Controlled Pore Glass Support Research Articles

Template-independent enzymatic synthesis of RNA oligonucleotides.

RNA oligonucleotides have emerged as a powerful therapeutic modality to treat disease, yet current manufacturing methods may not be able to deliver on anticipated future demand. Here, we report the development and optimization of an aqueous-based, template-independent enzymatic RNA oligonucleotide synthesis platform as an alternative to traditional chemical methods. The enzymatic synthesis of RNA oligonucleotides is made possible by controlled incorporation of reversible terminator nucleotides with a common 3'-O-allyl ether blocking group using new CID1 poly(U) polymerase mutant variants. We achieved an average coupling efficiency of 95% and demonstrated ten full cycles of liquid phase synthesis to produce natural and therapeutically relevant modified sequences. We then qualitatively assessed the platform on a solid phase, performing enzymatic synthesis of several N + 5 oligonucleotides on a controlled-pore glass support. Adoption of an aqueous-based process will offer key advantages including the reduction of solvent use and sustainable therapeutic oligonucleotide manufacturing.

An Improved PEG-Linked Solid Support for Minimizing Process-Related Impurities During Solid-Phase Synthesis of DNA and RNA Sequences.

The preparation of controlled pore glass (CPG) supports, functionalized with several hexaethylene glycol spacers, to alleviate the problems associated with the porosity of commercial CPG supports is described in this article. The pore size of CPG restricts the diffusion of reagents to the leader nucleoside embedded in porous supports; this inhibits efficient solid-phase syntheses of DNA and RNA sequences and, by default, the purity of those sequences through formation of a shorter than full-length oligonucleotide. Functionalization of a CPG support with five hexaethylene glycol spacers led to a 42% reduction in process-related impurities contaminating oligonucleotide sequences, compared to that obtained using the commercial long-chain alkylamine (LCAA) CPG support. © 2021 Wiley Periodicals LLC. This article has been contributed to by US Government employees and their work is in the public domain in the USA. Basic Protocol 1: Preparation of the hydroxylated CPG support 3 Basic Protocol 2: Automated preparation of the CPG support 6 Basic Protocol 3: Automated preparation of the poly(hexaethylene glycol)-derived CPG 7 Basic Protocol 4: Automated functionalization of the poly(hexaethylene glycol)-derived CPG support 7 with leader deoxyribo- and ribonucleosides to provide the CPG support 9 Basic Protocol 5: Automated syntheses of DNA and RNA sequences on poly(hexaethylene glycol)-derived CPG support 9 and on a commercial long-chain alkylamine (LCAA) CPG support Support Protocol: Release and deprotection of the DNA and RNA sequences linked to the poly(hexaethylene glycol)-derived CPG support 10 and commercial LCAA-CPG support Basic Protocol 6: Comparative RP-HPLC analyses of crude, fully deprotected DNA or RNA sequences released from the poly(hexaethylene glycol)-derived CPG support 10 and from a commercial LCAA-CPG support.

An expedient process for reducing the formation of process-related impurities during solid-phase synthesis of potential nucleic acid-based drugs

With the intent of mitigating the formation of process-related impurities during solid-phase synthesis of DNA or RNA sequences, a hydroxylated controlled-pore glass support conjugated to three, five or seven hexaethylene glycol spacers was prepared and demonstrated to provide a more efficient and robust synthesis process. Indeed, the use of a support conjugated to five hexaethylene glycol spacers led to a 19% up to 42% reduction of process-related impurities contaminating synthetic nucleic acid sequences, when compared to that obtained from the same DNA/RNA sequences synthesized using a commercial long-chain alkylamine controlled-pore glass support under highly similar conditions.

A High-Throughput Process for the Solid-Phase Purification of Synthetic DNA Sequences.

An efficient process for the purification of synthetic phosphorothioate and native DNA sequences is presented. The process is based on the use of an aminopropylated silica gel support functionalized with aminooxyalkyl functions to enable capture of DNA sequences through an oximation reaction with the keto function of a linker conjugated to the 5'-terminus of DNA sequences. Deoxyribonucleoside phosphoramidites carrying this linker, as a 5'-hydroxyl protecting group, have been synthesized for incorporation into DNA sequences during the last coupling step of a standard solid-phase synthesis protocol executed on a controlled pore glass (CPG) support. Solid-phase capture of the nucleobase- and phosphate-deprotected DNA sequences released from the CPG support is demonstrated to proceed near quantitatively. Shorter than full-length DNA sequences are first washed away from the capture support; the solid-phase purified DNA sequences are then released from this support upon reaction with tetra-n-butylammonium fluoride in dry dimethylsulfoxide (DMSO) and precipitated in tetrahydrofuran (THF). The purity of solid-phase-purified DNA sequences exceeds 98%. The simulated high-throughput and scalability features of the solid-phase purification process are demonstrated without sacrificing purity of the DNA sequences. © 2017 by John Wiley & Sons, Inc.

