Corneal Biomechanical Parameters Research Articles

Age-related analysis of corneal biomechanical parameters in healthy Chinese individuals

To report the correlation between corneal biomechanical parameters and age in healthy Chinese individuals. This cross-sectional study was conducted on 864 eyes of 543 healthy participants. A comprehensive ophthalmic examination and corneal biomechanics examination using Corneal Visualization Scheimpflug Technology (Corvis ST) were conducted. Based on age, all participants were further divided into five age groups (n) as follows: group A, 11–20 years (105); group B, 21–30 years (112); group C, 31–40 years (113); group D, 41–50 years (100); and group E, > 50 years (113). Using Corvis ST, we examined 35 corneal biomechanical parameters and compared them across the different age groups. Spearman’s correlation coefficients and stepwise multivariate linear regression models were used to investigate whether the corneal biomechanical parameters were related to demographic and ocular characteristics. A correlation analysis between the left and right eyes revealed that 13 parameters were significantly associated with eye differences. Among the 35 corneal biomechanical parameters, 28 exhibited significant differences across the age groups, with stiffness parameter at applanation 1(SPA1) showing an upward trend after the age of 30 and stress–strain index (SSI) demonstrates a statistically significant upward trend when comparing the five age groups in the study. Additionally, Spearman’s correlation analysis and stepwise multivariate linear regression analysis revealed that 11 corneal biomechanical parameters were positively correlated with age and 10 were negatively correlated with age. Corvis biomechanical index (CBI) was significantly negatively correlated with intraocular pressure (IOP) and central corneal thickness (CCT), SSI was significantly positively correlated with age and IOP, and SPA1 were positively correlated with IOP and CCT. In conclusion, most corneal biomechanical parameters showed a significant correlation with age, with corneal stiffness progressively increasing alongside advancing age, IOP, or CCT.

Corneal biomechanical properties and potential influencing factors in varying degrees of myopia

To compare the corneal biomechanical parameters measured by Corvis ST in subjects with varying degrees of myopia. And the factors that may affect corneal biomechanical properties were also investigated. Participants in this prospective cross-sectional study were classified into three groups according to spherical equivalent (SE) and axial length (AL): Non-myopia (NM, SE > − 0.50 D and AL < 26 mm), Mild-to-moderate myopia (MM, − 6.00 D < SE ≤ − 0.50 D and AL < 26 mm), high myopia (HM, SE ≤ − 6.00 D or AL ≥ 26 mm). Ten corneal biomechanical parameters were finally included. Linear mixed-effects model accounting for using both eyes in the same participant was carried out to evaluate how the corneal biomechanical parameter was influenced by varying degrees of myopia after adjusting for biomechanically corrected intraocular pressure (bIOP) and central corneal thickness (CCT). Further, multiple linear regression was performed to explore the correlation between corneal biomechanical parameter and SE, AL, bIOP or CCT. A total of 304 eyes from 224 healthy myopic subjects were recorded. There were 95 eyes with NM, 122 eyes with MM, and 87 eyes with HM. After adjusting for bIOP and CCT, eyes with high myopia showed shorter highest concavity time (HC-time, p = 0.025), greater peak distance (PD, p = 0.001), greater deflection amplitude (DA-Max, p = 0.002), smaller whole eye movement (WEM-Max, p < 0.001) and reduced stiffness parameter (SP-A1, p < 0.001). Multiple regression analysis showed that five parameters (HC-time, p < 0.001; PD, p < 0.001; DA-Max, p = 0.001; WEM-Max, p < 0.001; and SP-A1, p < 0.001) of Corvis ST were significantly correlated with AL, and one parameter (Corvis biomechanical index, p = 0.016) has significant relationship with SE. With the increase of myopia, significant changes in several corneal biomechanical parameters indicated a progressive decrease in corneal stiffness, independent of bIOP and CCT. Corneal biomechanical parameters may be predictors of scleral mechanical strength in high myopia, which has certain application value in clinical management of myopia.

