Copper Oxide Nanowires Research Articles

Real-Time Wireless Detection of Heavy Metal Ions Using a Self-Powered Triboelectric Nanosensor Integrated with an Autonomous Thermoelectric Generator-Powered Robotic System.

The integration of the Internet of Things (IoT) with advanced sensing technologies is transforming environmental monitoring and public health protection. In this study, a fully self-powered and automated chemical sensing system is developed and integrated with a robotic hand for "touch and sense" detection of toxic heavy metal ions (Pb2⁺, Cr⁶⁺, As3⁺) in aquatic environments. The system combines a self-powered solid-liquid triboelectric nanosensor (SL-TENS) with a thermoelectric generator (TEG), which harnesses ambient heat to power the robotic hand, eliminating the need for external power sources. The robotic hand is controlled wirelessly via an exo-hand, minimizing the risk of exposure during remote monitoring. The sensing component uses copper oxide nanowires (CuO NWs) coated with ion-selective membranes (ISMs) to enhance triboelectric output and enable highly selective ion detection. The system demonstrates effective real-time, on-site detection in lake water and data transmitted wirelessly to the user. This innovative approach provides a highly safe and efficient method for detecting hazardous pollutants in difficult-to-access areas, offering significant potential for wireless and real-time environmental monitoring and hazard prevention, thus contributing to the safeguarding of human health. This study presents a novel advancement in the field of IoT-enabled environmental monitoring systems.

Sequential DBD plasma-assisted tandem tri-electrodes Fenton process for enhanced antibiotics treatment and denitrification

Ozone generated by dielectric barrier discharge (DBD) plasma has the potential for water treatment; however, its limitations, including water solubility, performance in complex matrices, and resistance to some pollutants. This study explored a sequential DBD plasma assisted by a tandem tri-electrode Fenton (S-PEF) process, using a three-stage treatment approach for degrading antibiotics (sulfamethoxazole, SMX; amoxicillin, AMX; and norfloxacin, NOF) in continuous flow mode for 220-bed volumes. Initially, antibiotics such as SMX and AMX underwent degradation in DBD plasma gas, which housed the mixing chamber. The more resilient NOF was removed by hydroxyl radicals (OH) in the following anodic chamber of the tandem trielectrodes by Fenton assisted oxidation. The continuous cyclic redox regeneration of Fe in tandem trielectrodes prevents secondary Fe sludge pollution. Finally, NO3-N and NO2-N were denitrified into N2 with 95 % selectivity in a cathodic chamber using copper oxide nanowires. This sequential treatment is crucial to mitigating the competitive effects of CO32− and humic acid in wastewater since O3 is less susceptible to them compared to OH. The S-PEF completely degraded all antibiotics regardless of water temperature (10 and 25 °C) compared to sole plasma treatment. Finally, toxicity assessments using an ecological structure–activity relationship (ECOSAR) and E. coli disinfection assays showed a significant reduction in toxicity. This study highlights the promising potential of the S-PEF as an advanced technology for wastewater treatment.

High Surface Area Metal Oxide Enhanced Self-Powered Microfluidic Device for Real-Time Pathological Detection

Biomarkers based sensing in the realm of disease prevention, its diagnosis, and drug development has shown its unique importance in health care. In particular, the platelet level in blood is strongly linked with the development of several kind of severe diseases like coronavirus disease 2019, diabetes, and microbial infections as well as individuals undergoing cancer diagnosis. Currently, commercial methods employed for platelet level determination in whole-blood are based on Coulter principle, flow cytometry, and image analysis. However, these technologies are intricate, time consuming, expensive, and require a trained operator as well as lack of portability. Considering these issues, we have developed a self-powered portable device for real-time platelet level monitoring, aimed towards point-of-care applications. The fabricated self-powered-microfluidic triboelectric nanogenerator (SPM-TENG) utilized test sample flow-resistance for sensing of platelet level and triboelectric voltage output as sensing signal. For the fine tuning of fabricated SPM-TENG, we compared the triboelectric voltage output from gold electrode measurement setup and terminal electrode measurement setup. In view of further improvement in stability, voltage output and to minimize the noise in sensing signals, the geometrical optimization of microfluidic channel was performed. In conclusion we have optimized the device as a terminal electrode measurement setup with copper tubes on terminals of microfluidic channel and copper oxide nanowires grown on the interior of copper tubes. These copper oxide nanowires provide a high surface area for solid-liquid contact separation and is responsible for enhanced sensing signal. The fabricated SPM-TENG has shown its great potential in platelet level sensing with plasma-based samples as well as whole-blood samples. The proposed device demonstrated its practicality towards real-time rapid sensing of platelet level and portability.

