Cell Sheet Constructs Research Articles

Cell spray printing combined with Lycium barbarum glycopeptide promotes repair of corneal epithelial injury

The corneal epithelium, located as the outermost layer of the cornea, is inherently susceptible to injuries that may lead to corneal opacities and compromise visual acuity. Rapid restoration of corneal epithelial injury is crucial for maintaining the transparency and integrity of the cornea. Cell spray treatment emerges as an innovative and effective approach in the field of regenerative medicine. In our study, a cell spray printing platform was established, and the optimal printing parameters were determined to be a printing air pressure of 5 PSI (34.47 kPa) and a liquid flow rate of 30 ml/h. Under these conditions, the viability and phenotype of spray-printed corneal epithelial cells were preserved. Moreover, Lycium barbarum glycopeptide (LBGP), a glycoprotein purified from wolfberry, enhanced proliferation while simultaneously inhibiting apoptosis of the spray-printed corneal epithelial cells. We found that the combination of cell spray printing and LBGP facilitated the rapid construction of multilayered cell sheets on flat and curved collagen membranes in vitro. Furthermore, the combined cell spray printing and LBGP accelerated the recovery of the rat corneal epithelium in the mechanical injury model. Our findings offer a therapeutic avenue for addressing corneal epithelial injuries and regeneration.

Improving the mechanical and biological functions of cell sheet constructs: The interplay of human-derived periodontal ligament stem cells, endothelial cells and plasma rich in growth factors

ObjectiveThe aim of this study was to produce and characterize triple-layered cell sheet constructs with varying cell compositions combined or not with the fibrin membrane scaffold obtained by the technology of Plasma Rich in Growth Factors (mPRGF). Materials and methodsHuman primary cultures of periodontal ligament stem cells (hPDLSCs) were isolated, and their stemness nature was evaluated. Three types of triple-layered composite constructs were generated, composed solely of hPDLSCs or combined with human umbilical vein endothelial cells (HUVECs), either as a sandwiched endothelial layer or as coculture sheets of both cell phenotypes. These three triple-layered constructs were also manufactured using mPRGF as cell sheets’ support. Necrosis, glucose consumption, secretion of extracellular matrix proteins and synthesis of proangiogenic factors were determined. Histological evaluations and proteomic analyses were also performed. ResultsThe inclusion of HUVECs did not clearly improve the properties of the multilayered constructs and yet hindered their optimal conformation. The presence of mPRGF prevented the shrinkage of cell sheets, stimulated the metabolic activity and increased the matrix synthesis. At the proteome level, mPRGF conferred a dramatic advantage to the hPDLSC constructs in their ability to provide a suitable environment for tissue regeneration by inducing the expression of proteins necessary for bone morphogenesis and cellular proliferation. ConclusionshPDLSCs’ triple-layer construct onto mPRGF emerges as the optimal structure for its use in regenerative therapeutics. Clinical relevanceThese results suggest the suitability of mPRGF as a promising tool to support cell sheet formation by improving their handling and biological functions.

