Copolymer Vesicles Research Articles

Aqueous RAFT Dispersion Polymerization Mediated by an ω,ω-Macromolecular Chain Transfer Monomer: An Efficient Approach for Amphiphilic Branched Block Copolymers and the Assemblies.

Herein, an ω,ω-macromolecular chain transfer monomer (macro-CTM) containing a RAFT (reversible addition-fragmentation chain transfer) group and a methacryloyl group was synthesized and used to mediate photoinitiated RAFT dispersion polymerization of hydroxypropyl methacrylate (HPMA) in water. The macro-CTM undergoes a self-condensing vinyl polymerization (SCVP) mechanism under RAFT dispersion polymerization conditions, leading to the formation of amphiphilic branched block copolymers and the assemblies. Compared with RAFT solution polymerization, it was found that the SCVP process was promoted under RAFT dispersion polymerization conditions. Morphologies of branched block copolymer assemblies could be controlled by varying the monomer concentration and the [HPMA]/[macro-CTM] ratio. The branched block copolymer vesicles could be used as seeds for seeded RAFT emulsion polymerization, and framboidal vesicles were successfully obtained. Finally, degrees of branching of branched block copolymers could be further controlled by using a binary mixture of the macro-CTM and a linear macro-RAFT agent or a small molecule CTM. We believe that this study not only provides a versatile strategy for the preparation of branched block copolymer assemblies but also offers important insights into polymer synthesis via heterogeneous RAFT polymerization.

Capturing Enzyme-Loaded Diblock Copolymer Vesicles Using an Aldehyde-Functionalized Hydrophilic Polymer Brush.

Compared to lipids, block copolymer vesicles are potentially robust nanocontainers for enzymes owing to their enhanced chemical stability, particularly in challenging environments. Herein we report that cis-diol-functional diblock copolymer vesicles can be chemically adsorbed onto a hydrophilic aldehyde-functional polymer brush via acetal bond formation under mild conditions (pH 5.5, 20 °C). Quartz crystal microbalance studies indicated an adsorbed amount, Γ, of 158 mg m-2 for vesicle adsorption onto such brushes, whereas negligible adsorption (Γ = 0.1 mg m-2) was observed for a control experiment conducted using a cis-diol-functionalized brush. Scanning electron microscopy and ellipsometry studies indicated a mean surface coverage of around 30% at the brush surface, which suggests reasonably efficient chemical adsorption. Importantly, such vesicles can be conveniently loaded with a model enzyme (horseradish peroxidase, HRP) using an aqueous polymerization-induced self-assembly formulation. Moreover, the immobilized vesicles remained permeable toward small molecules while retaining their enzyme payload. The enzymatic activity of such HRP-loaded vesicles was demonstrated using a well-established colorimetric assay. In principle, this efficient vesicle-on-brush strategy can be applied to a wide range of enzymes and functional proteins for the design of next-generation immobilized nanoreactors for enzyme-mediated catalysis.

Analysis of individual nanoscale block copolymer vesicles by atomic force microscopy combined with time-resolved fluorescence microscopy

Abstract We report on the analysis of individual dye loaded block copolymer (BCP) vesicles via a combination of confocal laser scanning microscopy (CSLM)/fluorescence lifetime imaging microscopy (FLIM) on the one hand and atomic force microscopy (AFM) on the other hand. AFM measurements on ATTO 647N-loaded poly(styrene-block-poly(acrylic acid)) (PS115-b-PAA15) vesicles were carried out with high spatial resolution and afforded morphology and dimensions of BCP vesicles on solid substrates. By contrast the CSLM and FLIM data are diffraction limited, but from the time resolved fluorescence data information on the local vicinity of the reporter dye can be extracted. In the combined experiment individual dye-loaded vesicles and vesicle aggregates were discerned, analyzed metrologically by AFM and in more detail by CSLM and FLIM. On the basis of FLIM data the partitioning of the reporter dye was analyzed. The dye resides preferentially in the hydrophilic corona inside the vesicles. The dye concentration in the polymersome was about 90 times higher than in the solution used for encapsulation. These results underline that the combination of AFM with sensitive optical techniques, especially FLIM, is a promising approach for obtaining a deeper understanding of molecular interactions and nanoenvironments in supramolecular macromolecular structures and beyond.

