Conventional Pipeline Research Articles

Enhanced slurry transport efficiency and energy reduction through swirl-inducing pipes

Tailings are the waste material left after “mineral values” have been extracted from the ore. Proper tailings disposal should be economical and environmentally safe. This study reports significant increase in energy efficiency during hydro-transport of zinc tailings by integrating a swirl-motion-inducing pipe segment into the conventional pipeline. The computational model was rigorously tested against available experimental data on standard pipes. The zinc tailings slurry used has a wide particle size distribution, represented by multiple size classes, each having representative size and concentration. The study found that adding swirl-inducing pipe section to the conventional pipeline decreased specific energy consumption (SEC) by up to 35 % for transporting settling slurry, especially at moderate to high solids concentrations. Among the various configurations tested, the pipeline with a 10-lobed swirl-inducing segment achieved the lowest SEC across the operating conditions considered. These findings highlight the potential of swirl-inducing segments in improving energy efficiency for slurry transport.

Experimental investigation on the restart characterization of shale oil-water flow in a horizontal pipe

ABSTRACT With the dwindling conventional oil resources and increasing energy demand, shale oil development has gradually become a hot spot in the global energy industry. Moreover, the shale oil pipeline also inevitably experiences abnormal operations, such as shutdown and restart during regular maintenance or emergency accident repairs. However, previous restart research primarily focused on conventional crude oil pipelines, and there is still a research gap on shale oil-water flow. Therefore, this work conducted the shale oil-water restart flow experiment in the multi-test section pipe flow loop, considering the temperature (20–50℃), starting frequency (15–25 hz), and water content (0–80%). Based on the restart pressure and volume flow rate change, the response characteristics of start pressure are studied. Moreover, the changing rules of restart pressure are explored with starting frequency, temperature, and water content. Eventually, the variation trend of the restart pressure absolute errors between the calculated value and the experimental data with the starting frequency is analyzed. The results show that the restart pressure reaches the maximum around 10 s after the pump starts, and the maximum restart pressure is approximately 1.5 times the stabilized restart pressure. Moreover, the restart pressure increases linearly with the starting frequency and decays exponentially with the temperature and water content (after the inversion point). With the starting frequency reduced from 45 hz to 15 hz, the restart pressure reduces from 24.6 kPa to 10.0 kPa at 20°C. Furthermore, the empirical formulas can predict the starting pressure at low frequencies. This research lays a theoretical foundation for the safe restart of shale oil-water flow.

Gas adsorption meets geometric deep learning: points, set and match

Thanks to their unique properties such as ultra high porosity and surface area, metal-organic frameworks (MOFs) are highly regarded materials for gas adsorption applications. However, their combinatorial nature results in a vast chemical space, precluding its exploration with traditional techniques. Recently, machine learning (ML) pipelines have been established as the go-to method for large scale screening by means of predictive models. These are typically built in a descriptor-based manner, meaning that the structure must be first coarse-grained into a 1D fingerprint before it is fed to the ML algorithm. As such, the latter can not fully exploit the 3D structural information, potentially resulting in a model of lower quality. In this work, we propose a descriptor-free framework called “AIdsorb”, which can directly process raw structural information for predicting gas adsorption properties. To accomplish that, the structure is first treated as a point cloud and then passed to a deep learning algorithm suitable for point cloud analysis. As a proof of concept, AIdsorb is applied for predicting CO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ ext {CO}_{2}$$\\end{document} uptake in MOFs, outperforming a conventional pipeline that uses geometric descriptors as input. Additionally, to evaluate the transferability of the proposed framework to different host-guest systems, CH4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ ext {CH}_{4}$$\\end{document} uptake in COFs is examined. Since AIdsorb bases its roots on raw structural information, its applicability extends to all fields of material science.

Probabilistic 3D Correspondence Prediction from Sparse Unsegmented Images.

