Contaminated Marine Sediments Research Articles

Remediation of sediments contaminated by harmful heavy metals using aluminum sulfate: Sustainable approach for practical applications

Chemical washing could be suitable for the remediation of marine sediments contaminated with harmful heavy metals. Considering green and sustainable remediation (GSR), the application of aluminum sulfate (AS) is intended to reduce the costs and environmental impacts. We extracted harmful heavy metals from manganese nodules using an ion exchange mechanism that occurs when AS dissociates in water. AS in the range from 2 % to 5 % was used. The remediation efficiencies using 5 % AS were found to be the highest, at 91.8 % for Ni and ≥ 100 % for other harmful heavy metals. The Pearson's coefficient evaluation showed that increasing elapsed time did not significantly affect the extraction of harmful heavy metals. Pollutants in post-processing products may not cause secondary pollutions if solidification/stabilization and additional treatments are used. Our results can serve as fundamental data for the actual remediation processes using AS not only for deep-sea mining tailings but also contaminated marine sediments.

A Multi-Geochemical Characterization to Evaluate Anthropogenic Contamination in Marine Sediments from Port of Suape, Northeast of Brazil

To investigate the anthropogenic contamination of the Port of Suape, five surface sediments were collected and subjected to a geochemical characterization based on the determination of environmental biomarkers such as sterols, aliphatic and polycyclic aromatic hydrocarbons, and also metals and arsenic. Sterol analyses point to a moderate level of sewage contamination, while n-alkanes analyses indicated contamination by petroleum in an early stage of biodegradation. Polycyclic aromatic hydrocarbons analyses pointed to a mixture of contributions for the organic matter, which were predominantly found for petrogenic and pyrolytic sources. The quantification of trace metals indicated a low risk to the environment, except for As, which was identified as displaying moderate contamination. During the analysis of all biomarkers, the sediment collected near one of the shipyards was the most affected. These results enable comprehension of the level of contamination in an important Brazilian port and the need to develop remediation policies.

Electrochemical remediation of synthetic and real marine sediments contaminated by PAHs, Hg and As under low electric field values

To date, remediation, protection, and restoration of contaminated sites is a global concern. The current technologies to restore sediments characterized by heterogeneous characteristics, several pollutants, fine grains, and low hydraulic permeability are poorly effective; hence their remediation is still challenging. A promising approach for the sediment's remediation could be the electrochemical route since it is a not-expensive, effective and noninvasive in situ technology. Electrochemical remediation (ER) is commonly studied under relatively high electric fields (E ≥ 1 V cm−1) and using costly processing fluids in a three compartments cell aiming to desorb and transport the contaminants into the processing fluids (secondary dangerous effluent). In this work, contaminated marine sediments were electrochemically treated focusing on the insertion of electrodes directly in the sediments and adopting, for the first time for real sediments, low E values (≤ 0.25 V cm−1) for 4-days period. It was observed that PAHs can be simultaneously transported and degraded in situ preventing the production of a secondary dangerous effluent and reducing the energy consumption. Firstly, clay marine sediments dragged from Capo Granitola Coast (Trapani, Italy) spiked with five PAHs congeners (5PAHs), Hg and As were used as a simplified model matrix and treated to simulate a real case study. A total PAHs removal efficiency of 57% was reached after 96 h of treatment under 0.05 V cm−1. Then, real polluted marine sediments from Augusta Bay (Syracuse) and Bagnoli-Coroglio Bay (Naples) in the southern Italy were treated as real contaminated sediments to be restored, to validate the proposed approach for real cases. A quite good removal efficiency of PAHs was reached after 96 h of electrochemical treatment coupled with a low energetic consumption due to the rather E values adopted. In addition, it was observed that this approach, under the adopted conditions, is unsuitable for the remediation of Hg and As.

