Correction Fixation Research Articles

Outcomes following instrumentation removal after posterior corrective fixation in adolescent idiopathic scoliosis.

To evaluate the complications and postoperative outcomes of implant removal after posterior fixation in adolescent idiopathic scoliosis. We retrospectively reviewed the data of patients who underwent implant removal after posterior corrective fixation for adolescent idiopathic scoliosis between 2002 and 2014. Complications were evaluated in the 116 patients who underwent implant removal at their choice. Radiological evaluations were performed and analyzed in 71 patients who were followed up for > 2years after implant removal. Moreover, the patients were divided into two groups: those with increased thoracic kyphosis after implant removal and those without. Overall, 14 of the 116 patients had complications. Two of the three patients with fractures required reoperation. Radiological examination revealed no significant difference in the scoliosis curvature in the coronal plane after implant removal. In the sagittal plane, the lowest instrumented vertebral tilt, cervical lordosis, T1 slope, T1-12 kyphosis angle, and T5-12 kyphosis angle were significantly increased. Moreover, patients with an increased T5-12 kyphosis angle after implant removal had greater pelvic incidence (PI) and sacral slope (SS) before implant removal. The prevalence of complications after implant removal in adolescent idiopathic scoliosis was 12.1%. Spinal alignment is more variable in the sagittal plane than in the coronal plane, and patients with increased thoracic kyphosis after implant removal have greater preoperative PI and SS. Sufficient preoperative explanation is necessary if a patient wishes to undergo implant removal.

Proof of corruption offenses

The scientific article focuses on the key aspects of the problem related to identifying and proving the facts of corrupt activity and turning such activity into an investigation. The investigation itself is connected with the collection and assessment of evidence, their correct fixation. Particular attention is paid to ensuring that all collected evidence is included in the criminal proceedings and evaluated correctly by the court. In this case, the evidence must be proper, admissible, reliable and sufficient. Methods of evidence collection, features of their assessment, and attachment to the proceedings are analyzed. The evidence must relate to the circumstances of the criminal proceedings and include: witness statements, written documents, material evidence, expert opinions and electronic evidence. The collection of evidence in such a category of cases as corruption requires detailed attention, since corruption offenses are secret schemes and agreements, the involvement of an intellectual component and the difficulty of detecting such actions. During the investigation of corruption offenses, indirect evidence is most often used, such as financial and accounting documents, electronic documentation between participants, to certify agreements, testimony of third parties. Special attention is paid to the normative and legal framework, which regulates the process of proof in corruption cases, as well as practical aspects of the work of law enforcement agencies. The article also highlights procedural violations of legislation in corruption offenses: presumption of innocence; conducting searches; dissemination of information obtained during the conduct of secret investigative (research) actions; excessive publicity; disclosure of information about persons who carry out confidential cooperation. A relevant aspect is a certain distinction between evidence that was obtained in a legal and illegal way: «clean» (the guilt of the accused was established on the basis of proper and admissible evidence and proved beyond a reasonable doubt) and «dirty» (inadmissible evidence was used, provocation was used, the rights of the participants were violated proceedings). In the process of formation and verification of evidence, the goal is to create specific means (evidence), then in the process of proving the circumstances of the crime, these means should be applied by way of argumentation, substantiating certain theses (conclusions, procedural decisions).

The Warming Management Measures May Need to Be Further Enhanced During Scoliosis Correction and Internal Fixation Surgery: A Retrospective Cohort Study.

The incidence of intraoperative hypothermia (IPH) exceeds 70% during spinal surgery, which can lead to many adverse outcomes, including increased intraoperative blood loss/transfusion and delayed recovery. We aimed to evaluate the comprehensive efficiency of a kind of enhanced warming measure on patients undergoing spinal surgery. A retrospective analysis was conducted on the clinical data, surgical procedures, and outcomes of consecutive patients admitted to the department of orthopedics of a hospital from December 2019 to May 2023 and undergoing spinal surgery (scoliosis correction and internal fixation surgery). The impact of the perioperative warming measures on surgical temperature variation and postoperative recovery was analyzed. The surgical patients who received normal active warming measures (quilt, blood transfusion and infusion warming, flushing fluid warming) were the control group (Normal Warming Group [NWG], n = 199), and the enhanced active warming measures (NWG and forced air warming) were the experimental group (Enhanced Warming Group [EWG], n = 201). Incidence of IPH was the primary endpoint of this study. EWG exhibited a significantly reduced incidence of IPH and average frequency of hypothermia per patient compared with NWG (respectively, p < 0.01) and demonstrated notable reductions in intraoperative blood loss, urine output, anesthesia recovery time, and duration of arousal (respectively, p < 0.05, p < 0.01, and p < 0.001). Postoperatively, EWG showed a significantly reduced incidence of shivering (p < 0.001) and had lower costs for postoperative antibiotic use and albumin administration (respectively, p < 0.05 and p < 0.01). So we infer that the occurrence of hypothermia during spinal surgery may seem unavoidable, but EWG can effectively lower the occurrence of IPH and its adverse outcomes, and then somewhat alleviate the postoperative treatment burden. However, given that this study is a retrospective cohort study, it is not yet possible to definitively prove the above conclusions, so we will design relevant prospective clinical studies to prove that the optimization of temperature management may be crucial to ensure optimal overall recovery outcomes.

