Conversion Efficiency Of Solar Cells Research Articles

Boosting the Efficiency of Perovskite/Organic Tandem Solar Cells via Enhanced Near-Infrared Absorption and Minimized Energy Losses.

The compatibility of perovskite and organic photovoltaic materials in solution processing provides a significant advantage in the fabrication of high-efficiency perovskite/organic tandem solar cells. However, additional recombination losses can occur during exciton dissociation in organic materials, leading to energy losses in the near-infrared region of tandem devices. Consequently, a ternary organic rear subcell is designed containing two narrow-bandgap non-fullerene acceptors to enhance the absorption of near-infrared light. Simultaneously, a unique diffusion-controlled growth technique is adopted to optimize the morphology of the ternary active layer, thereby improving exciton dissociation efficiency. This innovation not only broadens the absorption range of near-infrared light but also facilitates the generation and effective dissociation of excitons. Owing to these technological improvements, the power conversion efficiency (PCE) of organic solar cells increased to 19.2%. Furthermore, a wide-bandgap perovskite front subcell is integrated with a narrow-bandgap organic rear subcell to develop a perovskite/organic tandem solar cell. Owing to the reduction in near-infrared energy loss, the PCE of this tandem device significantly improved, reaching 24.5%.

Estimation of power conversion efficiency up to 12% of nanocomposites of catechin and carboxylated graphene quantum dots doped/functionalised with boron as photosensitizers in DSSC applications

ABSTRACT The power conversion efficiency (PCE) of dye-sensitised solar cells (DSSCs) measures their solar energy conversion performance. With PCEs below 15%, significant energy loss occurs, leading researchers to seek improvements to reduce fossil fuel dependence and enhance DSSCs as an alternative energy source. However, predicting PCE theoretically is challenging due to its dependence on various parameters. In this work, the improved normal model was used to predict the PCE accurately using DFT and TD-DFT of four nanocomposites consisting of catechin natural compound attached to carboxylated graphene quantum dots (GQD) that have been further doped at the centre/edge and decorated with a boronic group. The nanocomposites have been adsorbed on a TiO2 cluster for PCE estimation. This is the first attempt of using decorated GQD with boronic groups in a DSSC and estimating its PCE. The results show that the PCE of catechin improved from 0.077% to the range of 3.96% – 12.61% (B1-CG-C@TiO2 – B2-CG-C@TiO2). This was due to the improved short-circuit current density ( J sc ) and fill factor (FF) of all the nanocomposites and the improved open-circuit voltage ( V oc ) of all nanocomposites except B1-CG-C@TiO2 in comparison to catechin. This means all the designed nanocomposites are more promising candidates than catechin. Highlights Adsorption at carboxyl group is the most stable site among hydroxyl and GQD base. The improved normal model gives accurate V oc results. All designed nanocomposites exhibited higher PCEs than isolated catechin. Edged doping exhibited the highest V oc , high J sc , and highest PCE of 12.61%.

Enhanced Performance and Stability of Perovskite Solar Cells Through Surface Modification with Benzocaine Hydrochloride.

Current development of inverted p-i-n perovskite solar cells (PSCs), with nickel oxide as the hole transport layer, is progressing toward lower net costs, higher efficiencies, and superior stabilities. Unfortunately, the high density of defect-based traps on the surface of perovskite films significantly limits the photoelectric conversion efficiency and operational stability of perovskite solar cells. Finding cost-effective interface modifiers is crucial for the further commercial development of p-i-n PSCs. In the present work, we report a passivation strategy using a multifunctional molecule, benzocaine hydrochloride (BHC), which is shown to reduce defect density and enhance the photovoltaic performance and stability of the resultant p-i-n PSCs. It has been revealed that BHC strongly interacts with perovskite precursor components and triggers the evolution of the perovskite absorber film morphology and enables improved surface energy level alignment, thus promoting charge carrier transport and extraction. These properties are beneficial for improving open-circuit voltage (VOC) and fill factor (FF). Our results show that the photoelectric conversion efficiency (PCE) of p-i-n PSCs with nickel oxide as the hole transport layer increased from an initial 20.0% to 22.1% after being passivated with BHC, and these passivated devices also exhibited improved stability. DFT calculations reveal the unusual ability of the BHC passivant to improve band alignment while also preventing the accumulation of holes at the interface. In this work, the advantages of BHC passivation are demonstrated by linking theoretical calculations with optical and electrical characterizations.

