Cotton T-shirt Research Articles

Decorative 3D printing on textiles using elastomer TPU filament under different printing conditions

PurposeNew sustainable approaches to fashion products are needed due to the demand for customization, better quality and cost reduction. Therefore, the decoration of fashion products using 3D printing technology can create a new direction for manufacturing science.Design/methodology/approachThis study aims to optimize the 3D printing of soft TPU material on textiles. In the past decade, trials of using 3D printing in tailored fashion products have been done due to the 3D printing simplicity, low cost of materials and time reduction. Therefore, soft polymers can be multi-layer stepped-deposited smoothly with the fused filament fabrication process.FindingsEven though there have been many attempts in the literature to 3D print multilayer polymer filaments directly onto textile fabrics by special-purpose 3D printers, only a few reports of decorative or personalized artefact 3D printing using open-platform filament material extrusion 3D printers. Printing speed, nozzle Z distance, textile fabric thickness and deposited strand height significantly affect 3D printing on textile fabric.Originality/valueThis study investigates the potential of 3D printing on textiles by changing the printing speed, nozzle hot end, Z distance and layer thickness. It presents two critical case studies of 3D printing soft thermoplastic polyurethane material on a cotton T-shirt and on a tulle textile to reveal the 3D printing on textile fabrics manufacturing challenges.

Efficacy of silver-impregnated fabric in preventing spread of infection in the wrestling environment.

The best practice for cleaning wrestling mats is using a residual disinfectant with continued antibacterial action. Recently available wash-in silver additives claim to confer a residual effect to fabric. To test the efficacy of laundering with a wash-in silver additive in reducing exposure of athletes to potentially infectious microbes on apparel. 4-part Controlled Laboratory Study/Parallel Group Comparison Study: (1) To test whether fabrics in athletic clothing would be affected differently, we applied bacteria to control fabrics washed in detergent alone and test counterparts washed in detergent plus wash-in silver additive. Bacteria were applied to fabrics, extracted, plated, incubated, and counted. (2) To see if wash-in silver affected various bacteria differently, we washed cotton t-shirts with detergent alone or with detergent plus wash-in silver. We applied four bacterial species commonly found in the wrestling environment. Bacteria were extracted, plated, incubated, and counted. (3) To see if wash-in silver was effective in reducing bacterial contamination during practice, 32 collegiate wrestlers paired off with one wearing a test silver-treated t-shirt, and their partner wearing a control shirt. Wrestler rotations exposed shirts to 2, 4 or 8 wrestlers. Identical swatches of fabric were cut from the t-shirts. Bacteria were extracted, plated, incubated, and counted. (4) We simulated prolonged/repeated bacterial exposure as occurs during tournaments by applying bacteria directly to silver-treated and untreated singlet material repeatedly over time. Test samples were taken at regular intervals to see if bacterial growth was inhibited by the presence of the silver nanoparticles. Bacteria were extracted, plated, incubated, and counted. Laboratory and practice. Collegiate D3 Wrestling Team. Wash-in silver would be considered effective if statistically significant reduction in bacterial count was observed at 95% confidence. Wash-in silver reduced bacterial growth at low levels of contamination but did not significantly reduce bacterial growth at levels seen during contact sport competitions. This was true for all bacterial species and all fabrics tested. The environmental and potential health risks in using a wash-in silver nanoparticle laundry additive in the wash cycle for clothing worn by wrestlers outweigh any potential infection control benefits to these athletes. We do not currently recommend adopting wash-in silver treatment as part of the laundering regimen for wrestling programs until further testing of alternate methods of silver impregnation into sports fabrics has been investigated.

