthalocyanine-based COFs (BICuPc-COFs) film can hardly formed with a regular aerobic oxidation method. Therefore, we developed a transfer dehydrogenation method with N-benzylideneaniline (BA) as a mild reagent. With this in hand, we successfully prepared a family of high crystalline BICuPc-COFs powders and films. Furthermore, both of these new BICuPc-COFs films showed high electrical conductivity (0.022-0.218 S/m), higher than most of the reported COFs materials. Due to the broad absorption and high conductivity of BICuPc-COFs, synaptic devices with small source-drain voltage (VDS=1 V) were fabricated with response light from visible to near-infrared. Based on these findings, we expect this study will provide a new perspective for the application of conducting heterocycle-linked COFs in synaptic devices.

Scalable, Interfacially Synthesized, Covalent-Organic Framework (COF)-Based Thin-Film Composite (TFC) Hollow Fiber Membranes for Organic Solvent Nanofiltration (OSN).

Covalent organic frameworks have great potential for energy-efficient molecular sieving-based separation. However, it remains challenging to implement COFs as an alternative membrane material due to the lack of a scalable and cost-effective fabrication mechanism. This work depicts a new method for fabricating a scalable in situ COF hollow fiber (HF) membrane by an interfacial polymerization (IP) approach at room temperature. The 2D COF film was constructed on a polyacrylonitrile HF substrate using aldehyde (1,3,5-trimethylphloroglucinol, Tp) and amine (4,4'-azodianiline (Azo) and 4,4',4″-(1,3,5-triazine- 2,4,6-triyl) trianiline (Tta)) as precursors. The COF membrane on the PAN substrate showed 99% rejection of Direct red-80 with remarkable solvent permeance. The rejection analysis revealed that the structural aspects of the solute molecule play a major role in rejection rather than the molecular weight. We further optimized the precursor concentrations to improve the permeation performance of the resulting membrane. The durability study reveals excellent stability of the membrane toward organic solvents. This study also demonstrated the easy scalability of the membrane fabrication approach. The approach was further extrapolated to fabricate a cation-based COF membrane. These charged membranes exhibited an enhanced rejection performance. Finally, this approach can facilitate industrially challenging molecular sieving applications using COF-based membranes.

Dynamic Insights into the Growth Mechanisms of 2D Covalent Organic Frameworks on Graphene Surfaces.

Producing high-quality two-dimensional (2D) covalent organic frameworks (COFs) is crucial for industrial applications. However, this remains significantly challenging with current synthetic techniques. A deep understanding of the intermolecular interactions, reaction temperature, and oligomers is essential to facilitate the growth of highly crystalline COF films. Herein, molecular dynamics simulations were employed to explore the growth of 2D COFs from monomer assemblies on graphene. Our results showed that chain growth reactions dominated the COF surface growth and that van der Waals (vdW) interactions were important in enhancing the crystallinity through monomer preorganization. Moreover, appropriately tuning the reaction temperature improved the COF crystallinity and minimized the effects of amorphous oligomers. Additionally, the strength of the interface between the COF and the graphene substrate indicated that the adhesion force was proportional to the crystallinity of the COF. This work reveals the mechanisms for nucleation and growth of COFs on surfaces and provides theoretical guidance for fabricating high-quality 2D polymer-based crystalline nanomaterials.

Synergistically regulating Zn-ion flux and accelerating ion transport kinetics via zincophilic covalent organic framework interlayer for stable Zn metal anode

Zn metal is considered as an ideal anode for aqueous zinc-ion batteries (AZIBs) owing to the inherent merits of low cost, high theoretical capacity, and remarkable safety. However, the formation of Zn dendrites and water-induced parasitic reactions hamper the commercialization of AZIBs. Herein, a synergetic strategy to accelerate ion transfer kinetics and regulate Zn-ion flux has been proposed to achieve dendrite-free Zn anodes via a series of zincophilic covalent organic framework (COF) films. The nanoporous and mechanically stable COF films synthesized by the liquid–liquid interfacial polymerization can be straightforward transferred on the Zn foil surface through a dip-coating technique. Benefiting from the affinity between Zn2+ and electron-rich ketone, the zincophilic COF interlayers promote the de-solvation of hydrated Zn2+, simultaneously offer ample Zn2+ transport channels to facilitate rapid diffusion and regulating a homogenous Zn2+ flux, thereby inhibiting the dendritic growth and leading to the uniform Zn deposition. Additionally, the COF films with strong adherence and large surface area effectively separate Zn anodes from bulk aqueous electrolytes, inhibiting the water-induced corrosion reactions. As a result, the symmetric cell with COF-modified Zn anode exhibited a stable cycling lifetime more than 900 h at 1 mA∙cm−2 and 1 mAh∙cm−2, accompanied by a low voltage polarization of merely 74.3 mV. As a simple approach to synergistically restrict Zn-ion flux and enhance ion transport kinetics using zincophilic COF films via interfacial synthesis, this work would provide new insights into developing highly stable Zn anodes.