The study of physiology demonstrates that the form (shape) of anatomical structures dictates their functions, and analyzing the form of anatomies plays a crucial role in clinical research. Statistical shape modeling (SSM) is a widely used tool for quantitative analysis of forms of anatomies, aiding in characterizing and identifying differences within a population of subjects. Despite its utility, the conventional SSM construction pipeline is often complex and time-consuming. Additionally, reliance on linearity assumptions further limits the model from capturing clinically relevant variations. Recent advancements in deep learning solutions enable the direct inference of SSM from unsegmented medical images, streamlining the process and improving accessibility. However, the new methods of SSM from images do not adequately account for situations where the imaging data quality is poor or where only sparse information is available. Moreover, quantifying aleatoric uncertainty, which represents inherent data variability, is crucial in deploying deep learning for clinical tasks to ensure reliable model predictions and robust decision-making, especially in challenging imaging conditions. Therefore, we propose SPI-CorrNet, a unified model that predicts 3D correspondences from sparse imaging data. It leverages a teacher network to regularize feature learning and quantifies data-dependent aleatoric uncertainty by adapting the network to predict intrinsic input variances. Experiments on the LGE MRI left atrium dataset and Abdomen CT-1K liver datasets demonstrate that our technique enhances the accuracy and robustness of sparse image-driven SSM.

Optimizing large-scale CO2 pipeline networks using a geospatial splitting approach

CO2 transport infrastructure is the backbone of carbon capture and storage (CCS) technology for the mitigation of carbon emissions and project deployment viability. In conventional large-scale CO2 pipeline network designs, the storage sites are generally assumed as the centroids of the major geologic basins, however, this approach might provide suboptimal solutions since the large extension of some storage formations significantly increases the length of the CO2 transportation networks. To address this situation and obtain optimal pipeline routes, we present a novel geospatial splitting framework that partitions large basins into multiple sub-sinks. In our approach, we used a large number of reservoir models varying petrophysical properties and CO2 injection rates to compute pressure plumes through numerical simulations, leading to the calculation of the number of subregions for each basin as a function of the extension of pressure interference areas and boundaries. Finally, we applied K-means clustering and Voronoi polygon algorithms to partition large basins into subregions and obtain their sink coordinates. To demonstrate the capability of the developed workflow, we investigated two CO2 pipeline network modeling case studies using our splitting approach: one regional case study focusing on the Intermountain West (I-West) region and one nationwide case study covering the lower 48 states in the U.S. In both case studies, we compared the optimal pipeline routes using the original and new storage locations and examined the major differences. The use of the developed geospatial approach resulted in both cases in a shortening of the total pipeline network length by 13% and 10%, compared to the pipeline modeling with the original basins, leading to cost reductions of 25% and 17%, respectively, demonstrating that the location of point sinks has a critical impact on the length and expenses of pipelines to efficiently transport CO2 to distant storage sites. Therefore, the workflow presented here contributes to the proper and realistic modeling of case studies that support decision-making in CCS deployment.

Progress in spontaneous ignition of hydrogen during high-pressure leakage with the considerations of pipeline storage and delivery

High-pressure pipeline storage presents a promising method for widespread and efficient hydrogen transfer. However, challenges arise in mitigating pressurized hydrogen leakage due to hydrogen embrittlement issues associated with conventional pipeline materials. Experimental findings indicate that pressurized hydrogen is prone to spontaneous combustion, even at relief pressures as low as approximately 2 MPa - well below the permissible pipeline pressure in most countries. Despite this, there remains a lack of consensus regarding the mechanism of spontaneous ignition from high-pressure hydrogen leakage, and current research in this area is deemed insufficient. This study aims to analyze and discuss the presumed mechanisms of spontaneous ignition comparatively, review the progress in the study of spontaneous ignition of hydrogen in high-pressure leakage based on diffusion ignition theory, and statistically compare and discuss the influences of significant factors existing in pipelines (e.g., macro size factors and internal structure) and/or pipe failures (e.g., rupture factors) on spontaneous ignition. It is hoped that this article will provide scholars involved in the development of hydrogen energy and the theories of spontaneous combustion with a systematic understanding of these phenomena.

Clinical trials in-a-dish for cardiovascular medicine.

Cardiovascular diseases persist as a global health challenge that requires methodological innovation for effective drug development. Conventional pipelines relying on animal models suffer from high failure rates due to significant interspecies variation between humans and animal models. In response, the recently enacted Food and Drug Administration Modernization Act 2.0 encourages alternative approaches including induced pluripotent stem cells (iPSCs). Human iPSCs provide a patient-specific, precise, and screenable platform for drug testing, paving the way for cardiovascular precision medicine. This review discusses milestones in iPSC differentiation and their applications from disease modelling to drug discovery in cardiovascular medicine. It then explores challenges and emerging opportunities for the implementation of 'clinical trials in-a-dish'. Concluding, this review proposes a framework for future clinical trial design with strategic incorporations of iPSC technology, microphysiological systems, clinical pan-omics, and artificial intelligence to improve success rates and advance cardiovascular healthcare.

