Copolymer Worms Research Articles

Light-Triggered Reversible Swelling of Azobenzene-Containing Block Copolymer Worms via Confined Deformation Prepared by Polymerization-Induced Self-Assembly.

Stimuli-responsive block copolymer nanoparticles (NPs) have received close attention in recent years owing to their tremendous application potential in smart materials. Azobenzene-containing NPs are widely studied due to the advantages of light as a stimulus and fast reversible trans-cis isomerization of azobenzene chromophores. However, the inefficient preparation process and difficult reversible transformation of morphologies limit their development. Herein it is demonstrated that the light-triggered reversible swelling behavior of wormlike NPs with high azobenzene content could be realized via confined deformation. These worms are prepared in large quantities via polymerization-induced self-assembly based on the copolymerization of 11-(4-(4-butylphenylazo)phenoxy)undecyl methacrylate (MAAz) and N-(methacryloxy)succinimide (NMAS) monomers. Upon UV/visible light irradiation, the reversible deformation of worms is achieved when the feed molar ratio of NMAS/MAAz is relatively high or via crosslinking using diamines, which leads to the reduction of the photoisomerization efficiency. The diameter variation of the worms is influenced by the amount and types of crosslinkers. Moreover, the scalability of this strategy is further proved by the fabrication of photo- and reductant-responsive crosslinked worms. It is expected that this study not only provides a new route to affording reversible photoresponsive NPs but also offers a unique insight into the reversible photodeformation mechanism of azobenzene-containing NPs.

Synthesis of Thermo-Responsive Monofunctionalized Diblock Copolymer Worms.

Poly(glycerol monomethacrylate)-block-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA) with worm-like morphology is a typical example of reversible addition-fragmentation chain transfer (RAFT) dispersion polymerized thermo-responsive copolymer via polymerization-induced self-assembly (PISA) in aqueous solution. Chain transfer agents (CTAs) are the key component in controlling RAFT, the structures of which determine the end functional groups of the polymer chain. It is therefore of interest to monofunctionalize the polymers via CTA moiety, for bioactive functionality conjugation and in the meantime maintain the precisely controlled morphology of the copolymers and the related property. In this work, a newly designed CTA 5-(2-(tert-butoxycarbonylamino) ethylamino)-2-cyano-5-oxopentan-2-yl benzodithioate (t-Boc CPDB) was synthesized and used for the RAFT polymerization of PGMA45-PHPMA120. Subsequently, PGMA45-PHPMA120 copolymers with primary amine, maleimide, and reduced L-glutathione (a tripeptide) monofunctionalized terminals were synthesized via deprotection and conjugation reactions. These monofunctionalized copolymers maintain worm-like morphology and thermo-responsive property in aqueous solution (10% w/v), as confirmed by the transmission electron microscopy (TEM) images, and the observation of the phase transition behavior in between 4 °C and room temperature (~20 °C), respectively. Summarily, a range of thermo-responsive monofunctionalized PGMA45-PHPMA120 diblock copolymer worms were successfully synthesized, which are expected to offer potential biomedical applications, such as in polymer therapeutics, drug delivery, and diagnostics.

Thermoresponsive Poly(N,N'-dimethylacrylamide)-Based Diblock Copolymer Worm Gels via RAFT Solution Polymerization: Synthesis, Characterization, and Cell Biology Applications.

RAFT solution polymerization is used to polymerize 2-hydroxypropyl methacrylate (HPMA). The resulting PHPMA precursor is then chain-extended using N,N'-dimethylacrylamide (DMAC) to produce a series of thermoresponsive PHPMA-PDMAC diblock copolymers. Such amphiphilic copolymers can be directly dispersed in ice-cold water and self-assembled at 20 °C to form spheres, worms, or vesicles depending on their copolymer composition. Construction of a pseudo-phase diagram is required to identify the pure worm phase, which corresponds to a rather narrow range of PDMAC DPs. Such worms form soft, free-standing gels in aqueous solution at around ambient temperature. Rheology studies confirm the thermoresponsive nature of such worms, which undergo a reversible worm-to-sphere on cooling below ambient temperature. This morphological transition leads to in situ degelation, and variable temperature 1H NMR studies indicate a higher degree of (partial) hydration for the weakly hydrophobic PHPMA chains at lower temperatures. The trithiocarbonate end-group located at the end of each PDMAC chain can be removed by treatment with excess hydrazine. The resulting terminal secondary thiol group can form disulfide bonds via coupling, which produces PHPMA-PDMAC-PHPMA triblock copolymer chains. Alternatively, this reactive thiol group can be used for conjugation reactions. A PHPMA141-PDMAC36 worm gel was used to store human mesenchymal stem cells (MSCs) for up to three weeks at 37 °C. MSCs retrieved from this gel subsequently underwent proliferation and maintained their ability to differentiate into osteoblastic cells.