Construction of Layer-Blocked Covalent Organic Framework Heterogenous Films via Surface-Initiated Polycondensations with Strongly Enhanced Photocatalytic Properties.

Imine-linked covalent organic frameworks (COFs) usually show high crystallinity and porosity, while vinyl-linked COFs have excellent semiconducting properties and stability. Therefore, achieving the advantages of imine- and vinyl-linkages in a single COF material is highly interesting but remains challenging. Herein, we demonstrate the fabrication of a layer-blocked COF (LB-COF) heterogeneous film that is composed of imine- and vinyl-linkages through two successive surface-initiated polycondensations. In brief, the bottom layer of imine-linked COF film was constructed on an amino-functionalized substrate via Schiff-base polycondensation, in which the unreacted aldehyde edges could be utilized for initiating aldol polycondensation to prepare the second layer of vinyl-linked COF film. The resultant LB-COF film displays excellent ordering due to the crystalline templating effect from the bottom imine-linked COF layer; meanwhile, the upper vinyl-linked COF layer could strongly enhance its stability and photocatalytic properties. The LB COF also presents superior performance in photocatalytic uranium extraction (320 mg g-1), which is higher than the imine-linked (35 mg g-1) and the vinyl-linked (295 mg g-1) counterpart. This study provides a novel surface-initiated strategy to synthesize layer-blocked COF heterogeneous films that combine the advantages of each building block.

Solid‐Liquid Interfacial Engineered Large‐Area Two‐Dimensional Covalent Organic Framework Films

AbstractConstructing uniform covalent organic framework (COF) film on substrates for electronic devices is highly desirable. Here, a simple and mild strategy is developed to prepare them by polymerization on a solid‐liquid interface. The universality of the method is confirmed by the successful preparation of five COF films with different microstructures. These films have large lateral size, controllable thickness, and high crystalline quality. And COF patterns can also be directly achieved on substrates via hydrophilic and hydrophobic interface engineering, which is in favor of preparing device array. For application studies, the PyTTA‐TPA (PyTTA: 4,4′,4′′,4′′′‐(1,3,6,8‐Tetrakis(4‐aminophenyl)pyrene and TPA: terephthalaldehyde) COF film has a high photoresponsivity of 59.79 μA W−1 at 420 nm for photoelectrochemical (PEC) detection. When employed as an active material for optoelectronic synaptic devices for the first attempt, it shows excellent light‐stimulated synaptic plasticity properties such as short‐term plasticity (STP), long‐term plasticity (LTP), and the conversion of STP to LTP, which can be used to simulate biological synaptic functions.

Solid-Liquid Interfacial Engineered Large-Area Two-Dimensional Covalent Organic Framework Films.

Constructing uniform covalent organic framework (COF) film on substrates for electronic devices is highly desirable. Here, a simple and mild strategy is developed to prepare them by polymerization on a solid-liquid interface. The universality of the method is confirmed by the successful preparation of five COF films with different microstructures. These films have large lateral size, controllable thickness, and high crystalline quality. And COF patterns can also be directly achieved on substrates via hydrophilic and hydrophobic interface engineering, which is in favor of preparing device array. For application studies, the PyTTA-TPA (PyTTA: 4,4',4'',4'''-(1,3,6,8-Tetrakis(4-aminophenyl)pyrene and TPA: terephthalaldehyde) COF film has a high photoresponsivity of 59.79 μA W-1 at 420 nm for photoelectrochemical (PEC) detection. When employed as an active material for optoelectronic synaptic devices for the first attempt, it shows excellent light-stimulated synaptic plasticity properties such as short-term plasticity (STP), long-term plasticity (LTP), and the conversion of STP to LTP, which can be used to simulate biological synaptic functions.

Opportunity and Challenge of Emerging COFs in Chemiresistive Sensing for Gas and Humidity

AbstractNovel 2D materials for chemiresistive sensors are attractive due to their large surface area and structure diversity. Covalent organic frameworks (COFs) have received much attention due to their unique properties, including the abundant choice of organic building units, permanent pore structure and crystallinity, which show huge potential of implement in gas and humidity detection in complex environment. Recently, the development of the synthesis and modification methods for COFs powder and film contributes to the sensitivity and compatibility in chemiresistive sensors and integrated devices. In the present review, the current synthesis methods of COFs powder and film as well as their application in the chemiresistive sensors are summarized. The current challenge and future modification strategy are discussed for the further development of COFs as active materials in gas and humidity sensors.

Covalent-organic framework film: From synthesis and structure to energy, catalysis and sensor applications

Films are used a lot in nature, especially with animals and plants. With the development of film technology, it is becoming more popular and being used applied in many fields. There has been a growing trend to make covalent-organic framework (COF) films, which was inspired by the development of COF. Compare with traditional polymer, COF is a new polymer form that not only has high stability, but also functional diversity and designability. With these characteristics, COF film will create new possibilities for many applications. In this review, we summarize the major progress made on the synthetic strategies of COF film and their applications in energy, catalysis, and sensor application. Finally, we discuss the existing issues and future direction.

