Cone Beam CT Angiography Research Articles

Prostate artery embolization using n-butyl cyanoacrylate glue for symptomatic benign prostatic hyperplasia: A six-month outcome analysis in 103 patients

PurposeThe purpose of this study was to assess the feasibility, safety, and 6-month outcomes of prostate artery embolization (PAE) using N-butyl-cyanoacrylate (NBCA) glue as the only embolic agent in patients with benign prostatic hyperplasia (BPH)-related lower urinary tract symptoms. Materials and methodsPatients with BPH-related lower urinary tract symptoms who were treated by PAE using methacryloxysulfolane-NBCA mixed with ethiodized oil (1:8 ratio) between September 2018 and January 2023 were retrospectively included. Vascular mapping was made using cone-beam computed tomography angiography. PAEs were performed as an outpatient procedure, under local anaesthesia. Outcomes were assessed at six months using the International Prostate Symptoms Score (IPSS) and associated quality-of-life score (IPSS-QoL), prostate-specific antigen (PSA) level, prostate volume, and International Index of Erectile Function form 5 (IIEF5). ResultsA total of 103 men with a mean age of 68.4 ± 6 (standard deviation [SD]) years were included. Technical success rate was 100%. The mean fluoroscopy time was 26.4 ± 12.5 (SD) min and the median radiation dose was 23 980 mGy·cm (Q1, Q3: 16 770, 38 450). Compared to baseline, statistically significant improvements were observed at six months for the IPSS (8.9 ± 6.2 [SD] vs. 20.2 ± 6.5 [SD]; P = 0.01), IPSS-QoL (2.1 ± 1.4 [SD] vs. 5.1 ± 0.9 [SD]; P = 0.01), PSA level (3.6 ± 3.2 [SD] ng/mL vs. 4.8 ± 4.2 [SD] ng/mL; P = 0.0001), and prostate volume (78.6 ± 43.5 [SD] mL vs. 119.1 ± 65.7 [SD] mL; P = 0.01). Minor adverse events developed in 19/103 (18.4%) patients. No major complications occurred. Compared to baseline, the IIEF5 did not change significantly at six months (15.3 ± 6.8 [SD] vs. 15.8 ± 6.8 [SD]; P = 0.078). ConclusionPAE with NBCA is a feasible and safe method that provides good outcomes at six months in patients with BPH-related lower urinary tract symptoms. This method deserves further evaluation in randomized trials with longer follow-up.

The role of post-dilatation in carotid MicroNet-covered stent implantation, evaluated using 3D cone-beam CT angiography.

This study aims to assess the role and safety of post-dilatation in protected carotid artery stenting (PCAS) using the new MicroNet-covered 2nd-generation stent assessed by cone beam CT scans. From March 2020 to March 2022, patients were enrolled in the study according to CT angiography results based on the following criteria: Evidence of 70% to 99% carotid stenosis in asymptomatic patients and 50% to 99% in symptomatic patients, per the NASCET index. Using a FilterWire EZ™ (Boston Scientific, Natick, MA, USA) embolic protection system (EPS), MicroNet-covered stent PCAS was performed by two interventional radiologists with at least 8 years of experience in endovascular intervention. Each patient underwent post-dilatation following stent placement. Finally, a third radiologist (not participating in the interventional procedures) evaluated the cone beam CT scans and calculated residual stenosis. Major and minor complications were recorded in the 30 days following the procedure. A total of 192 patients (121 male, mean age 73±10 years) were included in the study, and all patients received post-dilatation following stent implantation. Technical successes were achieved in all procedures. Adverse events noted in this study were limited to periprocedural transient ischemic attacks that occurred in three out of 192 patients (1.6%) and showed a swift complete recovery. The post-dilatation balloon diameters used in the study were: 5.0 mm (30.3%), 5.5 mm (39.3%) and 6 mm (30.3%). Optimized postdilatation resulted in a significant increase in the final luminal area. Similar improvements were observed in all subtypes of plaque. Post-dilatation in protected CAS is safe and induces a significant improvement in the cross-sectional area regardless of the stenotic plaque.

Superior hypophyseal arteries: angiographic re-discovery, comprehensive assessment, and embryologic implications

The superior hypophyseal arteries (SHAs) are well known in anatomical and surgical literature, with a well-established role in supply of the anterior hypophysis and superjacent optic apparatus. However, due to...

Arterial Blood Supply to the Cerebral Arterial Circle in the Selected Species of Carnivora Order from Poland.