Exploring Anion Exchange Phase Transformations in 1D Solid Systems

Phase transformations through ion exchange reactions represent a relatively new strategy, offering a promising route for synthesizing complex and metastable morphologies and phases in nanoscaled solid ionic materials, which are challenging or even impossible to achieve through standard bottom-up approaches. Moreover, they provide a unique opportunity to investigate the mechanisms and new, yet unexplored phenomena accompanying the chemical modifications in the solid state. These mechanisms remain largely unknown and unexplored, thereby limiting the full potential of ion exchange reactions as one of the primary synthesis or modification strategies for complex ionic nanomaterials. In this study, copper oxide (CuO) nanowires were prepared via thermal oxidation method and used as a template material to explore oxide-sulfide anion exchange transformation mechanism. Following the synthesis, CuO nanowires underwent treatment with sulfur-containing gases in both thermal and non-thermal environments under various conditions to achieve a controllable exchange of oxygen anions with sulfur. The mechanisms underlying these transformations were unraveled with the use of electron microscopy. The copper oxide–sulfide system is particularly intriguing due to the promising properties of copper oxide and sulfide in gas sensing, solar cells, energy storage systems, and photocatalysis. The full or partial transformation between the two phases can therefore represent a route to manipulate and enhance the properties desired for each application.

Dual Heterojunction Graphene-Supported Photocatalysts of Copper Oxide Nanowires and Copper Ferrite Nanoparticles for Photoelectrochemical Water Splitting

Dual Heterojunction Graphene-Supported Photocatalysts of Copper Oxide Nanowires and Copper Ferrite Nanoparticles for Photoelectrochemical Water Splitting

Efficient hydrogen production via overall water splitting using CuO/ZnO decorated reduced graphene oxide as bifunctional electrocatalyst

Conjunction of ‘n’ and ‘p’-type materials have gained considerable attention for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) as potential substitutions to noble metal based nanomaterials. Current work has been designed to synthesize mixed-phase nanocomposite (NC) based on copper (CuO) and zinc oxide (ZnO) nanowires (NWs) and reduced graphene oxide (rGO). A facile chemical reduction method was used for the preparation of NWs, rGO were prepared using modified Hummer's method and lastly CuO/ZnO NWs were grafted on rGO to fabricate NC (CuO/ZnO@rGO) by wet-chemical approach. Characterization techniques were employed to confirm the formation as well as different morphological features of NC. Noticeable D and G bands in Raman spectrum confirmed the formation of NC and EDAX confirmed the presence of C, O, Zn and Cu. XRD analysis has confirmed hexagonal wurtzite structure of NC with a crystallite size of 10.1392 nm. Synthesized material was then investigated for OER and HER in an alkaline medium. As electrocatalyst, NC exhibited overpotential (OP) of 1.678 V to accomplish 10 mA/cm−2 current density (J) in OER and −358 mV (10 mA/cm−2) for HER respectively. Tafel curves of CuO/ZnO@rGO in OER (42 mV dec−1) and HER (270 mV dec−1) were found similar enough to others studies. Proliferated electrochemical activities are responsible for such a lower OP and Tafel slope values that may be due to electronic couplings of copper and zinc, or the homogenous distribution of both the metal oxides which gives polydispersity in their structure as confirmed by SEM images. Promising results of the current study indicated high-performance of synthesized electrocatalyst. Further studies can be designed to evaluate the efficiency of different combinations of noble/non-noble metals or metal oxides with rGO as potential candidate for electrochemical reactions.

CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

Blood platelet count significantly affects the development of severe conditions like myocardial infarction, peripheral arterial ischemia, respiratory compromise, stroke, diabetes, coronavirus disease 2019 (COVID-19), along with chemotherapy patients and those suffering cardiovascular diseases (CVDs). These conditions necessitate frequent monitoring of platelet counts to guide diagnostic and therapeutic decisions. However, existing techniques are relatively time-consuming, lack of accuracy and require precise operation. The emergence of these severe diseases underscored the need to develop advanced platelet count-monitoring techniques which are rapid, highly precise, and conveniently portable for point-of-care applications. In this study, we emphasized the development of a triboelectric microfluidic nanosensor (TMNS) for platelet quantification through the assessment of flow resistance. The functionality of TMNS device is based on immobilization of platelets on a collagen layer coated inside a microfluidic channel. The triboelectric voltage output is measured as a detection signal of the flow resistance and is enhanced by incorporating high surface area copper oxide nanowires (CuO NWs) on the interior of copper tubes. These copper tubes serve as terminal electrodes and for flow guiding. The flow resistance of plasma solutions is elevated when the platelet concentration increases due to heightened adherence of platelets onto the collagen layer. Variations in flow resistance induce alterations in contact electrification, causing changes in output voltage at load terminals. Fine-tuning of the TMNS device was achieved by optimizing the channel width and length, flowing liquid viscosity, and voltage measurement technique. Platelet quantification sensing data were acquired through the combination of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) solutions. The described device exhibits promising capabilities for platelet-count monitoring in whole-blood samples collected from three distinct patient groups, showcasing its potential impact in precise point-of-care applications.

CuO-ZnO nanocomposite for photocatalytic application

The rising levels of water pollution and climate change contribute to water shortages. These factors influence the loss of the environment’s biodiversity and threaten human health. Toxic dye pigments from industries are a significant source of pollution. In this article, we present the synthesis method, characteristics, and photocatalytic properties of the CuO-ZnO nanocomposite, which may affect the degree of decomposition of dyes found in water. The nanocomposite consisting of copper oxide nanowires with zinc oxide nanostructures (CuO-ZnO nanocomposite) was prepared by physical vapor deposition and thermal oxidation methods. The crystalline structure, surface topographies and morphologies, elemental composition, and optical properties of the obtained samples were studied with various techniques such as x-ray diffraction analysis, high-resolution transmission electron microscopy, field emission scanning electron microscopy, energy dispersive x-ray analysis, and UV-vis spectroscopy. The photocatalytic activity of the nanocomposite was measured by testing the degradation of methylene blue under visible irradiation. An increase in the photocatalytic activity of the nanocomposite was observed compared to pure CuO and ZnO. The CuO-ZnO nanocomposite demonstrated a high dye degradation of about 94% during 120 min.

Hydrovoltaic electricity generator using a hierarchical NiFe LDH-coated CuO nanowire mesh device

Innovative advancements in sustainable water-energy nexus solutions are paramount in the current global context. This study introduces a hydrovoltaic electricity generator with advanced capillary wicking under ambient conditions. A hierarchical nanostructure of nickel–iron layered double hydroxides (NiFe LDHs) was deposited on copper oxide nanowires (CuO NWs) on Cu meshes to enhance the diffusion of ion-rich water. The LDH coating improves the overall power, voltage, and robustness of the device. A 200 µL droplet of hygroscopic solutions on a device produces electricity at 0.2 V scale, one of which could be sustained for over 140 h. We explored the working mechanisms, parametric studies, and potential scalability through serial allocation for further applications. This study allows water-driven electricity generation using hierarchical nanostructured materials, effectively harnessing renewable energy from readily available hygroscopic salts or abundant seawater resources.

