Confectionery Products Research Articles

Comparative Analysis of Milling Technologies in Dark and Milk Cocoa Topping Production for Ice Cream

Chocolate and cocoa toppings are widely used for confectionery products. Toppings used for ice creams contain higher fat content (about 40-60%) to ensure a greater flow to cover the whole product. The dark cocoa topping consists of cocoa and sugar powder distributed in vegetable fat, while cocoa topping with the added 7% non-fat milk fraction is regarded as a milk cocoa topping. This research aimed to determine and compare the impact of the ball mill, and five-roll mill and conching used for the production of dark and milk cocoa toppings regarding the particle size distribution, rheology properties and content of moisture, sucrose, fat and lactose. The obtained results showed that the volume-weighted mean parameter D (4,3) was lower in the samples produced in a ball mill. Additionally, the viscosity, linear and Casson, slightly increased in samples produced in a ball mill except for the milk cocoa topping which had 0.55 fold higher value of linear viscosity compared to the sample produced using a five-roll mill and conching. Regarding the results of NIR spectroscopy, it was found that the samples produced in a ball mill showed higher values of moisture, but lower values of sucrose, lactose and fat.

Microstructure of confectionery masses revealed by cryo-planing

Here we present a novel, combined cryo-scanning electron microscopy (cryo-SEM) and confocal laser scanning microscopy (CLSM) method for imaging of chocolate confectionery product microstructures of several millimeters down to about 100 nm. The SEM part of the method is based on cryo-fixation, cryo-polishing, and scanning electron microscopy, at low vacuum and low temperature using the backscattered electron signal. Starting with cryo-fixation of the chocolate sample in a desired state (cooled, ambient, or melted), the sample is cryo-planed in a cryo-ultramicrotome. Once a polished cut is obtained, the sample is analyzed using a cryo-SEM technique, with the unusual combination of low temperature and low vacuum settings, without heavy metal coating. Imaging is done based on material density contrast. Elemental composition of particles is recorded by energy dispersive x-ray spectroscopy (EDS). The combination of imaging contrast and EDS allows identification and measurement of the four main constituents of chocolate (cocoa solids, fat, sugar, and milk solids). Finally, the same cryo-polished sample sections of solid chocolate products are analyzed using a CLSM imaging technique to reveal complementary microstructural details. An obvious application of the method could be the visualization and quantitative analysis of the size, shape, and composition of chocolate confectionery products.

World practice of wheat flour classification

The paper presents a review of wheat classification accepted in various countries — producers of wheat and products of its processing (USA, Canada, Italy, France, Germany, China and others). Much attention is given to differences in the classification systems. Criteria for assigning wheat to certain classes based on physical and chemical properties of grain are examined. Differences in wheat classification by types, including morphological features and merits of grain such as size, color and gluten content, are highlighted. The authors discuss specific requirements and norms of wheat quality dictated by the regulatory authorities and requirements of the market of each country such as the mass fraction of moisture, content of impurities, density of grain and others. Based on the analysis of wheat classification in various world countries, it has been concluded that it is necessary to establish unified and generally accepted systems of wheat classification. This will allow simplifying international grain trade, make the market more transparent, strengthen trust between exporting and importing countries and will also facilitate the development of the international cooperation in the sphere of production and processing of wheat flour. Despite the wide assortment of flour confectionery products on the Russian market, baker’s flour of general purpose is mainly produced in the country. Its specific feature is a high content of flour from hard wheat varieties that are distinguished by higher protein content, strong gluten and large particle size. By its properties, this flour is not suitable for production of most flour confectionery products. Flour confectionery products produced from it are significantly inferior to import analogues in terms of their quality characteristics, which reduces their competitiveness. This dictates the need for the development of a standard for flour intended for production of confectionery products, which will include physico-chemical indicators for various flour types with consideration for their purpose.

Effect of Benzyl Alcohol on Main Defense System Components of Galleria mellonella (Lepidoptera).

