Conductive Pressure-sensitive Adhesives Research Articles

カーボンナノチューブを用いた導電性粘着剤の設計

カーボンナノチューブを用いた導電性粘着剤の設計

Preparation and Properties of CF/CNTs/NanoG Filled Polyacrylate Electrically Conductive Pressure-Sensitive Adhesives

With the ‘Synergistic Effects’ such as ‘Bridging’ and ‘Intercalating’ between fillers with different morphologies, we can get the CF/CNTs/NanoG filled polyacrylate electrically conductive adhesives (ECA). Through the study, we found that the comprehensive properties of the electrically conductive PSA reach the best when the composite fillers are made up of CF 3wt%、NanoG 5wt% and CNTs 5wt%. The conductivity of the electrically conductive PSA reaches 3.0×10-2 S/cm, the 180o peel strength is 0.38KN/m and the shear strength is 0.42MPa.

Behavior of Pressure-Sensitive Adhesives Filled with Metallized Inorganic Particles

The electrically conductive pressure-sensitive composite adhesives based on acrylic polymer and silver-coated inorganic particles have been investigated in this article. The electrical conductivity of the pressure-sensitive adhesives containing silver coated spherical inorganic particles is lower at the same concentration of the filler in comparison with silver coated inorganic fibers, the strength of adhesive joint to aluminum being higher in the case of the pressure-sensitive adhesive containing silver-coated inorganic fibers. After the thermal treatment the strength of adhesive joint to aluminum of electrically conductive pressure sensitive adhesives increases significantly. The suitable concentration proposition of the silver-coated inorganic filler in the pressure-sensitive adhesive requires a compromise solution of the problem taking into account the ultimate adhesive and electrical properties of the investigated pressure-sensitive adhesives composites.