Contamination Of Water Sources Research Articles

Silver-graphene oxide nanocomposite doping chitosan/PVA membrane for arsenic (III) elimination from aqueous solution

Abstract Heavy metals and pathogens from contaminated water sources may undoubtedly be removed by creating an efficient bio-adsorbent based on functional spots. Thus, the goal of this work was to produce chitosan (Ch)-polyvinyl alcohol (PVA) biofilm decorated with graphene oxide (GO) sheets doped with silver nanoparticles (AgNPs). The nanostructure of prepared GO/Ag nanosheets is examined by transmission electron microscope (TEM). The fabricated film (GO/Ag Ch-PVA) is compared by the control films (Ch, PVA and Ch-PVA). Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and tensile strength are used to study the films' structure. Also, the antimicrobial activity was assessed for the films. After doping the polymer matrix with GO/Ag, the obtained findings were compared to other control films, and it was discovered that the tensile strength increased to about 46.18 MPa. 
Moreover, the adsorption experiment for arsenic As (III) ions is explored by the prepared film at different operating conditions. The obtained results validated the enhanced adsorption ability of the GO/Ag Ch-PVA film towards As (III) with the highest adsorption capacity of 54.3 mg/g obtained from the isotherm model of Langmuir. Moreover, kinetic mathematical models for the adsorption effectiveness of GO/Ag Ch-PVA film are proposed. The results gathered demonstrated that GO/Ag Ch-PVA film is a potentially useful material for eliminating As (III) and microbial strains from essential water resource applications. 

Simultaneous determination of eight neonicotinoid insecticides and five metabolites in water samples by liquid chromatography‐tandem mass spectrometry unveils an overlooked risk

AbstractNeonicotinoids (NEOs), highly selective toward insect nicotinic acetylcholine receptors, are extensively used due to their effectiveness against pests and relative non‐toxicity to vertebrates. However, their prolonged persistence in soil and water has led to frequent detection in food and environmental samples, posing significant environmental and health concerns. Recent research indicates these pesticides infiltrate aquatic ecosystems, threatening aquatic life and human health. Here, we improved the ultra‐performance liquid chromatography‐mass spectrometry method for detecting NEOs in water samples, increasing its sensitivity to fulfill forthcoming detection needs. This approach enables the simultaneous quantification of eight NEOs and five NEO metabolites in diverse water sources, including tap, surface, groundwater, sewage, and seawater. Our method achieves remarkably low detection limits for direct injection (0.78–1.7 ng/L) and solid‐phase extraction methods (0.13–0.25 ng/L). Critically, our findings reveal that boiling domestic drinking water doesn't degrade NEOs; instead, it increases their concentration due to water evaporation. A 6‐min boiling period can amplify pesticide concentration by 4–5 times, presenting a significant hazard in culinary practices of specific regions where prolonged cooking could lead to alarmingly high levels of these insecticides. This research underscores the importance of monitoring and mitigating NEO contamination in water sources to safeguard environmental and public health.

Assessment of Heavy Metal and E. coli Contamination in Water Sources of the East and South Districts, Sikkim Himalaya, India

Assessment of Heavy Metal and E. coli Contamination in Water Sources of the East and South Districts, Sikkim Himalaya, India

Enhancing trimethoprim pollutant removal from wastewater using magnetic metal-organic framework encapsulated with poly (itaconic acid)-grafted crosslinked chitosan composite sponge: Optimization through Box-Behnken design and thermodynamics of adsorption parameters

