Exhumation Of Core Complexes Research Articles

Oligocene‐Miocene Exhumation of the Pinaleño Metamorphic Core Complex, Southeastern Arizona: Support for Magmatism and Plate Margin Reorganization as Controls on Regional Exhumation Trends

AbstractThe Pinaleño Mountains of southeastern Arizona is the eastern‐most metamorphic core complex in the southern U.S. and northern Mexican Cordillera. This study investigates the thermal history and exhumation record of the Pinaleño core complex using mica 40Ar/39Ar, apatite and zircon (U‐Th)/He, and apatite fission‐track thermochronometers. The Pinaleño Mountains experienced two periods of rapid cooling during the Cenozoic. The first period, from ca. 27 to 21 Ma, records tectonic exhumation related to the development of the core complex and extensional shear zone. This period was followed by a relatively quiescent interval from 21 to 13.5 Ma that records little to no exhumation. The second period of rapid cooling, from 13.5 to 11 Ma, records tectonic exhumation related to high‐angle normal faulting, characteristic of the Basin and Range province. The exhumation timing of the Pinaleño core complex matches previously recognized spatiotemporal trends in the southern Basin and Range province and indicates that core complex exhumation in this region started in southeastern Arizona (ca. 32–33°N) and migrated both northward and southward. These trends correlate well with the latitude and timing of subduction of the Pacific‐Farallon spreading ridge and the migration of the Mendocino (northward) and Rivera (southward) triple junctions. Spatiotemporal core complex exhumation trends also correlate well with regional magmatism associated with the mid‐Cenozoic flare‐up, including syn‐extensional intrusive rocks found in the footwalls of core complexes.

Geology, U-Pb dating and 3D visualisation of late-orogenic Klenov Pluton (Pelhřimov Core Complex, Central European Variscides)

ABSTRACT The geological map of the Klenov Pluton (Moldanubian Batholith), and its 3D visualization, brings the new findings in the context of granite emplacement within late-Variscan settings. The Klenov Pluton has a peraluminous composition resulting from partial melting of metasedimentary sources and subsequent differentiation. The new ages 327.14 ± 0.21 Ma and 327.80 ± 0.37 Ma, reflect the narrow time-span of magma emplacement and cooling. The 327 Ma Klenov Pluton was emplaced syntectonically as a ‘sheet-like’ granite intrusion at depth ca. 10 kilometers during the later stages of the Pelhřimov Core Complex exhumation (at ca. 329 to 327 Ma) associated with ∼N–S oriented compression. Gravity modelling suggests that the Klenov Pluton has an asymmetric shape where its western flank is parallel to the ∼NW moderately dipping Pelhřimov Core Complex. The eastern margin of the Pluton is shallower and has been later modified by ∼SE-side-up normal faulting (Lodhéřov Fault Zone).

A carbon, nitrogen, and multi-isotope study of basalt glasses near 14°N on the Mid-Atlantic Ridge. Part B: Mantle source heterogeneities

