Magnetic Resonance Imaging Coronary Angiography Research Articles

Coronary Artery Magnetic Resonance Angiography Combined with Computed Tomography Angiography in Diagnosis of Coronary Heart Disease by Reconstruction Algorithm.

This research aimed at discussing the diagnosis effect of coronary artery magnetic resonance angiography (MRA) combined with computed tomography (CT) angiography (CTA) based on the back-projection filter reconstruction (BPFR) algorithm in coronary heart disease (CHD), and its role in the diagnosis of coronary artery disease (CAD). Sixty patients with CHD were selected and randomly rolled into group A (undergone MRA examination), group B (undergone CTA examination), and group C (undergone MRA + CTA), with 20 cases in each group. Taking the diagnostic results of coronary angiography as the gold standard, the MRA and CTA images were reconstructed using a BPFR algorithm, and a filter function was added to solve the problem of image sharpness. In addition, the iterative reconstruction algorithm and the Fourier transform analysis method were introduced. As a result, the image clarity and resolution obtained by the BPFR algorithm were better than those obtained by the Fourier transform analytical method and the iterative reconstruction algorithm. The accuracy of group C for the diagnosis of mild coronary stenosis, moderate stenosis, and severe stenosis was 94.02%, 96.13%, and 98.01%, respectively, which was significantly higher than that of group B (87.5%, 90.2%, and 88.4%) and group C (83.4%, 89.1%, and 91.5%) (P < 0.05). The sensitivity and specificity for the diagnosis of noncalcified plaque in group C were 87.9% and 89.2%, respectively, and the sensitivity and specificity for the diagnosis of calcified plaque were 84.5% and 78.4%, respectively, which were significantly higher than those in groups B and C (P < 0.05). In summary, the BPFR algorithm had good denoising and artifact removal effects on coronary MRA and CTA images. The combined detection of reconstructed MRA and CTA images had a high diagnostic value for CHD.

Clinical Application of Non-Contrast-Enhanced Dixon Water-Fat Separation Compressed SENSE Whole-Heart Coronary MR Angiography at 3.0T With and Without Nitroglycerin.

3.0 T non-contrast-enhanced nitroglycerin (NTG)-assisted whole-heart coronary magnetic resonance angiography (MRA) employing Dixon water-fat separation and compressed SENSE (CS-SENSE) acceleration is a promising method for diagnosing coronary artery disease (CAD). To evaluate the diagnostic performance of this technique for detecting clinically-relevant (≥50% diameter reducing) CAD and to evaluate the difference in NTG-induced coronary vasodilation between patients with and without clinically-relevant CAD. Prospective. Sixty-six patients with suspected CAD. 3.0T; CSSENSE, Dixon water-fat separation, three-dimensional segmented turbo field gradient-echo sequence for whole-heart coronary MRA. Overall image quality of coronary MRA was calculated on the basis of all visible coronary segments. The diagnostic performance of coronary MRA for detecting a ≥50% reduction in coronary artery diameter with and without NTG was compared using X-ray coronary angiography (CAG) as the reference. According to CAG, patients were divided into a non-clinically-relevant CAD group and clinically-relevant CAD group, and the difference in NTG-induced vasodilation between the groups was evaluated. Unpaired/paired Student's t-test, Mann-Whitney U test, paired Wilcoxon signed-rank test, χ2 test, McNemar test. A two-tailed P value <0.05 was considered significant. Overall image quality was increased significantly in the coronary MRA images after NTG. The diagnostic performance of the non-NTG vs. NTG-assisted coronary MRA was as follows on a per-patient basis: sensitivity 94.3% vs. 94.3%, specificity 64.5% vs. 83.9%, positive predictive value 75.0% vs. 86.8%, negative predictive value 90.9% vs. 92.9%, and accuracy 80.3% vs. 89.4%, respectively. NTG-induced vasodilation was significantly lower in the clinically-relevant CAD group than in the non-clinically-relevant CAD group (13.7 ± 8.1% vs. 24.1 ± 16.3%). Non-contrast Dixon water-fat separation CS-SENSE coronary MRA at 3.0T can noninvasively detect clinically-relevant CAD and sublingual NTG improved performance. Combining pre- and post-NTG coronary MRA may provide a simple noninvasive and nonionizing test to evaluate coronary vasodilation function. 1 TECHNICAL EFFICACY STAGE: 2.

