Control Method Of Grid-connected Inverter Research Articles

A Current Control Method for Grid-Connected Inverters

It is simple to implement conventional current control with a proportional integral (PI) controller. However, system stability and dynamic performance are not perfect, particularly when operating under unfavorable conditions. In this paper, an improved control method is proposed by introducing a compensation unit. The compensation unit can effectively compensate the system’s phase around the crossover frequency, greatly enhancing the system’s phase margin and stability. It is also capable of handling weak-grid conditions. In this paper, the concept of the proposed compensation unit is explained first. Then, the corresponding mathematical model for the current control loop is built, and system bode diagrams for the conventional and proposed methods are compared. Furthermore, the effect of the parameters for the compensation unit is investigated, and an optimization method is proposed to determine optimal parameters. In addition, to handle weak-grid conditions, the proposed scheme is expanded by including the compensation unit in the grid’s feed-forward loop. Finally, an experimental platform is constructed, and the experimental results are presented to validate the proposed method.

An Inductance Online Identification-Based Model Predictive Control Method for Grid-Connected Inverters With an Improved Phase-Locked Loop

To simplify the tuning process and enhance the parameter robustness of the model predictive control (MPC) for grid-connected inverters, an improved phase-locked loop (PLL) and a new inductance online identification method are proposed in this article. First, an improved finite control set-based PLL is presented, which removes the PI controller, simplifying the tuning process. Next, a new inductance online identification method based on a model reference adaptive system is presented, which takes the actual grid voltage and the estimated one as the reference model and adjustable model, respectively. Here, a sliding mode observer (SMO) is proposed to estimate the grid voltage, and the inductance adaptive law is deduced by exploring the effects of the inductance on the estimated grid voltage. Furthermore, the sensitivity of the proposed SMO to frequency deviation is also analyzed, which shows that a proper sliding mode gain can be selected to reduce the effects of frequency deviation. Thus, a fixed grid frequency of 50 Hz can be used in the proposed SMO, indicating that it is not required to calculate the actual grid frequency using differential operation any more. Finally, experimental studies verify the validity of the proposed strategies.

Frequency-Division Virtual Impedance Shaping Control Method for Grid-Connected Inverters in a Weak and Distorted Grid

Grid-connected current quality is seriously affected by the low-order background harmonics in the gird-inverter dynamic system. The point of common coupling voltage feedforward impedance reshaping method of the grid-connected inverter is generally applied to solve this problem, however about 90° phase lag of the inverter output impedance is brought in, which would deteriorate the adaptability of the inverter to the weak grid. To solve this problem, this article proposes a novel frequency-division virtual impedance shaping method, which shapes the output impedance of the grid-connected inverter with different coefficients in different frequency bands, respectively. The basic principles, parameters design, and application analysis are studied in detail. With the proposed scheme, the grid-connected inverter can be equipped with strong adaptability to a wide range of grid impedance and suppression ability to the background voltage harmonics simultaneously. Theoretical analysis and experimental results confirm the effectiveness of the proposed method.

Single-phase photovoltaic grid-connected inverter for predictive control method with power feed-forward

In the traditional photovoltaic grid-connected inverter control, there are problems such as slow system response speed, low stability and grid-connected current distortion. In this regard, a novel current prediction control method for grid-connected inverter with power feed-forward is proposed. The method consists of DC voltage outer loop control, current predictive control, power feed-forward and grid voltage feed-forward. The characteristic is that the current prediction control algorithm derived from the state equation of the grid-connected inverter effectively suppresses the influence of DC voltage fluctuation on the grid-connected current and enhances the robustness of the system; the introduction of power feed-forward accelerates the dynamic response of the system; The introduction of grid voltage feed-forward reduces voltage distortion or current distortion. And the traditional PI control module is not needed, the structure is simple, and the circuit is easy to implement. Matlab/Simulink simulation model and experimental results prove the effectiveness of the proposed control method, which is more practical than the traditional double loop control method.

A New Compensation Control Strategy for Grid-connected Wind Turbine and Fuel Cell Inverters in a Microgrid

The use of a new control method for grid-connected inverters for reducing the output current harmonic distortion in a wide range of grid-connected distributed generation (DG) applications, including wind turbine (WT) and fuel cell (FC) inverters is proposed in this paper. The control method designed to eliminate main harmonics in a microgrid (MG) and between MG and point of common coupling (PCC) and responsible for the correction of the system unbalance. Another advantage of the proposed control method is that it can be easily adopted into the DG control system without the installation of extra hardware. The proposed control method is comprised of the synchronous reference frame method (SRF). Results from the proposed control method are provided to show the feasibility of the proposed approach.

Impedance-Phased Dynamic Control Method for Grid-Connected Inverters in a Weak Grid

A power distribution grid exhibits the characteristics of a weak grid owing to the existence of scattered high-power distributed power-generation devices. The grid impedance affects the robust stability of grid-connected inverters, leading to harmonic resonance, or even instability in the system. Therefore, a study of the stability of grid-connected inverters with high grid impedance based on impedance analysis is presented in this paper. The output impedance modeling of an LCL -type single-phase grid-connected inverter is derived, where the effects of the PLL loop and the digital control delays on the output impedance characteristics have been taken into account. To enhance the stability of grid-connected inverters with different grid impedance, a novel impedance-phased compensation control strategy is proposed by increasing the phase margin of the grid-connected inverters. Specifically, a detailed implementation and parameter design of the impedance-phased compensation control method is depicted. Finally, an impedance-phased dynamic control scheme combined with online grid impedance measurement is introduced and also verified by the experiment results.