Correct Error Research Articles

Multi‐timescale optimal scheduling of microgrids for generating new energy output scenarios based on correction error sampling intervals

AbstractMicrogrid can realize energy saving and emission reduction and multi‐energy complementation, but the fluctuation of renewable energy output and the error of day‐ahead scheduling will threaten the stability of microgrid operation. For this reason, this article proposes a microgrid multi‐timescale optimal scheduling method based on new energy output scenario generation. First, the microgrid framework of this article is introduced, and an energy cycle emission reduction model taking into account electricity‐to‐gas conversion is designed; second, a new energy prediction error model is established based on the prediction box and Gaussian hybrid model, and the scenario of wind and photovoltaic power generation is generated by correcting the sampling intervals for error sampling; and then, based on the day‐ahead scheduling plan, an intraday cooling, heating and electricity two‐layer rolling optimization model is established to correct the day‐ahead scenario. Finally, the example analysis shows that the cyclic emission reduction model can realize the recycling of resources, reduce the fuel cost and carbon emission, and the generation of scenarios for wind power can smooth out the fluctuation of new energy power, which, together with the intra‐day two‐layer rolling optimization, can reduce the day‐ahead scheduling error and improve the stability of microgrid operation.

Diagnosis of schizophrenia by integrated saccade scores and associations with psychiatric symptoms, and functioning.

Eye movement as a neurobiological biomarker of schizophrenia. We aim to estimate diagnostic accuracy of integrated pro/antisaccade eye movement measurements to discriminate between healthy individuals and schizophrenic patients. We compared the eye movement performance of 85 healthy individuals and 116 schizophrenia-stable patients during prosaccade and antisaccade tasks. The difference eye movement measurements were accumulated by stepwise discriminant analysis to produce an integrated score. Finally, the diagnostic value of the integrated score was calculated by the receiver operating characteristic (ROC) area under the curve (AUC), and the best sensitivity and specificity were calculated based on the given cutoff values. Using discriminant analysis, an integrated score included the residual gain and latency (step) during the prosaccade test, the error rate, and the corrected error rate during the antisaccade test. We found that the integrated score could well classify schizophrenia patients and healthy individuals with an accuracy of 80.6%. In the ROC, Youden's index was 0.634 (sensitivity = 81.0%, specificity = 82.4%) and AUC was 0.871. There were significant difference patterns of correlation between the severity of psychiatric symptoms and daily functioning and diagnostic eye movement measurements. Using only 2 saccade tasks to discriminate well between schizophrenia patients and healthy controls, suggesting that abnormalities in saccade behavior is a potential biomarker and efficient diagnostic tool for identifying schizophrenia. The underlying neuropathologic mechanisms associated with abnormal saccades may provide insights into the intervention and diagnosis of schizophrenia.

Surgical correction of pes varus deformity in dachshunds using three-dimensional-printed patient-specific guide system: nine tibiae in seven cases (2018-2022).

To describe the use of a three-dimensional-printed patient-specific guide system for the treatment of distal tibial varus deformity in Dachshunds and retrospectively report the clinical and radiographic outcome. Pes varus deformity in nine limbs of seven dachshunds was treated with corrective osteotomy using a three-dimensional-printed patient-specific guide system. Data from computed tomography were processed to obtain virtual 3D-models of the tibias, which were used for computer-aided design-based surgical planning, three-dimensional-printed patient-specific guide system design and evaluation of planned versus achieved tibial correction. Clinical outcomes were evaluated by lameness score and post-operative owner-reported questionnaire at a minimum of 15 months. The gait abnormality resolved in all limbs. The osteotomy healed uneventfully in eight tibiae. Implant failure occurred in one tibia but was successfully revised. There was good correlation between planned and achieved deformity correction, with mean translational error <1 mm in all planes, and mean angulation correction error <2° in all planes. A 3D-printed patient-specific osteotomy and reduction guide system facilitates the accurate correction of tibial pes varus deformity with very good clinical outcomes. Opening osteotomy, stabilised with orthogonal locking plates and without the application of bone graft led to satisfactory bone healing in all cases.