Diblock copolymer worms stabilized pH-responsive Pickering emulsions: An efficient and recyclable platform for Claisen-Schmidt condensation reaction

Pickering emulsions were promising platforms for the heterogeneous reactions due to both their large interfacial areas and high stability, whereas both the product separation and the emulsifier recovery via simple and efficient strategies for remain a concern. In this study, we constructed an efficient and recyclable platform for interfacial catalytic reaction adopting pH-responsive n-decane-in-water Pickering emulsions. Pickering emulsions were prepared employing core cross-linked PEO45-PGMA74 (CCE45G74) diblock copolymer worms as Pickering emulsifiers. CCE45G74 diblock copolymer worms were prepared via the combination of photo-initiated polymerization induced self-assembly strategy and the core covalent cross-linking with ethylenediamine. The prepared n-decane-in-water Pickering emulsions showed a high stability during the storage at the room temperature, whereas a rapid demulsification took place at a lower pH, such as 2.5. Alkali-catalyzed Claisen-Schmidt condensation reactions between benzaldehyde and acetone were conducted in n-decane-in-water Pickering emulsions at 30 °C. The yield of dibenzylidene acetone could reach 99% after 12 h of reaction. The reaction efficiency was far higher than that at the plain n-decane-water (∼30%). This catalytic platform could be repeatedly used for three cycles.

Formation of n-Hexane-in-DMF Nonaqueous Pickering Emulsions: ABC Triblock Worms versus AB Diblock Worms.

Nonaqueous Pickering emulsions exhibit promising applications in many industrial areas but have been relatively less studied in the past. In this study, n-hexane-in-DMF nonaqueous Pickering emulsions stabilized by core cross-linked copolymer worms with mixed shells are demonstrated for the first time. Core cross-linked copolymer worms with mixed shells were prepared by seeded reversible addition-fragmentation chain transfer (RAFT) quasi-solution polymerization. Specifically, polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer worms were first prepared via RAFT-mediated dispersion polymerization in toluene under the given conditions using PS as both the macro-CTA and the stabilizer block. After the chemical cross-linking of P4VP cores, PS-P4VP diblock copolymer worms were chain-extended with LMA in DMF/toluene (1:9, weight ratio) mixed solvents, producing core cross-linked PS-P4VP-PLMA worms with PS/PLMA mixed shells. The as-prepared core cross-linked PS-P4VP-PLMA worms with mixed PS/PLMA shells were further utilized as Pickering emulsifiers for the generation of nonaqueous n-hexane-in-DMF Pickering emulsions. The emulsifying performances of mixed-shell copolymer worms were compared with those of their spherical and linear analogues with entirely identical chemical compositions as well as PS-P4VP diblock copolymer worm precursors, respectively.

Aldehyde-functional thermoresponsive diblock copolymer worm gels exhibit strong mucoadhesion.

A series of thermoresponsive diblock copolymer worm gels is prepared via reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate using a water-soluble methacrylic precursor bearing pendent cis-diol groups. Selective oxidation using an aqueous solution of sodium periodate affords the corresponding aldehyde-functional worm gels. The aldehyde groups are located within the steric stabilizer chains and the aldehyde content can be adjusted by varying the periodate/cis-diol molar ratio. These aldehyde-functional worm gels are evaluated in terms of their mucoadhesion performance with the aid of a fluorescence microscopy-based assay. Using porcine urinary bladder mucosa as a model substrate, we demonstrate that these worm gels offer a comparable degree of mucoadhesion to that afforded by chitosan, which is widely regarded to be a ‘gold standard’ positive control in this context. The optimum degree of aldehyde functionality is approximately 30%: lower degrees of functionalization lead to weaker mucoadhesion, whereas higher values compromise the desirable thermoresponsive behavior of these worm gels.