A dissipative particle dynamics simulation of controlled loading and responsive release of theranostic agents from reversible crosslinked triblock copolymer vesicles.

To control the transport stability and release efficiency of loaded theranostic drugs in triblock copolymer carriers, the reversible crosslinking ability is of great significance. A molecular level exploration of such a function is needed to extend existing stabilizing and responsive dissociation mechanisms of carriers. Here, dissipative particle dynamics simulations were used to first demonstrate the formation of triblock copolymer vesicular carriers. Chemical crosslinking was used to strengthen the structural stability of the vesicle shell to avoid drug leakage. Reversible decrosslinking along with dissociation of the vesicle and release of loaded drugs were then explored. The structural, energetic and dynamical properties of the system were discussed at the molecular level. The regulation mechanism of drug release patterns was revealed by systematically exploring the effect of intra and intermolecular repulsive interactions. The results indicate that the chemical crosslinking of copolymers enhanced the compactness of the vesicle shell with a strengthened microstructure, increased binding energy, and limited chain migration, thus achieving more stable delivery of drugs. In terms of drug release, we clarified how the pairwise interactions of beads in the solution system affect the responsive dissociation of the vesicle and associated release patterns (speed and amount) of drugs. More efficient delivery and smart release of theranostic drugs are achieved using such reversible crosslinked triblock copolymer vesicles.

Multifunctional Polymer Vesicles for Synergistic Antibiotic-Antioxidant Treatment of Bacterial Keratitis.

As an acute ophthalmic infection, bacterial keratitis (BK) can lead to severe visual morbidity, such as corneal perforation, intraocular infection, and permanent corneal opacity, if rapid and effective treatments are not available. In addition to eradicating pathogenic bacteria, protecting corneal tissue from oxidative damage and promoting wound healing by relieving inflammation are equally critical for the efficient treatment of BK. Besides, it is very necessary to improve the bioavailability of drugs by enhancing the ocular surface adhesion and corneal permeability. In this investigation, therefore, a synergistic antibiotic-antioxidant treatment of BK was achieved based on multifunctional block copolymer vesicles, within which ciprofloxacin (CIP) was simultaneously encapsulated during the self-assembly. Due to the phenylboronic acid residues in the corona layer, these vesicles exhibited enhanced muco-adhesion, deep corneal epithelial penetration, and bacteria-targeting, which facilitated the drug delivery to corneal bacterial infection sites. Additionally, the abundant thioether moieties in the hydrophobic membrane enabled the vesicles to both have ROS-scavenging capacity and accelerated CIP release at the inflammatory corneal tissue. In vivo experiments on a mice model demonstrated that the multifunctional polymer vesicles achieved efficient treatment of BK, owing to the enhanced corneal adhesion and penetration, bacteria targeting, ROS-triggered CIP release, and the combined antioxidant-antibiotic therapy. This synergistic strategy holds great potential in the treatment of BK and other diseases associated with bacterial infections.

Hybrid Polymer Vesicles: Controllable Preparation and Potential Applications.

Hybrid polymer vesicles contain functional nanoparticles (NPs) in their walls, interfaces, coronae, or cavities. NPs render the hybrid vesicles with specific physical properties, while polymers endow them with structural stability and may significantly reduce the high toxicity of NPs. Therefore, hybrid vesicles integrate fascinating multifunctions from both NPs and polymeric vesicles, which have gained tremendous attention because of their diverse promising applications. Various types of delicate hybrid polymeric vesicles with size control and tunable localization of NPs in different parts of vesicles have been constructed via in situ and ex situ strategies, respectively. Their potential applications have been widely explored, as well. This review presents the progress of block copolymer (BCP) vesicle systems containing different types of NPs including metal NPs, magnetic NPs, and semiconducting quantum dots (QDs), etc. The strategies for controlling the location of NPs within hybrid vesicles are discussed. Typical potential applications of the elegant hybrid vesicles are also highlighted.

Direct Radiolabeling of Trastuzumab-Targeting Triblock Copolymer Vesicles with 89Zr for Positron Emission Tomography Imaging.