Carnivores are a wide, diverse group of mammals whose representatives live all over the world. The study presents the results of the analysis of the arterial vascularization of the blood supply to the cerebral arterial circle of selected species in the Caniformia suborder living in Poland. The selected group consists of wild and farm animals-105 animals in total. Three different methods were used-latex preparation, corrosion cast, and cone-beam computed tomography angiography. The main source of blood for encephalon in the described species is the internal carotid artery, and the second one is the vertebral artery. The results were discussed in relation to the current knowledge of this field of research. Information on the potential physiological meaning of such vascular pattern has been provided.

7T magnetic resonance angiographic imaging of basilar artery perforator aneurysms - initial experience of a non-invasive alternative to DSA.

Perforator aneurysms of the basilar artery (PABA) are rare causes of subarachnoid haemorrhage (SAH) and challenging to diagnose. We present two cases of SAH caused by PABA diagnosed by cone beam computed tomography angiography (CBCTA) and a novel non-invasive method - 7T magnetic resonance imaging (7T MRI). Two patients with SAH, diagnosed with PABA, were imaged on day 9 and 13 after onset, respectively, with CBCTA and 7T MR angiography (MRA) performed on the day after and at follow-up at 3 months. All four 7T MRI examinations in the two patients were technically successful with fully diagnostic images. No endovascular treatment was performed and control with 7T MRA at 3 months showed no remaining aneurysms. PABA can be imaged with 7T MRI - a novel non-invasive method, allowing non-invasive follow-up to monitor this rare cause of SAH.

Dual-Layer Detector Cone-Beam CT Angiography for Stroke Assessment: First-in-Human Results (the Next Generation X-ray Imaging System Trial).

In patients with stroke, IV cone-beam CTA in the angiography suite could be an alternative to CTA to shorten the door-to-thrombectomy time. However, image quality in cone-beam CTA is typically limited by artifacts. This study evaluated a prototype dual-layer detector cone-beam CT angiography versus CTA in patients with stroke. A prospective, single-center trial enrolled consecutive patients with ischemic or hemorrhagic stroke on initial CT. Intracranial arterial segment vessel conspicuity and artifact presence were evaluated on dual-layer cone-beam CTA 70-keV virtual monoenergetic images and CTA. Eleven predetermined vessel segments were matched for every patient. Twelve patients were necessary to show noninferiority to CTA. Noninferiority was determined by the exact binomial test; the 1-sided lower performance boundary was prospectively set to 80% (98.75% CI). Twenty-one patients had matched image sets (mean age, 72 years). After excluding examinations with movement or contrast media injection issues, all readers individually considered dual-layer cone-beam CT angiography noninferior to CTA (CI boundary, 93%, 84%, 80%, respectively) when evaluating arteries relevant in candidates for intracranial thrombectomy. Artifacts were more prevalent compared with CTA. The majority assessment rated each individual segment except M1 as having noninferior conspicuity compared with CTA. In a single-center stroke setting, dual-layer detector cone-beam CTA virtual monoenergetic images are noninferior to CTA under certain conditions. Notably, the prototype is hampered by a long scan time and is not capable of contrast media bolus tracking. After excluding examinations with such scan issues, readers considered dual-layer detector cone-beam CTA noninferior to CTA, despite more artifacts.

Semiautomatic Cone-Beam Computed Tomography Virtual Hepatic Volumetry for Intra-Arterial Therapies

PurposeTo evaluate a software simulating the perfused liver volume from virtual selected embolization points on proximal enhanced cone-beam computed tomography (CT) liver angiography data set using selective cone-beam CT as a reference standard. Materials and MethodsSeventy-eight selective/proximal cone-beam CT couples in 46 patients referred for intra-arterial liver treatment at 2 recruiting centers were retrospectively included. A reference selective volume (RSV) was calculated from the selective cone-beam CT by manual segmentation and was used as a reference standard. The virtual perfusion volume (VPV) was then obtained using Liver ASSIST Virtual Parenchyma software on proximal cone-beam CT angiography using the same injection point as for selective cone-beam CT. RSV and VPV were then compared as absolute, relative, and signed volumetric errors (ABSErr, RVErr, and SVErr, respectively), whereas their spatial correspondence was assessed using the Dice similarity coefficient. ResultsThe software was technically successful in automatically computing VPV in 74 of 78 (94.8%) cases. In the 74 analyzed couples, the median RSV was not significantly different from the median VPV (394 mL [196–640 mL] and 391 mL [192–620 mL], respectively; P = .435). The median ABSErr, RVErr, SVErr, and Dice similarity coefficient were 40.9 mL (19.9–97.7 mL), 12.8% (5%–22%), 9.9 mL (−49.0 to 40.4 mL), and 80% (76%–84%), respectively. No significant ABSErr, RVErr, SVErr, and Dice similarity coefficient differences were found between the 2 centers (P = .574, P = .612, P = .416, and P = .674, respectively). ConclusionsPerfusion hepatic volumes simulated on proximal enhanced cone-beam CT using the virtual parenchyma software are numerically and spatially similar to those manually obtained on selective cone-beam CT.