The Impact of Intraocular Pressure Changes on Corneal Biomechanics in Primary Open-angle Glaucoma: IOP Changes Impact on Corneal Biomechanics in POAG

PurposeTo investigate the relationship between intraocular pressure (IOP) changes and corneal biomechanical properties, determine the quantitative relationship between IOP changes and corneal biomechanical properties in patients with glaucoma and observe the differences among different types of glaucoma when the effects of high-level IOP were excluded. DesignProspective clinical cohort study. MethodsSetting: Institutional. Patients: Treatment-naive patients with primary open-angle glaucoma or ocular hypertension (OHT) were included. Observation Procedures: IOP was measured using a Goldmann applanation tonometer. Corneal biomechanics were evaluated using a corneal indentation device and corneal visualization Scheimpflug technology. Medication therapy was used for IOP reduction. Repeated measurements were taken at the baseline visit and each week thereafter within a month. Paired t tests were used to compare IOP and corneal biomechanical metrics before and after IOP-lowering therapy. One-way analysis of variance was employed to investigate potential differences across groups, with a Bonferroni post hoc correction administered for multiple intergroup comparisons. Main Outcome Measures: Corneal biomechanical parameters following IOP changes. ResultsEighty-one participants (mean age, 41.63 ± 17.33 years) were included in this study. The cohort comprised 20 patients with normal-tension glaucoma (NTG), 47 with high-tension glaucoma (HTG), and 14 with OHT. The baseline corneal stiffness (88.58±18.30 N/m) and corneal modulus (0.71±0.16 MPa) were greater than the post-IOP reduction values (67.15±9.24 N/m and 0.54±0.08 MPa, respectively; P<0.001). The relationships between changes in IOP and changes in corneal biomechanical parameters were Δ corneal stiffness=2.06*ΔIOP+6.47 (P<0.001) and Δ corneal modulus=0.017*ΔIOP+0.051 (P<0.001). After IOP reduction, the mean corneal stiffness at the 4th week in the NTG group was significantly lower (60.97±6.36 N/m) than that in the HTG (67.25±9.01 N/m) and OHT (75.62±6.52 N/m, P < 0.001) groups. Additionally, the stiffness of HTG patients was lower than that of OHT patients (P = 0.003). ConclusionsChanges in IOP have an impact on corneal biomechanical parameters. Decreases in corneal stiffness and modulus were observed after IOP reduction. When the effect of high-level IOP was excluded, corneal biomechanics varied according to the type of glaucoma. The HTG corneas were softer than the OHT corneas, and the NTG corneas were even softer.

Assessment of the Corneal Biomechanical Features of Sturge-Weber Syndrome Using Dynamic Ultrahigh-speed Scheimpflug Imaging.

To evaluate the corneal biomechanical characteristics of eyes with Sturge-Weber syndrome (SWS) secondary glaucoma (SSG) by analyzing corneal biomechanical parameters obtained using the Corneal Visualization Scheimpflug Technology instrument (Corvis ST). In patients with SWS, eyes affected by SSG were designated as the SSG group while the contralateral eyes were designated as the SWS contralateral group (SC group). Patients from the myopia clinic served as the control group. Dynamic corneal response parameters (DCRs) including the stress-strain index (SSI)-a critical material stiffness parameter that excludes interference from IOP and central corneal thickness (CCT)-were analyzed. For CCT, no significant difference was observed between the SSG and SC groups. However, significant differences were found between the SSG and control groups and between the SC and control groups. Parameters such as HC Time, A1 Deformation Amp., A2 Deformation Amp., length of Whole Eye Movement (WEM), DA Ratio Max (2 mm), PachySlope, DA Ratio Max (1 mm), and ARTh showed significant differences between the SSG group and control group. In the SSG group, 4 of night eyes had an SSI of less than 0.85. Some DCRs indicated a stiffer cornea in the SSG group, possibly due to a thicker cornea in this group. On analyzing SSI, it was found that corneal material properties change, becoming less stiff in some of the patients with SSG. In conclusion, our study provides a preliminary exploration of the biomechanical properties of SWS secondary glaucoma.

Combined corneal biomechanical and tomographical indices in subclinical and forme fruste keratoconus.

Evaluation of combined corneal tomographic and biomechanical parameters in subclinical/forme fruste keratoconus (ScKC/FFKC). Cross-sectional observational case-control study. Thirty-one eyes with ScKC (fellow eye of KC with any one sign keratometry >47 diopters, cylinder >1.5 D, central corneal thickness <500 μm, with/without abnormal topography) or FFKC (fellow eye of KC with normal topography and slit lamp examination) >13 years (cases) and 44 eyes of age-matched 22 healthy subjects (controls). Clinically diagnosed KC, presence of corneal scars, and prior ocular surgery eyes. Sixteen Pentacam, 15 Corvis ST, and five Sirius parameters were analyzed using paired sample t-test, and a subsample found to be significantly different was used in receiver operating characteristic curve analysis. The Youden index was calculated, and Pearson's correlation analysis was done. Five Pentacam, three Corvis ST, and two Sirius parameters had an area under curve (AUC) >0.75. Tomographic and biomechanical index (TBI) (cutoff 0.59, 95% specificity, 77% sensitivity), Belin Ambrosio enhanced ecstasia display (cutoff 1.8, 81% specificity, 80% sensitivity), and symmetry index of posterior corneal curvature (cutoff 0.16, 97% specificity, 67% sensitivity) best identified early KC. TBI strongly correlated with maximum Pentacam parameters in both cases and controls. Corvis biomechanical index strongly correlated only in cases, and SP-A1-SD weakly correlated in cases. Upon combined analysis, the average sensitivity and specificity, respectively, of top three parameters (according to AUC) from Pentacam and Corvis ST were 74.1% and 95.4% for posterior elevation and TBI. A trial was registered in Clinical Trial Registry of India on January 28, 2022. The Trial Registration Number is REF/2022/01/050638.