Femtosecond laser assisted cataract surgery in a cataract patient with low vaulted ICL following LASIK: a case report

BackgroundApart from the conventional utilization of ICL implantation for the correction of refractive errors, its recent applications extend to correcting refractive errors post laser refractive surgery. Notably, the development of cataracts stands out as a prevalent postoperative complication, often associated with low vault. Previous cases have demonstrated successful management of cataracts with ICL through the combination of FLACS and ICL removal coupled with IOL implantation, resulting in favorable postoperative visual outcomes. Herein, we present a case of cataract with low vault ICL following LASIK and its subsequent management.Case presentationA 46-year-old male presented with vision loss in the right eye for 9 months, and he had undergone LASIK 22 years prior and had ICL implantation in both eyes 2 years ago to correct refractive error. One day after ICL implantation, both eyes exhibited the UDVA of 1.2 and 1.0, well-positioned ICLs, and approximate vault of 150 μm and 200 μm. Six months ago, the patient became aware of blurred vision in the right eye for a duration of 3 months. Examination revealed cloudy lens cortex in the right eye. During the current review, the UDVA of the right eye was 0.6, where nasal wedge-shaped clouding was evident and worsened, while the left eye lens remained transparent. AS-OCT demonstrated the vault of 54 μm in the right eye and 83 μm in the left eye. Considering the patient’s history of LASIK and the presence of right eye cataract, a monovision approach was adopted. The patient underwent FLACS combined with ICL extraction and monofocal IOL lens implantation in the right eye. At 10 days postoperatively, the patient exhibited the UDVA of 1.0.ConclusionsOur report confirms the feasibility of FLACS in managing cataracts in patients with low vault ICL following LASIK. This procedure does not pose significantly greater challenges than in typical cataract cases, although meticulous care remains essential throughout every step of the surgery, particularly during laser scanning and positioning. With adequate preoperative preparation and precise calculation of the IOL power, surgical outcomes can meet expectations fully.

Adjusted planning based on the joint line convergence angle improves correction accuracy in the standing position after opening wedge high tibial osteotomy

BackgroundPostoperative change of the joint line convergence angle (JLCA) is known to be a factor affecting correction error in opening wedge high tibial osteotomy (OWHTO). The purpose of this study was to assess whether preoperative planning that considers change of the JLCA can achieve accurate correction in the standing position after OWHTO.MethodsOWHTO was performed for 109 knees with osteoarthritis of the knee. The amount of angular correction was planned aiming to achieve mechanical valgus of 5° in 55 knees (conventional planning), and it was adjusted in 54 knees (adjusted planning) according to the preoperative JLCA as follows: not changed with JLCA ≤ 3°; decreased 1° with JLCA 4–6°; decreased 2° with JLCA 7–8°; and decreased 3° with JLCA ≥ 9°. The hip-knee-ankle (HKA) angle, JLCA, and medial proximal tibial angle (MPTA) were measured on standing long-leg radiographs. Correction error ≤ 2º was defined as the acceptable range, and correction error > 2º was defined as an outlier.ResultsThe conventional planning group had a significantly greater postoperative HKA angle than the adjusted planning group (6.1º and 4.9º, respectively). The mean JLCA decreased from 4.8º to 2.6º in the conventional planning group and from 4.6º to 2.7º in the adjusted planning group. The conventional planning group had significantly greater postoperative MPTA than the adjusted planning group (96.2º and 94.7º, respectively). The rate of outliers with correction error > 2º was significantly lower in the adjusted planning group (9%) than in the conventional planning group (24%). The rate of the MPTA > 95º was significantly lower in the adjusted planning group (30%) than in the conventional planning group (69%).ConclusionsThis study demonstrated that preoperative planning with adjustment of the correction angle according to the preoperative JLCA improved correction accuracy in the standing position after OWHTO.

