Coronal Shear Fracture Research Articles

Minimum four-year clinical outcomes after on-table reconstruction technique for Dubberley type III in coronal shear fractures of the capitellum and trochlea: a report of 10 patients

PurposeComminuted coronal shear fractures of the distal humerus represent rare injuries and are difficult to treat, especially comminuted capitellum and trochlear fractures (Dubberley Type III). The on-table reconstruction technique of comminuted articular fractures may be an option, although it has not been reported in the coronal shear fracture of the distal humerus. The aim of the present case series is to determine the functional and radiological outcomes of on-table reconstructed Dubberley III fractures.MethodsA retrospective review was conducted of 10 patients with Dubberley type III fractures in coronal shear fractures of the capitellum and trochlea who underwent an ‘on-table’ reconstruction technique between January 2009 and October 2019. All patients were evaluated using the disabilities of the arm, shoulder, and hand (DASH) score, American Shoulder and Elbow Surgeons(ASES) score, Mayo Elbow Score Performance Index (MEPI) score and at least 4 years later.ResultsAll cases achieved union. At the final follow-up, the mean range of elbow motion was 11.5°of flexion contracture and 131.9° of further flexion. The mean DASH score was 21.2 (5.7) points (range 13.3–32.5). The mean ASES score was 88.6 ± 7.4 (range, 77 to 100). The mean MEPI score was 87 (10) points (range 70–100). In complication, partial osteonecrosis of capitellum is developed in one patient. One patient had heterotopic ossification without functional impairment.ConclusionThe on-table reconstruction technique can be a reliable option in the surgical treatment of complex distal humerus fractures. This technique allows anatomical reduction of comminuted capitellum and trochlea, with a low risk of avascular necrosis over 4 years of follow-up.Level of evidenceLevel IV, retrospective case series.

Supine Posterior Hoop Plating of Bicondylar Posterior Coronal Shear Tibial Plateau Fractures Without Fibular Osteotomy.

Tibial plateau posterolateral fragments, especially those associated with articular depression, are difficult to capture and support with anteriorly or lateral based implants. Applying implants to the posterior plateau has traditionally involved a prone approach or fibular osteotomy, especially when access to both the medial and lateral sides is necessary, such as a bicondylar posterior coronal shear fracture pattern. By combining two previously described techniques for posterolateral rim plating and bicondylar hoop plating, we describe a novel technique to apply a posterior bicondylar hoop implant in the supine position without fibular osteotomy for bicondylar posterior coronal shear injuries.

Coronal shear fractures of the femoral neck: a comparison with basicervical fractures.

We propose coronal shear fracture of the femoral neck (CSFF) as a new type of fracture that differs from a basicervical fracture. This study aimed to present the incidence of CSFF and compare its clinical characteristics and outcomes with those of basicervical fractures. In this multicenter retrospective cohort study, 2207 patients with hip fractures were identified using computed tomography (CT), 17 and 27 patients were diagnosed with CSFF (CSFF group) and basicervical fractures (basicervical fracture group), respectively. The primary outcome was reoperation, while the secondary outcomes were postoperative radiographic findings, ambulatory ability, and 1-year mortality rate. These outcomes were compared between the two groups. We also conducted diagnostic reliability tests for these fractures using the Cohen's kappa coefficient. The incidence of CSFF and basicervical fractures in the 2207 patients were 0.77% and 1.22%, respectively. The inter-and intra-observer agreements for the diagnosis were almost perfect. The comorbidity score was significantly higher in the CSFF group than in the basicervical fracture group. No reoperations occurred in both groups. There were no significant intergroup differences in the postoperative radiographic findings. The 1-year mortality rate was higher in the CSFF group than in the basicervical fracture group (38.5% vs. 5.3%; odds ratio: 11.9, 95% CI: 1.2-118.5; p = 0.025). This study presents the definition and incidence of CSFF with a high diagnostic reliability. Patients with CSFF had similar reoperation rate postoperative radiographic outcomes to basicervical fractures, while 1-year mortality rate was high.

Surgical Outcomes of Coronal Shear Fracture of the Distal Humerus in Elderly Adults.

