Coronary Magnetic Resonance Angiography Techniques Research Articles

The feasibility of 350 μm spatial resolution coronary magnetic resonance angiography at 3 T in humans.

The purposes of this study were to (1) develop a high-resolution 3-T magnetic resonance angiography (MRA) technique with an in-plane resolution approximate to that of multidetector coronary computed tomography (MDCT) and a voxel size of 0.35 × 0.35 × 1.5 mm³ and to (2) investigate the image quality of this technique in healthy participants and preliminarily in patients with known coronary artery disease (CAD). A 3-T coronary MRA technique optimized for an image acquisition voxel as small as 0.35 × 0.35 × 1.5 mm³ (high-resolution coronary MRA [HRC]) was implemented and the coronary arteries of 22 participants were imaged. These included 11 healthy participants (average age, 28.5 years; 5 men) and 11 participants with CAD (average age, 52.9 years; 5 women) as identified on MDCT. In addition, the 11 healthy participants were imaged using a method with a more common spatial resolution of 0.7 × 1 × 3 mm³ (regular-resolution coronary MRA [RRC]). Qualitative and quantitative comparisons were made between the 2 MRA techniques. Normal vessels and CAD lesions were successfully depicted at 350 × 350 μm² in-plane resolution with adequate signal-to-noise ratio (SNR) and contrast-to-noise ratio. The CAD findings were consistent among MDCT and HRC. The HRC showed a 47% improvement in sharpness despite a reduction in SNR (by 72%) and in contrast-to-noise ratio (by 86%) compared with the regular-resolution coronary MRA. This study, as a first step toward substantial improvement in the resolution of coronary MRA, demonstrates the feasibility of obtaining at 3 T a spatial resolution that approximates that of MDCT. The acquisition in-plane pixel dimensions are as small as 350 × 350 μm² with a 1.5-mm slice thickness. Although SNR is lower, the images have improved sharpness, resulting in image quality that allows qualitative identification of disease sites on MRA consistent with MDCT.

Improved SNR efficiency in gradient echo coronary MRA with high temporal resolution using parallel imaging

Contemporary coronary magnetic resonance angiography techniques suffer from signal-to-noise ratio (SNR) constraints. We propose a method to enhance SNR in gradient echo coronary magnetic resonance angiography by using sensitivity encoding (SENSE). While the use of sensitivity encoding to improve SNR seems counterintuitive, it can be exploited by reducing the number of radiofrequency excitations during the acquisition window while lowering the signal readout bandwidth, therefore improving the radiofrequency receive to radiofrequency transmit duty cycle. Under certain conditions, this leads to improved SNR. The use of sensitivity encoding for improved SNR in three-dimensional coronary magnetic resonance angiography is investigated using numerical simulations and an in vitro and an in vivo study. A maximum 55% SNR enhancement for coronary magnetic resonance angiography was found both in vitro and in vivo, which is well consistent with the numerical simulations. This method is most suitable for spoiled gradient echo coronary magnetic resonance angiography in which a high temporal and spatial resolution is required.

Frontiers in Cardiovascular Magnetic Resonance

Cardiovascular magnetic resonance (MR) is emerging as a multipurpose imaging modality for the assessment of cardiovascular disease in general and ischemic heart disease in particular. Currently, the pace of innovation is rapid, and the modality is changing from one that is used primarily as a research tool to one that is increasingly used in routine clinical practice. The process of innovation includes not only improvements in scanner hardware, such as coil and gradient technology, and the development of new contrast agents but also the development of novel pulse sequences. The concept of the pulse sequence, in which programming changes at the scanner can lead to fundamental changes in activating tissue, is unique to MR and gives this modality the potential to assess a vast number of biological parameters. Cardiovascular MR promises to play an important clinical and investigational role in both vascular and cardiac systems. Current and potential future applications of cardiovascular MR will be discussed with a particular focus on ischemic heart disease. Multidetector-row computed tomography, another promising and complementary noninvasive imaging technology, will be discussed briefly in relation to cardiovascular MR for the assessment of atherothrombotic disease. ### Nomenclature and Evolving Imaging Assessment Atherothrombosis is a systemic or multiterritory arterial disease that primarily affects the large- and medium systemic arteries, including the aorta and the carotid, coronary, and peripheral arteries. Although the epicardial coronary arteries appear to be the most susceptible to atherothrombosis,1,2 intramyocardial arteries are relatively resistant. The concept of multiterritory atherothrombosis has been addressed in 2 large studies of symptomatic patients that showed that at entry into the studies, 3% to 8% had symptomatic atherothrombotic disease in all 3 main arterial districts and 23% to 32% had disease in 2 districts.3,4 From a structural point of view, the 4 main components of the atherothrombotic plaques are as follows: (1) fibrocellular, …

Role of magnetic resonance imaging in visualizing coronary arteries.

Ischemic heart disease is the leading cause of death worldwide. At present, coronary angiography is the gold standard for the diagnosis of coronary artery disease. Conventional coronary angiography is an invasive procedure with a small, yet inherent risk of myocardial infarction, stroke, potential arrhythmias, and death. Other noninvasive diagnostic tools, such as electrocardiography, echocardiography, and nuclear imaging are now widely available but are limited by their inability to directly visualize and quantify coronary artery stenoses and predict the stability of plaques. Coronary magnetic resonance angiography (MRA) is a technique that allows visualization of the coronary arteries by noninvasive means; however, it has not yet reached a stage where it can be used in routine clinical practice. Although coronary MRA is a potentially useful diagnostic tool, it has limitations. Further research should focus on improving the diagnostic resolution and accuracy of coronary MRA. This review summarizes results from several studies comparing coronary MRA with conventional coronary angiography. Current two-dimensional and three-dimensional coronary MRA techniques and their limitations are also discussed.