Optical Characterization of Coastal Waters with Atmospheric Correction Errors: Insights from SGLI and AERONET-OC

This study identifies the characteristics of water regions with negative normalized water-leaving radiance (nLw(λ)) values in the satellite observations of the Second-generation Global Imager (SGLI) sensor aboard the Global Change Observation Mission–Climate (GCOM-C) satellite. SGLI Level-2 data, along with atmospheric and in-water optical properties measured by the sun photometers in the AErosol RObotic NETwork-Ocean Color (AERONET-OC) from 26 sites globally, are utilized in this study. The focus is particularly on Tokyo Bay and the Ariake Sea, semi-enclosed water regions in Japan where previous research has pointed out the occurrence of negative nLw(λ) values due to atmospheric correction with SGLI. The study examines the temporal changes in atmospheric and in-water optical properties in these two regions, and identifies the characteristics of regions prone to negative nLw(λ) values due to atmospheric correction by comparing the optical properties of these regions with those of 24 other AERONET-OC sites. The time series results of nLw(λ) and the single-scattering albedo (ω(λ)) obtained by the sun photometers at the two sites in Tokyo Bay and Ariake Sea, along with SGLI nLw(λ), indicate the occurrence of negative values in SGLI nLw(λ) in blue band regions, which are mainly attributed to the inflow of absorptive aerosols. However, these negative values are not entirely explained by ω(λ) at 443 nm alone. Additionally, a comparison of in situ nLw(λ) measurements in Tokyo Bay and the Ariake Sea with nLw(λ) values obtained from 24 other AERONET-OC sites, as well as the inherent optical properties (IOPs) estimated through the Quasi-Analytical Algorithm version 5 (QAA_v5), identified five sites—Gulf of Riga, Long Island Sound, Lake Vanern, the Tokyo Bay, and Ariake Sea—as regions where negative nLw(λ) values are more likely to occur. These regions also tend to have lower nLw(λ) values at shorter wavelengths. Furthermore, relatively high light absorption by phytoplankton and colored dissolved organic matter, plus non-algal particles, was confirmed in these regions. This occurs because atmospheric correction processing excessively subtracts aerosol light scattering due to the influence of aerosol absorption, increasing the probability of the occurrence of negative nLw(λ) values. Based on the analysis of atmospheric and in-water optical measurements derived from AERONET-OC in this study, it was found that negative nLw(λ) values due to atmospheric correction are more likely to occur in water regions characterized by both the presence of absorptive aerosols in the atmosphere and high light absorption by in-water substances.

On the Consistency of Stochastic Noise Properties and Velocity Estimations from Different Analysis Strategies and Centers with Environmental Loading and CME Corrections

The analysis of the Global NFavigation Satellite System (GNSS) time series provides valuable information for geodesy and geodynamics researcFh. Precise data analysis strategies are crucial for accurately obtaining the linear velocity of GNSS stations, enabling high-precision applications of GNSS time series. This study investigates the impact of different stochastic noise models on velocity estimations derived from GNSS time series, specifically under conditions of environmental loading correction and common mode error (CME) removal. By comparing data from various data centers, we find that post-correction, different analysis strategies exhibit high consistency in their noise characteristics and velocity estimation results. Across various analysis strategies, the optimal noise models were predominantly Power Law with White Noise (PLWN) and Fractional Noise with White Noise (FNWN), with the optimal noise models including COMB/JPL, COMB/SOPAC, and COMB/NGL for approximately 50% of the datasets. Most of the stations (approximately 80%) showed velocity differences below 0.3 mm/year and velocity estimation uncertainties below 0.1 mm/year. Nonetheless, variations in amplitudes and periodic signals persisted due to differences in the processing of raw GNSS observations. For instance, the NGL and JPL datasets, which were processed using GipsyX 2.1 software, showed higher amplitudes of the 5.5-day periodic signal. These findings provide a solid empirical foundation for advancing data analysis methods and enhancing the reliability of GNSS time series results in future research.