Early elastic and viscoelastic corneal biomechanical changes after photorefractive keratectomy and small incision lenticule extraction.

To compare early changes in the corneal biomechanical parameters after photorefractive keratectomy (PRK) and small incision lenticule extraction (SMILE) and their correlations with corneal shape parameters. One hundred twenty four eyes received myopic PRK and SMILE for similar amounts of myopia. Corneal tomography with Pentacam HR, biomechanical parameters using Corvis ST, and Ocular Response Analyzer (ORA) were evaluated before and 2weeks after surgery. The change in each parameter was compared between groups, while the difference in central corneal thickness and cornea-compensated intraocular pressure measured before and after surgery were considered as covariates. A significant reduction was seen in the corneal stiffness parameter at first applanation, and an increase in deformation amplitude ratio (DAR), and integrated inverse radius (IIR) in both groups after surgery (p < 0.001) Changes in DAR, and IIR were significantly greater in the SMILE than in the PRK group (p < 0.001) Corneal hysteresis (CH) and corneal resistance factor(CRF) decreased in both SMILE and PRK groups after surgery, (p < 0.001) with no statistically significant difference between groups (p > 0.05) Among new Corvis ST parameters, DAR showed a significant correlation with changes in Ambrosio relational thickness in both groups (p < 0.05). Both techniques caused significant changes in corneal biomechanics in the early postoperative period, with greater elastic changes in the SMILE group compared to the PRK group, likely due to lower tension in the SMILE cap and thinner residual stromal bed in SMILE. There were no differences in viscoelastic changes between them, so the lower CH may reflect the volume of tissue removed.

Keratoconus and Corneal Ectasia with Relatively Low Keratometry.

The study aims to demonstrate and estimate the prevalence of clinical corneal ectasia and keratoconus (KC) in patients with relatively low keratometry (low-K KC). In a retrospective, analytical, and non-interventionist study, one eye was randomly selected from 1054 patients from the original Tomographic Biomechanical Index (TBIv1) study and the external validation (from Rio de Janeiro, Brazil, and Milan, Italy clinics). Patients were stratified into three groups. Group1 included 736 normal patients, and groups 2 and 3 included 318 patients with clinical KC in both eyes, divided into low-K KC (90 patients) and high-K KC (228 patients), respectively. All patients underwent a comprehensive ophthalmological evaluation along with Pentacam and Corvis ST (Oculus, Wetzlar, Germany) examinations. Cases with maximum mean zone 3mm keratometry (Kmax zone mean 3mm) lower than 47.6diopters (D) were considered as low-keratometry keratoconus, and cases with Kmax zone mean 3mm higher than 47.6D were regarded as high-keratometry keratoconus. Ninety (28.30%) of the 318 KC group presented ectasia with low-keratometric values (low-Kmax). The average age in the normal group was 39.28years (range 6.99-90.12), in the low-Kmax KC group it was 37.49 (range 13.35-78.45), and in the high-Kmax KC group it was 34.22years (range 12.7-80.34). Mean and SD values and median (range), respectively, of some corneal tomographic and biomechanical parameters evaluated from the low-Kmax KC group were as follows: Belin-Ambrósio enhanced ectasia display (BAD-D) 3.79 ± 1.62 and 3.66 (0.83-9.73); Pentacam random forest index (PRFI) 0.78 ± 0.25 and 0.91 (0.05-1); corneal biomechanical index (CBI) 0.58 ± 0.43 and 0.75 (0-1); TBI 0.93 ± 0.17 and 1 (0.35-1); and stiffness parameter at A1 (SP-A1) 86.16 ± 19.62 and 86.05 (42.94-141.66). Relatively low keratometry, with a Kmax lower than 47.6D, can occur in up to 28.30% of clinical keratoconus. These cases have a less severe presentation of the disease. Future studies involving larger populations and prospective designs are necessary to confirm the prevalence of keratoconus with low keratometry and define prognostic factors in such cases.

