Coupling Reaction Of Alkynes Research Articles

Water-catalyzed iron-molybdenum carbyne formation in bimetallic acetylene transformation

Transition metal carbyne complexes are of fundamental importance in carbon-carbon bond formation, alkyne metathesis, and alkyne coupling reactions. Most reported iron carbyne complexes are stabilized by incorporating heteroatoms. Here we show the synthesis of bioinspired FeMo heterobimetallic carbyne complexes by the conversion of C2H2 through a diverse series of intermediates. Key reactions discovered include the reduction of a μ-η2:η2-C2H2 ligand with a hydride to produce a vinyl ligand (μ-η1:η2-CH = CH2), tautomerization of the vinyl ligand to a carbyne (μ-CCH3), and protonation of either the vinyl or the carbyne compound to form a hydrido carbyne heterobimetallic complex. Mechanistic studies unveil the pivotal role of H2O as a proton shuttle, facilitating the proton transfer that converts the vinyl group to a bridging carbyne.

Photo-catalyzed dearomative coupling of benzylmalonates and alkynes with CO2 leading to spiro-1,4-cyclohexadiene carboxylic acids

A dearomative coupling reaction of benzylmalonates and alkynes with CO2via visible-light catalysis is developed, leading to a series of spiro-1,4-cyclohexadiene carboxylic acids. This three-component transformation achieves sequential dearomatization, alkenylation, and carboxylation of non-activated bezene ring, building spiro architecture and installing two functional groups in one reaction step. The strategy has the advantages of mild conditions, broad substrate scope, low loading of photocatalyst, redox neutral, excellent yield and high selectivity. Gram-scale reaction and product derivatizations indicate promising application prospects. Mechanistic studies reveal that the reaction might proceed through tandem radical addition, dearomatization and nucleophilic addition.

Cascade C-H Activation and Two C-C Bond Forming in Reaction of Azalutetacyclopentadiene with 2-Methylbenzonitriles.

Azametallacyclopentadienes are an important class of metallacycles as the key intermediates in metal-promoted or catalyzed carbon-carbon coupling reaction of nitriles and alkynes. Rare-earth azametallacyclopentadienes have shown various reactivity toward nitriles, depending on the substituents of nitriles. The reaction of azalutetacyclopentadienes toward 2-methylbenzonitriles has been investigated in this work, which selectively affords the fused 7-5-6-membered azalutetacycles as products. Computational studies reveal that the reaction of azalutetacyclopentadienes toward 2-methylbenzonitriles selectively initiates with the remote activation of the benzylic C-H bond by the Lu-N bond, followed by the intramolecular nucleophilic attack from the deprotonated benzylic carbon to form a C-C bond. Subsequently, the high ring strain promoted the generation of the uncoordinated carbanion dissociated from the lutetium center, which then undergoes intramolecular nucleophilic attack toward C=N triple bond to give the final product containing fused 7-5-6-membered azalutetacycle. This work not only achieves highly selective three-step cascade reaction to form a unique class of rare-earth metallacycle, but also provides a new idea for the transformation of unsaturated substrates with C-H bonds that can be activated.

Yolk-Shell Au NPs@Carbon Porous Nanoreactors Derived from ZIF-8: A High-Efficiency Catalyst for Three-Component Coupling Reaction.

A yolk-shell Au NPs@carbon porous nanoreactor with an active gold (Au) core and a porous carbon shell has been fabricated and demonstrates excellent high activity and cyclic stability as a heterogeneous catalyst for the three-component coupling reaction of aldehyde, amine, and alkyne. Remarkably, the unique yolk-shell nanostructure can protect gold nanoparticles (Au NPs) from aggregation, allow for efficient mass transport, and benefit substrate enrichment, giving rise to enhanced activity, stability, and recyclability.

Copper-Catalyzed Multicomponent Coupling Reaction of Primary Aromatic Amines, Rongalite, and Alkynes: Access to N-Aryl Propargylamines.

In this work, a practical copper-catalyzed multicomponent coupling reaction of primary aromatic amines, rongalite, and alkynes for the direct synthesis of N-aryl propargylamines has been developed. This method could overcome the substrate limitation in A3 coupling reactions of primary aromatic amines, formaldehyde, and alkynes. Mechanistic studies revealed that rongalite acts as not only the active C1 unit but also the accelerator to activate the in situ-generated N-arylmethanimines for the coupling reaction with alkynes. This coupling reaction is highly efficient and features a broad substrate scope, as well as utility with scale-up synthesis and converting the corresponding product N-aryl propargylamines into useful heterocyclic skeletons.