A Method by using predefined windows to improve the InSAR atmospheric correction model based on GNSS ZTD and its horizontal delay gradient

ABSTRACT Correcting the signal delay caused by electromagnetic waves passing through the atmosphere is crucial in InSAR. Atmospheric delays are significant enough to obscure the true deformation signal, making it difficult for InSAR to detect deformation signals at the millimetre scale. Therefore, it is imperative to mitigate atmospheric interference appropriately. To interpolate sparse GNSS networks and capture small-scale atmospheric delays, this study presents an enhanced method for constructing an atmospheric correction model based on GNSS Zenith Total Delay (ZTD) and its horizontal gradient, which is integrated within a predefined window. To validate the effectiveness of the improved model, we applied it to 27 InSAR short-time and short-spatial baseline unwrapped interferograms. These interferograms are composed of images observed by the Sentinel-1A satellite from January to December 2022 in Southern California. The corrective impact of the enhanced model is also compared against that of the initial inversion model and GACOS to confirm the viability of the approach. Results of the evaluation, considering root mean square error (RMSE), standard deviation (STD), and the correlation between phase and elevation, indicate that our enhanced method reduces correction errors by 35.10%, 20.05%, and 63.52%, respectively, compared to GACOS. Compared to the initial model, these reductions are 58.19%, 57.23%, and 4.34%, respectively. By integrating the outcomes from all three evaluation methods and analysing the corrected images, our enhanced model effectively resolves the inconsistency in correction effects resulting from the spatial variability of atmospheric delay. Moreover, incorporating the horizontal gradient in the inversion method has proven effective in capturing small-scale atmospheric delay signals. This highlights the feasibility and benefits of our enhanced model.

The History and Impact of Prescribing Orthokeratology for Slowing Myopia Progression.

This paper discusses the history and impact of orthokeratology on slowing the progression of myopia. It discusses the origins and evolution of orthokeratology from polymethymethaccrylate lenses worn during the day to its current prescribing of highly permeable, innovative reverse-geometry designs worn only while sleeping. Technological advances in corneal topography, lens design, lens materials, and manufacturing have facilitated growth of orthokeratology to a precise and predictable procedure. More recently, significant interest in orthokeratology has been stimulated by its efficacy in slowing axial elongation in myopic children. Safety of children wearing contact lenses while sleeping has been an ongoing concern. The potential of serious complications exists, but long-term studies and clinical experience have shown that risks of those events can be minimized with strict compliance with lens cleaning, disinfection, and hand hygiene. Because no correction is required during waking hours, patients using orthokeratology report higher vision-related quality of life, less activity restrictions, and more comfortable eyes compared with spectacles or contact lenses worn during the day. The future growth of orthokeratology will be fueled by the prescribing of orthokeratology as a modality to slow axial elongation and an alternative modality to spectacles, traditional contact lenses, and refractive surgery to correct refractive error.

Comparing the Accuracy of Patient-Specific Guide and Universal Guide for Distal Femoral Osteotomy in Dogs.

To introduce a novel universal guide design for distal femoral osteotomy (DFO) to treat femoral deformities and other hindlimb orthopaedic diseases, and to compare its accuracy to the patient-specific guide in vitro and ex vivo on X-ray and computed tomography (CT). Thirteen anatomic specimens of canine femurs and 13 3D-printed femoral bone models were subjected to DFO using a patient-specific and a universal guide. The anatomical lateral distal femoral angle and anteversion angle were measured on radiographic and CT images before and after surgical procedure and used to compare the accuracy of the surgical guides in treating uniplanar or biplanar deformities. Bone models were used to compare the accuracy with ex vivo models. The mean correction errors were -1.18° to 0.72° on X-ray and -1.91° to 0.53° on CT scan. The analysis showed no statistically significant difference in the mean error between the groups based on type of guide used, nor in the mean error between groups based on whether anteversion correction was performed based on both the CT and X-ray imaging data. Both the patient-specific and universal guides can produce accurate results in DFO surgery, and the universal guide shows potential as a useful surgical tool.

Correction of High Astigmatism by Autologous Astigmatic Lenticule Reshaping and Rotation.

