Corvis ST Tonometer Research Articles

Diagnosis of Forme Fruste Keratoconus Using Corvis ST Sequences with Digital Image Correlation and Machine Learning.

This study aimed to employ the incremental digital image correlation (DIC) method to obtain displacement and strain field data of the cornea from Corvis ST (CVS) sequences and access the performance of embedding these biomechanical data with machine learning models to distinguish forme fruste keratoconus (FFKC) from normal corneas. 100 subjects were categorized into normal (N = 50) and FFKC (N = 50) groups. Image sequences depicting the horizontal cross-section of the human cornea under air puff were captured using the Corvis ST tonometer. The high-speed evolution of full-field corneal displacement, strain, velocity, and strain rate was reconstructed utilizing the incremental DIC approach. Maximum (max-) and average (ave-) values of full-field displacement V, shear strain γxy, velocity VR, and shear strain rate γxyR were determined over time, generating eight evolution curves denoting max-V, max-γxy, max-VR, max-γxyR, ave-V, ave-γxy, ave-VR, and ave-γxyR, respectively. These evolution data were inputted into two machine learning (ML) models, specifically Naïve Bayes (NB) and Random Forest (RF) models, which were subsequently employed to construct a voting classifier. The performance of the models in diagnosing FFKC from normal corneas was compared to existing CVS parameters. The Normal group and the FFKC group each included 50 eyes. The FFKC group did not differ from healthy controls for age (p = 0.26) and gender (p = 0.36) at baseline, but they had significantly lower bIOP (p < 0.001) and thinner central cornea thickness (CCT) (p < 0.001). The results demonstrated that the proposed voting ensemble model yielded the highest performance with an AUC of 1.00, followed by the RF model with an AUC of 0.99. Radius and A2 Time emerged as the best-performing CVS parameters with AUC values of 0.948 and 0.938, respectively. Nonetheless, no existing Corvis ST parameters outperformed the ML models. A progressive enhancement in performance of the ML models was observed with incremental time points during the corneal deformation. This study represents the first instance where displacement and strain data following incremental DIC analysis of Corvis ST images were integrated with machine learning models to effectively differentiate FFKC corneas from normal ones, achieving superior accuracy compared to existing CVS parameters. Considering biomechanical responses of the inner cornea and their temporal pattern changes may significantly improve the early detection of keratoconus.

Comparative analysis of Maklakov and automated ocular tonometry methods of intraocular pressure measurement

PURPOSE. To study the factors affecting the results of intraocular pressure (IOP) measurement by different ocular tonometry methods.MATERIAL AND METHODS. The study involved 72 patients (128 eyes) aged 22 to 86 years. IOP was measured in all patients using Corvis ST tonometer, Topcon ST-800 pneumotonometer, iCare IC 100 portable tonometer, and Maklakov applanation tonometer. The results of IOP measurements were analyzed depending on the following factors: age, gender, presence of glaucoma or suspicion for glaucoma, presence of refractive errors, axial length of the eye, thickness of the cornea.RESULTS. The greatest difference in IOP values was observed between the Maklakov method (tonometric IOP) and iCare IC 100 device (true IOP). In some cases (9–22%), tonometric IOP obtained using the Maklakov method was equal or lower than the values obtained with other methods.Results of the correlation analysis confirmed the high correlation of the IOP values obtained with Topcon CT-800, iCare IC 100 and Corvis. On the other hand, IOP values obtained with the Maklakov method had lower correlation dependence with IOP values obtained using other tono metry methods. The strongest correlation of IOP and corneal thickness was observed when using Topcon CT-800. The IOP value obtained with the Maklakov method had the lowest correlation dependence with corneal thickness.CONCLUSION. The lowest correlation dependence of Mak lakov IOP measurements with IOP values obtained using Topcon CT-800, iCare IC 100 and Corvis indicates that the reliability of the Maklakov method significantly depends on the compliance with the examination technique.

