Copolymer Brushes Research Articles

The Role of Interfacial Effects in the Impedance of Nanostructured Solid Polymer Electrolytes

The role of interfacial effects on an ion-conducting poly(styrene-b-ethylene oxide) (PS-b-PEO or SEO) diblock copolymer doped with lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) was investigated by electrochemical impedance spectroscopy (EIS). Coating the surface of commonly used stainless steel electrodes with a specific random copolymer brush increases the measured ionic conductivity by more than an order of magnitude compared to the uncoated electrodes. The increase in ionic conductivity is related to the interfacial structure of the block copolymer domain morphology on the electrode surface. We show that the impedance associated with the electrode–electrolyte interface can be detected using nonmetallic electrodes, allowing us to distinguish the ionic conductivity behaviors of the bulk electrolyte and the interfacial layers for both as-prepared and annealed samples.

Inhibition of bacteria adhesion and biofilm formation using a precisely structured nitric oxide-releasing coating with repeatedly renewing antimicrobial and antifouling ability

Bacterial adhesion and colonization usually causes the formation of biofilm that cannot be easily eradicated by common antibiotics and disinfectants. Surface covalent immobilization of nitric oxide (NO)-releasing polymer is an effective surface modification strategy to combat the threat from bacteria. Although surface covalent strategy avoided the leaching of toxic NO donors, the existence of hydrophobic NO donors on topsurface could inevitably accelerate the microorganism adhesion and accumulation, and the NO-releasing period of time was still very limited. In this work, we prepared an antimicrobial and antibiofilm surface via tethering a precision-structured NO-releasing copolymer brush to an organic-inorganic hybrid hard coating (> 5H pencil hardness) on one end. The precision-structured diblock copolymer brush was composed of a surface antifouling block and a subsurface antimicrobial block of NO-releasing units. A typical effect of “kill two birds with one stone” was observed, the NO releasing subsurface segment within a polymeric matrix prolongs NO release while also preventing surface fouling caused by hydrophobic NO donors on top surface. The impacts of polymer architecture on bioactivity was detailed investigated, and the block copolymer brush exhibited the optimal inhibitory effects against bacteria colonization and biofilm formation. The developed bioactive diblock copolymer brush was grafted from a hard hybrid persistent coating that embeds considerable initiation sites for surface modification. Thanks to the presence of initiator throughout the hybrid network, the initiation layer could initiate polymerization repeatedly after the polymer brushes are worn off at high pressure. Thus, the coating exhibited repeatedly renewing antimicrobial and antifouling ability after multiple abrasion cycles. This work not only developed a novel strategy for regulating NO releasing via modulating the polymer architecture, but provided a feasible route for obtaining a robust initiator layer for synthesizing polymer brush for antimicrobial and antifouling applications.

Insight into the Solution Self-Assembly of Amphiphilic Asymmetric Brush Copolymers via Computer Simulations

Insight into the Solution Self-Assembly of Amphiphilic Asymmetric Brush Copolymers via Computer Simulations

Esterified styrene-maleic acid copolymer modified silica as mixed-mode polymer-brush stationary phases for chromatographic separation

Styrene-maleic acid (SMA) copolymer has received much attention for its excellent solubilization characteristics. In this work, SMA copolymer brush-based chromatographic stationary phases were exploited and developed for the first time. First, SMA copolymer brush was in situ grown on the surface of spherical silica via living/controlled reversible addition-fragmentation chain transfer (RAFT) polymerization method. Subsequently, as a proof-of-concept demonstration, the copolymer was esterified by diethylene glycol mono-2-ethylhexyl ether (DGME) and 2-(2-ethylhexyloxy) ethanol (EHOE), respectively. The obtained Sil-SMA-DGME and Sil-SMA-EHOE copolymer-brush chromatographic stationary phases were characterized by transmission electron microscopy, Fourier transform infrared spectrometer, X-ray photoelectron spectroscopy, and thermogravimetric analysis, respectively. The chromatographic retention mechanism indicated that both the two packed columns exhibited hydrophilic/reverse mixed-mode retention modes. The maximum column efficiency was up to 71,000 N/m. The chromatographic separation performance evaluation indicated that the novel kind of stationary phases had excellent separation capabilities for hydrophilic, hydrophobic compounds and phospholipid standards. In addition, by combination with mass spectrometry identification, the Sil-SMA-DGME column was further exploited for separation and identification of phospholipids in human lung cancer cells. Totally, 9 classes including 186 phospholipid species were successfully identified. The results demonstrated the promising application prospects of the novel kind of SMA copolymer-brush chromatographic stationary phases.

