Correction Of Motion Artifacts Research Articles

Distinguishing motion artifacts during optical fiber-based in-vivo hemodynamics recordings from brain regions of freely moving rodents.

Motion artifacts in the signals recorded during optical fiber-based measurements can lead to misinterpretation of data. In this work, we address this problem during in-vivo rodent experiments and develop a motion artifacts correction (MAC) algorithm for single-fiber system (SFS) hemodynamics measurements from the brains of rodents. (i)To distinguish the effect of motion artifacts in the SFS signals. (ii)Develop a MAC algorithm by combining information from the experiments and simulations and validate it. Monte-Carlo (MC) simulations were performed across 450 to 790nm to identify wavelengths where the reflectance is least sensitive to blood absorption-based changes. This wavelength region is then used to develop a quantitative metric to measure motion artifacts, termed the dissimilarity metric (DM). We used MC simulations to mimic artifacts seen during experiments. Further, we developed a mathematical model describing light intensity at various optical interfaces. Finally, an MAC algorithm was formulated and validated using simulation and experimental data. We found that the 670 to 680nm wavelength region is relatively less sensitive to blood absorption. The standard deviation of DM () can measure the relative magnitude of motion artifacts in the SFS signals. The artifacts cause rapid shifts in the reflectance data that can be modeled as transmission changes in the optical lightpath. The changes observed during the experiment were found to be in agreement to those obtained from MC simulations. The mathematical model developed to model transmission changes to represent motion artifacts was extended to an MAC algorithm. The MAC algorithm was validated using simulations and experimental data. We distinguished motion artifacts from SFS signals during in vivo hemodynamic monitoring experiments. From simulation and experimental data, we showed that motion artifacts can be modeled as transmission changes. The developed MAC algorithm was shown to minimize artifactual variations in both simulation and experimental data.

Hammerstein-Wiener Motion Artifact Correction for Functional Near-Infrared Spectroscopy: A Novel Inertial Measurement Unit-Based Technique.

Participant movement is a major source of artifacts in functional near-infrared spectroscopy (fNIRS) experiments. Mitigating the impact of motion artifacts (MAs) is crucial to estimate brain activity robustly. Here, we suggest and evaluate a novel application of the nonlinear Hammerstein-Wiener model to estimate and mitigate MAs in fNIRS signals from direct-movement recordings through IMU sensors mounted on the participant's head (head-IMU) and the fNIRS probe (probe-IMU). To this end, we analyzed the hemodynamic responses of single-channel oxyhemoglobin (HbO) and deoxyhemoglobin (HbR) signals from 17 participants who performed a hand tapping task with different levels of concurrent head movement. Additionally, the tapping task was performed without head movements to estimate the ground-truth brain activation. We compared the performance of our novel approach with the probe-IMU and head-IMU to eight established methods (PCA, tPCA, spline, spline Savitzky-Golay, wavelet, CBSI, RLOESS, and WCBSI) on four quality metrics: SNR, △AUC, RMSE, and R. Our proposed nonlinear Hammerstein-Wiener method achieved the best SNR increase (p < 0.001) among all methods. Visual inspection revealed that our approach mitigated MA contaminations that other techniques could not remove effectively. MA correction quality was comparable with head- and probe-IMUs.

Swin Transformer and the Unet Architecture to Correct Motion Artifacts in Magnetic Resonance Image Reconstruction.

We present a deep learning-based method that corrects motion artifacts and thus accelerates data acquisition and reconstruction of magnetic resonance images. The novel model, the Motion Artifact Correction by Swin Network (MACS-Net), uses a Swin transformer layer as the fundamental block and the Unet architecture as the neural network backbone. We employ a hierarchical transformer with shifted windows to extract multiscale contextual features during encoding. A new dual upsampling technique is employed to enhance the spatial resolutions of feature maps in the Swin transformer-based decoder layer. A raw magnetic resonance imaging dataset is used for network training and testing; the data contain various motion artifacts with ground truth images of the same subjects. The results were compared to six state-of-the-art MRI image motion correction methods using two types of motions. When motions were brief (within 5 s), the method reduced the average normalized root mean square error (NRMSE) from 45.25% to 17.51%, increased the mean structural similarity index measure (SSIM) from 79.43% to 91.72%, and increased the peak signal-to-noise ratio (PSNR) from 18.24 to 26.57 dB. Similarly, when motions were extended from 5 to 10 s, our approach decreased the average NRMSE from 60.30% to 21.04%, improved the mean SSIM from 33.86% to 90.33%, and increased the PSNR from 15.64 to 24.99 dB. The anatomical structures of the corrected images and the motion-free brain data were similar.