3D whole-heart isotropic sub-millimeter resolution coronary magnetic resonance angiography with non-rigid motion-compensated PROST

BackgroundTo enable free-breathing whole-heart sub-millimeter resolution coronary magnetic resonance angiography (CMRA) in a clinically feasible scan time by combining low-rank patch-based undersampled reconstruction (3D-PROST) with a highly accelerated non-rigid motion correction framework.MethodsNon-rigid motion corrected CMRA combined with 2D image-based navigators has been previously proposed to enable 100% respiratory scan efficiency in modestly undersampled acquisitions. Achieving sub-millimeter isotropic resolution with such techniques still requires prohibitively long acquisition times. We propose to combine 3D-PROST reconstruction with a highly accelerated non-rigid motion correction framework to achieve sub-millimeter resolution CMRA in less than 10 min. Ten healthy subjects and eight patients with suspected coronary artery disease underwent 4–5-fold accelerated free-breathing whole-heart CMRA with 0.9 mm3 isotropic resolution. Vessel sharpness, vessel length and image quality obtained with the proposed non-rigid (NR) PROST approach were compared against translational correction only (TC-PROST) and a previously proposed NR motion-compensated technique (non-rigid SENSE) in healthy subjects. For the patient study, image quality scoring and visual comparison with coronary computed tomography angiography (CCTA) were performed.ResultsAverage scan times [min:s] were 6:01 ± 0:59 (healthy subjects) and 8:29 ± 1:41 (patients). In healthy subjects, vessel sharpness of the left anterior descending (LAD) and right (RCA) coronary arteries were improved with the proposed non-rigid PROST (LAD: 51.2 ± 8.8%, RCA: 61.2 ± 9.1%) in comparison to TC-PROST (LAD: 43.8 ± 5.1%, P = 0.051, RCA: 54.3 ± 8.3%, P = 0.218) and non-rigid SENSE (LAD: 46.1 ± 5.8%, P = 0.223, RCA: 56.7 ± 9.6%, P = 0.50), although differences were not statistically significant. The average visual image quality score was significantly higher for NR-PROST (LAD: 3.2 ± 0.6, RCA: 3.3 ± 0.7) compared with TC-PROST (LAD: 2.1 ± 0.6, P = 0.018, RCA: 2.0 ± 0.7, P = 0.014) and non-rigid SENSE (LAD: 2.3 ± 0.5, P = 0.008, RCA: 2.5 ± 0.7, P = 0.016). In patients, the proposed approach showed good delineation of the coronaries, in agreement with CCTA, with image quality scores and vessel sharpness similar to that of healthy subjects.ConclusionsWe demonstrate the feasibility of combining high undersampling factors with non-rigid motion-compensated reconstruction to obtain high-quality sub-millimeter isotropic CMRA images in ~ 8 min. Validation in a larger cohort of patients with coronary artery disease is now warranted.