Biotinylated polyaminoacid-based nanoparticles for the targeted delivery of lenvatinib towards hepatocarcinoma

In this work, we describe the development of targeted polymeric nanoparticles loaded with lenvatinib for the treatment of hepatocellular carcinoma (HCC). A synthetic brush copolymer (PHEA-g-BIB-pButMA-g-PEG-biotin) was synthesized from α-poly(N-2-hydroxyethyl)-D,L-aspartamide (PHEA) by a three-step reaction involving atom transfer radical polymerisation (ATRP) to graft hydrophobic polybutylmethacrylate pendant groups and further conjugation with biotinylated polyethylene glycol via carbonate ester. Subsequently, lenvatinib-loaded nanoparticles were obtained and characterized demonstrating colloidal size, negative zeta potential, biotin exposure on the surface and the ability to release lenvatinib in a sustained manner. Lenvatinib-loaded nanoparticles were tested in vitro on HCC cells to evaluate their anticancer efficacy compared to free drug. Furthermore, the enhanced in vivo efficacy of lenvatinib-loaded nanoparticles on nude mice HCC xenograft models was demonstrated by evaluating tumor burdens, apoptotic markers and histological scores after administration of lenvatinib-nanoparticles via intraperitoneal or oral route. Finally, in vivo biodistribution studies were performed, demonstrating the ability of the prepared drug delivery systems to significantly accumulate in the solid tumor by active targeting, due to the presence of biotin on the nanoparticle surface.

Directed Self-Assembly by Sparsely Prepatterned Substrates with Self-Responsive Polymer Brushes.

The guiding pattern in the chemoepitaxially directed self-assembly (DSA) of block copolymers is often fabricated by periodically functionalizing homogeneously random copolymer brushes tethered on a substrate. The prepatterned copolymer brushes constitute a soft penetrable surface, and their two components can in principle locally segregate in response to the overlying self-assembly process of block copolymers. To reveal how the self-responsive behavior of the copolymer brushes affects the directing effect, we develop a dissipative particle dynamics model to explicitly include the prepatterned polymer brushes and implement it to simulate the DSA of a cylinder-forming diblock copolymer melt on the sparse pattern of polymer brushes. Through large-scale dynamic simulations, we identify the windows of the content of the random copolymer, the film thickness, and the diameter of the patterned spot, for the formation of perfectly ordered hexagonal patterns composed of perpendicular cylinders. Our dynamic simulations reveal that the random copolymer brushes grafted on the unpatterned area exhibit a remarkable self-responsive ability with respect to the self-assembly of the diblock copolymers overlying them, which may widen the effective window of the content of the random copolymer. Within the processing windows of these key parameters, defect-free patterns are successfully achieved both in simulations and in experiments with sizes as large as a few micrometers for 4-fold density multiplications. This work demonstrates that highly efficient computer simulations based on an effective model can provide helpful guidance for experiments to optimize the critical parameters and even may promote the application of DSA.