A chemical remediation technique for a nearly-total removal of arsenic and mercury from contaminated marine sediments

After decades of industrial exploitation of the coast and consequent contamination of the sites and marine sediments, it became essential to recover the marine ecosystem by remediation methods to remove toxic contaminants. In this work, a remediation method was developed to clean marine sediments contaminated by arsenic (As) and mercury (Hg). The method can be applied to mobile platforms and is based on an environmentally friendly approach designed to minimise further contamination. The method was tested on two artificially contaminated sediments and two real samples collected from two highly contaminated sites in southern Italy, Augusta Bay and Bagnoli Gulf, characterised by high Hg and As concentrations, respectively. The method consists of four steps: washing with sodium hydroxide (NaOH) to remove metals associated with humic acid; Fenton-reaction using α-CycloDextrin (aCD) to stabilise Fe(II) at natural pH and oxidise As (III) and Hg (0 or I); complexation reaction with aCD; and complexation with sodium sulfide (Na2S) to remove Hg as soluble Hg-polysulfides. Compared to other remediation experiences in literature, this technique provides the best removal efficiency for As and Hg (ranging between 26 -71 % and 57–95 %, respectively). Considering the residual concentrations of As and Hg and the contamination threshold fixed by European Regulation for re-use, the treated sediment can be used in several civil and industrial contexts. The presented method operates in line with the principles of the circular economy to preserve natural resources, prevent secondary pollution, and promote the effective re-use of clean environmental matrices (soils, sediments and aqueous solutions), thus minimising landfill waste.

Contamination of the marine environment by Antarctic research stations: Monitoring marine pollution at Casey station from 1997 to 2015.

The contamination of the marine environment surrounding coastal Antarctic research stations remains insufficiently understood in terms of its extent, persistence, and characteristics. We investigated the presence of contaminants in marine sediments near Casey Station, located in the Windmill Islands of East Antarctica, during the period spanning from 1997 to 2015. Metals, hydrocarbons, PBDEs, PCBs, and nutrients were measured in sediments at anthropogenically disturbed sites, including the wastewater outfall, the wharf area, two former waste disposal sites, and various control locations. Sampling was carried out at three spatial scales: Locations, which were generally kilometres apart and formed the primary scale for comparison; Sites, which were 100 meters apart within each location; and Plots, which were 10 meters apart within each site. Consistently higher concentrations of most contaminants, and in some cases nutrients, were observed at disturbed locations. Some locations also exhibited an increase in contaminant concentrations over time. The spatial distribution of sediment properties (such as grain size and organic matter) and contaminants displayed intricate patterns of variation. Variation in grain size depended on the size category, with fine grains (e.g., <63 μm) showing the greatest variation at the Location scale, while coarse grains exhibited minimal variation at this scale. Contaminant levels demonstrated significant differences between Locations, accounting for approximately 55% of the overall variation for metals, while the variation within the 10-meter scale generally exceeded that within the 100-meter scale. Residual variation among replicate samples was also very high, demonstrating the need for adequate replication in studies of sediments and contaminants around stations. Some contaminants exceeded international guidelines for sediment quality, including metals, hydrocarbons, and PCBs. We conclude that Antarctic research stations such as Casey are likely to pose a moderate level of long-term ecological risk to local marine ecosystems through marine pollution. However, contamination is expected to be confined to areas in close proximity to the stations, although its extent and concentration are anticipated to increase with time. Raising awareness of the contamination risks associated with Antarctic stations and implementing monitoring programs for marine environments adjacent to these stations can contribute to informed decision-making and the improvement of environmental management practices in Antarctica.

Echinoderm larvae as bioindicators for the assessment of marine pollution: Sea urchin and sea cucumber responsiveness and future perspectives