Benzyl alcohol (E1519) is an aromatic alcohol used in the pharmaceutical and food industry. It is used to protect food products against microorganisms during storage, as a flavoring in the production of chocolate and confectionery products, as an important ingredient in fragrance, and as a preservative in medical products. However, little is known of its effect on insects. The main aim of this study was to determine the influence of benzyl alcohol on the defense systems of the wax moth Galleria mellonella, i.e., its cuticular lipid composition and critical elements of its immune system. A gas chromatography/mass spectrometry (GC/MS) analysis found benzyl alcohol treatment to elicit significant quantitative and qualitative differences in cuticular free fatty acid (FFA) profiles. Our findings indicate that benzyl alcohol treatment increased the levels of HSP70 and HSP90 and decreased those of HSF1, histamine, and cysteinyl leukotriene. Benzyl alcohol application also increased dismutase level in the hemolymph and lowered those of catalase and 8-OHdG. The treatment also had negative effects on G. mellonella hemocytes and a Sf9 cell line in vitro: 48-h treatment resulted in morphological changes, with the remaining cells being clearly spindle-shaped with numerous granules. The high insecticidal activity of compound and its lack of toxicity towards vertebrates suggest it could be an effective insecticide.

Application of Differential Scanning Calorimetry and Thermogravimetry for Thermal Analysis of Dark Chocolates

Dark chocolate is a confectionery product traditionally made from cocoa beans, sugar, and vanilla essence. The aim of the study was to investigate the thermal properties of dark chocolates and fats extracted from these chocolates using thermal methods of food analysis, such as differential scanning calorimetry (DSC) and thermogravimetry (TG). The profile of fatty acids in the fat extracted from the chocolates was also determined. The presence of three fatty acids (palmitic P, stearic S, and oleic O) constituting triacylglycerols—SOS, POP, POS, POO, and SOO—was observed in all the samples. The presence of linoleic acid (L) was also found, which forms triacylglycerols such as PLP and PLS. The researched chocolates were characterized by a diverse composition of fatty acids. In all the obtained DSC melting curves of fats, the presence of endothermic peaks was observed. The peaks, appearing at negative temperatures, may be caused by the transition of low-melting triacylglycerols. The differences between the melting curves for the obtained dark chocolate fats may have resulted from the presence of less stable polymorphic forms of cocoa butter. Based on the shape of the TG and DTG curves, it could be possible to indicate the adulteration of chocolates.

Market Evolution and Consumer Trends in Poland's Confectionery Industry

The Polish confectionery market is considered to be one of the most developed and dynamic markets in the world. But in recent years, the Polish food industry has faced a sharp increase in production and marketing costs, disruptions in the supply chains of raw materials, consumables and packaging, as well as the loss of traditional sales markets due to the war in Ukraine. The study of the peculiarities of the Polish confectionery market made it possible to assess the main indicators of the Polish market of confectionery goods of all categories, as well as its volume and trends. The article analyzes the situation on the Polish confectionery market, including production, export, import, consumption, geographic location of the market, levels of competition and development of the market's production and transport infrastructure. It was concluded that during 2022 there was a 12% increase in the volume of production of confectionery goods of all categories. At the same time the manufacture of Polish flour confectionery products increased by 19.3%. The growth rates of production of cocoa–rich and sugar sweets were 3.8% and 6.8%, respectively. About 50–70% of manufactured products are exported by Polish manufacturers. It is necessary to mention that during 2022 a record number of products were exported from Poland, exceeding the similar figures of the previous year by 13.8%. Meanwhile, despite the presence of developed domestic production of confectionery goods in Poland, the volume of imported supplies traditionally remains high and increased by 7.8% in 2022. At the same time, the level of competition in the Polish domestic market for flour, cocoa–rich/chocolate and sugar confectionery products is estimated as high. The level of the market's production and transport infrastructure is rated as developed.

A new range of flour confectionery products using non-traditional plant raw materials

A new range of flour confectionery products using non-traditional plant raw materials

Synergies of bioactivities, mechanisms, dietary factors and functional food applications of medicinal insulin plant (Costus pictus D.): a review

