Continuous-flow Peptide Synthesis Research Articles

The renascence of continuous-flow peptide synthesis - an abridged account of solid and solution-based approaches.

Within a decade of Merrifield's seminal description of solid-phase peptide synthesis, the synergies between solid-phase approaches and flow synthesis were noted by a number of groups. However, despite the various advantages flow brings to peptide synthesis, throughout the 1990s and 2000s, interest in the technique was overshadowed by microwave assisted approaches. However, the current expansion of flow technologies has reinvigorated interest in both solid-phase and solution-phase continuous-flow approaches for assembling peptides. This perspective traces the introduction and evolution of continuous-flow solid-phase synthesis from a practical aspect with a particular focus on solid supports, acylation protocols, and racemisation suppression. Practical aspects of solution-phase continuous-flow peptide synthesis are also considered with an evaluation of microreactor systems, coupling protocols, and fragment-based approaches for assembly of extended peptide units.

PEGA supports for combinatorial peptide synthesis and solid-phase enzymatic library assays.

Permeable resins cross-linked with long PEG chains were synthesized for use in solid-phase enzyme library assays. High molecular weight bis-amino-polyethylene glycol (PEG) 4000, 6000, 8000 were synthesized by a three-step reaction starting from PEG-bis-OH. Macromonomers were synthesized by partial or di-acryloylation of bis-amino-PEG derivatives. Bis/mono-acrylamido-PEG were copolymerized along with acrylamide by inverse suspension copolymerization to yield a less cross-linked resin (Type I, compounds 6-9). Furthermore, acryloyl-sarcosin ethyl ester was co-polymerized along with bis-acrylamido PEG to obtain more crosslinked capacity resin (Type II, compounds 13-19). N,N-Dimethylacrylamide was used as a co-monomer in some cases. The polymer was usually obtained in a well-defined beaded form and was easy to handle under both wet and dry conditions. The supports showed good mechanical properties and were characterized by studying the swelling properties, size distribution of beads, and by estimating the amino group capacity. Depending on the PEG chain length, the monomer composition and the degree of cross-linking the PEGA supports showed a high degree of swelling in a broad range of solvents, including water, dichloromethane, DMF, acetonitril, THF and toluene: no swelling was observed in diethyl ether. The PEGA resins (Type I) with an amino acid group capacity between 0.07 and 1.0 mmol/g could be obtained by variation of the monomer composition in the polymerization mixture. Fluorescent quenched peptide libraries were synthesized on the new polymer using a multiple column library synthesizer and incubated with the matrix metalloproteinase MMP-9 after it had been activated by 4-aminophenyl mercuric acetate resulting in 67/83 kDa active enzyme. The bright beads were separated manually under a fluorescence microscope and sequenced to obtain peptide substrates for MMP-9. After treatment with ethylene diamine, high-loaded resins (Type II) have been employed in continuous flow peptide synthesis to yield peptides in excellent yield and purity.

PEGA supports for combinatorial peptide synthesis and solid-phase enzymatic library assays

Permeable resins cross-linked with long PEG chains were synthesized for use in solid-phase enzyme library assays. High molecular weight bis-amino-polyethylene glycol (PEG) 4000, 6000, 8000 were synthesized by a three-step reaction starting from PEG-bis-OH. Macromonomers were synthesized by partial or di-acryloylation of bis-amino-PEG derivatives. Bis/mono-acrylamido–PEG were copolymerized along with acrylamide by inverse suspension copolymerization to yield a less cross-linked resin (Type I, compounds 6–9). Furthermore, acryloyl–sarcosin ethyl ester was co-polymerized along with bis-acrylamido PEG to obtain more crosslinked capacity resin (Type II, compounds 13–19). N,N-Dimethylacrylamide was used as a co-monomer in some cases. The polymer was usually obtained in a well-defined beaded form and was easy to handle under both wet and dry conditions. The supports showed good mechanical properties and were characterized by studying the swelling properties, size distribution of beads, and by estimating the amino group capacity. Depending on the PEG chain length, the monomer composition and the degree of cross-linking the PEGA supports showed a high degree of swelling in a broad range of solvents, including water, dichloromethane, DMF, acetonitril, THF and toluene; no swelling was observed in diethyl ether. The PEGA resins (Type I) with an amino acid group capacity between 0.07 and 1.0 mmol/g could be obtained by variation of the monomer composition in the polymerization mixture. Fluorescent quenched peptide libraries were synthesized on the new polymer using a multiple column library synthesizer and incubated with the matrix metalloproteinase MMP-9 after it had been activated by 4-aminophenyl mercuric acetate resulting in 67/83 kDa active enzyme. The bright beads were separated manually under a fluorescence microscope and sequenced to obtain peptide substrates for MMP-9. After treatment with ethylene diamine, high-loaded resins (Type II) have been employed in continuous flow peptide synthesis to yield peptides in excellent yield and purity. © 1998 European Peptide Society and John Wiley & Sons, Ltd.