Wearable Ring-Shaped Biomedical Device for Physiological Monitoring through Finger-Based Acquisition of Electrocardiographic, Photoplethysmographic, and Galvanic Skin Response Signals: Design and Preliminary Measurements.

Wearable health devices (WHDs) are rapidly gaining ground in the biomedical field due to their ability to monitor the individual physiological state in everyday life scenarios, while providing a comfortable wear experience. This study introduces a novel wearable biomedical device capable of synchronously acquiring electrocardiographic (ECG), photoplethysmographic (PPG), galvanic skin response (GSR) and motion signals. The device has been specifically designed to be worn on a finger, enabling the acquisition of all biosignals directly on the fingertips, offering the significant advantage of being very comfortable and easy to be employed by the users. The simultaneous acquisition of different biosignals allows the extraction of important physiological indices, such as heart rate (HR) and its variability (HRV), pulse arrival time (PAT), GSR level, blood oxygenation level (SpO2), and respiratory rate, as well as motion detection, enabling the assessment of physiological states, together with the detection of potential physical and mental stress conditions. Preliminary measurements have been conducted on healthy subjects using a measurement protocol consisting of resting states (i.e., SUPINE and SIT) alternated with physiological stress conditions (i.e., STAND and WALK). Statistical analyses have been carried out among the distributions of the physiological indices extracted in time, frequency, and information domains, evaluated under different physiological conditions. The results of our analyses demonstrate the capability of the device to detect changes between rest and stress conditions, thereby encouraging its use for assessing individuals' physiological state. Furthermore, the possibility of performing synchronous acquisitions of PPG and ECG signals has allowed us to compare HRV and pulse rate variability (PRV) indices, so as to corroborate the reliability of PRV analysis under stationary physical conditions. Finally, the study confirms the already known limitations of wearable devices during physical activities, suggesting the use of algorithms for motion artifact correction.

Evaluation of Motion Artifact Correction Technique for Cone-Beam Computed Tomography Image Considering Blood Vessel Geometry.

Background: In this study, we present a quantitative method to evaluate the motion artifact correction (MAC) technique through the morphological analysis of blood vessels in the images before and after MAC. Methods: Cone-beam computed tomography (CBCT) scans of 37 patients who underwent transcatheter chemoembolization were obtained, and images were reconstructed with and without the MAC technique. First, two interventional radiologists selected the blood vessels corrected by MAC. We devised a motion-corrected index (MCI) metric that analyzed the morphology of blood vessels in 3D space using information on the centerline of blood vessels, and the blood vessels selected by the interventional radiologists were quantitatively evaluated using MCI. In addition, these blood vessels were qualitatively evaluated by two interventional radiologists. To validate the effectiveness of the devised MCI, we compared the MCI values in a blood vessel corrected by MAC and one non-corrected by MAC. Results: The visual evaluation revealed that motion correction was found in the images of 23 of 37 patients (62.2%), and a performance evaluation of MAC was performed with 54 blood vessels in 23 patients. The visual grading analysis score was 1.56 ± 0.57 (radiologist 1) and 1.56 ± 0.63 (radiologist 2), and the proposed MCI was 0.67 ± 0.11, indicating that the vascular morphology was well corrected by the MAC. Conclusions: We verified that our proposed method is useful for evaluating the MAC technique of CBCT, and the MAC technique can correct the blood vessels distorted by the patient's movement and respiration.

Implicit neural representations in light microscopy.