Upper instrumented vertebra pedicle screw loosening following adult spinal deformity surgery: incidence and outcome analysis.

Surgical correction of adult spinal deformity (ASD) is associated with a high rate of hardware complication that can be challenging to predict. Hardware integrity and alignment after surgery are typically followed with standing radiography, where pedicle screw loosening may be incidentally identified but the clinical significance of which is often unclear. This study aimed to identify the incidence and implications of pedicle screw loosening at the upper instrumented vertebra (UIV) after surgical correction of ASD. A single-institution retrospective analysis was performed on a cohort of 217 patients who underwent long-segment fusion with pelvic fixation for correction of ASD between September 2013 and November 2021. Cases with a minimum 1-year follow-up were included. UIV pedicle screws were graded on radiographs for evidence of loosening with a 0- to 3-point scale: 0, no loosening; 1, lucency within screw threads; 2, lucency around screw threads; and 3, screw dislodgment/backout. Need for hardware revision surgery was assessed as the primary outcome. Patient-reported outcome measures (PROMIS and Oswestry Disability Index scores) were assessed as secondary outcomes among the patients with available scores. Low-grade UIV screw loosening (grade 1) was identified in 37 patients (17.1%), and high-grade UIV loosening (grade 2 or 3) was identified in 23 patients (10.6%). Low-grade UIV loosening was not associated with eventual need for hardware revision (OR 0.52, 95% CI 0.17-1.61, p = 0.258); however, high-grade loosening was associated with increased odds of hardware revision (OR 5.17, 95% CI 1.74-15.36, p = 0.003), including specifically surgery for correction of proximal junctional kyphosis (OR 5.73, 95% CI 1.27-25.95, p = 0.024). Among patients with PROMIS T-scores, those requiring hardware revision reported worse Pain Interference (65.0 ± 5.1 vs 59.6 ± 7.7, p = 0.001) and Physical Function (33.3 ± 5.6 vs 37.4 ± 7.4; p = 0.011). Patients with high-grade UIV loosening reported higher Oswestry Disability Index scores than those without high-grade loosening (grade 0 or 1), although this failed to reach statistical significance (44.0 ± 8.5 vs 33.7 ± 18.5, p = 0.101). Grade 1 UIV pedicle screw loosening may represent a benign incidental finding, whereas high-grade loosening is associated with significantly increased odds of hardware revision surgery. High-grade loosening may also be associated with worse patient-reported disability. The authors' findings suggest that while low-grade UIV loosening may often be managed expectantly, identification of high-grade UIV pedicle screw loosening on follow-up imaging warrants increased attention and continued surveillance.

Distal Tibial Dome Osteotomy With Ilizarov Fixation in Correction of Ankle Deformity Resulting From Malunited Ankle Fusion

Background: Distal tibial osteotomy is used in the treatment of ankle deformities. Many methods of fixation of this osteotomy were described, including plates, pins, and ilizarov. Dome osteotomy is a cylindrical osteotomy with no bone loss, with the axis of bone is rotated around the center of the circle. We conducted a case series of treatment of ankle deformity due to malunited ankle fusion with distal tibial dome osteotomy. Methods: Eight patients with a history of poliomyelitis with ankle deformity due to a malunited ankle fusion underwent distal tibial dome osteotomy with ilizarov fixation for deformity correction. Postoperative follow up was done up to 12 months postoperatively. We intended to follow up the union of the osteotomy, the axis of the limb, the external clinical appearance, and patient satisfaction. Results: Deformity correction was achieved in all patients regarding the clinical alignment, with no apparent clinical residual deformity in coronal, sagittal plane, or rotational deformity, the limb was cosmetically straight with a plantigrade foot satisfactory to the patients with improving quality of gait. The osteotomy fully united in all patients in a period of 8 to 11 weeks with an average of 9.3 weeks, after which frame was removed. No patient had nonunion or delayed union of the osteotomy. Three patients had pin tract infection during the period of the fixator which was treated by local dressings and antibiotics. Conclusion: Distal tibial focal dome osteotomy fixed by ilizarov is an effective treatment option in malunited ankle fusion deformities.