Trimethoprim (TMP), an antibiotic contaminant, can be effectively removed from water by using the innovative magnetic metal-organic framework (MOF) composite sponge Fe3O4@Rh-MOF@PIC, which is shown in this study. The composite is made up of magnetite (Fe3O4) nanoparticles and a rhodium MOF embedded in a poly(itaconic acid) grafted chitosan matrix. The structure and characteristics of the synthesized material were confirmed by thorough characterization employing SEM, FTIR, XPS, XRD, and BET techniques. Notably, the composite shows a high magnetic saturation of 64emug-1, which makes magnetic separation easier, according to vibrating sample magnetometry. Moreover, BET analysis revealed that the Fe3O4@Rh-MOF@PIC sponge had an incredibly high surface area of 1236.48m2/g. Its outstanding efficacy was confirmed by batch adsorption tests, which produced a maximum adsorption capacity of 391.9mg/g for the elimination of TMP. Due to its high porosity, magnetic characteristics, and superior trimethoprim uptake, this magnetic MOF composite sponge is a promising adsorbent for effective removal of antibiotics from contaminated water sources. An adsorption energy of 24.5kJ/mol was found by batch investigations on the Fe3O4@Rh-MOF@PIC composite sponge for trimethoprim (TMP) adsorption. The fact that this value was up 8kJ/mol suggests that the main mechanism controlling TMP absorption onto the sponge adsorbent is chemisorption. Chemisorption requires creating strong chemical interactions between adsorbate and adsorbent surface groups, unlike weaker physisorption. The magnetic composite sponge exhibited strong removal capabilities and high adsorption capacities for the antibiotic pollutant. The Fe3O4@Rh-MOF@PIC composite sponge also showed magnetism, which allowed for easy magnetic separation after adsorption. Over the course of 6cycles, it showed outstanding reusability, and XRD confirmed that its composition was stable. The high surface area MOF's pore filling, hydrogen bonding, π-π stacking, and electrostatic interactions were the main trimethoprim adsorption mechanisms. This magnetic composite is feasible and effective for removing antibiotics from water because of its separability, reusability, and synergistic adsorption mechanisms via electrostatics, H-bonding, and π-interactions. The adsorption results were optimized using Box Behnken-design (BBD).

Assessment of physicochemical, minerals and microbiological qualities of borehole and well water: A case study of Akure Metropolis, Nigeria

Groundwater constitutes a substantial reservoir of fresh water utilized for agricultural irrigation and drinking, emphasizing the critical importance of safeguarding its availability and quality. Contamination of groundwater can arise from chemical, physical, or microbiological sources, each contributing to various health-related issues. In the region of FUTA Southgate, Southwest Nigeria, an assessment was conducted on the physicochemical and microbiological characteristics of groundwater from hand-dug wells and boreholes to ascertain its suitability for human consumption. The analysis indicated that parameters such as BOD, DO TS, TH, and nitrate content were within the acceptable limits set by the World Health Organization (WHO) and the Nigerian Standard for Drinking Water Quality (NSDQ). However, the presence of heavy metals like Fe, Cu, Cr, Pb, Mn, Cd, and Zn was detected using an atomic absorption spectrometer, revealing a slight level of contamination in both water sources. Furthermore, microbiological examination identified Total Coliform Counts of 382 cfu and 159 cfu in hand-dug wells and boreholes, respectively, indicating fecal contamination. The findings suggest that inadequate sewage systems and improper waste disposal practices contribute to the compromised water quality and elevated nitrate levels in hand-dug wells, rendering the shallow aquifer groundwater unsafe for drinking purposes across all evaluated parameters. Consequently, appropriate treatment and disinfection measures are imperative before utilizing the contaminated borehole and groundwater wells for human consumption or industrial purposes.

An integrated study of dual membrane techniques for the removal of disinfection by-products in drinking water

In the context of escalating global water resource pressures and rising populations, ensuring the quality and safety of water supplies has become paramount. Natural Organic Matter (NOM) and Disinfection By-Products (DBPs) are prevalent contaminants in numerous water sources. Their presence compromises waters sensory qualities, but certain DBPs have been substantiated to be associated with diverse health implications, including carcinogenic risks. Hence, developing efficient, cost-effective, and reliable technologies for their removal is of critical significance. Dual-membrane filtration, an emergent water treatment methodology, demonstrates profound potential in addressing NOM and DBPs.This article offers a comprehensive review of the applications of dual-membrane filtration across various water treatment paradigms, underscoring its pivotal role in safeguarding potable water quality and addressing future water quality challenges. This study reveals that the MF-NF membrane achieves a removal rate of disinfection by-products of approximately 70%-80%. The UF-NF membrane presents an overall UV254 removal efficiency of over 90%. The NF-RO membrane demonstrates removal efficiencies exceeding 89% for trichloromethane and halogenated acetic acid formation potential. Future research should focus on optimizing the performance of dual-membrane systems, investigating novel membrane materials, and assessing the removal efficiency for emerging DBPs.