Three-dimensional stacks acquired with confocal or two-photon microscopy are crucial for studying neuroanatomy. However, high-resolution image stacks acquired at multiple depths are time-consuming and susceptible to photobleaching. In vivo microscopy is further prone to motion artifacts. In this work, we suggest that deep neural networks with sine activation functions encoding implicit neural representations (SIRENs) are suitable for predicting intermediate planes and correcting motion artifacts, addressing the aforementioned shortcomings. We show that we can accurately estimate intermediate planes across multiple micrometers and fully automatically and unsupervised estimate a motion-corrected denoised picture. We show that noise statistics can be affected by SIRENs, however, rescued by a downstream denoising neural network, shown exemplarily with the recovery of dendritic spines. We believe that the application of these technologies will facilitate more efficient acquisition and superior post-processing in the future.

Cycle Consistent Generative Motion Artifact Correction in Coronary Computed Tomography Angiography

In coronary computed tomography angiography (CCTA), motion artifacts due to heartbeats can obscure coronary artery diagnoses. In this study, we introduce a cycle-consistent adversarial-network-based method for motion artifact correction in CCTA. Our methodology involves extracting image patches and using style transfer for synthetic ground truth creation, followed by CycleGAN network training for motion compensation. We employ Dynamic Time Warping (DTW) to align extracted image patches along the artery centerline with their corresponding motion-free phase patches, ensuring matched pixel correspondences and similar anatomical features for accuracy in subsequent processing steps. Our quantitative analysis, using metrics like the Dice Similarity Coefficient (DSC) and Hausdorff Distance (HD), demonstrates CycleGAN’s superior performance in reducing motion artifacts, with improvements in image quality and clarity. An observer study using a 5-point Likert scale further validates the reduction of motion artifacts and improved visibility of coronary arteries. Additionally, we present a quantitative analysis on clinical data, affirming the correction of motion artifacts through metric-based evaluations.

Motion artifact correction in cardiac CT using cross-phase temporospatial information and synergistic attention gate and spatial transformer sub-networks

Objectives. To improve quality of coronary CT angiography (CCTA) images using a generalizable motion-correction algorithm. Approach. A neural network with attention gate and spatial transformer (ATOM) was developed to correct coronary motion. Phantom and patient CCTA images (39 males, 32 females, age range 19–92, scan date 02/2020 to 10/2021) retrospectively collected from dual-source CT were used to create training, development, and testing sets corresponding to 140- and 75 ms temporal resolution, with 75 ms images as labels. To test generalizability, ATOM was deployed for locally adaptive motion-correction in both 140- and 75 ms patient images. Objective metrics were used to assess motion-corrupted and corrected phantom and patient images, including structural-similarity-index (SSIM), dice-similarity-coefficient (DSC), peak-signal-noise-ratio (PSNR), and normalized root-mean-square-error (NRMSE). In objective quality assessment, ATOM was compared with several baseline networks, including U-net, U-net plus attention gate, U-net plus spatial transformer, VDSR, and ResNet. Two cardiac radiologists independently interpreted motion-corrupted and -corrected images at 75 and 140 ms in a blinded fashion and ranked diagnostic image quality (worst to best: 1–4, no ties). Main results. ATOM improved quality metrics (p < 0.05) before/after correction: in phantom, SSIM 0.87/0.95, DSC 0.85/0.93, PSNR 19.4/22.5, NRMSE 0.38/0.27; in patient images, SSIM 0.82/0.88, DSC 0.88/0.90, PSNR 30.0/32.0, NRMSE 0.16/0.12. ATOM provided more consistent improvement of objective image quality, compared to the presented baseline networks. The motion-corrected images received better ranks than un-corrected at the same temporal resolution (p < 0.05): 140 ms images 1.65/2.25, and 75 ms images 3.1/3.2. The motion-corrected 75 ms images received the best rank in 65% of testing cases. A fair-to-good inter-reader agreement was observed (Kappa score 0.58). Significance. ATOM reduces motion artifacts, improving visualization of coronary arteries. This algorithm can be used to virtually improve temporal resolution in both single- and dual-source CT.

Unsupervised motion artifact correction of turbo spin-echo MRI using deep image prior.

