Constant Field Research Articles

System Tautochronic Path for Pendulum Vibration Absorber Based on Simple Harmonic Oscillator Transformation

Abstract Centrifugal pendulum vibration absorbers (CPVAs) are essentially collections of pendulums attached to a rotating component or components within a mechanical system for the purpose of mitigating the typical torsional surging that is inherent to internal combustion engines and electric motors. The dynamic stability and performance of CPVAs are highly dependent on the motion path defined for their pendulous masses. Assemblies of absorbers are tuned by adjusting these paths such that the pendulums respond to problematic orders (multiples of average rotation speed) in a way that smooths the rotational accelerations arising from combustion or other nonuniform rotational acceleration events. For most motion paths, pendulum tuning indeed shifts as a function of the pendulum response amplitude. For a given motion path, the tuning shift that occurs as pendulum amplitude varies produces potentially undesirable dynamic instabilities. Large amplitude pendulum motion that mitigates a high percentage of torsional oscillation while avoiding instabilities brought on by tuning shift introduces complexity and hazards into CPVA design processes. Therefore, identifying pendulum paths whose tuning order does not shift as the pendulum amplitude varies, so-called tautochronic paths, may greatly simplify engineering design processes for generating high-performing CPVAs. To illustrate this new approach and results, a tautochronic cutout shape producing constant period system motion is obtained for a simplified problem involving a mass sliding in the cutout of a larger mass that is free to translate horizontally without friction in a constant gravitational field, where the translating base mass replaces the rotating rotor in the centrifugal field.

Quantum efficiency enhancement of reflective GaAs photocathodes with exponential-doping structure generating a favorable built-in electric field

The rapid development of GaAs photocathodes has led to an increased focus on the attainment of high quantum efficiency. Three types of exponential-doping structures with a high to low doping concentration distribution from the interior to the surface are proposed for reflective GaAs emission layers. These three structures generate different built-in electric fields that facilitate photoelectron emission. The one-dimensional continuity equations for the increasing, constant, and decreasing types of built-in electric fields are derived, respectively. The electron concentration distribution and quantum efficiency varying with the wavelength are solved numerically by the finite difference method. The simulation results indicate that the quantum efficiency of the GaAs photocathode with the increasing type of built-in electric field is superior to that with the constant built-in electric field, while the GaAs photocathode with the decreasing type of built-in electric field shows the worst performance. Then, the designed GaAs photocathodes with the increasing and constant types of built-in electric fields are grown by metal-organic chemical vapor deposition and activated by cesium-oxygen alternating deposition. The measured spectral response curves show that the quantum efficiency of the GaAs photocathode with the increasing type of built-in electric field is higher in the whole band than that with the constant type of built-in electric field. In addition, the exponential-doping structure generating the increasing type of built-in electric field is beneficial for improving the surface potential barrier and increasing the surface electron escape probability.

The numerical analysis of complete and partial electrocoalescence in the droplet-layer system employing the sharp interface technique for multiphase-medium simulation

In this paper, the coalescence of a drop of water suspended in oil with a layer of water under the influence of a constant electric field is numerically investigated. Unlike most existing studies, the calculations are based on the application of the arbitrary Lagrangian-Eulerian method (ALEM), also called the moving mesh method, which belongs to the class of methods for modeling two-phase liquids with a sharp interface. Using this approach made it possible to avoid a false "escape" of the surface charge from the interface, which often occurs when using methods involving a diffuse interface. Despite the fact that ALEM does not allow describing topology changes by default, a numerical model was implemented in which the calculation is divided into three parts: the convergence of the drop and the layer before the moment of touch; the manual construction of the bridge at the moment of touch; the union of the drop and the layer. The developed model allowed us to obtain three possible modes of this process: complete coalescence, partial coalescence and a mode of stretching which has not practically been considered yet. The dependence of the volume of the separated secondary droplet on the size of the initial droplet and the average intensity of the applied electric field is obtained. The model showed good quantitative agreement with experimental studies. It has been shown that generally, the spots where the bridge and the neck are formed in case of partial coalescence do not coincide. A map of coalescence modes was obtained, i.e., the dependence of the transition threshold from coalescence to partial coalescence and from partial coalescence to stretching regime in a wide range of radii of initial droplets and electric field strengths. It has been shown that there is a maximum field strength at which droplets of any size merge with the layer. This map makes it possible to predict the coalescence regime in electrocoalescer. The proposed modeling technique can be used to calculate electrocoalescence modes at various values of the main parameters, which will help to optimize electrocoalescers at the design stage.