Assessing biomechanical corrections: A comparison between Corvis ST and ICare tonometer for intraocular pressure measurement

This study aims to compare the accuracy of IOP measurements in pediatric patients using two different tonometers: ICare PRO and Corvis ST (CST). However, the choice of tonometers may vary between screening centers, depending on patient suitability. To address this, we enrolled 30 patients with retinopathy of prematurity over a period of 33 days for experimentation. A head-to-head comparison revealed a strong correlation between the Corvis ST (CST) and ICare PRO tonometers (r = 0.867). Furthermore, no significant difference was observed in IOP values obtained with the Corvis ST (CST) and ICare PRO tonometers (P > 0.05). However, it is worth noting that the Corvis ST (CST) measurements were significantly higher than those obtained from the ICare PRO tonometers (P < 0.05). In conclusion, this study demonstrates that the Corvis ST (CST) tonometer exhibits a high correlation coefficient comparable to that of the ICare PRO tonometer, making it a reliable tool for assessing IOP in pediatric patients. These findings are crucial for enhancing our understanding of the physiological function of melatonin in the eye and its potential to target melatonin receptors and their complexes for addressing various eye pathologies.

Corneal Morphological and Biomechanical Changes in Thyroid-Associated Ophthalmopathy.

This study aimed to evaluate corneal morphological and biomechanical changes in patients with thyroid-associated ophthalmopathy (TAO) and their correlations with activity and severity. Patients diagnosed with TAO were recruited and divided into groups by activity and severity. All subjects underwent a complete ophthalmic examination, including magnetic resonance imaging. Corneal topography was measured using a Pentacam device, and biomechanical parameters were obtained using a CorVis ST tonometer. Correlations among the corneal parameters, clinical activity score, and NOSPECS score were analyzed. Areas under the receiver operating characteristic curves were calculated to evaluate the diagnostic accuracy of corneal changes for active and severe TAO. Fifty-three eyes with TAO and 16 healthy eyes were enrolled in our study. The back elevation, CorVis biomechanical index, tomographic and biomechanical index, stiffness parameter at the first applanation, deviation from normality in back elevation, relational thickness, and overall deviation from normality were significantly increased in patients with TAO (all P <0.05), whereas the smallest corneal thickness, maximum Ambrósio relational thickness, and deformation amplitude (DA) ratio were significantly decreased (all P <0.05). The clinical activity score was strongly positively correlated with back elevation (γ = 0.515, P <0.001). The NOSPECS score was strongly positively correlated with relational thickness and tomographic and biomechanical index (γ = 0.429 and 0.515, P <0.001) and negatively correlated with maximum Ambrósio relational thickness (γ = -0.53, P <0.001). Moreover, maximum Ambrósio relational thickness and the Ambrósio relational thickness through the horizontal meridian showed desirable diagnostic capacity in distinguishing mild TAO from moderate-severe TAO (areas under the receiver operating characteristic curve, 0.799 and 0.769). Corneal morphological and biomechanical changes were found in patients with TAO, which might be related to the presence of inflammation. Measurements of corneal morphological and biomechanical parameters could serve as references in evaluating TAO.

In-vivo high-speed biomechanical imaging of the cornea using Corvis ST and digital image correlation