In MRI, motion artifacts can significantly degrade image quality. Motion artifact correction methods using deep neural networks usually required extensive training on large datasets, making them time-consuming and resource-intensive. In this paper, an unsupervised deep learning-based motion artifact correction method for turbo-spin echo MRI is proposed using the deep image prior framework. The proposed approach takes advantage of the high impedance to motion artifacts offered by the neural network parameterization to remove motion artifacts in MR images. The framework consists of parameterization of MR image, automatic spatial transformation, and motion simulation model. The proposed method synthesizes motion-corrupted images from the motion-corrected images generated by the convolutional neural network, where an optimization process minimizes the objective function between the synthesized images and the acquired images. In the simulation study of 280 slices from 14 subjects, the proposed method showed a significant increase in the averaged structural similarity index measure by 0.2737 in individual coil images and by 0.4550 in the root-sum-of-square images. In addition, the ablation study demonstrated the effectiveness of each proposed component in correcting motion artifacts compared to the corrected images produced by the baseline method. The experiments on real motion dataset has shown its clinical potential. The proposed method exhibited significant quantitative and qualitative improvements in correcting rigid and in-plane motion artifacts in MR images acquired using turbo spin-echo sequence.

Feasibility of a Prototype Image Reconstruction Algorithm for Motion Correction in Interventional Cone-Beam CT Scans

Assess the feasibility of a prototype image reconstruction algorithm in correcting motion artifacts in cone-beam computed tomography (CBCT) scans of interventional instruments in the lung. First, phantom experiments were performed to assess the algorithm, using the Xsight lung phantom with custom inserts containing straight or curved catheters. During scanning, the inserts moved in a continuous sinusoidal or breath-hold mimicking pattern, with varying amplitudes and frequencies. Subsequently, the algorithm was applied to CBCT data from navigation bronchoscopy procedures. The algorithm's performance was assessed quantitatively via edge-sharpness measurements and qualitatively by three specialists. In the phantom study, the algorithm improved sharpness in 13 out of 14 continuous sinusoidal motion and five out of sevenbreath-hold mimicking scans, with more significant effects at larger motion amplitudes. Analysis of 27 clinical scans showed that the motion corrected reconstructions had significantly sharper edges than standard reconstructions (2.81 (2.24-6.46) vs. 2.80 (2.16-4.75), p=0.003). These results were consistent with the qualitative assessment, which showed higher scores in the sharpness of bronchoscope-tissue interface and catheter-tissue interface in the motion-corrected reconstructions. However, the tumor demarcation ratings were inconsistent between raters, and the overall image quality of the new reconstructions was rated lower. Our findings suggest that applying the new prototype algorithm for motion correction in CBCT images is feasible. The algorithm improved the sharpness of medical instruments in CBCT scans obtained during diagnostic navigation bronchoscopy procedures, which was demonstrated both quantitatively and qualitatively.

Evaluation of Image Quality of Motion-Corrected Supine Breast MRI.

Breast MRI is the most performant modality for breast cancer diagnosis and could be widespread in the future. The gold standard breast MRI is performed in the prone position, but comfort and correlation with surgery or biopsy positioning can be problematic, while supine MRI could be an interesting alternative. In this work, we evaluated the image quality of T2-weighted supine breast MRI in healthy volunteers after online correction of respiratory motion artifacts compared to standard vendor's reconstruction and to standard prone MRI. T2-weighted images were acquired in the prone and free-breathing supine position in 10 volunteers. Two types of reconstructions were evaluated for supine acquisitions: the standard vendor's reconstruction and an online version of a nonrigid motion correction technique (generalized reconstruction by inversion of coupled system). Image quality criteria, including overall quality, sharpness, uniformity, and different types of artifacts, were assessed and scored by 2 radiologists in a randomized fashion. Interobserver agreement was verified by Weighted Cohen's Kappa calculation and a comparison between the different acquisitions was made by Wilcoxon signed-rank test. Generalized Reconstruction by Inversion of Coupled Systems (GRICS) reconstruction method significantly increased image quality in comparison to the standard reconstruction of supine acquisition. It allows a comparable quality, slightly lower than the gold standard prone MRI in T2-weighted images but it needs to be assessed with more patients and with target lesions before it can be used in clinical practice.

Correction of Arterial-Phase Motion Artifacts in Gadoxetic Acid-Enhanced Liver MRI Using an Innovative Unsupervised Network.

