Conductivity Of Nanocomposites Research Articles

Next-Generation Cardiac Interfacing Technologies Using Nanomaterial-Based Soft Bioelectronics.

Cardiac interfacing devices are essential components for the management of cardiovascular diseases, particularly in terms of electrophysiological monitoring and implementation of therapies. However, conventional cardiac devices are typically composed of rigid and bulky materials and thus pose significant challenges for effective long-term interfacing with the curvilinear surface of a dynamically beating heart. In this regard, the recent development of intrinsically soft bioelectronic devices using nanocomposites, which are fabricated by blending conductive nanofillers in polymeric and elastomeric matrices, has shown great promise. The intrinsically soft bioelectronics not only endure the dynamic beating motion of the heart and maintain stable performance but also enable conformal, reliable, and large-area interfacing with the target cardiac tissue, allowing for high-quality electrophysiological mapping, feedback electrical stimulations, and even mechanical assistance. Here, we explore next-generation cardiac interfacing strategies based on soft bioelectronic devices that utilize elastic conductive nanocomposites. We first discuss the conventional cardiac devices used to manage cardiovascular diseases and explain their undesired limitations. Then, we introduce intrinsically soft polymeric materials and mechanical restraint devices utilizing soft polymeric materials. After the discussion of the fabrication and functionalization of conductive nanomaterials, the introduction of intrinsically soft bioelectronics using nanocomposites and their application to cardiac monitoring and feedback therapy follow. Finally, comments on the future prospects of soft bioelectronics for cardiac interfacing technologies are discussed.

Strain‐Tolerant Nanocomposite Conductors with Engineered Bicontinuous Phase System by Additive Liquid/Solid Assembly

AbstractIntrinsically stretchable conductors are vital components in next‐generation flexible electronics. However, solid conductive networks are generally vulnerable to external deformations due to their incompatible mechanical properties with the highly elastic substrates or matrixes. It is still challenging to achieve precisely controlled conductive structure with stable electromechanical performances. Herein, a nanocomposite conductor with 3D engineered bicontinuous phase system is developed, which is constructed by alternately arranged robust solid‐phase and conductive liquid‐phase via additive liquid/solid assembly. The proper rheological properties and extraordinary structural compatibility of the liquid‐phase prompt the formation of bridged structure within the 3D periodic solid‐phase main skeleton, giving rise to stable and even strain‐enhanced electrical and electromagnetic interference (EMI) shielding properties under external deformation. A negative resistance change of −37% along with unabated EMI shielding effectiveness and mechanical properties are obtained at 100% strain, showing negligible performance degradation even after 10,000 cycles of rigorous stretching and releasing. A strain‐tolerant pressure‐sensing device is further demonstrated using the liquid/solid nanocomposite structure, delivering a unique function of precisely recognizing the local pressure at large tensile loading interference. This work provides a new paradigm for the manufacturing of nanocomposites with desired functionalities using the adequate nanofiller reserve toward practical strain‐tolerant applications.

Evaluation of strain-sensitive behavior in elastomeric conductive nanocomposites containing carbon nanotubes-a finite element-percolation model approach

A finite element (FE)-percolation model approach is developed to predict the strain-sensitive response of the three-dimensional (3D) representative volume element (RVE) of carbon nanotube (CNT)-elastomeric nanocomposite. In the simulation model, CNTs are modeled as solid, impenetrable cylinders inside a cubic insulating matrix. FE simulation is performed to evaluate the structural response of the RVE under applied strain. The FE model updates the locations of the CNTs in the deformed RVE. The paths are found using a suitable 3D resistance network associated with different percolation paths involved in the critical distance criterion. The percolation model utilizes the paths found to identify the electrical circuit for predicting tunneling conductivity. The simulating algorithm is used to study the influence of tunneling barrier height, nanotube volume fraction, and geometrical aspects. The lowest critical distance criterion is achieved for higher volume fractions and the most heightened sensitivity is obtained for lower CNT aspect ratios.

Synthesis, characterization, and coating application of a highly conductive polyaniline-TiO2 nanocomposite

Synthesis, characterization, and coating application of a highly conductive polyaniline-TiO2 nanocomposite

Comprehensive Investigation of the Temperature-Dependent Electromechanical Behaviors of Carbon Nanotube/Polymer Composites.