Geochemical variations along mid-ocean ridges reveal the heterogeneous nature of the convecting upper mantle and geodynamic evolution of our planet (e.g., Hofmann, 2007; Parai et al., 2012). Although the occurrence of incompatible element and isotopically enriched mid-ocean ridge basalts (E-MORB) commonly arises from interaction with nearby mantle plumes, the source of E-MORBs far from known hotspots is debated. A well-known example of an enigmatic geochemical enrichment is found at 14°N on the Mid-Atlantic ridge (MAR). This is also one of the few locations worldwide where volatile-saturated E-MORBs, often referred to as “popping rocks” (PR), have been recovered. Although the mechanism(s) involved in popping rock generation remain elusive, compressional regimes associated with the exhumation and formation of oceanic core complexes (OCC) may be required to produce popping rocks via protracted volatile accumulation. However, the geochemical signature of OCC samples and their potential relationship to local geochemical enrichments associated with popping rock-affiliated MORBs remain unknown. Here, we present a comprehensive volatile characterization of popping rocks and associated MORBs (n = 19) sampled at 14°N on the MAR, including (n = 2) normal MORBs (N-MORB) from an oceanic core complex (OCC) and (n = 17) E-MORBs (Bekaert et al., Part A). We use isotopic and abundance data for volatile (carbon, nitrogen, noble gases) and radiogenic (Pb, Sr, Nd) elements, as well as the abundances of major and trace elements, to elucidate on the source(s) of E-MORBs at 14°N and discuss the potential origin(s) of geochemical heterogeneities within the upper mantle. We observe co-variations of helium and radiogenic element isotopes, suggesting potential contributions from a young HIMU-type (high μ = time-integrated 238U/204Pb) component in the OCC mantle source. The mantle source of the OCC samples is clearly distinct from that of PR-affiliated samples, suggesting no genetic relationship between OCC samples and E-MORBs. In addition, elevated Dy/Yb in OCC samples likely point to the incorporation of a subducted crustal component that is not observed in the mantle source of other MORB samples analyzed in this study. We report mantle source 40Ar/36Ar variations at 14°N, which, in line with previous studies, are interpreted as primarily reflecting variations in the amounts of recycled atmospheric Ar. Despite extensive evidence for drastic geochemical heterogeneities at 14°N on the MAR, we observe no significant δ15N variation (average δ15N = -4.49 ± 1.40 ‰) across N-MORB and E-MORB samples. This is a fundamental constraint, as the absence of significant N isotope variations across the upper mantle may imply that sedimentary N (with a typical δ15N ∼+6‰) is not extensively introduced within this reservoir during subduction. We investigate several scenarios that could explain this observation, including a significant contribution of altered oceanic crust to the overall budget of subducting slabs, quantitative return of subducting sedimentary N to the Earth's surface by arc volcanism, and/or preferential transport/preservation of sedimentary N in the lower mantle source of oceanic island basalts.

Deformation conditions and kinematic vorticity within the footwall shear zone of the Wildhorse detachment system, Pioneer metamorphic core complex, Idaho

Detailed analysis of numerous sequential fabrics and microstructures preserved in the footwall shear zones of detachment fault systems can be used to clarify the spatial relationships and timing of deformation related to emplacement and exhumation of metamorphic core complexes. To quantify the kinematics during deformation, we conducted microstructural analyses along two ∼300 m transects across mylonitic sections of the footwall of the Eocene Wildhorse Detachment system within the Pioneer metamorphic core complex. These results enable comparison of deformation at different structural levels during exhumation and between monomineralic and polymineralic lithologies.In both transects, mylonitic rocks preserve normal-sense asymmetric structures such as recrystallized quartz oblique foliation, S/C–C′ structures, and asymmetric feldspar porphyroclasts. Quartz microstructures, CPO patterns, and kinematic vorticity analyses consistently indicate simple shear-dominated deformation, which is predicted for late stage, shallow-level deformation within a rolling hinge detachment system exhuming a metamorphic core complex. Variations in c-axis patterns and active slip systems are associated with temperature, influenced by structural level, and grain boundary processes related to lithology. To determine the degree of non-coaxiality and minimize limitations and uncertainties with kinematic vorticity methods, we used two methods to evaluate flow vorticity. Kinematic vorticity ranges from 0.55 to 0.95 for the oblique quartz foliation (δ/β) and C′-type shear bands (C′-c) methods. Quartz recrystallized grain size ranges from 10 to 37 μm, indicating maximum differential stresses of 80–110 MPa, which is consistent with the footwall shear zones of numerous metamorphic core complex detachment systems.

Crustal flow driving twin domes exhumation and low-angle normal faulting in the Menderes Massif of western Anatolia

Lower crustal flow in regions of post-orogenic extension has been inferred to explain the exhumation of metamorphic core complexes and associated low-angle normal (detachment) fault systems. However, the origin of detachment faults, whether initially formed as high-angle or low-angle shear zones, and the extension is symmetric or asymmetric remains enigmatic. Here, we use numerical modeling constrained by geophysical and geological data to show that symmetric extension in the central Menderes Massif of western Anatolia is accommodated by the crustal flow. Our geodynamic model explains how opposite dipping Gediz and Büyük Menderes detachment faults are formed by ∼40° footwall rotation. Model predictions agree with seismic tomography data that suggests updoming of lower crust beneath the exhumed massifs, represented as “twin domes” and a flat Moho. Our work helps to account for the genetic relation between the exhumation of metamorphic core complexes and low-angle normal faulting in both Cordillera and Aegean orogenic regions and has important implications on crustal dynamics in extensional provinces.