This study aims to propose and evaluate DR-CycleGAN, a disentangled unsupervised network by introducing a novel content-consistency loss, for removing arterial-phase motion artifacts in gadoxetic acid-enhanced liver MRI examinations. From June 2020 to July 2021, gadoxetic acid-enhanced liver MRI data were retrospectively collected in this center to establish training and testing datasets. Motion artifacts were semi-quantitatively assessed using a five-point Likert scale (1 = no artifact, 2 = mild, 3 = moderate, 4 = severe, and 5 = non-diagnostic) and quantitatively evaluated using the structural similarity index (SSIM) and peak signal-to-noise ratio (PSNR). The datasets comprised a training dataset (308 examinations, including 58 examinations with artifact grade = 1 and 250 examinations with artifact grade ≥ 2), a paired test dataset (320 examinations, including 160 examinations with artifact grade = 1 and paired 160 examinations with simulated motion artifacts of grade ≥ 2), and an unpaired test dataset (474 examinations with artifact grade ranging from 1 to 5). The performance of DR-CycleGAN was evaluated and compared with a state-of-the-art network, Cycle-MedGAN V2.0. As a result, in the paired test dataset, DR-CycleGAN demonstrated significantly higher SSIM and PSNR values and lower motion artifact grades compared to Cycle-MedGAN V2.0 (0.89 ± 0.07 vs. 0.84 ± 0.09, 32.88 ± 2.11 vs. 30.81 ± 2.64, and 2.7 ± 0.7 vs. 3.0 ± 0.9, respectively; p < 0.001 each). In the unpaired test dataset, DR-CycleGAN also exhibited a superior motion artifact correction performance, resulting in a significant decrease in motion artifact grades from 2.9 ± 1.3 to 2.0 ± 0.6 compared to Cycle-MedGAN V2.0 (to 2.4 ± 0.9, p < 0.001). In conclusion, DR-CycleGAN effectively reduces motion artifacts in the arterial phase images of gadoxetic acid-enhanced liver MRI examinations, offering the potential to enhance image quality.

Fully Automated, Fast Motion Correction of Dynamic Whole-Body and Total-Body PET/CT Imaging Studies.

We introduce the Fast Algorithm for Motion Correction (FALCON) software, which allows correction of both rigid and nonlinear motion artifacts in dynamic whole-body (WB) images, irrespective of the PET/CT system or the tracer. Methods: Motion was corrected using affine alignment followed by a diffeomorphic approach to account for nonrigid deformations. In both steps, images were registered using multiscale image alignment. Moreover, the frames suited to successful motion correction were automatically estimated by calculating the initial normalized cross-correlation metric between the reference frame and the other moving frames. To evaluate motion correction performance, WB dynamic image sequences from 3 different PET/CT systems (Biograph mCT, Biograph Vision 600, and uEXPLORER) using 6 different tracers (18F-FDG, 18F-fluciclovine, 68Ga-PSMA, 68Ga-DOTATATE, 11C-Pittsburgh compound B, and 82Rb) were considered. Motion correction accuracy was assessed using 4 different measures: change in volume mismatch between individual WB image volumes to assess gross body motion, change in displacement of a large organ (liver dome) within the torso due to respiration, change in intensity in small tumor nodules due to motion blur, and constancy of activity concentration levels. Results: Motion correction decreased gross body motion artifacts and reduced volume mismatch across dynamic frames by about 50%. Moreover, large-organ motion correction was assessed on the basis of correction of liver dome motion, which was removed entirely in about 70% of all cases. Motion correction also improved tumor intensity, resulting in an average increase in tumor SUVs by 15%. Large deformations seen in gated cardiac 82Rb images were managed without leading to anomalous distortions or substantial intensity changes in the resulting images. Finally, the constancy of activity concentration levels was reasonably preserved (<2% change) in large organs before and after motion correction. Conclusion: FALCON allows fast and accurate correction of rigid and nonrigid WB motion artifacts while being insensitive to scanner hardware or tracer distribution, making it applicable to a wide range of PET imaging scenarios.

Improved Motion Artifact Correction in fNIRS Data by Combining Wavelet and Correlation-Based Signal Improvement.