Non-contrast compressed sensing whole-heart coronary magnetic resonance angiography at 3T: A comparison with conventional imaging

ObjectivesWhole-heart coronary magnetic resonance angiography (MRA) is a promising non-contrast, radiation-free technique for assessing the coronary artery. Yet, a disadvantage of coronary MRA is the relatively long acquisition time. The purpose of this study was to evaluate the scan time and image quality of compressed sensing (CS) coronary MRA compared with conventional coronary MRA. Materials and methodsTwenty healthy volunteers underwent navigator-gated coronary MRA with a CS prototype sequence and conventional navigator-gated coronary MRA on a clinical 3T MRI scanner without contrast medium. The spatial resolutions were 1.33 × 1.33 × 1.20 mm3 for CS and 1.33 × 1.33 × 1.48 mm3 interpolated to 0.70 × 0.70 × 1.20 mm3 for conventional, respectively. We compared acquisition times, rated image quality on a 4-point scale (RCA; proximal, middle, and distal, LAD; main, proximal, middle, and distal, LCX; proximal and distal), and measured the visualized vessel lengths of three vessels. ResultsThe mean acceptance rates were 44.9% for CS coronary MRA and 48.7% for conventional coronary MRA (p = .39). The mean effective scan time was 3 min 45 s for CS coronary MRA and 15 min 6 s for conventional coronary MRA (p < 0.001). Image quality scores were significantly lower for CS coronary MRA than for conventional coronary MRA (3.4 ± 0.7 for CS vs. 3.8 ± 0.4 for conventional; p < 0.0001). Conventional coronary MRA images were scored >3.4 in all segments on average, while CS coronary MRA images were scored >3.2 (good quality for diagnosis) in almost all segments, with only the distal RCA segment graded 2.9 on average. The average visible vessel lengths for CS and conventional coronary MRA were as follows: 11.5 ± 4.4 cm and 12.5 ± 4.8 cm for the RCA, respectively (p < 0.05, 95% limits of agreement [LOA]; −3.6 to 1.6 cm); 10.6 ± 3.0 cm and 11.1 ± 2.9 cm for the LAD, respectively (p = .15, 95% LOA −4.0 to 2.8 cm); and 7.1 ± 2.2 cm and 8.2 ± 2.5 cm for the LCX, respectively (p < 0.05, 95% LOA −4.0 to 1.7 cm). ConclusionsNon-contrast coronary MRA using CS could largely shorten acquisition time, compared with conventional navigator-gated coronary MRA, while maintaining acceptable visualization at 3T.

Diagnostic Performance of Self-navigated Whole-Heart Contrast-enhanced Coronary 3-T MR Angiography

Purpose To evaluate the diagnostic performance of self-navigated whole-heart coronary 3-T magnetic resonance (MR) angiography by using conventional invasive coronary angiography (ICA) as the reference gold standard. Materials and Methods This study was approved by the local ethics committee. Written informed consent was obtained from each patient before the study. Thirty-nine consecutive patients underwent coronary MR angiography and later underwent ICA. Coronary MR angiography was performed with a 3-T imager with contrast agent enhancement during free breathing with self-navigated affine motion correction reconstruction. Coronary segments with reference diameters larger than 1.5 mm were included in the comparison between coronary MR angiography and ICA. The coronary MR angiography images were evaluated by two experienced readers blinded to the ICA results to identify significant luminal narrowing (>50% diameter reduction in reference ICA). Sensitivity, specificity, positive predictive value, negative predictive value, and accuracy were performed to detect significant coronary artery stenosis. Results Coronary MR angiography examinations were successfully performed in all 39 patients. A total of 327 coronary segments had reference luminal diameter larger than 1.5 mm. Of these 327 coronary segments, 303 (92.7%) segments had a quality score greater than 1 at coronary MR angiography and were included in the analysis. The sensitivity, specificity, positive predictive value, negative predictive value, and accuracy were 78.2%, 75.0%, 81.8%, 70.6%, and 76.9%, respectively, on a per-patient basis. Conclusion Contrast-enhanced self-navigated coronary 3-T MR angiography is a promising technique for the noninvasive detection of clinically significant coronary stenosis. © RSNA, 2016.

Coronary MR angiography at 3T: fat suppression versus water-fat separation.

