Conventional SELEX Research Articles

Establishment of the rapid electrochemical-SELEX monitoring system by using ACEF technique and its application to dengue virus aptasensor fabrication

Aptamers, which consist of single-stranded DNA or RNA, possess considerable potential as biomolecular recognition elements. The systematic evolution of ligands by exponential enrichment (SELEX) serves as a general method for synthesizing aptamers. However, the conventional SELEX process for monitoring aptamer-target binding is time-consuming and labor-intensive, highlighting the need for rapid monitoring and selection methods. To address this problem, this study introduces a novel approach called rapid electrochemical-SELEX (RE-SELEX) monitoring method, which significantly reduces the target-aptamer binding time from 3 h to 10 min. This process is achieved by employing an alternating current electrothermal flow (ACEF) technique. The Au micro gap-type electrode was used to RE-SELEX monitoring device. As a proof-concept of this method, the dengue virus (DENV) aptamers were synthesized. For confirming the feasibility of this DENV aptamer, we analyzed target binding of produced aptamers test including gel electrophoresis, dissociation constant analysis. Then, two aptamers were selected for constructing the rapid electrochemical DENV aptasensor. The RE biosensor was achieved by ACEF technique that reduce the target-aptamer binding within 10 min. The fabricated device can detect 37 fM of the target dengue envelope protein in diluted human serum well. Thus, the proposed method provides a reliable SELEX-monitoring method for the rapid synthesis of aptamers using a simple electrochemical platform.

Rapid Nuclease-Assisted Selection of High-Affinity Small-Molecule Aptamers.

Aptamers are nucleic acid bioreceptors that have been widely utilized for a variety of biosensing applications, including in vivo detection methods that would not be possible with antibody-based systems. However, it remains challenging to generate high-quality aptamers for small molecule targets, particularly for use under physiological conditions. We present a highly effective aptamer selection technology for small-molecule targets that utilizes the nuclease EcoRI to remove nonspecific or weakly binding sequences in solution phase, rapidly enriching high-affinity target binders within just a few rounds of selection. As proof-of-concept, we used our nuclease-assisted SELEX (NA-SELEX) method to isolate aptamers for a synthetic cannabinoid, AB-FUBINACA. Within five rounds, we identified two highly specific aptamers that exhibit nanomolar affinity at physiological temperature. We also demonstrate the robustness and reproducibility of NA-SELEX by performing the same selection experiment with fresh reagents and libraries, obtaining the same two aptamers as well as two other high-quality aptamer candidates. Finally, we compare NA-SELEX against a conventional library-immobilized SELEX screen for AB-FUBINACA using the same screening conditions, identifying aptamers with 25-100-fold weaker affinity after 11 rounds of selection. NA-SELEX therefore could be an effective selection method for the isolation of high-quality aptamers for small-molecule targets.

In silico selection of aptamers against SARS-CoV-2.

Aptamers are molecular recognition elements that have been extensively deployed in a wide array of applications ranging from diagnostics to therapeutics. Due to their unique properties as compared to antibodies, aptamers were also largely isolated during the COVID-19 pandemic for multiple purposes. Typically generated by conventional SELEX, the inherent drawbacks of the process including the time-consuming, cumbersome and resource-intensive nature catalysed the move to adopt in silico approaches to isolate aptamers. Impressive performances of these in silico-derived aptamers in their respective assays have been documented thus far, bearing testimony to the huge potential of the in silico approaches, akin to the traditional SELEX in isolating aptamers. In this study, we provide an overview of the in silico selection of aptamers against SARS-CoV-2 by providing insights into the basic steps involved, which comprise the selection of the initial single-stranded nucleic acids, determination of the secondary and tertiary structures and in silico approaches that include both rigid docking and molecular dynamics simulations. The different approaches involving aptamers against SARS-CoV-2 were illuminated and the need to verify these aptamers by experimental validation was also emphasized. Cognizant of the need to continuously improve aptamers, the strategies embraced thus far for post-in silico selection modifications were enumerated. Shedding light on the steps involved in the in silico selection can set the stage for further improvisation to augment the functionalities of the aptamers in the future.

Aptamer Nanoconstructs Crossing Human Blood-Brain Barrier Discovered via Microphysiological System-Based SELEX Technology.