IMMUNOMODULATORY POTENTIAL OF MAGNETICALLY ASSISTED CELL SHEET UNDER HYPOXIC ENVIRONMENTS UPON MAGNETIC STIMULATION

Common tendon injuries impair healing, leading to debilitation and an increased re-rupture risk. The impact of oxygen-sensing pathways on repair mechanisms, vital in regulating inflammation and fibrosis, remains unclear despite their relevance in tendon pathologies. Recent studies show that pulsed electromagnetic field (PEMF) reduce inflammation in human tendon cells (hTDCs) and in hypoxia-induced inflammation. We investigated the hypoxia's impact (1% and 2% oxygen tension) using magnetic cell sheet constructs (IL-1β-magCSs) primed with IL-1β. IL-1β-magCSs were exposed to low OT (1h, 4h,6h) in a hypoxic chamber. To confirm the role of PEMF (5Hz, 4mT, 50% duty cycle) on hypoxia modulation, IL-1β-magCSs, previously exposed to OT, were 1h-stimulated with PEMF. Our results show a significant increase in HIF- 1a and HIF-2a expression on IL-1β-magCSs after exposure to 2%-OT at all time points, compared to 1%- OT and normoxia. TNFa, IL-6, and IL-8 expression increased after 6 hours of 1%-OT exposure. PEMF stimulation of hypoxic IL-1β-magCSs led to decreased pro-inflammatory genes and increased anti-inflammatory (IL-4,IL-10) expression compared to unstimulated magCSs. IFN-g, TNF-α, and IL-6 release increased after 6 hours, regardless of %-OT, while IL-10 levels tended to rise after PEMF stimulation at 2%-OT. Also, NFkB expression was increased on IL-1β-magCSs exposed to 4 h and 6 h of 2%-OT, suggesting a link between NFkB and the production of pro-inflammatory factors. Moreover, PEMF stimulation showed a significantly decreased NFkB level in IL-1β-magCSs.Overall, low OT enhances expression of hypoxia-associated genes and inflammatory markers in IL-1β-magCSs with the involvement of NFkB. PEMF modulates the response of magCSs, previously conditioned to hypoxia and to inflammatory triggers, favouring expression of anti-inflammatory genes and proteins, supporting PEMF impact in pro-regenerative tendon strategies.Acknowledgements: ERC CoG MagTendon(No.772817), FCT under the Scientific Employment Stimulus-2020.01157.CEECIND. Thanks to Hospital da Prelada for providing tendon tissue samples (Portugal), and TERMRES Hub (Norte-01-0145-FEDER-022190).

Fabrication and Characterization of Decellularized Periodontal Ligament Cell Sheet Constructs.

Decellularized tissue engineered constructs have the potential to promote regeneration by providing a biomimetic extracellular matrix that directs tissue specific regeneration when implanted in situ. Recently, the use of cell sheets has shown promising results in promoting periodontal regeneration. Here, we describe the fabrication of decellularized periodontal cell sheets with intact extracellular matrix structural and biological properties. Melt electro-spun polycaprolactone (PCL) scaffolds are used as a carrier for the inherently fragile cell sheets, in order to provide support during the processes of decellularization. An optimized decellularization method is outlined using perfusion with a combination of NH4OH and Triton X-100 together with a DNase treatment step for DNA removal. The maintenance of extracellular matrix structural and biological integrity is important, and here, we describe the assessment of these properties using immunostaining for extracellular matrix proteins and ELISA for growth factor quantification.

Regulation and Reconstruction of Cell Phenotype Gradients Along the Tendon‐Bone Interface

AbstractTendon–bone interface is prevalent in the human body. It is divided into four zones: tendon (soft tissue), unmineralized fibrocartilage, mineralized fibrocartilage, and bone (hard tissue). Tendon–bone interface is characterized by a cell phenotype gradient that appears in the different zones. The cell phenotype gradients at the tendon–bone interface are orchestrated by specific intracellular molecular mechanisms, extracellular factors, immune signals, and neurovascular factors. These features have inspired scientists to design systems that mimic natural cell phenotype gradients. These biomimetic systems include the construction of cell sheets, regulation of cellular microenvironments, and the design of gradient functional scaffolds. Exploration of methods to mimic cell phenotype gradients is instructional for future clinical applications in reconstituting the tendon–bone interface. The present review elucidates the gradient composition of the tendon–bone interface. The associated regulatory mechanisms and applications are discussed, with the anticipation of creating a mise en scène for future research in interface tissue engineering.