ObjectivesTo compare Dixon water-fat suppression with spectral pre-saturation with inversion recovery (SPIR) at 3T for coronary magnetic resonance angiography (MRA) and to demonstrate the feasibility of fat suppressed coronary MRA at 3T without administration of a contrast agent.Materials and methodsCoronary MRA with Dixon water-fat separation or with SPIR fat suppression was compared on a 3T scanner equipped with a 32-channel cardiac receiver coil. Eight healthy volunteers were examined. Contrast-to-noise ratio (CNR), signal-to-noise ratio (SNR), right coronary artery (RCA), and left anterior descending (LAD) coronary artery sharpness and length were measured and statistically compared. Two experienced cardiologists graded the visual image quality of reformatted Dixon and SPIR images (1: poor quality to 5: excellent quality).ResultsCoronary MRA images in healthy volunteers showed improved contrast with the Dixon technique compared to SPIR (CNR blood-fat: Dixon = 14.9 ± 2.9 and SPIR = 13.9 ± 2.1; p = 0.08, CNR blood-myocardium: Dixon = 10.2 ± 2.7 and SPIR = 9.11 ± 2.6; p = 0.1). The Dixon method led to similar fat suppression (fat SNR with Dixon: 2.1 ± 0.5 vs. SPIR: 2.4 ± 1.2, p = 0.3), but resulted in significantly increased SNR of blood (blood SNR with Dixon: 19.9 ± 4.5 vs. SPIR: 15.5 ± 3.1, p < 0.05). This means the residual fat signal is slightly lower with the Dixon compared to the SIPR technique (although not significant), while the SNR of blood is significantly higher with the Dixon technique. Vessel sharpness of the RCA was similar for Dixon and SPIR (57 ± 7 % vs. 56 ± 9 %, p = 0.2), while the RCA visualized vessel length was increased compared to SPIR fat suppression (107 ± 21 vs. 101 ± 21 mm, p < 0.001). For the LAD, vessel sharpness (50 ± 13 % vs. 50 ± 7 %, p = 0.4) and vessel length (92 ± 46 vs. 90 ± 47 mm, p = 0.4) were similar with both techniques. Consequently, the Dixon technique resulted in an improved visual score of the coronary arteries in the water fat separated images of healthy subjects (RCA: 4.6 ± 0.5 vs. 4.1 ± 0.7, p = 0.01, LAD: 4.1 ± 0.7 vs. 3.5 ± 0.8, p = 0.007).ConclusionsDixon water-fat separation can significantly improve coronary artery image quality without the use of a contrast agent at 3T.

Assessment of Coronary Artery Disease Using Magnetic Resonance Coronary Angiography: A National Multicenter Trial

This national multicenter study determined the diagnostic performance of 1.5-T whole-heart coronary magnetic resonance angiography (MRA) in patients with suspected coronary artery disease (CAD).Whole-heart coronary MRA using steady-state free precession allows noninvasive detection of CAD without the administration of contrast medium. However, the accuracy of this approach has not been determined in a multicenter trial.Using a 1.5-T magnetic resonance imaging unit, free-breathing steady-state free precession whole-heart coronary MRA images were acquired for 138 patients with suspected CAD at 7 hospitals. The accuracy of MRA for detecting a ≥ 50% reduction in diameter was determined using X-ray coronary angiography as the reference method.Acquisition of whole-heart coronary MRA images was performed in 127 (92%) of 138 patients with an average imaging time of 9.5 ± 3.5 min. The areas under the receiver-operator characteristic curve from MRA images according to vessel- and patient-based analyses were 0.91 (95% confidence interval [CI]: 0.87 to 0.95) and 0.87 (95% CI: 0.81 to 0.93), respectively. The sensitivity, specificity, positive and negative predictive values, and accuracy of MRA according to a patient-based analysis were 88% (49 of 56, 95% CI: 75% to 94%), 72% (51 of 71, 95% CI: 60% to 82%), 71% (49 of 69, 95% CI: 59% to 81%), 88% (51 of 58, 95% CI: 76% to 95%), and 79% (100 of 127, 95% CI: 72% to 86%), respectively.Non-contrast-enhanced whole-heart coronary MRA at 1.5-T can noninvasively detect significant CAD with high sensitivity and moderate specificity. A negative predictive value of 88% indicates that whole-heart coronary MRA can rule out CAD.