The performances of flexible piezoresistive sensors based on polymer nanocomposites are significantly affected by the environmental temperature; therefore, comprehensively investigating the temperature-dependent electromechanical response behaviors of conductive polymer nanocomposites is crucial for developing high-precision flexible piezoresistive sensors in a wide-temperature range. Herein, carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composites widely used for flexible piezoresistive sensors were prepared, and then the temperature-dependent electrical, mechanical, and electromechanical properties of the optimized CNT/PDMS composite in the temperature range from -150 to 150 °C were systematically investigated. At a low temperature of -150 °C, the CNT/PDMS composite becomes brittle with a compressive modulus of ∼1.2 MPa and loses its elasticity and reversible sensing capability. At a high temperature (above 90 °C), the CNT/PDMS composite softens, shows a fluid-like mechanical property, and loses its reversible sensing capability. In the temperature range from -60 to 90 °C, the CNT/PDMS composite exhibits good elasticity and reversible sensing behaviors and its modulus, resistivity, and sensing sensitivity decrease with an increasing temperature. At room temperature (30 °C), the CNT/PDMS composite exhibits better mechanical and piezoresistive stability than those at low and high temperatures. Given that environmental temperature changes have significant effects on the sensing performances of conductive polymer composites, the effect of ambient temperature changes must be considered when flexible piezoresistive sensors are designed and fabricated.

Wearable strain sensor utilizing the synergistic effect of Ti3C2Tx MXene/AgNW nanohybrid for point-of-care respiratory monitoring

Respiratory signals are significant indicators for detecting changes in physiological conditions and early diagnosis of numerous respiratory illnesses. Herein, we have integrated a high-performance strain sensor and portable circuit board (PCB) with personalized interface to develop point-of-care respiratory monitoring device. The ultrasensitive strain sensor utilizes a conductive polymeric nanocomposite that harnesses the synergistic effect of Ti3C2Tx (MXene)/AgNW nanohybrid to develop a wearable device. The wearable device is capable of analysing pulmonary volumes, such as forced volume capacity (FVC) and forced expiratory volume (FEV1), while accurately recognizing various breathing patterns in a resting state (such as normal, forced, and obstructive), as well as during different physical activities. It shows excellent correlation (>93%) with commercial spirometer for measurement of pulmonary parameters. In addition, we present a wireless device for lab rat respiratory monitoring in anaesthetic state. The device is implemented for real-time respiratory monitoring under mild, normal and high anaesthesia doses. The levels of anaesthesia doses including a critical limit can be significantly discriminated by means of breathing frequency and amplitude, which ultimately results in saving their lives. These results demonstrate the practical feasibility of the strain sensing device as wearable electronics for point-of-care respiratory monitoring in humans and other species.

Investigations on Impact of YSZ Nanoparticles on Morphology & Electrical conductivity of PEDOT: PSS

Conductive polymer nanocomposites, which combine the flexibility and conductivity of polymers with the unique properties of nanofillers, have generated interest in various fields such as energy storage, sensors, coatings, and corrosion protection. This study discusses the effect of Yttria-stabilized zirconium nanoparticles (YSZ NPs) on the morphology and electrical conductivity of poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) (PEDOT: PSS). Thin films of PEDOT: PSS and PEDOT: PSS: YSZ were fabricated using spin coating technique. FTIR and XRD characterizations confirmed the interaction between YSZ nanoparticles and the PEDOT: PSS matrix, leading to changes in chemical morphology and film crystallinity. The investigation of the current-voltage (I-V) relationship showed improved electrical conductivity in PEDOT: PSS films with the addition of YSZ nanoparticles, with respective conductivities of 0.028×10−6 S cm−1 and 0.0885×10−4 S cm−1 for pristine and YSZ-containing films. Additionally, the sensing properties of the PEDOT: PSS: YSZ film in detecting organic vapours were studied. These findings suggest that these conducting polymer nanocomposite thin films could potentially be used as electrolyte components in battery cells, supercapacitors, and fuel cells, as well as serve as sensors for certain organic vapours.