A Simple Post-Polymerization Modification Method for Controlling Side-Chain Information in Digital Polymers.

A three-step post-polymerization modification method was developed for the design of digitally encoded poly(phosphodiester)s with controllable side groups. Sequence-defined precursors were synthesized, either manually on polystyrene resins or automatically on controlled pore glass supports, using two phosphoramidite monomers containing either terminal alkynes or triisopropylsilyl (TIPS) protected alkyne side groups. Afterwards, these polymers were modified by stepwise copper-catalyzed azide-alkyne cycloaddition (CuAAC). The terminal alkynes were first reacted with a model azide compound, and after removal of the TIPS groups, the remaining alkynes were reacted with another organic azide. This simple method allows for quantitative side-chain modification, thus opening up interesting avenues for the preparation of a wide variety of digital polymers.

A practical post-modification synthesis of oligodeoxynucleotides containing 4,7-diaminoimidazo[5′,4′:4,5]pyrido[2,3-d]pyrimidine nucleoside

We describe herein the practical post-modification synthesis of oligodeoxynucleotides (ODNs) containing 4,7-diaminoimidazo[5′,4′:4,5]pyrido[2,3-d]pyrimidine nucleoside (ImNN). Since the ImNN nucleoside unit possessing tribenzoyl groups on its exocyclic amino groups as the protecting group was quite unstable under acidic conditions, cleavage of its glycosidic linkage in ODN has been suggested throughout the conditions of solid-phase synthesis. As an alternative approach, we investigated a post-modification synthesis of the desired ODNs containing the ImNN unit. Starting with protected 4-amino-7-chloro-1-(2-deoxy-β-d-ribofuranosyl)imidazo[5′,4′:4,5]pyrido[2,3-d]pyrimidine derivative 1, conversion into the corresponding phosphoramidite unit was examined. The p-bromobenzoyl group (p-BrBz) was the best protecting group of 4-amino group of 1 to give the phosphoramidite unit 9 for the post-modification synthesis. After carrying out the ODN synthesis linked to the controlled pore glass (CPG) support, the support was treated with ammonium hydroxide at 55°C to remove the protecting groups, detach the ODN form the CPG support, and convert the 7-chloro group into a desired amino group. As a result, the desired ODNs containing ImNN were obtained in good yield.

Modulation of pKa of Brooker’s Merocyanine by DNA Hybridization

Brooker's merocyanine (BM), which changes its emission and absorption maxima upon protonation, was introduced into oligodeoxyribonucleotide (ODN) via d-threoninol by postsynthetic modification on a CPG (controlled-pore glass) support. The pK(a) of BM in the modified ODN increased from 9.5 to 10.1 upon hybridization. As a result, absorption maxima shifted from 492 to 432 nm at pH 10.0 by the presence of its complementary strand. This spectral shift was sufficiently large so that DNA hybridization could easily be discriminated even by the naked eye; the color of the solution changed from orange to yellow upon hybridization. In addition, the fluorescence emission was strongly quenched upon hybridization, demonstrating that this probe can also detect the target DNA by the fluorescence change. Ratiometric detection of hybridization was also possible by simultaneous excitation of both protonated and deprotonated BMs. Furthermore, we could also modulate its pK(a) by the antiparallel stacking of two BM molecules in the duplex; the pK(a) of BM decreased from 10.1 to 9.7 by the stacking of two BMs in an antiparallel manner. Thus, control of the microenvironment around the BM molecule allowed modulation of its pK(a), which is applicable to the sequence-specific recognition of target DNA.

