Conventional Wastewater Treatment Plants Research Articles

Biodegradation kinetics of organic micropollutants in biofilters for advanced wastewater treatment – Impact of operational conditions and biomass origin on removal

Biofiltration processes are often part of advanced wastewater treatment (aWWT) technologies for the removal of organic micropollutants (OMP) from conventional wastewater treatment plant (WWTP) effluents. Although biological effects are not always the main focus of these technologies (e.g. filtration through granular activated carbon), they have been shown to contribute significantly to total OMP removal. While OMP biodegradation kinetics in conventional biological wastewater treatment are well researched, no systematic comparison to biomass from aWWT is available. This biomass faces different growth conditions and higher OMP concentrations relative to the background organic matter. Adaptation to these conditions could be possible and could lead to faster OMP biodegradation kinetics, which would show in a larger pseudo first-order biodegradation kinetic constant kbiol. In this work, kbiol values for biomass obtained from aWWT biofilters were determined by evaluating OMP removals measured in lab-scale biofilters using a mechanistic model of the experimental setup. A comparison to kbiol values from literature for conventional wastewater treatment (with nutrient removal) revealed similar OMP biodegradation kinetics without any advantages of biomass from aWWT. A conceptual evaluation of influencing factors on OMP removal in biofilters showed that operational parameters (such as the biomass concentration or the empty bed contact time) and the affinity of OMPs to adsorb on biomass have a significant additional effect on biological OMP removal. Therefore, kbiol values alone are not sufficient to estimate biological OMP removal in biofilters and further information about the system is required.

Sequential Anaerobic-Aerobic Treatment Enhances Sulfamethoxazole Removal: From Batch Cultures to Observations in a Large-Scale Wastewater Treatment Plant.

Sulfamethoxazole (SMX) passes through conventional wastewater treatment plants (WWTPs) mainly unaltered. Under anoxic conditions sulfate-reducing bacteria can transform SMX but the fate of the transformation products (TPs) and their prevalence in WWTPs remain unknown. Here, we report the anaerobic formation and aerobic degradation of SMX TPs. SMX biotransformation was observed in nitrate- and sulfate-reducing enrichment cultures. We identified 10 SMX TPs predominantly showing alterations in the heterocyclic and N4-arylamine moieties. Abiotic oxic incubation of sulfate-reducing culture filtrates led to further degradation of the major anaerobic SMX TPs. Upon reinoculation under oxic conditions, all anaerobically formed TPs, including the secondary TPs, were degraded. In samples collected at different stages of a full-scale municipal WWTP, anaerobically formed SMX TPs were detected at high concentrations in the primary clarifier and digested sludge units, where anoxic conditions were prevalent. Contrarily, their concentrations were lower in oxic zones like the biological treatment and final effluent. Our results suggest that anaerobically formed TPs were eliminated in the aerobic treatment stages, consistent with our observations in batch biotransformation experiments. More generally, our findings highlight the significance of varying redox states determining the fate of SMX and its TPs in engineered environments.

Amphetamine-like substances and synthetic cathinones in Portuguese wastewater influents: Enantiomeric profiling and role of suspended particulate matter

Wastewater based epidemiology (WBE) has been used worldwide to estimate drug consumption routinely. Even though WBE provides valuable data to support legal and health interventions associated to drug use, monitoring studies in Portuguese wastewaters are scarce. Hence, this work aimed to estimate the consumption of some conventional abuse and illicit drugs such as amphetamine (AMP), methamphetamine (MAMP), 3,4-methylenedioxymethamphetamine (MDMA), and the synthetic cathinones buphedrone (BPD), butylone (BTL), 3,4-dimethylmethcathinone (3,4-DMMC) and 3-methylmethcathinone (3-MMC), considering not only the liquid phase, but also the suspended particulate matter (SPM). Moreover, the enantiomeric profiling of the samples was studied, exploring for the first time the possible enantioselective sorption of these drugs onto SPM. For that, 24 h composite raw wastewaters were collected from a conventional wastewater treatment plant (WWTP) in Portugal. After extraction, the liquid phase and SPM extracts were derivatized with an enantiomerically pure reagent and then, analysed using a gas chromatography-mass spectrometry (GC-MS) analytical method. The results showed a low and non-enantioselective adsorption to SPM at environmental relevant levels. Only (S)-AMP was detected in two SPM samples, whereas AMP, MAMP, MDMA, BPD, and 3,4-DMMC were detected in the liquid phase. AMP was the most frequently found drug with an estimated load up to 166.0 mg day−1 1000 people−1 and mostly found with enrichment of (S)-AMP. Nevertheless, (R)-AMP was also determined, which may be related to the consumption of either the illicit racemic AMP or the medicine (R)-deprenyl. The use of MDMA, MAMP and synthetic cathinones (BPD and 3,4-DMMC) was also suggested in Portugal. Nevertheless, the levels and the consumption estimate of the target chemicals were lower than in other European countries or worldwide. These findings provide the first step to the implementation of WBE monitoring campaigns to assess the status of drug consumption in Portuguese communities, contributing to the understanding of drug use patterns and trends worldwide and helping enforce preventive measures.