Added Value of Selective Intra-arterial Cone-Beam CT Angiography in the Management of Visceral Artery Aneurysms

Purpose: The aim of this study is to evaluate the value of selective intra-arterial cone-beam computed tomography angiography (CBCTA) relative to conventional computed tomography angiography (CTA) in understanding visceral artery aneurysm (VAA) morphology, and its impact on treatment planning. Materials and Methods: Between January 2017 and August 2021, all patients who had a diagnosis of VAA and underwent intraoperative CBCTA imaging were retrospectively reviewed. Impact on treatment decisions, optimal C-arm angulations derived from CBCTA, and additional radiation exposure were reported. Two blinded independent reviewers qualitatively reviewed CBCTA and conventional CTA images. A 5-point Likert scale (1=poor image quality, 5=excellent image quality) was used to assess the overall image quality of each modality. Number of vessels arising from the aneurysm sac was counted. Results: A total of 16 patients had a diagnosis of VAA during the study period, of whom 10 patients had intraoperative CBCTA and conventional CTA available for review. Out of 10 patients, 7 underwent successful endovascular treatment, 2 were deemed not amenable for endovascular embolization based on intraoperative CBCTA findings, and 1 had resolved pseudoaneurysm. Total fluoroscopy time and radiation dose (dose area product [DAP] and skin dose) for all procedures were 27.7 ± 19.9 minutes, 28 362 (±18 651) µGy*m2, and 1879 (±1734) mGy, respectively. Radiation exposure from CBCTA (DAP and skin dose) was 5703 (±3967) µGy*m2 and 223.6 (±141.3) mGy, respectively. In patients who underwent endovascular treatment, the proportional DAP from CBCTA was 18.3% (±15.3%) of the total procedural radiation dose. Qualitative rating of overall image quality of CBCTA images was superior to CTA images (mean score: 4.55 vs 3, p<0.001). More branch vessels arising from the VAA were identified by all reviewers in CBCTA as compared with conventional CTA (median, min-max: 3, 0–4 vs 2,1–3 vessels). Conclusion: Intraoperative CBCTA after selective intra-arterial contrast injection, with better spatial resolution, provided better delineation of visceral aneurysm morphology as compared with conventional, intravenous CTA and enabled optimal treatment planning at a reasonable additional radiation exposure. Clinical Impact Visceral artery aneurysms (VAA) are often diagnosed incidentally by conventional computed tomographic angiography (CTA). Endovascular treatment typically requires selective angiographies at multiple projections to better understand aneurysm morphology, location, and efferent branch vessels. Intra-arterial cone-beam CT angiography (CBCTA) for VAA has the advantage of selective contrast opacification, better spatial resolution, and three-dimensional/multi-planar visualization of aneurysm morphology. In addition, CBCTA enables identification of optimal C-arm working projection for subsequent endovascular treatment. The aim of this study is to evaluate the value of intraoperative CBCTA relative to conventional CTA in understanding visceral artery aneurysm morphology and its impact on treatment planning.

Catheter-directed computed tomography angiography: A pictorial essay.

Catheter-directed computed tomography angiography (CDCTA) is an imaging technique where CT images are acquired after selective catheterization of a vessel. Images obtained in this fashion provide several advantages over conventional imaging techniques such as fluoroscopic angiography, digital subtraction angiography, cone-beam CT, and conventional CT angiography. At this point, there is still limited literature on the subject, with prior studies examining a small number of potential uses. The goal of this pictorial essay is to illustrate our single tertiary care center experience using CDCTA.

Mixed-Reality-Assisted Puncture of the Common Femoral Artery in a Phantom Model.