Identification of Multiple Surface Water Contamination Sources Based on UV–Vis Spectral Unmixing with Turbidity Adaptiveness

Identification of Multiple Surface Water Contamination Sources Based on UV–Vis Spectral Unmixing with Turbidity Adaptiveness

A novel photocatalytic activity of Bi2S3 nanoparticles for pharmaceutical and organic pollution removal in water remediation

In recent times, there has been a surge of interest in the unique characteristics and possible applications of nanoparticles in various fields, including environmental clean-up. The contamination of water sources with pharmaceutical and organic substances has emerged as a significant environmental concern. Semiconductor nanoparticles, particularly Bi2S3 nanoparticles, have garnered considerable attention due to their efficacy and environmentally friendly nature in advanced oxidation processes (AOPs). These nanoparticles have shown remarkable photocatalytic abilities in the destruction of pollutants when exposed to UV–visible light. This study covers the production, characterization, and degradation of Bi2S3 nanoparticles in relation to organic and pharmaceutical contaminants. By utilizing co-precipitate methods, it becomes possible to precisely manipulate the size, shape, and composition of the nanoparticles, which are crucial factors in determining their catalytic effectiveness. The created nanoparticles are then examined using various analytical techniques, such as Powder X-ray Diffraction (P-XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible spectroscopy, Photoluminescence study (PL), colour chromaticity coordinates (CIE), and Dynamic light scattering study (DLS). The catalytic capability of the synthesised compounds was compared to the degradation of Picric acid and paracetamol as model pollutants. The observed photocatalytic activity of these nanoparticles indicates their potential in water purification and environmental clean-up. The findings suggest that incorporating these nanoparticles into practical systems for pollutant degradation is feasible and can be applied in diverse scenarios. The results shed light on the efficient utilization of Bi2S3 nanoparticles as photocatalysts for the oxidation of drugs and organic contaminants. By utilizing Bi2S3 nanoparticles, the elimination of pharmaceutical and organic pollutants from water sources becomes achievable, thereby contributing to the preservation and safeguarding of the environment and public health.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review.

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Water-Based Epidemiological Investigation of Hepatitis E Virus in South Africa.

Hepatitis E virus (HEV) is an emerging zoonotic pathogen that exhibits great host diversity. The primary means of transmission of the virus in low- and middle-income countries is contaminated water, often due to a lack of access to proper sanitation, which leads to faecal contamination of water sources. Environmental surveillance is an important tool that can be used to monitor virus circulation and as an early warning system for outbreaks. This study was conducted to determine the prevalence and genetic diversity of HEV in wastewater, surface water (rivers and standpipe/ablution water), and effluent from a piggery in South Africa. A total of 536 water samples were screened for HEV using real-time reverse transcription-polymerase chain reaction. Overall, 21.8% (117/536) of the wastewater, river, and ablution water samples tested positive for HEV, whereas 74.4% (29/39) of the samples from the piggery tested positive. Genotyping revealed sequences belonging to HEV genotypes 3 (98%, 53/54) and 4 (2%, 1/54), with subtypes 3c, 3f, and 4b being identified.

Chemical Farming, Emerging Issues of Chemical Farming

Chemical farming, an essential element of modern agriculture, has considerably increased global food production while also posing a number of difficult challenges, most notably those related to environmental sustainability, human health, and water resource integrity. This research project will conduct a thorough examination of these multifaceted issues, investigating the negative environmental consequences of chemical farming practices, determining the associated health risks to human populations, and examining the widespread contamination of water sources. This paper aims to shed light on the complicated connection between chemical farming and its emergent consequences by making use of doctrinal data, academic discussion, and policy insights, as well as exploring viable strategies and alternative approaches to mitigate these negative effects and advance the adoption of sustainable agricultural paradigms.