Temperature-modulated interactions between thermoresponsive strong cationic copolymer-brush-grafted silica beads and biomolecules

Thermoresponsive polymer brushes have attracted considerable research attention owing to their unique properties. Herein, we developed silica beads grafted with poly(N-isopropylacrylamide (NIPAAm)-co-3-acrylamidopropyl trimethylammonium chloride (APTAC)-co-tert-butyl acrylamide (tBAAm) and P(NIPAAm-co-APTAC-co-n-butyl methacrylate(nBMA)) brushes. The carbon, hydrogen, and nitrogen elemental analysis of the copolymer-grated silica beads revealed the presence of a large amount of the grafted copolymer on the silica beads. The electrostatic and hydrophobic interactions between biomolecules and prepared copolymer brushes were analyzed by observing their elution behaviors via high-performance liquid chromatography using the copolymer-brush-modified beads as the stationary phase. Adenosine nucleotides were retained in the bead-packed columns, which was attributed to the electrostatic interaction between the copolymers and adenosine nucleotides. Insulin was adsorbed on the copolymer brushes at high temperatures, which was attributed to its electrostatic and hydrophobic interactions with the copolymer. Similar adsorption behavior was observed in case of albumin. Further, at a low concentration of the phosphate buffer solution, albumin was adsorbed onto the copolymer brushes even at relatively low temperatures owing to its enhanced electrostatic interaction with the copolymer. These results indicated that the developed thermoresponsive strong cationic copolymer brushes can interact with peptides and proteins through a combination of electrostatic and temperature-modulated hydrophobic interactions. Thus, the developed copolymer brushes exhibits substantial potential for application in chromatographic matrices for the analysis and purification of peptides and proteins.

Surface-Grafted Biocompatible Polymer Conductors for Stable and Compliant Electrodes for Brain Interfaces.

Durable and conductive interfaces that enable chronic and high-resolution recording of neural activity are essential for understanding and treating neurodegenerative disorders. These chronic implants require long-term stability and small contact areas. Consequently, they are often coated with a blend of conductive polymers and are crosslinked to enhance durability despite the potentially deleterious effect of crosslinking on the mechanical and electrical properties. Here the grafting of the poly(3,4 ethylenedioxythiophene) scaffold, poly(styrenesulfonate)-b-poly(poly(ethylene glycol) methyl ether methacrylate block copolymer brush to gold, in a controlled and tunable manner, by surface-initiated atom-transfer radical polymerization (SI-ATRP) is described. This "block-brush" provides high volumetric capacitance (120 F cm─3), strong adhesion to the metal (4h ultrasonication), improved surface hydrophilicity, and stability against 10000 charge-discharge voltage sweeps on a multiarray neural electrode. In addition, the block-brush film showed 33% improved stability against current pulsing. This approach can open numerous avenues for exploring specialized polymer brushes for bioelectronics research and application.

A novel UV-curable amphiphobic coating with dynamic air-layer copolymer brush offering stable dual-functional anti-scaling and anti-corrosion properties

Scale deposition and metal corrosion, especially in the petroleum industry, have always been serious issues that seriously affect economic efficiency and safety. However, conventional anti-scaling strategies including mechanical descaling and chemical detergents are energy-consuming and environmentally damaging, which can't achieve efficient and long-term protection. Based on mechanical descaling and chemical detergents, and anti-corrosion strategies based on filler are inadequate to realize efficient protection. Herein, this work reports a novel UV-curable polymer coating with long-term anti-scaling and anti-corrosion properties. The excellent anti-scaling capability was achieved by inhibiting interfacial nucleation and reducing interfacial adhesion work of scaling products. Significantly, the anti-scaling capability of the designed coating mainly originates from two aspects: inhibiting interfacial nucleation and reducing interfacial adhesion work of scaling. Compared with pure polyurethane acrylic coating (0 % FGSS), the 20 % FGSS coating shows significantly improved scaling repellence even after a 240 h dynamic scaling test while maintaining a fairly low theoretical adhesion work (≈0.1 mN/m). This outstanding anti-corrosion capability of the FGSS coating mainly originates from two aspects: the physical barrier effect of the air layer and low surface energy resistance barriers with dynamic FGSS brushes. The physical barrier effect of the air layer and the low surface energy resistance barriers also lead to outstanding anti-corrosion property (with the |Z|0.01 Hz value maintained at 108 Ω·cm2). This study presents a simple and effective design and fabricated strategy, paving a new pathway for developing UV-cured coatings with unique anti-corrosion and anti-scaling properties. This facile and effective UV-curable polymer coating shows great potential in metal protection and paves a new pathway for the development of long-term functional protection coatings.