Biomechanical changes after keratorefractive lenticule extraction with CLEAR and after femtosecond LASIK, correlated with optical coherence tomography findings

The aim of this retrospective, comparative, single-eye study was to assess the biomechanical changes after laser correction of myopia by keratorefractive lenticule extraction (KLEx) and by femtosecond LASIK (FS-LASIK), correlating them with the stromal changes on anterior segment optical coherence tomography. Corneal biomechanical parameters, provided by the high-speed Scheimpflug camera CorVis-ST (Oculus Optikgeräte GmbH) and measured pre-operatively and 1 week post-operatively, were: stiffness parameter at first applanation (SP-A1), stress-strain index (SSI), inverse integrated radius (IIR), deformation amplitude ratio at 2 mm (DA ratio-2mm). A total of 79 eyes undergone KLEx (CLEAR, Ziemer Group) and 93 eyes undergone FS-LASIK were included. The mean residual stromal bed (RSB) was 271.36±17.22 µm after KLEx and 304.21±21.82 µm after FS-LASIK (p=0.00). All parameters in both groups showed statistically significant post-operative changes (p=0.00), except for SSI after FS-LASIK (p=0.39). The percent changes in all parameters were significantly higher in the KLEx group. Even in the eyes with equal RSB (300±5 µm; 19 eyes post-KLEx, 26 eyes post-FS-LASIK), changes were significantly higher after KLEx (SP-A1: -35.9%; SSI: -6.7%) than after FS-LASIK (SP-A1: -29.6%; SSI: -3.8%) (respectively, p=0.02, and p=0.00). In KLEx, reduction in stromal thickness had a weak correlation with reduction in SP-A1 (r=0.39), and poor correlation with reduction in SSI (r=0.26). In conclusion, stiffness parameters were significantly worse after KLEx than after FS-LASIK, even in eyes ending with similar RSB. These findings should be valued cautiously, as the CorVis-ST might not capture all the clinically significant alterations, especially in the post-KLEx bi-layered cornea.

The Effect of Diabetic Retinopathy and Blood Glucose Regulation on Corneal Biomechanical Parameters

Purpose The aim of this study was to evaluate the effects of different stages of diabetic retinopathy (DR) and metabolic control of blood glucose levels on corneal biomechanical parameters. Methods Diabetic patients were categorized into three groups: no DR group, nonproliferative DR (NPDR) group, and proliferative DR (PDR) group. Of the 141 eyes examined, 40 belonged to the control group, 34 to no DR group, 34 to NPDR group, and 33 to PDR group. Using an Ocular Response Analyzer to measure corneal hysteresis (CH), corneal resistance factor (CRF), Goldmann-correlated intraocular pressure (IOPg), and corneal-compensated IOP (IOPcc). IOP was assessed using a Tono-Pen, while central corneal thickness (CCT) was determined using an ultrasonic pachymeter. HbA1c levels were also recorded. We conducted comparisons among these groups across biomechanical parameters and IOP (tonopen), and CCT, while also investigating the impact of HbA1c levels on these parameters. Results Among any groups show a statistically significant difference in CCT, IOP (tonopen), CH, CRF, IOPg, and IOPcc. In diabetic patients, CRF, CTT, and IOPg values were significantly higher in those with HbA1c levels ≥ 7 mg/dl than in those with HbA1c levels < 7 mg/dl (p = 0.009, p = 0.013, p = 0.038), respectively, while there was no statistically significant difference in IOPcc, CH, and IOP (tonopen). Linear regression analysis showed that CH was positively associated with CCT (p < 0.001) and negatively associated with IOPcc (p < 0.001), while CRF was positively associated with CCT (p < 0.001), HbA1c (p < 0.05), and negatively associated with diagnosis of DR (p < 0.05). Conclusion This study underscores the influence of metabolic control, as reflected by HbA1c levels, on corneal biomechanical parameters in diabetic patients, emphasizing the importance of monitoring and managing glycemic control in this population.

Corneal biomechanics and their association with severity of lens dislocation in Marfan syndrome.