Highly electrically conductive MOF/conducting polymer nanocomposites toward tunable electromagnetic wave absorption

Metal-organic frameworks (MOFs) have attracted significant interest as self-templates and precursors for the synthesis of carbon-based composites aimed at electromagnetic wave (EMW) absorption. However, the utilization of high-temperature treatments has introduced uncertainties regarding the compositions and microstructures of resulting derivatives. Additionally, complete carbonization has led to diminished yields of the produced carbon composites, significantly limiting their practical applications. Consequently, the exploration of pristine MOF-based EMW absorbers presents an intriguing yet challenging endeavor, primarily due to inherently low electrical conductivity. In this study, we showcase the utilization of structurally robust Zr-MOFs as scaffolds to build highly conductive Zr-MOF/PPy composites via an inner-outer dual-modification approach, which involves the production of conducting polypyrrole (PPy) both within the confined nanoporous channels and the external surface of Zr-MOFs via post-synthetic modification. The interconnection of confined PPy and surface-lined PPy together leads to a consecutive and extensive conducting network to the maximum extent. This therefore entails outstanding conductivity up to ∼14.3 S cm−1 in Zr-MOF/PPy composites, which is approximately 1-2 orders of magnitude higher than that for conductive MOF nanocomposites constructed from either inner or outer modification. Benefiting from the strong and tunable conduction loss, as well as the induced dielectric polarization originated from the porous structures and MOF-polymer interfaces, Zr-MOF/PPy exhibits excellent microwave attenuation capabilities and a tunable absorption frequency range. Specifically, with only 15 wt.% loading, the minimum reflection loss (RLmin) can reach up to -67.4 dB, accompanied by an effective absorption bandwidth (EAB) extending to 6.74 GHz. Furthermore, the microwave absorption characteristics can be tailored from the C-band to the Ku-band by adjusting the loading of PPy. This work provides valuable insights into the fabrication of conductive MOF composites by presenting a straightforward pathway to enhance and regulate electrical conduction in MOF-based nanocomposites, thus paving a way to facilely fabricate pristine MOF-based microwave absorbers.

Static and Dynamic Mechanical Behavior of Carbon Fiber Reinforced Plastic (CFRP) Single-Lap Shear Joints Joule-Bonded with Conductive Epoxy Nanocomposites

The potential of electrically conductive graphene nanoplatelets (GNPs)/epoxy, multi-walled carbon nanotubes (MWNCTs)/epoxy and hybrid GNPs-MWCNTs/epoxy nanocomposites as adhesives for out-of-autoclave (OoA) and in-the-field CFRP repair via Joule heat curing was investigated. Scanning electron microscopy revealed a good dispersion of the nanoparticles in the matrix in all the nanocomposite adhesives above their percolation thresholds, which led to a homogeneous distribution of the heat generated during Joule CFRP repair. The joints bonded with neat epoxy and the nanocomposites showed similar lap shear strengths, with the addition of nanoparticles enhancing the fatigue performance of the adhesively bonded joints relative to when neat epoxy was used as an adhesive and oven-cured. The interfacial and cohesive failure mechanisms were found to coexist in all the cases, with an increasing dominance of the cohesive when nanofillers were embedded into the adhesive. No effect of the specific type of nanofiller incorporated into the epoxy as the conductive component was observed on the mechanical performance of the bonded joints, with the adhesives containing MWCNTs showing similar results to those filled with GNPs at considerably lower loadings due to their lower percolation thresholds. The independence of the properties regardless of the curing method highlights the promise of these Joule-cured adhesives for industrial applications.

Effects of silver nanowires and their surface modification on electromagnetic interference, transport and mechanical properties of an aerospace grade epoxy

The aerospace industry has progressively grown its use of composites. Electrically conductive nanocomposites are among important modern materials for this sector. We report on a bulk composite containing silver nanowires (AgNW) and an aerospace grade epoxy for use in carbon fiber reinforced polymers (CFRPs). AgNWs’ surfaces were also modified to enhance their ability to be dispersed in epoxy. Composites were obtained by use of three-roll milling which is of major interest for industrial applications, especially for the aerospace sector, since the process is scalable and works for aerospace grade resins with high curing temperatures. Our main objective is to improve the electromagnetic interference (EMI) shielding performance of CFRPs via improving the properties of the resin material. The addition of AgNWs did not considerably alter the flexural strength of the epoxy, however the composite with surface-modified AgNWs has a 46 % higher flexural strength. Adding AgNWs over a low threshold concentration of 0.05 wt% significantly enhanced the electrical conductivity. Conductivities above the percolation threshold lie around 102 S/m. At a concentration of 5 wt% AgNW, the EMI shielding efficiency (SE) of epoxy increased from 3.49 to 12.31 dB. Moreover, the thermal stability of the epoxy was unaffected by AgNWs. As a result, it was discovered that (surface modified) AgNWs improved the (multifunctional) capabilities of the aerospace grade epoxy resin which might be used in CFRPs to further enhance properties of composites parts, demonstrating suitability of AgNWs’ as a reinforcement material in aerospace applications.