Sweat permeable and ultrahigh strength 3D PVDF piezoelectric nanoyarn fabric strain sensor

Commercial wearable piezoelectric sensors possess excellent anti-interference stability due to their electronic packaging. However, this packaging renders them barely breathable and compromises human comfort. To address this issue, we develop a PVDF piezoelectric nanoyarns with an ultrahigh strength of 313.3 MPa, weaving them with different yarns to form three-dimensional piezoelectric fabric (3DPF) sensor using the advanced 3D textile technology. The tensile strength (46.0 MPa) of 3DPF exhibits the highest among the reported flexible piezoelectric sensors. The 3DPF features anti-gravity unidirectional liquid transport that allows sweat to move from the inner layer near to the skin to the outer layer in 4 s, resulting in a comfortable and dry environment for the user. It should be noted that sweating does not weaken the piezoelectric properties of 3DPF, but rather enhances. Additionally, the durability and comfortability of 3DPF are similar to those of the commercial cotton T-shirts. This work provides a strategy for developing comfortable flexible wearable electronic devices.

Evaluation of disposable protective garments against epoxy resin permeation and penetration from anti-corrosion coatings.

Epoxy-based resin formulations are a frequent cause of allergic and irritant contact dermatitis in the construction and painting industries. Cases of epoxy resin contact dermatitis continue to persist across many sectors and are likely attributable to the growing use of epoxy products, including epoxy-based anti-corrosion coatings and inadequate skin protection. There are no published performance data against epoxy resins for garment materials and gloves to guide proper material selection in the workplace. The objective of this study was to evaluate the resistance of 5 protective garment materials against permeation and penetration by bisphenol A diglycidyl ether and its higher oligomers found commonly in epoxy-based anti-corrosion coatings. Five disposable garment materials were evaluated for resistance to bisphenol A diglycidyl ether monomers and oligomers during contact with epoxy-based anti-corrosion coatings, including latex gloves, nitrile gloves, Tyvek coveralls, polypropylene/polyethylene (PP/PE) coveralls, and a cotton T-shirt. A permeation test cell system was used to evaluate each garment material against an epoxy-based zinc-rich primer and an epoxy-based intermediate coating using a realistic application method. Glass fiber filters were used to collect permeating and penetrating epoxy resin during a 120-min test period. Bisphenol A diglycidyl ether quantification was performed with high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry. Paint loading, coating thickness, and homogeneity were assessed on polytetrafluoroethylene filters sprayed in series in permeation test cells. Latex gloves provided the least resistance to permeation by BADGE in coating formulations, with a maximum cumulative permeation over the 2-h test interval of 21.7 ng cm-2 with the primer and 513.8 ng cm-2 with the intermediate coating product. Nitrile gloves were not permeated by either coating formulation. The Tyvek coveralls provided greater protection as compared to the PP/PE coveralls. The cotton T-shirt was penetrated by bisphenol A diglycidyl ether more frequently than any of the tested garment materials and resulted in a maximum cumulative penetration of 128 ng cm-2 with the primer and 28.0 ng cm-2 with the intermediate coating. Although all the garment materials evaluated during this study provided sufficient protection to prevent cumulative permeation in excess of the established acceptable permeation thresholds, the use of nitrile gloves and Tyvek coverall is highly recommended to minimize skin exposure to bisphenol A diglycidyl ether. We recommend cotton T-shirts to be used under Tyvek coveralls as a secondary layer of skin protection and for added comfort, but not as a primary protection layer.

Impact of additional carbon storage of natural plant fiber on product carbon footprint: A case study of cotton/kapok blended T-shirt VS pure cotton T-shirt