Orientation and morphology control in acid-catalyzed covalent organic framework thin films.

As thin films of semiconducting covalent organic frameworks (COFs) are demonstrating utility for ambipolar electronics, channel materials in organic electrochemical transistors (OECTs), and broadband photodetectors, control and modulation of their thin film properties is paramount. In this work, an interfacial growth technique is utilized to synthesize imine TAPB-PDA COF films at both the liquid-liquid interface as well as at the liquid-solid interface on a Si/SiO2 substrate. The concentration of acetic acid catalyst in the aqueous phase is shown to significantly influence the thin film morphology of the liquid-solid growth, with concentrations below 1 M resulting in no film nucleation, concentrations of 1-4 M enabling smooth film formation, and concentrations greater than 4 M resulting in films with a higher density of particulates on the surface. Importantly, while the films grown at the liquid-liquid interface are mixed-orientation, those grown directly at the liquid-solid interface on the Si/SiO2 surface have highly oriented COF layers aligned parallel to the substrate surface. Moreover, this liquid-solid growth process affords TAPB-PDA COF thin films with p-type charge transport having a transconductance of 10 μS at a gate voltage of -0.9 V in an OECT device structure.

Low band gap semiconducting covalent organic framework films with enhanced photocatalytic hydrogen evolution

A contrasting photocatalytic mechanism was observed for semiconducting covalent organic frameworks (COFs). J-type aggregation favors exciton migration in the powder state, while charge transport governs the photocatalytic activity in the films.

Adjustable Plane Curvature of Covalent Organic Framework Enabling Outstanding Dielectric, Electret, and High‐Temperature Processing Properties

AbstractWith the rapid development of integrated circuits towards miniaturization and complexity, there is an urgent need for materials with low dielectric constant/loss and high processing temperatures to effectively prevent signal delay and crosstalk. With high porosity, thermal stability, and easy structural modulation, covalent organic frameworks have great potential in the field of low dielectric materials. However, the optimization of dielectric properties by modulating the conjugated/plane curvature structure of covalent organic frameworks (COFs) has rarely been reported. Accordingly, we herein innovatively prepare COF films with adjustable planar curvature, hence possessing ultralow dielectric constant (1.9 at 1 kHz), ultralow dielectric loss at 1 kHz (0.0029 at room temperature, 0.0052 at 200 °C), high thermal decomposition temperature (5 % weight loss temperature, 473 °C) and good hydrophobicity (water contact angle, 105.3°). Also, to the best of our knowledge, we are the first to report that the resulting COF film enables high surface potential (≈320 V) for one week, attributing to its intrinsic high porosity, thus presenting great potential in electret applications. Accordingly, this innovative work provides a readily available and scalable idea to prepare materials with comprehensively excellent dielectric and electret properties as well as high processing temperatures simultaneously for advanced electronic device applications.

Highly Flexible Dielectric Films from Solution Processable Covalent Organic Frameworks.

Covalent organic frameworks (COFs) are known to be a promising class of materials for a wide range of applications, yet their poor solution processability limits their utility in many areas. Here we report a pore engineering method using hydrophilic side chains to improve the processability of hydrazone and β-ketoenamine-linked COFs and the production of flexible, crystalline films. Mechanical measurements of the free-standing COF films of COF-PEO-3 (hydrazone-linked) and TFP-PEO-3 (β-ketoenamine-linked), revealed a Young's modulus of 391.7 MPa and 1034.7 MPa, respectively. The solubility and excellent mechanical properties enabled the use of these COFs in dielectric devices. Specifically, the TFP-PEO-3 film-based dielectric capacitors display simultaneously high dielectric constant and breakdown strength, resulting in a discharged energy density of 11.22 J cm-3 . This work offers a general approach for producing solution processable COFs and mechanically flexible COF-based films, which hold great potential for use in energy storage and flexible electronics applications.

Highly Flexible Dielectric Films from Solution Processable Covalent Organic Frameworks**

AbstractCovalent organic frameworks (COFs) are known to be a promising class of materials for a wide range of applications, yet their poor solution processability limits their utility in many areas. Here we report a pore engineering method using hydrophilic side chains to improve the processability of hydrazone and β‐ketoenamine‐linked COFs and the production of flexible, crystalline films. Mechanical measurements of the free‐standing COF films of COF‐PEO‐3 (hydrazone‐linked) and TFP‐PEO‐3 (β‐ketoenamine‐linked), revealed a Young's modulus of 391.7 MPa and 1034.7 MPa, respectively. The solubility and excellent mechanical properties enabled the use of these COFs in dielectric devices. Specifically, the TFP‐PEO‐3 film‐based dielectric capacitors display simultaneously high dielectric constant and breakdown strength, resulting in a discharged energy density of 11.22 J cm−3. This work offers a general approach for producing solution processable COFs and mechanically flexible COF‐based films, which hold great potential for use in energy storage and flexible electronics applications.