Release of DNA Oligonucleotides and Their Conjugates from Controlled‐Pore Glass Under Thermolytic Conditions

The sequential functionalization of long-chain alkylamine controlled-pore glass (CPG) with a 3-hydroxypropyl-(2-cyanoethyl)thiophosphoryl linker and a dinucleoside phosphorotetrazolide leads to a uniquely engineered support for solid-phase synthesis. Unlike conventional succinylated-CPG supports, this support is designed to allow oligonucleotide deprotection and elimination of deprotection side-products to proceed without release of the oligonucleotide. When needed, the DNA oligonucleotide can be thermolytically released in 2 hr under essentially neutral conditions. The modified CPG support has been successfully employed in the synthesis of both native and fully phosphorothioated DNA 20-mers. On the basis of reversed-phase HPLC and electrophoretic analyses, the purity of the released oligonucleotides is comparable to that of identical oligonucleotides synthesized from succinylated-CPG supports, in terms of both shorter-than-full-length oligonucleotide contaminants and overall yields. The detailed preparation of DNA oligonucleotides conjugated with exemplary reporter or functional groups, either at the 3'-terminus or at both 3'- and 5'-termini, is also described.

Thermolytic Release of Covalently Linked DNA Oligonucleotides and Their Conjugates from Controlled-Pore Glass at Near Neutral pH

The functionalization of long chain alkylamine controlled-pore glass (CPG) with a 3-hydroxypropyl-(2-cyanoethyl)thiophosphoryl linker and its conversion to the support 7 has led to the synthesis of DNA oligonucleotides and their 3'- or (3',5')-conjugates. Indeed, CPG support 7 has been successfully employed in the synthesis of both native and fully phosphorothioated DNA 20-mers. Unlike conventional succinylated CPG supports, this distinctively functionalized support allows oligonucleotide deprotection and removal of the deprotection side products to proceed without releasing the oligonucleotide into the aqueous milieu. When freed from deprotection side products, the DNA oligonucleotide is thermolytically released from the support within 2 h under nearly neutral conditions (pH 7.2, 90 degrees C). The quality of these oligonucleotides is comparable to that of identical oligonucleotides synthesized from succinylated CPG supports in terms of shorter than full length oligonucleotide contaminants and overall yields. The versatility of the thermolytic CPG support 7 is further demonstrated by the synthesis of a DNA oligonucleotide (20-mer) and its conjugation with an azido and alkynyl groups at both 5'-and 3'-termini, respectively. The functionality of the (3',5')-heteroconjugated oligonucleotide 18 is verified by its circularization to the DNA oligonucleotide 19 under "click" chemistry conditions.

Structure of a High Fidelity DNA Polymerase Bound to a Benzo[a]pyrene Adduct That Blocks Replication

Of the carcinogens to which humans are most frequently exposed, the polycyclic aromatic hydrocarbon benzo[a]pyrene (BP) is one of the most ubiquitous. BP is a byproduct of grilled foods and tobacco and fuel combustion and has long been linked to various human cancers, particularly lung and skin. BP is metabolized to diol epoxides that covalently modify DNA bases to form bulky adducts that block DNA synthesis by replicative or high fidelity DNA polymerases. Here we present the structure of a high fidelity polymerase from a thermostable strain of Bacillus stearothermophilus (Bacillus fragment) bound to the most common BP-derived N2-guanine adduct base-paired with cytosine. The BP adduct adopts a conformation that places the polycyclic BP moiety in the nascent DNA minor groove and is the first structure of a minor groove adduct bound to a polymerase. Orientation of the BP moiety into the nascent DNA minor groove results in extensive disruption to the interactions between the adducted DNA duplex and the polymerase. The disruptions revealed by the structure of Bacillus fragment bound to a BP adduct provide a molecular basis for rationalizing the potent blocking effect on replication exerted by BP adducts.

Oligonucleotide synthesis onto poly(N‐acryloylmorpholine‐co‐N‐acryloxysuccinimide): Assessment of the resulting conjugates in a DNA sandwich hybridization test