Researchers have drawn their attention to natural plant fibers in recent years owing to the significant energy consumption and detrimental environmental impact of textile and apparel industry and the imperative of environmental protection. While the potential for mitigating carbon emissions of apparel products deriving from woody versus herbaceous fiber crops remains unclear. Moreover, extant studies only take limited processes as a case demonstration, rather than exploring the impact of additional carbon storage throughout the whole life cycle. Therefore, this study extended the system boundary to the whole life cycle of products from the raw material extraction to the end-of-life disposal stage, conducted a whole life cycle carbon footprint (CF) analysis of cotton/kapok blended T-shirts and pure cotton T-shirts at each stage of their life cycle based on carbon storage accounting method. The results revealed that the CF of 1 kg pure cotton T-shirt is 9.469 kg CO2eq, while for 1 kg cotton/kapok blended T-shirt, it's −24.249 kg CO2eq. Correspondingly, the carbon storages of these T-shirts are −15.653 kg CO2eq and −43.442 kg CO2eq, respectively. This proved that long-term additional carbon storage may possess relatively higher carbon storage due to woody crops' multi-annuality compared with herbaceous crops. When considering carbon emissions during industrial manufacturing and consumer use stages, it's recommended to opt for heavier T-shirts when fabric thickness between pure cotton and cotton/kapok blended T-shirts are comparable, as this choice may align better with environmental considerations, and adopting appropriate washing and caring practices such as choosing lighter-weight garments, utilizing appropriate washing program and detergent dose, opting for air-drying and avoiding ironing when caring for clothing are also advised. The study results affirmed the feasibility of achieving carbon neutrality in apparel products and could provide methodological guidance for future assessment for future research.

Physiological effects of exercise in heat while wearing a polyester versus cotton T-shirt in physically active men with obesity: a pilot study.

Obesity may impair evaporation especially during exercising in heat. Polyester sportwear is proposed to improve the evaporation but its effectiveness remains overlooked. We investigated physiological effects of exercise in heat while wearing a polyester versus cotton T-shirt on thermoregulation, perspiration, and cardiovascular regulations. Physically active men with obesity (N.=7; 21.7±1.7 years old; VO<inf>2peak</inf> 36.8±8.7 mL/kg/min; body fat percentage 34.7±4.3%) performed two randomized, crossover walking sessions for 30 mins (27 °C; 12% relative humidity) while wearing a polyester or cotton T-shirt, separated by a 7-day wash out period. Thermoregulation was assessed by measuring tympanic, torso (back and chest), and peripheral (forehead and forearm) skin temperatures. Perspiration rate was estimated as the difference in body weight (pre minus post walking). Heart rate was measured by a Polar heart rate monitor. Systolic and diastolic blood pressure were measured by a sphygmomanometer. All measurements were performed pre, during, and post each session. Two-way ANOVA examined main effects of time, fabric type, and their interactions on the study's outcomes. Back and chest temperatures increased (∆=1.6 °C and 0.9 °C, respectively) while forehead and forearm temperatures decreased (∆=-0.5 °C and -1.6 °C, respectively) over time (P<0.05 for all). Only forehead temperature had an interaction effect for time by fabric type where greater decrease was observed during the polyester T-shirt session compared to the cotton T-shirt session (∆=-0.1 vs. -0.8 °C; P=0.016). Heart rate (∆=27.8 beat/min) and systolic blood pressure (∆=7.5 mmHg) increased while diastolic blood pressure (∆=-5.0 mmHg) decreased over time (P<0.05 for all). No difference observed for perspiratory rate (P>0.05). The current findings do not support the superiority of polyester or cotton sportwear for better thermoregulatory, perspiratory, and cardiovascular regulations in physically active men with obesity. Future research should examine the effectiveness of other alternative fabrics of sportwear for better physiological responses when exercising in the heat, particularly in adults with obesity.

PENERAPAN METODE KANSEI ENGINEERING DAN QUALITY FUNCTION DEPLOYMENT (QFD) DALAM PENGEMBANGAN KUALITAS PRODUK PIAMA

This research was conducted in a micro, small and medium enterprise (MSME) which produces apparel with its own brand. Even though they have been producing clothes since October 2020, sales have not met the target so the owner decided to temporarily stop the business with plans to continue after having sufficient capital. This study aims to determine consumer expectations for pajama products, measure the gap between expectations and products, and provide a design for the development of product quality using the Kansei Engineering and Quality Function Deployment (QFD). By processing the results of the first questionnaire and grouping the attributes into the eight dimensions of product quality, the eight most important attributes were comfort, pockets on shirt, safe, durable, smooth, easy to buy, affordable, and minimalist. The second questionnaire asked respondents to express their level of expectations and perceptions of the main product, competitor 1 and 2, which were then used to conduct a gap analysis. The gap value showed that consumer satisfaction with the main pajama product is lower than competitor 1, but higher than competitor 2, where the main product has an advantage in the 'affordable price' attribute. Furthermore, the three phases of the House of Quality (HOQ) provided manufacturing planning results in the form of using materials without defects, cotton and cotton t-shirt materials, plain or minimalist motifs, short sleeve and short pants model, variations in sizes M, L, and XL for all models, and the provision of pockets in shirts and pajama pants.

