Contact Killing Research Articles

Salt-Responsive Switchable Block Copolymer Brushes with Antibacterial and Antifouling Properties.

A strategy for multifunctional biosurfaces exploiting multiblock copolymers and the antipolyelectrolyte effect is reported. Combining a polyzwitterionic/antifouling and a polycationic/antibacterial block with a central anchoring block for attachment to titanium oxide surfaces affords surface coatings that exhibit antifouling properties against proteins and allow for surface regeneration by clearing adhering proteins by employing a salt washing step. The surfaces also kill bacteria by contact killing, which is aided by a nonfouling block. The synthesis of block copolymers of 4-vinyl pyridine (VP), dimethyl 4-vinylbenzyl phosphonate (DMVBP), and 4-vinylbenzyltrimethyl ammonium chloride (TMA) is achieved on the multigram scale via RAFT polymerization with good end group retention and narrow dispersities. By polymer analogous reactions, poly(4-vinyl pyridinium propane sulfonate-block-4-vinylbenzyl phosphonic acid-block-4-vinylbenzyl trimethylammonium chloride) (P(VSP64-b-PA14-b-TMA64)) is obtained. The antifouling properties against the model protein pepsin and the salt-induced surface regeneration are shown in surface plasmon resonance (SPR) experiments, while independently the antibacterial and antifouling properties of coated titanium substrates are successfully tested in preliminary microbiological assays against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). This strategy may contribute to the development of long-term effective antibacterial implant surface coatings to suppress biomedical device-associated infections.

Photothermal-Induced Multimodal Antibacterial Dressing Comprising N-Halamine Hydrogel Loaded with Cow Dung Biochar for Infected Wound Healing.

Disposal of the cow dung pollutants arising from cattle farming threatens the environment and public safety in diverse ways. To date, researchers have worked on developing new pathways to control and manage cattle farming wastes, but most do not involve the reuse of these wastes. Herein, a cow dung biochar-modulated photothermal N-halamine hydrogel (i.e., PAN/CA/CoBC/pMAG-Cl) was designed for converting cow dung into biochar (CoBC), which was then coupled with a 3D interpenetrating hydrogel network to treat infected wounds. The PAN/CA/CoBC/pMAG-Cl hydrogel exhibited excellent synergistic antibacterial performance against 106 CFU·mL-1 Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) within 60 min. The bactericidal effect was multimodal, involving CoBC-based photothermal killing (i.e., temperature as high as 80.5 °C) after 808 nm near-infrared light irradiation for 10 min, contact killing through the strong oxidative characteristic of N-halamine (pMAG-Cl), and release killing via active halogens (i.e., Cl+) reinforced by the photothermal action of CoBC. The S. aureus-infected wound model in vivo demonstrated that the PAN/CA/CoBC/pMAG-Cl hydrogel worked as an ideal wound dressing, capable of resisting bacterial infection, accelerating the healing process, and promoting epithelial regeneration. This proposed strategy could indicate a new way for the disposal of cow dung pollutant and its reuse in antibacterial-associated applications.

A multifunctional hydrogel dressing loaded with antibiotics for healing of infected wound

Wound bacterial infections can significantly delay the healing process and even lead to fetal sepsis. There is a need for multifunctional dressings that possess antibacterial property, tissue adhesive property, self-healing capability, and biocompatibility to effectively treat bacteria-infected wound. In this study, we report a dual dynamically crosslinked hydrogel, OHA-PBA/PVA/Gen, which incorporates the antibiotic gentamicin (Gen) as a dynamic crosslinker. The hydrogel is formed through the formation of Schiff base bonds between phenylboronic acid-grafted oxidized hyaluronic acid (OHA-PBA) and Gen, as well as boronic acid ester bonds between OHA-PBA and polyvinyl alcohol (PVA). This unique composition imparts tissue adhesiveness, injectability and self-healing property to the hydrogel. The hydrogel also exhibits pH-responsive antibiotic release behavior due to the acid-responsive dissociation of Schiff base bonds. As a result, it demonstrates strong antibacterial activity against both Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli through contact killing and diffusion killing mechanisms. Importantly, the OHA-PBA/PVA/Gen hydrogel avoids incorporation of toxic small molecular crosslinking agents, and all the components of the hydrogel are biocompatible, ensuring its biosafety. In a S. aureus-infected wound mouse model, this hydrogel effectively eradicated bacteria and promoted angiogenesis, leading to significantly accelerated wound healing. These results highlight the potential of the dual dynamically crosslinking hydrogel OHA-PBA/PVA/Gen as a multifunctional wound dressing for the treatment of bacteria-infected wound.

