Coordination Polymers Research Articles

Electrocatalytic Applications in Hydrogen Evolution of Two Nitrogen Heterocyclic Cu(I) Coordination Polymer Modified Electrodes

ABSTRACTThe development of low‐cost, high‐efficiency, stable, and structurally adjustable electrocatalysts for hydrogen evolution reaction (HER) is of great significance for energy conversion. In this study, two new Cu(I) coordination polymers (CPs), formulated as {[Cu(L1)](PF6)·CH2Cl2}n (1) and {[Cu2(L2)1.5(PPh3)](PF6)2}n (2) (L1 = 1,3‐bis[1‐(pyridin‐3‐ylmethyl) ‐1H‐benzimidazol‐2‐yl]propane, L2 = 1,4‐bis[1‐(3‐pyridylmethyl)‐1H‐benzimidazol‐2‐yl]butane), were synthesized by interfacial diffusion method and characterized by single‐crystal x‐ray diffraction and IR and UV–Vis spectra. Structural analysis shows that the CP‐1 is a one‐dimensional chain structure, whereas the CP‐2 is a two‐dimensional layered structure, which is due to the different coordination modes of ligands L1 (bridging chelation) and L2 (bridging). The electrocatalytic activity for HER of Cu(I) CPs was studied by preparing modified glassy carbon electrodes (CP‐1/GCE and CP‐2/GCE). Electrochemical HER studies manifest that in 0.5 M H2SO4, the overpotential (η10298K) and Tafel slope (b 298K) are −769 mV and 173 mV dec−1 for CP‐1/GCE, −933 mV and 301 mV dec−1 for CP‐2/GCE, and −930 mV and 298 mV dec−1 for bare/GCE, respectively. The η10298K and b298K of CP‐1/GCE were significantly positive shifted and decreased compared with the bare/GCE, indicating that CP‐1/GCE has significant electrocatalytic activity and electrocatalytic HER activity order is CP‐1/GCE > CP‐2/GCE ≈ bare/GCE. This work provides an important reference for the application of non‐noble metal CPs in the field of electrocatalysis.

A Series of Rare-Earth Metal-Based Coordination Polymers: Fluorescence and Sensing Studies

Ratiometric fluorescent sensing based on dual-emitting fluorescent coordination polymers (FL-CPs) has attracted intense attention due to their sensing accuracy and easy visualization when compared with sensing relying solely on monochromatic FL-CPs. In this work, a series of rare-earth metal-based CPs, formuled as [(CH3)2NH2][Ln(bpdc)2] (Ln3+ = Y3+, Eu3+ and Tb3+, H2bpdc = biphenyl-4,4′-dicarboxylic acid), are presented, which show dual emission aroused from the Ln3+ ions and the inefficient intermolecular energy transfer from ligands to Ln3+ metals. For clarity, the as-made Ln-CPs are named Eu-bpdc, Tb-bpdc, and Y-bpdc based on the corresponding Ln3+. Notably, Eu-bpdc, presented as an example, could be used as FL sensing material ratiometric to Fe3+ ions. The ratio of FL intensity of Eu3+ ions to bpdc2− ligands (I415/I615) showed a good linear relationship with the concentrations of Fe3+ ions. Moreover, the detection process could be visibly monitored through a change from purple to blue when Eu-bpdc was used as an FL proble. This work provides a good example for exploring visibly ratiometric sensors based on FL-CPs.