DOES THE ADDITION OF CT IMPROVE THE ACCURACY OF DETERMINATION OF IMPLANT FIXATION STATUS FOR PERIPROSTHETIC FRACTURES OF THE PROXIMAL FEMUR?

When treating periprosthetic femur fractures (PPFFs) around total hip arthroplasty (THA)], determining implant fixation status preoperatively is important, since this guides treatment regarding ORIF versus revision. The purpose of this study was to determine the accuracy of preoperative implant fixation status determination utilizing plain films and CT scans.Twenty-four patients who underwent surgery for Vancouver B type PPFF were included in the study. Two joint surgeons and two traumatologists reviewed plain films alone and made a judgment on fixation status. They then reviewed CT scans and fixation status was reassessed. Concordance and discordance were recorded. Interobserver reliability was assessed using Kendall's W and intraobserver reliability was assessed using Cohen's Kappa. Ultimately, the “correct” response was determined by intraoperative findings, as we routinely test the component intraoperatively.Fifteen implants were found to be well-fixed (63%) and 9 were loose. Plain radiographs alone predicted correct fixation status in 53% of cases. When adding the CT data, the correct prediction only improved to 55%. Interestingly, concordance between plain radiographs and CT was noted in 82%. In concordant cases, the fixation status was found to be correct in 55% of cases. Of the 18% of cases with discordance, plain films were correct in 43% of cases, and the CT was correct in 57%. Interobserver reliability demonstrated poor agreement on plain films and moderate agreement on CT. Intraobserver reliability demonstrated moderate agreement on both plain films and CT.The ability to determine fixation status for proximal PPFFs around uncemented femoral components remains challenging. The addition of routine CT scanning did not significantly improve accuracy. We recommend careful intraoperative testing of femoral component fixation with surgical dislocation if necessary, and the surgeon should be prepared to revise or fix the fracture based on those findings.

Minimally Invasive Plate Osteosynthesis (MIPO) of Comminuted Radial Fractures Using a Locking Plate Contoured on a 3D-Printed Model of the Feline Antebrachium: A Cadaveric Study.

(1) Background: Due to the unique structural and functional characteristics of the forelimb in cats, fractures of the radius and ulna are best repaired using internal fixation and stabilization in accordance with AO principles. This study presents the results of reduction of 42 cadaveric comminuted feline radial fractures reduced by minimally invasive plate osteosynthesis (MIPO). (2) Methods: Radius fractures were created on 21 pairs of forelimbs with intact bones. MIPO was then performed using two locking bone plates pre-contoured on 3D-printed bone models of the antebrachium of a male and a female cat. Pre- and postoperative radiographs were taken, and radius length and anatomical lateral distal radial angle (aLDRA) were measured. (3) Results: All fractures were classified as complex diaphyseal fractures of the radius. The radial bone length did not change significantly after surgery (F1,18 = 0.01, p = 0.933). However, the aLDRA was modified after surgery (F1,18 = 7.51, p = 0.013), but this change was only observed in females, in whom the aLDRA was significantly reduced (p = 0.035) compared to the value determined by the shape of the plate. In males, the pre- and postoperative aLDRA values were similar (p = 0.824). In 40 cases, alignment, adjacency of bone fragments, and apparatus were judged to be satisfactory. In two cases, the plate was fixed to the proximal radius and distal ulna due to misidentification of the distal radius. In both cases, revision surgery and correct fixation of the radius gave proper alignment, adjacency, and apparatus. (4) Conclusion: A pre-contoured plate on a 3D-printed model of the male and female domestic cat antebrachium was suitable for the reduction and stabilization of comminuted radial fractures in a cohort of domestic cat cadavers without the need to print individual antebrachial bone models for each patient.