In-vivo corneal biomechanical characterization has gained significant clinical relevance in ophthalmology, especially in the early diagnosis of eye disorders and diseases (e.g. keratoconus). In clinical medicine, the air-puff-based tonometers such as Ocular Response Analyzer (ORA) and Corvis ST have been used in the in-vivo biomechanical testing. In the test, the high-speed dynamic deformation of the cornea under air-puff excitation is analyzed to identify the abnormities in the morphological and biomechanical properties of the cornea. While most existing measurements reflect the overall corneal biomechanical properties, in-vivo high-speed strain and strain rate fields at the tissue level have not been assessed. In this study, 20 subjects were classified into two different groups: the normal (NORM, N = 10) group and the keratoconus (KC, N = 10) group. Image sequences of the horizontal cross-section of the human cornea under air puff were captured by the Corvis ST tonometer. The macroscale mechanical response of the cornea was determined through image analysis. The high-speed evolution of full-field corneal displacement, strain, velocity, and strain rate was reconstructed using the incremental digital image correlation (DIC) approach. Differences in the parameters between the NORM and KC groups were statistically analyzed and compared. Statistical results indicated that compared with the NORM group, the KC corneas absorbed more energy (KC: 8.98 ± 2.76 mN mm; NORM: 4.79 ± 0.62 mN mm; p-value <0.001) with smaller tangent stiffness (KC: 22.49 ± 2.62 mN/mm; NORM: 24.52 ± 3.20 mN/mm; p-value = 0.15) and larger maximum deflection (KC: 0.99 ± 0.07 mN/mm; NORM: 0.92 ± 0.06 mN/mm; p-value <0.05) on the macro scale. Further, we also observed that The maximum displacement (KC: 1.17 ± 0.06 mm; NORM: 1.06 ± 0.07 mm; p-value <0.005), velocity (KC: 236 ± 29 mm/s; NORM: 203 ± 17 mm/s; p-value <0.01), shear strain (KC: 24.43 ± 2.59%; NORM: 20.26 ± 1.54%; p-value <0.001), and shear strain rate (KC: 69.74 ± 11.99 s−1; NORM: 54.84 ± 3.03 s−1; p-value <0.005) in the KC group significantly increased at the tissue level. This is the first time that the incremental DIC method was applied to the in-vivo high-speed corneal deformation measurement in combination with the Corvis ST tonometer. Through the image registration using incremental DIC analysis, spatiotemporal dynamic strain/strain rate maps of the cornea can be estimated at the tissue level. This is constructive for the clinical recognition and diagnosis of keratoconus at a more underlying level.

Innovative approaches to measuring intraocular pressure

AbstractAlthough different factors have been implicated in the development and progression of glaucoma, intraocular pressure (IOP) remains the main modifiable risk factor. Goldmann applanation tonometer (GAT) considers the “gold standard” for measuring IOP. The main deficiency of GAT, however, is the static nature of its measurements and that it is dependent on corneal biomechanics, central corneal thickness as well as scleral stiffness. The single measurement of IOP for the management of glaucoma provides limited information since it does not take into account the natural fluctuation of IOP, individual ranges, IOP peaks or variations throughout the day. Although the role of IOP fluctuations in glaucoma progression is not clearly defined, there is consensus on the importance of understanding the circadian profiles of IOP in glaucoma patients. Given the limitations of GAT for the actual measurement of IOP, different tonometers have been designed with the aim of advancing in self‐tonometry as Icare HOME, or obtaining independent measurements of corneal biomechanics, as Ocular Response Analyser (ORA), Pascal dynamic contour tonometer or the Corvis ST tonometer. Research to monitor IOP is based on three different strategies: (1) self‐tonometry; (2) permanent monitoring of the IOP; and (3) the temporary monitoring of the IOP. Currently, the sensors in contact lenses allow the IOP profiles to be recorded semi‐continuously for 24 hours with a minimally invasive technique, independent of the patient's position and the activity performed, opening new perspectives in the knowledge and management of glaucoma.

Comparison of Three Tonometers in Measuring Intraocular Pressure in Eyes That Underwent Myopic Laser in situ Keratomileusis and Photorefractive Keratectomy.