Evaluating Microplastics Removal Efficiency of Textile Industry Conventional Wastewater Treatment Plant of Thailand

Evaluating Microplastics Removal Efficiency of Textile Industry Conventional Wastewater Treatment Plant of Thailand

Hybrid constructed wetlands and filamentous fungi for treatment of mixed sewage and industrial effluents.

Developing countries face multifaceted problems of water pollution and futile measures to combat water pollution. This study was conducted to explore the potential application of sustainable nature-based solutions, hybrid constructed wetlands, and the application of filamentous fungi to treat polluted river water that receives sewage and industrial wastewater. A pilot-scale hybrid constructed wetland design comprising two types of floating plants in distinct tanks along with a floating wetland and a free-water surface wetland connected in series was commissioned and tested. The system successfully removed organic pollution (BOD 94% and COD 90%), nutrients (NH4-N and NO3-N 67% and PO4-P 81%), and heavy metals (Cr 75%, Ni 56%, and Fe 79%) in 40h and showed a high buffering capacity to cope with the varying pollutant loads. Metagenomics analysis of treated and untreated samples of river water revealed a diversified spatial bacterial community with ~ 25% sequences related to sulfur-metabolizing bacteria, genus Sulfuricurvum. The application of an immobilized strain of A. niger as a mycoremediation technique was also tested. It successfully removed pollutants in the combined sewage and industrial wastewater present in river water: COD (96%), TSS (97%), NH4-N (65%), NO3-N (67%), and PO4-P (78%). This study demonstrated that hybrid constructed wetlands and mycoremediation can be used as sustainable wastewater treatment options in the local context and also in developing countries where most of the conventional wastewater treatment plants do not operate.

Zinc/Magnesium Ferrite Nanoparticles Functionalized with Silver for Optimized Photocatalytic Removal of Malachite Green.

Water pollution is a major environmental challenge. Due to the inefficiency of conventional wastewater treatment plants in degrading many organic complex compounds, these recalcitrant pollutants end up in rivers, lakes, oceans and other bodies of water, affecting the environment and human health. Semiconductor photocatalysis is considered an efficient complement to conventional methods, and the use of various nanomaterials for this purpose has been widely explored, with a particular focus on improving their activity under visible light. This work focuses on developing magnetic and photoactive zinc/magnesium mixed ferrites (Zn0.5Mg0.5Fe2O4) by sol-gel and solvothermal synthesis methods, which are two of the most important and efficient methods used for the synthesis of ferrite nanoparticles. The nanoparticles (NPs) synthesized by the sol-gel method exhibited an average size of 14.7 nm, while those synthesized by the solvothermal method had an average size of 17.4 nm. Both types possessed a predominantly cubic structure and demonstrated superparamagnetic behavior, reaching a magnetization saturation value of 60.2 emu g-1. Due to the high recombination rate of electrons/holes, which is an intrinsic feature of ferrites, surface functionalization with silver was carried out to enhance charge separation. The results demonstrated a strong influence of adsorption and of the deposition of silver. Several optimization steps were performed during synthesis, allowing us to create efficient catalysts, as proved by the almost full removal of the dye malachite green attaining 95.0% (at a rate constant of 0.091 min-1) and 87.6% (at a rate constant of 0.017 min-1) using NPs obtained by the sol-gel and solvothermal methods, respectively. Adsorption in the dark accounted for 89.2% of the dye removal for nanoparticles prepared by sol-gel and 82.8% for the ones obtained by the solvothermal method. These results make mixed zinc/magnesium ferrites highly promising for potential industrial application in effluent photoremediation using visible light.

