Coronagraphic Low-order Wavefront Sensor Research Articles

The Subaru Coronagraphic Extreme Adaptive Optics System: Enabling High-Contrast Imaging on Solar-System Scales

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a multipurpose high-contrast imaging platform designed for the discovery and detailed characterization of exoplanetary systems and serves as a testbed for high-contrast imaging technologies for ELTs. It is a multiband instrument which makes use of light from 600 to 2500 nm, allowing for coronagraphic direct exoplanet imaging of the inner 3λ/D from the stellar host. Wavefront sensing and control are key to the operation of SCExAO. A partial correction of low-order modes is provided by Subaru’s facility adaptive optics system with the final correction, including high-order modes, implemented downstream by a combination of a visible pyramid wavefront sensor and a 2000-element deformable mirror. The well-corrected NIR (y-K bands) wavefronts can then be injected into any of the available coronagraphs, including but not limited to the phase-induced amplitude apodization and the vector vortex coronagraphs, both of which offer an inner working angle as low as 1λ/D. Noncommon path, low-order aberrations are sensed with a coronagraphic low-order wavefront sensor in the infrared (IR). Low noise, high frame rate NIR detectors allow for active speckle nulling and coherent differential imaging, while the HAWAII 2RG detector in the HiCIAO imager and/or the CHARIS integral field spectrograph (from mid-2016) can take deeper exposures and/or perform angular, spectral, and polarimetric differential imaging. Science in the visible is provided by two interferometric modules: VAMPIRES and FIRST, which enable subdiffraction limited imaging in the visible region with polarimetric and spectroscopic capabilities respectively. We describe the instrument in detail and present preliminary results both on-sky and in the laboratory.

Lyot-based Low Order Wavefront Sensor for Phase-mask Coronagraphs: Principle, Simulations and Laboratory Experiments

High performance coronagraphic imaging of faint structures around bright stars at small angular separations requires fine control of tip, tilt, and other low order aberrations. When such errors occur upstream of a coronagraph they result in starlight leakage, which reduces the dynamic range of the instrument. This issue has been previously addressed for occulting coronagraphs by sensing the starlight before or at the coronagraphic focal plane. One such solution, the coronagraphic low order wave-front sensor (CLOWFS), uses a partially reflective focal plane mask to measure pointing errors for Lyot-type coronagraphs. To deal with pointing errors in low inner working angle phase mask coronagraphs which do not have a reflective focal plane mask, we have adapted the CLOWFS technique. This new concept relies on starlight diffracted by the focal plane phase mask being reflected by the Lyot stop towards a sensor which reliably measures low order aberrations such as tip and tilt. This reflective Lyot-based wavefront sensor is a linear reconstructor which provides high sensitivity tip-tilt error measurements with phase mask coronagraphs. Simulations show that the measurement accuracy of pointing errors with realistic post adaptive optics residuals are ≈10-2λ/D per mode at λ = 1.6 μm for a four quadrant phase mask. In addition, we demonstrate the open loop measurement pointing accuracy of 10-2λ/D at 638 nm for a four quadrant phase mask in the laboratory.

Coronagraphic Low-Order Wavefront Sensor: Postprocessing Sensitivity Enhancer for High-Performance Coronagraphs

ABSTRACTDetection and characterization of exoplanets by direct imaging requires a coronagraph designed to deliver high-contrast at small angular separation. To achieve this, an accurate control of low-order aberrations, such as pointing and focus errors, is essential to optimize coronagraphic rejection and avoid the possible confusion between exoplanet light and coronagraphic leaks in the science image. Simulations and laboratory prototyping have shown that a coronagraphic low-order wavefront sensor (CLOWFS), using a single defocused image of a reflective focal-plane ring, can be used to control tip-tilt to an accuracy of 10-3 λ/D. This article demonstrates that the data acquired by CLOWFS can also be used in postprocessing to calibrate residual coronagraphic leaks from the science image. Using both the CLOWFS camera and the science camera in the system, we quantify the accuracy of the method and its ability to successfully remove light due to low-order errors from the science image. We also report the implementation and performance of the CLOWFS on the Subaru Coronagraphic Extreme-AO (SCExAO) system and its expected on-sky performance. In the laboratory, with a level of disturbance similar to that encountered in a post-AO beam, CLOWFS postprocessing has achieved speckle calibration to 1/300 of the raw speckle level. This is about 40 times better than could be done with an idealized PSF subtraction that does not rely on CLOWFS.

CORONAGRAPHIC LOW-ORDER WAVE-FRONT SENSOR: PRINCIPLE AND APPLICATION TO A PHASE-INDUCED AMPLITUDE CORONAGRAPH

High contrast coronagraphic imaging of the immediate surrounding of stars requires exquisite control of low-order wavefront aberrations, such as tip-tilt (pointing) and focus. We propose an accurate, efficient and easy to implement technique to measure such aberrations in coronagraphs which use a focal plane mask to block starlight. The Coronagraphic Low Order Wavefront Sensor (CLOWFS) produces a defocused image of a reflective focal plane ring to measure low order aberrations. Even for small levels of wavefront aberration, the proposed scheme produces large intensity signals which can be easily measured, and therefore does not require highly accurate calibration of either the detector or optical elements. The CLOWFS achieves nearly optimal sensitivity and is immune from non-common path errors. This technique is especially well suited for high performance low inner working angle (IWA) coronagraphs. On phase-induced amplitude apodization (PIAA) type coronagraphs, it can unambiguously recover aberrations which originate from either side of the beam shaping introduced by the PIAA optics. We show that the proposed CLOWFS can measure sub-milliarcsecond telescope pointing errors several orders of magnitude faster than would be possible in the coronagraphic science focal plane alone, and can also accurately calibrate residual coronagraphic leaks due to residual low order aberrations. We have demonstrated 1e-3 lambda/D pointing stability in a laboratory demonstration of the CLOWFS on a PIAA type coronagraph.