Blood-brain barrier (BBB) remains one of the critical challenges in developing neurological therapeutics. Short single-stranded DNA/RNA nucleotides forming a three-dimensional structure, called aptamers, have received increasing attention as BBB shuttles for efficient brain drug delivery owing to their practical advantages over Trojan horse antibodies or peptides. Aptamers are typically obtained by combinatorial chemical technology, termed Systemic Evolution of Ligands by EXponential Enrichment (SELEX), against purified targets, living cells, or animal models. However, identifying reliable BBB-penetrating aptamers that perform efficiently under human physiological conditions has been challenging because of the poor physiological relevance in the conventional SELEX process. Here, we report a human BBB shuttle aptamer (hBS) identified using a human microphysiological system (MPS)-based SELEX (MPS-SELEX) method. A two-channel MPS lined with human brain microvascular endothelial cells (BMECs) interfaced with astrocytes and pericytes, recapitulating high-level barrier function of in vivo BBB, was exploited as a screening platform. The MPS-SELEX procedure enabled robust function-based screening of the hBS candidates, which was not achievable in traditional in vitro BBB models. The identified aptamer (hBS01) through five-round of MPS-SELEX exhibited high capability to transport protein cargoes across the human BBB via clathrin-mediated endocytosis and enhanced uptake efficiency in BMECs and brain cells. The enhanced targeting specificity of hBS01 was further validated both in vitro and in vivo, confirming its powerful brain accumulation efficiency. These findings demonstrate that MPS-SELEX has potential in the discovery of aptamers with high target specificity that can be widely utilized to boost the development of drug delivery strategies.

In-silico selection employing rigiddocking and moleculardynamic simulation in selecting DNA aptamers against androgen receptor.

Aptamers are a class of single-stranded (ss) nucleic acid molecules generated through Systematic Evolution of Ligands by Exponential Enrichment (SELEX) that involves iterations of time-consuming and tedious selection, amplification, and enrichment steps. To compensate for the drawbacks of conventional SELEX, we have devised an in-silico methodology that facilitates a cost-effective and facile manner of aptamer selection. Here, we report the isolation of DNA aptamers against androgen receptors (ARs) using androgen response elements (ARE) that possess natural affinity toward AR. A virtual library of ARE sequences was prepared and subjected to a stringent selection criterion to generate a sequence pool having stable hairpin conformationsandhighGCcontent. The 3D-structures of the selected ss AREs were modeled and screened through rigid docking and molecular dynamic (MD) simulation to examine their potency as potential AR binders. The predicted sequences were further validated using direct enzyme-linked aptasorbent assay (ELASA),whichincludesthemeasurementoftheir binding affinity, specificity, and target discrimination properties under complex biological enviroments. A short, 15 nucleotides (nts), ssDNA aptamer,termedARapt1withtheestimatedKdvalueof5.5±3nm, was chosen as the mostprominent aptamer against AR based on the coherence of both the in-silico and in-vitro evaluation results. The high target-binding affinity and selectivity of ARapt1 signify its potential use as a versatile tool in diagnostic applications relevant to prostate cancer and related diseases.

A modified SELEX approach to identify DNA aptamers with binding specificity to the major histocompatibility complex presenting ovalbumin model antigen.

Aptamers have sparked significant interest in cell recognition because of their superior binding specificity and biocompatibility. Cell recognition can be mediated by targeting the major histocompatibility complex (MHC) that presents short peptides derived from intracellular antigens. Although numerous antibodies have demonstrated a specific affinity for the peptide-MHC complex, the number of aptamers that exhibit comparable characteristics is limited. Aptamers are usually selected from large libraries via the Systemic Evolution of Ligands by Exponential Enrichment (SELEX), an iterative process of selection and PCR amplification to enrich a pool of aptamers with high affinity. However, the success rate of aptamer identification is low, possibly due to the presence of complementary sequences or sequences rich in guanine and cytosine that are less accessible for primers. Here, we modified SELEX by employing systemic consecutive selections with minimal PCR amplification. We also modified the analysis by selecting aptamers that were identified in multiple selection rounds rather than those that are highly enriched. Using this approach, we were able to identify two aptamers with binding specificity to cells expressing the ovalbumin alloantigen as a proof of concept. These two aptamers were also discovered among the top 150 abundant candidates, despite not being highly enriched, by performing conventional SELEX. Additionally, we found that highly enriched aptamers tend to contain fractions of the primer sequence and have minimal target affinity. Candidate aptamers are easily missed in the conventional SELEX process. Therefore, our modification for SELEX may facilitate the identification of aptamers for more application in diverse biomedical fields. Significance: we modify the conventional method to improve the efficiency in the identification of the aptamer, a single strand of nucleic acid with binding specificity to the target molecule, showing as a proof of concept that this approach is particularly useful to select aptamers that can selectively bind to cells presenting a particular peptide by the major histocompatibility complex (MHC) on the cell surface. Given that cancer cells may express mutant peptide-MHC complexes that are distinct from those expressed by normal cells, this study sheds light on the potential application of aptamers to cancer cell targeting.