Radiolabeled drug nanocarriers that can be easily imaged via positron emission tomography (PET) are highly significant as their in vivo outcome can be quantitatively PET-traced with high sensitivity. However, typical radiolabeling of most PET-guided theranostic vehicles utilizes modification with chelator ligands, which presents various challenges. In addition, unlike passive tumor targeting, specific targeting of drug delivery vehicles via binding affinity to overexpressed cancer cell receptors is crucial to improve the theranostic delivery to tumors. Herein, we developed 89Zr-labeled triblock copolymer polymersomes of 60 nm size through chelator-free radiolabeling. The polymersomes are assembled from poly(N-vinylpyrrolidone)5-b-poly(dimethylsiloxane)30-b-poly(N-vinylpyrrolidone)5 (PVPON5-PDMS30-PVPON5) triblock copolymers followed by adsorption of a degradable tannin, tannic acid (TA), on the polymersome surface through hydrogen bonding. TA serves as an anchoring layer for both 89Zr radionuclide and targeting recombinant humanized monoclonal antibody, trastuzumab (Tmab). Unlike bare PVPON5-PDMS30-PVPON5 polymersomes, TA- and Tmab-modified polymersomes demonstrated a high radiochemical yield of more than 95%. Excellent retention of 89Zr by the vesicle membrane for up to 7 days was confirmed by PET in vivo imaging. Animal biodistribution using healthy BALB/c mice confirmed the clearance of 89Zr-labeled polymersomes through the spleen and liver without their accumulation in bone, unlike the free nonbound 89Zr radiotracer. The 89Zr-radiolabeled polymersomes were found to specifically target BT474 HER2-positive breast cancer cells via the Tmab-TA complex on the vesicle surface. The noncovalent Tmab anchoring to the polymersome membrane can be highly advantageous for nanoparticle modification compared to currently developed covalent methods, as it allows easy and quick integration of a broad range of targeting proteins. Given the ability of these polymersomes to encapsulate and release anticancer therapeutics, they can be further expanded as precision-targeted therapeutic carriers for advancing human health through highly effective drug delivery strategies.

Fluorine-Containing Triblock Copolymer Vesicles with Microphase-Separated Structure

Introduction of a fluorine-containing block into block copolymers is an effective method to tune block copolymer nanoassemblies with a microphase-separated structure. However, this microphase-separated structure is difficult to clearly observe due to its nanoscale size. In this work, fluorine-containing ABC triblock copolymer vesicles of poly(ethylene glycol)-block-polystyrene-block-poly(4-vinylbenzyl pentafluorophenyl ether) (PEG-b-PS-b-PVBFP) are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization under dispersed condition. Owing to the choice of a suitable degree of polymerization of the three blocks, the synthesized PEG45-b-PS197-b-PVBFP233 vesicles have a relatively large size of around 216 nm and a thin vesicular membrane with a thickness of around 28 nm. Ascribed to the relatively large size of the vesicles and the thin vesicular membrane, it is concluded that the fluorine-containing PVBFP block forms 9 nm columnar microdomains shielded by the PS phase in the vesicular membrane.

Redox-dual-sensitive multiblock copolymer vesicles with disulfide-enabled sequential drug delivery.

Based on disulfide-enriched multiblock copolymer vesicles, we present a straightforward sequential drug delivery system with dual-redox response that releases hydrophilic doxorubicin hydrochloride (DOX·HCl) and hydrophobic paclitaxel (PTX) under oxidative and reductive conditions, respectively. When compared to concurrent therapeutic delivery, the spatiotemporal control of drug release allows for an improved combination antitumor effect. The simple and smart nanocarrier has promising applications in the field of cancer therapy.

Polymer Vesicles in a Nanochannel under Flow Fields: A DPD Simulation Study

AbstractThe general lack of knowledge on the dynamics of polymer vesicles under flow field has confounded their applications in drug delivery and other fields. Therefore, dissipative particle dynamics (DPD) simulations on the dynamic behavior of diblock copolymer vesicles in a nanochannel under Poiseuille flow are conducted. The simulation results show that the block copolymer vesicles with hydrophobic blocks of different rigidities exhibit significantly different mechanical stabilities under the flow fields. With increasing the Reynolds number, the coil–coil block copolymer vesicles undergo a shape transition from spherical to bullet‐like to asymmetric and eventually split into two parts. In contrast, the rod–coil block copolymer vesicles deform from spherical to bullet‐like to parachute‐like structures and ultimately ruptured. The flow‐induced distortion and reorganization of copolymers mainly cause the deformation of vesicles. The distinguished motions of the block copolymers with different rigid blocks lead to the distinct performance of the vesicles. The findings could help understand the flow behavior of polymer vesicles in a nanochannel or a blood vessel and assist the design of bio‐functional polymersomes.