VQ-NeRF: Neural Reflectance Decomposition and Editing With Vector Quantization.

We propose VQ-NeRF, a two-branch neural network model that incorporates Vector Quantization (VQ) to decompose and edit reflectance fields in 3D scenes. Conventional neural reflectance fields use only continuous representations to model 3D scenes, despite the fact that objects are typically composed of discrete materials in reality. This lack of discretization can result in noisy material decomposition and complicated material editing. To address these limitations, our model consists of a continuous branch and a discrete branch. The continuous branch follows the conventional pipeline to predict decomposed materials, while the discrete branch uses the VQ mechanism to quantize continuous materials into individual ones. By discretizing the materials, our model can reduce noise in the decomposition process and generate a segmentation map of discrete materials. Specific materials can be easily selected for further editing by clicking on the corresponding area of the segmentation outcomes. Additionally, we propose a dropout-based VQ codeword ranking strategy to predict the number of materials in a scene, which reduces redundancy in the material segmentation process. To improve usability, we also develop an interactive interface to further assist material editing. We evaluate our model on both computer-generated and real-world scenes, demonstrating its superior performance. To the best of our knowledge, our model is the first to enable discrete material editing in 3D scenes.

CViewer: a Java-based statistical framework for integration of shotgun metagenomics with other omics datasets

BackgroundShotgun metagenomics for microbial community survey recovers enormous amount of information for microbial genomes that include their abundances, taxonomic, and phylogenetic information, as well as their genomic makeup, the latter of which then helps retrieve their function based on annotated gene products, mRNA, protein, and metabolites. Within the context of a specific hypothesis, additional modalities are often included, to give host-microbiome interaction. For example, in human-associated microbiome projects, it has become increasingly common to include host immunology through flow cytometry. Whilst there are plenty of software approaches available, some that utilize marker-based and assembly-based approaches, for downstream statistical analyses, there is still a dearth of statistical tools that help consolidate all such information in a single platform. By virtue of stringent computational requirements, the statistical workflow is often passive with limited visual exploration.ResultsIn this study, we have developed a Java-based statistical framework (https://github.com/KociOrges/cviewer) to explore shotgun metagenomics data, which integrates seamlessly with conventional pipelines and offers exploratory as well as hypothesis-driven analyses. The end product is a highly interactive toolkit with a multiple document interface, which makes it easier for a person without specialized knowledge to perform analysis of multiomics datasets and unravel biologically relevant patterns. We have designed algorithms based on frequently used numerical ecology and machine learning principles, with value-driven from integrated omics tools which not only find correlations amongst different datasets but also provide discrimination based on case–control relationships.ConclusionsCViewer was used to analyse two distinct metagenomic datasets with varying complexities. These include a dietary intervention study to understand Crohn’s disease changes during a dietary treatment to include remission, as well as a gut microbiome profile for an obesity dataset comparing subjects who suffer from obesity of different aetiologies and against controls who were lean. Complete analyses of both studies in CViewer then provide very powerful mechanistic insights that corroborate with the published literature and demonstrate its full potential.EDLr-6-tH-9CdVCxoa6z_8Video

RDLR: A Robust Deep Learning-Based Image Registration Method for Pediatric Retinal Images.

Retinal diseases stand as a primary cause of childhood blindness. Analyzing the progression of these diseases requires close attention to lesion morphology and spatial information. Standard image registration methods fail to accurately reconstruct pediatric fundus images containing significant distortion and blurring. To address this challenge, we proposed a robust deep learning-based image registration method (RDLR). The method consisted of two modules: registration module (RM) and panoramic view module (PVM). RM effectively integrated global and local feature information and learned prior information related to the orientation of images. PVM was capable of reconstructing spatial information in panoramic images. Furthermore, as the registration model was trained on over 280,000 pediatric fundus images, we introduced a registration annotation automatic generation process coupled with a quality control module to ensure the reliability of training data. We compared the performance of RDLR to the other methods, including conventional registration pipeline (CRP), voxel morph (WM), generalizable image matcher (GIM), and self-supervised techniques (SS). RDLR achieved significantly higher registration accuracy (average Dice score of 0.948) than the other methods (ranging from 0.491 to 0.802). The resulting panoramic retinal maps reconstructed by RDLR also demonstrated substantially higher fidelity (average Dice score of 0.960) compared to the other methods (ranging from 0.720 to 0.783). Overall, the proposed method addressed key challenges in pediatric retinal imaging, providing an effective solution to enhance disease diagnosis. Our source code is available at https://github.com/wuwusky/RobustDeepLeraningRegistration .