To explore the use of autologous astigmatic lenticule reshaping and rotation surgery to correct high astigmatism in conjunction with excimer laser technology to correct residual refractive error. Six patients with high astigmatism (8 eyes, all with astigmatism from -5.50 to -11.00 diopters [D]) seeking refractive error correction were enrolled. The following methods were used to correct refractive errors that could not be corrected by a single conventional surgery: (1) cutting of a customized lens using FLEx technology, (2) lifting of the corneal flap and reshaping the autologous astigmatic lenticule in situ using an excimer laser, and (3) rotation of the autologous astigmatic lenticule by 90°. Uncorrected distance visual acuity, subjective refraction, corneal topography, and anterior segment optical coherence tomography were performed preoperatively and postoperatively. The efficacy and safety indices at 6 months postoperatively were 0.93 ± 0.18 and 1.06 ± 0.11, respectively, the spherical equivalent remained stable and close to emmetropia (-0.13 ± 0.70 D) from 1 to 6 months postoperatively, postoperative astigmatism was generally mildly undercorrected (-1.22 ± 0.43 D), and the difference in corneal curvatures at 2 mm from the apex of the cornea was significantly reduced compared to preoperatively (P < .05); however, the corresponding values at 1 and 3 mm showed no difference. Correction of high astigmatism with autologous astigmatic lenticule reshaping and rotation surgery is tissue-sparing, predictable, and significantly improves postoperative visual acuity and quality. This method is feasible and safe, with predictability requiring further study. This novel surgical approach has potential for patients with high astigmatism that cannot be corrected by conventional refractive surgery. [J Refract Surg. 2024;40(8):e554-e561.].

Projection tests for regression coefficients in high-dimensional partial linear models

. To check the significance of the regression coefficients in the linear component of high-dimensional partial linear models, we proposed some projection-based test statistics. These test statistics are connected with U-statistics of order two and they are applicable for diverging dimensions and heteroscedastic model errors. By using the martingale central limit theorem, we show the asymptotic normalities of the proposed test statistics under the null hypothesis and local alternative hypotheses. The performance of test statistics are evaluated by simulation studies. The simulation results show that the proposed test statistics are powerful and have the correct type-I error asymptotically under the null hypothesis.

Professional performance of the graduate in optometry and optics in the calculation and adaptation of contact lenses

Introduction: the appearance, evolution and development of contact lenses brought with it a therapeutic method to correct refractive error, treat corneal ectasias and improve the patient s visual quality, thereby improving the profesional performance of the graduate in Optometry and Optics in this area it constitutes an aspect of singular importance within the medical sciences. Objetive: define profesional performance of graduates in Optometry and Optics in the calculation and adaptation of contact lenses. Method: a search was carried out in the Google Academic/ Scholar PUBMED, SciELO Public Health, SciELo Cuba engines. In the search strategy, the terms were used: profesional performance, contact lenses, quality of health services. A bibliographic review of 43 articles related to the topic under investigation was carried out. Results: we work to train a profesional with scientific mastery who responds to social needs, without abandoning the humanistic conception, since contemporary times demand a high leve lof performance, with the purpose of providing better care to patients visual problems. Conclusions: professional performance has been studied from different angles, highlihting the works of different authors, who offer as results of research models, methodologies and strategies as options aimed at the process of improving professional performance in different educations, whichis why it is done it is necessary to highlight the work of the graduate in Optometry and Optics in the calculation and adaptation of contact lenses base don visual health

Correction Compensation and Adaptive Cost Aggregation for Deep Laparoscopic Stereo Matching

Perception of digitized depth is a prerequisite for enabling the intelligence of three-dimensional (3D) laparoscopic systems. In this context, stereo matching of laparoscopic stereoscopic images presents a promising solution. However, the current research in this field still faces challenges. First, the acquisition of accurate depth labels in a laparoscopic environment proves to be a difficult task. Second, errors in the correction of laparoscopic images are prevalent. Finally, laparoscopic image registration suffers from ill-posed regions such as specular highlights and textureless areas. In this paper, we make significant contributions by developing (1) a correction compensation module to overcome correction errors; (2) an adaptive cost aggregation module to improve prediction performance in ill-posed regions; (3) a novel self-supervised stereo matching framework based on these two modules. Specifically, our framework rectifies features and images based on learned pixel offsets, and performs differentiated aggregation on cost volumes based on their value. The experimental results demonstrate the effectiveness of the proposed modules. On the SCARED dataset, our model reduces the mean depth error by 12.6% compared to the baseline model and outperforms the state-of-the-art unsupervised methods and well-generalized models.