MIDFOOT CHARCOT ARTHROPATHY: BUTT FRAME CORRECTION FOLLOWED BY BEAMING FOR SEVERE DEFORMITY

IntroductionCharcot neuroarthropathy is a limb threatening condition and the optimal surgical strategy for limb salvage in gross foot deformity remains unclear. We present our experience of using fine wire frames to correct severe midfoot deformity, followed by internal beaming to maintain the correction.Materials and MethodsNine patients underwent this treatment between 2020–2023. Initial deformity correction by Ilizarov or hexapod butt frame was followed by internal beaming with a mean follow up of 11 months. A retrospective analysis of radiographs and electronic records was performed. Meary's angle, calcaneal pitch, cuboid height, hindfoot midfoot angle and AP Meary's angle were compared throughout treatment. Complications, length of stay and the number of operations are also described.ResultsMean age was 53 years (range:40–59). Mean frame duration was 3.3 months before conversion to beaming. Prior frame-assisted deformity correction resulted in consistently improved radiological parameters. Varying degrees of subsequent collapse were universal, but 5 patients still regained mobility and a stable, plantargrade, ulcer-free foot. Complications were common, including hardware migration (N=6,66%), breakage (N=2,22%), loosening (N=3,33%), infection (N=4,44%), 1 amputation and an unscheduled reoperation rate of 55%. Mean cumulative length of stay was 42 days.ConclusionsAggressive deformity correction and internal fixation for Charcot arthropathy requires strategic and individualised care plans. Complications are expected for each patient. Patients must understand this is a limb salvage scenario. This management strategy is resource heavy and requires timely interventions at each stage with a well-structured MDT delivering care. The departmental learning points are to be discussed.

Minimally invasive Chevron-Akin (MICA) osteotomies without Akin fixation in hallux valgus correction: a case series with 2-year follow-up.

The minimally invasive Chevron-Akin (MICA) is considered the third generation of minimally invasive hallux valgus (HV) surgery, and its original description included fixation of the Akin osteotomy with a screw. The aim of this study is to evaluate a series of patients undergoing HV correction using the MICA technique without screw fixation of the Akin osteotomy. We retrospectively evaluated 58 consecutive patients who underwent surgical correction for HV between August 2018 and March 2020. A total of 69 feet were evaluated with a minimum follow-up of 2years. Clinical outcomes such as pain (VAS), function (AOFAS), range of movement, criteria personal satisfaction and complications were evaluated. The AOFAS score (mean ± standard deviation) significantly improved from 57.0 ± 8.6 preoperatively to 93.9 ± 8.7 postoperatively (p < .001) with a minimum follow-up of 2years. The VAS score improved from 6.0 ± 1.8 preoperatively to 0.6 ± 1.4 at 2-year follow-up (p < .001), and the hallux valgus angle reduced from 39.7 ± 6.9 to 8.9 ± 9.0 (p < .001). The majority of patients (95.6%) reported the result as excellent or good, and the most common complication was the need to remove the screw (7.2%). The use of MICA without Akin osteotomy fixation resulted in successful correction of hallux valgus with improvements in clinical and radiographic parameters. IV, case series.

Non-traumatic complete cervical spine dislocation with severe fixed kyphosis: successful multidisciplinary approach to a challenging case

BackgroundTo our knowledge, there is no previous report in the literature of non-traumatic neglected complete cervical spine dislocation characterized by anterior spondyloptosis of C4, extreme head drop, and irreducible cervicothoracic kyphosis.Case presentationWe report the case of a 33-year-old Caucasian man with a 17-year history of severe immune polymyositis and regular physiotherapy who presented with severe non-reducible kyphosis of the cervicothoracic junction and progressive tetraparesia for several weeks after a physiotherapy session. Radiographs, computed tomography, and magnetic resonance imaging revealed a complete dislocation at the C4–C5 level, with C4 spondyloptosis, kyphotic angulation, spinal cord compression, and severe myelopathy. Due to recent worsening of neurological symptoms, an invasive treatment strategy was indicated. The patient’s neurological status and spinal deformity greatly complicated the anesthetic and surgical management, which was planned after extensive multidisciplinary discussion and relied on close collaboration between the orthopedic surgeon and the anesthetist. Regarding anesthesia, difficult airway access was expected due to severe cervical angulation, limited mouth opening, and thyromental distance, with high risk of difficult ventilation and intubation. Patient management was further complicated by a theoretical risk of neurogenic shock, motor and sensory deterioration, instability due to position changes during surgery, and postoperative respiratory failure. Regarding surgery, a multistage approach was carefully planned. After a failed attempt at closed reduction, a three-stage surgical procedure was performed to reduce displacement and stabilize the spine, resulting in correct spinal realignment and fixation. Progressive complete neurological recovery was observed.ConclusionThis case illustrates the successful management of a critical situation based on a multidisciplinary collaboration involving radiologists, anesthesiologists, and spine surgeons.