Echinoderms play a crucial role in the functioning of marine ecosystems and due to their extensive distribution, rapid response, and the high sensitivity of their planktonic larvae to a large range of stressors, some species are widely used as biological indicators. In addition to sea urchins, sea cucumbers have recently been implemented in embryotoxicity bioassays showing high potential in ecotoxicological studies. However, the use of this species is still hindered by a lack of knowledge regarding their comparative responsiveness. The present study aimed to investigate the responsiveness of different echinoderm species to environmental pollution in order to develop their integration in batteries of ecotoxicological bioassays. To this end, the embryos of two sea urchins (Paracentrotus lividus and Arbacia lixula) and two sea cucumbers (Holothuria polii and Holothuria tubulosa) were incubated with inorganic and organic toxicants (cadmium, copper, mercury, lead, sodium dodecyl sulphate and 4-n-Nonhyphenol) and elutriates from contaminated marine sediments, chosen as a case study model. The results obtained, expressed through the percentage of abnormal embryos and Integrative Toxicity Indices (ITI), indicated species-specific sensitivities to pollutants, with comparable and correlated responsiveness between sea urchins and sea cucumbers. More specifically, sea cucumber larvae exposed to elutriates appear to be more sensitive than sea urchins, especially when incubated with samples containing trace metals, PCB and TBT. These results indicate that toxic responses in embryos exposed to environmental matrices are probably modulated by interactions between different variables, including additive, synergistic and antagonistic effects. These findings suggest that performing a larval test using different echinoderm classes can integrate the interactive effects of bioavailable fraction of contaminants on various levels, providing sensitive, representative and all year-round batteries of bioassays to apply in ecotoxicological studies.

Performance of electrokinetic remediation system for mercury contaminated marine sediment: Roles of electrode spacing and electrode configuration

Understanding mercury (Hg) species existing after electrokinetic remediation (EK) for marine-sediment remediation is limited. Herein, the Hg fraction removal of EK from contaminated marine sediment was investigated appertaining to bipolar electrode settings along with the effects of electrode spacing and configuration considered. Based on the selective sequential Hg extractions (Hg SSE), much of the Hg in the sediment originated from F5 (i.e., HgS) and F4 (i.e., HgO). The F5 fraction removed by EK was about 30 %, while the F4 fraction had a slight increase of about 34 %. When it comes to electrode configuration, a hexagonal pattern has a higher Hg removal performance than that of a rectangular shape. The addition of anodes increases the remediation surface area, thus allowing superior Hg removal. This study indicates that the electrode spacing significantly affects the mercury removal and the remediation time. Determining suitable spacing enhances the electrical potentials in the migration flux.

Site-specific response of sediment microbial community to supplementation of polyhydroxyalkanoates as biostimulants for PCB reductive dechlorination

The use of biodegradable plastics is constantly raising, increasing the likeliness for these polymers to end up in the environment. Environmental applications foreseeing the intentional release of biodegradable plastics have been also recently proposed, e.g., for polyhydroxyalkanoates (PHAs) acting as slow hydrogen releasing compounds to stimulate microbial reductive dehalogenation processes. However, the effects of their release into the environment on the ecosystems still need to be thoroughly explored. In this work, the use of PHAs to enhance the microbial reductive dechlorination of polychlorobiphenyls (PCBs) and their impact on the metabolic and compositional features of the resident microbial community have been investigated in laboratory microcosms of a polluted marine sediment from Mar Piccolo (Taranto, Italy), and compared with recent findings on a different contaminated marine sediment from Pialassa della Baiona (Ravenna, Italy). A decreased biostimulation efficiency of PHAs on PCBs reductive dechlorination was observed in the sediment from Mar Piccolo, with respect to the sediment from Pialassa della Baiona, suggesting that the sediments' physical-chemical characteristics and/or the biodiversity and composition of its microbial community might play a key role in determining the outcome of this biostimulation strategy. Regardless of the sediment origin, PHAs were found to have a specific and pervasive effect on the sediment microbial community, reducing its biodiversity, defining a newly arranged microbial core of primary degraders and consequently affecting, in a site-specific way, the abundance of subdominant bacteria, possibly cross-feeders. Such potential to dramatically change the structure of autochthonous microbial communities should be carefully considered, since it might have secondary effects, e.g., on the natural biogeochemical cycles.

Assessment of contamination of marine sediments and their potential toxicity in the Uglovoy Bay, Peter the Great Gulf, Sea of Japan/East Sea.

The content of harmful heavy metals in the bottom sediments of the Uglovoy Bay (Peter the Great Gulf, Sea of Japan/East Sea) was studied based on the surveys carried out in 2016-2021. The contamination of the sediments in the bay was compared to the background concentrations of elements and to common contamination indices. The degree of contamination was calculated using the contamination factor (Cf), modified overall degree of contamination (mCd), and index of geoaccumulation (Igeo). The toxicity of marine sediment samples for each metal was evaluated using the threshold effect level/probable effect level (TEL/PEL) values and the sediment quality guideline quotient (SQG-Q). The sources of pollutants entering the studied water area were analyzed. It is shown that the contamination of the Uglovoy Bay occurs continuously as a result of economic activities on its coast. The dynamics of contamination of the bay for the period 2016-2021 is presented.