Synthesis of biochar-ZnAl-layered double hydroxide composite for effective heavy metal adsorption: Exploring mechanisms and structural transformations

Rapid industrialization has increased the extent of heavy metal contamination in water sources, demanding effective wastewater treatment methods. To mitigate this issue, adsorption techniques play a crucial role in wastewater treatment. Layered double hydroxides (LDHs) are commonly employed in such processes; however, they exhibit limitations in effectively adsorbing contaminants. Here, biochar (BC) was incorporated into LDHs using a simple hydrothermal method and subsequently used for Cd2+ and Pb2+ adsorption. Additionally, the physicochemical characteristics of BC and ZnAl-LDH-BC were assessed utilizing various instruments. The obtained ZnAl-LDH-BC400 and ZnAl-LDH-BC600 had surface areas of 52.55 and 102.56 m²/g, respectively, several times greater than those of the original BC. Adsorption performance was investigated using different kinetic and isothermal models. The Langmuir–Freundlich and pseudo-second-order kinetic models demonstrated the adsorption of single-layer chemicals. Furthermore, the highest observed adsorption capacities for Cd2+ and Pb2+ were 99.8 mg g−1 and 128.4 mg g−1, respectively, when using ZnAl-LDH–BC600. In contrast, BC600 demonstrated adsorption capacities of 42.1 mg g−1 for Cd2+ and 51.7 mg g−1 for Pb2+. Cd2+ and Pb2+ adsorption by ZnAl-LDH-BC was primarily governed by surface precipitation and cation exchange processes. These findings highlight the mechanisms underlying the removal of heavy metals using ZnAl-LDH-BC and provide valuable theoretical and applied insights into the management of agricultural waste and control of water pollution.

The Interplay Between Household Risk Perception of Parasitic Infections and Water, Sanitation, and Hygiene (WASH) Practices: Evidence From an Urban Poor Community in the Philippines.

Parasitic diseases pose challenges in impoverished urban settlements with limited access to clean water, proper hygiene, and sanitation (WASH). This study assesses WASH practices and risk perceptions of parasitic infections among households in the Bataan Shipyard and Engineering Corporation (BASECO) Compound in Manila, an urban poor community in the Philippines. A cross-sectional study design was employed to collect data through a self-administered questionnaire. Descriptive statistical analysis was performed to assess the sociodemographic profile, household WASH practices, and respondents' risk perception of parasitic infections. Linear regression analysis was utilized to examine the relationship between these variables. A survey was conducted with 363 households, of which 237 (65.3%) used distilled and purified water from the water refilling stations in the community for drinking. Meanwhile, 120 households (33.10%) consumed tap water. Boiling water was a commonly used method (n=146; 56.60%) for treating drinking water. Most households had flush toilets with septic tanks (n=244; 67.20%), water sources for handwashing (n=307; 84.57%) and soap for handwashing (n=356; 98.10%). On average, they washed their hands 6-10 times daily (n=159; 43.80%). Most households were aware that drinking untreated water (n=318; 87.6%), improper food washing (n=309; 85.1%), using contaminated water sources (n=301; 82.9%), and consuming raw or undercooked meat (n=298; 82.1%) could lead to parasitic infections. 316 respondents (87.1%) identified diarrhea as the most common symptom of parasitic infection. Relationships were found between access to drinking water and the number of household members (B=0.191; p-value=0.001), personal hygiene and the respondents' knowledge of parasitic infections (B=0.112; p-value=0.047), and the overall WASH score with household income (B=0.105; p-value=0.045). The WASH conditions in BASECO, Manila need improvement. Factors associated with their WASH practices include risk perception of parasitic diseases, socioeconomic disparity, and household overcrowding. These factors play a crucial role in identifying areas for improvement and promoting health policies for urban poor communities in the Philippines.