Multiscale chemogenetic dissection of fronto-temporal top-down regulation for object memory in primates

Visual object memory is a fundamental element of various cognitive abilities, and the underlying neural mechanisms have been extensively examined especially in the anterior temporal cortex of primates. However, both macroscopic large-scale functional network in which this region is embedded and microscopic neuron-level dynamics of top-down regulation it receives for object memory remains elusive. Here, we identified the orbitofrontal node as a critical partner of the anterior temporal node for object memory by combining whole-brain functional imaging during rest and a short-term object memory task in male macaques. Focal chemogenetic silencing of the identified orbitofrontal node downregulated both the local orbitofrontal and remote anterior temporal nodes during the task, in association with deteriorated mnemonic, but not perceptual, performance. Furthermore, imaging-guided neuronal recordings in the same monkeys during the same task causally revealed that orbitofrontal top-down modulation enhanced stimulus-selective mnemonic signal in individual anterior temporal neurons while leaving bottom-up perceptual signal unchanged. Furthermore, similar activity difference was also observed between correct and mnemonic error trials before silencing, suggesting its behavioral relevance. These multifaceted but convergent results provide a multiscale causal understanding of dynamic top-down regulation of the anterior temporal cortex along the ventral fronto-temporal network underpinning short-term object memory in primates.

Research on the method of air gap clearance selection for bushing at high-altitude areas

Abstract As an important component of the core equipment of the UHV substation, the operation reliability of the bushing is directly related to the safe operation of the main equipment. There are some technical problems in the development of casing in the Sichuan-Chongqing project, such as technical problems at high altitudes and a lack of relevant experience in the correction of air gap and equipment external insulation altitude. Therefore, there is an urgent need to research the selection of gap distance for UHV AC substation bushing electrical characteristics test in high altitude areas. In this paper, based on the standard meteorological conditions and the rod-plate gap switching impulse discharge test data at an altitude of 4300 m, the minimum gap distance of UHV AC substation bushing withstanding 1800 kV and 1950 kV under different methods is obtained. The results show that by comparing the two calculation methods, the minimum distance calculation method of the true test combined with the gap coefficient method avoids the error of altitude correction, and the minimum gap distance is reduced by 7.84%-14.17% compared with the former. The research content can provide a reference for selecting the dry arc distance of the casing. The next step should be to carry out the discharge characteristic test of the true-size electrode at a high altitude, so as to simulate the field situation more realistically and provide more powerful technical support for the project.

The Effect of Sportsmetrics Training on Landing Technique in Female Volleyball Players With Dynamic Knee Valgus

Background and Aims The most serious and severe injuries among female volleyball players is the knee injury, especially the anterior cruciate ligament (ACL) tear. Its key risk factors are dynamic knee valgus (DKV) and abnormal alignment during jump landing. One of the successful protocols regarding the prevention of knee injuries in female volleyball players is professional sportsmetrics volleyball training. In the present study, the effect of this protocol on DKV correction and landing error scoring system (LESS) was investigated. Methods The current research is quasi-experimental with a pre-test-post-test design. The statistical sample included 30 female volleyball players (Mean±SD age: 20.83±2.22 years, Mean±SD height: 168.16±6.47 cm, Mean±SD weight: 59.13±7.4 kg, Mean±SD body mass index (BMI): 20.83±1.52 kg/m2, and Mean±SD sports experience: 5.46±1.8 years) who were randomly divided into the training (15 people) and control (15 people) groups. Double leg squat and LESS tests were used to evaluate DKV and landing error. The exercise group participated in the present protocol for 6 weeks, three sessions per week. Each session was approximately 90 minutes, including warm-up exercises, sportsmetrics volleyball training, and cool-down. The analyses of covariance were used to evaluate the data at a significant level of P=0.05. Results The results of covariance analysis showed that performing these exercises significantly reduced (P=0.01) DKV (from 23.13 to 7.86) and landing error (from 17.46 to 7.6). In other words, the training group experienced a 66% decrease in DKV and a 56% decrease in landing error after performing six weeks of sportsmetrics volleyball training. Conclusion Sportsmetrics volleyball training has successfully improved performance and prevented ACL injury in female volleyball players. According to the present study results, performing these exercises leads to correct DKV and improves lower extremity alignment and landing technique. Therefore, performing sportsmetrics volleyball training is strongly recommended for female volleyball players with DKV.