Fusion mass to pelvis internal distraction technique using multiple-hook fixation for scoliosis correction: illustrative case.

Internal distraction rods have been described as an alternative to halo gravity traction for the treatment of severe scoliosis. Distraction rods can be challenging to use in patients with existing fusion masses. The authors report an internal distraction, construct-to-construct rod technique using multiple-hook fixation in a patient with a sharply angulated cervicothoracic scoliosis fusion mass. A 12-year-old female with previously diagnosed congenital scoliosis who had undergone cervical fusion in situ at age 2 presented to the clinic with shortness of breath exacerbated by increased levels of activity. Standing anteroposterior and lateral scoliosis radiographs revealed a left >150° cervicothoracic curve, right 140° thoracolumbar curve, and left 28° lumbosacral fractional curve with pelvic obliquity. The authors indicated this patient for a 3-stage all-posterior approach for spinal fusion and deformity correction. In the final fusion surgery, the authors set up a construct-to-construct internal distraction configuration connecting the left hemipelvis to the cervicothoracic fusion mass to aid in deformity correction. A construct-to-construct internal distraction rod technique connecting a fusion mass to the pelvis can assist with curve correction in severe scoliosis.

Deap-seated infection and nonunion following internal fixation for Charcot foot deformity correction. A proportional meta-analysis of level 4 evidence

BackgroundGiven the paucity of literature on the management of infected metalwork and nonunion in neuropathic diabetic patients, a meta-analysis was designed to investigate the two major complications following Charcot reconstruction performed by means of internal fixation methods. MethodsWe searched PubMed, Scopus and CENTRAL until the 17th of May 2022 for completed studies investigating outcomes following midfoot and/or hindfoot and/or ankle diabetic Charcot reconstruction. For a paper to qualify for inclusion, an internal fixation element should have been considered. Random effects meta-analysis of proportion was performed to calculate the rate of post-operative deep-seated infections with the associated amputation rate and nonunions by using Open Meta-analyst software. Sub-analysis linked to anatomical location of reconstruction was performed and the quality of the included studies was appraised using the Moga tool. ResultsThirty studies with 492 eligible reconstructions were considered. Of those, deep-seated infections were diagnosed in 46 cases (Estimated proportion was 6.7%, 95% CI [4.2%–9.2%]). Debridement and antibiotic administration with or without metalwork removal were considered in the majority of the participants with successful clinical outcomes. Amputation was performed in 15 patients due to unmanageable post-operative infection and nonunion was reported in 17 studies (Estimated rates were 36.6%, 95% CI [18.4%–56.3%]; and 11.9%, 95%CI [6.6%–18.1%]; respectively). ConclusionsMeta-analysis showed that although the overall risk of infection development is less than 10%, just below one third of the infected cases undergo late amputation. Moreover, internal fixation reconstructions carry a nonunion risk of just above 10%.

Short-Term Risk Factors for Distal Junctional Kyphosis after Spinal Reconstruction Surgery in Patients with Osteoporotic Vertebrae.

Level 3 retrospective cohort case-control study. This study aimed to investigate the risk factors for distal junctional kyphosis (DJK) caused by osteoporotic vertebral fractures following spinal reconstruction surgery, with a focus on the sagittal stable vertebra. Despite the rarity of reports on DJK in this setting, DJK was reported to reduce when the lower instrumented vertebra (LIV) was extended to the sagittal stable vertebra in the posterior corrective fixation for Scheuermann's disease. This study included 46 patients who underwent spinal reconstruction surgery for thoracolumbar osteoporotic vertebral fractures and kyphosis and were followed up for 1 year postoperatively. DJK was defined as an advanced kyphosis angle >10° between the LIV and one lower vertebra. The patients were divided into groups with and without DJK. The risk factors of the two groups, such as patient background, surgery-related factors, radiographic parameters, and clinical outcomes, were analyzed. The DJK and non-DJK groups included 14 and 32 patients, respectively, without significant differences in patient background. Those with instability in the distal adjacent LIV disc had a significantly higher risk of DJK occurrence (28.6% vs. 3.2%, p=0.027). DJK occurrence significantly increased in those with the sagittal stable vertebra not included in the fixation range (57.1% vs. 18.8%, p=0.020). Other preoperative radiographic parameters were not significantly different. Instability in the distal adjacent LIV disc (adjusted odds ratio, 14.50; p=0.029) and the exclusion of the sagittal stable vertebra from the fixation range (adjusted odds ratio, 5.29; p=0.020) were significant risk factors for DJK occurrence. Regarding spinal reconstruction surgery in patients with osteoporotic vertebral fractures, instability in the distal adjacent LIV disc and the exclusion of the sagittal stable vertebra from the fixation range were risk factors for DJK occurrence in the short term.