Exploring Biosurfactants as Antimicrobial Approaches.

Antibacterial resistance is one of the most important global threats to human health. Several studies have been performed to overcome this problem and infection-preventive approaches appear as promising solutions. Novel antimicrobial preventive molecules are needed and microbial biosurfactants have been explored in that scope. Considering their structure, these biomolecules can be divided into different classes, glycolipids and lipopeptides being the most studied. Besides their antimicrobial activity, biosurfactants have the advantage of being biocompatible, biodegradable, and non-toxic, which favor their application in several areas, including the health sector. Often, the most difficult infections to fight are associated with biofilm formation, particularly in medical devices. Strategies to overcome micro-organism attachment are thus emergent, and it is possible to take advantage of the antimicrobial/antibiofilm properties of biosurfactants to produce surfaces that are more resistant to the deposition/attachment of bacteria. Approaches such as the covalent bond of biosurfactants to the medical device surface leading to repulsive physical-chemical interactions or contact killing can be selected. Simpler strategies such as the absorption of biosurfactants on surfaces are also possible, eliminating micro-organisms in the vicinity. This review will focus on the physical and chemical characteristics of biosurfactants, their antimicrobial activity, antimicrobial/antibiofilm approaches, and finally on their structure-activity relationship.

Development of antifouling antibacterial polylactic acid (PLA) -based packaging and application for chicken meat preservation

Microbial contamination is the leading cause of food spoilage and food-borne disease. Here, we developed a multifunctional surface based on polylactic acid (PLA) bioplastic with antifouling and antibacterial properties via a facile dual-coating approach. The surface was designed with hierarchical micro/nano-scale roughness and low surface energy. Bactericidal agent polyhexamethylene guanidine hydrochloride (PHMG) was incorporated to endow the film with bactericidal activity. The film had good superhydrophobic, antifouling and antibacterial performance, with a water contact angle of 154.3°, antibacterial efficiency against E. coli and S. aureus of 99.9 % and 99.6 %, respectively, and biofilm inhibition against E. coli and S. aureus of 63.5 % and 68.9 %, respectively. Synergistic effects of antibacterial adhesion and contact killing of bacteria contributed to the significant antibacterial performance of the film. The biobased biodegradable film was highly effective in preventing microbial growth when applied as antibacterial food packaging for poultry product, extending the shelf life of fresh chicken breast up to eight days.

Quaternary Ammonium Salts-Based Materials: A Review on Environmental Toxicity, Anti-Fouling Mechanisms and Applications in Marine and Water Treatment Industries.

The adherence of pathogenic microorganisms to surfaces and their association to form antibiotic-resistant biofilms threatens public health and affects several industrial sectors with significant economic losses. For this reason, the medical, pharmaceutical and materials science communities are exploring more effective anti-fouling approaches. This review focuses on the anti-fouling properties, structure-activity relationships and environmental toxicity of quaternary ammonium salts (QAS) and, as a subclass, ionic liquid compounds. Greener alternatives such as QAS-based antimicrobial polymers with biocide release, non-fouling (i.e., PEG, zwitterions), fouling release (i.e., poly(dimethylsiloxanes), fluorocarbon) and contact killing properties are highlighted. We also report on dual-functional polymers and stimuli-responsive materials. Given the economic and environmental impacts of biofilms in submerged surfaces, we emphasize the importance of less explored QAS-based anti-fouling approaches in the marine industry and in developing efficient membranes for water treatment systems.