Nonlinear Perturbations and Weak Shock Waves in Isentropic Atmospheres

Acoustic perturbations to stellar envelopes can lead to the formation of weak shock waves via nonlinear wave steepening. Close to the stellar surface, the weak shock wave increases in strength and can potentially lead to the expulsion of part of the stellar envelope. While accurate analytic solutions to the fluid equations exist in the limits of low-amplitude waves or strong shocks, connecting these phases generally requires simulations. We address this problem using the fact that the plane-parallel Euler equations, in the presence of a constant gravitational field, admit exact Riemann invariants when the flow is isentropic. We obtain exact solutions for acoustic perturbations and show that after they steepen into shock waves, Whitham’s approximation can be used to solve for the shock’s dynamics in the weak to moderately strong regimes, using a simple ordinary differential equation. Numerical simulations show that our analytic shock approximation is accurate up to moderate (∼few–15) Mach numbers, where the accuracy increases with the adiabatic index.

Magnetic Memory Effects in BaFe2(As0.68P0.32)2 Superconducting Single Crystal.

Among many iron-based superconductors, isovalently substituted BaFe2(As1-xPx)2 displays, for x ≈ 0.3, apart from the quite usual Second Magnetization Peak (SMP) in the field dependence of the critical current density, an unusual peak effect in the temperature dependence of the critical current density in the constant field, which is related to the rhombic-to-square (RST) structural transition of the Bragg vortex glass (BVG). By using multi-harmonic AC susceptibility investigations in three different cooling regimes-field cooling, zero-field cooling, and field cooling with measurements during warming up-we have discovered the existence of a temperature region in which there is a pronounced magnetic memory effect, which we attributed to the direction of the structural transition. The observed huge differences in the third harmonic susceptibility at low and high AC frequencies indicates the difference in the time-scale of the structural transition in comparison with the timescale of the vortex excitations. Our findings show that the RST influence on the vortex dynamics goes beyond the previously observed influence on the onset of the SMP.

Linear dielectric ceramics for near-zero loss high-capacitance energy storage

High energy-density (Wrec) dielectric capacitors have gained a focal point in the field of power electronic systems. In this study, high energy storage density materials with near-zero loss were obtained by constructing different types of defect dipoles in linear dielectric ceramics. Mg2+and Nb5+ are strategically chosen as acceptor/donor ions, effectively replacing Ti4+ within Ca0.5Sr0.5TiO3-based ceramics. The results indicate that under an applied electric field, specific defects such as [MgTi″−VO··] and [NbTi·−Ti3+], can effectively regulate VO·· and electron movement, significantly reducing losses. Furthermore, high-density insulating grain boundaries, reduced VO·· concentrations and diminished carrier mobility contribute to enhanced resistivity, resulting in high Wrec ∼7.62 J/cm3 and η ∼92 % at 640 kV/cm, making it one of the most promising linear dielectrics to date. Notably, Wrec and η remain remarkably stable across a broad range of frequencies (1–500 Hz), temperatures (25–175 °C) and numerous cycles (up to 106). Additionally, finite element software was used to simulate the distribution of dielectric constant, electric potential, and local electric field, further verifying the correlation between microstructure and breakdown resistance. This innovative work provides a sustainable strategy to optimize the energy storage capacity of lead-free ceramics over a wide temperature range through strategic manipulation of defects.

Optimized design and performance testing of hydraulic electrostatic actuator

ABSTRACT Hydraulic electrostatic actuators have become a research hotspot for their inherent flexibility and safety of human-machine interaction. This paper aims to combine the characteristics of dielectric elastomers and fluid actuators, enhancing the dielectric constant and breakdown field strength by modifying Al2O3 on the surface of nanostructured BaTiO3 and in order to develop a hydraulic electrostatic actuator with silicone rubber as the matrix material. Single-factor experiments were firstly conducted to confirm the range of three factors affecting the actuation strain of the actuator: BaTiO3@Al2O3 content, thickness of the silicone rubber elastomer film, and pre-stretching ratio coefficient. The response surface methodology was used to study the interactive influence of the above three influencing factors on the actuation strain. It was obtained that A has an insignificant influence on the actuation strain, AB has a significant influence on the actuation strain, and B, C, AC, and BC have a highly influence on the actuation strain. Maximizing actuation strain as the optimization objective yielded the combination results of each factor: BaTiO3@Al2O3 content of 2.57%, thickness of 0.60 mm, and pre-stretching ratio coefficient of 2.50. Actuation strain tests were conducted with optimized parameters under no-load. The experimental results of the actuation strain test show that the relative error between the test value and the model prediction value of 16.47% is less than 5%, and the optimization model results are reliable. The optimized hydraulic electrostatic actuator was tested for actuation strain and electrical performance under different loads. The experiment showed that the maximum actuation strain of the hydraulic electrostatic actuator was 17.20% under a load of 100 g. The critical breakdown current of the actuator ranged from 115 μA to 130 μA, and the maximum electromechanical conversion efficiency of the actuator under different loads was 67.93%. Finally, a joint actuating device was developed based on the structure of the actuator, amplifying the output displacement of the actuator to 30 mm, and the linear displacement of the soft electro-fluid actuator can be converted into a 20° rotation angle through the gear steering mechanism, thus validating the effectiveness of the hydraulic electrostatic actuator.