Effect of sportswear on performance and physiological heat strain during prolonged running in moderately hot conditions.

This study examined the impact of different upper-torso sportswear technologies on the performance and physiological heat strain of well-trained and national-level athletes during prolonged running in moderately hot conditions. A randomized crossover design was employed in which 20 well-trained (n = 16) and national-level (n = 4) athletes completed four experimental trials in moderately hot conditions (35°C, 30% relative humidity). In each trial, participants ran at 70% of their peak oxygen uptake (70% V̇O2peak ) for 60 min, while wearing a different upper-body garment: cotton t-shirt, t-shirt with sweat-wicking fabric, compression t-shirt, and t-shirt with aluminum dots lining the inside of the upper back of the garment. Running speed was adjusted to elicit the predetermined oxygen consumption associated with 70% V̇O2peak . Physiological (core and skin temperatures, total body water loss, and urine specific gravity) and perceptual (thermal comfort and sensation, ratings of perceived exertion, and garment cooling functionality) parameters along with running speed at 70% V̇O2peak were continuously recorded. No significant differences were observed between the four garments for running speed at 70% V̇O2peak , physiological heat strain, and perceptual responses (all p > 0.05). The tested athletes reported larger areas of perceived suboptimal cooling functionality in the cotton t-shirt and the t-shirt with aluminum dots relative to the sweat-wicking and compression t-shirts (d: 0.43-0.52). There were not differences among the tested garments regarding running speed at 70% V̇O2peak , physiological heat strain, and perceptual responses in well-trained and national-level endurance athletes exercising in moderate heat.

Influence of Undergarments on the Comfort Level of Scoliosis Brace Wearers.

Bracing has proven to be an effective method for the conventional treatment of scoliosis in young people. A brace, a therapeutic device, covers the upper body and promotes healing by applying pressure to specific areas. However, wearing a scoliosis brace negatively affects the user's thermo-physiological well-being and often leads to discomfort. In this study, we investigated the influence of T-shirts as an undergarment on the thermo-physiological well-being of the brace wearer. For this purpose, we performed a comparative analysis of six T-shirts made from different special knitted fabrics. We carried out wearing tests in a computer-controlled climate chamber according to a predetermined protocol. The test subject wore the orthopedic brace over the different T-shirts at three different temperatures. The results indicate that the knitted fabrics of undergarments and environmental conditions considerably impact the wearer's thermo-physiological comfort. In the tests, the T-shirts made from the selected functional fabrics performed very well. The T-shirt made from the classic cotton fabric containing elastane yarn also performed well and was the most environmentally friendly. Currently, due to its lower price and easier availability, this cotton T-shirt can be recommended for wearing under a scoliosis brace.

The impact of substrate dampness on the transfer of glass fragments to upper garments when breaking windows

Glass fragments are often recovered from garments worn by the authors of certain types of crimes and are useful as they present strong connections to the scene at both the source and activity level. It is known that the transfer of glass fragments is impacted when recipient garments are dampened, such as by rain, however, the details of the effect are not clear. This research aimed to determine the impact of substrate dampness on glass retention. Across the three test garments, a cotton t-shirt was found to increase in retentiveness with increasing dampness, while a wool/polyester blend jumper and a cotton hoodie were both found to increase only to a point, before decreasing again when the garment was saturated. This is attributed to the construction of the fabrics, as it does not appear to be related to the identity of the textile itself. It was also found that the size distribution of fragments changed with dampness. All the garments retained a smaller proportion of fragments less than 0.5 mm in size when saturated or dampened than when dry, along with an increase in the proportion of fragments in the 1–1.5 mm and greater than 1.5 mm size categories. These results indicate that is important to consider the impact of substrate dampening when relevant, and that this consideration must be done holistically as different substrates respond to dampening in different ways. It also indicates that consideration of the size distribution in fragment populations may reveal additional information in complex scenarios.