Analyze of pipeline transport characteristics and optimization method of structural parameters in slurry shield circulation system with spiral structure

This study introduces the application of a spiral structure in pipeline transportation to enhance the pipeline capacity of a slurry shield circulation system. A numerical model of solid–fluid coupling in a pipeline with a double spiral structure was established based on computational fluid dynamics and the discrete element method (CFD–DEM) theory, and its validity was confirmed through comparison with experimental data. The characteristics of the spiral pipeline were evaluated by comparing them with those of a conventional smooth straight pipeline. A multi-objective optimization method for determining the structural parameters of a spiral pipeline in a slurry shield circulation system is proposed using the Kriging surrogate model. The optimized design of a spiral pipeline was demonstrated through a specific project, and the impact of the main structural parameters on the slurry transport characteristics of the pipeline was analyzed. The results indicated that the optimized structural parameters led to an 18.65% increase in the average flow rate of the slurry and a 19.13% reduction in the accumulation of stones in the pipeline.

A Comparative Review on Enhancing Visual Simultaneous Localization and Mapping with Deep Semantic Segmentation.

Visual simultaneous localization and mapping (VSLAM) enhances the navigation of autonomous agents in unfamiliar environments by progressively constructing maps and estimating poses. However, conventional VSLAM pipelines often exhibited degraded performance in dynamic environments featuring mobile objects. Recent research in deep learning led to notable progress in semantic segmentation, which involves assigning semantic labels to image pixels. The integration of semantic segmentation into VSLAM can effectively differentiate between static and dynamic elements in intricate scenes. This paper provided a comprehensive comparative review on leveraging semantic segmentation to improve major components of VSLAM, including visual odometry, loop closure detection, and environmental mapping. Key principles and methods for both traditional VSLAM and deep semantic segmentation were introduced. This paper presented an overview and comparative analysis of the technical implementations of semantic integration across various modules of the VSLAM pipeline. Furthermore, it examined the features and potential use cases associated with the fusion of VSLAM and semantics. It was found that the existing VSLAM model continued to face challenges related to computational complexity. Promising future research directions were identified, including efficient model design, multimodal fusion, online adaptation, dynamic scene reconstruction, and end-to-end joint optimization. This review shed light on the emerging paradigm of semantic VSLAM and how deep learning-enabled semantic reasoning could unlock new capabilities for autonomous intelligent systems to operate reliably in the real world.

Deep-FG-DSM: Fine-Grained DSM for High-resolution UAV Imagery Based on Deep Implicit Occupancy Networks

Abstract. Nowadays, DSM (Digital Surface Model) is one of most important products that has been widely applied in digital city or smart city. Over the last decades, the common way is to follow the conventional photogrammetric pipeline for generating DSM, which is often not efficient and yields noise with small geometric details lost. Inspired by the development of deep implicit occupancy network, in this paper, we presented a learning-based method for obtaining fine-grained DSM, i.e., fine Deep-FG-DSM. In particular, high-resolution UAV imagery together with the corresponding original point cloud are employed to improve DSMs preserving higher details, two heads that embed the features of images and 3D points are deployed, and a MLP (Muti-layer Perceptron) is appended to decode these embedding into continuous occupancy probabilities for predicting the existence (or not) of surface point. Our experimental results demonstrate the robustness of our model against both sparse and noisy point clouds. While generating DSMs, it retains high-frequency details from high-resolution UAV images while maintaining relatively high accuracy. For point cloud obtained after simplification with average sampling resolution of d=5m, the MAE (Mean Absolute Residual Error) is 2.15m.

Study of Activation Energy for Viscous Flow of Mixtures as a Measure of Dilution Efficiency for Heavy Oil-Diluent Systems

As the demand for crude oil continues to increase in response to the continued global needs for it, the development of unconventional crude oil reserves is the only way to sustain global supply. However, the excessively higher viscosity of heavy crude oil makes it less attractive for conventional pipeline transportation. Therefore, reducing the viscosity of heavy crude oil to meet crude oil transporting pipeline regulations is a necessity. This paper has assessed the dilution efficiency of well-known diluents in the petroleum industry, using different dilution ratios based on a thermodynamic approach involving activation energy and heat of vaporization determination. Based on selected dilution ratios, kinematic viscosities of binary and ternary systems of toluene and natural gas condensate as diluents, and Saudi Heavy crude oil as the base oil were measured, using anticipated field based temperatures reported in the literature, which facilitated the experimental approach. The study shows that although the ternary systems have the lowest activation energy for viscous flow and heat of vaporization in accordance with the thermal activation theory of viscous flow, natural gas condensate binary systems have the lowest cost of transportation per barrel of total fluid in the transporting pipeline. The study further shows that the binary systems for toluene and Saudi Heavy crude oil have higher activation energy for viscous flowed compared to the toluene systems.