The Inorganic Ligand‐Supported Copper Catalyst Catalyzing Alkyne Coupling Reactions

AbstractGlaser‐coupled synthesized 1,3‐diyne can participate in the generation of conjugated polymers and is now widely used in organic and polymer synthesis. Currently, the catalyst in coupling are mostly based on the complexation of noble metals with complex organic ligands, which inevitably increases the research cost and storage difficulty. However, polyoxometalates (POMs), with acidic and redox properties, can be used as an excellent inorganic ligands with low cost and easy storage. In this work, we have synthesized copper catalyst 1, (NH4)4[CuMo6O18(OH)6] with polyoxometalates as inorganic ligands in a facile way and applied them in the coupling of alkynes to obtain (non)symmetrical conjugated 1,3‐diynes in high yields without bases, finally proposing a reasonable reaction path. In addition, the catalyst showed good tolerance to a variety of different groups, further demonstrating its excellent catalytic activity. It is worth mentioning that the catalyst maintained its good structure and activity after six cycles, demonstrating its promising potential for industrial applications. Thus, this paper provides a new strategy for the preparation of (un)symmetrical diynes using polyoxometalates of Cu as catalyst, and also demonstrates the potential of multi‐acid catalyst for organocatalytic applications.

Design of a Copper(II) Complex with Tetradentate Bis‐Benzotriazole‐Appended Bipyridine Ligand and its Catalytic Application in A3 Coupling Reaction

AbstractIn this report, a Cu(II) complex Cu‐L4 containing a new tetradentate benzotriazole‐appended bipyridine ligand was synthesized and characterized fully via spectroscopic and crystallographic techniques. The crystal structure of the complex revealed that the ligand is bound to copper in a tetradentate fashion in a plane and the axial positions are occupied by an anion and a solvent molecule, resulting in a distorted octahedral geometry of the complex in solid‐state. This air‐stable complex was utilized as homogeneous precatalyst for the synthesis of several propargylamine derivatives by 3‐component A3 coupling reactions of aldehydes, amines, and alkynes under aerial atmosphere.

N‐Heterocyclic Olefin‐Phosphines Based Cationic Ruthenium Complexes as Pre‐Catalysts for Dual C−H Bond Functionalizations

AbstractTwo N‐heterocyclic olefin‐phosphines (NHOP), and the corresponding ruthenium complexes were synthesized and structurally characterized. One of the cationic complexes [(BzIM)(NHOP)Ru(p‐cymene)Cl2]I was employed as a catalyst in N‐benzylbenzamides/alkyne coupling reactions. With this catalytic protocol a variety of substituted isoquinolones were synthesized through ortho‐selective double C−H bond functionalization involving oxidative annulation followed by olefination reactions. All these products were achieved in one‐pot manner without the use of additives.

Synthesis and catalytic activity of silver N-heterocyclic carbene complexes based on bis(3,5-dimethylpyrazol-1-yl)methyl-substituted pyridylimidazole

A series of N-heterocyclic carbene (NHC) silver complexes derived from 6-[bis(3,5-dimethylpyrazol-1-yl)methyl]-2-pyridylimidazole have been synthesized and characterized by physico-chemical and spectroscopic methods, and the structures of four complexes have been confirmed by X-ray structural analyses. The functionalized NHC is a monodentate ligand in (NHC)AgCl through the carbene carbon atom, and a bridging [C,N,N] tridentate ligand in (NHC)2Ag2(BF4)2 and (NHC)2Ag2(PF6)2 through two pyrazolyl nitrogens and the carbene carbon to form a metallomacrocycle, in which a head (carbene)– to tail (nitrogen) coordination mode to two silver atoms is observed. Preliminary catalytic tests show that these newly synthesized Ag–NHC complexes exhibit excellent catalytic activity at a low catalyst loading (0.1–1 mol%) in the aldehyde–amine–alkyne coupling reaction.

Immobilized nickel nanoparticles on modified magnetic titanium dioxide: A proficient and eco-friendly nanocatalyst for the green A3-coupling synthesis of propargylamines

In this research, a novel and highly efficient magnetic catalyst was synthesized by surface modification of Fe3O4/TiO2 with epibromohydrine and N-(2-aminoethyl)piperazine linkers and then by immobilization of Ni nanoparticles onto the surface of magnetic titanium dioxide. The synthesized Fe3O4/TiO2-EP-NAEP/Ni nanocomposite was identified by FT-IR, PXRD, TEM, FE-SEM, ICP, EDX, TGA, and VSM techniques, and its catalytic performance was investigated in an A3 coupling reaction of amines, various aldehyde, and terminal alkynes in solvent-free conditions and propargylamine derivatives was gained with excellent yields. Also, the catalyst has high recyclability and can be reused at least six times in the synthesis of propargylamine derivatives with good yields.