Triple synergistic sterilization of Prussian blue nanoparticle-doped chitosan/gelatin packaging film for enhanced food preservation

To mitigate food spoilage caused by microbial contamination and extend the shelf life of food, antibacterial and eco-friendly biological packaging materials as an alternative to petroleum-based plastics is encouraged. Herein, an innovative and green composite film with triple antibacterial activity has been fabricated by introducing prussian blue nanoparticles (PBNPs) into chitosan (CS)-based films blended with gelatin (Gel) for the preservation of food, named CS/Gel/PB film. Due to the incorporation of PBNPs, CS/Gel/PB film exhibits enhanced mechanical, barrier and water resistance, and thermal abilities. The inherent bacterial trapping and killing capabilities of CS (contact killing), photothermal/photodynamic killing based on the excellent photothermal property of PBNPs under NIR irradiation synergistically facilitate the sterilization against Escherichia coli and Staphylococcus aureus (antibacterial ratio = 99.99 %). The film exhibits outstanding preservation capability in product storage, significantly extending the shelf life of strawberry and pork to 15 and 7 days, respectively. Meanwhile, the cytotoxicity assessment of CS/Gel/PB against HepG2 cells ascertains a cell viability exceeding 96 %, indicating a negligible toxicity level. Additionally, this film also exhibits superior biodegradability (preliminary degradation on the 10th day and completion on the 40th day) compared with PE film. Overall, these properties demonstrate great potential of CS/Gel/PB film as a novel packaging material.

Amphiphilic N-halamine copolymer antibacterial nanoparticles with hydrogen-donor and hydrogen-acceptor

Bacterial contamination in water bodies is potentially transmissible to humans, making water bodies a major pathway of bacterial transmission. However, existing hydantoin copolymer nanoparticles did not achieve the regulation of nanoparticle dispersion and particle size by adjusting the ratio of hydrogen-donors and hydrogen-acceptors. To tackle this issue, amphiphilic hydantoin copolymer nanoparticles (P(VBDH-BA-NVP)NPs) were synthesized by modulating hydrogen-donors and hydrogen-acceptors using emulsion polymerization, and amphiphilic N-halamine copolymer nanoparticles (P(ClV-BA-NVP)NPs) were subsequently prepared via chlorination treatment. Impressively, nanoparticle dispersion and particle size were modulated by adjusting the ratio of hydrogen-donors and hydrogen-acceptors. With the increase of nanoparticle dispersion and the decrease of particle size, the active chlorine content was gradually enlarged, and the antibacterial performance was progressively enhanced against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). More importantly, amphiphilic N-halamine copolymer nanoparticles with two-dimensional dispersing (2DD-P(ClV-BA-NVP)NPs) exhibited excellent antibacterial properties, which benefited from the dual coordination of direct contact killing and indirect release killing in aqueous medium. Through designing P(VBDH-BA-NVP)NPs with hydrogen bond interactions, this approach aims to achieve the constitutive relationship between the effective exposure of active sites and the antibacterial effect.

Design and Fabrication of Broad-Spectrum Antimicrobial Porous Metallo-Polymeric Microsphere for Water Disinfection.

An expedient and efficient approach is used to synthesize a new class of metallo-polymeric microspheres (MPMs) as antimicrobials to succumb the wide range of bacteria from water. Three types of MPMs, that is, poly[Silver (I)-methacrylate-co-methylmethacrylate] (pAgMA), poly[Copper (II)-methacrylate-co-methyl methacrylate] (pCuMA), and poly[Nickel (II)-methacrylate-co-methylmethacrylate] (pNiMA), are prepared via radical suspension polymerization technique in 3D shape with porous texture. The structural and morphological characterization of the prepared microspheres are examined by analytical techniques. The antimicrobial potentialities of prepared MPMs are investigated at the laboratory scale study, revealing that the MPMs exhibit strong antibacterial activity (≈99.9% killing) against Gram-negative and Gram-positive bacteria [Enterobacter hormaechei (EH), Bacillus megatarium (BM), and Bacillus bataviensis (BB)]. The MacConkey agar medium test reveals that MPMs have substantial biocidal efficacy against broad-spectrum Gram-negative bacteria present in tap water. The MPMs exhibit significant antimicrobial efficacy via contact killing owe to the presence of integrated biocidal metal moiety, which represents that the MPMs are safe for water disinfection.