Fault growth and orthogonal shortening in transtensional supradetachment basins: Insights from the ‘Old Red’ of western Norway

AbstractFor basins that evolve adjacent to large‐magnitude normal faults, tectonic controls on sedimentation involve isostatic back rotation of an exhuming footwall and, commonly, the evolution of kilometre‐scale extension‐parallel folds. Based on observations from classic localities in western Norway, we propose a three‐stage evolution scenario for transtensional supradetachment basins where the basins become progressively re‐arranged because of core complex exhumation and subsequent orthogonal shortening. Extension‐parallel transverse synclines initially form due to a normal displacement gradient, but when displacements accumulate beyond a certain magnitude, the hanging wall increasingly responds to core complex exhumation and the original depocentre, formed close to the original area of maximum displacement, will become inverted and dismembered above the core complex. Two new synclinal depocentres will develop along the flanks. Because these synclines form by extensional fault growth rather than by shortening, they will be associated with widening of the basin and onlap onto basement at high angles to the maximum elongation trend with overall grain‐size decrease and retrogradational stacking patterns. Further, because these synclines grow away from the evolving core complex, sedimentary units will become asymmetrically distributed inside each syncline in such a way that the oldest deposits in the syncline will be preserved on the flank most proximal to the core complex. In transtensional environments, a third evolutionary stage may involve constrictional strain where extension‐parallel folds and reverse faults produced by orthogonal shortening enhance or interact with other structures. Ultimately, initial extensional sub‐basins may become warped across extension‐parallel folds. Hanging wall deformation will be manifested in shifting accommodation patterns, with depocentres that generally migrate in the direction of the detachment fault. Accommodation patterns initially related to megafault growth may conceptually evolve into depocentres controlled by orthogonal shortening.

Genesis of the gneissic core complexes in the Arabian-Nubian Shield and its tectonic implications: A regional overview

Metamorphic core complexes (MCCs) are a domed structures cored by high grade gneiss overlain by low grade supracrustal rocks. They are characterized by some common features such as extensional fabrics, ultra high-grade metamorphic facies, low angle normal fault (detachment fault), strike-slip shear zones surrounded the core complexes and ductile mylontitic shear zone (thrust zone) that separate the overlying low-grade rocks from the lower high-grade rocks. There is a debate about the presence or absence of metamorphic core complexes in the Arabian-Nubian Shield (ANS) especially in its northern part. The gneissic complexes in the ANS are considered as strike-slip core complexes like the Qazaz and Krish Domes whereas, those in the Egyptian Nubian Shield (ENS) are interpreted as antiformal stacks (e.g. Meatiq and Hafafit) formed during thrusting, or core complexes formed during orogen-parallel crustal extension. Some metamorphic core complexes are domes or contain gneiss domes within them, but not all gneiss domes possess the essential elements of a true metamorphic core complex. The most important points that negate the existence of MCCs in the ANS are absence of ultra-high grade metamorphic facies, absence of real low-angle normal faults, not all the gneisses have a domal structures, adjacent syn-extensional basins have fill that is older than the gneissic complexes, and models of ANS core complex exhumation include strike-slip faults with slip senses recently found to be inconsistent with the models. The gneissic complexes in the ANS differ from the Cordilleran-type or Aegean-type metamorphic core complexes. The origin of gneiss domes in the ANS is controversial, and many of them are presumably produced by mechanisms other than horizontal extension. During the oblique convergence of East and West Gondwana, the gneissic complexes in the ENS evolved from pure shear to simple shear-dominated transpression due to oblique convergence between East and West Gondwana along the Mozambique belt.

Supradetachment basins in necking domains of rifted margins: Insights from the Norwegian Sea