Preparation and characterisation of graphene oxide containing block copolymer worm gels.

This paper reports a generic method for preparing reinforced nanocomposite worm-gels. Aqueous poly(glycerol monomethacrylate)-b-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA) and methanolic poly(glycerol monomethacrylate)-b-poly(benzyl methacrylate) (PGMA-PBzMA) worm gels were prepared by RAFT-mediated polymerisation-induced self-assembly (PISA). The former system undergoes a reversible worm-to-sphere degelation transition upon cooling to 5 °C whilst the latter system undergoes the same transition on heating to 56 °C. This transition allows these copolymer dispersions to be readily mixed with graphene oxide (GO) whilst in a low viscosity state and form nanocomposite gels on returning to room temperature via a sphere-to-worm transition. Various quantities of GO were added to the studied copolymer dispersions at a fixed copolymer content of 15% w/w. A general trend was observed whereby relatively small quantities of GO caused the gel strength of the nanocomposite gel to be higher than that of the pristine worm-gel, as determined by oscillatory rheology. Additional quantities of GO resulted in gel weakening or prevented gel-reformation altogether. For instance, 15% w/w PGMA52-PHPMA130 worm gels had a storage modulus (G') of approximately 1.5 kPa. The addition of 1.5% w/w GO based on the copolymer caused G' to increase to approximately 4.0 kPa but >1.5% w/w GO resulted in gel strengths <1.0 kPa. A combination of aqueous electrophoresis and transmission electron microscopy measurements were used to investigate the mechanism of nanocomposite gel formation. It was observed that the PGMA-based copolymers readily absorb onto the surface of GO. Thus, the role of GO is both to strengthen the worm-gels when an optimal concentration of GO is used, but also prevent worm-reformation if too much copolymer becomes absorbed on the surface of the sheets.

Pickering Emulsions Stabilized by Diblock Copolymer Worms Prepared via Reversible Addition–Fragmentation Chain Transfer Aqueous Dispersion Polymerization: How Does the Stimulus Sensitivity Affect the Rate of Demulsification?

Responsive Pickering emulsions exhibit promising application in industry owing to the integration of the high storage stability with on-demand demulsification. In this study, stimuli-responsive Pickering emulsions stabilized by poly[oligo(ethylene glycol) methyl ether methacrylate]15-b-poly(diacetone acrylamide)120 (E15D120) worms were indicated, in which E15D120 worms were prepared via reversible addition-fragmentation chain transfer-based aqueous dispersion polymerization using thermo-sensitive POEGMA15 as both the stabilizer block and macro-chain transfer agent. The factors influencing the morphologies of copolymers during polymerization-induced self assembly have been investigated. A series of different morphological polymer nanoparticles including spheres, worms, and vesicles could be produced through rational synthesis. E15D120 worms demonstrated excellent emulsifying performances and could be used as emulsifiers to form n-dodecane-in-water Pickering emulsions at a low content. The formed n-dodecane-in-water Pickering emulsions revealed a slow demulsification at pH 10 or 70 °C or pH 10/70 °C combinations, and several hours were needed for the demulsification of Pickering emulsions. However, n-dodecane-in-water Pickering emulsions displayed a rapid demulsification (∼10 min) at an elevated temperature, such as 90 °C. The different demulsification rates were attributed to different sensitivities of E15D120 worms to external stimuli. Pickering emulsions integrating a rapid responsive demulsification with a slow one would be well satisfactory on different occasions.

Site-Directed Differentiation of Human Adipose-Derived Mesenchymal Stem Cells to Nucleus Pulposus Cells Using an Injectable Hydroxyl-Functional Diblock Copolymer Worm Gel.