Electro-phytoremediation of polluted soil at pilot level using maize

This article presents the imposition of a direct current electric field in the presence of seeds and plants of Zea mays L., to rehabilitate soils contaminated with hydrocarbons at a pilot level, and its influence on some physical and chemical properties of the soil, such as pH, electrical conductivity, organic matter content in the soil, enzymatic activity, bulk density, apparent density, porosity, cation exchange capacity, and soluble cations such as potassium, sodium, and calcium. For this reason, the edaphological characterization was carried out before and after an electro-phytoremediation process of soils contaminated with hydrocarbons, using an IrO2-Ta2O5|Ti anode and a titanium cathode, applying a constant electric field of 0.2 V/cm for 4 h to maize seeds and stimulating their germination. After one week, an electric field of 0.1 V/cm for 8 h was applied to the maize seeds every day for 42 days to stimulate the growth of maize plants. This study demonstrated the removal of hydrocarbons by electro-phytoremediation. The applied electric field increases seed germination and plant growth of Zea mays L. These results were obtained with the different transport phenomena that develop when using the electric field in the soil Vertisol pelic understudy at a pilot level.

Morphological and structural properties of antimony selenide thin films deposited with external electric field assistance

A method for producing a thin semiconductor film of antimony selenide (Sb2Se3) via vacuum thermal evaporation with the assistance of an electric field was presented. The morphological, elemental and structural properties of the thin films were characterized using X-ray diffraction and scanning electron microscopy (with energy dispersive X-ray spectroscopy). It was found that an applied constant electric field plays an important role in obtaining Sb2Se3 thin films with the desired morphological and structural properties. The latter is a useful tool for controlling charge transport properties in thin films.

Spin transfer torque and field driven 360° domain wall to bimeron conversion

In this work, using micromagnetic simulations we study the mechanism involved in the conversion of a 360° domain wall into stable pairs of bimeron (Q = +1) and antibimeron (Q = -1) in a ferromagnetic background when it is subjected to Zhang Li type of spin transfer torque. We show that the time scales associated with the conversion process can be significantly reduced by applying out of plane bias field. In particular, choosing a constant inclination angle and increasing the intensity of bias field aids in reducing the energy barrier required to stabilize the spin textures. Similarly, for a constant bias field intensity, varying the inclination angle between 0° to 40° reveals that the time required to stabilize the first bimeron is reduced by ∼ 3 ns. Further, tailoring the strength of in-plane current density as well as effective uniaxial anisotropy leads to faster conversion of domain wall to bimerons.

Calculation of the order parameter and dielectric susceptibility under the electric field near the incommensurate phase in NaNO2 using Landau model

ABSTRACT Temperature dependences of the order parameters (P and Ψ) and inverse susceptibilities (χp −1 and χΨ -1 ) are calculated for the ferroelectric(FE)-incommensurate (INC) – paraelectric (PE) transitions in NaNO2 at zero (E = 0) and constant electric fields E by the Landau phenomenological model. For the calculation of the polarisation P and the order parameter Ψ, the phase line equations are fitted to the observed data (E = 0) from the literature. On this basis, E-T phase diagram including the ferroelectric, incommensurate and paraelectric phases is constructed using the observed (E-T) data for NaNO2 as reported in the literature. In the presence of the polarisation P (secondary order parameter), which has a biquadratic coupling with the Ψ (primary order parameter) in the incommensurate phase, the Landau model presented here describes the observed behaviour of the FE-INC and INC-PE transitions in NaNO2. Under constant electric fields, our predictions can be compared with the experiments. This method of calculation can be applied to some other crystals exhibiting the incommensurate phase between the FE and PE phases.