ObjectiveTo compare the intraocular pressure (IOP) obtained by Goldmann applanation tonometer (GAT), correcting applanation tonometer surface (CATS) and biomechanically corrected IOP (bIOP) of Corvis ST tonometer (CVS); and to determine the effects of manifest refraction spherical equivalent (MRSE), central corneal thickness (CCT) and mean corneal curvature (Km) on the IOP measurements of corneal refractive patients.MethodsThis was a single-center, retrospective, cross-sectional study of 120 eyes of 64 patients from May 1, 2020 to June 1, 2021 who underwent laser in situ keratomileusis (LASIK) or photorefractive keratectomy (PRK). The level of agreement between the three tonometers was evaluated, and correlation between parameters was calculated using Pearson correlation.ResultsMean preoperative to postoperative IOP in LASIK and PRK was 15.1 ± 3 to 11.3 ± 2.1 and 14.4 ± 2.6 to 12.1 ± 3 using GAT, 16.4 ± 2.8 to 13.1 ± 2.3 and 15.9 ± 2.6 to 13.7 ± 3 using CATS and 14.8 ± 2.4 to 12.9 ± 1.5 and 14.2 ± 2.4 to 12.6 ± 1.9 using CVS-bIOP. Preoperative IOP correlation between each tonometer pair showed that the lowest mean difference was between GAT and CVS-bIOP (0.32 in LASIK, 0.15 in PRK). Preoperative to postoperative IOP correlation of each tonometer resulted in a difference of 3.77, 2.30 in GAT; 3.32, 2.28 in CATS and 1.88, 1.62 in CVS-bIOP in the LASIK and PRK groups, respectively. Percentage change in CCT and Km was not correlated while change in MRSE had a weak relationship with percentage change in CVS-bIOP.ConclusionPreoperatively, GAT and CVS-bIOP had the best agreement in IOP measurements. CATS recorded the highest IOP preoperatively and postoperatively. IOP decreased in the three tonometers after LASIK and PRK with GAT having the largest decrease. CVS-bIOP had the lowest change between preoperative and postoperative IOP measurements. Only percentage change in MRSE was correlated with percentage change in CVS-bIOP in the LASIK group.

Evaluation of Corvis ST tonometer with the updated software in glaucoma practice.

To evaluate the agreement of biomechanically corrected intraocular pressure (b-IOP) and central corneal thickness (CCT) measurements obtained with the updated Corvis ST tonometer versus Goldmann applanation tonometry (GAT) and optical-based corneal pachymetry (OB-CCT) in controls, patients with ocular hypertension (OHT) and primary open angle glaucoma (POAG). Additionally, we examined the differences in corneal deformation parameters provided by the updated Corvis ST among the three groups. For each participant, GAT IOP, OB-CCT and measurements with a Corvis ST with updated software were obtained. Bland-Altman analysis was used to assess the agreement between the two measurement methods. A consecutive series of 80 eyes from 80 participants (30 with POAG, 25 with OHT and 25 normal controls) were included in this prospective study. The mean GAT IOP of all eyes was 17.2±3.6 mm Hg, and the mean b-IOP was 15.9±3.7 mm Hg (Spearman's rho=0.767, P<0.001). The 95% limits of agreement (LoAs) ranged from -3.1 mm Hg to 5.5 mm Hg for GAT IOP and b-IOP. b-IOP was not correlated with OB-CCT (Spearman's rho=-0.13 P=0.917). Meanwhile there was a weak positive corelation between OB-CCT and GAT IOP-b-IOP difference (Spearman's rho=0.378, P=0.001). The mean OB-CCT was 549.5±36.4 µm, and the Corvis-CCT was 556.1±41.5 µm (Spearman's rho=0.900, P<0.001). No statistically significant difference in the new indices provided by the updated Corvis ST was detected among the three groups. Compared with control eyes, POAG eyes had a significantly reduced applanation time 2 after adjusting for OB-CCT and GAT IOP (P=0.048). Corvis b-IOP and CCT correlate well with GAT IOP and OB-CCT. b-IOP is not affected by CCT, which might be an advantage, especially in thick or thin corneas. Corvis ST yields shorter applanation time 2 measurements in patients with POAG, which might reflect altered corneal viscoelasticity.

The alterations of corneal biomechanics in adult patients with corneal dystrophy.