Adipose-derived mesenchymal stem cells (ASCs) have been identified for their promising therapeutic potential to regenerate and repopulate the degenerate intervertebral disk (IVD), which is a major cause of lower back pain. The optimal cell delivery system remains elusive but encapsulation of cells within scaffolds is likely to offer a decisive advantage over the delivery of cells in solution by ensuring successful retention within the tissue. Herein, we evaluate the use of a fully synthetic, thermoresponsive poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA) diblock copolymer worm gel that mimics the structure of hydrophilic glycosaminoglycans. The objective was to use this gel to direct differentiation of human ASCs toward a nucleus pulposus (NP) phenotype, with or without the addition of discogenic growth factors TGFβ or GDF6. Accordingly, human ASCs were incorporated into a cold, free-flowing aqueous dispersion of the diblock copolymer, gelation induced by warming to 37 °C and cell culture was conducted for 14 days with or without such growth factors to assess the expression of characteristic NP markers compared to those produced when using collagen gels. In principle, the shear-thinning nature of the biocompatible worm gel enables encapsulated human ASCs to be injected into the IVD using a 21G needle. Moreover, we find significantly higher gene expression levels of ACAN, SOX-9, KRT8, and KR18 for ASCs encapsulated within worm gels compared to collagen scaffolds, regardless of the growth factors employed. In summary, such wholly synthetic worm gels offer considerable potential as an injectable cell delivery scaffold for the treatment of degenerate disk disease by promoting the transition of ASCs toward an NP-phenotype.

Shear-induced alignment of block copolymer worms in mineral oil.

Poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] diblock copolymer worms were synthesized directly in mineral oil via reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization at 90 °C. Free-standing gels were obtained from this polymerization-induced self-assembly (PISA) formulation when targeting PSMA13-PBzMA65 dispersions at 5% w/w to 20% w/w copolymer concentration. Gel permeation chromatography (GPC) studies indicated that almost identical copolymer chains were obtained in all cases, while transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) studies confirmed that highly anisotropic worms were formed with mean cross-sectional diameters of 11.9-13.1 nm. These worms undergo a thermoreversible worm-to-sphere transition on heating up to 150 °C. Rheological studies were conducted to characterize the shear rate- and concentration-dependent behaviour caused by this change in copolymer morphology, where the initial shear-thinning worm gels form spheres (i.e. a Newtonian fluid) on heating up to 150 °C. Complementary shear-induced polarized light imaging (SIPLI) experiments confirmed the formation of aligned linear worms under applied shear between 80 °C and 110 °C, with high-viscosity dispersions of branched worms being obtained at 20-60 °C and low-viscosity spheres being produced at 150 °C. This study informs the use of such block copolymer worms as rheology modifiers for non-polar oils, which is of potential interest for the automotive industry.

Rational synthesis of novel biocompatible thermoresponsive block copolymer worm gels.

It is well known that reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA) enables the rational design of diblock copolymer worm gels. Moreover, such hydrogels can undergo degelation on cooling below ambient temperature as a result of a worm-to-sphere transition. However, only a subset of such block copolymer worms exhibit thermoresponsive behavior. For example, PMPC26-PHPMA280 worm gels prepared using a poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC26) precursor do not undergo degelation on cooling to 6 °C (see S. Sugihara et al., J. Am. Chem. Soc., 2011, 133, 15707-15713). Informed by our recent studies (N. J. Warren et al., Macromolecules, 2018, 51, 8357-8371), we decided to reduce the mean degrees of polymerization of both the PMPC steric stabilizer block and the structure-directing PHPMA block when targeting a pure worm morphology. This rational approach reduces the hydrophobic character of the PHPMA block and hence introduces the desired thermoresponsive character, as evidenced by the worm-to-sphere transition (and concomitant degelation) that occurs on cooling a PMPC15-PHPMA150 worm gel from 40 °C to 6 °C. Moreover, worms are reconstituted on returning to 40 °C and the original gel modulus is restored. This augurs well for potential biomedical applications, which will be examined in due course. Finally, small-angle X-ray scattering studies indicated a scaling law exponent of 0.67 (≈2/3) for the relationship between the worm core cross-sectional diameter and the PHPMA DP for a series of PHPMA-based worms prepared using a range of steric stabilizer blocks, which is consistent with the strong segregation regime for such systems.

Tuning the properties of hydrogen-bonded block copolymer worm gels prepared via polymerization-induced self-assembly.