To investigate corneal biomechanical properties and its associations with the severity of lens dislocation in patients with Marfan syndrome. A total of 30 patients with Marfan syndrome and 30 age-, sex- and axial length (AL)-matched controls were recruited. Corneal biomechanical parameters of both groups were measured by CorVis ST and were compared between groups. Potential associations between corneal biomechanical parameters and severity of lens dislocation were also investigated. Lower applanation 1 velocity (A1V) (0.13 ± 0.004 vs. 0.15 ± 0.003, P = 0.016), shorter applanation 2 time (A2T)(22.64 ± 0.11 vs. 22.94 ± 0.11, P = 0.013), longer peak distance (PD) (5.03 ± 0.07 vs. 4.81 ± 0.05, P = 0.008), longer radius (R) of highest concavity (7.44 ± 0.16 vs. 6.93 ± 0.14, P = 0.012), greater Ambrosio relational thickness horizontal (ARTh) (603 ± 20 vs. 498 ± 12, P < 0.001), and integrated radius (IR) (8.32 ± 0.25 vs. 8.95 ± 0.21, P = 0.033) were detected among Marfan eyes compared with controls (all P < 0.05). Marfan individuals with more severe lens dislocation tended to have increased stiffness parameter as longer A1T, slower A1V, shorter A2T, slower application 2 velocity (A2V), smaller PD and smaller Distance Amplitude (DA) (P < 0.05). Marfan patients were detected to have increased corneal stiffness compared with normal subjects. Corneal biomechanical parameters were significantly associated with the severity of lens dislocation in Marfan patients.

Stromal lenticule addition keratoplasty with corneal crosslinking for corneal ectasia secondary to FS-LASIK: a case series.

To explore the clinical efficacy and safety of stromal lenticule addition keratoplasty (SLAK) with corneal crosslinking (CXL) on patients with corneal ectasia secondary to femtosecond laser-assisted in situ keratomileusis (FS-LASIK). A series of 5 patients undertaking SLAK with CXL for the treatment of corneal ectasia secondary to FS-LASIK were followed for 4-9mo. The lenticules were collected from patients undertaking small incision lenticule extraction (SMILE) for the correction of myopia. Adding a stromal lenticule was aimed at improving the corneal thickness for the safe application of crosslinking and compensating for the thin cornea to improve its mechanical strength. All surgeries were conducted successfully with no significant complications. Their best corrected visual acuity (BCVA) ranged from 0.05 to 0.8-2 before surgery. The pre-operational total corneal thickness ranged from 345-404 µm and maximum keratometry (Kmax) ranged from 50.8 to 86.3. After the combination surgery, both the corneal keratometry (range 55.9 to 92.8) and total corneal thickness (range 413-482 µm) significantly increased. Four out of 5 patients had improvement of corneal biomechanical parameters (reflected by stiffness parameter A1 in Corvis ST). However, 3 patients showed decreased BCVA after surgery due to the development of irregular astigmatism and transient haze. Despite the onset of corneal edema right after SLAK, the corneal topography and thickness generally stabilized after 3mo. SLAK with CXL is a potentially beneficial and safe therapy for advanced corneal ectasia. Future work needs to address the poor predictability of corneal refractometry and compare the outcomes of different surgical modes.

Characterization of Corneal Biomechanics Using CORVIS ST Device in Different Grades of Myopia in a Sample of Middle Eastern Ethnicity.

To characterize corneal biomechanical properties using the CORVIS-ST device in myopic individuals. This prospective cross-sectional study included patients with myopia. Our study included 154 eyes of 154 myopic patients aged between 18 and 40 years, with stable refraction for at least 2 years. A full ophthalmological examination and corneal tomography were performed using a Pentacam HR device. Corneal biomechanical parameters were assessed using the CORVIS-ST device in mild, moderate, severe, and extreme myopia groups. Statistically significant differences were observed in the DA ratio (p = 0.033), SP-A (p=0.009), CBI (p=0.041), SSI (p=0.000), and Peak distance (p = 0.032). In correlation with different Corvis ST biomechanical variables, SE was found to be correlated with DA ratio(r=-0.191, p=0.018), SP-A(r=0.199, p=0.013) and SSI(r=-0.336, p=0.000), while in multiple regression analysis, SE was found to be independently correlated with SSI and peak distance(p=0.036,0.038 respectively) while the grade of myopia was found to be independently correlated with SP-A(p=0.034). SSI, Peak distance, and SP-A were independently related to SE and myopia grade, confirming the hypothesis that eyes with higher myopia are more deformable and less stress resistant.

Comparison of corneal biomechanical parameters in healthy corneas with symmetric and asymmetric bow-tie topographic pattern with inferior and superior steepening.