Thiol-functionalized cellulose for mercury polluted water remediation: Synthesis and study of the adsorption properties

Mercury pollution poses a global health threat due to its high toxicity, especially in seafood where it accumulates through various pathways. Developing effective and affordable technologies for mercury removal from water is crucial. Adsorption stands out as a promising method, but creating low-cost materials with high selectivity and capacity for mercury adsorption is challenging.Here we show a sustainable method to synthesize low-cost sulfhydrylated cellulose with ethylene sulfide functionalities bonded glucose units. Thiol-functionalized cellulose exhibits exceptional adsorption capacity (1325 mg g−1) and selectivity for Hg(II) over other heavy metals (Co, Cu, Zn, Pb) and common cations (Ca++, Mg++) found in natural waters. It performs efficiently across a wide pH range and different aqueous matrices, including wastewater, and can be regenerated and reused multiple times without significant loss of performance. This approach offers a promising solution for addressing mercury contamination in water sources.

Removal of antibiotic sulfamethoxazole in water using rapid growing ZnO nanorod

The primary objective of this research is to synthesize ZnO vertical nanorods on a conductive substrate through a novel approach. In this method, ZnO nanorods are grown on kanthal wires using the direct heating (DH) technique. The study investigated the application of ZnO nanorods in photodegradation, specifically in removing Sulfamethoxazole (SMX). Through comprehensive analysis techniques, including XRD, FESEM, and TEM, the successful growth of ZnO nanorods on kanthal wires is confirmed. Their photocatalytic activity in SMX degradation is evaluated at varying concentrations (3 ppm, 5 ppm, 10 ppm) under UV light. Notably, the ZnO sample produced under 80 W power and 120 min emerges as the most promising, exhibiting a high surface area of 36 m2g-1, larger length of 755 nm, and lower diameter of 12 nm, as well as superior SMX photodegradation percentages of 87.64 % (3 ppm), 77.86 % (5 ppm), and 51.84 % (10 ppm) after 60 min. These findings highlight the potential of synthesizing ZnO nanorods via DH technique as an efficient and sustainable solution for removing pharmaceutical contamination in water sources.

Presence of microplastics in the groundwater of volcanic islands, El Hierro and La Palma (Canary Islands)

The increasing amount of plastic litter worldwide is a serious problem for the environment and its biodiversity, ecosystems, animal and human welfare and the economy. The degradation of these plastics leads to microplastics (MPs), which have been reported for the first time in groundwater in the Canary archipelago. This research investigates the presence of MPs at nine different points on La Palma and El Hierro, where samples were collected in galleries, wells and springs during the month of December 2022. Six different polymers were found with Fourier transform infrared spectroscopy (FTIR) – polypropylene (PP), polyethylene (PE), cellulose (CEL), polyethylene terephthalate (PET), polystyrene (PS) and polymethyl methacrylate (PMMA). The particle concentrations found ranged from 1 to 23 n/L, with a maximum particle size of 1900 μm, the smallest being 35 μm. PP and PE were the most common polymers found in the analysis, associated with the use of packaging, disposable products, textiles and water pipes, related to poorly maintained sewerage networks where leaks occur, allowing these MPs to escape into the environment and end up in groundwater. The detection of microplastic pollution in groundwater emphasises environmental hazards, including biodiversity disruption and water source contamination. Additionally, it presents potential risks to human health by transferring contaminants into the food chain and through respiratory exposure.

The removal of methylene blue from aqueous solutions by polyethylene microplastics: Modeling batch adsorption using random forest regression

In light of the extensive contamination of water sources by microplastics, their substantial specific surface area makes them favorable candidates as adsorbents for the simultaneous removal of coexisting contaminants in wastewater. In this regard, polyethylene microplastics were utilized to eliminate methylene blue dye from water. MB adsorption onto microplastics reached equilibrium in just 30 min at pH 7. The better fit of fractional power and Redlich-Peterson models on kinetic and equilibrium adsorption data, respectively, revealed that the MB removal process is a chemisorption in multilayer adsorption on the heterogeneous surface of the microplastics particles. The reusability of the microplastics adsorbent was confirmed based on the promising outcomes observed after five cycles. The results of the random forest regression exhibited an R2 of 97.55% for the correlation between the model-computed and measured amounts of MB reduction. The sensitivity analysis illustrated that the MB sorption process on microplastics is highly influenced by the initial MB concentration and adsorbent mass. These results show that although microplastics may pose potential risks to water environments, their adsorption potential can be utilized to simultaneously omit other pollutants from the aqueous solutions.