On-chip selection of adenosine aptamer using graphene oxide-coated magnetic nanoparticles.

Systematic evolution of ligands by exponential enrichment (SELEX) is a method that is generally used for developing aptamers, which have arisen the promising alternatives for antibodies. However, conventional SELEX methods have limitations, such as a limited selection of target molecules, time-consuming and complex fabrication processes, and labor-intensive processes, which result in low selection yields. Here, we used (i) graphene oxide (GO)-coated magnetic nanoparticles in the selection process for separation and label-free detection and (ii) a multilayered microfluidic device manufactured using a three-dimensionally printed mold that is equipped with automated control valves to achieve precise fluid flows. The developed on-chip aptamer selection device and GO-coated magnetic nanoparticles were used to screen aptamer candidates for adenosine in eight cycles of the selection process within approximately 2 h for each cycle. Based on results from isothermal titration calorimetry, an aptamer with a dissociation constant of 18.6 ± 1.5 μM was selected. Therefore, the on-chip platform based on GO-coated magnetic nanoparticles provides a novel label-free screening technology for biosensors and micro/nanobiotechnology for achieving high-quality aptamers.

Bio-Layer Interferometry-Based SELEX and Label-Free Detection of Patulin Using Generated Aptamer.

This study reports a novel bio-layer interferometry (BLI)-based SELEX for generation of high affinity aptamers against patulin. Unlike conventional SELEX, the present method enabled real-time monitoring of increasing affinity of the oligonucleotides to the toxin. After seven rounds of selection cycles, the enriched pool of aptamers was characterized by cloning and sequencing and clustered into two families based on similarity. Two sequences, PAT C3 and PAT C4, each belonging to different clades, were further evaluated for their binding affinity. SPR studies determined the dissociation constants (KD) of 8.2 × 10-8 and 1.9 × 10-7 M for aptamer PAT C3 and PAT C4, respectively. The highest affinity PAT C3 aptamer was used to develop a patulin BLI aptasensor, which indicated a linear detection range from 0.045 to 100 ng/mL [limit of detection (LOD) = 0.173 ng/mL; limit of quantification (LOQ) = 0.526 ng/mL]. The aptasensor displayed no cross-reactivity with its structural analogue isopatulin or any of the other mycotoxin groups tested. Spiking studies in simulated apple juice samples showed recoveries in the range of 82.11 to 100.23%, indicating good sensor performance. The study is the first report of BLI-based SELEX for a non-protein toxin, which resulted in the generation of high affinity aptamers and development of an aptasensor which can have wide application in the food industry for high throughput screening of samples for patulin contamination within a short span of time.

Non-SELEX method for aptamer selection against β-casomorphin-7 peptide

The non-systematic evolution of ligands by the exponential enrichment (non-SELEX) method was used in the present study for the selection of β-casomorphin-7 (BCM-7)-specific aptamers. These aptamers were tested to evaluate their ability to detect BCM-7 peptide in the human urine sample. The method did not employ aptamer amplification and counterselection as used in conventional SELEX but included a negative round of selection. The selection was performed in a single day, and after 5 rounds, a total of 16 numbers of aptamer were identified through Sanger sequencing. Newly selected aptamers named sequence ID no. 3 have performed better than other aptamers in detecting the BCM-7 peptide. Sequence ID no. 3 was also compared with previously selected aptamers through the SELEX method and its performance was found to be better than old aptamers. The sensing experiment was tried on different platforms from magnetic beads to the membrane. In each strategy, satisfactory results were obtained with aptamers that recognized BCM-7 spiked in a human urine sample at a very low amount. The non-SELEX method is an easy and time-saving process for aptamer selection. Selection of viable aptamers from a large pool of sequences for sensing experiments is a tedious job; however, an attempt has been made to select aptamers on the basis of In Silico (http://www.unafold.org/, https://bioinformatics.ramapo.edu/QGRS/index.php) information, observing DNA band intensity on agarose gel and colorimetric results obtained on magnetic beads and membrane. These aptamers have the potential in biosensor making for detecting BCM-7 peptide in urine samples of autistic patients.