Laryngeal surface reconstructions from monocular endoscopic videos: a structure from motion pipeline for periodic deformations.

Surface reconstructions from laryngoscopic videos have the potential to assist clinicians in diagnosing, quantifying, and monitoring airway diseases using minimally invasive techniques. However, tissue movements and deformations make these reconstructions challenging using conventional pipelines. To facilitate such reconstructions, we developed video frame pre-filtering and featureless dense matching steps to enhance the Alicevision Meshroom SfM pipeline. Time and the anterior glottic angle were used to approximate the rigid state of the airway and to collect frames with different camera poses. Featureless dense matches were tracked with a correspondence transformer across subsets of images to extract matched points that could be used to estimate the point cloud and reconstructed surface. The proposed pipeline was tested on a simulated dataset under various conditions like illumination and resolution as well as real laryngoscopic videos. Our pipeline was able to reconstruct the laryngeal region based on 4, 8, and 16 images obtained from simulated and real patient exams. The pipeline was robust to sparse inputs, blur, and extreme lighting conditions, unlike the Meshroom pipeline which failed to produce a point cloud for 6 of 15 simulated datasets. The pre-filtering and featureless dense matching modules specialize the conventional SfM pipeline to handle the challenging laryngoscopic examinations, directly from patient videos. These 3D visualizations have the potential to improve spatial understanding of airway conditions.

Discovery of potent inhibitors of α-synuclein aggregation using structure-based iterative learning.

Machine learning methods hold the promise to reduce the costs and the failure rates of conventional drug discovery pipelines. This issue is especially pressing for neurodegenerative diseases, where the development of disease-modifying drugs has been particularly challenging. To address this problem, we describe here a machine learning approach to identify small molecule inhibitors of α-synuclein aggregation, a process implicated in Parkinson's disease and other synucleinopathies. Because the proliferation of α-synuclein aggregates takes place through autocatalytic secondary nucleation, we aim to identify compounds that bind the catalytic sites on the surface of the aggregates. To achieve this goal, we use structure-based machine learning in an iterative manner to first identify and then progressively optimize secondary nucleation inhibitors. Our results demonstrate that this approach leads to the facile identification of compounds two orders of magnitude more potent than previously reported ones.

Deep learning-based reconstruction enhances image quality and improves diagnosis in magnetic resonance imaging of the shoulder joint.

Accelerated magnetic resonance imaging sequences reconstructed using the vendor-provided Recon deep learning algorithm (DL-MRI) were found to be more likely than conventional magnetic resonance imaging (MRI) sequences to detect subacromial (SbA) bursal thickening. However, the extent of this thickening was not extensively explored. This study aimed to compare the image quality of DL-MRI with conventional MRI sequences reconstructed via conventional pipelines (Conventional-MRI) for shoulder examinations and evaluate the effectiveness of DL-MRI in accurately demonstrating the degree of SbA bursal and subcoracoid (SC) bursal thickening. This prospective cross-sectional study enrolled 41 patients with chronic shoulder pain who underwent 3-T MRI (including both Conventional-MRI and accelerated MRI sequences) of the shoulder between December 2022 and April 2023. Each protocol consisted of oblique axial, coronal, and sagittal images, including proton density-weighted imaging (PDWI) with fat suppression (FS) and oblique coronal T1-weighted imaging (T1WI) with FS. The image quality and degree of artifacts were assessed using a 5-point Likert scale for both Conventional-MRI and DL-MRI. Additionally, the degree of SbA and SC bursal thickening, as well as the relative signal-to-noise ratio (rSNR) and relative contrast-to-noise ratio (rCNR) were analyzed using the paired Wilcoxon test. Statistical significance was defined as P<0.05. The utilization of accelerated sequences resulted in a remarkable 54.7% reduction in total scan time. Overall, DL-MRI exhibited superior image quality scores and fewer artifacts compared to Conventional-MRI. Specifically, DL-MRI demonstrated significantly higher measurements of SC bursal thickenings in the oblique sagittal PDWI sequence compared to Conventional-MRI [3.92 (2.83, 5.82) vs. 3.74 (2.92, 5.96) mm, P=0.028]. Moreover, DL-MRI exhibited higher detection of SbA bursal thickenings in the oblique coronal PDWI sequence [2.61 (1.85, 3.46) vs. 2.48 (1.84, 3.25) mm], with a notable trend towards significant differences (P=0.071). Furthermore, the rSNRs of the muscle in DL-MRI images were significantly higher than those in Conventional-MRI images across most sequences (P<0.001). However, the rSNRs of bone on Conventional-MRI of oblique axial and oblique coronal PDWI sequences showed adverse results [oblique axial: 1.000 (1.000, 1.000) vs. 0.444 (0.367, 0.523); and oblique coronal: 1.000 (1.000, 1.000) vs. 0.460 (0.387, 0.631); all P<0.001]. Additionally, all DL-MRI images exhibited significantly greater rSNRs and rCNRs compared to accelerated MRI sequences reconstructed using traditional pipelines (P<0.001). In conclusion, the utilization of DL-MRI enhances image quality and improves diagnostic capabilities, making it a promising alternative to Conventional-MRI for shoulder imaging.