Improved field electron emission behavior of ultrathin lanthanum hexaboride-coated copper oxide nanowires

A simple approach dealing with thermal oxidation at atmospheric pressure was used to synthesize copper oxide nanowires (CuO-NWs) on copper substrate. The vertically oriented CuO-NWs were used for further subjected to deposition of ultrathin layer (∼20[Formula: see text]nm) of lanthanum hexaboride (LaB[Formula: see text] using the electron beam evaporation technique. The observation of the characteristic vibrational mode of LaB6 in the Raman spectrum of LaB6-coated CuO-NWs (LaB6@CuO-NWs) revealed the existence of LaB6 in the deposited sample. Furthermore, confirmation of LaB6 coating on CuO-NWs was corroborated by X-ray photoelectron spectroscopy (XPS) analysis. The field electron emission (FEE) characteristics of pristine CuO-NWs and LaB6@CuO-NWs were investigated in a planer diode geometry at a base pressure of [Formula: see text][Formula: see text]mbar. The values of turn-on and threshold fields (defined at emission current density of 1 and 10[Formula: see text][Formula: see text]A/cm2, respectively) were found to be 5.4[Formula: see text]V/[Formula: see text]m and 1.6[Formula: see text]V/[Formula: see text]m (for pristine CuO-NWs emitter) and 6.75, and 2.85[Formula: see text]V/[Formula: see text]m (for LaB6@CuO-NWs emitter). Interestingly, a noticeably large emission current density of [Formula: see text][Formula: see text][Formula: see text]A/cm2 has been extracted from the LaB6@CuO-NWs emitter at a relatively lower applied field of 5.8[Formula: see text]V/[Formula: see text]m. The Fowler–Nordheim (FN) plots of both the emitters showed nonlinear behavior, indicative of their semiconductive nature. Furthermore, both the emitters showed relatively stable emission behavior tested at a pre-set value of 1[Formula: see text][Formula: see text]A more than 3[Formula: see text]h. The enhanced FEE behavior of LaB6@CuO-NWs emitter is attributed to the modulation of electronic properties due to LaB6-CuO interface-induced effects. Although the promising FEE behavior of LaB6@CuO-NWs emitter warrants its potential for practical applications, further improvement can be achieved via fabricating an array emitter due to CuO NWS and optimizing the thickness of LaB6 coating.

Exploring the Mechanisms Driving Thermal Growth of Copper Oxide Nanowires

Copper oxide nanowires have gained attention in the scientific community due to their potential in a wide range of applications, including gas sensing, solar cells, energy storage, photocatalysis, and as antibacterial agents. Despite significant research on their thermal growth, the underlying mechanism remains unresolved, and the exact experimental conditions required for their growth are still unknown. To address these knowledge gaps, we conducted thermal oxidation of copper under various conditions and analyzed the resulting nanowires using electron microscopy techniques. Our study aimed to understand the processes occurring inside the copper oxide layers, which serve as the starting point for nanowire growth, as well as the driving force behind the one-dimensional growth of nanowires. Additionally, we explored the effects of experimental conditions on the microstructure of the copper oxide layers and nanowires. Our findings indicate that chemical processes inside the oxide layers are influenced by copper and oxygen concentration gradients, with oxygen concentration being the key factor in determining the prevalent copper oxide phase. Moreover, the microstructure of both the oxide layers and nanowires is affected by stress and defects in the oxide layers. We found that twin boundaries in the CuO grains are the main reason for the unidirectional elongation of nanowires. Our research provides important insights into the mechanisms driving the thermal growth of copper oxide nanowires, which can aid in their synthesis and applications in various fields.

Electrical and Thermal Conductivities of Single CuxO Nanowires.

Copper oxide nanowires (NWs) are promising elements for the realization of a wide range of devices for low-power electronics, gas sensors, and energy storage applications, due to their high aspect ratio, low environmental impact, and cost-effective manufacturing. Here, we report on the electrical and thermal properties of copper oxide NWs synthetized through thermal growth directly on copper foil. Structural characterization revealed that the growth process resulted in the formation of vertically aligned NWs on the Cu growth substrate, while the investigation of chemical composition revealed that the NWs were composed of CuO rather than Cu2O. The electrical characterization of single-NW-based devices, in which single NWs were contacted by Cu electrodes, revealed that the NWs were characterized by a conductivity of 7.6 × 10-2 S∙cm-1. The effect of the metal-insulator interface at the NW-electrode contact was analyzed by comparing characterizations in two-terminal and four-terminal configurations. The effective thermal conductivity of single CuO NWs placed on a substrate was measured using Scanning Thermal Microscopy (SThM), providing a value of 2.6 W∙m-1∙K-1, and using a simple Finite Difference model, an estimate for the thermal conductivity of the nanowire itself was obtained as 3.1 W∙m-1∙K-1. By shedding new light on the electrical and thermal properties of single CuO NWs, these results can be exploited for the rational design of a wide range of optoelectronic devices based on NWs.