Triboelectric Programmed Droplet Manipulation for Plug‐and‐Play Assembly

AbstractProgrammed droplet transport which is typically directed by surface energy gradients or external fields, is crucial in domains ranging from chemical reaction modulation to self‐powered intelligent sensing. However, droplet motion control remains constrained by path reconfiguration, requirements on chemical surface modification, and platform complexity. Here, a more universal plug‐and‐play droplet manipulation paradigm based on liquid‐solid contact electrification and triboelectricwetting on common dielectric surfaces is reported. By regulating the electrical double layer via asymmetric ion dynamics, the triboelectric charge polarity of droplets can be adjusted, enabling in situ manipulation without path reconfiguration dictated by the conventional droplet motion output. Droplets achieved an ultrahigh velocity of 450 mm s−1 on general surfaces, significantly exceeding the speeds observed in droplets subjected to constant electrostatic fields with chemical modifications. This flexible and modular functionally decoupled manipulation strategy offers an environmentally friendly, cost‐effective, and versatile paradigm, facilitating applications in chemical analysis and smart sensing.

Wind speed effect on infrared-image-based coal and gangue recognition with liquid intervention in LTCC

The commitment to achieving carbon neutrality by 2060 makes the clean transition of fossil energy production inevitable in China. As the primary fossil energy source, China produced approximately 4.66 billion tons of raw coal in 2023. Among them, in the fields of mining engineering and environmental science, the accurate recognition of gangue (one of the environmental pollutants produced by coal combustion is black-gray solid waste) from coal is crucial because it is a key step in reducing resource waste and environmental pollution. Hence, coal and gangue automatic recognition with high accuracy is very important for intelligent longwall top coal caving (LTCC) mining. A novel approach of “liquid intervention + infrared detection” is introduced to enhance the recognition accuracy when the exterior color of coal and gangue is similar. This study focuses on the infrared image recognition of coal and gangue after liquid intervention under varying wind speed conditions, and optimizes the image processing path. The effect of varying wind speed conditions on the recognition accuracy of coal and gangue after liquid intervention was analyzed, and the optimal wind speed range was determined. The morphological evolution characteristics of droplets under varying wind field conditions were studied by COMSOL two-phase flow interface. The results show that with the increase of wind speed, the surface contour of coal is gradually clear, and the overall recognition accuracy is also improved. When the high wind speed is 1.55 m/s, the recognition accuracy reaches 99.89%, and the recognition accuracy of other wind speed regions is also above 90% (within 7s). In addition, the numerical simulation can maintain the volume fraction of the droplet in a short time under the constant flow wind flow field, thus inhibiting the phenomenon that the recognition accuracy decreases with time. The simulation results are in good agreement with the physical experimental phenomena, which proves the reliability of the numerical simulation. This study is of great significance to the recognition of coal gangue types with low identification characteristics in LTCC, so as to ensure the primary economic benefits, ecological environment safety and sustainable development of coal mines.

Energy storage performance of sandwich structure dielectric composite by BNNS/TiO2 Co-doping for the high electric field capacitor

Dielectric capacitors are crucial for power systems and hybrid vehicles. However, the polymer dielectric owns low energy density and cannot meet the demands of high-power and energy storage systems. The synergistic improvement of balance between dielectric constant (εr) and breakdowon field strength (Eb), along with better energy storage performance, is a primary focus of this study. This research employs a high εr of P(VDF-TrFE-CFE) blended with linear PMMA to create a sandwich-structured composite via high-speed electrostatic spinning. Boron Nitride Nanosheets (BNNSs) for insulation and TiO2 for polarization are used as fillers, aiming to achieve polymer-based composite with large energy storage density and minimal energy loss. Results show that the sandwich-structured composite with 0.5 vol.% BNNSs in outer layer and 3 wt.% TiO2 in middle layer achieves the largest Ue of 21.8 J/cm3 at the η of 74 %. This study broadens the application of novel dielectric materials in the fields of energy.

The effect of a constant electric field in an undisturbed plasma on the stability of the electron beam–gas discharge collisional plasma system

This work is devoted to the study of a fast non-relativistic electron beam–gas discharge plasma system within the framework of the kinetic theory of stability. The influence of a constant electric field, collinear beam velocity, on the stability of the system in an undisturbed plasma is studied. It is shown that even a relatively small electric field, which does not significantly affect the energy of the electron beam, can lead to significant changes in the parameters of harmonic disturbances propagating in the electron beam–plasma system in the region of its instability. It was found that the reason for such changes is the drift of plasma electrons, which, as a consequence, leads to a change in the frequency of disturbances in the coordinate system associated with the plasma due to the Doppler effect. The results obtained are demonstrated by calculations based on the kinetic theory of perturbation parameters in a low-voltage beam discharge in rare gases, which is used in the development of plasma electronics devices. The effect of electron-atomic collisions on the stability of the electron beam–plasma system is investigated and compared with the results of other authors' works.