Polymerization-induced self-assembly (PISA) is exploited to design hydrogen-bonded poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] worm gels in n-dodecane. Using a carboxylic acid-based RAFT agent facilitates hydrogen bonding between neighboring worms to produce much stronger physical gels than those prepared using the analogous methyl ester-based RAFT agent. Moreover, tuning the proportion of these two types of end-groups on the PSMA chains enables the storage modulus (G′) of a 20% w/w worm gel to be tuned from ∼4.5 kPa up to ∼114 kPa. This is achieved via two complementary routes: (i) an in situ approach using binary mixtures of acid- and ester-capped PSMA stabilizer chains during PISA or (ii) a post-polymerization processing strategy using a thermally-induced worm-to-sphere transition to mix acid- and ester-functionalized spheres at 110 °C that fuse to form worms on cooling to 20 °C. SAXS and rheology studies of these hydrogen-bonded worm gels provide detailed insights into their inter-worm interactions and physical behavior, respectively. In the case of the carboxylic acid-functionalized worms, SAXS provides direct evidence for additional inter-worm interactions, while rheological studies confirm both a significant reduction in critical gelation concentration (from approximately 10% w/w to 2–3% w/w) and a substantial increase in critical gelation temperature (from 41 °C to 92 °C). It is remarkable that a rather subtle change in the chemical structure results in such improvements in gel strength, gelation efficiency and gel cohesion.

Investigating the adsorption of anisotropic diblock copolymer worms onto planar silica and nanocellulose surfaces using a quartz crystal microbalance

We report physical adsorption of highly anisotropic copolymer worms with either anionic or cationic charge onto planar silica, cellulose nanocrystal or cellulose nanofibril surfaces using a quartz crystal microbalance with dissipation monitoring.

Probing Thermoresponsive Polymerization-Induced Self-Assembly with Variable-Temperature Liquid-Cell Transmission Electron Microscopy

Summary We directly initiate and visualize the formation of polymeric nanomaterials via variable-temperature liquid-cell transmission electron microscopy (VT-LCTEM). With temperature control in the liquid cell, reversible addition-fragmentation chain transfer polymerization was thermally initiated, leading to the formation of amphiphilic block copolymers that assemble upon dispersion polymerization-induced self-assembly (PISA). In combination with traditional ex situ analyses, VT-LCTEM enabled not only the characterization of the nanoparticles in situ but also the observation of a thermal phase transition. Critically, because these assemblies form from thermoresponsive components, any temperature changes during sample preparation and analysis can alter morphologies, necessitating direct in situ characterization of reaction progression. We believe that the findings and the technique described herein will lead to unprecedented possibilities for the development and characterization of self-organizing soft matter.

A worm gel-based 3D model to elucidate the paracrine interaction between multiple myeloma and mesenchymal stem cells.

Multiple myeloma (MM) is a malignancy of terminally-differentiated plasma cells that develops mainly inside the bone marrow (BM) microenvironment. It is well known that autocrine and paracrine signals are responsible for the progression of this disease but the precise mechanism and contributions from single cell remain largely unknown. Mesenchymal stem cells (MSC) are an important cellular component of the BM: they support MM growth by increasing its survival and chemo-resistance, but little is known about the paracrine signaling pathways. Three-dimensional (3D) models of MM-MSC paracrine interactions are much more biologically-relevant than simple 2D models and are considered essential for detailed studies of MM pathogenesis.Herein we present a novel 3D co-culture model designed to mimic the paracrine interaction between MSC and MM cells. MSC were embedded within a previously characterized thermoresponsive block copolymer worm gel that can induce stasis in human pluripotent stem cells (hPSC) and then co-cultured with MM cells. Transcriptional phenotyping of co-cultured cells indicated the dysregulation of genes that code for known disease-relevant factors, and also revealed IL-6 and IL-10 as upstream regulators. Importantly, we have identified a synergistic paracrine signaling pathway between IL-6 and IL-10 that plays a critical role in sustaining MM cell proliferation.Our findings indicate that this 3D co-culture system is a useful model to investigate the paracrine interaction between MM cells and the BM microenvironment in vitro. This approach has revealed a new mechanism that promotes the proliferation of MM cells and suggested a new therapeutic target.

Probing the mechanism for hydrogel-based stasis induction in human pluripotent stem cells: is the chemical functionality of the hydrogel important?