External carbon source as a viable tool for controlling antibiotics and antibiotic resistance genes (ARGs) in effluent: Influence on antibiotic removal and ARGs dissemination

Fluoroquinolone antibiotics and antibiotic resistance genes (ARGs) regarded as emerging contaminants were poorly removed in conventional wastewater treatment plants (WWTPs). Nitrogen-containing heterocyclic organics were found to be biodegraded through denitrification co-metabolism. The feasibility to enhance antibiotics removal efficiency in WWTPs through denitrification co-metabolism needs to be further verified. Meanwhile, due to significant correlation between ARGs profiles and nitrogen removal that was previously observed, the dissemination of ARGs during denitrification was worthy of in-depth understanding. Herein, the antibiotic removal and ARGs dissemination in denitrification co-metabolism condition were investigated with different denitrifying consortiums that acclimated under different conditions in terms of carbon source and the exposure of Ofloxacin (OFL). The results suggest that the removal of OFL can be enhanced by the denitrification co-metabolism. The tolerance to OFL is different among various denitrifying communities. For the denitrifying consortiums acclimated with methanol, long-term exposure to trace OFL (1 μg/L) could reduce the capabilities of removal and tolerance to OFL. On the contrary, those acclimated with sodium acetate (NaAc), the capabilities of removal and tolerance to OFL, were enhanced by long-term exposure to trace OFL. According to the quantitative determination to 384 target genes with high-throughput quantitative PCR, the abundance of ARGs in consortiums greatly increased when exposed to OFL at the concentration of comparable to sewage, which was also much larger than that acclimated with methanol. It can be confirmed and supported by DNA sequencing results that the antibiotic removal and the dissemination of ARGs were determined by microbial community that could be shaped with carbon source. These conclusions suggest that selecting the right external carbon source can be a useful strategy for WWTPs to control antibiotics and ARGs in the effluent. From a new perspective on mitigating ARGs dissemination, NaAc was not an appropriate carbon source.

Reduction in the Input of Microplastics into the Aquatic Environment via Wastewater Treatment Plants in Germany

Microplastic (MP) has emerged as a significant environmental challenge due to increased plastic production and its widespread presence in the environment. This study aimed to assess MP concentrations throughout the treatment process at nine wastewater treatment plants (WWTPs) in Germany, from influent to effluent. A customized sampling technique was employed, followed by field and laboratory preparation and the quantification of polymers (PE, PP, PS, PMMA, and PET) using TED-GCMS. MP concentrations decreased progressively in the WWTPs, with influent concentrations ranging from 2.5 to 13.6 mg/L. Effluent concentrations in the conventional WWTPs ranged from 0.001 to 0.051 mg/L, while advanced treatment via filtration yielded concentrations below the limit of quantification at 0.005 mg/L. All tested of the WWTPs demonstrated an over 99% removal efficiency for microplastics. Despite effective retention by the WWTPs, a critical evaluation of the results is necessary. There is a need to optimize existing technologies and enhance the standardization of sampling, processing, and measurement methods, as well as intensify efforts towards creating preventive measures to reduce plastic emissions.

Enhancing volatile fatty acid production in batch test reactors by modulating microbial communities with potassium permanganate

The shift from conventional wastewater treatment plants to biorefineries is one of the most environmentally and economically sustainable pathways for extracting valuable compounds from waste. Besides chemical-physical processes, microorganisms within sewage sludge utilize organic and inorganic pollutants in the wastewater as nutrients, leading to effective water purification. However, the remaining solid sludge residue, typically destined for specific landfills or incineration, could undergo microbial fermentation to produce volatile fatty acids (VFA), metabolic precursors for biopolymers. Increasing attention has been directed towards optimizing operational parameters to enhance VFA production during sewage sludge fermentation. This study examined the impact of potassium permanganate (PP) on microbial communities during the sewage sludge's acidogenic fermentation. The results highlighted the positive effect of PP treatment, which increased COD production and VFA yield up to 1263.5 mg/L and 664.2 mg COD/L, respectively. The presence of PP significantly enhances VFA yield promoting bacteria positively linked to VFA production.