HT-SELEX-based identification of binding pre-miRNA hairpin-motif for small molecules

Selective targeting of biologically relevant RNAs with small molecules is a long-standing challenge due to the lack of clear understanding of the binding RNA motifs for small molecules. The standard SELEX procedure allows the identification of specific RNA binders (aptamers) for the target of interest. However, more effort is needed to identify and characterize the sequence-structure motifs in the aptamers important for binding to the target. Herein, we described a strategy integrating high-throughput (HT) sequencing with conventional SELEX followed by bioinformatic analysis to identify aptamers with high binding affinity and target specificity to unravel the sequence-structure motifs of pre-miRNA, which is essential for binding to the recently developed new water-soluble small-molecule CMBL3aL. To confirm the fidelity of this approach, we investigated the binding of CMBL3aL to the identified motifs by surface plasmon resonance (SPR) spectroscopy and its potential regulatory activity on dicer-mediated cleavage of the obtained aptamers and endogenous pre-miRNAs comprising the identified motif in its hairpin loop. This new approach would significantly accelerate the identification process of binding sequence-structure motifs of pre-miRNA for the compound of interest and would contribute to increase the spectrum of biomedical application.

The Application of Microfluidic Technologies in Aptamer Selection.

Aptamers are sequences of single-strand oligonucleotides (DNA or RNA) with potential binding capability to specific target molecules, which are increasingly used as agents for analysis, diagnosis, and medical treatment. Aptamers are generated by a selection method named systematic evolution of ligands by exponential enrichment (SELEX). Numerous SELEX methods have been developed for aptamer selections. However, the conventional SELEX methods still suffer from high labor intensity, low operation efficiency, and low success rate. Thus, the applications of aptamer with desired properties are limited. With their advantages of low cost, high speed, and upgraded extent of automation, microfluidic technologies have become promising tools for rapid and high throughput aptamer selection. This paper reviews current progresses of such microfluidic systems for aptamer selection. Comparisons of selection performances with discussions on principles, structure, operations, as well as advantages and limitations of various microfluidic-based aptamer selection methods are provided.

Capillary electrophoresis-based methodology for screening of oligonucleotide aptamers.

As a new molecular recognition element, oligonucleotide aptamer not only has higher affinity and specificity to target molecules, but also has the advantages of wide recognition range, in vitro synthesis and chemical stability compared with conventional antibodies. Since a kind of screening method termed systematic evolution of ligands by exponential enrichment (SELEX) was reported, scientists have extensively researched the methodology of how to highly and efficiently screen out aptamers from a library consisting of a large number of random oligonucleotides. Certainly capillary electrophoresis-based screening methodologies, including nonequilibrium capillary electrophoresis of equilibrium mixtures, equilibrium capillary electrophoresis of equilibrium mixtures, non-SELEX, ideal-filter capillary electrophoresis, capillary transient isotachophoresis, etc., are revolutionary. Compared with conventional SELEX, these capillary electrophoresis-based methodologies show incomparable advantages such as the single-round screening of aptamers and increased successful screening rate. Methodology studies on the screening process of aptamers are comprehensively reviewed.

GOLD SELEX: a novel SELEX approach for the development of high-affinity aptamers against small molecules without residual activity.

GOLD SELEX, a novel SELEX approach has been developed that obviates the need for target immobilization for aptamer development. The approach purely relies on the affinity of the aptamers towards its target, to get detached from the gold nanoparticle (GNP) surface (weak attraction) after binding with its target. Thus, only the completely detached aptamers are selected for the next round of SELEX. This, in-process, also addresses the issue of residual binding and thus improves the sensitivity of the developed aptamers. As a proof of concept for establishing the utility of the approach for small molecules, we have developed aptamers against dichlorvos (DV), a pesticide in just 8 rounds. Using these aptamer candidates, we have developed an aptamer-NanoZyme (GNP having peroxidase mimic activity) based colorimetric assay. The developed aptamer displayed high affinity (Kd in sub micromolar range) and selectivity for DV. The developed assay could detect as low as 15μM DV. The best-performing aptamer was also able to work in real samples like river water and commercial apple juice. The GOLD SELEX approach developed in this study, we believe, can act as a template for future SELEX strategy development and can replace the conventional SELEX strategy.