It is well-known that pluripotent human embryonic stem cells (hPSC) can differentiate into any cell type. Recently, we reported that hPSC colonies enter stasis when immersed in an extremely soft hydrogel comprising hydroxyl-functional block copolymer worms (I. Canton, N. J. Warren, A. Chahal, K. Amps, A. Wood, R. Weightman, E. Wang, H. Moore and S. P. Armes, ACS Centr. Sci., 2016, 2, 65–74). The gel modulus and chemical structure of this synthetic hydrogel are similar to that of natural mucins, which are implicated in the mechanism of diapause for mammalian embryos. Does stasis induction occur merely because of the very soft nature of such hydrogels or does chemical functionality also play a role? Herein, we address this key question by designing a new hydrogel of comparable softness in which the PGMA stabilizer chains are replaced with non-hydroxylated poly(ethylene glycol) [PEG]. Immunolabeling studies confirm that hPSC colonies immersed in such PEG-based hydrogels do not enter stasis but instead proliferate (and differentiate if no adhesion substrate is present). However, pluripotency is retained if an appropriate adhesion substrate is provided. Thus, the chemical functionality of the hydrogel clearly plays a decisive role in the stasis induction mechanism.

Influence of an ionic comonomer on polymerization-induced self-assembly of diblock copolymers in non-polar media

Incorporating an appropriate ionic comonomer into a polymerization-induced self-assembly (PISA) formulation can provide convenient access to block copolymer worms and vesicles in non-polar media, in addition to spheres.

Tuning the hydroxyl functionality of block copolymer worm gels modulates their thermoresponsive behavior

Partial replacement of a hydroxyl-functional steric stabilizer with a poly(ethylene glycol)-based stabilizer modulates the thermoresponsive behavior of block copolymer worm gels prepared via aqueous polymerization-induced self-assembly.

Effect of Core Cross-linking on the Physical Properties of Poly(dimethylsiloxane)-Based Diblock Copolymer Worms Prepared in Silicone Oil

A trithiocarbonate-capped poly(dimethylsiloxane) (PDMS) precursor is chain-extended via reversible addition–fragmentation chain transfer dispersion polymerization of 2-(dimethylamino)ethyl methacrylate (DMA) in decamethylcyclopentasiloxane (D5) silicone oil at 90 °C. For a fixed mean degree of polymerization (DP) of 66 for the PDMS steric stabilizer block, targeting core-forming PDMA block DPs of between 105 and 190 enables the preparation of either well-defined worms or vesicles at a copolymer concentration of 25% w/w. The as-synthesized linear PDMS66–PDMA100 worms exhibit thermoresponsive behavior in D5, undergoing a worm-to-sphere transition on heating to 100 °C. Variable temperature 1H NMR spectroscopy indicates that this thermal transition is driven by reversible solvent plasticization of the PDMA cores. This change in copolymer morphology is characterized by transmission electron microscopy (TEM) studies, variable temperature dynamic light scattering and small-angle X-ray scattering experiments. Oscillatory rheology studies indicate that degelation occurs at 32 °C, but shear-induced polarized light imaging measurements suggest that full conversion of worms into spheres requires significantly higher temperatures (∼110 °C). 1,2-Bis(2-iodoethoxy)ethane (BIEE) is evaluated as a cross-linker for PDMS66–PDMAx diblock copolymer nano-objects in D5. This bifunctional reagent quaternizes the tertiary amine groups on the DMA residues within the worm cores, introducing cross-links via the Menshutkin reaction. TEM studies confirm that such covalently-stabilized worms no longer undergo a worm-to-sphere transition when heated to 100 °C. Kinetic studies performed on PDMS66–PDMA176 vesicles suggest that cross-linking requires approximately 13 h at 20 °C to ensure that these nano-objects remain intact when dispersed in chloroform, which is a good solvent for both blocks. Oscillatory rheology studies of a PDMS66–PDMA100 worm gel indicated that covalent stabilization using a BIEE/DMA molar ratio of 0.15 increased its dynamic elastic modulus (G′) by almost two orders of magnitude. Furthermore, such cross-linked worms exhibit a much lower critical gelation concentration (∼2% w/w) compared to that of the linear precursor worms (∼12% w/w).

Aqueous one-pot synthesis of epoxy-functional diblock copolymer worms from a single monomer: new anisotropic scaffolds for potential charge storage applications

The one-pot synthesis of highly anisotropic epoxy-functional diblock copolymer worms is achieved directly in water using a single monomer (glycidyl methacrylate).