Study on the Identification of Execution Errors, Causes, and Specific Corrective Kinetic and Prophylactic Means in Free Throws in Basketball

The identification of execution errors in real-time correction through an innovative specific device to free throw refinement, and through corrective kinetic and prophylactic exercises adapted to basketball game. The study included 92 subjects structured into sports categories: U14, U16, U18, and by gender: female (46 subjects) and male (46 subjects). Subjects were observed to identify the incidence of execution errors in free throws, their causes and correction methods during the study's testing. The study results highlight the decrease in the number of execution errors between the final and initial testing due to the implementation of innovative technology specific to free throw refinement and the application of specific corrective kinetic and prophylactic exercises. For all junior and gender categories of the study, the number of errors decreased in the final testing compared to the initial one, highlighting the importance of identifying errors and causes in real-time and correcting them through specific means.

Rotating dual-retarders to correct polarization measurement error for division-of-amplitude polarimeter in full field of view

The division-of-amplitude polarimeter (DoAP) can measure the four Stokes parameters simultaneously, and has the advantages of snapshot and high spatial resolution. However, the residual polarization aberration (PA) of DoPA system can lead to the polarization measurement error, which is influenced by the field of view. In this paper, the relationship between the measurement errors of Stokes parameters and the Mueller pupil is derived, and the Mueller pupil of DoPA system is obtained by 3D polarization ray-tracing matrix. Then, a method of dual-retarders rotation is proposed to correct the Mueller pupil in full field of view. The simulation demonstrates the PA correction can improve the measurement accuracy of DoPA system, and the measurement error of degree of linear polarization is reduced by 11.5 %, 38.2 % and 11.8 % at 0°, 10° and 15° field of view, respectively. This research facilitates the precise measurement of polarization signals for polarimeters.

Age is not just a number: How incorrect ageing impacts close-kin mark-recapture estimates of population size.

Population size is a key parameter for the conservation of animal species. Close-kin mark-recapture (CKMR) relies on the observed frequency and type of kinship among individuals sampled from the population to estimate population size. Knowledge of the age of the individuals, or a surrogate thereof, is essential for inference with acceptable precision. One common approach, particularly in fish studies, is to measure animal length and infer age using an assumed age-length relationship (a 'growth curve'). We used simulation to test the effect of misspecifying the length measurement error and the growth curve on population size estimation. Simulated populations represented two fictional shark species, one with a relatively simple life history and the other with a more complex life history based on the grey reef shark (Carcharhinus amblyrhynchos). We estimated sex-specific adult abundance, which we assumed to be constant in time. We observed small median biases in these estimates ranging from 1.35% to 2.79% when specifying the correct measurement error standard deviation and growth curve. CI coverage was adequate whenever the growth curve was correctly specified. Introducing error via misspecified growth curves resulted in changes in the magnitude of the estimated adult population, where underestimating age negatively biased the abundance estimates. Over- and underestimating the standard deviation of length measurement error did not introduce a bias and had negligible effect on the variance in the estimates. Our findings show that assuming an incorrect standard deviation of length measurement error has little effect on estimation, but having an accurate growth curve is crucial for CKMR whenever ageing is based on length measurements. If ageing could be biased, researchers should be cautious when interpreting CKMR results and consider the potential biases arising from inaccurate age inference.