SummaryModernisation has significantly altered lifestyles, particularly eating habits, contributing to the increase of chronic diseases, with diabetes mellitus being a predominant metabolic disorder. Medicinal herbs such as Costus pictus (C. pictus), commonly known as the Insulin plant, offer a promising approach to managing these conditions. It is a perennial plant from the Costaceae family rich in proteins, fibres, minerals (K, Ca, Cr, Fe, Mn, Cu, Zn), and bioactive compounds. This review highlighted the plant's potential in mitigating chronic diseases and metabolic disorders due to its diverse bioactivities, including hepatoprotective, anti‐inflammatory, anticancer, antidiabetic, and antioxidant properties. These benefits are primarily attributed to its phytochemicals, mainly flavonoids and phenolic compounds. The antidiabetic mechanism involves suppressing metabolic enzymes essential for carbohydrate metabolism, while its antioxidant activity helps reduce excessive reactive oxygen species (ROS) levels implicated in various diseases. Furthermore, C. pictus can be incorporated into functional foods such as bakery and confectionery products, functional drinks, and edible coatings. We discussed the dietary factors, bioactivities, and underlying mechanisms associated with Costus pictus D., emphasising its applicability in functional food formulations. The synthesis of current research highlights the plant's role in modulating glucose metabolism, enhancing antioxidant defences, and its potential in mitigating diseases such as diabetes. By delving into the synergies between its dietary factors and bioactivities, this review aims to elucidate the multifaceted benefits of Costus pictus D., thereby fostering its integration into sustainable agricultural practises and contributing to public health nutrition.

녹차 가공 과자류의 제품명 연구

This study was to analyze the product name of the green tea processed confectionery and identify the characteristics reflected in those names, thereby providing insights necessary for developing such product names. For this purpose, this study collected data on 427 confectionery items with product names containing ‘green tea’ by searching the processed food database on the Ministry of Food and Drug Safety website from June 1 to June 16, 2024. The main research findings from the collected data analysis are as follows. First, the structural characteristics of confectionery product names included the prevalence of combinations of Sino-Korean words and loanwords, the use of neologisms or native words, and the need for improvement in foreign language expressions. Second, the semantic characteristics of the product names revealed the rise of foreign-style baked goods, the application of diversified confectionery ingredients, and the emergence of high-protein and vegan confectionery. In conclusion, green tea processed confectionery products should be named carefully compared to other products, as their names play a crucial role in conveying a healthy image and influencing consumer choice.

Improving the technology for manufacturing food additives, starches and starch products using infrared radiation

The paper considers the problems of physical modification of starch products and other food ingredients. The main trends and directions of innovative activity characteristic of the ingredient market have been described. As a result of the experiments, a method for modifying starches, starch products and complex food additives has been developed to improve their microbiological, physicochemical and organoleptic characteristics. It has been proven that when exposed to infrared radiation with a wavelength of 7–10 microns on a layer of a product 1 cm thick for 1 minute, the number of mesophilic aerobic and facultative anaerobic microorganisms in such a product is reduced to zero. At the same time, the mass fraction of reducing substances as a result of such treatment more than doubles, which indicates the occurrence of the dextrinization process. It is possible to process both starch products that act as carriers in complex mixtures and ready-made additives after completion of the mixing process. The mass fraction of moisture during infrared processing decreases by less than 1 % for maltodextrins and by less than 2 % for complex food additives, which characterizes the resulting technological losses as acceptable. Changing the granulometric composition of complex additives under the influence of infrared radiation improves the flowability of the product, increases the uniformity of distribution of flavoring substances over the surface of the carrier, which in turn makes it possible to reduce the dosage of complex additives in the manufacture of meat and confectionery products. Based on the results obtained, technological diagrams have been developed and described showing the production process step by step, indicating all significant parameters.

Increasing the nutritional value of cupcakes and evaluating their quality

The use of non-traditional types of raw materials in the production of flour confectionery products makes it possible to increase the nutritional value of products and enrich them with useful nutrients (proteins, dietary fiber, vitamins, and minerals). During the study, organoleptic, chemical, microbiological, and biochemical methods of analysis of raw materials, semi-finished products and products were used to determine the chemical composition and calculate the nutritional value of the proposed cupcakes. Partial replacement of premium-grade wheat flour in the recipe for the Stolichny cake with stone fruit flour (pomegranate and apricot kernels) and whole-grain wallpaper wheat flour, as well as the introduction of highly sugared molasses, sunflower oil with the addition of olive oil, contribute to the improvement organoleptic and physicochemical characteristics of products, increase their functionality and do not lead to a deterioration in microbiological characteristics. Consumption of 100 g of developed fortified products ensures the degree of satisfaction of the daily requirement for protein by 19 %, fat – 8, carbohydrates – 14, dietary fiber – 28, minerals – 6–30, vitamins – 6–39 %. The results of the study will contribute to expanding the range of enriched muffins with increased nutritional value using traditional and non-traditional raw materials that ensure food safety and resource conservation.