Acute myocardial infarction in a patient with anomalous origin of the right coronary artery: Depiction at whole-heart coronary magnetic resonance angiography and delayed-enhanced imaging

A 71-year-old man was admitted to our hospital because of anterior chest pain. His electrocardiogram showed ST-segment depression and cardiac enzymes were normal. Non-ST-elevation acute myocardial infarction was suspected and whole-heart magnetic resonance imaging was performed. Whole-heart coronary magnetic resonance angiography (MRA) showed an anomalous origin of the right coronary artery from the left sinus of Valsalva and delayed-enhanced imaging showed transmural hyperenhancement of the inferior wall. Coronary angiography revealed the anomalous origin of the right coronary artery (RCA) from the left sinus of Valsalva and occlusion in the proximal portion of the RCA. Coronary revascularization was achieved by intracoronary thrombolysis followed by stent implantation. Whole-heart coronary MRA and delayed-enhanced imaging allows simultaneous assessment of coronary artery anomaly and extent of myocardial infarction.

Feasibility and Diagnostic Accuracy of Whole Heart Coronary MR Angiography Using Free-Breathing 3D Balanced Turbo-Field-Echo with SENSE and the Half-Fourier Acquisition Technique

ObjectiveWe wanted to assess the feasibility and diagnostic accuracy of whole heart coronary magnetic resonance angiography (MRA) with using 3D balanced turbo-field-echo (b-TFE) with SENSE and the half-Fourier acquisition technique for identifying stenoses of the coronary artery.Materials and MethodsTwenty-one patients who underwent both whole heart coronary MRA examinations and conventional catheter coronary angiography examinations were enrolled in the study. The whole heart coronary MRA images were acquired using a navigator gated 3D b-TFE sequence with SENSE and the half-Fourier acquisition technique to reduce the acquisition time. The imaging slab covered the whole heart (80 contiguous slices with a reconstructed slice thickness of 1.5 mm) along the transverse axis. The quality of the images was evaluated by using a 5-point scale (0 -uninterpretable, 1 - poor, 2 - fair, 3 - good, 4 - excellent). Ten coronary segments of the heart were evaluated in each case; the left main coronary artery (LM), and the proximal, middle and distal segments of the left anterior descending (LAD), the left circumflex (LCX) and the right coronary artery (RCA). The diagnostic accuracy of whole heart coronary MRA for detecting significant coronary artery stenosis was determined on the segment-by-segment basis, and it was compared with the results obtained by conventional catheter angiography, which is the gold standard.ResultsThe mean image quality was 3.7 in the LM, 3.2 in the LAD, 2.5 in the LCX, and 3.3 in the RCA, respectively (the overall image quality was 3.0±0.1). 168 (84%) of the 201 segments had an acceptable image quality (≥grade 2). The sensitivity, specificity, accuracy, negative predictive value and positive predictive value of the whole heart coronary MRA images for detecting significant stenosis were 81.3%, 92.1%, 91.1%, 97.9%, and 52.0%, respectively. The mean coronary MRA acquisition time was 9 min 22 sec (±125 sec).ConclusionWhole heart coronary MRA is a feasible technique, and it has good potential to evaluate the major portions of the coronary arteries with an acceptable image quality within a reasonable scan time.