Nanomedicine Remodels Tumor Microenvironment for Solid Tumor Immunotherapy.

Although immunotherapy is relatively effective in treating hematological malignancies, their efficacy against solid tumors is still suboptimal or even noneffective presently. Compared to hematological cancers, solid tumors exhibit strikingly different immunosuppressive microenvironment, severely deteriorating the efficacy of immunotherapy: (1) chemical features such as hypoxia and mild acidity suppress the activity of immune cells, (2) the pro-tumorigenic domestication of immune cells in the microenvironment within the solid tumors further undermines the effectiveness of immunotherapy, and (3) the dense physical barrier of solid tumor tissues prevents the effective intratumoral infiltration and contact killing of active immune cells. Therefore, we believe that reversing the immunosuppressive microenvironment are of critical priority for the immunotherapy against solid tumors. Due to their unique morphologies, structures, and compositions, nanomedicines have become powerful tools for achieving this goal. In this Perspective, we will first briefly introduce the immunosuppressive microenvironment of solid tumors and then summarize the most recent progresses in nanomedicine-based immunotherapy for solid tumors by remodeling tumor immune-microenvironment in a comprehensive manner. It is highly expected that this Perspective will aid in advancing immunotherapy against solid tumors, and we are highly optimistic on the future development in this burgeoning field.

Protein-Based Rechargeable and Replaceable Antimicrobial and Antifouling Coatings on Hydrophobic Food-Contact Surfaces.

The growing concerns regarding foodborne illnesses related to fresh produce accentuate the necessity for innovative material solutions, particularly on surfaces that come into close contact with foods. This study introduces a sustainable, efficient, and removable antimicrobial and antifouling coating ideally suited for hydrophobic food-contact surfaces such as low-density polyethylene (LDPE). Developed through a crosslinking reaction involving tannic acid, gelatin, and soy protein hydrolysate, these coatings exhibit proper stability in aqueous washing solutions and effectively combat bacterial contamination and prevent biofilm formation. The unique surface architecture promotes the formation of halamine structures, enhancing antimicrobial efficacy with a rapid contact killing effect and reducing microbial contamination by up to 5 log10 cfu·cm-2 against both Escherichia coli (Gram-negative) and Listeria innocua (Gram-positive). Notably, the coatings are designed for at least five recharging cycles under mild conditions (pH6, 20 ppm free active chlorine) and can be easily removed with hot water or steam to refresh the depositions. This removal process not only conveniently aligns with existing sanitation protocols in the fresh produce industry but also facilitates the complete eradication of potential developed biofilms, outperforming uncoated LDPE coupons. Overall, these coatings represent sustainable, cost-effective, and practical advancements in food safety and are promising candidates for widespread adoption in food processing environments.

Mechano‐Bactericidal Activities of Orthopedic Implants with Nanostructured Surfaces: Recent Advances and Prospects

AbstractOrthopedic surgery enables patients to regain the functions of lost or damaged bone tissues, but success is often compromised by highly prevalent surgery site infections (SSIs). To prevent SSIs and avoid superbugs, mechano‐bactericidal strategies are being developed to inactivate bacteria on nanostructured surfaces based on contact killing. The antibacterial mechanism of nanostructured surfaces stems from the physical force exerted on the bacterial membrane while imposing lower lethality on host cells. Owing to the bactericidal ability and biocompatibility, mechano‐bactericidal approaches have become desirable in designing antibacterial surfaces for orthopedic implants. In this review, the latest advances in mechano‐bactericidal strategies are described by discussing three commercial orthopedic materials approved by the United States Food and Drug Administration: titanium, magnesium, and polyether‐ether‐ketone. The recent developments and requirements of these three types of biomaterials are presented, and the feasibility and future directions of mechano‐bactericidal surfaces are discussed.