To compare the corneal biomechanical parameters in healthy corneas with symmetric and asymmetric bow-tie topographic patterns. In this cross-sectional study, 144 eyes were divided based on inferior-superior asymmetry value (I-S) into symmetric (zero I-S: - 0.50 to + 0.50 D) and asymmetric bow-tie topographic patterns with inferior (positive I-S: + 0.51 to + 1.4 D) or superior (negative I-S: - 2.5 to - 0.51 D) steepening. The biomechanical assessment was performed using Corvis ST and ocular response analyzer (ORA). A general linear model univariate analysis was used to compare the parameters, while the central corneal thickness, intraocular pressure, and age were considered covariates. Only the peak distance (PD) at the highest concavity phase (P = 0.007) and tomographic biomechanical index (TBI, P = 0.001) showed statistically significant differences between the three groups. For TBI, this difference was statistically significant between the positive I-S group separately with the zero I-S group (P < 0.001), and with the negative I-S group (P = 0.022). For PD, the significant difference was between the negative I-S group separately with zero I-S (P = 0.019), and positive I-S groups (P = 0.018). There was a statistically significant correlation between the I-S value with PD (r = 0.281, P = 0.001) and TBI (r = 0.170, P = 0.044). Most corneal biomechanical parameters are not statistically significant compared to the zero I-S group. However, superior steepening is associated with a stiffer response based solely on the shorter PD values seen in this group, and the group with the inferior steepening shows the highest or more suspicious values based on TBI.

Intraocular pressure measurement and association with corneal biomechanics in patients underwent Descemet's stripping with endothelial keratoplasty: a comparative study.

To compare corneal biomechanical properties and intraocular pressure (IOP) measurements in patients who underwent Descemet's stripping with endothelial keratoplasty (DSEK) with those of the follow healthy eyes. In this retrospective comparative study, a total of 35 eyes of 35 patients who underwent DSEK by a single surgeon from 2015.02 to 2019.12 were enrolled along with their fellow healthy eyes. Corneal biomechanical parameters were assessed at least 3 months post-DSEK using Corneal Visualization Scheimpflug Technology (CST). IOP was measured by CST, Goldmann applanation tonometry (GAT), and MacKay-Marg tonometer. Central corneal thickness (CCT) and stiffness parameter at first applanation (SP-A1) were significantly increased after DSEK when compared to the fellow eyes. In DSEK eyes, biomechanically-corrected intraocular pressure (bIOP) and MacKay-Marg IOP correlated significantly with GAT IOP measurements, with bIOP showed the lowest IOP values. All the IOP values did not correlate with CCT. However, GAT-IOP and MacKay-Marg IOP showed a positive correlation with SP-A1. The corneal stiffness increased after DSEK. Central corneal thickness may have less influence than corneal biomechanics on IOP measurements in eyes after DSEK. Biomechanically-corrected IOP obtained by CST seemed to be lower than other tonometry techniques in DSEK eyes, perhaps because of correction for corneal stiffness, CCT and age.

Features of the Biomechanical Parameters of the Fibrous Capsule of the Eye in Patients after Radial Keratotomy

Objective: to identify the features of biomechanical parameters of the fibrous capsule of the eye in patients after radial keratotomy (RK). Materials and methods. 87 eyes were examined after radial keratotomy, the average age was 59.8 ± 0.83 years. With glaucoma 47 eyes, without — in 40 eyes. Patients were divided into three groups: 17 eyes with a central corneal thickness (CCT) of less than 530 microns; 30 eyes with a CCT of 530–580 microns; 40 eyes with a CCT of more than 580 microns. The control group consists of myopic patients without glaucoma, without PES, over 45 years old. Corneal tomography and biomechanical parameters were measured using Pentacam (Oculus) and CorVis ST, respectively. Results. in the eyes after RK, the corneal stiffness (DA ratio, R) is higher in comparison with the control and increases with an increase in CCT. The stiffness of the fibrous capsule of the eye (SP-A1) after RK is reduced in comparison with the control and increases with an increase in CCT. The SSI analysis showed a higher stiffness of the eyeball than in the control, regardless of the CCT. BGF is higher in the eyes after RK compared to the control with the maximum value for thin corneas. Hyperopic shift (HS) after RK is distinctive for eyes with glaucoma. With a CCT of more than 580 microns, HS is a clinical glaucoma detector, with thin corneas, it is not. Conclusion. The eye after RC is characterized by an increase in the stiffness of the cornea, a decrease in the stiffness of the fibrous capsule of the eye, a general increase in the stiffness of the eyeball and HS.

Biomechanical properties of cornea and ocular aberrations in myopic eyes.