Becoming Naturecultural: Rethinking sustainability for a more-than-human world

The Earth is facing extraordinary ecological crises resulting from human impact on the planet. Meanwhile, a growing body of research studies the relationship of organizations with the natural environment but often overlooks anthropocentrism: the premise of human superiority over nature. Unfortunately, this human exceptionalist premise is the crux of the ecological crisis that cannot be overlooked any longer. To address this discrepancy in the literature, we claim that an ontological shift is necessary. Drawing from feminist new materialisms and Deleuzian relational ontologies, we develop becoming naturecultural, a material–discursive assembling process of more-than-human and more-than-capitalist entanglements. To illustrate the analytical value of becoming naturecultural, we engaged in empirical work at an organic cotton t-shirt supply chain, and conducted a multi-sited fieldwork with affective ethnographic methodologies. Working with the data collected, we narrated a human de-centered case study fostering critical but affirmative inquiries about sustainability from a non-anthropocentric relational ontology. At the end we discuss two implications for organizational sustainability research: thinking with and writing with becoming naturecultural. They facilitate moving beyond critiques of anthropocentrism and articulating affirmative possibilities for organization studies in and for the Anthropocene.

The transfer of fibres between garments in a choreographed assault scenario

Our fundamental understanding of fibre transfer remains based on early seminal transfer studies that were largely mechanical simulations. However, transfer events in the real world are uncontrolled in nature. This study takes a novel approach to address this discrepancy, with skilled jiu-jitsu practitioners performing a choreographed ‘standard’ assault scenario to investigate the transfer of fibres between a cotton T-shirt and cotton/polyester hoody. Garments were collected immediately after the scenario and examined for the number, length and zonal distribution of transferred fibres. It was observed that cotton transferred the most fibres, on average twice as many from blended hoodies than T-shirts; whilst polyester transferred the least. Shorter fibres transferred and were recovered more readily than longer fibres; however, it was more likely to recover polyester fibres> 5 mm. The number and length of fibres transferred from the attacker’s garment mainly depended on the construction of the donor textile (including sheddability) and properties of the fibres. Conversely, properties of the recipient textile were more significant factors when considering transfer from the victim’s garment. Location of recovered fibres was found to be dependent on the wearer’s role, but generally, upper zones and sleeves of both garments were most populated. Overall, these results will contribute to grow our current knowledge base regarding fibre transfer between donor and recipient textiles in a common assault situation. This will ultimately aid experts support evaluation with regards to competing hypotheses such as in a Bayesian framework.

Solar Thermal Textiles for On-Body Radiative Energy Collection Inspired by Polar Animals.

Humans use textiles to maintain thermal homeostasis amidst environmental extremes but known textiles have limited thermal windows. There is evidence that polar-dwelling animals have evolved a different mechanism of thermoregulation by using optical polymer materials to achieve an on-body "greenhouse" effect. Here, we design a bilayer textile to mimic these adaptations. Two ultralightweight fabrics with complementary optical functions, a polypropylene visible-transparent insulator and a nylon visible-absorber-infrared-reflector coated with a conjugated polymer, perform the same putative function as polar bear hair and skin, respectively. While retaining familiar textile qualities, these layers suppress dissipation of body heat and maximize radiative absorption of visible light. Under moderate illumination of 130 W/m2, the textile achieves a heating effect of +10 °C relative to a typical cotton T-shirt which is 30% heavier. Current approaches to personal radiative heating are limited to absorber/reflector layer optimization alone and fail to reproduce the thermoregulation afforded by the absorber-transmitter structure of polar animal pelts. With increasing pressures to adapt to a rapidly changing climate, our work leverages optical polymers to bridge this gap and evolve the basic function of textiles.