A novel dual functional gradient Zn(O,S)/Mg electron-selective contact for dopant‐free silicon solar cells with efficiencies approaching 21 %

Dopant-free carrier-selective contacts have the potential to mitigate or eliminate parasitic absorption, auger recombination losses, etc. Therefore, the vigorous development of dopant-free carrier-selective contact materials is an important way to enhance the performance of crystalline silicon (c-Si) photovoltaics. This study presents the concept of magnetron sputtering gradient deposited zinc oxide (Gd-Zn(O,S)) combined with a low work function magnesium metal layer. Subsequently, the Gd-Zn(O,S)/Mg bifunctional layer was further investigated and optimised to determine its suitability as a contact layer for electron transfer in c-Si solar cells. This strategy simultaneously enables a good passivation and a low contact resistance. The c-Si(n)/a-Si:H(i)/Gd-Zn(O,S)/Mg devices are constructed and achieved an optimal contact recombination current density (J0) of approximately 1.51 fA cm−2, along with a minimum ρc of approximately 35.89 mΩ.cm2. As a consequence, the power conversion efficiency of a prototype silicon heterojunction solar cell is 20.92 %. This study demonstrates that the strategy of replacing the a-Si:H(n) electron transport layer with Gd-Zn(O,S) is an effective approach for improving the SHJ cell. This study also provides new perspectives for designing novel dopant-free carrier-selective contact structures.

Enhancing power conversion efficiency of lead-free perovskite solar cells: a numerical simulation approach

Enhancing power conversion efficiency of lead-free perovskite solar cells: a numerical simulation approach

UV-OZONE Treatment for Suppressing Surface Damages on Silicon Solar Cells.

In the preparation process of c-Si solar cells, qualified Si wafers must be processed through mechanical processing during manufacturing. Most of these processes involve mechanical processing, which inevitably results in severe mechanical damage layers and a wafer surface with large roughness. The current industry practice involves etching of the damage layer using an acid/alkali solution, and it is usually followed by deposition of additional passivation layers in the subsequent processes. However, even with these treatments, there still remain non-negligible microscopic saw damage and scratches on the wafer surface, which hinder the urgent development of a higher conversion efficiency of solar cells. Here, we provide a simple method to effectively suppress the impact of this surface damage. UV-OZONE treatment, which involves generation of an oxide layer and subsequent cleaning with hydrofluoric acid, leads to the effective regain of solar cell performance due to the passivation of dangling bonds and removal of sharp microstructures based on the creation of mechanical scratches. In addition, PEDOT:PSS/n-Si solar cells were prepared to exploit their strong surface dependence to investigate the effect of scratches on the overall performance. These results further validate the impact of scratches on solar cells, and a simple and effective method for surface damage suppression is provided.

Passivating perovskite surface defects via bidentate chelation for high-performing solar cells

Surface defects seriously damage carrier transport by forming non-radiative recombination centers on the perovskite film, which negatively affect the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Here we present a strong chelate coordination bond to anchor the surface of the perovskite film. Employing Bathophenanthroline (BPhen) as a π-conjugated bidentate chelator, the uncoordinated Pb2+ can be firmly anchored accompanying with the reduced surface recombination sites, giving rise to suppressed non-radiative recombination and enhanced charge carrier extraction. With the BPhen, the perovskite film shows an approximately threefold longer carrier lifetime than the control device, leading to a champion PCE of 24.09 % and a high stable performance with retained over 80 % of its initial efficiency after 1000 h exposed to relative humidity (RH) of 65 ± 5 %.

Achieving stable organic solar cells with 19.2 % efficiency via fine interpenetrating network with fused-ring aromatic lactone donor

The ternary strategy has enhanced the power conversion efficiency (PCE) of organic solar cells. However, long-term stability remains a challenge due to heat-induced molecular interactions and excessive self-aggregation. The fused-ring aromatic lactone (FAL) unit, with its extended molecular plane and electron-withdrawing ability, acts as an ideal building block in our newly designed donor P35. By introducing P35 into PM6:L8-BO systems, it optimizes film morphology and enhances π-π stacking, facilitating phase separation and balancing charge transport channels. The electron-withdrawing capability of P35 lowers the HOMO levels, thereby decreasing non-radiative recombination. Additionally, the extended molecular plane of P35 provides structural support to prevent the collapse of fiber-like PM6 and crosslinks with PM6 to form a thermodynamically stable interpenetrating network. This effectively limits the formation of isolated SMA islands, thereby minimizing the degeneration of the active layer. Consequently, an optimized PCE of 19.2 % (certified 18.55 %) is achieved in the PM6:P35:L8-BO devices, which still retains 80 % initial PCE under 600 h of AM 1.5 G illumination and 90 % PCE after 950 h storage in darkness. This research emphasizes the importance of electron-withdrawing capabilities and extended molecular planes in achieving long-term stability and high efficiency.