Land-derived wastewater facilitates antibiotic resistance contamination in marine sediment of semi-closed bay: A case study in Jiaozhou Bay, China

The emergence of antibiotic resistance is a severe threat to public health. There are few studies on the effects of sewage discharge on antibiotics and antibiotic resistance genes (ARGs) contamination in Jiaozhou Bay sediment. Herein, a total of 281 ARG subtypes, 10 mobile genetic elements (MGEs), 10 antibiotics and bacterial communities in marine sediments from Jiaozhou Bay were characterized. Similar bacterial community structures and ARG profiles were identified between the various sampling sites inside the bay, which were both dominated by multidrug and (fluoro)quinolone resistance genes and harbored lower relative abundances of ARGs than those in the sampling sites near the bay exit. Compared with antibiotics and MGEs, bacterial community composition was a more important driver of ARG diversity and geographic distribution. The abundance of pathogens carrying genetic information increased dramatically in southern Jiaozhou Bay is affected by sewage discharge, which indicating that wastewater discharge facilitated ARG contamination of marine sediments. This study highlights the risk of disseminating antibiotic resistance-influencing factors from treated wastewater discharge into marine environment there is an urgent need to optimize or improve wastewater treatment processes to enhance the removal of antibiotics and ARGs. This study has necessary implications for filling the gap in information on antibiotic resistance in Jiaozhou Bay and developing future pollution regulation and control measures.

Recycling of Contaminated Marine Sediment and Industrial By-Products through Combined Stabilization/Solidification and Granulation Treatment.

Stabilization/solidification (S/S) is becoming increasingly important, as it allows the remediation of contaminated sediments and their recovery into materials for civil engineering. This research proposes a cement-free cold granulation process for manufactured low-cost aggregates from marine sediments contaminated with organic compounds and metals. After the chemo-physical characterization of the study materials, two mix designs were prepared in a rotary plate granulator by adding two industrial by-products as geopolymer precursors, coal fly ash (CFA) and Blast Furnace Slag (BFS), but also alkaline activation solutions, water, and a fluidizer. The results indicated that sediments treated with mix 1 (i.e., with a higher percentage of water and fluidifier) represent the optimal solution in terms of metal leachability. The metal leachability was strictly influenced by aggregates' porosity, density, and microstructure. The technical performance (such as the aggregate impact value > 30%) suggested the use of granules as lightweight aggregates for pavement construction. The results indicated that cold granulation represents a sustainable solution to recycling contaminated marine sediments, CFA, and BFS into lightweight artificial aggregates.

탄소중립을 위한 토지공법적 과제

The whole world is proclaiming carbon neutrality to prevent climate crisis. Korea itself announced of ‘2050 Carbon Neutrality Proclaim’ on October 28, 2020 and following this, ‘2050 Carbon Neutrality Vision’ on December 10. The carbon neutrality scenario is classified into emission, absorption and removal and as per absorption and removal, we may say CCUS is the key. Currently, individual acts such as Framework Act on Carbon Neutrality and Green Growth for Coping with Climate Crisis, Wastes Control Act, Management of Marine Garbage and Contaminated Marine Sediment Act, Act on Promotion of Technologies for Coping with Climate Change, Restriction of Special Taxation Act, etc. stipulate about CCUS. Therefore, we have discussed about how to make an unified act in order to control carbon dioxide efficiently and rationally. In the process of the discussion, we studied about the problem of the aspects of public land law. For example, there are typical problems such as; 1) determining the public interest about carbon dioxide, 2) determining the obligation of securing land for carbon capture process and establishment of direct air capture, and, and 3) evaluation of environment influence and accommodation of storage. CCUS is not the one and only technology but a variety of technologies by each phase of capture, transportation, storage, and utilization. Also, there are many related government departments including Ministry of Science and ICT, Ministry of Trade, Industry and Energy, Ministry of Environment, and Ministry of Oceans and Fisheries. This makes it a consolidated system issue. Therefore, an unified act is required to link all the problems together. Current proposal of the bill includes the way to solve the public land law aspect as; 1) stipulating the obligation of the person in charge of the capture to secure land, 2) expanding the scope of capture that will enable to capture carbon dioxide in everyday lives, 3) introducing reduction of charges for occupying and using public water surfaces, 4) preparing rules and regulations on safety control, 5) resident accommodations, etc.