Some aspects of assessing the quality of confectionery products based on fruit raw materials

Some aspects of assessing the quality of confectionery products based on fruit raw materials

Application of selenium for enrichment of wheat flour to obtain a quality final product in accordance with consumer characteristics

Enrichment of flour with microelements and vitamins increases its nutritional value and can solve the urgent problem of improving the health of the population of Kazakhstan through the daily consumption of food products obtained from such flour, for example, bread, bakery, pasta and confectionery products, which are almost always on the tables of Kazakh consumers . Natural sources of many vital micronutrients, unfortunately, are not always available to some categories of our people, so consuming processed products from fortified flour will help compensate for the deficiency of some microelements, for example, iron, iodine and zinc. However, the need to enrich flour with other microelements, no less important for the human body and which are present in products not often consumed by Kazakhstanis, has become the goal of our research, namely an element such as selenium, the main function of which in the body is to maintain the immune system and the formation of thyroid hormones. The article presents the results of research on the development of technology for enriching wheat flour with selenium with the study of the baking properties of fortified flour. The research methodology was based on experimental methods, including the preparation of samples for research, instrumental methods for determining the physicochemical parameters of raw materials, intermediate products and finished products, as well as expert methods for determining the organoleptic properties of the final product. It has been established that the highest and first grades of flour are almost completely absent of any mineral substances, which confirms the conclusion that existing grain processing technologies transfer the mineral elements originally present in the grain into plant waste, which means it needs to be enriched. It has been established that selenium must be used in a form that ensures its safety for the human body - L-Selenomethionine. It has been established that to ensure the body’s daily requirement of selenium, the selenium-flour ratio is 0.15 mcg per 100 g. To control the selenium content in products, it has been established that the most suitable method is Raman spectroscopy using a Romanov microscope - a spectrometer, which allows determine selenium in spectra from 465 to 2900, which confirms the sensitivity of the method to microconcentrations of the element under study. It has been established that the consumer characteristics of finished products obtained using traditional technology from flour enriched with selenium are consistent both in organoleptic and physico-chemical indicators.

3D Printable κ‐Carrageenan‐Based Granular Hydrogels

Abstractκ‐carrageenan, an algae‐extracted polysaccharide known for its emulsifying properties, is widely used in food and beauty products. Because of its abundance in nature, similarity to natural glycosaminoglycans, and biocompatibility, it is a promising alternative to animal gelatin for tissue engineering. Key to the more widespread use of κ‐carrageenan for biomedical applications is its processability, which is hampered by its temperature‐dependent rheological properties. Here, a κ‐carrageenan‐based ink is introduced that can be 3D printed at room temperature through direct ink writing (DIW). This is achieved by formulating κ‐carrageenan as microgels that are covalently crosslinked through a second network, resulting in double network granular hydrogels (DNGHs). These DNGHs can be stiffened to reach stiffnesses up to 0.9 MPa under tension and 1.1 MPa under compression through the addition of metal ions and glucose. The metal/glucose reinforcement also increases the work of fracture up to 1.1 MJ m−3, exceeding that of unmodified κ‐carrageenan DNGHs 50‐fold. The potential of the ink by room temperature 3D printing cm‐sized free‐standing load‐bearing structures is demonstrated. This ink is envisaged to be a well‐suited algae‐derived alternative for the animal‐based gelatin for tissue engineering and in food applications for example as soft confectionery products.

Potential Antidiabetic, Antioxidative and Antiproliferative Properties of Functional Wheat Flour Muffins Enriched with White Clover Flowers (Trifolium repens L.).

The aim of the study was to evaluate the functional properties of muffins fortified with white clover flowers (Trifolium repens L.), which were added to the dough in the following amounts: (i) 0% (control); (ii) 2.5%; (iii) 5.5%; (iv) 7.5%; and (v) 10%. The organoleptic properties were assessed by a panel of consumers. Additionally, the following parameters were also tested: basic chemical composition, total polyphenols, the antioxidant activity together with antiproliferative effects on the A375 melanoma cell line, starch nutritional fractions and the in vitro glycemic index. As a result, replacing wheat flour with white clover flour significantly affected the color, aroma and taste of the muffins. The content of proteins, fats, total ash, dietary fiber, resistant starch (RS), slowly digestible starch (SDS),total polyphenols and antioxidant activity increased statistically significantly with the elevated amount of white clover flour added to the dough. At the same time, the content of free glucose (FG), rapidly available glucose (RAG) and rapidly digestible starch (RDS), the value of the in vitro glycemic index and the viability of melanoma cancer cells decreased significantly. The muffins enriched with white clover flowers might constitute an interesting proposition and extension of the existing assortment of confectionery products.