PEGA supports for combinatorial peptide synthesis and solid-phase enzymatic library assays

Permeable resins cross-linked with long PEG chains were synthesized for use in solid-phase enzyme library assays. High molecular weight bis-amino-polyethylene glycol (PEG) 4000, 6000, 8000 were synthesized by a three-step reaction starting from PEG-bis-OH. Macromonomers were synthesized by partial or di-acryloylation of bis-amino-PEG derivatives. Bis/mono-acrylamido–PEG were copolymerized along with acrylamide by inverse suspension copolymerization to yield a less cross-linked resin (Type I, compounds 6–9). Furthermore, acryloyl–sarcosin ethyl ester was co-polymerized along with bis-acrylamido PEG to obtain more crosslinked capacity resin (Type II, compounds 13–19). N,N-Dimethylacrylamide was used as a co-monomer in some cases. The polymer was usually obtained in a well-defined beaded form and was easy to handle under both wet and dry conditions. The supports showed good mechanical properties and were characterized by studying the swelling properties, size distribution of beads, and by estimating the amino group capacity. Depending on the PEG chain length, the monomer composition and the degree of cross-linking the PEGA supports showed a high degree of swelling in a broad range of solvents, including water, dichloromethane, DMF, acetonitril, THF and toluene; no swelling was observed in diethyl ether. The PEGA resins (Type I) with an amino acid group capacity between 0.07 and 1.0 mmol/g could be obtained by variation of the monomer composition in the polymerization mixture. Fluorescent quenched peptide libraries were synthesized on the new polymer using a multiple column library synthesizer and incubated with the matrix metalloproteinase MMP-9 after it had been activated by 4-aminophenyl mercuric acetate resulting in 67/83 kDa active enzyme. The bright beads were separated manually under a fluorescence microscope and sequenced to obtain peptide substrates for MMP-9. After treatment with ethylene diamine, high-loaded resins (Type II) have been employed in continuous flow peptide synthesis to yield peptides in excellent yield and purity. © 1998 European Peptide Society and John Wiley & Sons, Ltd.

Design and application of a new rigid support for high efficiency continuous-flow peptide synthesis

A new high capacity composite support consisting of an extremely porous, rigid matrix which provides a scaffold into which a soft polyacrylamide-based gel is chemically bound has been developed and its application in low-pressure continuous-flow solid-phase peptide synthesis is described.

Continuous Flow Peptide Synthesis on Aminopolyoxyethylene-Polystyrene Graft Copolymer using Fmoc-Strategy

An insoluble graft copolymer consisting of the covalently bound polyoxyethylene to cross-linked polystyrene (HO-POE-PS) was prepared by anionic polymerization of ethylene oxide on the resin. The copolymer was then converted to the corresponding amino-polymer (H2N-POE-PS) and the latter was employed as the solid carrier for peptide synthesis. Although HO-POE-PS has successfully been employed as a carrier for peptide synthesis by the standard shaking procedure using t-butoxycarbonyl-amino acids, now we deemed it of interest to test its suitability for the continuous flow synthesis. Thus, the C-terminal octapeptide of the porcine insulin B chain (B23-30) was prepared by this procedure using a photolabile anchoring group and fluoren-9-ylmethoxycarbonyl-amino acids. All the reactions were carried out in a continuous flow manner in a steel column under pressure using a high-performance liquid chromatography (HPLC) system. At the end of the synthesis, a sample of the protected peptide was cleaved from the support by photolysis. For the cleavage of another sample, an aqueous solution of sodium carbonate was employed. The protected peptide was purified on silica gel and Sephadex-LH 20. All the protecting groups of a sample of the octapeptide were removed with piperidine/dimethylformamide and trifluoroacetic acid and the deblocked peptide was purified by ion-exchange chromatography. The free peptide was shown to be homogeneous by thin-layer chromatography, HPLC, and electrophoresis. The identify of the free octapeptide was confirmed by amino-acid analysis, 13C-nuclear magnetic resonance measurement and field-desorption mass spectrometry. The peptide was also shown to be free of racemization.

ChemInform Abstract: Automated Continuous Flow Peptide Synthesis

ChemInformVolume 18, Issue 39 Reviews ChemInform Abstract: Automated Continuous Flow Peptide Synthesis R. P. ANDREWS, R. P. ANDREWS Protein Syst. Instrum., USASearch for more papers by this authorC. SUMMERS, C. SUMMERS Protein Syst. Instrum., USASearch for more papers by this author R. P. ANDREWS, R. P. ANDREWS Protein Syst. Instrum., USASearch for more papers by this authorC. SUMMERS, C. SUMMERS Protein Syst. Instrum., USASearch for more papers by this author First published: September 29, 1987 https://doi.org/10.1002/chin.198739393Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat No abstract is available for this article. Volume18, Issue39September 29, 1987 RelatedInformation

Automated continuous flow peptide synthesis

As peptide-based drugs and reagents become a reality, a new method of peptide synthesis is beginning to come into its own.