탄소중립을 위한 토지공법적 과제

The whole world is proclaiming carbon neutrality to prevent climate crisis. Korea itself announced of ‘2050 Carbon Neutrality Proclaim’ on October 28, 2020 and following this, ‘2050 Carbon Neutrality Vision’ on December 10. The carbon neutrality scenario is classified into emission, absorption and removal and as per absorption and removal, we may say CCUS is the key. Currently, individual acts such as Framework Act on Carbon Neutrality and Green Growth for Coping with Climate Crisis, Wastes Control Act, Management of Marine Garbage and Contaminated Marine Sediment Act, Act on Promotion of Technologies for Coping with Climate Change, Restriction of Special Taxation Act, etc. stipulate about CCUS. Therefore, we have discussed about how to make an unified act in order to control carbon dioxide efficiently and rationally. In the process of the discussion, we studied about the problem of the aspects of public land law. For example, there are typical problems such as; 1) determining the public interest about carbon dioxide, 2) determining the obligation of securing land for carbon capture process and establishment of direct air capture, and, and 3) evaluation of environment influence and accommodation of storage. CCUS is not the one and only technology but a variety of technologies by each phase of capture, transportation, storage, and utilization. Also, there are many related government departments including Ministry of Science and ICT, Ministry of Trade, Industry and Energy, Ministry of Environment, and Ministry of Oceans and Fisheries. This makes it a consolidated system issue. Therefore, an unified act is required to link all the problems together. Current proposal of the bill includes the way to solve the public land law aspect as; 1) stipulating the obligation of the person in charge of the capture to secure land, 2) expanding the scope of capture that will enable to capture carbon dioxide in everyday lives, 3) introducing reduction of charges for occupying and using public water surfaces, 4) preparing rules and regulations on safety control, 5) resident accommodations, etc.

Microbiome enrichment from contaminated marine sediments unveils novel bacterial strains for petroleum hydrocarbon and heavy metal bioremediation

Petroleum hydrocarbons and heavy metals are some of the most widespread contaminants affecting marine ecosystems, urgently needing effective and sustainable remediation solutions. Microbial-based bioremediation is gaining increasing interest as an effective, economically and environmentally sustainable strategy. Here, we hypothesized that the heavily polluted coastal area facing the Sarno River mouth, which discharges >3 tons of polycyclic aromatic hydrocarbons (PAHs) and ∼15 tons of heavy metals (HMs) into the sea annually, hosts unique microbiomes including marine bacteria useful for PAHs and HMs bioremediation. We thus enriched the microbiome of marine sediments, contextually selecting for HM-resistant bacteria. The enriched mixed bacterial culture was subjected to whole-DNA sequencing, metagenome-assembled-genomes (MAGs) annotation, and further sub-culturing to obtain the major bacterial species as pure strains. We obtained two novel isolates corresponding to the two most abundant MAGs (Alcanivorax xenomutans strain-SRM1 and Halomonas alkaliantarctica strain-SRM2), and tested their ability to degrade PAHs and remove HMs. Both strains exhibited high PAHs degradation (60–100%) and HMs removal (21–100%) yield, and we described in detail >60 genes in their MAGs to unveil the possible genetic basis for such abilities. Most promising yields (∼100%) were obtained towards naphthalene, pyrene and lead. We propose these novel bacterial strains and related genetic repertoire to be further exploited for effective bioremediation of marine environments contaminated with both PAHs and HMs.

How to Achieve Sustainably Beneficial Uses of Marine Sediments in Colombia?