AbstractSupradetachment basins at passive rifted margins are a key witness of major‐continental extension, and they may preserve a record from which the amount and rates of extension and metamorphic core complex exhumation may be reconstructed. These basins have mainly been recognised in back‐arc and orogenic collapse settings, with few examples from rifted margins. Using 2D and 3D seismic reflection, wellbore, and gravity anomaly data, we here characterise the three‐dimensional structural and tectonosedimentary evolution of a spoon‐shaped supradetachment basin that was formed in the necking domain of a rifted margin, at the southern limit of the Møre and Vøring segments of the Norwegian rifted margin. The basin, with an areal extent of ca. 2400 km2, and a landward‐rotated syn‐tectonic succession up to ca. 30 km thick (true stratigraphic thickness), is separated from footwall continental margin core complex basement culminations by major large‐offset (>30 km) normal fault complexes characterised by a cross‐sectional geometry whereby an upper, steeper part of the fault gives way to a low‐angle detachment fault at depth. These fault complexes are associated with a tectonic thinning of the continental crust to ca. 11 km, compared with a crustal thickness of ca. 27 km in the proximal domain. The basin is filled by a succession of pre‐, syn‐ and post‐tectonic deposits, that accumulated over time as the basin evolved over a series of rift‐ and detachment faulting events. The 30 km thick syn‐tectonic succession reflects deposition during two separate rifting events, which are disconnected by deposits reflecting a relative short period of tectonic quiescence. The results are discussed in light of examples of supradetachment basins on other rifted margins globally, as well as in the context of the evolution of the Norwegian margin overall.

Protolith affiliation and tectonometamorphic evolution of the Gurla Mandhata core complex, NW Nepal Himalaya

Abstract Assigning correct protolith to high metamorphic-grade core zone rocks of large hot orogens is a particularly important challenge to overcome when attempting to constrain the early stages of orogenic evolution and paleogeography of lithotectonic units from these orogens. The Gurla Mandhata core complex in NW Nepal exposes the Himalayan metamorphic core (HMC), a sequence of high metamorphic-grade gneiss, migmatite, and granite, in the hinterland of the Himalayan orogen. Sm-Nd isotopic analyses indicate that the HMC comprises Greater Himalayan sequence (GHS) and Lesser Himalayan sequence (LHS) rocks. Conventional interpretation of such provenance data would require the Main Central thrust (MCT) to be also outcropping within the core complex. However, new in situ U-Th/Pb monazite petrochronology coupled with petrographic, structural, and microstructural observations reveal that the core complex is composed solely of rocks in the hanging wall of the MCT. Rocks from the core complex record Eocene and late Oligocene to early Miocene monazite (re-)crystallization periods (monazite age peaks of 40 Ma, 25–19 Ma, and 19–16 Ma) overprinting pre-Himalayan Ordovician Bhimphedian metamorphism and magmatism (ca. 470 Ma). The combination of Sm-Nd isotopic analysis and U-Th/Pb monazite petrochronology demonstrates that both GHS and LHS protolith rocks were captured in the hanging wall of the MCT and experienced Cenozoic Himalayan metamorphism during south-directed extrusion. Monazite ages do not record metamorphism coeval with late Miocene extensional core complex exhumation, suggesting that peak metamorphism and generation of anatectic melt in the core complex had ceased prior to the onset of orogen-parallel hinterland extension at ca. 15–13 Ma. The geometry of the Gurla Mandhata core complex requires significant hinterland crustal thickening prior to 16 Ma, which is attributed to ductile HMC thickening and footwall accretion of LHS protolith associated with a Main Himalayan thrust ramp below the core complex. We demonstrate that isotopic signatures such as Sm-Nd should be used to characterize rock units and structures across the Himalaya only in conjunction with supporting petrochronological and structural data.

Segmentation of the Caledonian orogenic infrastructure and exhumation of the Western Gneiss Region during transtensional collapse

The (ultra)high-pressure Western Gneiss Region of the Norwegian Caledonides represents an archetypical orogenic infrastructure of a continent–continent collision zone. To test established exhumation models, we synthesize the geochronology and structures of major basement windows and provide new ages from poorly dated areas. Migmatite U–Pb zircon samples date melt crystallization at c. 405 Ma in the Øygarden Complex, expanding the spatial extent of Devonian migmatization. Micas from shear zones in the Øygarden and Gulen domes yield 40 Ar/ 39 Ar ages mostly between 405 and 398 Ma, recording the exhumation of metamorphic core complexes. On a larger scale, the youngest ages of various geochronometers in different segments of the Western Gneiss Region show abrupt breaks (10–30 myr) across low-angle detachments and sinistral transfer zones, which also correspond to metamorphic and structural discontinuities. We explain the segmentation of the orogenic infrastructure by partitioned post-orogenic transtension due to lateral and vertical rheological contrasts in the orogenic edifice (strong cratonic foreland and orogenic wedge v. soft infrastructure). Differential crustal stretching dragged out deep levels of the orogenic crust below low-angle detachments and became progressively dominated by sinistral transfer zones. Collapse obliterated the syn-collisional structure of the orogenic root and resulted in the diachronous exhumation of distinct infrastructure segments. Supplementary material: Complete analytical results are available at https://doi.org/10.6084/m9.figshare.c.5241710