Interfacial modification by 2-fluoroisonicotinic acid enabling high-efficiency and stable n-i-p perovskite solar cells

The power conversion efficiency (PCE) of organic-inorganic halide perovskite solar cells (PSCs) developed rapidly in recent years. However, the defects at the bulk grain boundaries and heterojunction interfaces acting as non-radiative recombination centres and the ion-migration channels severely hinder the charge transport and stability of the PVKs, resulting in low PCE and poor stability. One of the principal impediments to the commercialization of PSCs resides in the challenge posed by this particular aspect. In this work, we employed 2-fluoroisonicotinic acid (2-FINA) as a passivation agent to improve the PCE and stability of n-i-p PSCs by interfacial modification strategy. Owing to the presence of carboxyl (COOH) functional groups and pyridine groups, 2-FINA can strongly interact with uncoordinated Pb2+ and regulate the growth of perovskite crystals, which in turn reduces ion migration and suppress non-radiative recombination along with improves optical properties. Thanks to these improvements, the champion n-i-p PSC solar cell, treated with 2-FINA, showed a PCE of 20.92 %, whereas the untreated one in the same batch exhibited a PCE of 17.13 %. In long-term stability tests, we demonstrated that 2-FINA treatment significantly increases the moisture resistance of non-encapsulated devices.

Regulation of Lead Iodide Crystallization and Distribution for Efficient Perovskite Solar Cells.

At present, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has reached 26.1%. Polycrystalline perovskite films prepared by sequential deposition are often accompanied by excess PbI2. Although excess PbI2 can reduce the internal defects of the perovskites and promote charge transfer, excess PbI2 is unevenly distributed in the perovskites and easily decomposed into the composite center of charge. Therefore, the growth and distribution of PbI2 crystals can be regulated by introducing 4-fluoroaniline (4-FLA) as an additive into the precursor of PbI2. We observe that the presence of an amino group in 4-FLA leads to a reduction in the strength of van der Waals forces between PbI2 layer structures, thereby facilitating the uniform dispersion of excess PbI2 within the perovskites. Additionally, 4-FLA is restricted from being embedded in the PbI2 layer due to the steric hindrance of 4-FLA and the hydrogen bond interaction between nitrogen atoms and PbI2. Therefore, it leads to better dispersion of PbI2, resulting in better passivation and device efficiency. Based on the hydrophobicity of the benzene ring, the modified perovskite film shows excellent hydrophobicity. Ultimately, we achieved 21.63% PCE and 1.16V VOC. This provides an effective strategy for regulating excess PbI2 to achieve efficient and stable PSCs.

Delicate Regulation of Central Substituents Boosts Organic Photovoltaic Performance of Dimeric Acceptors.

Dimeric acceptors are expected to satisfy both excellent power conversion efficiency (PCE) and operational stability of organic solar cells (OSCs). However, comparing to highly planar and symmetrical monomer-like acceptors, the quite different steric/spatial configurations of dimeric acceptors affect device outcomes greatly. Herein, on basis of the same dimeric molecular platform that constructed by bridging central units of two monomer-like acceptor, diverse substituents (─OCH3 for D1, ─CH3 for D2, and ─CF3 for D3) are grafted on central units to regulate the three dimensions (3D) geometries of dimeric acceptors delicately. A systematic investigation reveals the substituent-dependent variation of energy level, absorption, and molecular packing behavior. Consequently, D2 acceptor, characteristic of more favorable configuration, affords a superior film morphology and charge transfer/transport dynamics in resulting OSCs, thus yielding an excellent PCE of 17.50% along with a good long-term stability. This work manifests the crucially important role of central substituents in constructing high-performance dimeric acceptors.

Dimeric Small Molecule Acceptors via Terminal-End Connections: Effect of Flexible Linker Length on Photovoltaic Performance.

The dimerization of small molecule acceptors (SMAs) holds significant potential by combining the advantages of both SMAs and polymer acceptors in realizing high power conversion efficiency (PCE) and operational stability in organic solar cells (OSCs). However, advancements in the selection and innovation of dimeric linkers are still challenging in enhancing their performance. In this study, three new dimeric acceptors, namely DY-Ar-4, DY-Ar-5, and DY-Ar-6 are synthesized, by linking two Y-series SMA subunits via an "end-to-end" strategy using flexible spacers (octyl, decyl, and dodecyl, respectively). The influence of spacer lengths on device performance is systematically investigated. The results indicate that DY-Ar-5 exhibits more compact and ordered packing, leading to an optimal morphology. OSCs based on PM6: DY-Ar-5 achieves a maximum PCE of 15.76%, attributes to enhance and balance carrier mobility, and reduce carrier recombination. This dimerization strategy using suitable non-conjugated linking units provides a rational principle for designing high-performance non-fullerene acceptors.