Dilute Pd−Ni Alloy through Low‐temperature Pyrolysis for Enhanced Electrocatalytic Hydrogen Oxidation

AbstractDesigning highly active and cost‐effective electrocatalysts for the alkaline hydrogen oxidation reaction (HOR) is critical for advancing anion‐exchange membrane fuel cells (AEMFCs). While dilute metal alloys have demonstrated substantial potential in enhancing alkaline HOR performance, there has been limited exploration in terms of rational design, controllable synthesis, and mechanism study. Herein, we developed a series of dilute Pd−Ni alloys, denoted as x% Pd−Ni, based on a trace‐Pd decorated Ni‐based coordination polymer through a facile low‐temperature pyrolysis approach. The x% Pd−Ni alloys exhibit efficient electrocatalytic activity for HOR in alkaline media. Notably, the optimal 0.5 % Pd−Ni catalyst demonstrates high intrinsic activity with an exchange current density of 0.055 mA cm−2, surpassing that of many other alkaline HOR catalysts. The mechanism study reveals that the strong synergy between Pd single atoms (SAs)/Pd dimer and Ni substrate can modulate the binding strength of proton (H)/hydroxyl (OH), thereby significantly reducing the activation energy barrier of a decisive reaction step. This work offers new insights into designing advanced dilute metal or single‐atom‐alloys (SAAs) for alkaline HOR and potentially other energy conversion processes.

Isostructural Coordination Polymers of Zn(II) or Co(II) from Assembling of Cationic and Anionic Parts and Their Utilities

Isostructural Coordination Polymers of Zn(II) or Co(II) from Assembling of Cationic and Anionic Parts and Their Utilities

Hollow Superhelices Based on Chiral Europium Coordination Polymers.

The construction of helical nanotubes based on chiral coordination polymers (CPs) is an intriguing but challenging task, which is important for the development of functional materials that combine macroscopic chirality with tube-related properties. Here, we selected a chiral europium phosphonate system, e.g., Eu(NO3)3/R-,S-pempH2, and carried out a systematic work. By controlling the hydrothermal reaction conditions such as the pH value of the reaction mixture, the molar ratio and concentration of the reactants, we obtained block-like crystals of R/S-1b, rod-like crystals ofR/S-3r, hollow superhelices of R/S-2hh, and solid superhelices of R/S-4sh. In the latter two cases, the chirality has been successfully transferred and amplificated from the molecular level to the macroscopic level. Interestingly, compounds R/S-2hh and R/S-4sh have the same chemical composition of Eu(R/S-pempH)3×2H2O and show identical PXRD patterns, thus can be considered as the same material except for different morphologies. We further investigatedtheir circularly polarized luminescence (CPL) properties and found that the hollow superhelix of R/S-2hh had a larger dissymmetry factor than the solid superhelix of R/S-4sh. This study not only provides the first example of hollow superhelices of chiral CPs, but also offers the possibility of modulating the chiroptical properties of CPs through morphological control.

Decrypting Synergy of Alloy & Metal Nanoparticles Within Nitrogen-Doped Carbon Nanosheets for Zn-Air Batteries with Ultralong Cycling Stability.

The exploration of efficient, robust, and low-cost bifunctional electrocatalysts to drive the commercial application of Zn-air batteries (ZABs) is of great significance but still remains a challenge. Herein, a 1D coordination polymer (1D-CP) derived FeNi alloy & Co nanoparticles (NPs) co-implanted N-doped carbon nanosheets (FNC/NCS) is judiciously crafted and employed as a high-performance electrocatalyst for ultralong lifetime ZABs. The key to this strategy is the leveraging of metal-coordinated melamine to direct the pyrolysis of 1D-CP, enabling the in situ formation of well-dispersed FeNi alloy and Co NPs within the carbon matrix. The resulting FNC/NCS exhibits prominent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activity with a small overall oxygen potential difference (ΔE = 0.68V). Density functional theory (DFT) simulation demonstrates that the synergistic effect between FeNi alloy and Co NPs can reduce energy barriers, promote electron transfer, and optimize the formation of crucial intermediates, thereby largely boost ORR/OER activity of FNC/NCS. The FNC/NCS-assembled ZABs possess high specific capacity, large power density, and ultralong cycling life in both aqueous (> 3300h) and solid-state (150h) electrolytes. This work provides a viable strategy for 1D-CP-derived bifunctional electrocatalysts and dissects the synergistic effect between different metal species, affording significant guidance for the development of renewable energy materials.

Cd(II)-based fish-bone-like 1D coordination polymer: structural elucidation and computational study

{[Cd(L)2(PBT)2]}n (1) [H2L = 5-nitro-isophthalic acid; PBT = 2-pyridin-4-ylbenzothiazole], 1D Coordination Polymer (1D-CP), is characterized by single crystal X-ray diffraction. The structure of 1 contains carboxylate bridges of L2- to Cd(II), where one carboxylate chelates to Cd(II) and the other -COO bridges to two neighboring Cd(II) centers that then form eight-membered dinuclear metallacycles (Cd2C2O4). The 1D chains self-assemble via H-bonding and π⋅⋅⋅π interactions to form a supramolecular aggregate that resembles a fish-bone pattern. These interactions are further explored by Hirshfeld Surface Analysis. Density Functional Theory (DFT) computations using the crystallographic parameters of 1 predicted an energy gap, ΔE (EHOMO – ELUMO) of 3.67 eV, which is comparable to the experimental band gap obtained from a Tauc’s plot, 3.73 eV. The band gap value demonstrates the semiconducting character and may be used for device fabrication. Furthermore, molecular electrostatic potential (MEP) shows strong electrophilic reaction potential and predicts reactive sites. The PBT ligand is emissive (370 nm) while H2L is non-emissive. DMF suspensions of 1 emit at 525 nm with a long lifetime, 0.715 ns compared to the lifetime of PBT (0.05 ns). This supports that extended conjugation occurs upon formation of the 1D-CP, altering the photophysics.

Fabrication of a novel mixed-valent copper-based coordination polymer as a fluorescent sensor for selective and efficient detection of multiple analytes

A novel three-dimensional fluorescent mixed-valent copper-based coordination polymer (CP), namely {[CuICuII4(triazol)6(bpta)2]Cl}n (Cu-CP), was synthesized hydrothermally in the presence of Cu(II) ion, 2,4,6-tri(1H-1,2,4-triazol-1-yl)-1,3,5-triazine (TTT), and 2,2′,4,4′-biphenyltetracarboxylic acid (H4bpta). The structure of the Cu-CP was studied using single-crystal X-ray diffraction (SCXRD) and powder X-ray diffraction (PXRD). Interestingly, the crystallographic data revealed that a part of Cu(II) ions were reduced in situ to Cu(I) ions as well as the nitrogen-containing ligand TTT was converted to triazol, which possessed excellent fluorescence characteristics as a transition metal ion with a d10 electronic configuration, prompting further investigation into the fluorescence sensing properties of Cu-CP. The results confirmed that Cu-CP exhibited excellent fluorescence performance which an outstanding candidate as a fluorescence sensor for Fe3+, Cr2O72−, CrO42−, MnO4− and nitrobenzene (NB), with a low limit of detection. For ethylene glycol (EG) detection, Cu-CP showed high-efficiency fluorescence enhancement across a range of temperatures. The underlying mechanism of fluorescence enhancement was investigated through comprehensive experimental studies.

Highly interweaved carbonaceous interlayer synchronously decorated by foreign atoms and metals for adsorbing and catalyzing polysulfides in lithium-sulfur batteries

A highly interweaved carbonized bacterial cellulose (CBC) decorated by heteroatoms and metallic nanoparticles was fabricated through initial coating of a metallic coordination polymer onto BC nanofibers followed by carbonization. The carbonaceous CBC networks not only efficiently transfer electrons but also entrap the soluble polysulfides by physical interception. Moreover, the polar ingredients of foreign atoms and metals on CBC networks enable a favorable chemisorption toward polysulfides, and meanwhile the embedded metallic nanoparticles promote the conversion kinetics via electrocatalysis. Theoretical simulation and experimental investigation co-confirm that the decorated Ni species greatly enhance the adsorption capability towards polysulfides, as well as reduce the energy barrier of the rate-determining step via electrocatalysis. As a consequence, the lithium-sulfur batteries equipped with the optimal Ni-NCBC interlayer exhibited relatively high specific capacity (1245 mAh g−1 at 0.2 A g−1), superior rate capability (820 mAh g−1 at 4.0 A g−1), and stable cycling performance (73.2 % capacity retention after 1000 cycles). This work proposes a facile strategy to synchronously incorporate heteroatoms and metallic decorations into highly conductive nanofibrous networks for alleviating the shuttling effects of polysulfides effectively.

Boosting alkyne semi-hydrogenation selectivity via metal-organic interface modulated self-supporting palladium-based catalysts

The semi-hydrogenation of alkynes is crucial in the chemical industry, yet developing catalysts with both high activity and selectivity remains challenging. In this work, we introduced a self-supported method to fabricate a palladium-based nanocatalyst by in-situ reduction of Pd(II) on copper-based coordination polymers (Cu(I)-PNS) without external reducing agents. The resulting Pd/Cu(I)-PNS catalyst demonstrated exceptional efficiency and 94.8 % selectivity for styrene in the semi-hydrogenation of phenylacetylene, with no over-hydrogenation. Our findings highlight that the metal–organic interface enhances the catalyst’s selectivity by weakening styrene adsorption due to electronic modification. Additionally, the catalyst exhibited superior stability and activity, showing potential for various alkynes. This approach offers a direct and efficient strategy for creating highly selective palladium-based nanocatalysts for industrial applications.

Highly Conductive Two-Dimensional FeTHBQ/Graphene Nanocomposite as the Cathode Material for Lithium-Ion Batteries.

Constructing high-performance coordination polymer (CP) cathodes for lithium-ion batteries based on the redox reactions of both high-potential transition metal ions and high-capacity organic ligands has attracted extensive attention. However, CP cathodes suffer from structural degradation, low electrical conductivity, and sluggish diffusion kinetics, resulting in poor cycling stability and inferior rate capability. Herein, the ultrafine FeTHBQ (THBQ = tetrahydroxy-1,4-benzoquinone) CP nanoparticles in situ grew on both sides of graphene nanosheets to form the uniform two-dimensional (2D) FeTHBQ/Graphene nanocomposite with a sandwich structure via a one-pot solvothermal method. The highly conductive graphene skeleton promotes the electronic conduction and structural stability for the 2D FeTHBQ/Graphene nanocomposite. Besides, compared with bulk FeTHBQ, the primary FeTHBQ nanoparticles in the FeTHBQ/Graphene nanocomposite have smaller particle sizes with larger specific surface areas. This not only shortens the Li+ diffusion distance in the FeTHBQ crystal but also benefits Li+ transfer between the electrolyte and the electrode. In the FeTHBQ/Graphene nanocomposite, the active material of FeTHBQ manifested multiple redox centers of transition metal ions (Fe3+/Fe2+) and carbonyls (C═O/C-O-) in THBQ ligands. Owing to the enhancements of structural stability, electronic conduction, and Li+ diffusion kinetics, the 2D FeTHBQ/Graphene nanocomposite presented a high lithium-ion storage capacity of 217.2 mA h g-1 at 50 mA g-1, a fast rate capability of 79.1 mA h g-1 at 5000 mA g-1, and a stable cycling performance of 87.2 mA h g-1 at 500 mA g-1 after 100 cycles. This work sheds light on the great opportunity for optimizing the electrochemical performances of CP-based functional electrode materials by combining with conductive substrates.

Synthesis, structure, and AP catalytic performance of two new 1D coordination polymers

Two 1D chain coordination polymers (CPs), [Co(DNDPA)(DMF)2] 1 and [Mn(DNDPA)(DMF)2] 2, were successfully synthesized (4,4′-dinitrodiphenic acid, DNDPA). Their structures were confirmed by single-crystal X-ray diffraction. Differential scanning calorimetry coupled with thermogravimetric analysis revealed that both CPs exhibit commendable thermal stability, with CP 1 and 2 decomposing at 368.9 °C and 375.5 °C, respectively. Non-isothermal kinetic studies confirmed that both CPs displayed significant catalytic activity for the decomposition of ammonium perchlorate (AP). In particular, CP 1 and 2 reduced the activation energy of AP from its intrinsic value to 100.5 kJ/mol and 127.45 kJ/mol, respectively, and its high-temperature decomposition peak to 354.3 °C and 327.7 °C, respectively. These findings underscore the potential of these CPs as effective catalysts for enhancing the combustion properties of AP.

Superparamagnetic iron oxide nanoparticles functionalized with on-demand redox-responsive contractible coordination polymer brush as molecular actuator driven by π-dimerization

Nanomachines require molecular actuators to be coupled to a condensed phase. In this work, a redox responsive 1D contractible coordination polymer (ZnL) used as non-interlocked actuator is grafted onto superparamagnetic iron oxide nanoparticles (SPIONs) in a brush-like configuration. Oxidized rod-like ZnL oligomers have ability to reversibly self-fold upon reduction via π-dimerization of their bis-viologen units. Unlike in usual responsive brushes, ZnL chains behave individually, generating spatially controlled mechanical motion at nanoparticle surface associated to significant variations of particle diameters. ZnL oligomers were “grafted to” SPIONs in a single step. Reduction of colloidal dispersions was perform by visible light illumination with the help of a photoreductant. π-dimerization was assessed by UV–vis–NIR and reversible contraction of ZnL brush was characterized by DLS. Effects of ZnL chains length and grafting density on mechanism and performance of contractibility were studied. ZnL brush can alternately be contracted and extended with excellent reversibility. Combined UV–vis–NIR, DLS and TGA analyses demonstrate that π-dimerization is only intramolecular and that chains behave as independent actuators. Maximal contraction of 22 nm is obtained for largest particles (DH = 86 nm). Full to partial contraction of the brush depends on grafting density with a threshold at ≈ 47 chains per particle.

Application of Fluorescent Composite Materials as a Sustained Release System in Treatment of Polycystic Ovary Syndrome.

Polycystic ovary syndrome (PCOS) is a multifactorial disease characterized by oxidative stress and follicular dysfunction, leading to menstrual irregularities, hyperandrogenism, and infertility. Traditional drug delivery methods often result in drug loss and side effects on normal tissues. To address these issues, we synthesized two novel Co(II)-containing coordination polymers (CPs), {[Co(L)(H2O)2]·2H2O}n (1) and {[Co(L)(H2O)2]·1.5H2O}n (2), through the reaction of the T-shaped ligand (4 - 3'-pyridyl-,6 - 4'-carboxylphenyl)picolinic acid (H2L) with Co(NO3)2·6H2O via a solvothermal process. Fluorescence spectroscopy revealed that the fluorescence emission of the CPs originates from the ligand, indicating their potential application as blue fluorescence materials. Subsequently, we encapsulated these CPs with hyaluronic acid (HA) and carboxymethyl chitosan (CMCS) hydrogels to create two types of metal gel particles carrying spironolactone (HA/CMCS-CPs@spironolactone). SEM and TEM analyses showed that the material consists of tightly stacked sheet-like structures with an average size of approximately 100nm. Thermogravimetric analysis (TGA) indicated that the material begins to decompose at around 115°C, demonstrating good thermal stability. We assessed the inhibitory effects of these materials on oxidative stress induced by PCOS. The results showed that both types of spironolactone-loaded metal gel particles significantly reduced malondialdehyde (MDA) levels, particularly the particles constructed with CP2. HA/CMCS-CP1@spironolactone reduced MDA levels by approximately 17% and 46% at low and high concentrations, respectively, while HA/CMCS-CP2@spironolactone decreased MDA levels by about 55% and 39% at high and low concentrations, respectively. Therefore, the novel drug delivery system reported in this study has the potential to become a safe and effective option for the localized treatment of PCOS.

Crystallization of 2D TiO2 Nanosheets via Oriented Attachment of 1D Coordination Polymer.