To evaluate the changes of corneal biomechanics in granular, lattice and macular corneal dystrophy (GCD, LCD and MCD), and to assess the agreement of intraocular pressure (IOP) between Corvis ST tonometer (CST) and Goldmann applanation tonometer (GAT) and the agreement of central corneal thickness (CCT) between CST and ultrasound pachymeter (USP) in patients with corneal dystrophy. Fifty-nine eyes with corneal dystrophy (26 eyes with GCD, 18 eyes with LCD and 15 eyes with MCD) and 48 eyes from healthy subjects were included in this study. All subjects received ocular examination and anterior segment photography under slit-lamp microscope. Corneal biomechanical parameters were obtained using CST. IOP and CCT were obtained using GAT and USP, respectively. Mixed-effects models were fitted for group comparisons and Bland-Altman analyses were applied for assessing the agreement of IOP or CCT between devices. GCD, LCD and MCD showed higher First Applanation Deformation Amplitude (A1DA) and Corvis Biomechanical Index (CBI), and a lower Stiffness Parameter at First Applanation (SPA1), compared to controls. After CCT adjustment, MCD group showed a higher A1DA compared to GCD or LCD. The IOP measured by CST demonstrated an overestimated bias to the one obtained by GAT in all groups. The CCT measured by CST and USP showed good agreement in healthy eyes but not in those with corneal dystrophy. Corneal biomechanical alterations were observed in GCD, LCD and MCD. IOP and CCT measured by CST should be interpreted carefully in eyes with corneal dystrophy.

Novel Method of Measuring Corneal Viscoelasticity Using the Corvis ST Tonometer.

Background: The process of rapid propagation of the corneal deformation in air puff tonometer depends not only on intraocular pressure, but also on the biomechanical properties of the cornea and anterior eye. One of the biomechanical properties of the cornea is viscoelasticity, which is the most visible in its high-speed deformations. It seems reasonable to link the corneal viscoelasticity parameter to two moments of the highest speed of corneal deformations, when the cornea buckles. The aim of this work is to present a method of determining the time and place of occurrence of corneal buckling, examine spatial and temporal dependencies between two corneal applanations and bucklings in the Corvis ST tonometer, and correlate these dependencies with corneal viscoelastic properties. Methods: Images of the horizontal cross section of the Corvis ST deformed cornea from the air puff tonometer Corvis ST were used. 14 volunteers participated in the study, each of them had one eye measured eight times. Mutual changes in the profile slopes of the deformed corneas were numerically determined. They describe pure corneal deformation, eliminating the influence of rotation, and displacement of the entire eyeball. For each point in the central area of the corneal profile, the maximum velocities of mutual slope changes accompanying the applanations were estimated. The times of their occurrence were adopted as buckling times. Results: The propagation of buckling along the corneal profile is presented, as well as the repeatability and mutual correlations between the buckling parameters and intraocular pressure. Based on the relationship between them, a new parameter describing corneal hysteresis: Corvis Viscoelasticity (CVE) is introduced. It is characterized by high repeatability: ICC = 0.82 (0.69–0.93 CI) and low and insignificant correlation with intraocular pressure: r = 0.25 (p-value = 0.38). Conclusion: The results show for the first time how to measure the corneal buckling and viscoelastic effects with Corvis ST. CVE is a new proposed biomechanical parameter related to the viscoelastic properties of the cornea, which has high repeatability for the examined subject. The distribution of its values is planned to be tested on different groups of patients in order to investigate its clinical applicability.

Detection of Subclinical Corneal Ectasia after Laser in Situ Keratomileusis: Corvis ST

Described herein are the cases of 2 patients who underwent bilateral femtosecond-assisted laser in situ keratomileusis (FS LASIK) surgery and subsequently developed unilateral postLASIK ectasia. The fellow eye of both patients was topographically normal, their visual acuity was 20/20, and the patients had no visual symptoms. However, a biomechanical assessment using the Corvis ST tonometer (Oculus Optikgerate GmbH; Wetzlar, Germany) revealed remarkable weakness not only in the ectatic eyes, but also in the fellow eye. Arrangements were made to perform corneal crosslinking for the eyes with manifest ectasia and close follow-up of the fellow eyes.

Non-contact tonometry using Corvis ST: analysis of corneal vibrations and their relation with intraocular pressure.