In Situ Preparation of Star-Shaped Protein-"Smart" Polymer Conjugates with pH and Thermo-Dual Responsibility for Bacterial Separation.

To achieve effective separation and enrichment of bacteria, a novel synthetic scheme was developed to synthesize star-style boronate-functionalized copolymers with excellent hydrophilicity and temperature and pH responsiveness. A hydrophilic copolymer brush was synthesized by combining surface-initiated atom-transfer radical polymerization with amide reaction using bovine serum albumin as the core. The copolymer brush was further modified by introducing and immobilizing fluorophenylboronic acids through an amide reaction, resulting in the formation of boronate affinity material BSA@poly(NIPAm-co-AGE)@DFFPBA. The morphology and organic content of BSA@poly(NIPAm-co-AGE)@DFFPBA were systematically characterized. The BSA-derived composites demonstrated a strong binding capacity to both Gram-positive and Gram-negative bacteria. The binding capabilities of the affinity composite to Staphylococcus aureus and Salmonella spp. were 195.8 × 1010 CFU/g and 79.2 × 1010 CFU/g, respectively, which indicates that the novel composite exhibits a high binding capability to bacteria and shows a particularly more significant binding capacity toward Gram-positive bacteria. The bacterial binding of BSA@poly(NIPAm-co-AGE)@DFFPBA can be effectively altered by adjusting the pH and temperature. This study demonstrated that the star-shaped affinity composite had the potential to serve as an affinity material for the rapid separation and enrichment of bacteria in complex samples.

Singlet oxygen production of Zn-Ag-In-S quantum dots for photodynamic treatment of cancer cells and bacteria.

Zn-Ag-In-S (ZAIS) quantum dots (QDs) were synthesized with various Ag-to-In ratios and used as novel photosensitizers for photodynamic therapy (PDT) on cancer cell inhibition and bacterial sterilization, and their structural, optical, and photodynamic properties were investigated. The alloyed QDs displayed a photoluminescence quantum yield of 72% with a long fluorescence lifetime of 5.3μs when the Ag-to-In ratio was 1:3, suggesting a good opportunity as a dual functional platform for fluorescence imaging and PDT. The ZAIS QDs were then coated with amphiphilic brush copolymer poly(maleic anhydride-alt-1-octadecene) (PMAO) before application. The 1O2 quantum yield of the ZAIS/PMAO was measured to be 8%, which was higher than previously reported CdSe QDs and comparable to some organic photosensitizers. Moreover, the ZAIS QDs showed excellent stability in aqueous and biological media, unlike organic photosensitizers that tend to degrade over time. The in vitro PDT against human melanoma cell line (A2058) and Staphylococcus aureus shows about 30% inhibition rate upon 20min light irradiation. Cell staining images clearly demonstrated that co-treatment with ZAIS QDs and light irradiation effectively killed A2058 cells, demonstrating the potential of ZAIS QDs as novel and versatile photosensitizers for PDT in cancer and bacterial treatment, and provides useful information for future designing of QD-based photosensitizers.

Performance of bioresorbable peptide incorporated polymers produced for fused deposition modelling (FDM)

The use of biomaterials in additive manufacturing (AM) of medical devices has gained significant attention over the years, especially in areas such as wound care and orthopedics. This study aims to investigate the performance of bioresorbable peptide-incorporated polymers produced for fused deposition modelling (FDM) process. Herein, we report FDM 3D Printing process of bioactive polymers comprising polycaprolactone (PCL), poly(lactic-co-glycolic acid) (PLGA) or polylactic acid (PLA) or blended with peptide–containing brush copolymers bearing similar synthetic polymer side chains. Mechanical, thermal and rheological properties of the materials were carried out and we report that the incorporation of bioactive polymers into these biodegradable polymers does not result in significant changes to glass transition temperature, melt temperature, tensile properties of the base polymers. However, it was observed that flexural and rheological properties altered significantly. This study provides an insight into the thermomechanical performance of bioresorbable peptide-incorporated polymers for FDM utilization which allows for their use potential in medical device fabrication.