Complex-shaped magnetic 3D cell-based structures for tissue engineering

The use of cells as building blocks for tissue engineering purposes has been a matter of research in the recent years. Still, the fabrication of complex-shaped 3D-like constructs using living-based materials is hampered through the difficulty in recapitulating the mechanical properties of the native tissues. In an attempt to develop robust tissue-like constructs, it is herein proposed the fabrication of complex-shaped magnetic cell sheets (CSs) with improved mechanical properties for bone TE. Hence, magnetic CSs with versatile shapes and enhanced mechanical performance are fabricated using a pre-osteoblast cell line (MC3T3-E1) through an universal approach that relies on the design of the substrate, cell density and magnetic force. Results show that such magnetic CSs exhibit a Young's modulus similar to those encountered in the soft tissues. The construction of stratified CSs is also explored using MC3T3-E1 and adipose-derived stromal cells (ASCs). The role of the pre-osteoblast cell line on ASCs osteogenesis is herein investigated for the first time in layered scaffold-free structures. After 21 days, the level of osteogenic markers in the heterotypic CS (MC3T3-E1:ASCs) is significantly higher than in the homotypic one (ASCs:ASCs), even in the absence of osteogenic differentiation factors. These evidences open new prospects for the creation of mechanically robust, complex, higher-ordered and completely functional 3D cell-based materials that better resemble the native environment of in vivo tissues.

Three-Dimensional Cell Sheet Construction Method with a Polyester Micromesh Sheet.

Cell sheet engineering has become important in a variety of fields, including regenerative medicine and transplantation. Our research group previously developed micromesh cultures that enable cells to form a cell sheet on a microstructured mesh sheet. Here, we present a more usable micromesh culture and devices that make it possible, aiming for widespread use. The devices are mainly constituted of a polyester micromesh sheet and three-dimensional (3D)-printed simple frames that fix the mesh sheet on it. Cells such as fibroblast Tig-1-20 cells, hepatoma HepG2 cells, or mesenchymal stem cells (MSC) were easily seeded on the polyester mesh sheet in the device and cultured for 16 days, which was followed by the formation of a 100-400-μm-thick cell sheet. The cell sheet was very robust, easy to handle, and could be readily removed from the device for subsequent analysis. Optical coherence tomography revealed the structure of the cell sheet as having the mesh sheet layer in the center of the cell sheet. Confocal microscopy demonstrated that Tig-1-20 cells in the cell sheet were aligned according to the shape of the mesh apertures, indicating that cell orientation can be controlled with this micromesh culture. As for another application, the device was used to construct a multilayered cell sheet that consists of three different types of cells. Furthermore, for mass production, the device frames were made using polyoxymethylene (POM) instead of 3D printing materials. Using the POM devices, a large MSC sheet for 10 cm dishes was successfully produced 7 days after cell seeding. This micromesh culture may become one of the useful cell sheet construction methods in future for medical and research fields. Impact statement Currently, cell sheets are constructed, for example, on a temperature-responsive polymer-coated dish or a porous membrane. These cell sheets are widely used but are not completely suitable in terms of robustness, ease of handling, cost, ease of microscopic cell observation, or nutrient supply. We previously reported that the micromesh culture can provide a three-dimensional (3D) cell sheet that has advantages for cell observation and nutrient supply. In this study, the micromesh culture was enhanced with a polyester micromesh sheet and a series of devices of polyoxymethylene, helping us to produce a robust, cost-effective, easily layered, and easy-to-use 3D cell sheet.

Magnetic nanoparticle internalization on C2C12 for construction of muscle cell sheets

Magnetic nanoparticle internalization on C2C12 for construction of muscle cell sheets

Effective stacking and transplantation of stem cell sheets using exogenous ROS-producing film for accelerated wound healing