Biolayer interferometry-SELEX for Shiga toxin antigenic-peptide aptamers & detection via chitosan-WSe2 aptasensor

We report biolayer interferometry based in-vitro selection technique (BLI-SELEX) for fishing out specific aptamers against E. coli Shiga toxin subtypes viz., stx1 & stx2 via epitopic peptides. BLI-SELEX is a one-step technique for rapidly generating aptamers against protein biomarkers in a microtiter plate format, obliterating the need for multiple enrichment rounds to harvest high-affinity aptamers as in conventional SELEX. Two unique aptamers selected against stx1 & stx2 with picomolar Kd (~47 pM & ~29 pM, respectively) were successfully used to fabricate voltammetric diagnostic assay via immobilization onto chitosan exfoliated 2D tungsten diselenide (WSe2) nanosheet platform. These aptamers modified nanosensors showed high sensitivity of ~ 5.0 μA ng-1 mL, a dynamic response range from 50 pg mL-1 to 100 ng mL-1, with a detection limit of 44.5 pg mL-1 & 41.3 pg mL-1 for stx subtypes, respectively and showed low cross-reactivity in spiked urine, serum and milk samples. The synergistic effect of selective aptamers & high sensitivity imparted by 2D transition metal dichalcogenide (TMD) highlights the superior potential of a fabricated nanosensor for bacterial toxin detection.

DNA-Nanoscaffold-Assisted Selection of Femtomolar Bivalent Human α-Thrombin Aptamers with Potent Anticoagulant Activity.

Multivalent aptamers that interact with their target proteins through multiple sites exhibit much stronger binding strengths than their monovalent counterparts. In this work, we have designed a single-stranded DNA (ssDNA) library (1015 molecules, each 145 nt) based on a predefined DNA nanostructure designed to present two random-loop sites for bivalent aptamer evolution. From this library, a group of ultra-strong bivalent aptamers against human α-thrombin (with apparent KD values of ≈340 fm) were easily identified through a simple seven-round conventional systematic evolution of ligands by exponential enrichment (SELEX) procedure. The dominant bivalent aptamers consist of two components, one binding to exosite I and the other to exosite II. The best of these bivalent aptamers show strong allosteric attenuation of the thrombin cleavage activity and also display an extremely potent anticoagulation effect in human plasma, demonstrating their great potential in therapeutic applications. The method developed here can easily be adapted to conventional SELEX techniques, opening a new route for fast selection of multivalent aptamers with superior binding affinity for other targets.

Developing and Characterization of Chemically Modified RNA Aptamers for Targeting Wild Type and Mutated c-KIT Receptor Tyrosine Kinases.

The c-KIT receptor represents an attractive target for cancer therapy. Aptamers are emerging as a new promising class of nucleic acid therapeutics. In this study, a conventional SELEX approach was applied against the kinase domain of a group of c-KIT proteins (c-KITWT, c-KITD816V, and c-KITD816H) to select aptamers from a random RNA pool that can bind to the kinase domain of each target with high affinity and can selectively interfere with their kinase activities. Interestingly, our data indicated that one candidate aptamer, called V15, can specifically inhibit the in vitro kinase activity of mutant c-KITD816V with an IC50 value that is 9-fold more potent than the sunitinib drug tested under the same conditions. Another aptamer, named as H5/V36, showed the potential to distinguish between the c-KIT kinases by modulating the phosphorylation activity of each in a distinct mechanism of action and in a different potency.

Molecular Crowding Evolution for Enabling Discovery of Enthalpy-Driven Aptamers for Robust Biomedical Applications.