Exhumation of Metamorphic Core Complexes through Progressive Subhorizontal Shearing, Doming, and Detachment Faulting: Insights from the Cretaceous Liaonan Metamorphic Core Complex, Eastern North China Craton

Abstract The Early Cretaceous Liaonan metamorphic core complex (MCC), eastern North China craton, provides a field setting to evaluate progressive middle-upper crustal subhorizontal shearing, doming, and detachment faulting. The MCC is bounded by a western Jinzhou detachment fault zone (JDFZ) and a southern Dongjiagou shear zone (DSZ) that were primarily suggested to be two segments of the master detachment fault zone. Integrated structural, microstructural, quartz c-axis fabrics, and fluid inclusion analysis and zircon U-Pb dating on mylonites and syn-kinematic granites along the DSZ and JDFZ reveal that the DSZ possesses deformation characteristics that are obviously different from those along the JDFZ. The DSZ is composed of a Lower Unit of sheared Archean gneisses and an Upper Unit of sheared Neoproterozoic metasedimentary rocks, between which there is an obvious tectonic discontinuity contact (TDC). Rocks from below and above the TDC possess structures and fabrics with consistent geometries and kinematics with those along the JDFZ. A metamorphic break exists between the two units that were sheared at contrasting deformation conditions. Dating of zircons from syn-kinematic granitic dikes from DSZ yields an age of ca. 134 Ma, which is similar to the ages of early shearing along the JDFZ. It is concluded that the Jinzhou and Dongjiagou faults formed parts of a detachment faulting with top-to-the WNW kinematics. Exhumation of the Liaonan MCC shearing initiation along both the JDFZ and DSZ at an early stage (ca. 133~134 Ma), subsequent progressive shearing, and doming during slow cooling and exhumation before ca. 120 Ma, followed by fast cooling and rapid exhumation of the MCC by detachment faulting along the JDFZ until ca. 107 Ma.

Shear zone evolution during core complex exhumation – Implications for continental detachments

The formation of low-angle detachments involves exhumation of previously ductile material and fault zone weakening. To better understand this relationship, we studied a deeply eroded metamorphic core complex, which formed in the core of the Bergen Arcs (W Norway) during Caledonian post-orogenic collapse. Multi-scale structural mapping in the Øygarden Complex constrains three structural levels characterized by localized shear (Upper Unit), distributed deformation (Middle Unit) and a migmatite double-dome (Lower Unit). All levels show retrogressive E-W stretching accompanied by extension-parallel recumbent folding, albeit, with opposing shear senses at upper and middle/lower levels. The systematic comparison of 23 shear zones constrains the ductile-to-brittle structural evolution. Initially, high temperatures and partial melting controlled pervasive deep crustal flow and ductile doming. During retrogressive shearing, lithological heterogeneity controlled strain localization and channelized fluid flow causing retrograde phyllosilicate growth. This established a feedback loop of fluid-flow, fabric weakening and progressive shear localization. The interconnection of inherited and newly formed weak, phyllosilicate-rich layers promoted the formation of bivergent detachments that rapidly exhumed a dome of previously ductile crust. Retrogressive weakening in a kilometer-wide ductile-to-brittle ‘processing zone’ may be essential for the formation of continental detachments.

Tectonic domains and exhumation history of the Omineca Belt in southeastern British Columbia from 40Ar/39Ar thermochronology