Percutaneous femoral arterial access is daily practice in a variety of medical specialties and enables physicians worldwide to perform endovascular interventions. The reported incidence of percutaneous femoral arterial access complications is 3–18% and often results from suboptimal puncture location due to insufficient visualization of the target vessel. The purpose of this proof-of-concept study was to evaluate the feasibility and the positional error of a mixed-reality (MR)-assisted puncture of the common femoral artery in a phantom model using a commercially available navigation system. In total, 15 MR-assisted punctures were performed. Cone-beam computed tomography angiography (CTA) was used following each puncture to allow quantification of positional error of needle placements in the axial and sagittal planes. Technical success was achieved in 14/15 cases (93.3%) with a median axial positional error of 1.0 mm (IQR 1.3) and a median sagittal positional error of 1.1 mm (IQR 1.6). The median duration of the registration process and needle insertion was 2 min (IQR 1.0). MR-assisted puncture of the common femoral artery is feasible with acceptable positional errors in a phantom model. Future studies should aim to measure and reduce the positional error resulting from MR registration.

Evaluation of the Effect of Tube Voltage on Metal Artifact Reduction in Cone Beam Computed Tomography

The purpose of this study was to evaluate the effectiveness of metal artifact reduction (MAR) processing in cone beam computed tomography angiography using the relative artifact index (AIr) and the difference due to tube voltage. A water phantom was imaged to obtain noise images. Next, a platinum alloy embolic coil was installed in the central part of the water phantom and the peripheral part, and then artifact images were acquired. The tube voltages were 70 kV and 109 kV, and four types of artifact images were acquired (with and without MAR). In all, 10 images in the z-direction from each image series were acquired (total: 40 images). The AIr value was calculated by setting a region of interest in the images, and multiple comparisons were made between the imaging conditions (significance level set at p<0.05). The AIr values were significantly lower by MAR, and MAR significantly reduced metal artifacts regardless of tube voltage (p<0.001). This study's results show that MAR with cone beam CT can reduce metal artifacts by more than 91%, and the effect is comparable regardless of tube voltage.

Transcarotid access for remote robotic endovascular neurointerventions: a cadaveric proof-of-concept study.

The purpose of this proof-of-concept study was to demonstrate the setup and feasibility of transcarotid access for remote robotic neurointerventions in a cadaveric model. The interventional procedures were performed in a fresh-frozen cadaveric model using an endovascular robotic system and a robotic angiography imaging system. A prototype remote, robotic-drive system with an ethernet-based network connectivity and audio-video communication system was used to drive the robotic system remotely. After surgical exposure of the common carotid artery in a cadaveric model, an 8-Fr arterial was inserted and anchored. A telescopic guiding sheath and catheter/microcatheter combination was modified to account for the "workable" length with the CorPath GRX robotic system using transcarotid access. To simulate a carotid stenting procedure, a 0.014-inch wire was advanced robotically to the extracranial internal carotid artery. After confirming the wire position and anatomy by angiography, a self-expandable rapid exchange nitinol stent was loaded into the robotic cassette, advanced, and then deployed robotically across the carotid bifurcation. To simulate an endovascular stroke recanalization procedure, a 0.014-inch wire was advanced into the proximal middle cerebral artery with robotic assistance. A modified 2.95-Fr delivery microcatheter (Velocity, Penumbra Inc.) was loaded into the robotic cassette and positioned. After robotic retraction of the wire, it was switched manually to a mechanical thrombectomy device (Solitaire X, Medtronic). The stentriever was then advanced robotically into the end of the microcatheter. After robotic unfolding and short microcatheter retraction, the microcatheter was manually removed and the stent retriever was extracted using robotic assistance. During intravascular navigation, the device position was guided by 2D angiography and confirmed by 3D cone-beam CT angiography. In this proof-of-concept cadaver study, the authors demonstrated the setup and technical feasibility of transcarotid access for remote robot-assisted neurointerventions such as carotid artery stenting and mechanical thrombectomy. Using transcarotid access, catheter length modifications were necessary to achieve "working length" compatibility with the current-generation CorPath GRX robotic system. While further improvements in dedicated robotic solutions for neurointerventions and next-generation thrombectomy devices are necessary, the transcarotid approach provides a direct, relatively rapid access route to the brain for delivering remote stroke treatment.