Spatial constraints and stochastic seeding subvert microbial arms race.

Surface attached communities of microbes grow in a wide variety of environments. Often, the size of these microbial community is constrained by their physical surroundings. However, little is known about how size constraints of a colony impact the outcome of microbial competitions. Here, we use individual-based models to simulate contact killing between two bacterial strains with different killing rates in a wide range of community sizes. We found that community size has a substantial impact on outcomes; in fact, in some competitions the identity of the most fit strain differs in large and small environments. Specifically, when at a numerical disadvantage, the strain with the slow killing rate is more successful in smaller environments than in large environments. The improved performance in small spaces comes from finite size effects; stochastic fluctuations in the initial relative abundance of each strain in small environments lead to dramatically different outcomes. However, when the slow killing strain has a numerical advantage, it performs better in large spaces than in small spaces, where stochastic fluctuations now aid the fast killing strain in small communities. Finally, we experimentally validate these results by confining contact killing strains of Vibrio cholerae in transmission electron microscopy grids. The outcomes of these experiments are consistent with our simulations. When rare, the slow killing strain does better in small environments; when common, the slow killing strain does better in large environments. Together, this work demonstrates that finite size effects can substantially modify antagonistic competitions, suggesting that colony size may, at least in part, subvert the microbial arms race.

Green Synthesized Polymeric Iodophors with Thyme as Antimicrobial Agents.

Antimicrobial resistance (AMR) is a growing concern for the future of mankind. Common antibiotics fail in the treatment of microbial infections at an alarming rate. Morbidity and mortality rates increase, especially among immune-compromised populations. Medicinal plants and their essential oils, as well as iodine could be potential solutions against resistant pathogens. These natural antimicrobials abate microbial proliferation, especially in synergistic combinations. We performed a simple, one-pot synthesis to prepare our formulation with polyvinylpyrrolidone (PVP)-complexed iodine (I2), Thymus Vulgaris L. (Thyme), and Aloe Barbadensis Miller (AV). SEM/EDS, UV-vis, Raman, FTIR, and XRD analyses verified the purity, composition, and morphology of AV-PVP-Thyme-I2. We investigated the inhibitory action of the bio-formulation AV-PVP-Thyme-I2 against 10 selected reference pathogens on impregnated sterile discs, surgical sutures, cotton gauze bandages, surgical face masks, and KN95 masks. The antimicrobial properties of AV-PVP-Thyme-I2 were studied by disc diffusion methods and compared with those of the antibiotics gentamycin and nystatin. The results confirm AV-PVP-Thyme-I2 as a strong antifungal and antibacterial agent against the majority of the tested microorganisms with excellent results on cotton bandages and face masks. After storing AV-PVP-Thyme-I2 for 18 months, the inhibitory action was augmented compared to the fresh formulation. Consequently, we suggest AV-PVP-Thyme-I2 as an antimicrobial agent against wound infections and a spray-on contact killing agent.

Development of quaternary ammonium based acrylic copolymer antimicrobial coatings for polyurethane tracheoesophageal voice prostheses.