Assessing the impact of two conventional wastewater treatment plants on small streams with effect-based methods

Sixty percent of discrete surface water bodies in Europe do not meet the requirements for good ecological and chemical status and in Germany, the situation is even worse with over 90% of surface water bodies failing to meet the threshold. In addition to hydromorphological degradation, intensive land use and invasive species, chemical pollution is primarily considered to be responsible for the inadequate ecological status of the water bodies. As a quantitatively important source of micropollutants, wastewater treatment plants (WWTPs) represent an important entry path for chemical stressors. It is therefore important to analyze the effectiveness of the WWTPs in eliminating micropollutants and other chemical stressors to mitigate the negative impacts of the treated wastewater (WW) in aquatic ecosystems. Accordingly, in this study, we evaluated the impacts of two conventional, medium-sized WWTPs on their small receiving water systems in the southwestern region of Hessen in Germany during two sampling campaigns (spring and fall) using effect-based methods (EBM). We hypothesized that due to the insufficient elimination of micropollutants, a broad spectrum of toxic effects would be detected in conventionally treated WW and also in the receiving surface waters downstream the WWTPs. As EBMs a battery of in vitro assays and active biomonitoring using two in vivo assays were applied. The results supported our hypothesis and showed that the untreated WW had a very high baseline toxicity and also high endocrine and mutagenic activities. Conventional WW treatment, consisting of mechanical and biological treatment with nitrification, denitrification and phosphate precipitation, reduced baseline toxicity by more than 90% and endocrine activities by more than 80% in both WWTPs. Despite these high elimination rates, the remaining baseline toxicity, the endocrine, dioxin-like and mutagenic activities of the conventionally treated WW were so high that negative effects on the two receiving waters were to be expected. This was confirmed in the active monitoring with the amphipod Gammarus fossarum and the mudsnail Potamopyrgus antipodarum, as mortality of both species increased downstream of the WWTPs and reproduction in P. antipodarum was also affected. These results indicate that advanced WW treatment is needed to more effectively eliminate chemical stressors to prevent negative impacts of treated WW particularly in small receiving waters.

Separation of Cellulose from Wastewater and Valorisation via Pyrolysis: A Case Study in the Czech Republic

Currently, the recovery of resources from urban wastewater (WW) represents a priority. On this topic, the potential recovery of cellulose for its subsequent reuse in different sectors is gaining interest. In this work, a large-size conventional wastewater treatment plant (WWTP) was selected as a case study. A preliminary mechanical treatment was used, with the aim of separating, quantifying, and characterizing cellulose in WW. The results suggest that the per-capita production of dry primary cellulosic sludge (D-PCS) is equal to 1.46 ± 0.13 kgD-PCS PE−1 y−1, with an average calorific value of 21.04 MJ kg−1DM. Cellulosic fibres have an average length of >100 µm and a thickness of 2–5 µm. The D-PCS was subsequently treated via medium-temperature pyrolysis; a total of 29.5% of the initial D-PCS was converted into pyrolyzed primary cellulosic sludge (P-PCS) and only 26% into pyrolytic gas. More than 44.5% of the dried cellulose can be converted into pyrolytic oil. Moreover, three different scenarios of recovery have been considered, and the impact of cellulose separation in terms of COD fluxes entering the WWTP and potential energy recovery has been studied. The results suggested that, in this case study, the potential separation of the primary cellulosic sludge from the influent water flux would have no significant impact on COD load entering the biological treatments and biogas production in the anaerobic digestion of the secondary sludge.

Naturalization of treated wastewater by a constructed wetland in a water-scarce Mediterranean region

The effluents from conventional wastewater treatment plants (WWTP), even if accomplishing quality regulations, substantially differ in their characteristics with those of waters in natural environments. Constructed wetlands (CWs) serve as transitional ecosystems within WWTPs, mitigating these differences and restoring natural features before water is poured into the natural environment. Our study focused on an experimental surface-flow CW naturalizing the WWTP effluent in a semiarid area in Eastern Spain. Despite relatively low pollutant concentrations entering the CW, it effectively further reduced settled organic matter and nitrogen. Dissolved organic matter (DOM) reaching the CW was mainly protein-like, yet optical property changes in the DOM indicated increased humification, aromaticity, and stabilization as it flowed through the CW. Flow cytometry analysis revealed that the CW released less abundant but more active bacterial populations than those received. MiSeq Illumina sequencing highlighted changes in the prokaryotic community composition, with phyla Proteobacteria, Bacteroidetes, Firmicutes, and Actinobacteria dominating the CW outflow. Functional prediction tools (FaproTax and PICRUSt2) demonstrated a shift towards microbial guilds aligned with those of the natural aquatic environments, increased aerobic chemoheterotrophs, photoautotrophs, and metabolic reactions at higher redox potentials. Enhanced capabilities for degrading plant material correlated well with changes in the DOM pool. Our findings emphasize the role of CWs in releasing biochemically stable DOM and functionally suited microbial populations for natural receiving environments. Consequently, we propose CWs as a naturalization nature-based solution (NBS) in water-scarce regions like the Mediterranean, where reclaimed discharged water can significantly contribute to ecosystem's water resources compared to natural flows.