This study evaluated clinical outcomes of elderly adults with coronal shear fractures (CSFs) of the distal humerus treated by open reduction and internal fixation (ORIF). Between April 2002 and March 2019, data from eight elderly patients (76.3 ± 5.1 years) with CSFs of the distal humerus were analyzed retrospectively. Postoperative complications, range of motion of the elbow joint, and functional elbow scoring (Mayo Elbow Performance Score; MEPS) were assessed. The mean follow-up duration was 23.6 ± 13.9 months. CSFs were treated by a buried implantable headless screw or Kirshner wires or bioresorbable screw with/without lateral locking plates. There were no superficial or deep infections or elbow joint instability. Seven patients obtained fracture healing, but one patient exhibited nonunion. Osteochondritis dissecans was present in one patient. Three patients had a step-off deformity (>2 mm) of the articular surface. Two patients exhibited collapse of the fractured articular surface. A patient with severe comminution of both the capitellum and trochlea exhibited collapse of the entire articular surface, with osteonecrosis of the capitellum and trochlea. Mean range of motion of the elbow was 116.3±12.7° of flexion and -28.8±14.1° of extension. The mean MEPS was 78.8±10.2 points, representing patients scored as excellent (n=1), good (n=3), and fair (n=4). ORIF yielded satisfactory outcomes for elderly adults with noncomminuted CSFs of the distal humerus. However, treatment of comminuted articular fracture fragment and complex posterior fracture remains challenging.

Coronal shear fractures of the distal humerus managed according to the Modified Dubberley Classification System.

Coronal shear fractures of the capitellum and trochlea are relatively uncommon and can be challenging to treat because of variable articular comminution and poor bone stock. Classification is valuable to help guide surgical decision making and prognosis. The aim of this study was to present a large series of coronal shear fractures treated according to the Modified Dubberley Classification System (MDCS). Forty-five patients with a coronal shear fracture were followed up (12-93 months, mean: 28 months) after surgical intervention. Fractures were classified according to the MDCS by 3 observers, and outcome data collected included Oxford elbow score (OES), visual analog pain score (VAS), range of motion, complications, and radiographic findings. There were 10 type 1, 12 type 2, 8 type 3, and 15 type 4 fractures. There were 26 subtype B fractures (posterior comminution). A total of 37 patients underwent open reduction and internal fixation (ORIF) and 8 primary arthroplasty. The median OES and VAS were 43(16-48) and 2 (0-9), respectively. Median flexion extension arc was 125° (range, 70°-140°). There was no significant difference in OES, VAS, or range of motion according to fracture type (types 1-4), subtype (type a or b), or treatment method (arthroplasty vs. ORIF). The overall complication and reoperation rates were 31% and 33%, respectively. A total of 75% of complications occurred in type 3 and 4 fractures, and there was a nonsignificant trend toward higher complication rate in type B fractures than type A fractures (34% vs. 16%, P = .19). Patients with a type B fracture who underwent screw-only fixation had a significantly lower OES and higher complication rate compared with when they had combined plating with screws (OES, P = .03; complications P = .04) and compared with when an arthroplasty was performed (OES, P = .05; complications P = .04). Consistently good outcomes can be achieved by classification and management according to the MDCS. It is recommended that type B fractures undergo combined plate and screw fixation and that type 4 fractures should be considered for arthroplasty because of the higher risk of complications with ORIF.

Coronal shear fracture of the distal humerus with lateral epicondyle fracture in a child

Coronal shear fracture of the distal humerus with lateral epicondyle fracture in a child

Biomechanical properties of a novel fixation system for intra-articular distal humerus fractures: a finite element analysis