Amphipathic Astaxanthin Additive for Low Voltage-loss Perovskite Solar Cells With Enhanced Quasi-Fermi Level Splitting and Solar Hydrogen Production Application.

Even though the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is nearly approaching the Schottky-Queisser limit, low open-circuit voltage (Voc) and severe Voc loss problems continue to impede the improvement of PCEs. Astaxanthin (ASTA) additive is introduced in the formamidinium lead triiodide (FAPbI3)perovskite film as an additive, which can facilitate the transportation of charge carriers and interact with Pb2+ by its distinctive groupings. Furthermore, the addition of ASTA decreases the defect's active energy, regulates the deep-level defect by filling up the grain boundaries (GBs), and promotes the crystallization of perovskite film. Remarkably, an enhanced quasi-Fermi level splitting (QFLS) of 1.164eV and a reduced Voc loss of only 96mV are realized. The champion PCE of 24.56% is attained by ASTA-modified PSCs on the basis of 22.75% PCE. Moreover, the PSCs that underwent ASTA modification demonstrate improved operational stability, ensuring consistent output in real-world scenarios. Furthermore, PSCs with an active area of 1 cm2 are used for water electrolysis to produce hydrogen and exhibit a PCE of 22.41%. This work offers an environmentally benign solution to address the inherent issues of FAPbI3 PSCs and lays the groundwork for the development of a prospective solar hydrogen production application.

Achieving 11.23 % efficiency in CZTSSe solar cells via defect control and interface contact optimization

The high open-circuit voltage deficit (VOC, def) caused by structural imperfections in the absorber layer and charge loss during carrier transport is a critical barrier affecting the performance of Cu2ZnSn(S,Se)4 (CZTSSe) devices. In this work, Ag was added to the DMF-based Cu+-Sn4+ system, which significantly improved the crystal morphology and electrical properties of the absorber layer. Additionally, optimizing the selenization process not only reduced surface roughness and eliminated voids at the bottom of the absorber layer but also resulted in the formation of a MoSe2 back interface layer with a more suitable thickness. These measures collectively enhanced the overall quality of the absorber layer, reducing the formation of deep-level defect clusters and effectively boosting carrier transport efficiency. Consequently, the concentration of bulk and interfacial defects decreased, and the impact of potential barriers on carrier movement was minimized. With these comprehensive improvements, the power conversion efficiency of CZTSSe solar cells increased from 8.48 % to 11.23 %. Our research demonstrates that optimizing the structure of the absorber layer can effectively enhance the performance of CZTSSe solar cells, providing valuable insights for the fabrication of high-efficiency devices in the future.

Application of AgInSe2 nanoparticles to boost the power conversion efficiency of CdS QDs-sensitized solar cells

In this study, bandgap engineering was utilized to assess the efficiency of photoanodes incorporating CdS nanocrystals and AgInSe2 (AISe) quantum dots (QDs) in quantum dot-sensitized solar cells (QDSSCs). Initially, the deposition of CdS(Xc) nanocrystal layers on a TiO2 substrate was tested using the SILAR method with varying cycles (X = 1-6). Optical transmission analysis revealed a redshift in the absorption edge and reduced transmission with an increasing number of cycles. J-V analysis of TiO2 NCs/CdS(Xc) photoanodes identified cycle X=5 as optimal. The short-circuit current density (Jsc), open-circuit voltage (Voc), fill factor (FF) and maximum power conversion efficiency (PCE) were 15.5 mA/cm2, 614 mV, 40%, and 3.76%, respectively. Subsequently, pre-synthesized AISe QDs were deposited on TiO2 nanocrystals/CdS(Xc) photoanodes, exhibiting a single absorption edge with a bandgap energy of 2.19 eV for all photoanodes. The TiO2 NCs/CdS(5c)/AISe/ZnS photoanode showed an increase in Jsc and efficiency, reaching 17.25 mA/cm2 and 4.27%, respectively. Utilizing sub-micron-sized TiO2 hollow spheres (HSs) as a light-scattering layer further enhanced light absorption and performance. It was demonstrated that this approach increased the photovoltaic parameters to a Jsc of 19.12 mA/cm2, FF of 43%, and an overall efficiency of 4.75%.