Synthesis of PEDOT/CNTs Thermoelectric Thin Films with a High Power Factor.

In this study, we have improved the power factor of conductive polymer nanocomposites by combining layer-by-layer assembly with electrochemical deposition to produce flexible thermoelectric materials based on PEDOT/carbon nanotubes (CNTs)-films. To produce films based on CNTs and PEDOT, a dual approach has been employed: (i) the layer-by-layer method has been utilized for constructing the CNTs layer and (ii) electrochemical polymerization has been used in the synthesis of the conducting polymer. Moreover, the thermoelectric properties were optimized by controlling the experimental conditions including the number of deposition cycles and electropolymerizing time. The electrical characterization of the samples was carried out by measuring the Seebeck voltage produced under a small temperature difference and by measuring the electrical conductivity using the four-point probe method. The resulting values of the Seebeck coefficient S and σ were used to determine the power factor. The structural and morphological analyses of CNTs/PEDOT samples were carried out using scanning electron microscopy (SEM) and Raman spectroscopy. The best power factor achieved was 131.1 (μWm-1K-2), a competitive value comparable to some inorganic thermoelectric materials. Since the synthesis of the CNT/PEDOT layers is rather simple and the ingredients used are relatively inexpensive and environmentally friendly, the proposed nanocomposites are a very interesting approach as an application for recycling heat waste.

Multifunctional enhanced energy density of flexible wide-temperature supercapacitors based on MXene/PANI conductive hydrogel

Conducting polymer-based conductive hydrogels can offer adjustable electronic characteristics and superior mechanical performance, thus holding significant promise for flexible supercapacitors. However, some of such hydrogel electrodes still suffer from inferior stability, unsatisfactory energy density, and narrow temperature tolerance, which limit their widespread use in flexible supercapacitors. Herein, polyaniline was coated on the surface of Ti3C2Tx MXene flakes by in-situ chemical oxidative polymerization of aniline monomer pre-assembled on the MXene surface. The resulting MXene/PANI conductive nanofillers, Fe3+ ions, and phytic acid were introduced into the gelatin/polyacrylamide hydrogel scaffold to form highly stretchable MPGP-Fey hydrogel electrodes. Benefiting from the highly electrochemical activity of MXene/PANI conductive nanocomposite, efficient redox transition of Fe3+/Fe2+, and high open structure, the assembled all-gel symmetrical MPGP-Fey supercapacitors can achieve a maximum specific capacitance of 847 mF/cm2, an impressive energy density of 71.8 μWh/cm2, and an exceptional cyclic stability, retaining 95 % capacitance retention after 5000 cycles. The phytic acid is advantageous in lowering the freezing points of both the hydrogel electrode and electrolyte layer. The developed supercapacitors demonstrate promising temperature-adaptive properties over a wide range of −30 ∼ 90 °C. When operated at −30 °C, an impressive stable output with long-term stability of 93 % retention are achieved. With the merits of good processability, high flexibility and stretchability, the present device can serve as an optimal energy source for powering diverse electronic components in practical applications.

Review of sustainable, eco-friendly, and conductive polymer nanocomposites for electronic and thermal applications: current status and future prospects.

Biodegradable polymer nanocomposites (BPNCs) are advanced materials that have gained significant attention over the past 20 years due to their advantages over conventional polymers. BPNCs are eco-friendly, cost-effective, contamination-resistant, and tailorable for specific applications. Nevertheless, their usage is limited due to their unsatisfactory physical and mechanical properties. To improve these properties, nanofillers are incorporated into natural polymer matrices, to enhance mechanical durability, biodegradability, electrical conductivity, dielectric, and thermal properties. Despite the significant advances in the development of BPNCs over the last decades, our understanding of their dielectric, thermal, and electrical conductivity is still far from complete. This review paper aims to provide comprehensive insights into the fundamental principles behind these properties, the main synthesis, and characterization methods, and their functionality and performance. Moreover, the role of nanofillers in strength, permeability, thermal stability, biodegradability, heat transport, and electrical conductivity is discussed. Additionally, the paper explores the applications, challenges, and opportunities of BPNCs for electronic devices, thermal management, and food packaging. Finally, this paper highlights the benefits of BPNCs as biodegradable and biodecomposable functional materials to replace traditional plastics. Finally, the contemporary industrial advances based on an overview of the main stakeholders and recently commercialized products are addressed.