Using Poly(N‐isopropylacrylamide) and Poly(ethyleneglycol) Grafted Polycarbodiimides as Unique Nanocarriers for Hydrophobic Form of the Doxorubicin (DOX)

AbstractAmphiphilic helical polycarbodiimides bearing side chains with terminal alkyne groups provide a unique platform for construction of polymeric micelles. Incorporation of propargyl pendants into polyguanidine backbone allowed post‐polymerization modification with azide terminated, random coil, poly(N‐isopropylacrylamide), PNIPAM15K and poly(ethyleneglycol), PEG2K moieties using copper‐catalyzed click reaction (CuAAC). Thus, four new amphiphilic brush copolymers with varying grafting density were synthesized and their self‐assembly behavior in aqueous medium was studied by combination of TEM, SEM, AFM, and optical microscopy techniques. It was shown the formation of micellar structures at critical micelle concentration (CMC) ranging from 1.58 × 10−5 to 1.05 × 10−3mg mL−1. A hydrophobic drug doxorubicin (DOX) was then encapsulated successfully into these micellar structures with encapsulation efficiency (EE) falling in the range from 16% to 27%. Further, the cellular uptake studies were carried out by using HeLa cells and the cytotoxic activity of DOX‐loaded micelles was determined to be less than 65% of cell viability at a concentration of 0.250 mg mL−1. Fluorescence microscopy imaging revealed importing the micelles into the cells by endocytosis and internalization of the DOX into nucleus of the HeLa cells.

A novel acid-responsive polymer coating with antibacterial and antifouling properties for the prevention of biofilm-associated infections

Chronic infections caused by the pathogenic biofilms on implantable medical devices pose an increasing challenge. To combat long-term biofilm-associated infections, we developed a novel dual-functional polymer coating with antibacterial and antifouling properties. The coating consists of N-vinylpyrrolidone (NVP) and 3-(acrylamido)phenylboronic acid (APBA) copolymer brushes, which bind to curcumin (Cur) as antibacterial molecules through acid-responsive boronate ester bonds. In this surface design, the hydrophilic poly (N-vinylpyrrolidone) (PVP) component improved antifouling performance and effectively prevented bacterial adhesion and aggregation during the initial phases. The poly (3-(acrylamido) phenylboronic acid) (PAPBA, abbreviated PB) component provided binding sites for Cur by forming acid-responsive boronate ester bonds. When fewer bacteria overcame the anti-adhesion barrier and colonized, the surface responded to the decreased microenvironmental pH by breaking the boronate ester bonds and releasing curcumin. This responsive mechanism enabled Cur to interfere with biofilm formation and provide a multilayer anti-biofilm protection system. The coating showed excellent antibacterial properties against Escherichia coli and Staphylococcus aureus, preventing biofilm formation for up to 7 days. The coating also inhibited protein adsorption and platelet adhesion significantly. This coating also exhibited high biocompatibility with animal erythrocytes and pre-osteoblasts. This research offers a promising approach for developing novel smart anti-biofilm coating materials.

Thermoresponsive block-copolymer brush-modified interfaces for effective fabrication of hepatocyte sheets