AbstractA water‐soluble statistical poly(N‐acryloylmorpholine‐co‐N‐acryloxysuccinimide) [poly(NAM/NAS)] copolymer was studied for polymer–oligonucleotide (ODN) conjugate elaboration and for further use in diagnostic applications. Three different copolymers were first prepared by free‐radical solution polymerization with different N‐acryloylmorpholine (NAM) and N‐acryloxysuccinimide (NAS) molar ratios (80/20, 70/30, and 60/40). Their number‐average molecular weights ranged from 98,000 to 120,000 g/mol, as determined by aqueous size exclusion chromatography with an online light‐scattering detector. Then, polymer–ODN conjugates were obtained via a strategy consisting of the direct synthesis of ODNs onto polymer chains previously grafted onto a controlled pore glass support. Before the grafting of the polymer onto the solid support, a preliminary step was performed to bind a nucleotide starter along the polymer chain (via the reactive NAS units) to initiate automated DNA synthesis. To multiply the number of ODNs growing from starters, a branched phosphoramidite synthon [bearing two O‐dimethoxytrityl groups] was introduced at the first step of ODN elongation as a short sequence of four branched synthons alternated with three thymidine residues. Conjugates were assessed in a DNA sandwich hybridization test developed for hepatitis B virus detection. Sensitivity limits were evaluated and compared to those obtained with an other polymer, poly(maleic anhydride‐alt‐methyl vinyl ether) [poly(MA/MVE)]. A sensitivity limit of 2.6 × 107 DNA copies/mL was reached with the poly(MA/MVE)–ODN conjugate at the capture phase and with the poly(NAM/NAS)–branched ODN conjugate at the detection phase of the test. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3784–3795, 2004

Operation and performance of analytical packed-bed reactors with an immobilised alcohol oxidase

Hansenula polymorpha alcohol oxidase (AOX) was immobilised on propylamino-derivatised controlled pore glass (CPG) by covalent attachment using glutaraldehyde (GA) as cross-linker. Different pore and particle sizes were used as well as different experimental conditions (GA concentration, buffer type, pH, time of activation) to optimise the enzymatic productivity and operational stability of the immobilised enzyme. The best results were obtained by activating CPG with 6.5% GA in phosphate buffer, pH 7, for 1 h. The highest activity (0.45 U/mg) and productivity (6.2 mol/m 3 min) were obtained with a CPG support with 120–200 mesh and 550 Å pore size. Mini packed-bed bioreactors (9.4–69 mm 3) with the immobilised AOX, were used to monitor ethanol. The performance of the bioreactors was simulated using a plug flow model. External mass transfer limitations were observed for residence times higher than 2 s. The bioreactors operated continuously at 32 °C for more than 14 h without significant loss of performance (less than 5%). Ethanol in real samples such as beer, brandy and fermentation media was also successfully monitored. Bi-enzymatic bioreactors containing AOX and HRP were further constructed and displayed a similar performance.

A novel solid support for the synthesis of 3′-aminoalkylated oligonucleotides

A novel improved controlled pore glass (CPG) support based on the 2-(hydroxymethyl)-6-nitrobenzoyl (HMNB) protecting group was developed for the synthesis of 3′-aminoalkylated oligonucleotides. The release of oligonucleotides with free 3′-amino groups from the support is complete within 2h at 55°C in concentrated ammonia.

4-(2-Aminooxyethoxy)-2-(ethylureido)quinoline−Oligonucleotide Conjugates: Synthesis, Binding Interactions, and Derivatization with Peptides

Oligo-2'-O-methylribonucleotides conjugated with 4-(2-aminooxyethoxy)-2-(ethylureido)quinoline (AOQ) and 4-ethoxy-2-(ethylureido)quinoline (EOQ) were prepared by reaction of the AOQ or EOQ phosphoramidite with the protected oligonucleotide on a controlled pore glass support. Deprotection with ethylenediamine enabled successful isolation and purification of the highly reactive AOQ-conjugated oligomer. Polyacrylamide gel electrophoresis mobility shift experiments showed that the dissociation constants of complexes formed between an AOQ- or EOQ-conjugated 8-mer and complementary RNA or 2'-O-methyl-RNA targets (9- and 10-mers) were in the low nM concentration range at 37 degrees C, whereas no binding was observed for the corresponding nonconjugated oligomer, even at a concentration of 500 nM. Fluorescence studies suggested that this enhanced affinity is most likely due to the ability of the quinoline ring of the AOQ or EOQ group to stack on the last base pair formed between the oligomer and target, thus stabilizing the duplex. The binding affinity of a 2'-O-methyl RNA 15-mer, which contained an alternating methylphosphonate/phosphodiester backbone, for a 59-nucleotide stem-loop HIV TAR RNA target, increased 2.3 times as a consequence of conjugation with EOQ. The aminooxy group of AOQ-conjugated oligomers is a highly reactive nucleophile, which reacts readily with aldehydes and ketones to form stable oxime derivatives. This feature was used to couple an AOQ-oligomer with leupeptin, a tripeptide that contains a C-terminus aldehyde group. A simple method was developed to introduce a ketone functionality into peptides that contain a cysteine residue by reacting the peptide with bromoacetone. The resulting keto-peptide was then coupled to the AOQ-oligomer. This procedure was used to prepare oligonucleotide conjugates of a tetrapeptide, RGDC, and a derivative of HIV tat peptide having a C-terminus cysteine. The combination of the unique reactivity of the aminooxy group and enhanced binding affinity conferred by its quinoline ring suggests that AOQ may serve as a useful platform for the preparation of novel oligonucleotide conjugates.