In search of the limits of CuO thermal oxidation nanowire growth by combining experiment and theory

In the present study, we report on the temperature limiting conditions for the growth of copper oxide nanowires via thermal oxidation of copper, which have been puzzling scientists for decades and were up until now unknown. We explore the lowest temperature limits for nanowire synthesis and find the lowest nanowire diameter that can be achieved via thermal oxidation. This was achieved by gradually lowering the temperature of the oxidation and observing when the nanowire growth will cease with the use of electron microscopy techniques. The lowest temperature, where the growth of nanowires was observed, corresponded to 187 ± 5 °C, and the lowest nanowire diameter which can be achieved was found to be between 3 and 4 nm. Experimental results are supported by theoretical modeling of the nanowire nucleation processes, providing deterministic aspects. The nanowire limiting diameter is governed by the temperature dependence of the critical nucleus size.

Optimisation of the density of copper oxide nanowires synthesized by the electrochemical technique followed by annealing

Optimisation of the density of copper oxide nanowires synthesized by the electrochemical technique followed by annealing

Humidity-dependent electrical performance of CuO nanowire networks studied by electrochemical impedance spectroscopy.

Electrochemical impedance spectroscopy was applied for studying copper oxide (CuO) nanowire networks assembled between metallic microelectrodes by dielectrophoresis. The influence of relative humidity (RH) on electrical characteristics of the CuO nanowire-based system was assessed by measurements of the impedance Z. A slight increase of Z with increasing RH at low humidity was followed by a three orders of magnitude decrease of Z at RH above 50-60%. The two opposite trends observed across the range of the examined RH of 5-97% can be caused by water chemisorption and physisorption at the nanowire interface, which suppress electronic transport inside the p-type semiconductor nanowire but enhance ionic transport in the water layers adsorbed on the nanowire surface. Possible physicochemical processes at the nanowire surface are discussed in line with equivalent circuit parameters obtained by fitting impedance spectra. The new investigation data can be useful to predict the behavior of nanostructured CuO in humid environments, which is favorable for advancing technology of nanowire-based systems suitable for sensor applications.

Ultrathin Lithiophilic 3D Arrayed Skeleton Enabling Spatial-Selection Deposition for Dendrite-Free Lithium Anodes.

Lithium metal batteries are promising to become a new generation of energy storage batteries. However, the growth of Li dendrites and the volume expansion of the anode are serious constraints to their commercial implementation. Herein, a controllable strategy is proposed to construct an ultrathin 3D hierarchical host of honeycomb copper micromesh loaded with lithiophilic copper oxide nanowires (CMMC). The uniquely designed 3D hierarchical arrayed skeletons demonstrate a surface-preferred and spatial-selective effect to homogenize local current density and relieve the volume expansion, effectively suppressing the dendrite growth. Employing the constructed CMMC current collector in a half-cell, >400 cycles with 99% coulombic efficiency at 0.5mA cm-2 is performed. The symmetric battery cycles stably for >2000 h, and the full battery delivers a capacity of 166.6 mAh g-1 . This facile and controllable approach provides an effective strategy for constructing high-performance lithium metal batteries.

Formation of sub-100-nm suspended nanowires with various materials using thermally adjusted electrospun nanofibers as templates

The air suspension and location specification properties of nanowires are crucial factors for optimizing nanowires in electronic devices and suppressing undesirable interactions with substrates. Although various strategies have been proposed to fabricate suspended nanowires, placing a nanowire in desired microstructures without material constraints or high-temperature processes remains a challenge. In this study, suspended nanowires were formed using a thermally aggregated electrospun polymer as a template. An elaborately designed microstructure enables an electrospun fiber template to be formed at the desired location during thermal treatment. Moreover, the desired thickness of the nanowires is easily controlled with the electrospun fiber templates, resulting in the parallel formation of suspended nanowires that are less than 100 nm thick. Furthermore, this approach facilitates the formation of suspended nanowires with various materials. This is accomplished by evaporating various materials onto the electrospun fiber template and by removing the template. Palladium, copper, tungsten oxide (WO3), and tin oxide nanowires are formed as examples to demonstrate the advantage of this approach in terms of nanowire material selection. Hydrogen (H2) and nitrogen dioxide (NO2) gas sensors comprising palladium and tungsten oxide, respectively, are demonstrated as exemplary devices of the proposed method.