Tracheoesophageal voice prostheses (TEPs) are soft polymeric devices used to restore the voices of patients who have undergone total laryngectomy (TL). TEPs are implanted on the tracheoesophageal wall and come in direct contact with food, fluid and air. The environment of an implant is a budding ground for growth of microbes, leading to biofilm formation on the TEP surfaces. Biofilm formation is the leading cause of TEP failure because the biofilm affects its functioning by clogging the air passage over several weeks to a few months. Short useful lifespan of TEPs is a concern for patients undergoing total laryngectomy. To increase the useful lifespan of TEPs, it is imperative to prevent biofilm formation. This problem is addressed in the present study by developing a cationic crosslinked antimicrobial coating that prevents biofilm formation through contact killing. An acrylate-based tetracopolymer poly(methyl methacrylate [MMA]-co-nbutyl acrylate [BA]-co-dimethylaminoethyl methacrylate [DMAEMA]-co-2 hydroxyethyl methacrylate [HEMA]) was synthesized by free radical polymerization and was crosslinked by hexamethylene diisocyanate (THDI) trimer through urethane linkages. The crosslinked tetracopolymer coatings were subjected to quaternary ammonium formation through N-alkylation with iodooctane. Different variants of coatings were synthesized and the tetracopolymer with 22.5% MMA, 22.5% BA, 20% HEMA and 35% DMAEMA showed desirable results. The developed coatings were characterized and tested for safety as well as mechanical and antimicrobial efficacy. The final results showed that the developed coatings exhibited good cytocompatibility, haemocompatibility, mechanical properties and antimicrobial properties for 180 days against E. coli, S. aureus and C. albicans.

Recent Progress in antibacterial hydrogel coatings for targeting biofilm to prevent orthopedic implant-associated infections.

The application of orthopedic implants for bone tissue reconstruction and functional restoration is crucial for patients with severe bone fractures and defects. However, the abiotic nature of orthopedic implants allows bacterial adhesion and colonization, leading to the formation of bacterial biofilms on the implant surface. This can result in implant failure and severe complications such as osteomyelitis and septic arthritis. The emergence of antibiotic-resistant bacteria and the limited efficacy of drugs against biofilms have increased the risk of orthopedic implant-associated infections (OIAI), necessitating the development of alternative therapeutics. In this regard, antibacterial hydrogels based on bacteria repelling, contact killing, drug delivery, or external assistance strategies have been extensively investigated for coating orthopedic implants through surface modification, offering a promising approach to target biofilm formation and prevent OIAI. This review provides an overview of recent advancements in the application of antibacterial hydrogel coatings for preventing OIAI by targeting biofilm formation. The topics covered include: (1) the mechanisms underlying OIAI occurrence and the role of biofilms in exacerbating OIAI development; (2) current strategies to impart anti-biofilm properties to hydrogel coatings and the mechanisms involved in treating OIAI. This article aims to summarize the progress in antibacterial hydrogel coatings for OIAI prevention, providing valuable insights and facilitating the development of prognostic markers for the design of effective antibacterial orthopedic implants.

Microparticles as BDMDAC (Quaternary Ammonium Compound) Carriers for Water Disinfection: A Layer-by-Layer Approach without Biocide Release

This work studies the antimicrobial activity of benzyldimethyldodecyl ammonium chloride (BDMDAC)-coated microparticles with distinct morphological structures. Functionalized microparticles were prepared by the layer-by-layer (LbL) self-assembly technique on hydroxyapatite (Hap), calcium carbonate (CaCO3) and glass beads (GB) cores. All particles were characterized, before and after functionalization, by Fourier-Transform Infrared Spectroscopy (FTIR), Brunner–Emmett–Teller (BET) and Scanning Electron Microscopy (SEM) analyses. Antimicrobial activity was tested against planktonic Pseudomonas fluorescens. Planktonic bacteria were exposed to 100 mg/L, 200 mg/L and 400 mg/L of BDMDAC-coated microparticles for 240 min. This strategy promoted a complete bacteria reduction at 200 mg/L for Hap microparticles after 240 min. No release of biocide was detected through HPLC analyses during 2 weeks, suggesting that bacteria inactivation may be attributed to a contact killing mechanism.