Mathematical modeling of a conventional wastewater treatment plant in Gamasa- Egypt

Mathematical modeling of a conventional wastewater treatment plant in Gamasa- Egypt

Fuzzy Approach for Evaluating Critical Factors in the Design and Construction of Conventional Wastewater Treatment Plants

Fuzzy Approach for Evaluating Critical Factors in the Design and Construction of Conventional Wastewater Treatment Plants

Direct application of chemically enhanced primary treatment in a municipal wastewater treatment plant: A case study

A feasible and efficient implementation of an Fe-based chemically enhanced primary treatment (CEPT) in a large conventional wastewater treatment plant (WWTP) was thoroughly evaluated. The influence of the velocity gradient and hydraulic retention time in the coagulation and flocculation stages, as well as the coagulant (FeCl3) dosage, were evaluated at lab-scale. Standard Jar Tests were performed to simulate CEPT, and the results were compared with those obtained by primary settling without coagulant. The increase in FeCl3 dosage and flocculation hydraulic retention time (HRTF) increased the primary settling COD removal capacity between 6.6% and 18.1%, highlighting its effect on the easily biodegradable COD fraction. The COD removal capacity increased up to 16.8% when working with an HRTF of less than 4 min, facilitating CEPT direct application in conventional WWTPs, avoiding the need to incorporate flocculation chamber, with a corresponding decrease in the associated implementation cost. The presence of residual Fe in the primary settling effluent and an increase in the primary sludge volume were the main drawbacks of the process. The coagulation and flocculation velocity gradients or the coagulation hydraulic retention time did not significantly influence the process.

Novel method for rapid monitoring of OPFRs by LLE and GC–MS as a tool for assessing biodegradation: validation and applicability

Organophosphate flame retardants (OPFRs) are high-production volume chemicals widely present in environmental compartments. The presence of water-soluble OPFRs (tri-n-butyl phosphate (TnBP), tris(2-butoxyethyl) phosphate (TBEP), tris(2-chloroethyl) phosphate (TCEP), tris(2-chloroisopropyl) phosphate (TCPP), and triethyl phosphate (TEP)) in water compartments evidences the struggle of conventional wastewater treatment plants (WWTPs) to effectively eliminate these toxic compounds. This study reports for the first time the use of white-rot fungi as a promising alternative for the removal of these OPFRs. To accomplish this, a simple and cost-efficient quantification method for rapid monitoring of these contaminants’ concentrations by GC–MS while accounting for matrix effects was developed. The method proved to be valid and reliable for all the tested parameters. Sample stability was examined under various storage conditions, showing the original samples to be stable after 60 days of freezing, while post-extraction storage techniques were also effective. Finally, a screening of fungal degraders while assessing the influence of the glucose regime on OPFR removal was performed. Longer chain organophosphate flame retardants, TBP and TBEP, could be easily and completely removed by the fungus Ganoderma lucidum after only 4 days. This fungus also stood out as the sole organism capable of partially degrading TCEP (35% removal). The other chlorinated compound, TCPP, was more easily degraded and 70% of its main isomer was removed by T. versicolor. However, chlorinated compounds were only partially degraded under nutrient-limiting conditions. TEP was either not degraded or poorly degraded, and it is likely that it is a transformation product from another OPFR’s degradation. These results suggest that degradation of chlorinated compounds is dependent on the concentration of the main carbon source and that more polar OPFRs are less susceptible to degradation, given that they are less accessible to radical removal by fungi. Overall, the findings of the present study pave the way for further planned research and a potential application for the degradation of these contaminants in real wastewaters.Graphical

Comparative study of degradation of pharmaceutical and personal care products in wastewater by advanced oxidation processes: Fenton, UV/H2O2, UV/TiO2

AbstractIn conventional wastewater treatment plants, micropollutants mix with the aquatic environment because they cannot be removed entirely due to their nonbiodegradable structure. Advanced oxidation processes can be considered an alternative solution to this problem. In this study, five different pharmaceutical and personal care products, carbamazepine, diclofenac, ibuprofen, paracetamol, and triclosan, which are commonly found in aquatic environments, were selected as target pollutants. The removal of these target pollutants was investigated using advanced oxidation methods such as the Fenton and UV processes (UV, UV/H2O2, and UV/TiO2). The feasibility of processes in terms of cost was investigated. In the study, both initial and final pharmaceutical concentrations were measured using liquid chromatography mass spectrometry/mass spectrometry to accurately calculate removal efficiency. It has been determined that processes other than the UV process have removal efficiency >99.9%. The UV process showed removal efficiency of 40% for carbamazepine, 90% for diclofenac, 85% for ibuprofen, 86% for paracetamol and 85% for triclosan. Among the processes with high removal efficiency, the Fenton process has been integrated into wastewater treatment plants and has been shown to be the most suitable system in terms of both performance and cost in solving the micropollutant problem.