Effect of Partial Replacement of Wheat Flour by Flour from Extruded Sunflower Seed Kernels on Muffins Quality.

The use of new types of raw materials to improve the quality and nutritional value of products is an important trend in flour confectionery. Flour from extruded sunflower seed kernels (FESSK), the by-product of oil production, was used as a new ingredient in muffin formulation. Analysis of physicochemical and nutritional properties of muffins prepared with FESSK, which was added in the amounts of 5, 10, and 15% to the total weight of mixture of wheat and rye flours, as well as their sensory evaluation, wereperformed. According to the sensory evaluation, the muffins with FESSK had a pleasant, nutty and sunflower aroma, and the best results were shown by muffins with 10% of FESSK. Addition of FESSK, 10%, led to an increase of the content of protein by 24.7%, fat by 16.9%, fiber by 23.3%, ash by 16.9%, and a decrease of content of total carbohydrates by 5.2% and sugars by 16.2%. Enriched muffins had improved texture characteristics, particularly, smooth, crack-free surface, soft, and elastic crumb with well-developed porosity and small, evenly distributed, thin-walled pores. The FESSK could be recommended as an ingredient for improving the nutritional and technological properties of flour confectionery products.

Study of antioxidant properties of organic dried black mulberry

The object of the study is black dried organic mulberry. The subject of research is the antioxidant properties of black dried organic mulberry. The research hypothesis is that due to its antioxidant properties, organic black mulberry can serve as a source for the production of food additives to slow down oxidation processes in fat-containing products. The study investigated changes in the quality of the fat base for the production of flour confectionery products: butter with sesame oil in a ratio of 80:20 %. Black dried inorganic mulberry was used as a control sample. This made it possible to compare the inhibitory-stabilizing effect on lipids of organic and inorganic raw materials. On the 10th day of storage of the samples, the peroxide number in the fat with the addition of organic mulberry was 1.7 times lower than in the fat base without the addition of stabilizers. The peroxide number in the fat with organic mulberry added was 17.5 ½O mmol/kg. Primary oxidation in the sample with inorganic mulberry also occurred more slowly than in the sample without any additives. On the 10th day of storage, the amount of peroxides was 1.2 times less than the amount of peroxides in the fat base without the addition of mulberry. The fat acid value of black organic dried mulberry added on day 10 was 1.21 mn/KOH, with black inorganic dried mulberry added 1.80 mg/KOH. The sample without added antioxidants had an acid value of 2.12 mg/KOH. The content of ascorbic acid in black dried inorganic and organic mulberries does not differ significantly and is 10.78 and 10.49 mg/100 g, respectively. It has been proven that the content of polyphenolic compounds is 18.2 and 27.2 mg/100 g, respectively, in dried inorganic and organic black mulberries. It is their presence that explains the antioxidant properties of mulberry. Therefore, organic production affects the accumulation of polyphenolic compounds in plants. Polyphenolic compounds have antimicrobial properties, so their higher amount in organic raw materials is dictated by the fact that organic plants must independently fight against microbiological pests without the use of pesticides. Further research will be devoted to the creation of nutritional supplements based on organic black mulberry.

Enrichment of White Chocolate with Microencapsulated β-Carotene: Impact on Quality Characteristics and β-Carotene Stability during Storage.