BackgroundThe traditional strategy for fixing intra-articular distal humerus fractures is double plating placed in an orthogonal configuration, based on posterior approach. With a combined medial and lateral approach, a novel configuration of plating (combined anteromedial and anterolateral plating) has been used. In this study, we investigated the biomechanical properties of the novel plating by comparing it with some traditional strategies.MethodsBased on the 3D morphology of a healthy subject’s humerus, models of three types of intra-articular distal humeral fractures were established using a variety of different internal fixation methods: (a) treatment of a simple intra-articular fracture of the distal humerus with the novel double plate and a traditional orthogonal plate; (b) treatment of a comminuted fracture of the lower distal humerus with the novel double plate, a traditional orthogonal plate and a traditional orthogonal plate combined with distally extended tension screws; (c) treatment of a coronal shear fracture of the distal humerus with the novel double plate, a traditional orthogonal plate and the intra-articular placement of three screws. The material properties of all plates and screws were isotropic and linearly elastic. The Poisson ratio of the implant and bone was 0.3, and the elastic modulus of the implant was 114,000 MPa. The axial loading is 200 N, the bending loading is 30 N and varus rotation is 7.5 Nm in the longitudinal direction.ResultsA simple model of intra-articular fracture of the distal humerus (AO C1 type) was established. Under all experimental conditions, the novel double plate showed greater stiffness than the orthogonal double plate. The axial straightening, bending compression and varus torsion increased by 18.00%, 16.00% and 44.00%, respectively. In the model of comminuted fracture of the lower distal humerus, the novel double plate showed the best stiffness under three experimental conditions (163.93 N/mm, 37.97 N/mm, 2697.84 N mm/°), and the stiffness of the traditional orthogonal plate combined with the distally extended tension screws was similar to that of the traditional orthogonal plate (121.21 N/mm, 32.61 N/mm, 1968.50 N mm/°). In the model of coronal shear fracture of the distal humerus, the novel double plate showed the best stiffness under all test conditions (194.17 N/mm, 38.46 N/mm, 2929.69 N mm/°), followed by the traditional plate (153.85 N/mm, 33.33 N/mm, 2650.18 N mm/°), while the stiffness of the three screws was the smallest (115.61 N/mm, 28.30 N/mm, 2180.23 N mm/°).ConclusionsIn terms of biomechanics, compared with other internal fixation methods, the novel combined anteromedial and anterolateral anatomical locking double-plate showed less stress, less displacement and greater stiffness. The novel double-plate method can be used to treat not only simple intra-articular fractures of the humerus but also complex comminuted fractures of the lower distal humerus and coronal shear fractures of the distal humerus, with a better effect than current traditional internal fixation methods.

Isolated coronal shear fracture of the humeral trochlea: a case report and review of the literature

Isolated coronal shear fracture of the humeral trochlea: a case report and review of the literature

Involvement of the medial and lateral epicondyles in distal humeral coronal shear fractures: Case series and literature review.

Epicondyle involvement in capitellar and trochlear fractures is often considered a simple associated lesion that does not substantially change treatment or prognosis. Although theoretically predicted in reviews, case series almost never report elbow prosthesis use in comminuted coronal shear injuries associated with epicondylar fracture in the elderly. The purpose of this study is to focus on this underestimated injury pattern that can be a negative risk factor for treatment and prognosis. We retrospectively reviewed all cases with coronal shear fracture of the distal humerus treated from 2016 to 2019. Fractures were classified according to Dubberley. Open reduction and internal fixation (ORIF) were performed when possible. Partial or total elbow replacement was used in severely comminuted fractures with epicondylar involvement in four elderly patients. Nineteen consecutive patients were selected (mean age: 62.4years), of which 10 had type 3A/3B fractures, and seven had both medial and lateral epicondylar involvement. The mean follow-up duration was 31.78months. The average Mayo Elbow Performance Index (MEPI) score was 81.05 points, with 7 excellent, 8 good, 1 fair, and 3 poor results. The average MEPI score of Dubberley's type 1 and type 2 was better than that of type 3 (mean: 92 vs. 72, p = 0.02). Further, the results of average range of motion were better in patients who had sustained Dubberley types 1 and 2 lesions than those with Dubberley type 3 lesion (mean: 133° vs. 85°, p = 0.002). Two patients out of three who required intra-operative conversion to total elbow arthroplasty had poor outcomes. The simultaneous presence of fracture of one or both epicondyles are usually associated with severe joint comminutions and makes ORIF more challenging, especially among elderly women. In these cases, primary total elbow prosthesis implantation could be a valid treatment option.