Functional near-infrared spectroscopy (fNIRS) is an optical non-invasive neuroimaging technique that allows participants to move relatively freely. However, head movements frequently cause optode movements relative to the head, leading to motion artifacts (MA) in the measured signal. Here, we propose an improved algorithmic approach for MA correction that combines wavelet and correlation-based signal improvement (WCBSI). We compare its MA correction accuracy to multiple established correction approaches (spline interpolation, spline-Savitzky-Golay filter, principal component analysis, targeted principal component analysis, robust locally weighted regression smoothing filter, wavelet filter, and correlation-based signal improvement) on real data. Therefore, we measured brain activity in 20 participants performing a hand-tapping task and simultaneously moving their head to produce MAs at different levels of severity. In order to obtain a "ground truth" brain activation, we added a condition in which only the tapping task was performed. We compared the MA correction performance among the algorithms on four predefined metrics (R, RMSE, MAPE, and ΔAUC) and ranked the performances. The suggested WCBSI algorithm was the only one exceeding average performance (p < 0.001), and it had the highest probability to be the best ranked algorithm (78.8% probability). Together, our results indicate that among all algorithms tested, our suggested WCBSI approach performed consistently favorably across all measures.

Hybrid deep autoencoder network based adaptive cross guided bilateral filter for motion artifacts correction and denoising from MRI

ABSTRACT Removal of motion artifacts from medical images is essential, because the respiration by patient causes degradation in artifact removal. Therefore, getting an MRI without any artifacts and noise is challenging. Previous techniques failed to preserve the image quality during denoising, thereby affecting the classification accuracy. To overcome such challenges, two modules are considered in this work: classification and denoising. The classification process is successfully performed by Hybrid Deep autoencoder-convolutional neural network (DAE-CNN). It classifies the original images into motion artifacts, available and normal images. Then, the available artifacts are removed using cross guided bilateral filter (CGBF). The optimal parameters required to improve the CGBF performance are selected using the hybrid optimization algorithm. The filter’s performance relies on the optimal spatial and range kernels selection. Finally, the classification and denoising-based results are evaluated using the BRATS 2015 dataset and achieved 95.84% accuracy and PSNR – 46.4, which is better than existing methods.

Automated motion artifact correction for dynamic contrast-enhanced fluorescence imaging during open orthopedic surgery.

Indocyanine green (ICG)-based dynamic contrast-enhanced fluorescence imaging (DCE-FI) can objectively assess bone perfusion intraoperatively. However, it is susceptible to motion artifacts due to patient's involuntary respiration during the 4.5-minute DCE-FI data acquisition. An automated motion correction approach based on mutual information (MI) frameby-frame was developed to overcome this problem. In this approach, MIs were calculated between the reference and the adjacent frame translated and the maximal MI corresponded to the optimal translation. The images obtained from eighteen amputation cases were utilized to validate the approach and the results show that this correction can significantly reduce the motion artifacts and can improve the accuracy of bone perfusion assessment.

Respiration and heartbeat motion correction of intraoperative thermographic images in neurosurgery

In this paper, a new respiration and heartbeat motion artifacts correction method for thermographic images in neurosurgery is presented. Aims to solve the ambiguity of the respiration and heartbeat motion artifacts correction of thermographic images in neurosurgery. The proposed method consists of two main steps; firstly, a complex steerable pyramid is employed to separate the local wavelets of the phase for each thermographic image. Thereafter, temporal filtering is carried out to pass respiration and heartbeat frequencies and reject other frequencies outside that range followed by image reconstruction. Secondly, the optimized and adjusted-combined local and global (OA-CLG) method is applied to detect respiration and heartbeat motion artifacts only. Afterwards, a bicubic interpolation is carried out to compensate the estimated motion artifacts. To evaluate the proposed method’s performance and accuracy, 10 clinical thermographic datasets were examined. Results show that with the proposed method respiration and heartbeat motion artifacts can be corrected while preserving the image structures, properties, spatial resolution, and maintaining temperature values.

Effect of a Motion Artifact Correction System on Cone-Beam Computed Tomography Image Characteristics.