Intrinsic high frequency permeability of magnetic nanocomposites: uncertainty principle

The intrinsic high frequency permeability spectra of ferromagnetic conductive nanocomposites containing different volume fractions of nanoscale iron and cobalt have been simulated. A law is proposed to explain the simulated results by assuming that there are plenty of Landau–Lifshitz–Gilbert (LLG) type natural resonances contributing to the intrinsic permeability spectra. The results clearly show that the spectra strongly depend on the distribution of local effective magnetic field, the interaction between the magnetic particles, the inhomogeneous damping constant of LLG precession, and the initial equilibrium states. Especially, the effect of particles shape distribution in each sampling on the local effective magnetic field. In view of this fact: it is absolutely impossible to have the same effect from these factors when someone prepares several measurement samples, an uncertainty principle is believed to hold for measuring the intrinsic permeability of an electromagnetic (EM) composite. Therefore, this law tells us that it should be cautious when comparing or evaluating the EM properties of composites (for instance, EM wave absorbing composites). Memory effect can be used to restore the intrinsic high frequency permeability for a specific defunct composite sample.

Highly Exfoliated Boron Nitride Nanosheets via Carboxyl Nanocellulose for Thermally Conductive Nanocomposite Films

Highly Exfoliated Boron Nitride Nanosheets via Carboxyl Nanocellulose for Thermally Conductive Nanocomposite Films

Green and solvent-free fabrication of conductive halloysite–polythiophene nanocomposites for the removal of organic pollutants from aqueous media

Abstract Toxic pharmaceutical pollutants, such as nicotine, represent a significant threat to natural water sources due to their continuous discharge. To address this issue, clay minerals and their composites have demonstrated exceptional adsorptive and remedial capabilities for wastewater purification. This research focused on developing green clay-polymeric adsorbents for the efficient removal of pharmaceutical pollutants from industrial wastewater. The synthesis involves creating halloysite nanotube–polythiophene nanocomposites through a green and cost-effective method using vapour polymerization and a solvent-free, ball-milled technique for the adsorptive removal of nicotine from wastewater. The investigation evaluates the impacts of preparation, modification and environmental conditions on the adsorptive performance of these clay-based nanocomposites compared to pure polythiophene. The polymerization process was evaluated by varying the vapour polymerization holding time for a fixed amount of oxidant (FeCl3) and halloysite nanotube (HNT) to investigate the impacts of monomer vapour exposure time on the polymerization of nanocomposites. Following the characterization of the synthesized adsorbents using various methods, the study investigated the impacts of various parameters (e.g. adsorbent dosage, pH and contact time) on the adsorption capabilities of the materials on a laboratory scale. The results revealed that the incorporation of HNT improved the adsorbing performance of nanocomposites. The pH, absorbent concentration and contact time directly affect nicotine adsorption. Significantly, halloysite–polythiophene 3 with a 2 h polymerization duration demonstrated the maximum adsorption efficacy of 78.94% at pH 10 after a 24 h contact time. The environmentally friendly halloysite-based nanocomposite shows promising potential as an effective adsorbent for pharmaceutical pollutant (nicotine) removal from aquatic environments.

Novel IP2C sensors with flexible electrodes based on plasma-treated conductive elastomeric nanocomposites

Ionic polymer-metal composites (IPMC) are devices composed of metallic electrodes and an ionomeric polymer membrane in a ‘sandwich’ architecture and. Their main property is electromechanical actuation or sensing based on the movement of ions. Metallic electrodes are commonly used for their high electrical conductivity, malleability, and chemical resistance. However, the high cost of noble metals, such as platinum, long manufacturing time, and fatigue failure limit their application. Therefore, the replacement of metallic electrodes with conductive elastomeric nanocomposites (CENs) was evaluated to reduce the costs and complexity of manufacturing the device and increase its working life. In this work, carbon nanotubes were used as the conductive fillers. The dispersion to achieve high electrical conductivity was carried out directly in the synthetic or natural polyisoprene rubber latex assisted by surfactant and high-power sonication. To improve the adhesion between the elastomeric electrode and the ionic membrane (Nafion), plasma treatment with atmospheric air was applied as a surface modifier. This treatment improved the hydrophilicity and adhesion of the rubbers by forming oxygenated groups and increasing the surface nanoroughness. In this way, ionomeric polymer–polymer composite (IP2C) devices were fabricated using Nafion and plasma-modified CENs, this type of electrode is unprecedented in the literature for this application. These devices showed displacement and strain sensing capacity at levels close to the conventional IPMC in all tested frequency ranges and applied accelerations. Notably, the IP2C obtained better resolution at low frequencies than the control.