Choosing between Ti(II) and Ti(III): selective reduction of titanocene dichloride by elemental lanthanides.

The reduction of titanocene dichloride Cp2TiCl2 with lanthanide metals has led to the discovery of a surprising lanthanide effect: while with most lanthanides, a divalent [Cp2Ti] equivalent was obtained, the use of samarium or ytterbium only led to the reduction to trivalent [Cp2TiCl]-type complexes, including the structurally characterized heterobimetallic complex [Cp2Ti(μ-Cl)2SmCl2(THF)3]. These results were corroborated by reactivity studies (alkyne coupling and radical reactions), EPR spectroscopy and electrospray mass spectrometry, providing new insights into the reduction chemistry of lanthanide metals.

Construction of fully π-conjugated, diyne-linked conjugated microporous polymers based on tetraphenylethene and dibenzo[g,p]chrysene units for energy storage

Using a palladium-catalyzed alkyne–alkyne coupling reaction, we successfully synthesized a TPE-Diyne CMP as an organic electrode for supercapacitor applications.

Synthesis of propargylamines catalyzed by in situ generated copper nanoparticles in water

An efficient and green protocol for the A3 coupling reaction of aldehyde, amine and alkyne involves the use of copper nanoparticles and β-cyclodextrin in water. The copper nanoparticles are generated in situ by reduction with green and cheap sodium hydroxymethanesulfinate (rongalite) while β-cyclodextrin serves as a stabilizing agent and a phase-transfer catalyst.

Pyridine–SO3H]ZnCl3: A Multipurpose Catalyst for A3 Coupling Synthesis of Propargylamines under Mild Conditions

Abstract N-Sulfopyridin-1-ium monozinc(II) trichloride ([NSPy]ZnCl3) was prepared and used as a multipurpose catalyst for the synthesis of propargylamines by the A3 coupling reaction of aromatic aldehydes, alkynes, and secondary amines under mild conditions. In this reaction, the carbonyl group in the aldehyde was activated by the acidic part in the catalyst, and the C–H activation of phenylacetylene was carried out by zinc.

Catalytic Asymmetric Synthesis of Zinc Metallacycles.

Transition-metal-catalyzed reductive coupling reactions of alkynes and imines are attractive methods for the synthesis of chiral allylic amines. Mechanistically, these reactions involve oxidative cyclization of the alkyne and the imine to generate a metallacyclic intermediate, which then reacts with H2 or a H2 surrogate to form the product. As an alternative to this hydrogenolysis pathway, here we show that transmetalation to zinc can occur, forming a zinc metallacycle product. This organozinc product serves as a versatile nucleophile for carbon-carbon and carbon-heteroatom coupling reactions. Mechanistic studies based on isotopic labeling experiments and DFT calculations suggest that the key transmetalation step occurs between a Co(II) species and ZnCl2.

A sustainable avenue for the synthesis of propargylamines and benzofurans using a Cu-functionalized MIL-101(Cr) as a reusable heterogeneous catalyst

A heterogeneous copper-catalyzed A3 coupling reaction of aldehydes, amines, and alkynes for the synthesis of propargylamines and benzofurans has been developed. Here, the modified metal–organic framework MIL-101(Cr)-SB-Cu complex was chosen as the heterogeneous copper catalyst and prepared via post-synthetic modification of amino-functionalized MIL-101(Cr). The structure, morphology, thermal stability, and copper content of the catalyst were determined by FT-IR, PXRD, SEM, TEM, EDX, TGA, XPS, and ICP-OES. The catalyst shows high catalytic activity for the aforementioned reactions under solvent-free reaction conditions. High yields, low catalyst loading, easy catalyst recovery and reusability with not much shrink in catalytic activity, and a good yield of 82% in gram-scale synthesis are some of the benefits of this protocol that drove it towards sustainability.