To study the correlation of corneal topography, corneal biomechanical properties, and ocular aberrations with the magnitude of refractive error in myopic eyes. All myopic patients attending the clinic for refractive surgery were recruited. Data recorded included visual acuity, axial length (AL), central corneal thickness (CCT), manifest refraction spherical equivalent (MRSE), topography (Pentacam - Oculus), corneal biomechanical factors [ocular response analyzer (ORA)], and optical aberrations (iTrace). They were further categorized into group 1 (suitable for femto-LASIK) and group 2 (unsuitable for femto-LASIK). Sixty eyes (30 myopes) of mean age 22.78 ± 2.71 years were enrolled. A negative correlation of refractive error was noted with AL (ρ = -0.9; P < 0.001), total aberrations (ρ = 0.53; P < 0.001), and lower-order aberrations (LOA) (ρ = 0.54; P < 0.001). A strongly positive correlation was noted between CCT and corneal hysteresis (CH) (ρ = 0.63; P < 0.001), CCT and CRF (ρ = 0.56; P < 0.001), CH and corneal resistance factor (CRF) (ρ = 0.83; P < 0.001), and Goldmann equivalent intraocular pressure (IOPg) and corneal compensated intraocular pressure (IOPcc) (ρ = 0.78; P < 0.001). An increase in higher-order aberrations (HOAs) as well as lower-order aberrations (LOAs) was noted with increasing sim-K [HOA (r = 0.73, P = 0.001); LOA (r = 0.601, P = 0.014)] and increasing CRF [HOA (r = 0.5, P = 0.006); LOA (r = 0.732, P = 0.001)] in group 2. The amount of refractive error, axial length, central corneal thickness, and sim-K were significantly different in the two groups. Increasing degree of myopia is associated with an increase in axial length, total aberrations, and lower-order aberrations. Corneal biomechanical parameters have a strong correlation with each other. Lower corneal biomechanics are noted in high myopes as they have weaker and thinner corneas. Corneal biomechanics and ocular aberrations do not differ significantly between cases suitable for femto-LASIK and cases unsuitable for femto-LASIK.

Machine learning analysis with the comprehensive index of corneal tomographic and biomechanical parameters in detecting pediatric subclinical keratoconus.

Background: Keratoconus (KC) occurs at puberty but diagnosis is focused on adults. The early diagnosis of pediatric KC can prevent its progression and improve the quality of life of patients. This study aimed to evaluate the ability of corneal tomographic and biomechanical variables through machine learning analysis to detect subclinical keratoconus (SKC) in a pediatric population. Methods: Fifty-two KC, 52 SKC, and 52 control pediatric eyes matched by age and gender were recruited in a case-control study. The corneal tomographic and biomechanical parameters were measured by professionals. A linear mixed-effects test was used to compare the differences among the three groups and a least significant difference analysis was used to conduct pairwise comparisons. The receiver operating characteristic (ROC) curve and the Delong test were used to evaluate diagnostic ability. Variables were used in a multivariate logistic regression in the machine learning analysis, using a stepwise variable selection to decrease overfitting, and comprehensive indices for detecting pediatric SKC eyes were produced in each step. Results: PE, BAD-D, and TBI had the highest area under the curve (AUC) values in identifying pediatric KC eyes, and the corresponding cutoff values were 12μm, 2.48, and 0.6, respectively. For discriminating SKC eyes, the highest AUC (95% CI) was found in SP A1 with a value of 0.84 (0.765, 0.915), and BAD-D was the best parameter among the corneal tomographic parameters with an AUC (95% CI) value of 0.817 (0.729, 0.886). Three models were generated in the machine learning analysis, and Model 3 (y = 0.400*PE + 1.982* DA ratio max [2mm]-0.072 * SP A1-3.245) had the highest AUC (95% CI) value, with 90.4% sensitivity and 76.9% specificity, and the cutoff value providing the best Youden index was 0.19. Conclusion: The criteria of parameters for diagnosing pediatric KC and SKC eyes were inconsistent with the adult population. Combined corneal tomographic and biomechanical parameters could enhance the early diagnosis of young patients and improve the inadequate representation of pediatric KC research.

Comparison of errors in ablation depth calculation after myopic femtosecond laser in situ keratomileusis in patients with different degrees of myopia: a prospective study