Testing mechanical properties and degree of conversion of resin-based composite material containing contact killing antibacterial agent in comparison with fluoride composite resin

BackgroundA major drawback of resin composites is their tendency to accumulate microbial biofilms that can lead to secondary caries. The objective of this study was to compare the mechanical properties and the degree of conversion of commercial resin-based composite materials containing a contact-killing antibacterial agent, dimethylaminohexadecyl methacrylate (DMAHDM), at different concentrations, with a fluoride-releasing composite material. Materials and methodsFour groups were tested: Tetric N Ceram composite material (G1), Tetric Evo Ceram (G2), and Tetric N Ceram with the addition of contact-killing antibacterial agent DMAHDM at concentrations of 3% (G3) and 5% (G4). The mechanical properties, including flexural strength, elastic modulus, and Vickers microhardness and the degree of conversion were investigated. ResultsAdding 3 % and 5 % DMAHDM resulted in flexural strength values that were comparable to Tetric Evo Ceram. Tetric N Ceram was comparable to the group containing 3 % DMAHDM (p > 0.05). However, it was significantly greater when compared to Tetric Evo Ceram (93.3 ± 9.4) and 5 % DMAHDM (p < 0.05). Both the elastic modulus and Vickers microhardness values of Tetric N Ceram were significantly higher than those of the other groups (p < 0.05). Furthermore, the elastic modulus of Tetric Evo Ceram showed similar results to groups with 3 % and 5 % DMAHDM. Nevertheless, the Vickers microhardness value is significantly higher when compared to 5 % DMAHDM (0.394 ± 0.021) (p < 0.05) while it was comparable to that of 3 % DMAHDM (0.484 ± 0.016) (p > 0.05). There was no statistically significant difference in the degree of conversion between the groups (p > 0.05). ConclusionAdding 3% DMAHDM to Tetric N Ceram resulted in flexural strength values that were similar to those of Tetric N Ceram and Tetric Evo Ceram. DMAHDM did not affect the degree of conversion of Tetric N Ceram composite.

Biofilm inhibition on natural rubber by hydrophilic modification using carboxymethyl chitosan stabilised high energy faceted silver nanoparticles

Intense bacterial infections have evolved into an immediate public and clinical health crisis, and medical devices are demanded to treat biofilm-mediated infections. It remains a challenge in medical products to eliminate pathogenic organisms despite documented protocols for cleaning and sanitizing surfaces. Silver nanoparticles have appeared as a favourable prospect to fight the rise of bacteria. The present article depicts the synthesis of carboxymethyl chitosan (CMC) stabilised anisotropic silver nanoparticles and their antimicrobial and antibiofilm activities. The dichlorofluorescein diacetate (DCF-DA) test against Staphylococcus aureus authenticated the reactive oxygen species (ROS) mediated antibacterial action of the nanoparticle. The silver nanoparticles were coated on natural rubber, and the surface properties of silver attached natural rubber developed by simple immersion were assessed using elemental analysis and inductively coupled plasma mass-spectrometry. The coated rubber film exhibits antibacterial properties with significant biofilm removal of 50.64% E. coli, 40.28% S. aureus and 33.87% P. aeruginosa with lower bacterial adhesion along with contact killing efficiency. The developed material can be used in rubber-based medical devices; thus provides a protective shield against bacteria, especially in the hospital field.

Time-dependent plastic behavior of bacteria leading to rupture

A study of the mechanical response of bacteria is essential in designing an antibacterial surface for implants and food packaging applications. This research evaluated the mechanical response of Escherichia coli under different loading conditions. Indentation and prolonged creep tests were performed to understand their viscoelastic-plastic response. The results indicate that varying loading rates from 1 μm/s to 5 μm/s show an increase in modulus of 182% and 90%, calculated in the loading and unloading cycles, respectively, and a decrease in adhesion force by 42%. However, on varying loads from 5 nN to 25 nN, nominal change is observed in both modulus and adhesion force. The rupture curve at 100 nN load shows elastic and a small plastic deformation accompanied by a sharp peak indicating the cell wall rupture. The rupture force at the peak was found to be 34.38 ± 5.15 nN, irrespective of the loading rate, making it a failure criterion for bacteria rupture. The creep response of bacteria increases (for 6 s) and then remains constant (for 15 s) with time, indicating that a standard linear solid (SLS) model applies to this behavior. This work attempts to evaluate the mechanical properties of E. coli bacteria focusing on its rupture by contact killing mechanism.