Cutting-edge technologies and recent modernization on multifunctional perovskite materials for green energy conversion and spintronic applications

This featured letter summarizes the recent developments in green energy and spintronic technologies based on multifunctional i.e., multiferroic (MF) and magnetoelectric (ME) materials. These are non-toxic materials, find applications in spintronic, non-volatile memory devices, microelectromechanical systems (MEMS), photovoltaics and next generation IC miniaturization devices. Recent studies on MF and ME materials have probed and analyzed significant properties such as evidence of photo-response and significant power conversion efficiency (PCE) of multiferroic-based solar cells (SCs), evidence of electro-caloric effect (ECE) which find usage in non-toxic solid state refrigeration devices, photo- and electro-catalytic activities for green hydrogen generation, magnon-phonon coupling and existence of magnon polarons which can facilitate spintronic device technology and thermal Hall effect and, hybrid nano-generators utilized to empower portable electronic devices. All such applications are comprehensively analyzed in-depth in this letter.

Influence of the magnetic field on the shunt resistance of an n+p-p+ silicon solar cell in the frequency modulation

A photovoltaic cell is a device that generates electricity directly from visible light. Several factors affect the conversion efficiency of solar cells. Parasitic resistances such as the shunt resistance is a fundamental parameter of the equivalent electrical model of the solar cell, which induces the leakage current of electrical charges when its value is low. It represents all leakage currents within the solar cell. It is also an indicator of good or poor quality of a solar cell, since a high value indicates low leakage current through the cell, and vice versa. A number of measurement techniques are used to determine the leakage current, in particular electrical current and voltage.

Enhancing Perovskite Solar Cell Performance through Propylamine Hydroiodide Passivation.

In recent years, the power conversion efficiency of perovskite solar cells has increased rapidly. Perovskites can be prepared using simple and cost-effective solution methods. However, the perovskite films obtained are usually polycrystalline and contain numerous defects. Passivation of these defects is crucial for enhancing the performance of solar cells. Here, we report the use of propylamine hydroiodide (PAI) for defect passivation. We found that PAI can result in higher-efficiency cells by reducing the defects and suppressing non-radiative recombination. Consequently, n-i-p perovskite solar cells with a certificated efficiency of 21% were obtained. In addition, PAI exhibited excellent performance in p-i-n devices by serving as a buried interface layer, leading to an improved efficiency of 23%.

Doubling Power Conversion Efficiency of Si Solar Cells.

Improving solar cells' power conversion efficiency (PCE) is crucial to further the deployment of renewable electricity. In addition, solar cells cannot function at exceedingly low temperatures owing to the carrier freeze-out phenomenon. This report demonstrates that through temperature regulation, the PCE of monocrystalline single-junction silicon solar cells can be doubled to 50-60% under monochromatic lasers and the full spectrum of AM 1.5 light at low temperatures of 30-50 K by inhibiting the lattice atoms' thermal oscillations for suppressing thermal loss, an inherent feature of monocrystalline Si cells. Moreover, the light penetration, determined by its wavelength, plays a critical role in alleviating the carrier freeze-out effect and broadening the operational temperature range of silicon cells to temperatures as low as 10 K. Understanding these new observations opens tremendous opportunities for designing solar cells with even higher PCE to provide efficient and powerful energy sources for cryogenic devices and outer and deep space explorations.

Small molecule induced interfacial defect healing to construct inverted perovskite solar cells with high fill factor and stability

Chemical defects at the surface and grain boundaries of perovskite crystals cause deterioration of conversion efficiency and stability of perovskite solar cells (PSCs). In this study, a multifunctional additive, 5-fluoro-2-pyrimidine carbonitrile (FPDCN) molecule, is added into the perovskite precursor solution in order to passivate the uncoordinated Pb2+ by the cyanogen (–CN) group and pyrimidine N in FPDCN. Interestingly, fluorine (F) atoms interact with FA+ to form hydrogen bonds, which could regulate the perovskite crystallization process for the formation of high-quality perovskite crystals. Besides, the F atoms in FPDCN increase the water contact angle of perovskite films. As a result, the carrier extraction and transport in the perovskite film are significantly enhanced, and the non-radiative recombination is suppressed. The corresponding devices achieve a champion photovoltaic conversion efficiency (PCE) of 20.7 % and a fill factor (FF) of over 83 %. The device based on FPDCN shows long-term stability under a high-humidity atmospheric environment by maintaining 85 % of the initial efficiency after aging of 700 h in the glove box. This study provides a simple and convenient method to prepare stable and efficient PSCs by optimizing the perovskite precursor solution.