Urban Sanitation in al-Andalus: The Case of Qurṭuba (Tenth to Thirteenth Century)

ABSTRACT This article presents a comprehensive examination of sanitation practices in Islamic Cordoba and al-Andalus; it highlights the importance of hygiene at both the domestic and the community level. The focus is on waste disposal methods, particularly the use of cesspits and the implementation of sewer systems. The article explores sanitation practices in intramural areas, where a sanitary network was constructed, as well as in extramural areas, where cesspits were used, and sometimes older hydraulic structures were repurposed for waste management. The role of professional cleaners in these cities is also investigated, along with the mechanisms used to preserve water quality and prevent contamination of underground water sources.

Long Short-Term Memory and Bidirectional Long Short-Term Memory Modeling and Prediction of Hexavalent and Total Chromium Removal Capacity Kinetics of Cupressus lusitanica Bark

Hexavalent chromium [Cr(VI)] is a high-priority environmental pollutant because of its toxicity and potential to contaminate water sources. Biosorption, using low-cost biomaterials, is an emerging technology for removing pollutants from water. In this study, Long Short-Term Memory (LSTM) and bidirectional LSTM (Bi-LSTM) neural networks were used to model and predict the kinetics of the removal capacity of Cr(VI) and total chromium [Cr(T)] using Cupressus lusitanica bark (CLB) particles. The models were developed using 34 experimental kinetics datasets under various temperature, pH, particle size, and initial Cr(VI) concentration conditions. Data preprocessing via interpolation was implemented to augment the sparse time-series data. Early stopping regularization prevented overfitting, and dropout techniques enhanced model robustness. The Bi-LSTM models demonstrated a superior performance compared to the LSTM models. The inherent complexities of the process and data limitations resulted in a heavy-tailed and left-skewed residual distribution, indicating occasional deviations in the predictions of capacities obtained under extreme conditions. K-fold cross-validation demonstrated the stability of Bi-LSTM models 38 and 43, while response surfaces and validation with unseen datasets assessed their predictive accuracy and generalization capabilities. Shapley additive explanations analysis (SHAP) identified the initial Cr(VI) concentration and time as the most influential input features for the models. This study highlights the capabilities of deep recurrent neural networks in comprehending and predicting complex pollutant removal kinetic phenomena for environmental applications.

SOURCES OF POLLUTION OF SURFACE WATERS, DEVELOPMENT OF RECOMMENDATIONS FOR THEIR DETECTION AND DEVELOPMENT OF PREVENTION METHODS

The problem of water pollution is becoming more and more urgent for the whole world. Unfortunately, Georgia is not an exception, where water sources, despite their number, are small and a significant part of them is polluted. Unlike contamination of industrial wastewater treatment plants, which comes from multiple diffuse sources, biological contamination results from the movement of precipitation or snowmelt onto and into the soil. As runoff moves, it collects and transports natural and anthropogenic pollutants and deposits them in rivers, groundwater, or lakes. Special attention should be paid to the biological pollution of water sources, which occurs as a result of washing or flushing of sources of anthropogenic biological pollution with rain and melt water. After entering the water environment, under favorable conditions, pathogenic organisms can multiply rapidly, which poses a threat to the environment. Contamination of water sources is a major cause of water quality problems. The impact of source water contaminants on specific waters varies and cannot always be fully assessed. However, we know that these pollutants have harmful effects on drinking water supplies and wildlife. That is why it is necessary to find the source of biological pollution of water in order to develop an effective method of its elimination.