Measurement of the Diffusion and Partition Coefficients of 6-Methyl-5-hepten-2-one in Clothing

Deep understanding of the chemical reaction and physical transport characteristics of 6-methyl-5-hepten-2-one (6-MHO) in different phases (e.g., skin, clothing) is important for modeling the indoor squalene/ozone reaction. In this study, we make the first attempt to accurately measure the physical transport parameters, i.e., the diffusion coefficient (Dm) and partition coefficient (K) of 6-MHO in different clothing (jeans, nylon, pure cotton T-shirt). A ventilated–airtight–ventilated testing procedure was designed, and relevant experiments were performed in 30 L small-scale chambers. The key parameters of 6-MHO (Dm and K) are determined by nonlinearly fitting the measured gas-phase concentration data with physical model using a hybrid optimization method. The high fitting accuracy (R2 > 0.93), good replication (relative deviations of determined Dm and K less than 16% for duplicated experiments), and further sensitivity analysis demonstrate the reliability and robustness of the method. In addition, the variation of the key parameters of 6-MHO in the pure cotton T-shirt with temperature (in the range of 20–37 °C) is investigated. Results indicate that Dm increases while K decreases with increasing temperature. This study provides some of the fundamental data for characterizing the squalene/ozone reaction and should be helpful for the subsequent dermal exposure in realistic indoor environments.

A Spatial Water Footprint Assessment of Recycled Cotton T-Shirts: Case of Local Impacts in Selected China Provinces

In global trade, the manufacture and consumption of cotton textile products are intervening in the hydrological cycle. To address the relationship between the product system and the unsustainable use of local water resources, a spatial water footprint assessment is needed. This study presents a spatial water footprint method that was demonstrated in the case of domestically produced cotton T-shirts in three recycle scenarios. The results showed that the water scarcity footprint of conventional T-shirt, eco T-shirt, recycled T-shirt is 2.45 H2O eq, 1.74 H2O eq, 8 × 10−2 H2O eq, respectively, and the water-eutrophication footprint of conventional T-shirt, eco T-shirt, recycled T-shirt is 1.18 × 10−2 PDF·m2·yr−1, 9.47 × 10−3 PDF·m2·yr−1, 4.04 × 10−3 PDF·m2·yr−1, respectively. Two interesting results have been found. Firstly, the hydrosphere has been affected by manufacture and consumption; thus any choice made by manufacturers and consumers may lead to an impact on the water resource in a region that is far from the location. Secondly, the effect of water footprint reduction will be more apparent in places with severe water stress. The spatial water footprint offers a transparent result of each phase’s potential contribution to the local environment and could make a quantitative comparison between product stages, products, and local impacts. Thus, spatial water footprint will be a critical component in the sustainability management improvement of the supply chain.

Survival of Xanthomonas fragariae on Common Materials.

Xanthomonas fragariae causes strawberry angular leaf spot (ALS), an important disease for the strawberry nursery industry in North America. To identify potential inoculum sources, the survival of X. fragariae was examined on the surfaces of 11 common materials found in nurseries: corrugated cardboard, cotton balls, cotton cloth (t-shirt), strawberry leaf, sheet metal, plastic, rubber, Tyvek, wood (balsa), glass (microscope slide), and latex (latex glove). Prefabricated rectangular samples (7.62 by 2.54 cm) of each material were immersed in a bacterial suspension for 15 min, after which the samples were stored at approximately 20°C (room temperature) or -4°C (the cold storage temperature for dormant plants in strawberry nurseries) for 1, 3, 7, 14, 30, 60, 90, 180, 270, and 365 days after inoculation (DAI). After the storage period elapsed, bacteria were recovered from the surfaces of each of the samples with phosphate-buffered saline (PBS)-soaked cotton balls. Survival rate was determined with a viability real-time quantitative PCR procedure and in a plant bioassay that involved rub inoculation of strawberry leaflets with the PBS-soaked cotton balls used to recover bacteria from the samples. Results showed that X. fragariae could survive on all surfaces but that survival rate differed among materials and storage temperature. All materials were capable of harboring viable bacteria up to 7 DAI when stored at -4°C based on the formation of lesions on inoculated leaves in the plant bioassay. The longest survival observed was 270 DAI on cardboard stored at -4°C. At room temperature, cardboard, cotton balls, cotton t-shirt, and strawberry leaf tissue supported small bacterial populations up to 14 DAI. The information from this study can be used to improve sanitation practices for ALS management in strawberry nurseries.