SYNTHESIS AND HYBRIDIZATION PROPERTIES OF RNA CONTAINING 8-CHLOROADENOSINE

ABSTRACT 8-Chloroadenosine (8-Cl-Ado) has shown potential as a chemotherapeutic agent for the treatment of multiple myeloma and certain leukemias. 8-Cl-Ado treatment leads to a decrease in global RNA levels and incorporation of the analog into cellular RNA in malignant cells. To investigate the effects of 8-Cl-Ado modifications on RNA structure and function, an 8-Cl-Ado phosphoramidite and controlled-pore glass support were synthesized and used to introduce 8-Cl-Ado at internal and 3′- terminal positions, respectively. RNA oligonucleotides containing 8-chloroadenine (8-Cl-A) residues were synthesized and hybridized with complementary RNA strands. Circular dichroism spectroscopy of the resulting RNA duplexes revealed that the modified nucleobase does not perturb the overall A-form helix geometry. The thermal stabilities of 8-Cl-Ado modified duplexes were determined by UV thermal denaturation analysis and were compared with analogous natural duplexes containing standard and mismatched base pairs. The 8-Cl-Ado modification destabilizes RNA duplexes by ∼5 kcal/mole, approximately as much as a U:U mismatched base pair. The duplex destabilization of 8-Cl-A may result from perturbation of Watson-Crick base pairing induced by conformational preferences of 8-halogenated nucleosides.

Total stepwise solid-phase synthesis of oligonucleotide-(3'-->N)-peptide conjugates.

[structure: see text] An efficient total stepwise solid-phase synthesis of oligonucleotide-(3'-->N)-peptide conjugates is described that makes use of either a controlled pore glass support or macroporous polystyrene beads. Extending our previous homoserine linker approach, we prepared a range of conjugates containing one of four different cell or nuclear penetration peptides together with oligonucleotides containing 2'-deoxynucleoside or 2'-O-methylribonucleoside phosphodiesters, or gapmers containing 2'-deoxyphosphorothioates. The route also allows incorporation of a fluorescent label within the conjugate for cell uptake studies.

Retention and separation of adenosine and analogues by affinity chromatography with an aptamer stationary phase.

A biotinylated-DNA aptamer (molecular weight 16,600) that binds adenosine and related compounds in solution was immobilized by reaction with streptavidin, which had been covalently attached to porous chromatographic supports. The aptamer medium was packed into fused-silica capillaries (50-150-microm i.d.) to form affinity chromatography columns. Frontal chromatography analysis indicated that the dissociation constants (Kd) of cyclic-AMP, AMP, ATP, ADP, and adenosine were 138 +/- 18, 58 +/- 2, 38 +/- 2, 28 +/- 6 and 3 +/- 1 microM, respectively, for aptamer immobilized on a controlled pore glass support. Similar values were obtained for aptamer immobilized on a polystyrene support except for a slightly higher Kd for adenosine. The Kd for adenosine is similar to the previously reported value of 6 +/- 3 microM for adenosine-aptamer in solution indicating that immobilized aptamers can have affinity similar to that of the solution forms. Columns had 20 nmol of binding sites/100 microL of support media, which is 3.3-fold higher than that previously reported for immobilization of IgG on similar media, indicating that the aptamer can be immobilized with higher density than antibodies. Variation of mobile-phase conditions revealed that ionic strength and Mg2+ level had strong effects on retention of analytes while pH and buffer composition had less of an effect. It was demonstrated that the column could selectively retain and separate cyclic-AMP, NAD+, AMP, ADP, ATP, and adenosine, even in complex mixtures such as tissue extracts.

Synthesis and characterization of DNA duplexes containing an N(4)C-ethyl-N(4)C interstrand cross-link.