Marine sediments may easily accumulate contaminants, posing a high risk to human health and biota. Beneficial use applications exist for natural sediments and sediments contaminated with organic and inorganic pollutants. In this research, the term marine sediments (MSs) was used to refer to all marine sediments, which could be clean, natural marine sediments, as well as contaminated marine sediments and dredged materials, as the main focus of this research. Sediment remediation often involves costly and time-consuming processes. Assessment frameworks are essential for selecting suitable remediation alternatives for MSs. This research aims to provide regulatory frameworks for the sustainable beneficial use of all marine sediments. No studies have been reported on this issue in Colombia until now. The current states of marine sediments on the Colombian Caribbean Coast were mainly investigated. Concentrations of specific harmful heavy metals (HHMs) in Colombia’s sediments were higher than the environmental standards of various nations. Ex situ remediation technologies were evaluated through cost–benefit analysis and environmental feasibility to be adopted in Colombia. The results identified solidification/stabilization (S/S) as promising technologies. Sustainable remediation of MSs may offer ample opportunities for environmental enhancement and economic benefits. Continuous research and adopting appropriate environmental regulations, such as the London Protocol 1996, would contribute to effectively managing all marine sediments in Colombia. More innovative and cost-effective remediation technologies with beneficial uses would still be needed. Decision makers may use the proposed frameworks to select optimal remediation alternatives and implement sustainable MSs management by achieving their beneficial uses.

Spatial variability of water quality and sedimentary organic matter during winter season in coastal aquaculture zone of Korea

We investigated the composition, source, and reactivity of sedimentary organic matter (OM) present in aquaculture systems along the Korean coast. A multi-isotopic approach was applied to 216 surface sediments from five sections: western (W)-1, W-2, southern (S)-1, S-2, and eastern (E)-1 sections. The 15N-enriched total nitrogen signatures in the surface sediments of the W-1 section may indicate that a substantial fraction of sedimentary OM has anthropogenic origins exported through the Han River. Simultaneously, the deposition of allochthonous OM is predominant in the S sections (Jinhae and Masan Bays). The 34S-depleted patterns at the S-2 section may indicate that sulfate reduction occurring at the sedimentary boundary contributes to active OM decomposition, depending on the increased sedimentation of the aquaculture-derived OM. Our results highlight that isotopic-based source tracking near aquaculture systems provide important information for identifying anthropogenic contamination in coastal marine sediments and for improving environmental management.

Bioavailable actinide fluxes to the Irish Sea from Sellafield-labelled sediments

Nuclear discharges to the oceans have given rise to significant accumulations of radionuclides in sediments which can later remobilise back into the water column. A continuing supply of radionuclides to aquatic organisms and the human food chain can therefore exist, despite the absence of ongoing nuclear discharges. Radionuclide remobilisation from sediment is consequently a critical component of the modelled radiation dose to the public. However, radionuclide remobilisation fluxes from contaminated marine sediments have never been quantitatively determined in-situ to provide a valid assessment of the issue. Here, we combine recent advances in the Diffusive Gradients in Thin Films (DGT) sampling technique with ultrasensitive measurement by accelerator mass spectrometry (AMS) to calculate the remobilisation fluxes of plutonium, americium and uranium isotopes from the Esk Estuary sediments (UK), which have accumulated historic discharges from the Sellafield nuclear reprocessing facility. Isotopic evidence indicates the local biota are accumulating remobilised plutonium and demonstrates the DGT technique as a valid bioavailability proxy, which more accurately reflects the elemental fractionation of the actinides in the biota than traditional bulk water sampling. These results provide a fundamental evaluation of the re-incorporation of bioavailable actinides into the biosphere from sediment reservoirs. We therefore anticipate this work will provide a tool and point of reference to improve radiation dose modelling and contribute insight for other environmental projects, such as the near-surface and deep disposal of nuclear waste.