Oxidation-responsive framboidal triblock copolymer vesicles prepared by photoinitiated RAFT seeded emulsion polymerization

Stimulus-responsive vesicles have broad applications in a variety of areas. Herein, oxidation-responsive framboidal triblock copolymer vesicles are prepared by photoinitiated RAFT seeded emulsion polymerization of a thioether-functionalized monomer using diblock copolymer vesicles as seeds. The obtained framboidal vesicles can transform into worms or spheres in the presence of reactive oxygen species, which can be further used for controlled release of cargos (e.g., silica nanoparticles).

Isothermal Titration Calorimetry Directly Measures the Selective Swelling of Block Copolymer Vesicles in the Presence of Organic Acid.

Block copolymer (BCP) vesicles loaded with drug molecules may have a nonidentical swelling behavior due to the strong interactions between BCP vesicles and loaded molecules. A thermodynamic study of the swelling for such a system is of great importance in clarifying their pH-gated drug delivery behavior. In this study, the selective swelling of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) vesicles in the presence of different acids was compared using dynamic light scattering, zeta-potential, and isothermal titration calorimetry (ITC) measurements. Transmission electron microscopy observation verified that these PS-b-P2VP vesicles were mainly multilamellar. Importantly, using the ITC measurement, we first compared the thermodynamic parameters, including ΔH, ΔG, and ΔS, association binding sites (N), and binding association constants (Ka) in the selective swelling of the PS-b-P2VP vesicles in low pH (pH ∼3.5), with or without a hydrogen bonding interaction. We observed that the existence of a hydrogen bonding interaction between tartaric acid/malic acid and PS-b-P2VP generates a limitation to the selective swelling of PS-b-P2VP vesicles, in which conditions will depend on the molecular structures of the organic acids and PS-b-P2VP. This work first provides a quantitative insight on the swelling of BCP vesicles in the presence of hydrogen bonding and highlights the power of ITC measurements for investigating the structural transformation of polymer nanostructures.

Simultaneous Synthesis and Self-Assembly of Bottlebrush Block Copolymers at Room Temperature via Photoinitiated RAFT Dispersion Polymerization.

Bottlebrush polymers exhibiting unique properties have attracted considerable attention for applications in many research areas. Herein, the first simultaneous synthesis and self-assembly of bottlebrush block copolymers at room temperature via photoinitiated polymerization-induced self-assembly (photo-PISA) using multifunctional macromolecular chain transfer agents (macro-CTAs) is reported. Comparing with linear block copolymers, the bottlebrush block copolymers can promote the formation of higher-order morphologies (e.g., vesicles) when targeting similar degrees of polymerization (DPs). Moreover, a higher polymerization rate is observed in the case of bottlebrush block copolymers. Gel permeation chromatography (GPC) analysis shows that good polymerization control is maintained when synthesizing bottlebrush block copolymers by photo-PISA. Finally, the obtained bottlebrush block copolymer vesicles are used as seeds for further chain extension and multicompartment nanoparticles with a sponge internal structure are formed. It is expected that this study will not only expand polymer architectures employed in PISA, but also provide a new strategy to synthesize polymer nanoparticles with unique structures.

Block Copolymer Vesicles with Tunable Membrane Thicknesses and Compositions Prepared by Aqueous Seeded Photoinitiated Polymerization-Induced Self-Assembly at Room Temperature.

Block copolymer vesicles with diverse functionalities and intrinsic hollow structures have received considerable attention due to their broad applications in biomedical fields, including drug delivery, bioimaging, theranostics, gene therapy, etc. However, efficient preparation of block copolymer vesicles with tunable membrane thicknesses and compositions under mild conditions is still a challenge. Herein, we report an aqueous seeded photoinitiated polymerization-induced self-assembly (photo-PISA) for the precise preparation of block copolymer vesicles at room temperature. By changing the total degree of polymerization (DP) of the hydrophobic block in seeded photo-PISA, one can easily tune the membrane thickness without compromising the morphology of vesicles. Moreover, by adding different comonomers such as hydrophobic monomers, hydrophilic monomers, and cross-linkers into seeded photo-PISA, vesicles with different compositions could be prepared without compromising the morphology and colloidal stability. Polymerization kinetics show that seeded photo-PISA can skip the step of in situ self-assembly with a short homogeneous polymerization stage being observed. To demonstrate potential biological applications, enzymatic nanoreactors were constructed by loading horseradish peroxidase (HRP) inside vesicles via seeded photo-PISA. The enzymatic properties of these nanoreactors could be easily regulated by changing the membrane thickness and hydrophobicity. It is expected that this method can provide a facile platform for the precise preparation of block copolymer vesicles that may find applications in different fields.