Target Embolization of Complex Vertebral Artery Dissecting Aneurysm with Endovascular Reconstructive Technique Using Cone-Beam Computed Tomography Angiography: Technical Note

Detailed vasculature of vertebral artery dissecting aneurysms (VADAs) is often complicated owing to the irregular structure with the intimal flap/double lumen. Our aim was to present an endovascular reconstructive technique with assessment of detailed vasculature and the relationship between dissection and surrounding vessels using cone-beam computed tomography angiography (CBCT-A). The study included 6 cases with complex vertebral artery dissecting aneurysm. Selective digital subtraction angiography initially identified the location and shape of dissection. CBCT-A was then performed with selective injection into the affected vertebral artery. Luminal morphology of the dissection and surrounding arterial anatomy were assessed using CBCT-A. CBCT-A clearly demonstrated luminal morphology of the intimal flap/double lumen, the entrance into the pseudolumen, and the entire dissecting segment. Tiny perforator arteries were also identified. In all 6 cases, target coil embolization for the pseudolumen and stent placement using an LVIS stent for the entire dissecting segment were successfully performed with the aid of information obtained from CBCT-A. No complications occurred in the perioperative period, and improvement of dissection was identified in the follow-up period. Target embolization of complex vertebral artery dissecting aneurysm with endovascular reconstructive technique with special reference to the detailed anatomy of dissection using CBCT-A would be useful for safe and effective treatment results.

Central Retinal Artery Visualization with Cone-Beam CT Angiography.

Background There are multiple tools available to visualize the retinal and choroidal vasculature of the posterior globe. However, there are currently no reliable in vivo imaging techniques that can visualize the entire retrobulbar course of the retinal and ciliary vessels. Purpose To identify and characterize the central retinal artery (CRA) using cone-beam CT (CBCT) images obtained as part of diagnostic cerebral angiography. Materials and Methods In this retrospective study, patients with catheter DSA performed between October 2019 and October 2020 were included if CBCT angiography included the orbit in the field of view. The CBCT angiography data sets were postprocessed with a small field-of-view volume centered in the posterior globe to a maximum resolution of 0.2 mm. The following were evaluated: CRA origin, CRA course, CRA point of penetration into the optic nerve sheath, bifurcation of the CRA at the papilla, visualization of anatomic variants, and visualization of the central retinal vein. Descriptive statistical analysis was performed. Results Twenty-one patients with 24 visualized orbits were included in the analysis (mean age, 55 years ± 15; 14 women). Indications for angiography were as follows: diagnostic angiography (n = 8), aneurysm treatment (n = 6), or other (n = 7). The CRA was identified in all orbits; the origin, course, point of penetration of the CRA into the optic nerve sheath, and termination in the papilla were visualized in all orbits. The average length of the intraneural segment was 10.6 mm (range, 7-18 mm). The central retinal vein was identified in six of 24 orbits. Conclusion Cone-beam CT, performed during diagnostic angiography, consistently demonstrated the in vivo central retinal artery, demonstrating excellent potential for multiple diagnostic and therapeutic applications. © RSNA, 2021 Online supplemental material is available for this article.

Distribution of symptomatic cerebral vasospasm following subarachnoid hemorrhage assessed using cone-beam CT angiography

Background and purposeCone-beam CT angiography (CB-CTA) provides a three-dimensional spatial resolution which is, so far, unmatched in clinical practice compared with other conventional techniques such as two-dimensional digital subtracted angiography....

Cone-beam CT angiography to assess the microvascular anatomy of intracranial arterial dissections.

Intracranial artery dissection is a rare and generally under-recognized cause of ischaemic stroke or subarachnoid haemorrhage. The aim of this study was to analyse the efficacy of cone-beam computed tomography angiography (CBCT-A) to detect arterial ultrastructural alterations in intracranial artery dissection. This is an observational and retrospective case series. Between January 2018 and November 2020, four patients were admitted with an acute ischaemic stroke due to intracranial dissection studied with CBCT-A. In all cases, the CBCT-A documented vascular ultrastructural alterations related with the intracranial dissection. CBCT-A is an intraprocedural diagnostic technique that is useful for the diagnosis of intracranial dissections.

Improving Cone-Beam CT Angiography for Prostatic Artery Embolization: Is a Low-Dose Protocol Equivalent to the Standard?