上腕骨遠位端coronal shear fractureに対して関節鏡視下整復固定術を行った1例

上腕骨遠位端coronal shear fractureに対して関節鏡視下整復固定術を行った1例

Surgical Treatment of Comminuted Coronal Shear Fracture of Distal Humerus.

ObjectiveTo investigate the surgical approach, fixation, and clinical effect of comminuted coronal shear fracture of distal humerus.MethodsFrom March 2017 to February 2019, we had used open reduction and internal fixation to treat 19 cases of comminuted distal humeral coronal shear fracture. There were 8 males and 11 females, with an average age of 44.6 years (19–72 years). There were 10 cases on left side and 9 cases on right side. All cases were closed fractures. According to Dubberley's classification, there were six cases of type 1, six cases of type 2, and seven cases of type 3. The lateral Kocher approach, extended Kocher approach, extended Kocher approach combined with a medial incision and the olecranon osteotomy approach were used for exposure. Headless screw, Kirschner wire, and suture were used to fix the fractures. Two cases were fixed with hinged elbow fixators additionally. The follow‐up was evaluated by Mayo Elbow Performance Score (MEPS).ResultsAll patients were followed up for an average of 17.1 months (range, 12 to 30 months). The average time of fracture union was 8.8 ± 1.9 weeks. There were three cases of degenerative osteoarthritis of elbow and one case of heterotopic ossification after operation. A total of 10 patients underwent removal of implants. At the last follow‐up, the elbow flexion‐extension arc was 130.5° ± 10.5°. The forearm rotation arc was 167.4° ± 6.1°. The MEPS was 85.8 ± 8.5, the results were classified as excellent in nine cases, good in eight, and fair in two. The excellent and good rate was 89.5%. The time of fracture union of type 1 was shorter than type 3 (P = 0.024), the elbow flexion‐ extension arc of type 1 fracture was better than type 2 (P = 0.043) and type 3 (P = 0.012), the forearm rotation arc of type 1 fracture was better than type 3 (P = 0.006), the MEPS of type 1 fracture was better than type 2 (P = 0.009) and type 3 (P = 0.002).ConclusionOpen reduction and internal fixation with headless screw, Kirschner wire, and suture can be used for the treatment of comminuted distal humeral coronal shear fractures. The elbow joint function can be restored satisfactorily.

Surgical tips and tricks for coronal shear fractures of the elbow.

Coronal shear fractures of the distal humerus represent an uncommon lesion and could be burdened by high complications. This complex lesion requires an accurate reduction and surgical fixation for a better outcome. Different techniques have been described, however no standard protocol have been proposed. Purpose of this retrospective study, is to evaluate the clinical and radiological outcome with posterior cannulated self-tapping headless screws followed by an early-active-motion protocol and to outline the surgical tips and tricks for different fracture patterns. From 2013 to 2019, a consecutive series of 24 patients with coronal shear fracture undergoing ORIF were included in the study. Fractures were classified according to Dubberley's classification. Cannulated self-tapping headless screws were used to fix the fragments. When necessary, additional cannulated half-threaded screws on the lateral edge of the humerus were used, as well as bone chips and fibrin sealant on severe comminution. All patients underwent an assisted early-active-motion rehabilitation protocol. Mean follow-up was 30months; patients underwent standard X-rays and clinical outcome assessment with range of motion, Broberg and Morrey score and MEPI score. Surgical fixation with headless screw guaranteed complete healing of all shear fractures examined, no loss of reduction were reported. ROM assessment showed good results with an average arc of 113.1°. Excellent to good Broberg-Morrey and MEPI score were reported. No cases of avascular necrosis nor post-traumatic osteoarthritis resulted in our series. Complications occurred in 16.6% of the patients. Coronal shear fracture represents a challenging injury to treat. Anatomical reduction and the use of cannulated self-tapping headless screws from posterior provide a stable fixation, high union rates and good elbow function, with a low cartilage damage and risks of necrosis over 2years of follow-up. Therapeutic III.