Reduction of Surface Tension of Petroleum Using Hydrocarbon Degrading Bacterial Activity

Hydrocarbon degrading bacteria produce biosurfactants, which facilitate the biodegradation process. This is the first step towards getting access to interactions between the bacteria's hydrophilic surface and the hydrophobic surface of the hydrocarbons. Due to their amphipathic nature, biosurfactants facilitate this interaction. The focus of the study is to obtain hydrocarbon-degrading bacteria isolates and evaluate biosurfactant activity in reducing water surface tension. Hydrocarbon-degrading bacteria were isolated from contaminated marine sediment samples and consequently cultured on artificial seawater media with the addition of petroleum hydrocarbons as a carbon source. Surface tension reduction of biosurfactants was measured using a digital K20-EasyDyne tensiometer (KRÜSS: Hamburg, Germany). The study indicates that the isolates have biodegradation activity and reduced water surface tension by 22.14 mN/m, the data demonstrated that biosurfactant production was most effective on the third day of the exponential phase incubation. These studies demonstrate the effectiveness of hydrocarbon-degrading bacteria to produce biosurfactants as biodegradation agents to solve the problem of oil pollution.

Fungi Can Be More Effective than Bacteria for the Bioremediation of Marine Sediments Highly Contaminated with Heavy Metals.

The contamination of coastal marine sediments with heavy metals (HMs) is a widespread phenomenon that requires effective remediation actions. Bioremediation based on the use of bacteria is an economically and environmentally sustainable effective strategy for reducing HM contamination and/or toxicity in marine sediments. However, information on the efficiency of marine-derived fungi for HM decontamination of marine sediments is still largely lacking, despite evidence of the performance of terrestrial fungal strains on other contaminated matrixes (e.g., soils, freshwater sediments, industrial wastes). Here, we carried out for the first time an array of parallel laboratory experiments by using different combinations of chemical and microbial amendments (including acidophilic autotrophic and heterotrophic bacteria, as well as filamentous marine fungi) for the bioremediation of highly HM-contaminated sediments of the Portman Bay (NW Mediterranean Sea), an area largely affected by long-term historical discharges of mine tailings. Our results indicate that the bioleaching performance of metals from the sediment is based on the addition of fungi (Aspergillus niger and Trichoderma sp.), either alone or in combination with autotrophic bacteria, was higher when compared to other treatments. In particular, fungal addition allowed obtaining bioleaching yields for As eight times higher than those by chemical treatments and double compared with the addition of bacteria alone. Moreover, in our study, the fungal addition was the only treatment allowing effective bioleaching of otherwise not mobile fractions of Zn and Cd, thus overtaking bacterial treatments. We found that the lower the sediment pH reached by the experimental conditions, as in the case of fungal addition, the higher the solubilization yield of metals, suggesting that the specific metabolic features of A. niger and Trichoderma sp. enable lowering sediment pH and enhance HM bioleaching. Overall, our findings indicate that fungi can be more effective than acidophilic autotrophic and heterotrophic bacteria in HM bioleaching, and as such, their use can represent a promising and efficient strategy for the bioremediation of marine sediments highly contaminated with heavy metals.

Bacterial community response to chronic heavy metal contamination in marine sediments of the East China Sea

Marine sediments act as a sink for various heavy metals, which may have profound impact on sedimentary microbiota. However, our knowledge about the collaborative response of bacterial community to chronic heavy metal contamination remains little. In this study, concentrations of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in sediments collected from the East China Sea were analyzed and Illumina Miseq 16 S rRNA sequencing was applied to characterize the structure of bacterial community. Microbiota inhabiting sediments in the East China Sea polluted with heavy metals showed different community composition from relatively pristine sites. The response of bacterial community to heavy metal stress was further interrogated with weighted correlation network analysis (WGCNA). WGCNA revealed ten bacterial modules exhibiting distinct co-occurrence patterns and among them, five modules were related to heavy metal pollution. Three of them were positively correlated with an increase in at least one heavy metal concentration, hubs (more influential bacterial taxa) of which were previously reported to be involved in the geochemical cycling of heavy metals or possess tolerance to heavy metals, while another two modules showed opposite patterns. Our research suggested that ecological functional transition might have occurred in East China Sea sediments by shifts of community composition with sensitive modules majorly involved in the meaningful global biogeochemical cycling of carbon, sulfur, and nitrogen replaced by more tolerant groups of bacteria due to long-term exposure to low-concentration heavy metals. Hubs may serve as indicators of perturbations of benthic bacterial community caused by heavy metal pollution and support monitoring remediation of polluted sites in marine environments.