Electron-modulating effects of intercalating molecules in functionalized graphene oxide: Optimizing the coordination microenvironment of Ag nanoparticles for efficient catalytic A3 coupling reactions

In this paper, functionalized graphene oxide (GO) nanosheets were modified by forming benzamide (BzA) bonds using aniline with different substituents (4-tertbutylaniline, 4-nitroaniline, aniline) as intercalating molecules. Then the Ag@R-BzA/GO composite catalysts were prepared by loading Ag nanoparticles to reveal the electronic modulation of functionalized graphene oxide interfaces by aniline molecules effects with different substituents. The experimental results showed that the layer spacing of the composites obtained after intercalation with aniline whose substituent is an electron-giving group increased by about 40%. Moreover, the electron donating role of tert‑butyl regulates the charge distribution on the graphene oxide material and provides a good coordination environment for the loading of Ag nanoparticles. AgNPs are stably present in the interlayer of graphene oxide nanosheets by ligating with amide bonds and oxygen-containing functional groups to produce strong metal-carrier interactions. Ag@4‑tert-BzA/GO composites showed high catalytic activity in the A3 coupling reaction of aldehydes, alkynes and amines for the synthesis of alkynylamines(TON=19225.82). The electronic effect of the substituent groups on the intercalated molecules reported in this paper is a modulation on the molecular and atomic scale, which provides a new idea for the modulation of the microenvironment in metal-loaded catalysts.

Green Synthesis of Nd2sn2o7 Nanostructures Using Gum of Ferula Assa-Feotida for the Fabrication of 3a,4-dihydronaphtho[2,3-c]furan-1(3H)-One

Here, first, the Nd2Sn2O7 NPs were greenly generated in the participation of gum of ferula assa-feotida of SnCl4.5H2O and Nd(NO3)3. The uncontrolled release of CO2 by industrial processes that acidify the oceans and warm the planet has prompted scientists to try different methods to capture CO2 directly from wastewater sources. Considering the morphology of Nd2Sn2O7 NPs, an appropriate exterior layer for CO2 imbibition was created in all catalyst sites. Findings disclosed that Nd2Sn2O7 NPs positively affected the fabrication yield of 3a,4-dihydronaphtho[2,3-c]furan-1(3H)-one through a three-factor coupling reaction of alkynes, allylic chlorides, and carbon dioxide. The technique enjoyed profitable performance and forbearance of functional groups.

Progress of Azametallacyclopentadienes in the New Century.

As the key intermediates in metal-promoted/catalyzed C-C bond coupling reactions of nitriles and alkynes, azametallacyclopentadienes, M(N=CR1 -CR2 =CR3 ), are an important class of azametallacycles. Although the first authentic azametallacyclopentadienes were documented in 1986, their chemistry towards solid-state structures, intrinsic reactivity, and synthetic application was rarely investigated for a long time. At the beginning of this century, seminal works about the applications of azametallacyclopentadienes in the synthesis of heterocycles, including multi-substituted pyridines, isoquinolines, furans, and pyrroles were reported. Subsequently, a series of new complexes with this motif, namely the Group 4, aluminum, actinide, and rare-earth azametallacyclopentadienes were isolated and structurally characterized. Among them, the rare-earth azametallacyclopentadiene expresses high reactivity towards unsaturated molecules, such as nitriles, isocyanides, and Mo(CO)6 to provide novel fused metallacycles. In this Concept, we reviewed the advances in the preparation, reactivity, and synthetic application of azametallacyclopentadienes in the past twenty years.

Insights into the Three-Component Coupling Reactions of Aldehydes, Alkynes, and Amines Catalyzed by N-heterocyclic Carbene Silver: A DFT Study

Density functional theory (DFT) was used to investigate the three-component coupling reactions of aldehydes, alkynes, and amines (A3 coupling) using N-heterocyclic carbene silver as the catalyst. This study reveals that the addition reaction between the catalyst N-heterocyclic carbene silver and phenylacetylene (PAE) forms Ag_PAE. Subsequently, one hydrogen atom of the Ag_PAE migrates to the nitrogen atom of the Amine. Thereafter, the amine aldehyde condensation reaction generates a molecule of water and an imine ion with (Path one) or without (Path two) another amine catalyst. Path one has a lower reaction barrier than Path two. Subsequently, the imine ion reacts with silver phenylacetylide to generate the A3 coupling reaction product propargylamine (PPA). Furthermore, the triple bond and −N3 group in PPA undergo a cycloaddition reaction and generate the final product (PR). The entire reaction is strongly exothermic, and, therefore, the reaction is easy to conduct. Moreover, conceptual density functional theory calculations confirm the reaction mechanism. Investigating the mechanism of these reactions will be helpful for understanding and developing new synthesis strategies for similar functional compounds.