Polymerization-induced self-assembly and disassembly during the synthesis of thermoresponsive ABC triblock copolymer nano-objects in aqueous solution.

Polymerization-induced self-assembly (PISA) has been widely utilized as a powerful methodology for the preparation of various self-assembled AB diblock copolymer nano-objects in aqueous media. Moreover, it is well-documented that chain extension of AB diblock copolymer vesicles using a range of hydrophobic monomers via seeded RAFT aqueous emulsion polymerization produces framboidal ABC triblock copolymer vesicles with adjustable surface roughness owing to microphase separation between the two enthalpically incompatible hydrophobic blocks located within their membranes. However, the utilization of hydrophilic monomers for the chain extension of linear diblock copolymer vesicles has yet to be thoroughly explored; this omission is addressed for aqueous PISA formulations in the present study. Herein poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) (G-H) vesicles were used as seeds for the RAFT aqueous dispersion polymerization of oligo(ethylene glycol) methyl ether methacrylate (OEGMA). Interestingly, this led to polymerization-induced disassembly (PIDA), with the initial precursor vesicles being converted into lower-order worms or spheres depending on the target mean degree of polymerization (DP) for the corona-forming POEGMA block. Moreover, construction of a pseudo-phase diagram revealed an unexpected copolymer concentration dependence for this PIDA formulation. Previously, we reported that PHPMA-based diblock copolymer nano-objects only exhibit thermoresponsive behavior over a relatively narrow range of compositions and DPs (see Warren et al., Macromolecules, 2018, 51, 8357–8371). However, introduction of the POEGMA coronal block produced thermoresponsive ABC triblock nano-objects even when the precursor G-H diblock copolymer vesicles proved to be thermally unresponsive. Thus, this new approach is expected to enable the rational design of new nano-objects with tunable composition, copolymer architectures and stimulus-responsive behavior.

Silica nanoparticle-loaded thermoresponsive block copolymer vesicles: a new post-polymerization encapsulation strategy and thermally triggered release.

A thermoresponsive amphiphilic diblock copolymer that can form spheres, worms or vesicles in aqueous media at neutral pH by simply raising the dispersion temperature from 1 °C (spheres) to 25 °C (worms) to 50 °C (vesicles) is prepared via polymerization-induced self-assembly (PISA). Heating such an aqueous copolymer dispersion from 1 °C up to 50 °C in the presence of 19 nm glycerol-functionalized silica nanoparticles enables this remarkable ‘shape-shifting’ behavior to be exploited as a new post-polymerization encapsulation strategy. The silica-loaded vesicles formed at 50 °C are then crosslinked using a disulfide-based dihydrazide reagent. Such covalent stabilization enables the dispersion to be cooled to room temperature without loss of the vesicle morphology, thus aiding characterization and enabling the loading efficiency to be determined as a function of both copolymer and silica concentration. Small-angle X-ray scattering (SAXS) analysis indicated a mean vesicle membrane thickness of approximately 20 ± 2 nm for the linear vesicles and TEM studies confirmed encapsulation of the silica nanoparticles within these nano-objects. After removal of the non-encapsulated silica nanoparticles via multiple centrifugation–redispersion cycles, thermogravimetric analysis indicated that vesicle loading efficiencies of up to 86% can be achieved under optimized conditions. Thermally-triggered release of the silica nanoparticles is achieved by cleaving the disulfide bonds at 50 °C using tris(2-carboxyethyl)phosphine (TCEP), followed by cooling to 20 °C to induce vesicle dissociation. SAXS is also used to confirm the release of silica nanoparticles by monitoring the disappearance of the structure factor peak arising from silica–silica interactions.