The application of gradually expanding pedicle technology in the placement of screws in thinner pedicle of patients with idiopathic scoliosis.

To propose a technique of gradual expansion of pedicle diameter to place screws on the thinner pedicle that is difficult to place screws in scoliosis orthopedic surgery, in order to place thicker pedicle screws in the premise of good safety to achieve good stability and orthopaedic effect. The authors reviewed that 36 patients with Adolescent idiopathic scoliosis (AIS) (20 females, 16 males) in our department from June 2020 to March 2024 underwent posterior spinal correction and internal fixation were enrolled in the present study. 194 pedicles had narrower diameter ranging from 0 mm to 4.5 mm. After analysis, 155 pedicles (internal diameter: 2.5 mm-4.5 mm) were treated with gradually expanding pedicles technology. The angle between the inserted screws and the upper endplate of the vertebral body was measured 1 week after operation and 3 months after operation to evaluate the placement of the screws after pedicle expansion. All operations were completed without dura mater rupture, nerve root injury, infection and poor incision healing. There was no screw breaking or screw pull-out in DR film at 3 months after operation compared with 1 week after operation. There was no significant difference in the angle between screw and upper endplate measured by the three observers at 3 months and 1 week after operation (Wilcoxon's signed rank test, p > 0.05). In the measurement at 1 week or 3 months after operation, there was no statistically significant difference among the three observers. There is a good consistency between the observers (Cronbach's alpha > 0.80). In AIS patients, the thinner pedicle with a diameter range of 2.5 mm to 4.5 mm can be safely inserted with relatively thicker pedicle screws after gradually expanding pedicle technology.

Comparison of skeletal stability with rigid and wire fixation in patients who have undergone Le Fort I and Anterior Segmental Maxillary Osteotomy

ABSTRACT Background: Maxillary superior repositioning is widely regarded as the most stable procedure in orthognathic surgery, requiring minimal instruments for stabilization. Rigid fixation is considered the ideal method for long-term stability, leading to improved anatomic structures, enhanced recovery of bite forces, and better bite function. Objective: To compare the skeletal stability following Le Fort I and anterior maxillary osteotomy with wire osteosynthesis and rigid fixation. Materials and Methods: A total of 16 patients, including one male and 15 females, underwent Le Fort I and anterior segmental maxillary osteotomy along with fixation using either wire osteosynthesis or rigid fixation for correction of vertical and anteroposterior maxillary excess. Patients were assessed at preoperative, 1-week postoperative, and 6-month postoperative stages using a lateral cephalogram to evaluate skeletal stability. Results: The wire osteosynthesis group showed significant differences in posterior maxillary vertical measurements compared to the rigid fixation group. However, there was no significant difference in anterior vertical and anteroposterior skeletal measurements between the two groups. Conclusion: Wire osteosynthesis is a stable form of fixation for superior repositioning with segmentation of the maxilla for correction of vertical and antero-posterior excess.

Comparison of Motion Grading in 1,000 Patients by First- and Second-Generation HR-pQCT: A Propensity Score Matched Cohort Study

In-vivo bone microstructure measured by high-resolution peripheral quantitative computed tomography (HR-pQCT) is gaining importance in research and clinical practice. Second-generation HR-pQCT (XCT2) shows improved image quality and shorter measurement duration compared to the first generation (XCT1). Predicting and understanding the occurrence of motion artifacts is crucial for clinical practice. We retrospectively analyzed data from HR-pQCT measurements at the distal radius and tibia of 1,000 patients (aged 20 to 89) evenly distributed between both generations of HR-pQCT. Motion artifacts were graded between 1 (no motion) and 5 (severe motion), with grades greater 3 considered unusable. Additionally, baseline characteristics and patients’ muscle performance and balance were measured. Various group comparisons between the two generations of HR-pQCT and regression analyses between patient characteristics and motion grading were performed. The study groups of XCT1 and XCT2 did not differ by age (XCT1: 64.9 vs. XCT2: 63.8 years, p = 0.136), sex (both 74.5% females, p > 0.999), or BMI (both 24.2 kg/m2, p = 0.911) after propensity score matching. XCT2 scans exhibited significantly lower motion grading in both extremities compared to XCT1 (Radius: p < 0.001; Tibia: p = 0.002). In XCT2 motion-corrupted scans were more than halved at the radius (XCT1: 35.3% vs. XCT2: 15.5%, p < 0.001), and at the tibia the frequency of best image quality scans was increased (XCT1: 50.2% vs. XCT2: 63.7%, p < 0.001). The strongest independent predictor for motion-corrupted images is the occurrence of high motion grading at the other scanning site during the same consultation. The association between high motion grading in one scan and a corresponding high motion grading in another scan within the same session suggests a non-resting patient. Additionally, aged, female, and patients with smaller stature tend towards higher motion grading, requiring special attention to a correct extremity fixation.