Artifact-Free Coronary Magnetic Resonance Angiography and Coronary Vessel Wall Imaging in the Presence of a New, Metallic, Coronary Magnetic Resonance Imaging Stent

Coronary in-stent restenosis cannot be directly assessed by magnetic resonance angiography (MRA) because of the local signal void of currently used stainless steel stents. The aim of this study was to investigate the potential of a new, dedicated, coronary MR imaging (MRI) stent for artifact-free, coronary MRA and in-stent lumen and vessel wall visualization. Fifteen prototype stents were deployed in coronary arteries of 15 healthy swine and investigated with a double-oblique, navigator-gated, free-breathing, T2-prepared, 3D cartesian gradient-echo sequence; a T2-prepared, 3D spiral gradient-echo sequence; and a T2-prepared, 3D steady-state, free-precession coronary MRA sequence. Furthermore, black-blood vessel wall imaging by a dual-inversion-recovery, turbo spin-echo sequence was performed. Artifacts of the stented vessel segment and signal intensities of the coronary vessel lumen inside and outside the stent were assessed. With all investigated sequences, the vessel lumen and wall could be visualized without artifacts, including the stented vessel segment. No signal intensity alterations inside the stent when compared with the vessel lumen outside the stent were found. The new, coronary MRI stent allows for completely artifact-free coronary MRA and vessel wall imaging.

Contrast agent-enhanced, free-breathing, three-dimensional coronary magnetic resonance angiography.

For free-breathing, high-resolution, three-dimensional coronary magnetic resonance angiography (MRA), the use of intravascular contrast agents may be helpful for contrast enhancement between coronary blood and myocardium. In six patients, 0.1 mmol/kg of the intravascular contrast agent MS-325/AngioMARK was given intravenously followed by double-oblique, free-breathing, three-dimensional inversion-recovery coronary MRA with real-time navigator gating and motion correction. Contrast-enhanced, three-dimensional coronary MRA images were compared with images obtained with a T2 prepulse (T2Prep) without exogenous contrast. The contrast-enhanced images demonstrated a 69% improvement in the contrast-to-noise ratio (6.6 +/- 1.1 vs. 11.1 +/- 2.5; P < 0.01) compared with the T2Prep approach. By using the intravascular agent, extensive portions (> 80 mm) of the native left and right coronary system could be displayed consistently with sub-millimeter in-plane resolution. The intravascular contrast agent, MS-325/AngioMARK, leads to a considerable enhancement of the blood/muscle contrast for coronary MRA compared with T2Prep techniques. The clinical value of the agent remains to be defined in a larger patient series. J. Magn. Reson. Imaging 1999;10:790-799.

Breathhold three-dimensional coronary magnetic resonance angiography using real-time navigator technology.

The acquisition duration of most three-dimensional (3D) coronary magnetic resonance angiography (MRA) techniques is considerably prolonged, thereby precluding breathholding as a mechanism to suppress respiratory motion artifacts. Splitting the acquired 3D volume into multiple subvolumes or slabs serves to shorten individual breathhold duration. Still, problems associated with misregistration due to inconsistent depths of expiration and diaphragmatic drift during sustained respiration remain to be resolved. We propose the combination of an ultrafast 3D coronary MRA imaging sequence with prospective real-time navigator technology, which allows correction of the measured volume position. 3D volume splitting using prospective real-time navigator technology, was successfully applied for 3D coronary MRA in five healthy individuals. An ultrafast 3D interleaved hybrid gradient-echoplanar imaging sequence, including T2Prep for contrast enhancement, was used with the navigator localized at the basal anterior wall of the left ventricle. A 9-cm-thick volume, with in-plane spatial resolution of 1.1 x 2.2 mm, was acquired during five breathholds of 15-sec duration each. Consistently, no evidence of misregistration was observed in the images. Extensive contiguous segments of the left anterior descending coronary artery (48 +/- 18 mm) and the right coronary artery (75 +/- 5 mm) could be visualized. This technique has the potential for screening for anomalous coronary arteries, making it well suited as part of a larger clinical MR examination. In addition, this technique may also be applied as a scout scan, which allows an accurate definition of imaging planes for subsequent high-resolution coronary MRA.