Functional Outcome of a Coronal Shear Fracture of the Capitellum Managed by Herbert Screw Fixation Using the Anterolateral Surgical Approach

Fractures of the capitellum, particularly coronal shear fractures, are difficult to manage. The challenges are adequate surgical exposure, proper anatomic reduction, and stable fixation of these fractures. Our study included 10 patients with a coronal shear fracture of the capitellum without any involvement of the posterior condyle. All patients underwent open reduction and Herbert screw fixation using the anterolateral approach, with good functional outcome. In our opinion, this is a good option for the treatment of coronal shear fractures of the capitellum.

Outcomes of treatment for distal humeral fractures including coronal shear fracture

Outcomes of treatment for distal humeral fractures including coronal shear fracture

上腕骨遠位端coronal shear fractureの治療経験

上腕骨遠位端coronal shear fractureの治療経験

肘頭骨折・内側上顆骨折を合併した上腕骨遠位端Coronal Shear Fractureの1例

肘頭骨折・内側上顆骨折を合併した上腕骨遠位端Coronal Shear Fractureの1例

上腕骨遠位端Coronal Shear Fractureの治療成績

上腕骨遠位端Coronal Shear Fractureの治療成績

上腕骨遠位coronal shear fractureの4例

上腕骨遠位coronal shear fractureの4例

An anterior neurovascular interval approach to coronal shear fractures of the distal humerus: a prospective clinical study with short- to mid-term follow-up.

To explore the treatment effect of the anterior medial neurovascular interval approach to coronal shear fractures of the distal humerus. This prospective study included two female patients who were 30-64 years old, with a mean age of 47 years. Fractures were caused by falling from a bicycle. The time between the injury and operation was 1-2 days, with a mean time interval of 1.5 days. Two patients with coronal shear fracture of the distal humerus were treated with open reduction and internal fixation using anterior neurovascular interval approach. There were no intraoperative and postoperative neurological and vascular complications or infections, and the fracture was united. At 12 months after the surgery, the patient returned to work without pain, and with a normal range of motion for elbow and forearm rotation. The X-rays revealed excellent fracture union, no signs of heterotopic ossification, and no traumatic arthritis. According to Mayo's evaluation standards for elbow function, a score of 100 is excellent. The application of the anterior neurovascular interval approach of the elbow in the treatment of shear fracture of the articular surface of the distal humerus, particularly the trochlea of the humerus, can reduce the stripping of the soft tissue.

Management of isolated coronal shear fractures of the humeral capitellum with Herbert screw fixation through anterolateral approach

BackgroundDue to the intraarticular and complex nature of the coronal shear fracture of the humeral capitellum and its rarity, it has been difficult to formulate a universally accepted method of surgical management. The purpose of this study is to retrospectively evaluate the clinical outcomes of 15 patients with isolated coronal shear fractures of the capitellum treated by Herbert screw fixation through anterolateral approach, and to address the safety and tips for this surgical procedure.MethodsThis retrospective study included 15 isolated coronal shear fractures of the capitellum without posterior involvement, which were classified according to the Dubberley classification as 11 type 1A fractures and 4 type 3A fractures. All fractures were treated with Herbert screws fixation via the anterolateral approach. Clinical and radiographic evaluation was performed regularly, with a mean follow-up of 29 months.ResultsThe mean operative time was 81 min. There were no wound healing problems or infection. One incomplete posterior interosseous nerve injury occurred, which recovered soon without residual compromise. All fractures healed well. At the final follow-up, the average range of motion was 134°in flexion-extension and 172°in supination-pronation. There was no significant difference between the affected and the unaffected elbows with regard to motion in flexion-extension or flexion-extension. The average Mayo Elbow Performance Index Score was 93 with 11 excellent and 4 good. No evidence of avascular necrosis, posttraumatic osteoarthritis, or heterotrophic ossification was found.ConclusionOpen reduction and internal fixation using Herbert screws through a anterolateral approach is a reliable and effective treatment for coronal shear fractures of capitellum, and able to achieve stable fixation and restoration of a functional range of motion.