A large geochronological data set comprising 40Ar/39Ar and K–Ar (hornblende, muscovite, biotite, and K-feldspar), Rb–Sr (muscovite), fission track (zircon and apatite) and U–Pb (zircon and monazite) dates has been compiled for the southern Kootenay Arc and western Purcell anticlinorium in the Omineca Belt of the Canadian Cordillera in southeastern British Columbia. New 40Ar/39Ar data for hornblende, muscovite, biotite, and alkali feldspar are presented and combined with data from other studies. We integrate these data with recent advances in the geology of the region to define three partially fault-bounded domains with differing geological and exhumation histories, here termed the western, central, and eastern domains. The western domain is characterized by (1) late synkinematic Jurassic plutons with hornblende, muscovite, and biotite 40Ar/39Ar plateau dates between 170 and 165 Ma, some of which are within error of the U–Pb zircon dates for these plutons, and (2) late Early Cretaceous (118–102 Ma) plutons commonly with concordant mica 40Ar/39Ar plateau dates of a similar age range, indicating rapid cooling following emplacement of both suites. The central domain is bounded by regional-scale normal faults (Gallagher and Midge Creek faults, Blazed Creek/Next Creek faults, and Purcell Trench fault) and contains superposed Early and Late Cretaceous zones of Barrovian metamorphic rocks and several mid- to Late Cretaceous, post-kinematic plutons. The transition from the western domain into the central domain is characterized by 40Ar/39Ar mica age spectra showing a progression of increasing thermal overprinting. Along the north–south length of the central domain, biotite and muscovite yield Paleocene to Eocene K–Ar and 40Ar/39Ar plateau dates between 66 and 40 Ma. The eastern domain consists of (1) a southern portion that occurs in the hanging wall of the Purcell Trench fault, comprising mid-Cretaceous intrusions of the Bayonne magmatic suite emplaced into biotite zone metasedimentary rocks of the Mesoproterozoic Belt-Purcell Supergroup in the western Purcell anticlinorium, and (2) a northern portion that shows a continuous transition with the northern part of the central domain north of the terminus of the Purcell Trench fault. Cretaceous igneous rocks in the southern portion of the eastern and western domains have 40Ar/39Ar mica plateau dates that are <9 Myr younger than U–Pb zircon dates, indicating rapid cooling shortly after emplacement. 40Ar/39Ar step-heating reveals that there was a mid- to Late Cretaceous thermal disturbance in the eastern domain, possibly related to emplacement of younger plutons at deeper crustal levels and the Late Cretaceous Barrovian metamorphic event recorded in rocks of the central domain, such that biotite with dates <ca. 73 Ma yield plateau age spectra but those with older dates are disturbed. The new geochronology, combined with recent mapping and metamorphic studies, leads to the conclusion that the exhumation of the Barrovian metamorphic rocks of the central domain was a multi-stage process. The central domain experienced rapid tectonic decompression and minor pluton emplacement in the Late Cretaceous to early Paleocene (76–61 Ma) when the Cordilleran orogen was under regional contraction during which most of the exhumation occurred. Final exhumation in the footwall of Eocene normal faults was less significant and occurred between 53 and ca. 46 Ma when the Cordilleran orogen had transitioned to regional extension, by which time the three domains had attained a similar crustal level. These episodes of exhumation are similar to those found in other core complexes in the southern Canadian Cordillera and contiguous northern Idaho and Washington. The earlier episode is coincident with regional-scale, Late Cretaceous thrust faulting in the Foreland Belt of the Rocky Mountains. Eocene normal faulting and final exhumation of core complexes in the Omineca Belt mark the end of contraction in the Foreland Belt.

Extent and Cessation of the Mid‐Cretaceous Hikurangi Plateau Underthrusting: Impact on Global Plate Tectonics and the Submarine Chatham Rise

AbstractSubduction of oceanic plateaux are events that have occurred infrequently in Earth's history. Although rare, these events are thought to considerably influence regional tectonics and global plate motions. In the mid‐Cretaceous the oceanic Hikurangi Plateau collided with the formerly active East Gondwana margin: An event which falls into the same of a sudden change from subduction to extensional processes, including graben formation, development rift basin development, and exhumation of metamorphic core complexes in the Zealandia continent as well as a global‐scale plate reorganization event. In this study, we use recently acquired seismic refraction and gravity data along one profile across the submarine Chatham Rise, which represent a former accretionary wedge of the East Gondwana subduction zone. We demonstrate that the southward extent of the subducted Hikurangi Plateau in the lower crust beneath the submarine Chatham Rise along our profile is only ~150. This is ~150 km less than the previously suggested extent. Furthermore, we interpret that a slice of the subducted Phoenix Plate remains attached to the southern edge of the Hikurangi Plateau. We suggest that cessation of subduction in response to the Hikurangi Plateau jamming as well as the rollback and detachment of the Phoenix Plate slab played an important role in the changing tectonic forces across Zealandia in mid‐Cretaceous. Moreover, we suggest that the subduction cessation along the Hikurangi Plateau segment led to the fragmentation of the Gondwana subduction zone and Phoenix Plate, which significantly influenced and potentially prolonged the global mid‐Cretaceous plate reorganization event.

