ABSTRACT This study explores the increasing utilisation of lightweight materials, particularly magnesium (Mg) alloy, in sectors such as automobile, aerospace, and marine due to its notable advantages such as high strength-to-weight ratio, good castability, and excellent damping capacity. Despite these merits, Mg alloy faces challenges, notably in wear and corrosion resistance. The research focuses on enhancing the corrosion resistance of Mg alloy by incorporating Zinc Oxide (ZnO), Manganese Oxide (MnO), and Titanium Oxide (TiO2) nanoparticles. The alloy AZ91D and three nanocomposites, namely AZ91D + 1% ZnO, AZ91D + 1% MnO, and AZ91D + 1% TiO2, were manufactured using a stir squeeze casting technique combined with an ultrasonication process. To confirm the even distribution of reinforcement particles, Optical Microscope (OM), Scanning Electron Microscope (SEM) and High-Resolution Scanning Electron Microscope (HR-SEM) were employed. X-ray Diffraction (XRD) analysis revealed the presence of matrix and reinforcement material with intermetallic precipitates around the grain boundaries. Corrosion properties were assessed following ASTM standards and utilising a 3.5% NaCl concentration. The study found that AZ91D + 1% TiO2 nanocomposites exhibited superior corrosion resistance compared to the AZ91D alloy, showing a remarkable 77.78% and 69.89% improvement in corrosion behaviour under salt spray and immersion environments, respectively, after 48 hours.
Read full abstract