Structure–Activity Relationship between the Superhydrophilic Nanowire Structure and the Oil Dewetting Property

Materials require specific surface structures to achieve the best performance, but achieving an optimal structural design requires a systematic study of how structure affects performance. In this work, we comprehensively and systematically investigated the structure-activity relationship between the nanowire structure and the oil dewetting self-cleaning performance. It is easy for an oil droplet to enter this structure, but it is difficult for it to escape from the gaps between the structures even under the action of water. So, the oil dewetting ability is greatly reduced, showing that this "easy to enter and difficult to exit" mode is very disadvantageous for oil desorption. Moreover, if the structure is dissolved during the test, the oil dewetting ability will be restored. The desorption effect is affected by structural parameters and reaction conditions, which further verifies the negative effect of this structure. In contrast, copper(II) oxide nanowires completely lose their self-cleaning ability due to the enhancement of hydrophobicity and oleophilicity, and the larger-diameter copper(II) oxalate nanorods exhibit a "difficult to enter and difficult to exit" mode, leading to the partial recovery of the oil dewetting performance. This study helps us deeply understand the influence of the surface microstructure on the oil dewetting performance and lay a solid foundation for further appropriate structural design.

Formation of ZnO/CuO Heterostructures Based on Quasi-One-Dimensional Nanomaterials

Nanostructured metal oxides are of great interest both for advanced research and for a wide range of applications that contribute to the increasing demands of electronics, photonics, catalysis, sensorics, and other high-tech industries and are being actively researched and developed. One-dimensional nanocrystal arrays of copper and zinc oxides have become prominent in optoelectronic devices and energy conversion systems. However, although desirable improved properties have been demonstrated, the morphology of materials containing copper and zinc oxide nanowires is extremely sensitive to synthesis conditions and difficult to control. Studies focused on the morphology control of such quasi-one-dimensional materials are not numerous, so the consideration of this issue is still relevant. The characteristics of devices based on such oxide materials can be improved by taking advantage of nanoheterojunctions. A special feature is the possibility of forming a polycrystalline heterojunction in a system of semiconductors belonging to different crystalline syngonies. Currently, much attention is devoted to developing reliable methods of obtaining such nanomaterials, including those, based on processes exploiting novel physical effects. Possibilities of synthesis by pulse-periodic laser irradiation of arrays of quasi-one-dimensional ZnO nanostructures with varying micromorphology on metallic substrates, as well as the creation of ZnO/CuO heterostructures based on ZnO nanowires, were considered. The main distinguishing feature of this approach was the use of laser-induced vibrations to intensify diffusion processes in the solid phase of metallic materials as compared to the simple effects of laser beam heating. Expanding the area of application of the advanced method of creating oxide heterostructures requires a detailed and comprehensive study of new possibilities used to form structures with improved physical properties.

CuO Nanowires Fabricated by Thermal Oxidation of Cu Foils towards Electrochemical Detection of Glucose

In view of the various stability issues and high cost of enzymatic glucose biosensors, non-enzymatic biosensors have received great attention in recent research and development. Copper oxide (CuO) nanowires (NWs) were fabricated on Cu foil substrate using a simple thermal oxidation method. The phase and morphology of the CuO NWs could be controlled by synthesis temperature. Variation in oxidation states enables CuO NWs to form Cu (III) species, which is crucial in catalysing the eletro-oxidation of glucose. The Cu-based metal/oxide composite electrode works as a non-enzymatic biosensor that adapts to the fast, dynamic change in glucose concentration, with a low saturation concentration (~0.7 mM) and a lower detection limit of 0.1 mM, making CuO NWs an excellent sensor towards impaired fasting glucose. The simplicity, cost-effectiveness and non-toxicity features of this study might make a way for potentially scalable application in glucose biosensing.