Hepatic tissue engineering has been investigated for the treatment of liver disease. One promising tissue is the hepatocyte sheet, cultured in temperature-responsive cell culture dishes. However, the preparation of hepatocyte sheets requires precoating of the dish with fetal bovine serum (FBS), which is not desirable for clinical applications. To overcome this issue, we developed a thermoresponsive polymer-modified glass with an affinity for hepatocytes. Poly(N-p-vinylbenzyl-O-β-d-galactopyranosyl-(1→4)-d-guliconamide)-b-poly(N-isopropylacrylamide) (PVLA-b-PNIPAAm) was prepared through two steps of atom transfer radical polymerization (ATRP). The prepared copolymer brushes were characterized using X-ray photoelectron spectroscopy, atomic force microscopy, gel permeation chromatography, contact angle measurements, and fluorescence labeled-fibronectin and -lectin adsorption assays. These characterizations showed that the smooth block copolymer layer was successfully modified by ATRP. The feasibility of using the prepared polymer brush-grafted glass as a hepatocyte sheet fabrication dish was investigated using primary rat hepatocytes. The PVLA-b-PNIPAAm brushes exhibited hepatocyte adhesion and proliferation without FBS precoating. By reducing the temperature from 37 °C to 20 °C, the hepatocyte sheet was recovered from the copolymer brush. These results indicated that the prepared PVLA-b-PNIPAAm brushes can be utilized for effective hepatocyte sheet fabrication without the need for FBS precoating.

Electrical Chain Rearrangement: What Happens When Polymers in Brushes Have a Charge Gradient?

Under the influence of electric fields, the chains in polyelectrolyte brushes can stretch and collapse, which changes the structure of the brush. Copolymer brushes with charged and uncharged monomers display a similar behavior. For pure polyelectrolyte and random copolymer brushes, the field-induced structure changes only the density of the brush and not its local composition, while the latter could be affected if charges are distributed inhomogeneously along the polymer backbone. Therefore, we systematically study the switching behavior of gradient polyelectrolyte brushes in electric fields for different solvent qualities, grafting densities, and charges per chain via coarse-grained molecular dynamics simulations. Similar to random copolymers and pure polyelectrolytes, these brushes show a mixed-phase transition: intermediate states between fully stretched and collapsed are characterized by a bimodal chain-end distribution. Additionally, we find that the total charge of the brush plays a key role in the critical field required for a complete transition. Finally, we find that gradient polyelectrolyte brushes are charge-enriched at the brush-solvent interface under stretched conditions and charge-depleted under collapsed conditions, allowing for control over the local composition and thus the surface charge of the brush due to the inhomogeneous charge along the grafted chains.

Self-brushing for nanopatterning: achieving perpendicular domain orientation in block copolymer thin films.

The self-assembly of thin films of block copolymers (BCPs) with perpendicular domain orientation offers a promising approach for nanopatterning on a variety of substrates, which is required by advanced applications such as ultrasmall transistors in integrated circuits, nanopatterned materials for tissue engineering, and electrocatalysts for fuel cell applications. In this study, we created BCPs with an A-b-(B-r-C) architecture that have blocks with equal surface energy (γair) and that can bind to the substrate, effectively creating a non-preferential substrate coating via self-brushing that enables the formation of through-film perpendicular domains in thin films of BCPs. We employed a thiol-epoxy click reaction to functionalize polystyrene-block-poly(glycidyl methacrylate) with a pair of thiols to generate an A-b-(B-r-C) BCP and tune γair of the B-r-C block. The secondary hydroxyl and thiol ether functionality generated by the click reaction was utilized to bind the BCP to the substrates. Scanning electron microscopy revealed that perpendicular orientation was achieved by simply annealing a thin film of the BCP on the bare substrate without the usual extra step of coating a random copolymer brush on the substrate. The self-brushing capability of the BCP was also examined on gold, platinum, titanium, aluminum nitride, and silicon nitride surfaces. These results demonstrate that self-brushing is a promising approach for achieving perpendicular domain orientation in thin films of BCP for nanopatterning on a variety of useful surfaces.