Wedgeless V-Shaped Osteotomy of the Distal Medial Femur with Locking Plate Fixation for Correction of Genu Valgum in Adolescents and Young Adults.

Genu valgum is a common disorder affecting adolescents and young adults. Treatment of this disorder requires restoration of normal mechanical axis alignment and joint orientation, for which it is important to assess whether the deformity arises from the distal femur, knee joint, or proximal tibia. Most commonly, the deformity originates from the distal femur, and various osteotomies of the distal femur have been described1-6. The presently described wedgeless V-shaped osteotomy7,8 is a good option among the various alternative procedures listed below. The anesthetized patient is placed in the supine position on a radiolucent operating table. A bolster is placed beneath the knee to relax the posterior structures. A medial longitudinal skin incision is made that extends from the level of the medial joint line to 5 cm proximal to the adductor tubercle. The vastus medialis is identified and elevated anteriorly by detaching it from its distal and posterior aspects. The leash of vessels underneath the vastus medialis is identified, and the apex of the V-shaped osteotomy is kept just proximal to it. The anterior arm of the V is kept longer than the posterior one, both of them are kept perpendicular to each other, and the apex of the V is made to point distally. The osteotomy is performed on the medial cortex with use of an oscillating saw or multiple drill holes that are then connected using a thin osteotome. Care is taken not to utilize a saw or drill on the lateral cortex. A gentle valgus thrust is applied to break the lateral cortex without periosteal disruption. The apex of the V osteotomy on the proximal fragment is trimmed, and the deformity is corrected with varus force. The osteotomy site is stabilized with use of an anatomically contoured distal medial femoral locking plate or a medial proximal tibial L-shaped buttress plate (of the contralateral side). The implant position is verified under a C-arm image intensifier. The wound is closed in layers over a suction drain in a standard manner. Various types of corrective osteotomies of the distal femur have been described in the literature, including the lateral opening wedge, medial closing wedge, dome, and spike osteotomies1-6. All of these procedures have certain limitations and shortcomings. The wedgeless V-shaped osteotomy is another described procedure that is inherently stable7,8. It is a safe procedure and yields good clinical outcomes8,9. The posterior arm of the V-shaped osteotomy is kept smaller than the anterior arm. The proximal cortical bone is allowed to dig into the cancellous bone of the wider distal metaphysis during deformity correction. Trimming the apex of proximal bone end after making the osteotomy facilitates the process. In a study of 46 patients with a mean age of 16.9 years (range, 15 years to 23 years), Gupta et al.8 reported that the mean radiographic tibiofemoral angle improved from 22.2° (range, 16° to 29°) preoperatively to 5.1° (range, 0° to 10°) postoperatively (p < 0.001). Similarly, the mean lateral distal femoral angle improved from 79.2° preoperatively to 89.1° postoperatively (p < 0.001) and the mean mechanical axis deviation improved from 19.6 mm preoperatively to 3.7 mm postoperatively (p < 0.001). A total of 44 of 46 cases had an excellent functional outcome, with the other 2 having good outcomes. None of the patients in the study had an unsatisfactory outcome. It is important to keep the whole lower limb accessible to the image intensifier intraoperatively.Identification of the leash of vessels underneath the vastus medialis is important to decide the level of the osteotomy.It is important to preserve the periosteal sleeve on the lateral aspect of the femur. CORA = center of rotation of angulationECG = electrocardiogramLDFA = lateral distal femoral angleMAD = mechanical axis deviationMPTA = medial proximal tibial angle.

Kappa: Preliminary Results on a Novel Technique for Pelvic Fixation in Adult Spinal Deformity Correction.