PurposeTo compare the utility of low-dose versus standard cone-beam computed tomography (CT) angiography protocols in identifying nontarget embolization (NTE) during prostatic artery embolization (PAE). Materials and MethodsA prospective, single-center, Phase-1 study (NCT02592473) was conducted for lower urinary tract symptoms in benign prostatic hyperplasia. Prostate volume, international prostate symptom score (IPSS), quality of life score (QoL), International Index of Erectile Function (IIEF), peak flow rate, UCLA Prostate Cancer Index (UCLA-PCI), and postvoid residual were recorded at baseline and 1, 3, 6, 12, and 24-months after PAE. Six-second (standard protocol, n = 29) or 5-second (low-dose protocol n = 45) rotations were made. Images were selected and matched in pairs by areas of NTE and compared by readers using a binomial generalized estimating equation model. Procedural outcomes were analyzed using a linear mixed model. ResultsSeventy-four cone-beam CT angiographies were performed in 21 patients. IPSS and QoL scores significantly improved (P <.05). There was no change in UCLA-PCI or IIEF scores. Dose area product of the low- and standard-dose protocol were 37,340.82 mGy·cm2 ± 104.66 and 62,645.66 mGy·cm2 ± 12,711.48, respectively, representing a dose reduction of 40.4%. A total of 120 comparisons showed no preference between the 2 protocols (P =.24). Observers identified 76 and 69 instances of NTE in the standard- and low-dose protocols, respectively (P =.125). ConclusionsLow-dose cone-beam CT angiography achieved equivalent clinical utility in identifying NTE during PAE, with the advantage of a lower radiation dose.

Intraoperative application of a new-generation 3D IV-DSA technology in resection of a hemorrhagic cerebellar AVM.

Although intravenous digital subtraction angiography (IV-DSA), cone-beam CT, and rotational angiography are well-established technologies, using them in a single system in the hybrid operating room to acquire high-quality noninvasive 3D images is a recent development. This video demonstrates microsurgical excision of a ruptured cerebellar arteriovenous malformation (AVM) in a 66-year-old male followed by intraoperative IV-DSA acquisition using a new-generation system (Artis Icono). IV-DSA confirmed in real time that no residual remained following excision without the need to reposition the patient. To the best of the authors’ knowledge, this is the first surgical video to demonstrate the simplified workflow and application of this technology in neurovascular surgery.The video can be found here: https://youtu.be/bo5ya9DQQPw

Impact of Cone-Beam Computed Tomography Angiography on Visualization of Sylvian Veins

A detailed understanding of the anatomy of Sylvian veins preoperatively is needed for venous-preserving Sylvian dissection. Better visualization of the venous architecture will facilitate surgical strategies for Sylvian dissection. This study evaluated and compared the image quality of the Sylvian veins and their tributaries using high-resolution cone-beam computed tomography angiography (CBCT-A) and three-dimensional computed tomography angiography (3D-CTA). Twenty-four patients who underwent 3D-CTA and CBCT-A as a preoperative simulation for clipping of unruptured intracranial aneurysms were retrospectively reviewed. In comparisons with intraoperative inspections, 3 raters evaluated the image quality of the Sylvian veins by 3D-CTA and CBCT-A with a 5-point scale. Visualization of the Sylvian veins and their tributaries by the 2 imaging modalities was compared using Wilcoxon signed rank test. CBCT-A showed superior image quality to 3D-CTA in evaluations of the discrimination of adjacent superficial Sylvian veins (2.8 ± 0.80 vs. 4.6 ± 0.37, P<0.0001), adjacent Sylvian veins at the sphenoid wing (3.1 ± 0.71 vs. 4.1 ± 0.56, P= 0.0001), and visualization of the tributaries of the Sylvian veins (2.5 ± 0.70 vs. 4.4 ± 0.37, P < 0.0001). CBCT-A was superior to 3D-CTA for visualizing the Sylvian veins and their tributaries. CBCT-A will provide important information on the anatomy of the Sylvian veins preoperatively.

Intercostal artery embolization to induce false lumen thrombosis in type B aortic dissection.

Persistent false lumen flow is common after thoracic endovascular aortic repair of type B aortic dissection and may contribute to continued aortic aneurysmal degeneration. We report an innovative technique of intercostal artery embolization within the false lumen for a patient who had incomplete false lumen thrombosis and progressive aortic enlargement after thoracic endovascular aortic repair of chronic type B aortic dissection. Technical success was facilitated by use of on-table cone beam computed tomography angiography, virtual vessel marking, and modern endovascular tools. The patient had no complications from the procedure. Postoperative imaging demonstrated complete thoracic false lumen thrombosis and favorable aortic remodeling with reduction in maximal aortic diameter.