Effect of FeCl3 concentration in chemically enhanced primary treatment on the performance of a conventional wastewater treatment plant. A case study

The effect of coagulant dosage in a chemically enhanced primary treatment (CEPT) on the performance of a conventional wastewater treatment plant (WWTP) has been investigated. Lab-scale experiments simulations were carried out in order to evaluate the effect of coagulant addition on the primary settling performance. In these experiments, FeCl3 was used as coagulant. Later, the WWTP was theoretically simulated using a commercial software (WEST®) to evaluate the effect of coagulation/flocculation on the global system, based on the results obtained at lab-scale. According to these results, the CEPT modifies the organic matter balance in the WWTP, decreasing the contribution of readily (SS) and slowly (XS) biodegradable fractions of COD to the aerobic biological process up to 27.3% and 80.8%, respectively, for a dosage of FeCl3 of 24 mg L−1. Consequently, total suspended solids in the aerobic reactor and the secondary purged sludge decreased up to 33% and 13%, respectively. However, the influence on effluent quality was negligible. On the contrary, suspended solids concentration in the sludge to be treated by anaerobic digestion increased, mainly regarding the Ss and Xs fractions, which caused an 8.1% increase in biogas production potential, with approximately 60% of CH4 concentration.

Efficiency of fenton oxidation and membrane hybrid processes for paracetamol removal in seawater

Traces of Paracetamol (PCT) as a micropollutant in the environment, particularly in seawater (SW), have become a global concern in recent years due to the toxicity effect on humans and environment. Due to special characteristics, conventional wastewater treatment plants are able to degrade PCT partially. Therefore, an alternative treatment was necessary to treat PCT substance. Homogeneous Fenton oxidation is an efficient process to degrade PCT at various levels. Nevertheless, separation of dissolved iron by-products in the effluent caused a problem. Combination of Fenton oxidation and ultrafiltration treatment presents a promising opportunity as one of the alternative treatments for PCT removal across aqueous matrices and removal of iron residue. Despite promising, information related to combine Fenton and membrane process was lacking. Therefore, this study aims to evaluate the efficiency of the hybrid processes to remove PCT, represented in Chemical Oxygen Demand (COD), for both distilled water (DW) and seawater. In this study, crucial parameter Fenton’s reagent with H2O2/Fe2+ ratio (w/w) was observed. In the DW matrix, optimal 1:0.5 ratio resulted 45% COD removal, whereas 1 :1 ratio exhibited 37% COD removal in SW. Flat sheet Polyethersulfone (PES) with pore size of 30 nm and 7 nm (50 kDa) membrane was employed with a constant flux of 120 L/m²·h. A lack of contribution of COD removal in DW and 37% in SW was observed during the ultrafiltration process, respectively. Furthermore, 54% and 92% removal of Fe2+ residue was observed during ultrafiltration at adjusted pH 8.5 in both water matrices using different membrane pore sizes, respectively.

Ibuprofen as an Emerging Contaminant of Concern: Occurrence in Southeast Asia Water Environment

Ibuprofen is the third most salable pharmaceutical worldwide even being sold in the absence of prescription. This drug is not thoroughly metabolized and excreted into wastewater as an unchanged molecule and its metabolites. Conventional wastewater treatment plants are insufficient to remove ibuprofen, thus this substance ends up in the effluent of wastewater treatment systems and pollutes water bodies, soil, and other ecosystems. As an emerging contaminant, continuous discharge of ibuprofen has become a threat to the aquatic environment. However, studies of ibuprofen are predominantly concentrated in developed regions. The current status of ibuprofen in developing countries such as Southeast Asia region is unclear. This review aims to inform the current status of ibuprofen research in Southeast Asian countries, particularly focusing on the occurrence in the aquatic environment. This study would fill a considerable knowledge gap on ibuprofen in Southeast Asia and contribute to global knowledge development, including the need for future studies on issues unique to the region.