Features of the Formation of a Labyrinthine Structure in Thin Layers of Magnetic Fluids in a Constant Electric Field

Features of the Formation of a Labyrinthine Structure in Thin Layers of Magnetic Fluids in a Constant Electric Field

Inductive Calculation of Superconformal Indices Based on Giant Graviton Expansion

Abstract We investigate a simple-sum giant graviton expansion of the superconformal indices of ${\cal N}=2$ superconformal field theories realized on D3-branes probing 7-brane backgrounds with constant axio-dilation field. The expansion is of self-dual type, and imposes strong constraints on the indices. By using the constraints we determine the first few terms in the superconformal indices for arbitrary rank $N$.

Algebraic structure of the renormalization group in the renormalizable QFT theories

In this paper, we consider the group formed by finite renormalizations as an infinite-dimensional Lie group. It is demonstrated that for the finite renormalization of the gauge coupling constant, its generators [Formula: see text] with [Formula: see text] satisfy the commutation relations of the Witt algebra and, therefore, form its subalgebra. The commutation relations are also written for the more general case when finite renormalizations are made for both the coupling constant and matter fields. We also construct the generator of the Abelian subgroup corresponding to the changes of the renormalization scale. The explicit expressions for the renormalization group generators are written in the case when they act on the [Formula: see text]-function and the anomalous dimension. It is explained how the finite changes of these functions under the finite renormalizations can be obtained with the help of the exponential map.

Geometrically nonlinear analysis of layered beams using symbolic approach

This study presents a novel layered spatial beam model with discrete connections between layers, developed to accurately capture large displacements and rotations as well as finite strains. The formulation is characterized by simplicity, robustness and compatibility with automatic code generation, making it suitable for various applications. Key features of the model include the use of a piecewise constant strain field, the inclusion of discrete unknowns such as strains and stress resultants, and the efficient numerical implementation using the automatic code generation. The discrete connections between the layers of the model enable an efficient description of the interlaminar behaviour and the consideration of nonlinear constitutive properties. Numerical examples demonstrate the effectiveness and accuracy of the proposed approach and illustrate its potential for practical engineering applications.

Development of novel ionization chambers for reference dosimetry in electron flash radiotherapy

AbstractBackgroundReference dosimetry in ultra‐high dose rate (UHDR) beamlines is significantly hindered by limitations in conventional ionization chamber design. In particular, conventional chambers suffer from severe charge collection efficiency (CCE) degradation in high dose per pulse (DPP) beams.PurposeThe aim of this study was to optimize the design and performance of parallel plate ion chambers for use in UHDR dosimetry applications, and evaluate their potential as reference class chambers for calibration purposes. Three chamber designs were produced to determine the influence of the ion chamber response on electrode separation, field strength, and collection volume on the ion chamber response under UHDR and ultra‐high dose per pulse (UHDPP) conditions.MethodsThree chambers were designed and produced: the A11‐VAR (0.2–1.0 mm electrode gap, 20 mm diameter collector), the A11‐TPP (0.3 mm electrode gap, 20 mm diameter collector), and the A30 (0.3 mm electrode gap, 5.4 mm diameter collector). The chambers underwent full characterization using an UHDR 9 MeV electron beam with individually varied beam parameters of pulse repetition frequency (PRF, 10–120 Hz), pulse width (PW, 0.5–4 µs), and pulse amplitude (0.01–9 Gy/pulse). The response of the ion chambers was evaluated as a function of the DPP, PRF, PW, dose rate, electric field strength, and electrode gap.ResultsThe chamber response was found to be dependent on DPP and PW, and these dependencies were mitigated with larger electric field strengths and smaller electrode spacing. At a constant electric field strength, we measured a larger CCE as a function of DPP for ion chambers with a smaller electrode gap in the A11‐VAR. For ion chambers with identical electrode gap (A11‐TPP and A30), higher electric field strengths were found to yield better CCE at higher DPP. A PW dependence was observed at low electric field strengths (500 V/mm) for DPP values ranging from 1 to 5 Gy at PWs ranging from 0.5 to 4 µs, but at electric field strengths of 1000 V/mm and higher, these effects become negligible.ConclusionThis study confirmed that the CCE of ion chambers depends strongly on the electrode spacing and the electric field strength, and also on the DPP and the PW of the UHDR beam. A significant finding of this study is that although chamber performance does depend on PW, the effect on the CCE becomes negligible with reduced electrode spacing and increased electric field. A CCE of ≥95% was achieved for DPPs of up to 5 Gy with no observable dependence on PW using the A30 chamber, while still achieving an acceptable performance in conventional dose rate beams, opening up the possibility for this type of chamber to be used as a reference class chamber for calibration purposes of electron FLASH beamlines.