Short DNA duplexes containing an N(4)C-ethyl-N(4)C interstrand cross-link, C-C, were synthesized on controlled pore glass supports. Duplexes having two, three, or four A/T base pairs on either side of the C-C cross-link and terminating with a C(4) overhang at their 5'-ends were prepared. The cross-link was introduced using a convertible nucleoside approach. Thus, an oligonucleotide terminating at its 5'-end with O(4)-triazoyl-2'-deoxyuridine was first prepared on the support. The triazole group of support-bound oligomer was displaced by the aminoethyl group of 5'-dimethoxytrityl-3'-O-tert-butyldimethylsilyl-N(4)-(2-aminoethyl)deoxycytidine to give the cross-link. The dimethoxytrityl group was removed, and the upper and lower strands of the duplex were extended from two 5'-hydroxyl groups of the cross-link using protected nucleoside 3'-phosphoramidites. The tert-butyldimethylsilyl group of the resulting partial duplex was then removed, and the chain was extended in the 3'-direction from the resulting 3'-hydroxyl of the cross-link using protected nucleoside 5'-phosphoramidites. The cross-linked duplexes were purified by HPLC and characterized by enzymatic digestion and MALDI-TOF mass spectrometry. Duplexes with three or four A/T base pairs on either side of the C-C cross-link gave sigmoidal shaped A(260) profiles when heated, a behavior consistent with cooperative denaturation of the A/T base pairs. Each cross-linked duplex could be ligated to an acceptor duplex using T4 DNA ligase, a result that suggests that the C-C cross-link does not interfere with the ligation reaction, even when it is located only two base pairs from the site of ligation. The ability to synthesize duplexes with a defined interstrand cross-link and to incorporate these duplexes into longer pieces of DNA should enable preparation of substrates that can be used for a variety of biophysical and biochemical experiments, including studies of DNA repair.

Oligonucleotide-polymer conjugates: effect of the method of synthesis on their structure and performance in diagnostic assays.

Oligonucleotide-polymer conjugates have been described to improve the sensitivity of an enzyme-linked oligosorbent assay diagnostic test. To understand the influence of their structure and conformation in solution on the efficiency of the test during the capture step, two different ways of synthesizing these conjugates were compared. The first consisted of coupling 5' amino modified oligonucleotides to poly(maleic anhydride-alt-methylvinyl ether) and poly(maleic anhydride-alt-ethylene). The second resulted from direct synthesis of oligonucleotides from poly(maleic anhydride-alt-ethylene) previously grafted onto a controlled pore glass support. The different conjugates were analyzed by size-exclusion chromatography and viscometry. The former method for conjugate synthesis produced aggregates, which was not the case for the latter. These conjugates were then used in the capture phase of a hybridization assay using a HBV DNA target, on a bioMérieux VIDAS instrument. Different parameters were studied, such as the purity of the conjugate solution and the number of oligonucleotides per polymer chain. The amount of conjugate coated on the solid-phase receptacle surface at the time of the capture phase was evaluated by radioactive labeling. Finally, it was demonstrated that conjugates produced an amplification factor of 50 versus the capture oligonucleotide probe used as the reference. The detection limit reached 10(8) copies/mL.

Synthesis of 3',5'-Dipeptidyl Oligonucleotides.

Peptide-DNA hybrids are richly functionalized analogues of biomolecules that may have applications as hybridization probes and antisense agents with tunable binding and targeting properties. So far, synthetic efforts have mainly focused on hybrids bearing a single peptide chain, either at the 5'- or the 3'-terminus. Such singly modified analogues are vulnerable to nuclease attack at the unmodified terminus. Here we report a convenient and high-yielding solid-phase synthesis of 3'- and 5'-modified analogues of DNA with aminoacyl and peptidyl appendages at both termini. Using MALDI-TOF mass spectra of crude products as the criterion, serine, glycolic acid, hydroxylauric acid, and dimethyl hydroxypropionic acid were tested as 3'-linker residues. The latter, together with a direct amide link at the 5'-terminus, gave the highest yields of hybrids. The optimized procedure assembles hybrids on a controlled pore glass support bearing three consecutive omega-hydroxy lauric acid linkers. This support greatly reduces side reactions observed with conventional supports, probably due to its ability to increase steric accessibility during coupling ("swelling") and its rapid hydrolysis during deprotection with ammonium hydroxide. Dihybrids with aromatic, basic, and acidic amino acid residues were prepared, including H-Phe-Gly-TGCGCA-DP-Phe-OH, where DP denotes the dimethyl hydroxypropionic acid linker, whose structure was confirmed via mass spectrometry and one- and two-dimensional NMR. Further, a mixed coupling with seven Fmoc-protected amino acids was shown to produce a combinatorial library of dipeptidyl DNA hybrids.