Phase-separated stretchable conductive nanocomposite to reduce contact resistance of skin electronics

Skin electronics, facilitating a high-quality interface between external devices and human skin for recording physiological and/or electrophysiological signals as well as delivering external electrical and/or mechanical energy into the human body, has shown significant progress. However, achieving mechanically conformal contact and electrically low contact resistance at the device-skin interface remains challenging. Here, we propose a material strategy to potentially address such an issue by using phase separation of silver nanowires and silver nanoparticles (Ag NWs and Ag NPs) within a stretchable conductive nanocomposite (NC). This phase-separated NC ensures low contact resistance and high conductivity, which are key requirements in skin electronics, while maintaining excellent mechanical contact with the skin. To achieve phase separation, we hydrophobically treated the surfaces of Ag NWs and Ag NPs. Then, as the NC solidified, the solvent contained in the NC was slowly evaporated to sufficiently precipitate Ag NPs within the NC. As a result, the phase-separated NC exhibited high conductivity (~ 18,535 S cm−1), excellent stretchability (~ 80%), and low contact resistance on both the top and bottom NC surfaces (average ~ 0.132 Ω). The phase-separated NC has enabled implementation of high performance skin-mounted devices, including strain sensors, electrophysiological sensors, and a wearable heater.

Tactile corpuscle-inspired piezoresistive sensors based on (3-aminopropyl) triethoxysilane-enhanced CNPs/carboxylated MWCNTs/cellulosic fiber composites for textile electronics

Recently, wearable electronic products and gadgets have developed quickly with the aim of catching up to or perhaps surpassing the ability of human skin to perceive information from the external world, such as pressure and strain. In this study, by first treating the cellulosic fiber (modal textile) substrate with (3-aminopropyl) triethoxysilane (APTES) and then covering it with conductive nanocomposites, a bionic corpuscle layer is produced. The sandwich structure of tactile corpuscle-inspired bionic (TCB) piezoresistive sensors created with the layer-by-layer (LBL) technology consists of a pressure-sensitive module (a bionic corpuscle), interdigital electrodes (a bionic sensory nerve), and a PU membrane (a bionic epidermis). The synergistic mechanism of hydrogen bond and coupling agent helps to improve the adhesive properties of conductive materials, and thus improve the pressure sensitive properties. The TCB sensor possesses favorable sensitivity (1.0005 kPa−1), a wide linear sensing range (1700 kPa), and a rapid response time (40 ms). The sensor is expected to be applied in a wide range of possible applications including human movement tracking, wearable detection system, and textile electronics.

Electrical conductivity and morphological observation of hybrid filler: Silver-graphene oxide nanocomposites for wearable antenna

Copper was formerly used for the antenna conductive patch, which was expensive, subject to multipath fading, bulky, ecologically sensitive, and difficult to manufacture. The miraculous nanotechnology of graphene has made it a feasible contender to replace copper due to its extraordinary electrical conductivity and greater strength compared to metal, all while being adaptable and flexible. As a consequence, graphene is utilized in this study to create conductive silver nanocomposites. The electrical conductivity of pressed pellets of the silver-graphene (Ag/GO) sample is measured using the four-point probe method, resulting in an electrical conductivity value of approximately 21.386 S/cm. The proposed wearable antenna is designed, measured, and fabricated, consisting of a circular patch embedded with four slots to enhance the impedance bandwidth, resonating at 2.45 GHz. Besides, the wearable antenna has achieved a high gain of 11.78 dBi and a return loss of more than −20 dB. In consideration of health and safety concerns in wearable devices, the specific absorption rate (SAR) is evaluated. The SAR is determined to be 0.9 W/kg per 10 g of tissue for an input power of 0.5 W, confirming the safety of the proposed graphene wearable antenna for use in wearable devices. These findings suggest promising prospects for the utilization of Ag/GO nanocomposites as a conductive patch for wearable antennas in wireless communication.