Extensive skin loss caused by burns or diabetic ulcers may lead to major disability or even death. Therefore, cell-based therapies that enhance skin regeneration are clinically needed. Previous approaches have been applied the injections of cell suspensions and the implantation of biodegradable three-dimensional scaffolds seeded cells. However, these treatments have limits due to poor localization of the injected cells and insufficient delivery of oxygen and nutrients to cells. Recently, cell sheet-based tissue engineering has been developed to transplant cell sheets, which are cell-dense tissues without scaffolds. Because cell density is one of the important factors for improving the therapeutic effect of cell transplantation, transplanting layered cell sheet constructs can promote the recovery of tissue function and tissue regeneration compared with a single cell sheet. Thus, this study designed ROS-induced cell sheet stacking method with newly fabricated hematoporphyrin-incorporated polyketone film (Hp-PK film) to enhance cell sheet delivery efficiency and application in wound healing. We have demonstrated the therapeutic effect of a multi-layered mesenchymal stem cell sheets onto a full-thickness wound defect in nude mice. Consequentially, three-layered cell sheets transplanted and stacked by ROS-induced method promoted angiogenesis and skin regeneration at the wound site. Thus, our strategy based on Hp-PK film, which allows for easy stacking and transplantation of cell sheets, could be applied to enhance tissue regeneration. Statement of SignificanceWe herein report exogenous ROS-induced cell sheet stacking method with newly fabricated hematoporphyrin-incorporated polyketone film (Hp-PK film) to enhance cell sheet transplantation efficiency and application in wound healing. Although there are several ways to stack-up cell sheets, all of these methods have limitations in transplanting the cell sheet directly to the target site. The method is simple and takes a relatively short time compared to previously reported methods for stacking and transplanting cell sheets. Thus, our study will provide a scientific impact because the method of applying exogenous ROS generated from Hp-PK film on cell detachment can transplant the cell sheet through a process of putting a cell sheet-cultured film on the lesion, irradiating with light, and then removing only the film.

Development of a vitrification method for preserving human myoblast cell sheets for myocardial regeneration therapy

BackgroundTissue-engineered cardiac constructs have potential in the functional recovery of heart failure; however, the preservation of these constructs is crucial for the development and widespread application of this treatment. We hypothesized that tissue-engineered skeletal myoblast (SMB) constructs may be preserved by vitrification to conserve biological function and structure.ResultsScaffold-free cardiac cell-sheet constructs were prepared from SMBs and immersed in a vitrification solution containing ethylene glycol, sucrose, and carboxyl poly-l-lysine. The cell sheet was wrapped in a thin film and frozen rapidly above liquid nitrogen to achieve vitrification (vitrification group, n = 8); fresh, untreated SMB sheets (fresh group, n = 8) were used as the control. The cryopreserved SMB sheets were thawed at 2 days, 1 week, 1 month, and 3 months after cryopreservation for assessment. Thawed, cryopreserved SMB sheets were transplanted into rat hearts in a myocardial infarction nude rat model, and their effects on cardiac function were evaluated. Cell viability in the cardiac constructs of the vitrification group was comparable to that of the fresh group, independent of the period of cryopreservation (p > 0.05). The structures of the cell-sheet constructs, including cell-cell junctions such as desmosomes, extracellular matrix, and cell membranes, were maintained in the vitrification group for 3 months. The expression of cytokine genes and extracellular matrix proteins (fibronectin, collagen I, N-cadherin, and integrin α5) showed similar levels in the vitrification and fresh groups. Moreover, in an in vivo experiment, the ejection fraction was significantly improved in animals treated with the fresh or cryopreserved constructs as compared to that in the sham-treated group (p < 0.05).ConclusionsOverall, these results show that the vitrification method proposed here preserves the functionality and structure of scaffold-free cardiac cell-sheet constructs using human SMBs after thawing, suggesting the potential clinical application of this method in cell-sheet therapy.

Assessment of static and perfusion methods for decellularization of PCL membrane-supported periodontal ligament cell sheet constructs

ObjectivesDecellularization aims to harness the regenerative properties of native extracellular matrix. The objective of this study was to evaluate different methods of decellularization of periodontal ligament cell sheets whilst maintaining their structural and biological integrity. DesignHuman periodontal ligament cell sheets were placed onto melt electrospun polycaprolactone (PCL) membranes that reinforced the cell sheets during the various decellularization protocols. These cell sheet constructs (CSCs) were decellularized under static/perfusion conditions using a) 20 mM ammonium hydroxide (NH4OH)/Triton X-100, 0.5% v/v; and b) sodium dodecyl sulfate (SDS, 0.2% v/v), both +/− DNase besides Freeze–thaw (F/T) cycling method. CSCs were assessed using a collagen quantification assay, immunostaining and scanning electron microscopy. Residual fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF) and hepatocyte growth factor (HGF) were assessed with Bio-plex assays. ResultsDNA removal without DNase was higher under static conditions. However, after DNase treatment, there were no differences between the different decellularization methods with virtually 100% DNA removal. DNA elimination in F/T was less efficient even after DNase treatment. Collagen content was preserved with all techniques, except with SDS treatment. Structural integrity was preserved after NH4OH/Triton X-100 and F/T treatment, while SDS altered the extracellular matrix structure. Growth factor amounts were reduced after decellularization with all methods, with the greatest reduction (to virtually undetectable amounts) following SDS treatment, while NH4OH/Triton X-100 and DNase treatment resulted in approximately 10% retention. ConclusionsThis study showed that treatment with NH4OH/Triton X-100 and DNase solution was the most efficient method for DNA removal and the preservation of extracellular matrix integrity and growth factors retention.