Retrospective cohort study. Pelvic fixation in degenerative spinal deformation is as crucial as demanding. Several pelvic anchoring technics have been described, but loosening rates remain high for most solutions. Here is described the "Kappa" technic, combining ilio-sacral screws to S2A1 screws at 2years of follow-up. Thirteen patients that underwent a spinal deformity correction with "Kappa" fixation to the pelvis and with more than 2years of follow-up were prospectively included in this study. The surgical technic is described, and clinical and radiographic data have been collected for all patients. The population exhibited an important pre-operative sagittal imbalance (mean SVA of 104,4mm, mean PI-LL mismatch of 22,8°) that had improved significatively after surgery (mean SVA of 75,5mm and mean PI-LL mismatch of 4,9°). No loosening of pull-out of the implants was to deplore at 2years of follow-up. The association of ilio-sacral screw, resistant to pull-out because of the traction axis perpendicular to the construct, to S2A1 screws, known to be effective in sagittal balance restoration seems to be an effective and safe option to pelvic fixation for adult spinal deformity correction. IV.

The importance of a structured failure analysis in revision acromioclavicular joint surgery: A multi-rater agreement on the causes of stabilization failure from the ISAKOS shoulder committee

BackgroundAcromioclavicular joint (ACJ) stabilizations are associated with a high overall failure rate with 9.5% of these patients requiring subsequent revision surgery. Consequently, understanding the specific cause of primary ACJ stabilization failure is paramount to improving surgical decision-making in this challenging patient cohort. PurposeTo (1) identify risk factors and mechanisms for failure following primary arthroscopically-assisted ACJ stabilization to highlight the importance of conducting a detailed failure analysis and to (2) establish revision strategies based on real-life cases of primary failed ACJ stabilization. Study designLevel of evidence IV. MethodsA survey was shared internationally among members of the International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine (ISAKOS) shoulder committee. The survey contained failure analysis of 11 real-life cases of failed primary arthroscopically-assisted ACJ stabilization. For each case, a thorough patient history, standardized radiographs, and CT scans were provided. Participants were asked to give their opinion on bone tunnel placement, cause of failure (biological, technical, traumatic, or combined), the stabilization technique used, as well as give a recommendation for revision. ResultsSeventeen members of the ISAKOS shoulder committee completed the survey. Biological failure was considered the most common cause of failure (47.1%), followed by technical (35.3%) and traumatic (17.6%) failure. The majority deemed two modifiable factors (i.e., patient's profession and sport) as well as non-modifiable factors (i.e., patient's age and time from trauma to initial surgery) to be risk factors for failure. In 10 of 11 cases, the correct fixation device was used in the primary setting (90.9%; 52.8–82.4% agreement); however, in eight of those cases, the technique was not performed correctly (80.0%; 58.8–100% agreement). In 8 of all 11 cases, the majority recommended an arthroscopically assisted technique with graft augmentation for revision (52.9–58.8% agreement). ConclusionBiological failure and technical failure are the most common reason for failure in primary ACJ stabilization followed by traumatic failure. Besides, biological failure can be triggered by technical errors such as clavicular or coracoidal tunnel misplacement. Consequently, a detailed failure analysis including preoperative CT should be conducted on the causes of primary ACJ failure, and, if possible, an arthroscopically-assisted technique with graft augmentation should be prioritized in revision ACJ surgery. Clinical relevanceACJ stabilizations are associated with a high overall failure rate - potentially due to biological and technical properties. When encountering failed arthroscopically-assisted ACJ stabilization, a detailed failure analysis should be conducted on the causes of primary ACJ failure. Furthermore, an arthroscopically-assisted revision stabilization is feasible in most cases.

Design of Composite Parallel External Fixator for Multisegment Foot and Ankle Deformity Correction: A Correction Requirement- Dominated Approach

Foot and ankle deformity is a common complaint in orthopedic surgery, among which the multisegment concurrent types are even more severe. As a key medical device for multisegment deformity correction, the composite parallel external fixator (PEF) design has a profound impact on the correction outcomes. However, existing PEFs share a single configuration and have inadequate adaptation to various deformity types, leading to problems, such as complex structural composition, excessive adjustment parameters, and uncomfortable wearing experience. To overcome these problems, this article proposes a novel correction requirement-dominated design approach for composite PEF. Multisite frame mounting modes and multitype struts are introduced to form required PEF configurations. Lower mobility struts can constrain the unwanted degrees-of-freedom, thus enabling the device to precisely match the requirement-function relationship. Taking the double-segment deformity as research object, clinical cases, and composite PEF assembly simulations are provided. Experiments are carried out on the mechanical prototype. The mounting test proves the interconverting ability and deformity-targeting property of the derived composite PEFs. Moreover, the motion test verifies that the device can distract patients of different weights to complete the correction path, and the stability test demonstrates that the device can resist external bumps, thus indicating the feasibility of the approach.