EPSD: Early Pruning with Self-Distillation for Efficient Model Compression

Neural network compression techniques, such as knowledge distillation (KD) and network pruning, have received increasing attention. Recent work `Prune, then Distill' reveals that a pruned student-friendly teacher network can benefit the performance of KD. However, the conventional teacher-student pipeline, which entails cumbersome pre-training of the teacher and complicated compression steps, makes pruning with KD less efficient. In addition to compressing models, recent compression techniques also emphasize the aspect of efficiency. Early pruning demands significantly less computational cost in comparison to the conventional pruning methods as it does not require a large pre-trained model. Likewise, a special case of KD, known as self-distillation (SD), is more efficient since it requires no pre-training or student-teacher pair selection. This inspires us to collaborate early pruning with SD for efficient model compression. In this work, we propose the framework named Early Pruning with Self-Distillation (EPSD), which identifies and preserves distillable weights in early pruning for a given SD task. EPSD efficiently combines early pruning and self-distillation in a two-step process, maintaining the pruned network's trainability for compression. Instead of a simple combination of pruning and SD, EPSD enables the pruned network to favor SD by keeping more distillable weights before training to ensure better distillation of the pruned network. We demonstrated that EPSD improves the training of pruned networks, supported by visual and quantitative analyses. Our evaluation covered diverse benchmarks (CIFAR-10/100, Tiny-ImageNet, full ImageNet, CUB-200-2011, and Pascal VOC), with EPSD outperforming advanced pruning and SD techniques.

Low-Latency Space-Time Supersampling for Real-Time Rendering

With the rise of real-time rendering and the evolution of display devices, there is a growing demand for post-processing methods that offer high-resolution content in a high frame rate. Existing techniques often suffer from quality and latency issues due to the disjointed treatment of frame supersampling and extrapolation. In this paper, we recognize the shared context and mechanisms between frame supersampling and extrapolation, and present a novel framework, Space-time Supersampling (STSS). By integrating them into a unified framework, STSS can improve the overall quality with lower latency. To implement an efficient architecture, we treat the aliasing and warping holes unified as reshading regions and put forth two key components to compensate the regions, namely Random Reshading Masking (RRM) and Efficient Reshading Module (ERM). Extensive experiments demonstrate that our approach achieves superior visual fidelity compared to state-of-the-art (SOTA) methods. Notably, the performance is achieved within only 4ms, saving up to 75\% of time against the conventional two-stage pipeline that necessitates 17ms.

Incorporating seismic risk assessment into the determination of the optimal route for gas pipelines

ABSTRACT Earthquake-induced damage to gas pipelines can have severe economic, social, and environmental consequences. To mitigate these risks, one effective way is to carefully design the route of gas pipelines, considering the seismic hazard of the region. This paper proposes a methodology that incorporates seismic risk assessment into the process of designing gas pipeline routes. Conventional gas pipeline design methods consider only minimum distances from faults and fail to account for seismic potential. The methodology is applied to three gas pipeline routing problems in the high seismic region of southern Iran. Seismic risk is evaluated using the HAZUS method, and routing is performed through a GIS-based approach. Results are compared with conventional approaches in terms of length, seismic risks, and damage costs, showing the proposed method’s effectiveness in reducing immediate consequences like leaks and breaks in gas transportation. The proposed method reduces seismic damage by 3 to 68% for routing problems.