This study developed functional white chocolate enriched with free (WC-F) and encapsulated β-carotene using whey protein isolate (WPI) and pullulan (PUL) blends through spray drying (WC-SP), freeze drying (WC-LP), and coaxial electrospinning (WC-EL). The thermal properties, rheological properties, hardness, and color of the chocolates were evaluated, and the stability of β-carotene was monitored over 4 months at 25 °C. No significant differences were found in melting profile temperatures among samples; however, WC-LP and WC-EL exhibited higher melting energies (30.88 J/g and 16.00 J/g) compared to the control (12.42 J/g). WC-F and WC-SP showed rheological behaviors similar to those of the control, while WC-LP and WC-EL displayed altered flow characteristics. Hardness was unaffected in WC-F and WC-SP (7.77 N/mm2 and 9.36 N/mm2), increased slightly in WC-LP (10.28 N/mm2), and decreased significantly in WC-EL (5.89 N/mm2). Over storage, melting point, rheological parameters, and hardness increased slightly, while color parameters decreased. β-carotene degradation followed a first-order reaction model, with degradation rate constants (k) of 0.0066 day-1 for WC-SP, 0.0094 day-1 for WC-LP, and 0.0080 day-1 for WC-EL, compared to 0.0164 day-1 for WC-F. WC-SP provided the best β-carotene retention, extending the half-life period by 2 times compared to WC-F (126.04 days vs. 61.95 days). Practical implications: The findings suggest that WC-SP, with its superior β-carotene stability, is particularly suitable for the development of functional confectionery products with extended shelf life, offering potential benefits in industrial applications where product stability is crucial. Future research directions: Further studies could explore the incorporation of additional bioactive compounds in white chocolate using similar encapsulation methods, as well as consumer acceptance and sensory evaluation of these enriched products.

Influence of various corn syrup types on the quality and sensory properties of gelatin-based jelly confectionery

Jelly candies are soft confectionery products primarily composed of sucrose, corn syrup and gelling agents. This study investigates the impact of six different corn syrup, all used at constant amount (46.22%), on the physicochemical (moisture content, pH, Colour), texture and sensory properties of gelatin-based jelly samples. The Moisture content, pH, colour, and texture properties of samples were analysed at 0th, 15th, 30th, 45th, and 60th day during storage. Before storage moisture content of the candiesranged from21.03 to 22.57% whereas after 60 days, it was found between 19.31 and 20.72%. Sample JF42 exhibited the least moisture rate loss. The type of corn syrup did not significantly affect the pH of the samples. Samples with higher fructose content in the corn syrup had the lowest hardness, whereas the sample with the highest maltose content exhibited the highest hardness. Changes in gumminess and chewiness paralleled variations in hardness results. Hardness and gumminess were found suitable to follow up gelatin-based samples storage using the zero-order kinetics modelling. Corn syrups with high fructose amounts intensified the redness, while those with high glucose levels led to yellowness in the candies. In sensory evaluation, products made with G40, G60, and M50 corn syrups received higher general Understanding how various types of corn syrup impact the candies quality helps producers optimize their formulation. This information enables producers to mitigate quality deterioration during storage, ensuring that their candies maintain at the desired level and appeal to consumers.

Physicochemical and textural properties of gummy candies prepared with fruit vinegar

Foods with additional functional value derived from natural sources are becoming more and more in demand these days, including confectionary products. Therefore, the study aimed to develop a gummy candy recipe, enriched with different fruit vinegars and determine the components' effect on the products' mineral, acid, sugar, antioxidant, and polyphenol content, and texture of the confectionery products with analytical methods. In terms of macroelement content, potassium was present in the largest amount in the tested candies (167.87 and 178.83 mg kg-1) and liquid ingredients (57,71–306.93 mg kg-1). In the case of microelements, iron (4.81, 4.79 mg kg-1) and boron (4.62, 4.49 mg kg-1) were significant in the products, iron is also found in gelatin in significant quantities (3.51 mg kg-1), however, boron came exclusively from fruit-derived components (1.02–9.40 mg kg-1). Among the tested organic acids, malic acid (21.67–46.12 mg g-1), and acetic acid (47.74–50.06 mg g-1) were significant in both the raw materials and products, while the fructose content (2.44–439.35 mg g-1) was prominent among the sugars, but the glucose (75.99–163.44 mg g-1) and sucrose (73.61–157.00 mg g-1) content were also significant. Unfortunately, the polyphenol (1.37–1.46 mg GAE/g) and antioxidant (0.29–0.75 mg AAE/g) content of the products was not significant, maybe because of their heat sensitivity. In terms of the texture of the candies, the two candies prepared with different fruit vinegars had similar textural properties, however, in terms of hardness (3523.10 N/m2), gumminess (3266.25 N/m2), and chewiness (3425.33 N/m2) the gummy candy with apple cider vinegar proved to be better. Unlike many other confectionery products, the sugar content of the developed product is provided only by the used the apple concentrate, it does not contain added sugar or sweeteners. The addition of fruit vinegars has been proven to have a positive effect on the nutritional values of candies. By replacing gelatin with another gelling agent, the product can also be prepared in a vegan form.