Comparison of homemade mask designs based on calculated infection risk, using actual COVID-19 infection scenarios.

During pandemics such as COVID-19, shortages of approved respirators necessitate the use of alternative masks, including homemade designs. The effectiveness of the masks is often quantified in terms of the ability to filter particles. However, to formulate public policy the efficacy of the mask in reducing the risk of infection for a given population is considerably more useful than its filtration efficiency (FE). The effect of the mask on the infection profile is complicated to estimate as it depends strongly upon the behavior of the affected population. A recently introduced tool known as the dynamic-spread model is well suited for performing population-specific risk assessment. The dynamic-spread model was used to simulate the performance of a variety of mask designs (all used for source control only) in different COVID-19 scenarios. The efficacy of different masks was found to be highly scenario dependent. Switching from a cotton T-shirt of 8% FE to a 3-layer cotton-gauze-cotton mask of 44% FE resulted in a decrease in number of new infections of about 30% in the New York State scenario and 60% in the Harris County, Texas scenario. The results are valuable to policy makers for quantifying the impact upon the infection rate for different intervention strategies, e.g., investing resources to provide the community with higher-filtration masks.

Carbon footprint of t-shirts made of cotton, polyester or viscose

Carbon footprint (CFP) is an effective tool for calculating and assessing greenhouse gas (GHG) emissions and removals in a product life cycle using a single impact category of climate change. This study performed the CFP calculation and assessment for cotton t-shirt, polyester t-shirt and viscose t-shirt, complying with the system boundary from raw material extraction phase to end-of-life. Results demonstrated that yarn manufacturing contributes most of the CFP (36.1%-50.5%), followed by the product use phase (30.6%-48.3%) and fabric manufacture phase (19.6%-20.3%). Energy consumption is the main contributor to CFP in production processes. Additionally, the carbon sequestration effect of plant-derived fibres such as cotton and viscose played an important role to offset GHG emissions in the life cycle of t-shirts. The effect of carbon sequestration is more significant with the increase of product service life. Findings of this study can provide carbon emission reduction references for enterprises and consumers. In order to reduce the CFP in the entire life cycle of t-shirts, it was recommended that enterprises need to innovate production technology and increase the proportion of renewables in energy structures to replace the use of fossil energy, and consumers prolong the life cycle of products.

Immersive ultraviolet disinfection of E. coli and MS2 phage on woven cotton textiles

Immersive ultraviolet disinfection provides a chemical-free technology for safer textiles, surfaces, and public spaces by inactivating communicable pathogens. This study examined immersive UV disinfection, using a disinfection cabinet, of E. coli and MS2 that was inoculated on white cotton T-shirts. The impact that porous materials have on UV disinfection is poorly understood with the majority of previous surface disinfection research focusing on hard, smooth surfaces. Several approaches were used in this study to characterize the light dynamics within the disinfection cabinet including colorimetric dosimetry coupons, biodosimetry, and spectroradiometry. Micro and macro geometry of porous surfaces are important factors to consider when using immersive UV technologies. The geometry of the cabinet impacted the distribution of emitted UV light within the disinfection cabinet and the physical properties of a porous material, such as the woven pattern of cotton, both contribute to UV disinfection efficiency. This work identified that light distribution is crucial for immersive UV technologies as the delivered fluence was highly variable within the disinfection cabinet and resulted in a difference of several logs of reduction for adjacent areas of T-shirt samples. Other inoculated areas achieved upwards of 1-log reductions values for MS2 and upwards of 2-log reductions for E. coli.

In Vitro and In Vivo Human Body Odor Analysis Method Using GO:PANI/ZNRs/ZIF−8 Adsorbent Followed by GC/MS

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis.