Converter For Renewable Energy Applications Research Articles

A High Step-Up Hybrid Y-Source-Quasi-Z Source DC–DC Converter for Renewable Energy Applications

A High Step-Up Hybrid Y-Source-Quasi-Z Source DC–DC Converter for Renewable Energy Applications

A new fault-tolerant converter for renewable energy applications with improved reliability

With power converters consisting of several components, the reliability of a power converter becomes a major concern. With a switched-capacitor (SC) integrated into multilevel inverter (MLI) topologies, the chances of faults is more due to a much larger number of components than the MLI topologies with multiple isolated dc voltage sources. In this article, several SC-based 5L-MLI topologies have been analyzed for their performance with open-circuit fault (OCF), and based on the analysis, three 5L fault-tolerant MLI topologies have been proposed. The analysis for the proposed topologies have been carried out in terms of power loss analysis using PLECS software and power quality analysis using MATLAB software for different fault case scenarios. Further, the proposed 5L topologies have been compared with a similar state-of-the-art. A hardware prototype has been developed, and results have been discussed for various operating conditions.

Design and Analysis of Modified Series–Parallel Quasiresonant Half-Bridge DC/DC Converter for Renewable Energy Applications

Design and Analysis of Modified Series–Parallel Quasiresonant Half-Bridge DC/DC Converter for Renewable Energy Applications

Modelling, design, control, and implementation of advanced isolated DC/DC converters for renewable energy applications

Modelling, design, control, and implementation of advanced isolated DC/DC converters for renewable energy applications

Single Switch High Voltage Gain DC-DC Converter for Renewable Energy Applications

Single Switch High Voltage Gain DC-DC Converter for Renewable Energy Applications

A Soft-Switched SEPIC-Based High Voltage Gain DC–DC Converter for Renewable Energy Applications

A Soft-Switched SEPIC-Based High Voltage Gain DC–DC Converter for Renewable Energy Applications

Single switch high voltage gain DC-DC converter for renewable energy applications

Single switch high voltage gain DC-DC converter for renewable energy applications

Composite Switched Lyapunov Function-Based Control of DC–DC Converters for Renewable Energy Applications

Renewable energy sources play a pivotal role in the pursuit of sustainable and eco-friendly power solutions. While offering environmental benefits, they present inherent challenges. Photovoltaic systems rely on surrounding conditions, wind systems contend with variable wind speeds, and fuel cells are both costly and inefficient. Furthermore, the energy injected by renewable energy sources (RES) exhibits unpredictable behavior. To tackle these problems, researchers employ diverse power electronic devices and converters like inverters, power quality filters, and DC–DC choppers. Among these, DC–DC converters stand out for effectively regulating DC voltage and enhancing the efficiency of RESs. The meticulous selection of a suitable DC–DC converter, coupled with the integration of an efficient control technique, significantly influences overall power system performance. This paper introduces a novel approach to the design of switching controllers for DC–DC converters, specifically tailored for application in renewable energy systems. The proposed controller leverages the power of composite switched Lyapunov functions (CSLF) to enhance the efficiency and performance of DC–DC converters, addressing the unique challenges posed by renewable energy sources. Through comprehensive analysis and simulation, this study demonstrates the efficacy of the controller in optimizing power transfer, improving stability, and ensuring reliable operation in diverse renewable energy environments. Moreover, the small-scale DC–DC converter experiment’s findings are presented to confirm and validate the proposed scheme’s practical applicability.

Improved Interleaved Boost Converter with Soft-Switching: Analysis and Experimental Validation

This paper proposes a novel interleaved boost converter for renewable energy applications. The two-phase interleaved boost converter was improved with lossless passive snubber cells to ensure the Zero Voltage Switching (ZVS) condition. The ZVS condition is contributed by a resonant inductor, a resonant capacitor, and two diodes. The proposed converter was operated in continuous current mode on its primary side. The significant merits of this converter are reduced switching losses, better efficiency, and reduced input current ripples without auxiliary switches. The soft-switching ability of this converter is maintained under both light- and heavy-load conditions. This paper also presents the operating principles and design analysis of the proposed converter. Furthermore, a 50-320V prototype was operated at 250 W to validate the soft-switching operation and theoretical analysis, and the experimental results are presented.

High-Gain Multiport DC-DC Converter Topologies for Renewable Energy Applications: A Comprehensive Review

Renewable energy sources have emerged as favorable alternatives for meeting ever-increasing global energy demand. To harness the maximum efficiency from renewable sources, dc-dc converters play a crucial role. While the design of dc-dc converters varies depending on specific application, certain features such as multiport capability and high gain are generally desirable. Multiport structures offer advantages such as compactness and cost reduction, allowing for the efficient integration of various energy sources, storage units, and loads. On the other hand, high gain characteristics enable the step-up of output voltages from renewable energy sources to usable levels. In recent years, numerous converter topologies proposed to address these requirements and enhance overall system performance. This study aims to assist and provide guidance to researchers in the field by reviewing and comparing the most recent advancements in the design and implementation of multiport high-gain dc-dc converters for renewable energy applications. Through a comprehensive analysis of the existing literature, the primary objective of this study is to facilitate knowledge transfer, identify research gaps, and inspire future research endeavors in this domain. By synthesizing the knowledge gained from these studies, researchers can contribute to ongoing advancement of multiport converter technology in the context of renewable energy applications.

A Novel Three-Winding Coupled Inductor-Based High Step-Up DC-DC Converter for Renewable Energy Application

This paper presents a novel nonisolated high step-up dc-dc converter for renewable energy generation system. The converter combines a three-winding coupled inductor, voltage multiplier cells, and two power switches with simultaneous operation. Compared with existing high step-up converters, the proposed converter can achieve high voltage gain under a low number of turns ratio while avoiding a large duty cycle. Moreover, the passive clamp circuit recycles leakage inductor energy and reduces the voltage spike of switches. Continuity of input current and existence of a common ground between the input energy source and load make the converter suitable for renewable energy applications. Also, the proposed converter shares high voltage gain with low voltage stress on semiconductors (switches/diodes), improved compactness and high efficiency. The operating principles and steady-state analysis of the proposed converter are illustrated. Then the theoretical efficiency analysis, and performance comparison with other converters are discussed. Finally, a 200 W prototype with 380 V output voltage is established based on the design guidelines, and experimental results verify the accuracy of the theoretical analysis.

Switched Capacitor Based High Gain Boost Converter for Renewable Energy Application

Switched Capacitor Based High Gain Boost Converter for Renewable Energy Application

Intelligent RBF-Fuzzy Controller Based Non-Isolated DC-DC Multi-Port Converter for Renewable Energy Applications

In this article, a multi-port non-isolated converter is implemented for renewable energy applications. High voltage gain is accomplished with a switched capacitor and coupled inductor, and power transfer between the inputs, battery, and load can be realized using three power switches. The power collected in the leakage inductance is reused to decrease the voltage stress on the power switch. Various functioning periods are also examined, and design requirements are offered. The proposed converter uses fewer parts to realize power flows and obtain high voltage gain compared to comparable converters. Additionally, under partial shading conditions, the traditional maximum power point tracking (MPPT) approaches are not able to collect the global maximum power point (MPP) from the numerous local MPPs. This work proposes an artificial neural-network-based MPPT technique with variable step size for tracing speed, MPP oscillations, and operating efficiency. The proposed converter experiment is also constructed and successfully tested in a laboratory environment.

Decoupled control of a high step-up multi-input converter for renewable energy applications

This paper focuses on the development and control of a non-isolated high step-up multi-input dc–dc converter for renewable energy applications. The converter has non-pulsed input currents and high voltage gain owing to the input inductors and a switched-capacitor (SC) network. In a two-input case, there are only two low-side switches controlled independently for adjusting individual input power levels and another low-side switch for operating the SC network. Steady-state analysis and dynamic modelling of the converter are provided. Design procedures regarding the hardware and decoupled control system dealing with the interactions of the control loops are given. After a benchmark study, a laboratory prototype rated at 200-W validates the analysis and tests the control system when subjected to step changes.

Analysis and design of high gain DC-DC converter for renewable energy applications

ABSTRACT The paper proposes an efficient DC-DC converter for renewable energy applications. The proposed high-gain converter is designed with switched inductor cell and voltage multiplier cell. In the proposed converter, the continuous source current is obtained by switched inductor cells, and high-voltage gain is achieved using voltage multiplier cells. The proposed converter provides a voltage gain of 10 when operated with a duty ratio of 27.3%, whereas a voltage gain of 39 is obtained for an 80% duty ratio. The efficiency of 96.54% is achieved in simulation for the rated condition of 24 V/240 V, 120W. The converter operation under steady-state, state-space modelling, and voltage and current stress of the power semiconductor components are analyzed. In addition to that, loss distribution and efficiency analysis are made. The performance of the converter is analyzed using the Matlab Simulink tool. Also, the experimental hardware prototype model is developed to validate the simulated and theoretical analysis.

A New High Efficiency High Step-Up DC/DC Converter for Renewable Energy Applications

This article introduces a new nonisolated soft-switching coupled-inductor (CI) step-up dc/dc converter. The presented topology utilizes a three-winding CI (TWCI) along with a voltage multiplier circuit to increase the voltage conversion ratio without needing a high duty cycle. Using this circuit, a high voltage gain can be achieved without requiring a large number of turns ratio in the CI. The input current ripple of the introduced converter is very low, which is very desirable for renewable energy sources applications. The TWCI also creates an additional design freedom to increase the voltage gain, which indicates more circuit flexibility. Additionally, the voltage stress across the single power switch is limited with the help of a regenerative clamp capacitor. The leakage inductor of the CI is used to create a resonant tank to reduce power losses further. The leakage inductances help provide the zero-current switching conditions for the single power switch and decrease the reverse-recovery issues for all diodes, leading to an efficiency improvement. The operation principle, steady-state analysis, and design considerations are discussed thoroughly. Finally, the theoretical analysis is validated through experimental results obtained from a 200 W prototype with 250 V output voltage.

A new extended single-switch high gain DC–DC boost converter for renewable energy applications

High-gain DC/DC converters are considered one of the most important components of green energy systems. Large numbers of these converters are used for increasing the voltage gain by using an extreme duty cycle. However, it increases losses and the cost, degrades the system performance, and hence obtains a low efficiency. In this article, a new design of a high-gain DC/DC boost converter is proposed. This converter has the potential to be used in low input voltage applications that need a high voltage gain such as systems powered by solar photovoltaic panels and fuel cells. The new topology is characterized by its simplicity of operation, high voltage gain, better efficiency, continuity of the input current, reduced number of inductors and capacitors, and can be extended to get higher gains. The converter structure, principle of operation, and design consideration of inductors and capacitors are presented in detail. Derivation of power losses and efficiency is presented. A laboratory prototype is implemented, and various experimental tests are given. The achievement of the suggested design is confirmed and compared with other recent high-gain converters.

Design and Analysis of Quasi-Y Source High Gain DC/DC Resonant Converter for Renewable Energy Applications

This paper proposes a magnetically coupled partial resonant isolated quasi-Y source DC/DC converter. Here, to achieve soft switching, there is no additional auxiliary circuits or magnetic components are used. By making use of transformer’s parasitic elements like winding capacitance (Cp) and leakage inductance (Lk1), zero current switching (ZCS) is obtained at the turn-off instant of all MOSFETs. Hence, the converter can operate at a higher frequency, so that compact size and good efficiency are feasible. This converter inherits all the conventional impedance source converter features, and a higher gain is obtained by using three winding coupled inductor and isolation transformer with small shoot-through duty (dST). Hence, the continuous input current (CIC) and galvanic isolation feature of this converter is most suitable for renewable energy applications. Also, the output voltage is regulated by changing the switching frequency. Finally, a 300 W prototype is designed and tested in the laboratory. The simulation, experimental results with mathematical and design analysis are provided.

A high step‐up DC‐DC converter based on three‐winding coupled inductor and voltage multiplier for renewable energy applications

AbstractA high step‐up DC‐DC converter for renewable energy applications is proposed. Based on a three‐winding coupled inductor and two voltage multiplier cells, the proposed converter obtains a high voltage conversion ratio. Through the passive clamp circuit, the voltage stress of the main switch is suppressed and the leakage energy of the coupled inductor is recycled. This leads to utilize a low on‐state power resistance and low voltage‐rating power switch that decreases the conduction losses. Meanwhile, the current stress of the diodes is minimized and the reverse recovery problem is alleviated. Thus, high efficiency can be achieved. Under continuous conduction mode (CCM) and discontinuous conduction mode (DCM), different operating principles and the mathematical derivations of the proposed converter are described in detail. To validate the feasibility of the proposed converter, a 320 W prototype with 25–38 V input voltage and 400 V output voltage is implemented. The measured maximum and full load efficiencies are 95.83 % and 94.96 %, respectively.

Celery-like nitrogen and phosphorous co-doped carbon nanofiber frameworks supporting oxygen reduction and methanol oxidation electrocatalysis

Doped materials with well-defined morphologies have attracted substantial research interest due to their excellent activity and stability in fuel cells. Herein, celery-like nitrogen and phosphorous co-doped carbon nanofibers frameworks (PNCNF) have been successfully fabricated via a novel in-situ doping and self-assembly strategy, serving as superior supports for uniform Pt nanoparticles. The resulting Pt/PNCNF composite possesses a porous architecture and high-surface area, which exhibits remarkable mass activity, durability, and anti-poisoning ability towards oxygen reduction and methanol oxidation reactions, compared to the commercial Pt/C electrocatalyst. In addition, the high CO tolerance of Pt/PNCNF could be ascribed to a strong interaction between the Pt nanocrystals and PNCNF, which facilitates OH− adsorption to remove CO intermediate. The improved electrocatalytic properties benefit from the morphological and compositional advantages of the N and P co-doped carbon nanofiber frameworks. Specifically, the orientation of celery-like carbon nanofibers layers in Pt/PNCNF optimizes its mechanical properties. This synthetic strategy for the preparation of N and P co-doped carbon is envisaged as a new and general pathway for the rational engineering of heteroatom doped carbon composites for renewable energy conversion applications.