The Paleogene ophiolite conundrum of the Iran–Iraq border region

New and compiled geochemical, isotopic and geochronological data allow us to propose a new explanation for Paleogene oceanic magmatic rocks along the Iran–Iraq border. These rocks are represented by a thick pile (>1000 m) of pillow lavas and pelagic sediments and underlying plutonic rocks. These are sometimes argued to represent a Paleogene ophiolite but there are no associated mantle rocks. Integrated zircon U–Pb ages, bulk rock major and trace element and radiogenic isotope data indicate that these rocks are more likely related to forearc rifting due to extreme extension during Late Paleogene time which also triggered high-flux magmatism in the Urumieh–Dokhtar Magmatic Belt and exhumation of core complexes in Iran. These observations are most consistent with formation of the Paleogene oceanic igneous rocks in a >220 km long forearc rift zone. Supplementary material: Detailed analytical procedure and tables S1 to S6 are available at: https://doi.org/10.6084/m9.figshare.c.4972994

Application of remote-sensing techniques in geological and structural mapping of Atalla Shear Zone and Environs, Central Eastern Desert, Egypt

The Atalla Shear Zone (ASZ) is one of the crucial megashears which are geometrically and kinematically akin to the Najd-Shear Corridor in the central Eastern Desert of Egypt. The Landsat-8 and ASTER-based mapping techniques integrated with extensive petrographic and structural-field investigations enhanced the geological and structural maps of the study area. The Neoproterozoic basement complex in the study area discriminated into ditinctive rock suites: Meatiq Group, ophiolitic melange, arc assemblage, syn- to late-tectonic granitoids, Dokhan Volcanics, Hammamat Sediments, post-Hammamat Felsites and post-tectonic granitoids. The true color composites (TCC) (4 3 2 for Landsat-8; 3 2 1 for ASTER), false color composites (FCC) (1 6 4, 1 6 7 and 7 5 1 for Landsat-8; 5 4 3 and 9 6 4 for ASTER), principal component analysis (PCA) (1 2 3, 3 2 1 and 6 4 2 for Landsat-8; 1 2 3 and 5 4 2 for ASTER), minimum noise fraction (MNF) (1 2 3 and 3 5 1 for Landsat-8; 1 2 4 and 3 2 1 for ASTER) and band ratios (BR) (6/2, 6/7, 6/5*4/3 and 7/6, 7/5, 5/3 for Landsat-8; 2/6, 7/5, 7/6 and 4/7, 3/4, 2/1 for ASTER besides the new created ratio 2/6, 7/5, 7/6) are the best combinations that demonstrate efficiency in discrimination of lithologic contacts and structural elements, using the spectral signature of different rock units. Moreover, the BR b7/b5, b5/b7 and b6/b4 of grey scale for Landsat-8 are used as a tool for mineral detection along with the spectral indices created to detect muscovite (b7/b6), ferrous silicates b5/b4 (biotite, chlorite and amphiboles) and ferrous iron b5/b3 (mafic minerals). The automatic lineament extraction utilizing the SRTM data advocated the role of NE- to NNE-trending lineaments in the tectonic framework of the study area. The structural fabric of the study area is evaluated in three main structural domains: Meatiq (MD), Atalla Shear Zone (ASZD) and Wadi Hammamat (WHD). The pronounced structural implication is the transposition of NE-oriented fabric in MD into NW-oriented penetrative shear-related fabric, fully in the ASZD and partly in WHD. The combination of transcurrent shearing with ENE-directed shortening along the ASZ that was resulted in noteworthy transpressive structures resemble in many respects those observed in the Ajjaj Shear Belt in Western Arabia. Among these structures are shear zone-related folds, imbricated thrust sheets, antiformal stacks and thrust duplexes. The deformation history of the investigated area proposed four phases of deformation (D1–D4). It depicts a long lasted deformational event covering the main accretion-collision phases concurrent with the E-W assembly of Gondwana, and the subsequent post-collision Najd-related transpressional phase which resulted in several major left-lateral transcurrent shear zones along with the exhumation of gneissic core complexes in the Arabian-Nubian Shield.