Demystifying the molecular mechanism of growth is vital for the rational design, synthesis, and optimization of functional nanomaterials. Despite the promising perspectives and extensive efforts, the growth mechanism of atomically thin TiO2(B) nanosheets remains unclear, hence it is difficult to tune their band and surface structures. Herein, we report an oriented attachment-based crystallization mechanism of TiO2(B) nanosheets from a 1D titanium glycolate coordination polymer through hydrolysis and condensation. With time-tracking experiments, this 1D coordination polymer is found to be an intermediate in the synthesis of TiO2(B) nanosheets by using Ti alkoxides and chlorides as precursors, suggesting the universality of the 1D-to-2D growth mechanism. Such a side-to-side attachment pathway bridges the classical and nonclassical interpretations of crystallization, and meanwhile hints at the possibility of other 1D complexes as potential precursors for 2D materials.

Synthesis, crystal structure, Hirshfeld surface analysis, DFT computations and protein binding efficiency of a 1-D Ni(II) chain derived from a tridentate Schiff base ligand

A new Ni(II)-azido 1-D coordination polymer, [Ni2L2(μ1,1-N3)(μ1,3-N3)]n, was obtained through reaction of 1-[(3-dimethylamino-propylimino)-methyl]-naphthalen-2-ol (HL) and the perchlorate salt of nickel(II) in the presence of pseudohalide azide. X-ray crystallography and spectroscopic experiments (IR and UV-Vis) were used to describe this coordination polymer (CP). Single crystal X-ray studies revealed that the CP is a one-dimensional chain of Ni(II) in which the neighboring dimeric units (triply bridged by di-μ2-phenoxidoand µ1,1-N3) are further connected by μ1,3-azido bridges in a zig-zag fashion. The cooperative participation of N···H hydrogen bonding, π···π stacking and C-H···π interactions occur during crystal packing. A 2-D supramolecular architecture with star-shaped voids results from additional C–H···π stacking interactions. Hirshfeld surface analysis was used to look at the intermolecular interactions. DFT studies were carried out to calculate the HOMO-LUMO band gap of the ligand as well as the coordination polymer. Interaction of the CP with bovine serum albumin (BSA) protein was investigated spectroscopically by absorption and fluorescence titration methods. The result showed that the CP could quench the intrinsic fluorescence of BSA. Fluorescence resonance energy transfer (FRET) studies revealed that energy transfer takes place from BSA to the CP. Cyclic voltammetry of the CP indicated an irreversible cathodic redox couple assigned to Ni(II)/Ni(I).

Mesoporous, high surface area and microrod-shaped cobalt (II) coordination polymer for assessment of molecular structure, thermolysis and non-isothermal kinetics parameters

This study is significant as it presents the assessment of molecular identification, thermal degradation, and non-isothermal kinetics of a cobalt (II) coordination polymer [Co (II) CPs] synthesized from suberoyl bis (2-ethoxybenzamide) (sbebz) and cobalt acetate through the condensation process. The condensation product sbebz was obtained from suberoyl chloride and 2-ethoxybenzamide. The XRD, FT-IR, Raman, and XPS investigated as aspects to identify its structure, purity, and chemical state. The morphological facet was confirmed by SEM and TEM. The morphology data revealed a microrod-shaped morphology of Co (II) CPs with an average particle size 0.7 µm to 1 µm. The pore size, and surface properties were examined by Brunauer-Emmett-Teller (BET) and atomic force microscopy (AFM), revealing a highly large surface area (1076 m2/g), mesoporous and monodisperse nature. The molecular interaction of ligand was estimated using protein molecule. The thermal-decomposition behavior and non-isothermal kinetics of Co (II) CPs were estimated at different heating rates (5 °C/min, 10 °C/min, 15 °C/min, and 20 °C/min) under nitrogen atmosphere by thermogravimetry/Derivative thermogravimetry (TG/DTG). As-synthesized Co (II) CPs show enhanced thermal stability compared to the ligand (sbebz). The multiple heating TG/DTG curve exhibits a more or less identical degradation profile/pattern. The kinetic parameters like order of reaction (n), pre-exponential Arrhenius factor (A), activation entropy (∆s), activation energy (Ea), activation free-energy (∆G), and activation enthalpy (∆H) were calculated using Coats-Redfern (CR) method.

Hollow Calcium/Copper Bimetallic Amplifier for Cuproptosis/Paraptosis/Apoptosis Cancer Therapy via Cascade Reinforcement of Endoplasmic Reticulum Stress and Mitochondrial Dysfunction.

The endoplasmic reticulum (ER) and mitochondria are essential organelles that play crucial roles in maintaining cellular homeostasis. The simultaneous induction of ER stress and mitochondrial dysfunction represents a promising yet challenging strategy for cancer treatment. Herein, a hollow calcium-copper bimetallic nanoplatform is developed as a cascade amplifier to reinforce ER stress and mitochondrial dysfunction for breast cancer treatment. For this purpose, we report a facile method for preparing hollow CaCO3 (HCC) nanoparticles by regulating the dissolution-recrystallization process of amorphous CaCO3, and the amplifier D@HCC-CuTH is meticulously fabricated by sequentially coating disulfiram-loaded HCC nanoparticles with a copper coordination polymer and hyaluronan. In tumor cells, the dithiocarbamate-copper complex generated in situ by liberated disulfiram and Cu2+ inhibits the ubiquitin-proteasome system, causing irreversible ER stress and intracellular Ca2+ redistribution. Meanwhile, the amplifier induces mitochondrial dysfunction via triggering a self-amplifying loop of mitochondrial Ca2+ burst, and reactive oxygen species augment. Additionally, Cu2+ induces dihydrolipoamide S-acetyltransferase oligomerization in mitochondria, further exacerbating mitochondrial damage via cuproptosis. Collectively, ER stress amplification and mitochondrial dysfunction synergistically induce a cuproptosis-paraptosis-apoptosis trimodal cell death pathway, which demonstrates significant efficacy in suppressing tumor growth. This study presents a paradigm for synchronously inducing subcellular organelle disorders to boost cancer multimodal therapy.

High Quantum Yields and Energy Transfer Efficiency of Lanthanide‐Based Coordination Polymers as Luminescent Thermometer in Low Temperature Range

ABSTRACTLuminescent lanthanide‐based coordination polymers (LnCPs) present great potential in low‐temperature detection due to their convenience in contactless readout. High quantum yields and energy transfer efficiency are favored by LnCPs as luminescent thermometer. In this work, based on the thermogravimetric analysis and temperature‐dependent powder x‐ray diffraction, coordinated and isolated molecules of [Ln2(mip)3(H2O)8·4H2O]∞ (abbreviated as Ln2MIP) were removed by dehydration process. Combining luminescent measurement and calculation, both quantum yields and energy transfer efficiency between Tb3+ and Eu3+ have been greatly enhanced. Additionally, the Eu3+ intensity of dehydrated Gd0.2Tb1.08Eu0.72MIP displays excellent temperature sensing ability from 77 to 300 K with enhanced relative sensitivity. These results demonstrate the potential of LnCPs in low‐temperature sensing with high quantum yields and energy transfer efficiency.

Solid‐State NMR of Heterogeneous Catalysts

AbstractRecent advances in solid‐state nuclear magnetic resonance (NMR) spectroscopy, combined with dynamic nuclear polarization (DNP), quantum chemical DFT calculations, and gas‐phase NMR spectroscopy investigating the structure and reactivity of heterogeneous catalysts are reviewed. The investigated catalysts range from classical mononuclear catalysts, like immobilized derivates of Wilkinson's catalysts over binuclear catalysts such as the dirhodium paddlewheel catalyst to catalytic nanoparticles, employing various support materials, such as mesoporous silica gels, coordination polymers, and biomaterials such as cellulose.