The aim of this study was to determine characteristic frequencies of corneal vibrations occurring during air-puff intraocular pressure (IOP) measurement using the Corvis ST tonometer. Relations of frequency of the corneal vibrations with IOP were examined. Two selected vibration frequencies-frequency with maximum amplitude, and mass center of the frequency distribution area, for which the amplitude was higher than 50% (CM50)-present significant correlations with non-corrected IOP and biomechanical corrected IOP (bIOP). The highest correlation was found between the mean values of CM50 and bIOP (r=0.91). Based on the results obtained, it can be stated that the vibration frequencies of corneal peaks are closely related to the measured non-corrected and biomechanical corrected IOPs.

Changes in Corneal Biomechanics and Intraocular Pressure Following Cataract Surgery

To investigate the effects of cataract surgery on corneal biomechanics and intraocular pressure (IOP) measured with the updated Corvis ST tonometer (CST). Prospective, interventional case series study. This study included 39 eyes of 39 cataract patients. CST measurements were performed at presurgery (Pre) as well as 1week (1W), 1month (1M), and 3months (3M) postsurgery. The following CST parameters were recorded: deformation amplitude max (DA max), DA ratio max 1mm and 2mm, integrated radius, stiffness parameter at applanation 1 (SP A1), Ambrosio relational thickness to the horizontal profile (ARTh), Corvis biomechanical index (CBI), central corneal thickness (CCT), noncorrected intraocular pressure (IOPnct), and biomechanically corrected IOP (bIOP). IOP was also measured with Goldmann applanation tonometry and the noncontact tonometer CT-90A. All measurements were compared at each period using the linear mixed model, with and without adjustment for bIOP and CCT. All IOP measurements decreased over time (P < .01). CCT was increased at 1W and 3M (P < .01), whereas ARTh was decreased at 1W and 1M (P < .01), but returned to its Pre level at 3M. DA max and Integrated radius were increased at 3M (P < .01), whereas SP A1 was decreased at 3M (P < .01). CBI was increased at 1W (P < .01), but returned to its Pre level at 1M. IOP and Corneal biomechanical properties are changed after cataract surgery. In particular, SP A1 decreases while DA max and integrated radius increase, even at 3M, suggesting a less stiff cornea.

Numerical and clinical investigation on the material model of the cornea in Corvis tonometry tests: differentiation between hyperelasticity and viscoelasticity

Non-contact tonometers, including ORA and Corvis ST, are not only used to estimate intraocular pressure (IOP) in clinical surveys but are also utilized to evaluate biomechanical properties of the cornea or anterior eye. However, for the cornea a realistic material model is still a controversial issue, and the main goal of the present study is to make this clearer. To this aim, the corneal biomechanical response is modeled by using a four-element linear viscoelastic model, which is characterized by in-vivo clinical data from Corvis ST tonometer. IOP tonometry tests on 5 normal and 5 keratoconic cases are accomplished by Corvis ST tonometer. Images from cornea deformation due to applied air jet are acquired from Corvis ST and are converted to the corneal deformation profiles by image processing techniques. By excluding the eye globe rigid body motion (retraction) from the total eye displacement, pure deformation of the cornea is obtained and used to calculate the required material properties. By calculating retardation time, contribution of the material viscosity during the test is estimated. The results show that viscosity effects do not substantially contribute to the cornea response during dynamic tests for both normal and keratoconic corneas. Indeed, the viscous effect comes from the eye globe rigid body motion.

Assessment of corneal and fatty tissues biomechanical response in dynamic tonometry tests by using inverse models.