Miocene geochronology and stratigraphy of western Anatolia: Insights from new Ar/Ar dataset

Understanding the dynamic evolution of orogenic belts and intra-continental basins depend on field-based (tectono-) stratigraphic observations paired with geochronologic data such as 40Ar/39Ar analyses. Independent dating of tectono-stratigraphic units is a crucial tool to place them in a broader framework. In this study, we focus on the geodynamic development of western Anatolia, with an emphasis on the timing and progression of volcanism along the İzmir-Balıkesir Transfer Zone (İBTZ). We present 36 new 40Ar/39Ar ages of both volcanic complexes/domes and volcanic rocks coevally emplaced within Miocene sediments from western Anatolian extensional basins. In combination with existing ages from the literature and paleontological records from Miocene basin in-fills, we build an improved and integrated stratigraphic framework for the region. Our results show a remarkable break in volcanism from this area during the Langhian (15.97–13.82 Ma), encompassing a major unconformity in the İBTZ, and a pulse in the exhumation of metamorphic core complexes in western Anatolia. Hence we attribute this magmatic pause to the tectonic reorganization and change in the partitioning of extensional deformation between Cycladic and Menderes core complexes, facilitated by the acceleration of roll-back of African oceanic lithosphere below western Anatolia.

The Gediz Supradetachment System (SW Turkey): Magmatism, Tectonics, and Sedimentation During Crustal Extension

AbstractUnraveling the evolution of supradetachment basins developed in the hanging wall of low‐angle detachment faults may be an invaluable tool in reconstructing the tectonic evolution of highly extended terrains. These basins may record major regional tectonic events related to the exhumation of metamorphic core complexes, and the reconstruction of their evolution helps to quantify the amount of extension accommodated by such processes. Here we present stratigraphic and structural field evidence and micropaleontological constraints to the Neogene‐to‐Quaternary evolution of the supradetachment Gediz Graben that developed on top of the exhuming Central Menderes Massif (SW Turkey). This basin displays three different structural styles during its evolution: (i) it initiated as a ramp basin following the activation of the Gediz Detachment in the Middle Miocene, (ii) evolved as a half graben during the late Miocene following the activation of high‐angle brittle faults at its southern margin, and (iii) reached its final symmetric graben configuration in Late Pliocene (?)‐Quaternary times following the activation of its northern margin. New micropaleontological data document a short‐lived upper Tortonian marine episode in the basin, and major along‐strike variations in exhumation are documented on its southern margin. Our reconstruction shows how sedimentary basins originally formed in the hanging wall of detachment faults may eventually end up in tectonic contact with the mylonitic footwall. Finally, we highlight the importance of magmatism in localizing the deformation in highly extended terrains and in controlling the evolution of supradetachment systems.

Core Complex Segmentation in North Aegean, A Dynamic View

AbstractThe core complexes of the North Aegean result from the gravity spreading of a thrust wedge, driven by the Hellenic slab rollback, since middle Eocene. The development of the Southern Rhodope Core Complex occurred in two stages: (i) core complex exhumation accommodated by the Kerdylion detachment and (ii) steep normal faulting controlling the deposition of Neogene sedimentary basins that segmented the core complex. Both stages have been controlled by a clockwise rotation of the detachment hanging wall. The bulk amount of extension along the Aegean coastline in Northern Greece reached 120 km. The transition between the two stages occurred in middle Miocene due to an increase in extensional displacement by a factor 5. This transition between two different modes of extension, from localized detachment (i.e., core complex mode) to distributed steep normal faulting (i.e., wide rift mode), occurred at Aegean scale as a result of an acceleration of slab rollback. The Neogene basins emplaced close to the detachment, where brittle upper crust was thin (around 7 km) but containing weak marble layers allowing the formation of ramp‐flat extensional systems with rollover‐type basin fill. Since Pliocene, the stretching direction changed, from NE‐SW to NS, due to the propagation of the North Anatolian Fault in the North Aegean domain.

Synconvergent exhumation of metamorphic core complexes in the northern North American Cordillera: COMMENT

Synconvergent exhumation of metamorphic core complexes in the northern North American Cordillera: COMMENT