An enthalpy-driven ligand is an ideal probe for practical applications because of the formation of abundant specific bonds between the ligand and target, compared to an entropy-driven ligand with a similar Gibbs free energy change. However, there has been a lack of direct discovery strategy for identifying enthalpy-driven ligands. In this work, a molecular crowding SELEX (systematic evolution of ligands by exponential enrichment) strategy for discovering enthalpy-driven aptamers was developed to improve the affinity and selectivity of aptamers in complex samples. Three aptamer sequences were successfully evolved against a tumor biomarker protein, and all proved to be enthalpy-driven by thermodynamics analysis, establishing the feasibility of molecular crowding SELEX for effective discovery of enthalpy-driven aptamers. Further comparison of aptamers evolved from conventional SELEX in buffer and molecular crowding SELEX (SYL-H2C) revealed much higher affinity of SYL-H2C. With its improved thermodynamic properties, the enthalpy-driven SYL-H2C aptamer was able to detect circulating tumor cells in real cancer patient blood samples with excellent detection accuracy (10/10). The proposed molecular crowding screening strategy offers a promising direction for discovering robust binding probes for a great variety of biomedical applications.

Electrochemical SELEX Technique for the Selection of DNA Aptamers against the Small Molecule 11-Deoxycortisol.

Aptamers have received considerable attention due to their numerous advantages as biorecognition receptors. However, the tediousness and high cost of the conventional selection process of aptamers remain major challenges that limit their widespread use. To overcome these limitations, here we designed a new electrochemical SELEX platform that enables a rapid, efficient, and cost-effective enrichment method for the identification of aptamers, particularly against small molecules. The selection platform is based on the immobilization of the target analyte on gold electrodes that leads to improved selection efficiency and enables in situ monitoring of the enriched DNA using square-wave voltammetry. Compared with the conventional SELEX method, this selection protocol avoids the use of beads as a solid matrix and fluorescently labeled DNA, which is usually required for small molecules, thus offering simplified aptamer/target incubation, washing, and elution steps. Moreover, the DNA recovery can be detected by simply measuring the current of the electrodes in a ferro/ferricyanide redox couple. This would eliminate the need for fluorescence labeling, which significantly reduces the cost of the procedure. The approach was successfully applied for the selection of high-affinity aptamers that bind specifically to the small molecule 11-deoxycortisol hormone using eight rounds. One of the selected aptamers that showed a dissociation constant at the subnanomolar level was used to construct a competitive voltammetric aptasensor exhibiting high sensitivity, selectivity against other steroid analogues, and possible applicability in serum samples. Thus this SELEX approach offers great promise for a faster, simpler, and more economic aptamer identification method for various targets including small molecules for a wide variety of applications.

High Enrichment of Nucleobase-modified Aptamers in Early Selection Rounds by Microbeads-assisted Capillary Electrophoresis SELEX.

Nucleobase-modified aptamers are attractive candidates for diagnostic and therapeutic agents due to the high affinity, stability and functionality. However, since even conventional SELEX requires many selection rounds, acquisition of modified aptamers is much more laborious. Herein, microbeads-assisted capillary electrophoresis (MACE)-SELEX was applied against thrombin using the indole-modified DNA library. After only three selection rounds, we successfully enriched the modified aptamers and they showed slower off-rate than reported aptamers, suggesting MACE-SELEX is a promising approach for rapid identification of modified aptamers.

Simple Methods and Rational Design for Enhancing Aptamer Sensitivity and Specificity.

Aptamers are structured nucleic acid molecules that can bind to their targets with high affinity and specificity. However, conventional SELEX (Systematic Evolution of Ligands by EXponential enrichment) methods may not necessarily produce aptamers of desired affinity and specificity. Thus, to address these questions, this perspective is intended to suggest some approaches and tips along with novel selection methods to enhance evolution of aptamers. This perspective covers latest novel innovations as well as a broad range of well-established approaches to improve the individual binding parameters (aptamer affinity, avidity, specificity and/or selectivity) of aptamers during and/or post-SELEX. The advantages and limitations of individual aptamer selection methods and post-SELEX optimizations, along with rational approaches to overcome these limitations are elucidated in each case. Further the impact of chosen selection milieus, linker-systems, aptamer cocktails and detection modules utilized in conjunction with target-specific aptamers, on the overall assay performance are discussed in detail, each with its own advantages and limitations. The simple variations suggested are easily available for facile implementation during and/or post-SELEX to develop ultrasensitive and specific assays. Finally, success studies of established aptamer-based assays are discussed, highlighting how they utilized some of the suggested methodologies to develop commercially successful point-of-care diagnostic assays.