Pinching dynamics and extensional rheology of dense colloidal suspensions with depletion attractions

We study the extensional flow properties by characterizing the capillarity-driven pinching dynamics of dense colloidal suspensions at a constant volume fraction ϕ=0.40 with polymer-induced depletion interactions using a dripping-onto-substrate (DoS) protocol. Methacrylate copolymer particles with dimethylacrylamide copolymer brushes are suspended in a refractive-index- and density-matched mixture of 80 (w/w)% glycerol in water with NaCl added to screen the electrostatic repulsions. Depletion attractions between the colloids are introduced by adding polyacrylamide polymers of weight and dispersity. The addition of polymer delays and modifies the pinch-off dynamics of the dense suspensions, depending on the size and dispersity of the polymer. The extensional relaxation time λE of suspensions collapses as a function of the normalized free volume polymer concentration c/c∗ with the corresponding polymer solutions, indicating that the elastic properties of the polymer solutions control the extensional time scale. Following the results of our previous study [Soetrisno et al., Macromolecules 56, 4919–4928 (2023)], the polymer size determines the scaling exponent of λE for colloid-polymer mixtures in the dilute regime and high dispersity shifts the concentration where the scaling of λE transitions from power-law to linear. The filament lifespans tf of colloid-polymer mixtures and of polymer solutions collapse onto a master curve as a function of c/c∗ when normalized by the filament lifespan of the corresponding fluid without polymer tf,0. These results provide insight into the role of the polymer size in dictating the pinching dynamics and extensional rheology of colloid-polymer mixtures and further suggest that the shear and extensional responses of these mixtures can be separately tuned through the concentrations of the two constituents.

Anisotropy in Antimicrobial Bottle Brush Copolymers and Its Influence on Biological Activity

AbstractAntimicrobial polymers are a promising alternative to conventional antibiotics in the fight against antimicrobial resistance. Cationic bottle brush copolymers have shown to be superior to linear topologies in previous studies. Herein, the aspect ratio of such polymers is varied creating differently shaped confined unimolecular structures with varying degrees of side chain mobility. Using reversible addition‐fragmentation chain‐transfer (RAFT) polymerization, bottle brushes are produced in a one‐pot procedure. The morphology is confirmed by atomic force microscopy. The hydrophobicity, as determined via high performance‐liquid chromatography (HPLC) analysis, is drastically influenced by the topology. Using Fourier‐transform infrared (FTIR) spectroscopy, it is found that polymers with a high side chain mobility and increased global hydrophilicity, are less hydrated, and have stronger intramolecular hydrogen bonds. A phase segregated morphology leading to unimolecular micellization is assumed. Biological tests reveal increased antimicrobial activity for such segregated polymers. Their excellent hemocompatibility results in highly selective antimicrobial polymers whose adaptability seems to be a key feature in their excellent performance. This study highlights the tremendous importance of structural control in antimicrobial polymers.

Synthetic Evolution of a Supramolecular Harpooning Mechanism to Immobilize Vesicles at Antifouling Interfaces

AbstractThe immobilization of vesicles has been conceptualized as a method to functionalize biointerfaces. However, the preservation of their integrity post immobilization remains a considerable challenge. Interfacial interactions can cause vesicle rupture upon close surface contact and non‐specific protein adsorption impairing surface functions. To date, immobilization of vesicles has relied solely on either entrapment or prior modification of vesicles, both of which require laborious preparation and limit their applications. This work develops a bioinspired strategy to pin vesicles without prior modification while preserving their intact shape. This work introduces antifouling diblock copolymers and ultrathin surface‐attached hydrogels containing a brush‐like interface consisting of a bottle brush copolymer of N‐(2‐hydroxypropyl) methacrylamide (HPMA) and N‐(3‐methacrylamidopropyl)‐N,N‐dimethyldodecan‐1‐aminiumiodide (C12+). The presence of positive charges generates an attractive force that pulls vesicles toward the surface. At the surface, the amphiphilic properties of the combs facilitate their insertion into the membrane, mimicking the harpooning mechanism observed in antimicrobial peptides. Importantly, the antifouling poly(HPMA) backdrop serves to safeguard the vesicles by preventing deformation and breakage. Using a combination of thermodynamic analysis, surface plasmon resonance, and confocal laser scanning microscopy, this work demonstrates the efficiency of this biomimetic system to capture vesicles while maintaining an antifouling interface necessary for bioapplications.