Whole-heart steady-state free precession coronary artery magnetic resonance angiography.

Current implementations of coronary artery magnetic resonance angiography (MRA) suffer from limited coverage of the coronary arterial system. Whole-heart coronary MRA was implemented based on a free-breathing steady-state free-precession (SSFP) technique with magnetization preparation. The technique was compared to a similar implementation of conventional, thin-slab coronary MRA in 12 normal volunteers. Three thin-slab volumes were prescribed: 1) a transverse slab, covering the left main (LM) artery and proximal segments of the left anterior ascending (LAD) and left circumflex (LCX) coronary arteries; 2) a double-oblique slab covering the right coronary artery (RCA); and 3) a double-oblique slab covering the proximal and distal segments of the LCX. The whole-heart data set was reformatted in identical orientations. Visible vessel length, vessel sharpness, and vessel diameter were determined and compared separately for each vessel. Whole-heart coronary MRA visualized LM/LAD (11.7 +/- 3.4 cm) and LCX (6.9 +/- 3.6 cm) over a significantly longer distance than the transverse volume (LM/LAD, 6.1 +/- 1.1 cm, P < 0.001; LCX, 4.2 +/- 1.2 cm, P < 0.05). Improvements in visible vessel length for RCA and LCX in the whole-heart approach vs. their respective targeted volumes were not significant. It is concluded that the whole-heart coronary MRA technique improves visible vessel length and facilitates high-quality coronary MRA of the complete coronary artery tree in a single measurement.

A fast 3D approach for coronary MRA.

Two-dimensional (2D)-breath-hold coronary magnetic resonance angiography (MRA) has been shown to be a fast and reliable method to depict the proximal coronary arteries. Recent developments, however, allow for free-breathing navigator gated and navigator corrected three-dimensional (3D) coronary MRA. These 3D approaches have potential for improved signal-to-noise ratio (SNR) and allow for the acquisition of adjacent thin slices without the misregistration problems known from 2D approaches. Still, a major impediment of a 3D acquisition is the increased scan time. The purpose of this study was the implementation of a free-breathing navigator gated and corrected ultra-fast 3D coronary MRA technique, which allows for scan times of less than 5 minutes. Twelve healthy adult subjects were examined in the supine position using a navigator gated and corrected ECG triggered ultra-fast 3D interleaved gradient echo planar imaging sequence (TFE-EPI). A 3D slab, consisting of 20 slices with a reconstructed slice thickness of 1.5 mm, was acquired with free-breathing. The diastolic TFE-EPI acquisition block was preceded by a T2prep pre-pulse, a diaphragmatic navigator pulse, and a fat suppression pre-pulse. With a TR of 19 ms and an effective TE of 5.4 ms, the duration of the data acquisition window duration was 38 ms. The in-plane spatial resolution was 1.0-1.3 mm*1.5-1.9 mm. In all cases, the entire left main (LM) and extensive portions of the left anterior descending (LAD) and right coronary artery (RCA) could be visualized with an average scan time for the entire 3D-volume data set of 2:57 +/- 0:51 minutes. Average contiguous vessel length visualized was 53 +/- 11 mm (range: 42 to 75 mm) for the LAD and 84 +/- 14 mm (range: 62 to 112 mm) for the RCA. Contrast-to-noise between coronary blood and myocardium was 5.0 +/- 2.3 for the LM/LAD and 8.0 +/- 2.9 for the RCA, resulting in an excellent suppression of myocardium. We present a new approach for free-breathing 3D coronary MRA, which allows for scan times superior to corresponding 2D coronary MRA approaches, and which takes advantage of the enhanced SNR of 3D acquisitions and the post-processing benefits of thin adjacent slices. The robust image quality and the short average scanning time suggest that this approach may be useful for screening the major coronary arteries or identification of anomalous coronary arteries. J. Magn. Reson. Imaging 1999;10:821-825.

MR Angiography of the Coronary Arteries

Magnetic resonance angiography (MRA) of the coronary arteries has recently become possible due to the development of a new group of ultrafast imaging sequences. Coronary arteries are small, tortuous vessels subjected to significant physiological motions (respiration and cardiac contractions). Most coronary MRA pulse sequences rely on a combination of segmental acquisition of data (in k-space) to minimize cardiac motion artifacts and patient breath-holding to minimize respiratory motion artifacts. MR is noninvasive, does not require any contrast agents or ionizing radiation, and thus offers the potential of becoming a very important cardiac screening tool. Coronary MRA can routinely depict the proximal and middle portion of most coronary arteries and some coronary artery branches. However, its clinical utility for detecting lesions has not yet been proven. As coronary MRA techniques improve they may become an integral part of the evaluation of patients with ischemic heart disease. Existing coronary MRA techniques can already play a significant clinical role in the evaluation of coronary artery anomalies, in the follow-up of proximal lesions after angioplasty, and in the noninvasive determination of patency of bypass grafts and coronary stents.