Fabrication and Characterization of Decellularized Periodontal Ligament Cell Sheet Constructs.

Decellularized tissue-engineered constructs have the potential to promote regeneration by providing a biomimetic extracellular matrix that directs tissue-specific regeneration when implanted in situ. Recently, the use of cell sheets has shown promising results in promoting periodontal regeneration. Here, we describe the fabrication of decellularized periodontal cell sheets with intact extracellular matrix structural and biological properties. Melt electro spun polycaprolactone (PCL) scaffolds are used as a carrier for the inherently fragile cell sheets, to provide support during the processes of decellularization. An optimized decellularization method is outlined using perfusion with a combination of NH4OH and Triton X-100 together with a DNase treatment step for DNA removal. The maintenance of extracellular matrix structural and biological integrity is important, and here we describe the assessment of these properties using immunostaining for extracellular matrix proteins and ELISA for growth factor quantification.

In vivo periodontal tissue regeneration by periodontal ligament stem cells and endothelial cells in three-dimensional cell sheet constructs.

Chronic periodontitis causes damage to tooth-supporting tissues, resulting in tooth loss in adults. Recently, cell-sheet-based approaches have been studied to overcome the limitations of conventional cytotherapeutic procedures for periodontal regeneration. The purpose of the present study was to investigate the regenerative potential of periodontal ligament stem cells (PDLSCs) and human umbilical vein endothelial cells (HUVECs) in three-dimensional (3D) cell sheet constructs for periodontal regeneration in vivo. PDLSCs, HUVECs or co-cultures of both cells were seeded onto temperature-responsive culture dishes, and intact cell sheets were fabricated. Cell sheets were wrapped around the prepared human roots in three different combinations and implanted subcutaneously into immunodeficient mice. Histological evaluation revealed that after 2, 4 and 8 wk of implantation, periodontal ligament-like tissue arrangements were observed around the implanted roots in experimental groups compared with controls. Vascular lumens were also observed in periodontal compartments of HUVEC-containing groups. Periodontal ligament regeneration, cementogenesis and osteogenesis were evident in the experimental groups at both weeks 4 and 8, as shown by immunostaining for periostin and bone sialoprotein. Human cells in the transplanted cell sheets were stained by immunohistochemistry for the presence of human mitochondria. The 3D cell sheet-based approach may be potentially beneficial and is thus encouraged for future regenerative periodontal therapy.

Construction and characterization of osteogenic and vascular endothelial cell sheets from rat adipose-derived mesenchymal stem cells

In this study, adipose-derived mesenchymal stem cells (ADSCs) were isolated from adipose tissues of rats. Flow cytometry identification showed that ADSCs of passage 3 highly expressed CD29 and CD44, but hardly expressed CD31 and CD45. Adipogenic, osteogenic, and chondrogenic differentiation were confirmed by the results of oil red O staining, alkaline phosphatase (ALP), and alcian blue staining, respectively. ADSCs at a density of 1×10(6)/cm(2) were cultured in the osteogenic medium and the osteogenic cell sheets could be obtained after 14 d. The cell sheets were positive with von kossa staining. The transmission electron microscopy (TEM) result showed that needle-like calcium salt crystals were deposited on the ECM. These results suggested that the osteogenic cell sheets may have potential osteogenesis ability. ADSCs at a density of 1×10(6)/cm(2) were cultured in the endothelial cell growth medium-2 and the endothelial cell sheets can be formed after 16 d of culture. The TEM image confirmed that the Weibel-Palade corpuscle was seen in the cells. The expression of CD31 was positive, suggesting that the endothelial cell sheets may have a strong ability to form blood vessels. In this study, two types of cell sheets with the potential abilities of osteogenesis and blood vessels formation were obtained by induced culture of ADSCs in vitro, which lays a foundation to build vascularized tissue engineered bone for the therapy of bone defects.