The assessment of corneal biomechanics is essential for studying ophthalmological operations, such as refractive surgeries, and for more accurate estimation of intraocular pressure. The chief aim of the current study is to characterize corneal and fatty tissues in order to construct a model to predict eye globe behavior during dynamic tonometry tests. In the present study, images from corneal deformation, acquired from Corvis ST tonometer, were processed. Then, corneal pure displacement and eye globe retraction were calculated. Utilizing inverse finite element method, corneal material properties were calculated in order to predict pure deformation obtained from Corvis ST. Using a similar approach, material parameters of fatty tissue were estimated in order to predict the eye globe retraction. The model used for fatty tissue was considered as corneal boundary condition in a forward finite element model to create a joint model, which could simulate corneal behavior in dynamic tonometry tests. It was shown that an isotropic material model is accurate enough to predict corneal deformation in dynamic tonometry tests. Moreover, effects of IOP on the estimated material properties were investigated. Finally, utilizing the joint model, it was demonstrated that there is strong correlation between corneal stiffness and the biomechanical parameter introduced by Corvis ST. An eye globe model was constructed and characterized by two distinct inverse models for corneal and fatty tissue. This model can be utilized for predicting eye globe behavior during dynamic tonometry tests besides other ophthalmological operations.

IOP measurement in silicone oil tamponade eyes by Corvis ST tonometer, Goldmann applanation tonometry and non-contact tonometry.

To compare the postoperative intraocular pressure (IOP) of eyes following pars plana vitrectomy (PPV) combined with intravitreal silicone oil (SO) tamponade by Corneal Visualization Scheimpflug Technology (CST), Goldmann applanation tonometry (GAT) and non-contact tonometry (NCT). Thirty-eight participants who had undergone PPV combined with SO tamponade to treat vitreoretinal diseases were enrolled. Postoperative IOP measurements were obtained using CST, NCT and GAT. Inter-device agreement was assessed by Bland-Altman analysis. The correlation coefficient was used to describe the potential postoperative factors affecting the postoperative IOP differences between each device. Bland-Altman analysis revealed the bias between CST and GAT, between CST and NCT, and between GAT and NCT to be -0.2, 2.1 and 2.4mmHg, respectively. CST and GAT correlated well with each other. NCT values were lower than those of GAT and CST (all p<0.05), whereas CST values did not differ from the GAT readings. Central corneal thickness, corneal biomechanical properties and age showed significant correlation with the differences of CST-NCT and GAT-NCT. In SO tamponade eyes, NCT obtains lower IOP than other tonometry techniques, and CST is highly consistent with GAT. CST offers an optional non-contact method for measuring postoperative IOP in SO tamponade eyes.

Eye retraction and rotation during Corvis ST 'air puff' intraocular pressure measurement and its quantitative analysis.

The aim of this study was to analyse the indentation and deformation of the corneal surface, as well as eye retraction, which occur during air puff intraocular pressure (IOP) measurement. A group of 10 subjects was examined using a non-contact Corvis ST tonometer, which records image sequences of corneas deformed by an air puff. Obtained images were processed numerically in order to extract information about corneal deformation, indentation and eyeball retraction. The time dependency of the apex deformation/eye retraction ratio and the curve of dependency between apex indentation and eye retraction take characteristic shapes for individual subjects. It was noticed that the eye globes tend to rotate towards the nose in response to the air blast during measurement. This means that the eye globe not only displaces but also rotates during retraction. Some new parameters describing the shape of this curve are introduced. Our data show that intraocular pressure and amplitude of corneal indentation are inversely related (r8 =-0.83, P=0.0029), but the correlation between intraocular pressure and amplitude of eye retraction is low and not significant (r8 =-0.24, P=0.51). The curves describing corneal behaviour during air puff tonometry were determined and show that the eye globe rotates towards the nose during measurement. In addition, eye retraction amplitudes may be related to elastic or viscoelastic properties of deeper structures in the eye or behind the eye and this should be further investigated. Many of the proposed new parameters present comparable or even higher repeatability than the standard parameters provided by the CorvisST.

Evaluation of Corneal Deformation Parameters Provided by the Corvis ST Tonometer After Trabeculectomy.