Homopolymer-Assisted Fusions of Polymer Brushes and Block Copolymer Vesicles

The applications of materials are closely associated with surface structures and properties. Surface coassembly of block copolymers (BCPs) and polymer brushes is an effective method to fabricate surface structures with tunable properties. The surface coassembly approach not only provides a method for the fabrication of surface structures but also provides a method for the synthesis of hybrid materials with hierarchical nanostructures. In this research, polystyrene (PS)-assisted fusions of PS brushes on silica particles and BCP vesicles in a surface coassembly process are studied. The concentrations of BCP and PS homopolymer are two key parameters in the fusion process. When the BCP concentration is held constant at 3 mg/mL, with an increase in PS concentration, aggregation of silica particles and the fusions of polymer brushes and BCP vesicles are observed. When the BCP concentration is kept at 8 mg/mL, large hybrid compound structures composed of silica particles and the fused vesicles are formed. In the surface coassembly process, the addition of PS leads to an increased volume percentage of the solvophobic component in the system. To reduce the surface energy and the unfavorable contact between the solvent and PS, silica particles with PS brushes and BCP vesicles are fused into large compound structures. A variety of hybrid materials with hierarchical macro-/mesostructures can be fabricated by using this method.

Aldehyde-Functional Diblock Copolymer Nano-objects via RAFT Aqueous Dispersion Polymerization.

We report the rational design of aldehyde-functional sterically stabilized diblock copolymer nano-objects in aqueous solution via polymerization-induced self-assembly. More specifically, reversible addition-fragmentation chain transfer aqueous dispersion polymerization of 2-hydroxypropyl methacrylate is conducted using a water-soluble precursor block in which every methacrylic repeat unit contains a pendent oligo(ethylene glycol) side chain capped with a cis-diol unit. Systematic variation of the reaction conditions enables the construction of a pseudo-phase diagram, which ensures the reproducible targeting of pure spheres, worms, or vesicles. Selective oxidation of the pendent cis-diol groups using aqueous sodium periodate under mild conditions introduces geminal diols (i.e., the hydrated form of an aldehyde obtained in the presence of water) into the steric stabilizer chains without loss of colloidal stability. In the case of diblock copolymer vesicles, such derivatization leads to the formation of a worm population, indicating partial loss of the original morphology. However, this problem can be circumvented by cross-linking the membrane-forming block prior to periodate oxidation. Moreover, such covalently stabilized aldehyde-functionalized vesicles can be subsequently reacted with either glycine or histidine in aqueous solution, followed by reductive amination to prevent hydrolysis of the labile imine bond. ζ potential measurements confirm that this derivatization significantly affects the electrophoretic behavior of these vesicles. Similarly, the membrane-crosslinked aldehyde-functionalized vesicles can be reacted with a model globular protein, bovine serum albumin, to produce "stealthy" protein-decorated vesicles.

Green Stereoregular Polymerization of Poly(methyl methacrylate)s Through Vesicular Catalysis

Green Stereoregular Polymerization of Poly(methyl methacrylate)s Through Vesicular Catalysis

Liposome-based measurement of light-driven chloride transport kinetics of halorhodopsin

We report a simple and direct fluorimetric vesicle-based method for measuring the transport rate of the light-driven ions pumps as specifically applied to the chloride pump, halorhodopsin, from Natronomonas pharaonis (pHR). Previous measurements were cell-based and methods to determine average single channel permeability challenging. We used a water-in-oil emulsion method for directional pHR reconstitution into two different types of vesicles: lipid vesicles and asymmetric lipid-block copolymer vesicles. We then used stopped-flow experiments combined with fluorescence correlation spectroscopy to determine per protein Cl- transport rates. We obtained a Cl− transport rate of 442 (±17.7) Cl−/protein/s in egg phosphatidyl choline (PC) lipid vesicles and 413 (±26) Cl−/protein/s in hybrid block copolymer/lipid (BCP/PC) vesicles with polybutadine-polyethylene oxide (PB12PEO8) on the outer leaflet and PC in the inner leaflet at a photon flux of 1450 photons/protein/s. Normalizing to a per photon basis, this corresponds to 0.30 (±0.07) Cl−/photon and 0.28 (±0.04) Cl−/photon for pure PC and BCP/PC hybrid vesicles respectively, both of which are in agreement with recently reported turnover of ~500 Cl−/protein/s from flash photolysis experiments and with voltage-clamp measurements of 0.35 (±0.16) Cl−/photon in pHR-expressing oocytes as well as with a pHR quantum efficiency of ~30%.