Isolation and trans-differentiation of mesenchymal stromal cells into smooth muscle cells: Utility and applicability for cell-sheet engineering

BackgroundBone marrow (BM)-derived mesenchymal stromal cells (MSCs) have shown potential to differentiate into various cell types, including smooth muscle cells (SMCs). The extracellular matrix (ECM) represents an appealing and readily available source of SMCs for use in tissue engineering. In this study, we hypothesized that the ECM could be used to induce MSC differentiation to SMCs for engineered cell-sheet construction. MethodsPrimary MSCs were isolated from the BM of Wistar rats, transferred and cultured on dishes coated with 3 different types of ECM: collagen type IV (Col IV), fibronectin (FN), and laminin (LM). Primary MSCs were also included as a control. The proportions of SMC (a smooth muscle actin [aSMA] and SM22a) and MSC markers were examined with flow cytometry and Western blotting, and cell proliferation rates were also quantified. ResultsBoth FN and LM groups were able to induce differentiation of MSCs toward smooth muscle–like cell types, as evidenced by an increase in the proportion of SMC markers (aSMA; Col IV 42.3 ± 6.9%, FN 65.1 ± 6.5%, LM 59.3 ± 7.0%, Control 39.9 ± 3.1%; P = 0.02, SM22; Col IV 56.0 ± 7.7%, FN 74.2 ± 6.7%, LM 60.4 ± 8.7%, Control 44.9 ± 3.6%) and a decrease in that of MSC markers (CD105: Col IV 64.0 ± 5.2%, FN 57.6 ± 4.0%, LM 60.3 ± 7.0%, Control 85.3 ± 4.2%; P = 0.03). The LM group showed a decrease in overall cell proliferation, whereas FN and Col IV groups remained similar to control MSCs (Col IV, 9.0 ± 2.3%; FN, 9.8 ± 2.5%; LM, 4.3 ± 1.3%; Control, 9.8 ± 2.8%). ConclusionsOur findings indicate that ECM selection can guide differentiation of MSCs into the SMC lineage. Fibronectin preserved cellular proliferative capacity while yielding the highest proportion of differentiated SMCs, suggesting that FN-coated materials may be facilitate smooth muscle tissue engineering.

Effects of RGD immobilization on light-induced cell sheet detachment from TiO2 nanodots films

Light-induced cell detachment is reported to be a safe and effective cell sheet harvest method. In the present study, the effects of arginine–glycine–aspartic acid (RGD) immobilization on cell growth, cell sheet construction and cell harvest through light illumination are investigated. RGD was first immobilized on TiO2 nanodots films through simple physical adsorption, and then mouse pre-osteoblastic MC3T3-E1 cells were seeded on the films. It was found that RGD immobilization promoted cell adhesion and proliferation. It was also observed that cells cultured on RGD immobilized films showed relatively high level of pan-cadherin. Cells harvested with ultraviolet illumination (365nm) showed good viability on both RGD immobilized and unmodified TiO2 nanodot films. Single cell detachment assay showed that cells detached more quickly on RGD immobilized TiO2 nanodot films. That could be ascribed to the RGD release after UV365 illumination. The current study demonstrated that RGD immobilization could effectively improve both the cellular responses and light-induced cell harvest.

Decellularized cell sheet constructs for periodontal regeneration

Decellularized cell sheet constructs for periodontal regeneration

Cell Sheet-Based Tissue Engineering for Organizing Anisotropic Tissue Constructs Produced Using Microfabricated Thermoresponsive Substrates.