BackgroundTo investigate the difference between the predicted preoperative corneal ablation depth and the measured ablation depth for femtosecond laser in situ keratomileusis (FS-LASIK) in patients with different degrees of myopia, and to analyze the source of the difference.MethodsA total of 55 patients (109 eyes) were included in this study. Multiple logistics regression was applied to analyze the sources affecting postoperative refractive outcomes. The difference between the preoperative predicted corneal ablation depth and the 1-day postoperative ablation depth in patients with different degrees of myopia was explored using linear regression. Corneal biomechanical parameters influencing error in ablation depth calculation were examined using multiple linear regression.ResultsOne hundred and nine eyes were divided into low to moderate myopia (55 eyes, myopia of 6 D or less), high myopia (45 eyes, myopia ranging from 6 D to a maximum of 9 D), and very high myopia group (9 eyes, myopia greater than 9 D) based on preoperative refractive error (spherical equivalent). Postoperative visual outcomes were comparable among the three groups of patients, with no significant difference in uncorrected visual acuity (UCVA). We did find notable disparities in spherical equivalent (SE) and central corneal thickness (CCT) in patients with different degrees of myopia at 1 day postoperatively (all p < 0.001). Logistic regression analysis showed that error in ablation depth calculation was an independent risk factor for refractive outcomes one day after surgery (OR = 1.689, 95% CI: 1.366 – 2.089). There was a substantial discrepancy in error in ablation depth calculation at 1 day postoperatively between the three groups. The measured ablation depth of the laser platform was lower than the predicted ablation depth in the low to moderate myopia and very high myopia groups, but the opposite was true in the high myopia group. Pre-operative SE (p < 0.001) and corneal front minimum radius of curvature (Front Rmin) (p = 0.007) obviously influenced the error in ablation depth calculation.ConclusionsError in ablation depth calculation values vary significantly between patients with different degrees of myopia and correlate highly with preoperative SE and Front Rmin. At the same time, the available evidence suggests that error in ablation depth calculation is an influential factor in postoperative refractive status, so it is imperative to control error in ablation depth calculation.

The corneal biomechanical differences after wearing orthokeratology lenses and multifocal soft lenses in children: A self-control study

BackgroundTo compare the changes in corneal biomechanics after orthokeratology (OK) lens and Defocus Incorporated Soft Contact (DISC) lens treatment. MethodsOf 28 myopic children were recruited, with one eye wearing OK lens and the other eye wearing DISC lens for one year, and the data after discontinued for 4 weeks were also collected. Major outcomes were corneal biomechanics and axial length (AL) elongation. ResultsThroughout the follow-up period, the DISC group had longer the first applanation (A1) time, larger A1 deformation amplitude, A1 deflection length (A1 DLL), and A1 deflection amplitude than the OK group. AL elongation was less in the OK group at each visit (all P < 0.05) but faster in the OK group than in the DISC group after discontinuation (P = 0.006). Moreover, AL elongation was related to baseline A1 time, A1 velocity and whole eye movement max in the DISC group, and in the OK group, was related to the baseline the second applanation (A2) DLL, A2 delta arc length and stiffness parameter A1 (all P < 0.05). ConclusionsThe cornea was more deformable after wearing DISC lens than OK lens, and corneal biomechanical parameters were associated with AL elongation. Eyes showed less AL elongation during OK lens treatment while faster AL elongation after discontinuation than DISC lens. The baseline corneal biomechanics may help to predict AL elongation in myopic control strategies.

Implantation of Intracorneal Ring Segments in Keratectasia: Effects on Corneal Biomechanics in 112 Eyes.

The aim of this study was to analyze changes in corneal biomechanical properties after implantation of intracorneal ring segments (ICRSs) in keratectasia. This retrospective single-center study included 112 patient eyes that underwent femtosecond laser-assisted ICRS implantation (Intacs SK; Addition Technology Inc, Des Plaines, IL) for keratectasia. Biomechanical analysis was performed using the Ocular Response Analyzer (ORA; Reichert Inc, Depew, NY), with determination of corneal resistance factor, corneal hysteresis, and Keratoconus Match Index, as well as by Corvis ST (OCULUS, Wetzlar, Germany), with determination of stiffness parameter A1, Ambrosio relational thickness to the horizontal profile (Arth), integrated radius, deformation amplitude ratio, and stress-strain index as well as Corvis Biomechanical Index and Tomographic Biomechanical Index. Data collection was performed preoperatively and 6 months postoperatively for ORA and Corvis ST and additionally after 1 and 2 years for ORA. The corneal resistance factor decreased significantly postoperatively (5.8 ± 1.7 mm Hg) compared with preoperatively (6.75 ± 3.7 mm Hg; P = 0.021) and increased again during follow-up (6.2 ± 1.9 mm Hg; P = 0.024), without regaining preoperative values. Corneal hysteresis and Keratoconus Match Index did not change significantly. Stiffness parameter A1 ( P = 0.045) increased significantly after ICRS implantation and Arth decreased significantly from 181 ± 85 to 150 ± 92 ( P = 0.016). However, there was no significant postoperative change for others Corvis parameters. Corneal biomechanical properties showed inconsistent changes after ICRS implantation. Classical corneal biomechanical parameters (using single central air-puff tonometers) do not seem to be suitable for follow-up after ICRS implantation.