The aims of this study were to evaluate how the corneal deformation parameters provided by the Corvis ST tonometer (CST) were influenced by pressure-lowering ocular surgery, and to determine the correlations of intraocular pressure (IOP) and axial length (AL) with CST corneal deformation parameters. This prospective 1-month study enrolled 22 subjects (22 eyes) who underwent trabeculectomy combined with mitomycin C. The corneal deformation parameters were measured using the CST. IOP was measured before and after surgery by a Goldmann applanation tonometer and the CST. The central corneal thickness and AL were also recorded. The correlations of the corneal deformation parameters with central corneal thickness, AL, and IOP changes were determined by linear regression analysis. IOP decreased significantly after surgery. AL was significantly shorter at 1 week after surgery. There were significant changes in the CST parameters time 1, velocity 1, velocity 2, peak distance highest concavity, and deformation amplitude highest concavity at 1 week and 1 month after surgery and in time highest concavity at 1 week after surgery. The change in time 1 was significantly correlated with preoperative IOP and the IOP reductions, and was positively correlated with the decrease in AL at 1 week. The increase in velocity 1 was negatively correlated with preoperative IOP, and IOP reductions. The change in time highest concavity was negatively correlated with IOP before surgery and the decrease in IOP at 1 week. CST is a good choice for measuring IOP, especially when aiming for normalization of IOP after glaucoma surgery.

Corneal deformation dynamics in normal and glaucoma patients utilizing scheimpflug imaging.

The purpose of this study was to explore the corneal deformation dynamics recorded in raw Scheimpflug images of CorVis ST tonometer to evaluate age- and glaucoma-related changes in corneal biomechanics. This was a prospective study in which 18 subjects were recruited and divided into three equal groups (healthy young, healthy older and older glaucoma group). Up to three measurements by CorVis ST tonometer were acquired on the left eye of each subject. Raw Scheimpflug images of CorVis ST were used to extract changes in anterior and posterior corneal profiles, which were further modeled by a Chebyshev polynomial expansion of optimally determined order. Corneal deformation dynamics were studied via time-varying series of Chebyshev polynomial coefficients, in which three phases of corneal deformation were determined. The first and the last phase of corneal dynamics were fitted with bilinear functions. Further, the slope of each linear trend in the model was tested between the groups. Statistically significant differences were observed in the final return phase of corneal dynamics between the older group of subjects and those of glaucoma subjects indicating possible biomechanical differences in their tissues that could only be observed with minimum applied pressure.

Corvis ST Tonometer for Measuring Postoperative IOP in LASIK Patients.

To compare the postoperative measurements of intraocular pressure (IOP) using the Corvis ST Tonometer (CST), ocular response analyzer (ORA), and Goldmann applanation tonometry (GAT) in eyes undergoing laser in situ keratomileusis (LASIK), as well as to analyze the relationship between the corneal biomechanical parameters of the CST and the ORA. Fifty participants who had undergone LASIK to treat myopia in the previous 3 months were enrolled. Postoperative IOP measurements of these participants were obtained using the CST, ORA (corneal-compensated IOP [IOPcc], Goldmann-correlated IOP [IOPg]), and GAT. Device agreement was calculated by Bland-Altman analysis. The metrics of corneal biomechanical properties were recorded using the ORA and the CST. Corneal biomechanical parameters were compared. The Bland-Altman analysis revealed a significant bias between CST and GAT, between CST and IOPcc, and between CST and IOPg of 3.4, 1.0, and 3.8, mm Hg, respectively, with 95% limits of agreement of -0.7 to 7.5 mm Hg, -2.1 to 4.2 mm Hg, and -0.4 to 8.0 mm Hg. The ORA-derived IOP measurements, CST-derived IOP, and GAT IOP values showed good correlation with each other. The CST IOP and IOPcc were higher than the GAT IOP (all p < 0.05), whereas IOPg did not differ from the GAT IOP readings. Ocular response analyzer-derived corneal biomechanical parameters (corneal hysteresis and the corneal resistance factor) showed significant correlations with CST-derived parameters, including the maximum deformation amplitude at the corneal apex and the time from start until the first applanation. The CST offers an alternative method for measuring postoperative IOP in LASIK patients, and it appears to obtain higher IOP values than other tonometry techniques. The technique may facilitate the investigation of corneal biomechanical property changes in LASIK-treated eyes.