In some native tissues, appropriate microstructures, including orientation of the cell/extracellular matrix, provide specific mechanical and biological functions. For example, skeletal muscle is made of oriented myofibers that is responsible for the mechanical function. Native artery and myocardial tissues are organized three-dimensionally by stacking sheet-like tissues of aligned cells. Therefore, to construct any kind of complex tissue, the microstructures of cells such as myotubes, smooth muscle cells, and cardiomyocytes also need to be organized three-dimensionally just as in the native tissues of the body. Cell sheet-based tissue engineering allows the production of scaffold-free engineered tissues through a layer-by-layer construction technique. Recently, using microfabricated thermoresponsive substrates, aligned cells are being harvested as single continuous cell sheets. The cell sheets act as anisotropic tissue units to build three-dimensional tissue constructs with the appropriate anisotropy. This cell sheet-based technology is straightforward and has the potential to engineer a wide variety of complex tissues. In addition, due to the scaffold-free cell-dense environment, the physical and biological cell-cell interactions of these cell sheet constructs exhibit unique cell behaviors. These advantages will provide important clues to enable the production of well-organized tissues that closely mimic the structure and function of native tissues, required for the future of tissue engineering.

Spatial coordination of cell orientation directed by nanoribbon sheets

Spatial coordination of cell orientation is of central importance in tissue/organ construction. In this study, we developed microfabricated poly(lactic-co-glycolic acid) (PLGA) nanoribbon sheets with unique structures, using spin-coating and micropatterning techniques, in order to generate a hierarchically assembled cellular structure consisting of murine skeletal myoblasts (C2C12). The nanoribbon sheets were composed of aligned PLGA nanoribbons in the center, and strips on four sides which take a role as bridges to connect and immobilize the aligned nanoribbons. Such unique structures facilitated the alignment of C2C12 cells into bilayer cell sheets, and cellular alignment was directed by the aligned direction of nanoribbons. The nanoribbon sheets also facilitated the construction of multilayer cell sheets with anisotropic (orthogonal) and isotropic (parallel) orientations. The enhanced expression of myogenic genes of C2C12 cells on the bilayer cell sheets demonstrated that the nanoribbons induced C2C12 cell differentiation into mature myoblasts. The micropatterned nanoribbon sheets may be a useful tool for directing cellular organization with defined alignment for regenerative medicine and drug screening applications.

Osteogenic cell sheets reinforced with photofunctionalized micro-thin titanium.

Cell sheet technology has been used to deliver cells in single-sheet form with an intact extracellular matrix for soft tissue repair and regeneration. Here, we hypothesized that titanium-reinforced cell sheets could be constructed for bone tissue engineering and regeneration. Fifty-µm-thick titanium plates containing apertures were prepared and roughened by acid etching, some of which were photofunctionalized with 12 min of UV light treatment. Cell sheets were prepared by culturing rat calvarial periosteum-derived cells on temperature-responsive culture dishes and attached to titanium plates. Titanium-reinforced osteogenic cell sheet construction was conditional on various technical and material factors: cell sheets needed to be double-sided and sandwich the titanium plate, and the titanium plates needed to be micro thin and contain apertures to allow close apposition of the two cell sheets. Critically, titanium plates needed to be UV-photofunctionalized to ensure adherence and retention of cell sheets. Single-sided cell sheets or double-sided cell sheets on as-made titanium contracted and deformed within 4 days of incubation. Titanium-reinforced cell sheets on photofunctionalized titanium were structurally stable at least up to 14 days, developed the expected osteogenic phenotypes (ALP production and mineralization), and maintained structural integrity without functional degradation. Successful construction of titanium-reinforced osteogenic cell sheets was associated with increased cell attachment, retention, and expression of vinculin, an adhesion protein by photofunctionalization. This study identified the technical and material requirements for constructing titanium-reinforced osteogenic cell sheets. Future in vivo studies are warranted to test these titanium-reinforced cell sheets as stably transplantable, mechanically durable, and shape controllable osteogenic devices.