Determine the effect of the motion correction system on cone-beam computed tomography (CBCT) image quality parameters, artifacts, and contrast-to-noise ratio (CNR) using different motion settings. A customized phantom insert array was prepared using SEDENTEX CT IQ Phantom (Leeds Test Objects, Yorkshire, England) stabilized over a rotating electric turntable. Thirty baseline CBCT scans were acquired with standardized technique factors on the ProMax 3D (Planmeca, Helsinki, Finland) machine using combinations of different motion settings, including no motion, three- and six-degree motion, and with and without the use of a motion correction system. The standardized images were exported to ImageJ software. Image quality parameters, artifacts, and CNRvalues were evaluated and compared among the different acquisition settings. The use of the motion correction system algorithm compared with the different motion settings showed a statistically significant difference for all the parameters (p<0.05) except for artifact values for six-degree motion (p<0.07). The effect of different motion settings on the parameters was not statistically significant. The use of a motion correction system, a proprietary algorithm-based system incorporated in the ProMax 3D CBCT unit, deteriorates the image quality characteristics evaluated in this in vitro study, namely artifact value and CNR. Its use in clinical settings might be limited to situations where patient motion is expected and appropriate head stabilization is not possible due to age or disease.

A knowledge interaction learning for multi-echo MRI motion artifact correction towards better enhancement of SWI

Patient movement during Magnetic Resonance Imaging (MRI) scan can cause severe degradation of image quality. In Susceptibility Weighted Imaging (SWI), several echoes are typically measured during a single repetition period, where the earliest echoes show less contrast between various tissues, while the later echoes are more susceptible to artifacts and signal dropout. In this paper, we propose a knowledge interaction paradigm that jointly learns feature details from multiple distorted echoes by sharing their knowledge with unified training parameters, thereby simultaneously reducing motion artifacts of all echoes. This is accomplished by developing a new scheme that boosts a Single Encoder with Multiple Decoders (SEMD), which assures that the generated features not only get fused but also learned together. We called the proposed method Knowledge Interaction Learning between Multi-Echo data (KIL-ME-based SEMD). The proposed KIL-ME-based SEMD allows to share information and gain an understanding of the correlations between the multiple echoes. The main purpose of this work is to correct the motion artifacts and maintain image quality and structure details of all motion-corrupted echoes towards generating high-resolution susceptibility enhanced contrast images, i.e., SWI, using a weighted average of multi-echo motion-corrected acquisitions. We also compare various potential strategies that might be used to address the problem of reducing artifacts in multi-echoes data. The experimental results demonstrate the feasibility and effectiveness of the proposed method, reducing the severity of motion artifacts and improving the overall clinical image quality of all echoes with their associated SWI maps. Significant improvement of image quality is observed using both motion-simulated test data and actual volunteer data with various motion severity strengths. Eventually, by enhancing the overall image quality, the proposed network can increase the effectiveness of the physicians' capability to evaluate and correctly diagnose brain MR images.

A Deep Learning Method for Motion Artifact Correction in Intravascular Photoacoustic Image Sequence.

In vivo application of intravascular photoacoustic (IVPA) imaging for coronary arteries is hampered by motion artifacts associated with the cardiac cycle. Gating is a common strategy to mitigate motion artifacts. However, a large amount of diagnostically valuable information might be lost due to one frame per cycle. In this work, we present a deep learning-based method for directly correcting motion artifacts in non-gated IVPA pullback sequences. The raw signal frames are classified into dynamic and static frames by clustering. Then, a neural network named Motion Artifact Correction (MAC)-Net is designed to correct motion in dynamic frames. Given the lack of the ground truth information on the underlying dynamics of coronary arteries, we trained and tested the network using a computer-generated dataset. Based on the results, it has been observed that the trained network can directly correct motion in successive frames while preserving the original structures without discarding any frames. The improvement in the visual effect of the longitudinal view has been demonstrated based on quantitative evaluation of the inter-frame dissimilarity. The comparison results validated the motion-suppression ability of our method comparable to gating and image registration-based non-learning methods, while maintaining the integrity of the pullbacks without image preprocessing. Experimental results from in vivo intravascular ultrasound and optical coherence tomography pullbacks validated the feasibility of our method in the in vivo intracoronary imaging scenario.